The smartlist_core library now contains only the parts of smartlists
that are needed for the logging library. This resolves the
circularity between "container" and "log".
The "containers" library still uses the logging code, and has the
higher-level smartlist functions.
Fixes bug 26480; bug appeared when we re-enabled the geoip tests on
windows. Bug originally introduced by our fix to 25787; bug not in
any released Tor.
This patch fixes a memory leak in disk_state_parse_commits() where if
commit is NULL, we continue the internal loop, but without ever freeing
the args variable.
See: Coverity CID 1437441.
This patch fixes a memory leak in frac_nodes_with_descriptors() where
we might return without free'ing the bandwidths variable.
See: Coverity CID 1437451.
This patch fixes a memory leak in new_establish_intro_cell() that could
happen if a test assertion fails and the *cell_out value isn't properly
free'd.
See: Coverity CID 1437445
This patch fixes a memory leak in decode_link_specifiers() where the
hs_spec variable might leak if the default label is taken in the
switch/case expression.
See: Coverity CID 1437437.
This patches fixes a memory leak in client_likes_consensus() where if
consensus_cache_entry_get_voter_id_digests() would fail we would return
without having free'd the voters list.
See: Coverity CID 1437447
This patch fixes a memory leak in hs_helper_build_hs_desc_impl() where
if a test assertion would fail we would leak the storage that `desc`
points to.
See: Coverity CID 1437448
This patch fixes a memory leak in pick_hsdir_v3() where we might return
early, but forgot to free the responsible_hsdirs variable. We solve this
by not allocating storage for responsible_hsdirs until it's actually
needed.
See: Coverity CID 1437449
This patch fixes a potential memory leak in test_hs_auth_cookies() if a
test-case fails and we goto the done label where no memory clean up is
done.
See: Coverity CID 1437453
This patch fixes a potential memory leak in
hs_helper_build_intro_point() where a `goto done` is called before the
`intro_point` variable have been assigned to the value of the `ip`
variable.
See: Coverity CID 1437460
See: Coverity CID 1437456
This patch:
- introduces an fdio module for low-level fd functions that don't
need to log.
- moves the responsibility for opening files outside of torlog.c,
so it won't need to call tor_open_cloexec.
The locking code gets its own module, since it's more fundamental
than the higher-level locking code.
Extracting the logging code was the whole point here. :)
Out-of-tree builds could fail to run the rust tests if built in
offline mode. cargo expects CARGO_HOME to point to the .cargo
directory, not the directory containing .cargo.
Fixes bug 26455; bug not in any released tor.
Includes configuration files to enforce these rules on lib and
common. Of course, "common" *is* a modularity violation right now,
so these rules aren't as strict as I would like them to be.
I am calling the crypto library "crypt_ops", since I want
higher-level crypto things to be separated from lower-level ones.
This library will hold only the low-level ones, once we have it
refactored.
When I wrote the first one of these, it needed the path of the geoip
file. But that doesn't translate well in at least two cases:
- Mingw, where the compile-time path is /c/foo/bar and the
run-time path is c:\foo\bar.
- Various CI weirdnesses, where we cross-compile a test binary,
then copy it into limbo and expect it to work.
Together, these problems precluded these tests running on windows.
So, instead let's just generate some minimal files ourselves, and
test against them.
Fixes bug 25787
Fix a memory leak where directory authorities would leak a chunk of
memory for every router descriptor every time they considered voting.
This bug was taking down directory authorities in the live network due
to out-of-memory issues.
Fixes bug 26435; bugfix on 0.3.3.6.
We'd like to feature gate code that calls C from Rust, as a workaround
to several linker issues when running `cargo test` (#25386), and we
can't feature gate anything out of test code if `cargo test` is called
with `--all-features`.
* FIXES#26400: https://bugs.torproject.org/26400
Previously we had code like this for bad things happening from
signal handlers, but it makes sense to use the same logic to handle
cases when something is happening at a level too low for log.c to be
involved.
My raw_assert*() stuff now uses this code.
We had accumulated a bunch of cruft here. Now let's only include
src and src/ext. (exception: src/trunnel is autogenerated code, and
need to include src/trunnel.)
This commit will break the build hard. The next commit will fix it.
The doctests for src/rust/crypto don't compile for multiple reasons,
including some missing exports and incorrect identifier paths. Fixes
bug 26415; bugfix on 0.3.4.1-alpha.
We need this trick because some of our Rust tests depend on our C
code, which in turn depend on other native libraries, which thereby
pulls a whole mess of our build system into "cargo test".
To solve this, we add a build script (build.rs) to set most of the
options that we want based on the contents of config.rust. Some
options can't be set, and need to go to the linker directly: we use
a linker replacement (link_rust.sh) for these. Both config.rust and
link_rust.sh are generated by autoconf for us.
This patch on its own should enough to make the crypto test build,
but not necessarily enough to make it pass.
After the big or.h refactoring, one single unit test file was missing two
headers for node_t and microdesc_t.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Due to linker issues (#25386) when testing Rust code which calls C,
all tests which touch FFI code should now be feature-gated behind the
"test-c-from-rust" flag. To run this test code, cargo must be called
with `cargo test --features="test-c-from-rust"`.
* FIXES#26398: https://bugs.torproject.org/26398
Also make sure that we're actually running the test from within the right
cwd, like we do when we're building. This seems necessary to avoid
an error when running offline.
Amusingly, it appears that we had this bug before: we just weren't
noticing it, because of bug 26258.
Some versions of GCC complain that the bfn_mock_node_get_by_id
function might return NULL, but we're assuming that it won't.
(We're assuming it won't return NULL because we know in the tests
that we're passing it valid IDs.)
To make GCC happy, tt_assert() that each node_t is set before using
it.
Fixes a second case of bug26269; bugfix on 0.3.0.1-alpha.
Here is how this changes the HSv3 client-side and service-side:
For service side we already required live consensus to upload descriptors (see
9e900d1db7) so we should never get there without
a live consensus.
For the client-side we now require a live consensus to attempt to connect to
HS. While this changes the client behavior in principle, it doesn't really
change it, because we always required live consensus to set HSDir indices, so
before this patch a client with no live consensus would try to compute
responsible HSDirs without any HSDir indices and bug out. This makes the client
behavior more consistent, by requiring a live consensus (and hence a
semi-synced clock) for the client to connect to an HS entirely.
The alternative would have been to allow setting HSDir indices with a non-live
consensus, but this would cause the various problems outlined by commit
b89d2fa1db.
There are a few reasons that relays might be uploading desciptors
without saying X-Desc-Gen-Reason:
1. They are running an old version of our software, before 0.3.2.stable.
2. They are not running our software, but they are claiming they
are.
3. They are uploading through a proxy that strips X-Desc-Gen-Reason.
4. They somehow had a bug in their software.
According to the 25686 data, 1 is the most common reason. This
ticket is an attempt to diagnose case 4, or prove that case 4
doesn't actually happen.
With the work on #25500 (reducing CPU client usage), the HS service main loop
callback is enabled as soon as the HS service map changes which happens when
registering a new service.
Unfortunately, for an ephemeral service, we were building the onion address
*after* the registration leading to the "service->onion_address` to be an
empty string.
This broke the "HS_DESC CREATED" event which had no onion address in it. And
also, we were logging an empty onion address for that service.
Fixes#25939
Signed-off-by: David Goulet <dgoulet@torproject.org>
* REFACTORS `UnvalidatedProtoEntry::from_str` to place the bulk of the
splitting/parsing logic in to a new
`UnvalidatedProtoEntry::parse_protocol_and_version_str()` method (so that
both `from_str()` and `from_str_any_len()` can call it.)
* ADD a new `UnvalidatedProtoEntry::from_str_any_len()` method in order to
maintain compatibility with consensus methods older than 29.
* ADD a limit on the number of characters in a protocol name.
* FIXES part of #25517: https://bugs.torproject.org/25517
In protover.c, the `expand_protocol_list()` function expands a `smartlist_t` of
`proto_entry_t`s to their protocol name concatenated with each version number.
For example, given a `proto_entry_t` like so:
proto_entry_t *proto = tor_malloc(sizeof(proto_entry_t));
proto_range_t *range = tor_malloc_zero(sizeof(proto_range_t));
proto->name = tor_strdup("DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa");
proto->ranges = smartlist_new();
range->low = 1;
range->high = 65536;
smartlist_add(proto->ranges, range);
(Where `[19KB]` is roughly 19KB of `"a"` bytes.) This would expand in
`expand_protocol_list()` to a `smartlist_t` containing 65536 copies of the
string, e.g.:
"DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa=1"
"DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa=2"
[…]
"DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa=65535"
Thus constituting a potential resource exhaustion attack.
The Rust implementation is not subject to this attack, because it instead
expands the above string into a `HashMap<String, HashSet<u32>` prior to #24031,
and a `HashMap<UnvalidatedProtocol, ProtoSet>` after). Neither Rust version is
subject to this attack, because it only stores the `String` once per protocol.
(Although a related, but apparently of too minor impact to be usable, DoS bug
has been fixed in #24031. [0])
[0]: https://bugs.torproject.org/24031
* ADDS hard limit on protocol name lengths in protover.c and checks in
parse_single_entry() and expand_protocol_list().
* ADDS tests to ensure the bug is caught.
* FIXES#25517: https://bugs.torproject.org/25517
* REFACTORS `UnvalidatedProtoEntry::from_str` to place the bulk of the
splitting/parsing logic in to a new
`UnvalidatedProtoEntry::parse_protocol_and_version_str()` method (so that
both `from_str()` and `from_str_any_len()` can call it.)
* ADD a new `UnvalidatedProtoEntry::from_str_any_len()` method in order to
maintain compatibility with consensus methods older than 29.
* ADD a limit on the number of characters in a protocol name.
* FIXES part of #25517: https://bugs.torproject.org/25517
In protover.c, the `expand_protocol_list()` function expands a `smartlist_t` of
`proto_entry_t`s to their protocol name concatenated with each version number.
For example, given a `proto_entry_t` like so:
proto_entry_t *proto = tor_malloc(sizeof(proto_entry_t));
proto_range_t *range = tor_malloc_zero(sizeof(proto_range_t));
proto->name = tor_strdup("DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa");
proto->ranges = smartlist_new();
range->low = 1;
range->high = 65536;
smartlist_add(proto->ranges, range);
(Where `[19KB]` is roughly 19KB of `"a"` bytes.) This would expand in
`expand_protocol_list()` to a `smartlist_t` containing 65536 copies of the
string, e.g.:
"DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa=1"
"DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa=2"
[…]
"DoSaaaaaaaaaaaaaaaaaaaaaa[19KB]aaa=65535"
Thus constituting a potential resource exhaustion attack.
The Rust implementation is not subject to this attack, because it instead
expands the above string into a `HashMap<String, HashSet<u32>` prior to #24031,
and a `HashMap<UnvalidatedProtocol, ProtoSet>` after). Neither Rust version is
subject to this attack, because it only stores the `String` once per protocol.
(Although a related, but apparently of too minor impact to be usable, DoS bug
has been fixed in #24031. [0])
[0]: https://bugs.torproject.org/24031
* ADDS hard limit on protocol name lengths in protover.c and checks in
parse_single_entry() and expand_protocol_list().
* ADDS tests to ensure the bug is caught.
* FIXES#25517: https://bugs.torproject.org/25517
Apparently, even though I had tested on OpenSSL 1.1.1 with
no-deprecated, OpenSSL 1.1.0 is different enough that I should have
tested with that as well.
Fixes bug 26156; bugfix on 0.3.4.1-alpha where we first declared
support for this configuration.
Add two new files (crypto_hkdf.c, crypto_hkdf.h) as new module of crypto.[ch].
This new module includes all functions and dependencies related to HKDF
operations. Those have been removed from crypto.[ch].
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
i don't know if whitespace is ok to have before preprocessing
directives on all platforms, but anyway we almost never have it,
so now things are more uniform.
Before this commit, the control events were never triggered. It was introduced
with commit 0c19ce7bde.
Fixes#26082
Signed-off-by: David Goulet <dgoulet@torproject.org>
We alloc/free X.509 structures in three ways:
1) X509 structure allocated with X509_new() and X509_free()
2) Fake X509 structure allocated with fake_x509_malloc() and fake_x509_free()
May contain valid pointers inside.
3) Empty X509 structure shell allocated with tor_malloc_zero() and
freed with tor_free()
The specification describes the signature token to be right after a newline
(\n) then the token "signature" and then a white-space followed by the encoded
signature.
This commit makes sure that when we parse the signature from the descriptor,
we are always looking for that extra white-space at the end of the token.
It will allow us also to support future fields that might start with
"signature".
Fixes#26069
Signed-off-by: David Goulet <dgoulet@torproject.org>
There are three cases where this can happen: changes in our
controller events, changes in our DisableNetwork setting, and
changes in our hibernation state.
Closes ticket 26063.
Two new values in each direction. DELIVERED counts valid end-to-end circuit
data that is accepted by our end and OVERHEAD counts the slack unused data in
each of the relay command cells for those accepted cells.
Control port changes are in the next commit.
We still do this time update here, since we do it from all
callbacks, but it is no longer a reason to keep the once-per-second
callback enabled.
Closes ticket 26009.
Since we're going to be disabling the second-elapsed callback, we're
going to sometimes have long periods when no events file, and so the
current second is not updated. Handle that by having a better means
to detect "clock jumps" as opposed to "being idle for a while".
Tolerate far more of the latter.
Part of #26009.
The any_client_port_set() returns true if the ControlPort is set which is
wrong because we can have that port open but still not behave as a tor client
(like many relays for instance).
Fixes#26062
Signed-off-by: David Goulet <dgoulet@torproject.org>
The options_any_client_port_set() returns true if the ControlPort is set which
is wrong because we can have that port open but still not behave as a tor
client (like many relays for instance).
Fixes#26062
Signed-off-by: David Goulet <dgoulet@torproject.org>
This functions is now used outside of networkstatus.c and makes more sense to
be in config.c.
It is also renamed to options_any_client_port_set() for the config.c
namespace.
No code behavior change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now it has a function that can tell the rest of Tor whether any
once-a-second controller item should fire, and a function to fire
all the once-a-second events.
When directory authorities read a zero-byte bandwidth file, they log
a warning with the contents of an uninitialised buffer. Log a warning
about the empty file instead.
Fixes bug 26007; bugfix on 0.2.2.1-alpha.
Remove v3 optimization which made Tor not detect disabling services.
This optimization is not so needed because we only call that function after HUP
anyway.
Fixes bug #25761.
During service configuration, rend_service_prune_list_impl_() sets
rend_service_staging_list to NULL, which blocked pruning after a HUP.
This patch initializes rend_service_staging_list when needed, so that HUP can
detect disabled onion services.
Fixes bug #25761.
Previously the coverage on this function was mostly accidental,
coming as it did from test_entryconn.c. These new tests use mocking
to ensure that we actually hit the different failure and retry cases
of addressmap_get_virtual_address(), and make our test coverage a
bit more deterministic.
Closes ticket 25993.
Previously, an authority with a clock more than 60 seconds ahead could
cause a client with a correct clock to warn that the client's clock
was behind. Now the clocks of a majority of directory authorities
have to be ahead of the client before this warning will occur.
Relax the early-consensus check so that a client's clock must be 60
seconds behind the earliest time that a given sufficiently-signed
consensus could possibly be available.
Add a new unit test that calls warn_early_consensus() directly.
Fixes bug 25756; bugfix on 0.2.2.25-alpha.
construct_consensus() in test_routerlist.c created votes using a
timestamp from time(). Tests that called construct_consensus() might
have nondeterministic results if they rely on time() not changing too
much on two successive calls.
Neither existing of the two existing tests that calls
construct_consensus is likely to have a failure due to this problem.
Included crypto_dh.h in some files in order to solve DH module dependency
issues.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Add two new files (crypto_dh.c, crypto_dh.h) as new module of crypto.[ch]. This
new module includes all functions and dependencies related to DH operations.
Those have been removed from crypto.[ch].
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
crypto_log_errors() has been moved to crypto_util.[ch]. It was duplicated in
some files so they have been removed too.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Code movement for the refactoring for ticket 24658 didn't copy the
inclusion of sys/random.h, which is needed to get a prototype for
getentropy() on macOS 10.12 Sierra. It also didn't copy the inclusion
of sys/syscall.h, which might prevent the getrandom() syscall from
being properly detected. Move these inclusions. Bug not in any
released Tor.
Our previous algorithm had a nonzero probability of picking no
events to cancel, which is of course incorrect. The new code uses
Vitter's good old reservoir sampling "algorithm R" from 1985.
Fixes bug 26008; bugfix on 0.2.6.3-alpha.
This functionality was covered only accidentally by our voting-test
code, and as such wasn't actually tested at all. The tests that
called it made its coverage nondeterministic, depending on what time
of day you ran the tests.
Closes ticket 26014.
This is needed for libressl-2.6.4 compatibility, which we broke when
we merged a15b2c57e1 to fix bug 19981. Fixes bug 26005; bug
not in any released Tor.
We cleared this value in second_elapsed_callback. But what were we
using it for? For detecting if Libevent returned EINVAL too often!
We already have a way to detect too-frequent events, and that's with
a ratelim_t. Refactor the code to use that instead. Closes ticket
26016.
From Neel's latest patch on optimizing the hs_circ_service_get_intro_circ()
digest calculation, remove an extra white-space and clarify a comment of the
legacy key digest to inform when to use it.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This function must return false if the module is not compiled in. In order to
do that, we move the authdir_mode_v3() function out of router.c and into the
dirauth module new header file named mode.h.
It is always returning false if we don't have the module.
Closes#25990
Signed-off-by: David Goulet <dgoulet@torproject.org>
This test was using the current time to pick the time period number,
and a randomly generated hs key. Therefore, it sometimes picked an
index that would wrap around the example dht, and sometimes would
not.
The fix here is just to fix the time period and the public key.
Fixes bug 25997; bugfix on 0.3.2.1-alpha.
When directory authorities read a zero-byte bandwidth file, they log
a warning with the contents of an uninitialised buffer. Log a warning
about the empty file instead.
Fixes bug 26007; bugfix on 0.2.2.1-alpha.
LibreSSL, despite not having the OpenSSL 1.1 API, does define
OPENSSL_VERSION in crypto.h. Additionally, it apparently annotates
some functions as returning NULL, so that our unit tests need to be
more careful about checking for NULL so they don't get compilation
warnings.
Closes ticket 26006.
This test, in test_client_pick_intro(), will have different coverage
depending on whether it selects a good intro point the first time or
whether it has to try a few times. Since it produces the shorter
coverage with P=1/4, repeat this test 64 times so that it only
provides reduced coverage with P=1/2^128. The performance cost is
negligible.
Closes ticket 25996. This test was introduced in 0.3.2.1-alpha.
I'd prefer not to do this for randomized tests, but as things stand
with this test, it produces nondeterministic test coverage.
Closes ticket 25995; bugfix on 0.2.2.2-alpha when this test was
introduced.
This change should make it impossible for the monotonic time to roll
over from one EWMA tick to the next during this test, and make it so
that this test never invokes scale_active_circuits() (which it
doesn't test).
(Earlier changes during the 0.3.4 series should make this call even
rarer than it was before, since we fixed#25927 and removed
cached_gettimeofday. Because this test didn't update
cached_gettimeofday, the chance of rolling over a 10-second interval
was much higher.)
Closes ticket 25994; bugfix on 0.3.3.1-alpha when this test was
introduced.
Arguably, the conditions under which these events happen should be a
bit different, but the rules are complex enough here that I've tried
to have this commit be pure refactoring.
Closes ticket 25952.
Finally, before this code goes away, take a moment to look at the
amazing way that we used to try to have an event happen
every N seconds:
get_uptime() / N != (get_uptime()+seconds_elapsed) / N
Truly, it is a thing of wonder. I'm glad we didn't start using this
pattern everywhere else.
By doing so, it is renamed to voting_schedule_recalculate_timing(). This
required a lot of changes to include voting_schedule.h everywhere that this
function was used.
This effectively now makes voting_schedule.{c|h} not include dirauth/dirvote.h
for that symbol and thus no dependency on the dirauth module anymore.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This function doesn't need to be public from the dirvote common file (which
will get renamed in future commit) so move it to dirauth/dirvote.c and make it
static.
Part of #25988
Signed-off-by: David Goulet <dgoulet@torproject.org>
It makes more sense to be in networkstatus.c so move it there and rename it
with the "networkstatus_" prefix.
Part of #25988
Signed-off-by: David Goulet <dgoulet@torproject.org>
Apparently, we can decide our state is dirty before we create the
event to tell the mainloop that we should save it. That's not a
problem, except for the assertion failure.
This requires that when a log cb happens, the event for flushing
queued events is scheduled, so we also add the necessary machinery
to have that happen.
Note that this doesn't actually help with logs from outside the main
thread, but those were already suppressed: see #25987 for a ticket
tracking that issue.
Sometimes the logging system will queue a log message for later.
When it does this, the callback will either get flushed at the next
safe time, or from the second-elapsed callback.
But we're trying to eliminate the second-elapsed callback, so let's
make a way for the log system to tell its users about this.
Commit 0f3b765b3c added
tor_assert_nonfatal_unreached() to dirvote_add_vote() and
dirvote_add_signatures() when the dirauth module is disabled.
However, they need to return a value. Furthermore, the dirvote_add_vote()
needs to set the msg_out and status_out so it can be sent back. Else,
uninitialized values would be used.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Originally, it was made public outside of the dirauth module but it is no
longer needed. In doing so, we put it back in dirvote.c and reverted its name
to the original one:
dirvote_authority_cert_dup() --> authority_cert_dup()
Signed-off-by: David Goulet <dgoulet@torproject.org>
The --disable-module-* configure option removes code from the final binary but
we still build the unit tests with the disable module(s) so we can actually
test that code path all the time and not forget about it.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This code is only for dirauth so this commit moves it into the module in
dirvote.c.
No code behavior change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Both functions are used for directory request but they can only be used if the
running tor instance is a directory authority.
For this reason, make those symbols visible but hard assert() if they are
called when the module is disabled. This would mean we failed to safeguard the
entry point into the module.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to further isolate the dirauth code into its module, this moves the
handling of the directory request GET /tor/status-vote/* into the module.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to make sr_commit_free() only used by the dirauth module, this
commits moves the commits free from a vote object into the dirvote.c file
which is now only for the module.
The function does nothing if the module is disabled.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Adds two unittests:
- First checks the path selection of basic Tor circs.
- Second checks the path selection of vanguard circs.
There is a TODO on the second unittest that we might want to test sooner than
later, but it's not trivial to do it right now.
To do these unittests we needed the following mods:
- Make some functions STATIC.
- Add some more fields to the big fake network nodes of test_entrynodes.c
- Switch fake node nicknames to base32 (because base64 does not produce valid nicknames).
This prevents a malicious RP/IP from learning the guard node in the case that
we are using only one (because we aren't using two guards, or because one of
those two guards is temporarily down).
This ensures the "strong" version of Property #6 from
https://lists.torproject.org/pipermail/tor-dev/2018-April/013098.html
(Information about the guard(s) does not leak to the website/RP at all).
The last hop in vanguard circuits can be an RP/IP/HSDir.
Since vanguard circuits are at least 3 hops (sometimes 4) before this node,
this change will not cause A - B - A paths.
When parsing a vote in routerparse.c, only dirauth extract the commits from
the vote so move all this code into dirvote.c so we can make it specific to
the dirauth module.
If the dirauth module is disabled, the commit parsing does nothing.
Signed-off-by: David Goulet <dgoulet@torproject.org>
From dirvote.c to networkstatus.c where it makes more sense both in terms of
namespace and subsystem responsability.
This removes one less dependency on the dirauth module.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add static inline dirauth public functions used outside of the dirauth module
so they can be seen by the tor code but simply do nothing.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Move most of the shared random functions that are needed outside of the
dirauth module.
At this commit, because dirvote.c hasn't been refactor, it doesn't compile
because some SR functions need a dirvote function.
Furthermore, 5 functions haven't been touched yet because they are dirauth
only but are in used in other C files than the dirauth module ones.
No code behavior change. Only moving code around.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is a pretty big commit but it only moves these files to src/or/dirauth:
dircollate.c dirvote.c shared_random.c shared_random_state.c
dircollate.h dirvote.h shared_random.h shared_random_state.h
Then many files are modified to change the include line for those header files
that have moved into a new directory.
Without using --disable-module-dirauth, everything builds fine. When using the
flag to disable the module, tor doesn't build due to linking errors. This will
be addressed in the next commit(s).
No code behavior change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove useless include.
Clearly identify functions that are used by other part of Tor, functions that
are only used by the dirauth subsystem and functions that are exposed for unit
tests.
This will help us in the dirauth modularization effort.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Many functions become static to the C file or exposed to the tests within the
PRIVATE define of dirvote.h.
This commit moves a function to the top. No code behavior change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Don't access the AuthoritativeDir options directly. We do this so we can move
authdir_mode() to the dirauth module.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Make our build system support a disable dirauth module option. It can only be
disabled explicitly with:
$ ./configure --disable-module-dirauth
If *not* specified that is enabled, an automake conditional variable is set to
true and a defined value for the C code:
AM_CONDITIONAL: BUILD_MODULE_DIRAUTH
AC_DEFINE: HAVE_MODULE_DIRAUTH=1
This introduces the dirauth/ module directory in src/or/ for which .c files
are only compiled if the BUILD_MODULE_DIRAUTH is set.
All the header files are compiled in regardless of the support so we can use
the alternative entry point functions of the dirauth subsystem.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because we rescan the main loop event list if the global map of services has
changed, this makes sure it does work.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because ADD_ONION/DEL_ONION can modify the global service map (both for v2 and
v3), we need to rescan the event list so we either enable or disable the HS
service main loop event.
Fixees #25939
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is done because it makes our life easier with unit tests. Also, a rescan
on an uninitialized event list will result in a stacktrace.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When we change the hibernation state, rescan the main loop event list because
the new state might affect the events.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Implement the ability to set flags per events which influences the set up of
the event.
This commit only adds one flag which is "need network" meaning that the event
is not enabled if tor has disabled the network or if hibernation mode.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Prior to #23100, we were not counting HS circuit build times in our
calculation of the timeout. This could lead to a condition where our timeout
was set too low, based on non HS circuit build times, and then we would
abandon all HS circuits, storing no valid timeouts in the histogram.
This commit avoids the assert.
Needed to run tests from the tarball else the geoip unit test would fail by
not finding that file.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 25374, we created the necessary post-loop event for scheduling
connection_ap_attach_pending as needed. Before that, we were
already running this event once per mainloop. There's no reason to
also run it once per second.
Closes ticket 25933. No changes file, since the relevant change is
already in 25374. Or possibly in 17590, depending on how you look
at it.
Our main function, though accurate on all platforms, can be very
slow on 32-bit hosts. This one is faster on all 32-bit hosts, and
accurate everywhere except apple, where it will typically be off by
1%. But since 32-bit apple is a relic anyway, I think we should be
fine.
Previously were using this value to have a cheap highish-resolution
timer. But we were only using it in one place, and current dogma is
to use monotime_coarse_t for this kind of thing.
This part of the code was the only part that used "cached
getttimeofday" feature, which wasn't monotonic, which we updated at
slight expense, and which I'd rather not maintain.
The clean_consdiffmgr() callback is only for relays acting as a directory
server, not all relays.
This commit adds a role for only directory server and sets the
clean_consdiffmgr() callback to use it.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We can't end up in the removed else {} condition since we first validate the
flavor we get and then we validate the flavor we parse from the given
consensus which means we can only handle the two flavors of the if/elseif
conditions.
Fixes#25914
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previously, we were ignoring values _over_ EPSILON. This bug was
also causing a warning at startup because the default value is set
to -1.0.
Fixes bug 25577; bugfix on 6b1dba214d. Bug not in any released tor.
Two helper functions to enable an event and disable an event which wraps the
launch and destroy of an event but takes care of the enabled flag.
They are also idempotent that is can be called multiple time on the same event
without effect if the event was already enabled or disabled.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In case we transitionned to a new role in Tor, we need to launch and/or
destroy some periodic events.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In tor, we have a series of possible "roles" that the tor daemon can be
enabled for. They are:
Client, Bridge, Relay, Authority (directory or bridge) and Onion service.
They can be combined sometimes. For instance, a Directory Authority is also a
Relay. This adds a "roles" field to a periodic event item object which is used
to know for which roles the event is for.
The next step is to enable the event only if the roles apply. No behavior
change at this commit.
Pars of #25762
Signed-off-by: David Goulet <dgoulet@torproject.org>
No behavior change, just to make it easier to find callbacks and for the sake
of our human brain to parse the list properly.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Consensus method 25 is the oldest one supported by any stable
version of 0.2.9, which is our current most-recent LTS. Thus, by
proposal 290, they should be removed.
This commit does not actually remove the code to implement these
methods: it only makes it so authorities will no longer support
them. I'll remove the backend code for them in later commits.
It tried to pick nodes for which only routerinfo_t items are set,
but without setting UseMicroDescriptors to 0. This won't work any
more, now that we're strict about using the right descriptor types
due to 25691/25692/25213.
In order to fix 25691 and 25692, we need to pass the "direct_conn"
flag to more places -- particularly when choosing single-hop
tunnels. The right way to do this involves having a couple more
functions accept router_crn_flags_t, rather than a big list of
boolean arguments.
This commit also makes sure that choose_good_exit_server_general()
honors the direct_conn flag, to fix 25691 and 25692.
In router_add_running_nodes_to_smartlist(), we had an inline
implementation of the logic from node_has_descriptor(), which should
be changed to node_has_preferred_descriptor().
This patch adds a new node_has_preferred_descriptor() function, and
replaces most users of node_has_descriptor() with it. That's an
important change, since as of d1874b4339 (our fix for #25213),
we are willing to say that a node has _some_ descriptor, but not the
_right_ descriptor for a particular use case.
Part of a fix for 25691 and 25692.
Now that we allow cpuworkers for dirport-only hosts (to fix 23693),
we need to allow dup_onion_keys() to succeed for them.
The change to construct_ntor_key_map() is for correctness,
but is not strictly necessary.
This is done as follows:
* Only one function (find_dl_schedule()) actually returned a
smartlist. Now it returns an int.
* The CSV_INTERVAL type has been altered to ignore everything
after the first comma, and to store the value before the first
comma in an int.
This commit won't compile. It was made with the following perl
scripts:
s/smartlist_t \*(.*)DownloadSchedule;/int $1DownloadInitialDelay;/;
s/\b(\w*)DownloadSchedule\b/$1DownloadInitialDelay/;
sizeof(ret) is the size of the pointer, not the size of what it
points to. Fortunately, we already have a function to compare
tor_addr_port_t values for equality.
Bugfix on c2c5b13e5d8a77e; bug not in any released Tor. Found by
clang's scan-build.
Now that we update our buckets on demand before reading or writing,
we no longer need to update them all every TokenBucketRefillInterval
msec.
When a connection runs out of bandwidth, we do need a way to
reenable it, however. We do this by scheduling a timer to reenable
all blocked connections for TokenBucketRefillInterval msec after a
connection becomes blocked.
(If we were using PerConnBWRate more, it might make sense to have a
per-connection timer, rather than a single timeout. But since
PerConnBWRate is currently (mostly) unused, I'm going to go for the
simpler approach here, since usually whenever one connection has
become blocked on bandwidth, most connections are blocked on
bandwidth.)
Implements ticket 25373.
Previously this was done as part of the refill callback, but there's
no real reason to do it like that. Since we're trying to remove the
refill callback completely, we can do this work as part of
record_num_bytes_transferred_impl(), which already does quite a lot
of this.
We used to do this 10x per second in connection_buckets_refill();
instead, we now do it when the bucket becomes empty. This change is
part of the work of making connection_buckets_refill() obsolete.
Closes ticket 25828; bugfix on 0.2.3.5-alpha.
We recently merged a circuit cell queue size safeguard. This commit adds the
number of killed circuits that have reached the limit to the DoS heartbeat. It
now looks like this:
[notice] DoS mitigation since startup: 0 circuits killed with too many
cells. 0 circuits rejected, 0 marked addresses. 0 connections closed. 0
single hop clients refused.
Second thing that this patch does. It makes tor always print the DoS
mitigation heartbeat line (for a relay) even though no DoS mitigation have
been enabled. The reason is because we now kill circuits that have too many
cells regardless on if it is enabled or not but also it will give the operator
a chance to learn what is enabled with the heartbeat instead of suddenly
appearing when it is enabled by let say the consensus.
Fixes#25824
Signed-off-by: David Goulet <dgoulet@torproject.org>
Unfortunately, the units passed to
monotime_coarse_stamp_units_to_approx_msec() was always 0 due to a type
conversion.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit introduces the consensus parameter "circ_max_cell_queue_size"
which controls the maximum number of cells a circuit queue should have.
The default value is currently 50000 cells which is above what should be
expected but keeps us a margin of error for padding cells.
Related to this is #9072. Back in 0.2.4.14-alpha, we've removed that limit due
to a Guard discovery attack. Ticket #25226 details why we are putting back the
limit due to the memory pressure issue on relays.
Fixes#25226
Signed-off-by: David Goulet <dgoulet@torproject.org>
Both header and code file had some indentation issues after mass renaming.
No code behavior change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Really, the uint32_t is only an optimization; any kind of unit
should work fine. Some users might want to use time_t or
monotime_coarse_t or something like that.
Begin by creating a lowest-level triple of the types needed to
implement a token bucket: a configuration, a timestamp, and the raw
bucket itself.
Note that for low-level buckets, the units of the timestamp and the
bucket itself are unspecified: each user can use a different type.
(This patch breaks check-spaces; a later patch will fix it)
This is a simple search-and-replace to rename the token bucket type
to indicate that it contains both a read and a write bucket, bundled
with their configuration. It's preliminary to refactoring the
bucket type.
This test works by having two post-loop events activate one another
in a tight loop. If the "post-loop" mechanism didn't work, this
would be enough to starve all other events.
A linked connection_t is one that gets its I/O, not from the
network, but from another connection_t. When such a connection has
something to write, we want the corresponding connection to run its
read callback ... but not immediately, to avoid infinite recursion
and/or event loop starvation.
Previously we handled this case by activating the read events
outside the event loop. Now we use the "postloop event" logic.
This lets us simplify do_main_loop_once() a little.
We've been labeling some events as happening "outside the event
loop", to avoid Libevent starvation. This patch provides a cleaner
mechanism to avoid that starvation.
For background, the problem here is that Libevent only scans for new
events once it has run all its active callbacks. So if the
callbacks keep activating new callbacks, they could potentially
starve Libevent indefinitely and keep it from ever checking for
timed, socket, or signal events.
To solve this, we add the ability to label some events as
"post-loop". The rule for a "post-loop" event is that any events
_it_ activates can only be run after libevent has re-scanned for new
events at least once.
This differs from our previous token bucket abstraction in a few
ways:
1) It is an abstraction, and not a collection of fields.
2) It is meant to be used with monotonic timestamps, which should
produce better results than calling gettimeofday over and over.
In d1874b4339, we adjusted this check so that we insist on
using routerinfos for bridges. That's almost correct... but if we
have a bridge that is also a regular relay, then we should use
insist on its routerinfo when connecting to it as a bridge
(directly), and be willing to use its microdescriptor when
connecting to it elsewhere in our circuits.
This bug is a likely cause of some (all?) of the (exit_ei == NULL)
failures we've been seeing.
Fixes bug 25691; bugfix on 0.3.3.4-alpha
When size_t is 32 bits, the unit tests can't fit anything more than
4GB-1 into a size_t.
Additionally, tt_int_op() uses "long" -- we need tt_u64_op() to
safely test uint64_t values for equality.
Bug caused by tests for #24782 fix; not in any released Tor.
This patch changes the algorithm of compute_real_max_mem_in_queues() to
use 0.4 * RAM iff the system has more than or equal to 8 GB of RAM, but
will continue to use the old value of 0.75 * RAM if the system have less
than * GB of RAM available.
This patch also adds tests for compute_real_max_mem_in_queues().
See: https://bugs.torproject.org/24782
This patch makes get_total_system_memory mockable, which allows us to
alter the return value of the function in tests.
See: https://bugs.torproject.org/24782
This one happens if for some reason you start with DirPort enabled
but server mode turned off entirely.
Fixes a case of bug 23693; bugfix on 0.3.1.1-alpha.
This roughly doubles our test coverage of the bridges.c module.
* ADD new testing module, .../src/test/test_bridges.c.
* CHANGE a few function declarations from `static` to `STATIC`.
* CHANGE one function in transports.c, transport_get_by_name(), to be
mockable.
* CLOSES#25425: https://bugs.torproject.org/25425
This patch lifts the list of default directory authorities from config.c
into their own auth_dirs.inc file, which is then included in config.c
using the C preprocessor.
Patch by beastr0.
See: https://bugs.torproject.org/24854
* ADD new /src/common/crypto_rand.[ch] module.
* ADD new /src/common/crypto_util.[ch] module (contains the memwipe()
function, since all crypto_* modules need this).
* FIXES part of #24658: https://bugs.torproject.org/24658
This module doesn't actually need to mock the libevent mainloop at
all: it can just use the regular mainloop that the test environment
sets up.
Part of ticket 23750.
This change makes cpuworker and test_workqueue no longer need to
include event2/event.h. Now workqueue.c needs to include it, but
that is at least somewhat logical here.
We are going to stop recommending 0.2.5 so there is no reason to keep the
undef statement anymore.
Fixes#20522.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Both in geoip_note_client_seen() and options_need_geoip_info(), switch from
accessing the options directly to using the should_record_bridge_info() helper
function.
Fixes#25290
Signed-off-by: David Goulet <dgoulet@torproject.org>
Next commit is addressing the circuit queue cell limit so cleanup before doing
anything else.
Part of #25226
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previously, the limit for MAX_PROTOCOLS_TO_EXPAND was actually being applied
in Rust to the maximum number of version (total, for all subprotocols).
Whereas in C, it was being applied to the number of subprotocols that were
allowed. This changes the Rust to match C's behaviour.
The behaviours still do not match, unsurprisingly, but now we know where a
primary difference is: the Rust is validating version ranges more than the C,
so in the C it's possible to call protover_all_supported on a ridiculous
version range like "Sleen=0-4294967294" because the C uses
MAX_PROTOCOLS_TO_EXPAND to count the number of *subprotocols* whereas the Rust
uses it to count the total number of *versions* of all subprotocols.
There's now no difference in these tests w.r.t. the C or Rust: both
fail miserably (well, Rust fails with nice descriptive errors, and C
gives you a traceback, because, well, C).
The DoS potential is slightly higher in C now due to some differences to the
Rust code, see the C_RUST_DIFFERS tags in src/rust/protover/tests/protover.rs.
Also, the comment about "failing at the splitting stage" in Rust wasn't true,
since when we split, we ignore empty chunks (e.g. "1--1" parses into
"(1,None),(None,1)" and "None" can't be parsed into an integer).
Finally, the comment about "Rust seems to experience an internal error" is only
true in debug mode, where u32s are bounds-checked at runtime. In release mode,
code expressing the equivalent of this test will error with
`Err(ProtoverError::Unparseable)` because 4294967295 is too large.
Previously, if "Link=1-5" was supported, and you asked protover_all_supported()
(or protover::all_supported() in Rust) if it supported "Link=3-999", the C
version would return "Link=3-999" and the Rust would return "Link=6-999". These
both behave the same now, i.e. both return "Link=6-999".
During code review and discussion with Chelsea Komlo, she pointed out
that protover::compute_for_old_tor() was a public function whose
return type was `&'static CStr`. We both agree that C-like parts of
APIs should:
1. not be exposed publicly (to other Rust crates),
2. only be called in the appropriate FFI code,
3. not expose types which are meant for FFI code (e.g. `*mut char`,
`CString`, `*const c_int`, etc.) to the pure-Rust code of other
crates.
4. FFI code (e.g. things in `ffi.rs` modules) should _never_ be called
from pure-Rust, not even from other modules in its own crate
(i.e. do not call `protover::ffi::*` from anywhere in
`protover::protoset::*`, etc).
With that in mind, this commit makes the following changes:
* CHANGE `protover::compute_for_old_tor()` to be
visible only at the `pub(crate)` level.
* RENAME `protover::compute_for_old_tor()` to
`protover::compute_for_old_tor_cstr()` to reflect the last change.
* ADD a new `protover::compute_for_old_tor()` function wrapper which
is public and intended for other Rust code to use, which returns a
`&str`.
It was changed to take borrows instead of taking ownership.
* REFACTOR `protover::ffi::protover_is_supported_here()` to use changed method
signature on `protover::is_supported_here()`.
This includes a subtle difference in behaviour to the previous Rust
implementation, where, for each vote that we're computing over, if a single one
fails to parse, we skip it. This now matches the current behaviour in the C
implementation.
* REFACTOR `protover::ffi::protover_compute_vote()` to use
new types and methods.
This includes a subtle difference in behaviour, as in 4258f1e18, where we return
(matching the C impl's return behaviour) earlier than before if parsing failed,
saving us computation in parsing the versions into a
protover::protoset::ProtoSet.
* REFACTOR `protover::ffi::protover_list_supports_protocol_or_later()` to use
new types and methods.
This includes a subtle difference in behaviour, as in 4258f1e18, where we return
(matching the C impl's return behaviour) earlier than before if parsing failed,
saving us computation in parsing the versions into a
protover::protoset::ProtoSet.
* REFACTOR `protover::ffi::protover_list_supports_protocol()` to use new types
and methods.
This includes differences in behaviour to before, which should now more closely
match the C version:
- If parsing a protover `char*` from C, and the string is not parseable, this
function will return 1 early, which matches the C behaviour when protocols
are unparseable. Previously, we would parse it and its version numbers
simultaneously, i.e. there was no fail early option, causing us to spend more
time unnecessarily parsing versions.
* REFACTOR `protover::ffi::protover_all_supported()` to use new types and
methods.
Previously, the rust implementation of protover considered an empty string to be
a valid ProtoEntry, while the C version did not (it must have a "=" character).
Other differences include that unknown protocols must now be parsed as
`protover::UnknownProtocol`s, and hence their entries as
`protover::UnvalidatedProtoEntry`s, whereas before (nearly) all protoentries
could be parsed regardless of how erroneous they might be considered by the C
version.
My apologies for this somewhat messy and difficult to read commit, if any part
is frustrating to the reviewer, please feel free to ask me to split this into
smaller changes (possibly hard to do, since so much changed), or ask me to
comment on a specific line/change and clarify how/when the behaviours differ.
The tests here should more closely match the behaviours exhibited by the C
implementation, but I do not yet personally guarantee they match precisely.
* REFACTOR unittests in protover::protover.
* ADD new integration tests for previously untested behaviour.
* FIXES part of #24031: https://bugs.torproject.org/24031.
This changes `protover::is_supported_here()` to be aware of new datatypes
(e.g. don't call `.0` on things which are no longer tuple structs) and also
changes the method signature to take borrows, making it faster, threadable, and
easier to read (i.e. the caller can know from reading the function signature
that the function won't mutate values passed into it).
* CHANGE the `protover::is_supported_here()` function to take borrows.
* REFACTOR the `protover::is_supported_here()` function to be aware of new
datatypes.
* FIXES part of #24031: https://bugs.torproject.org/24031
This adds a new type for votes upon `protover::ProtoEntry`s (technically, on
`protover::UnvalidatedProtoEntry`s, because the C code does not validate based
upon currently known protocols when voting, in order to maintain
future-compatibility), and converts several functions which would have operated
on this datatype into methods for ease-of-use and readability.
This also fixes a behavioural differentce to the C version of
protover_compute_vote(). The C version of protover_compute_vote() calls
expand_protocol_list() which checks if there would be too many subprotocols *or*
expanded individual version numbers, i.e. more than MAX_PROTOCOLS_TO_EXPAND, and
does this *per vote* (but only in compute_vote(), everywhere else in the C seems
to only care about the number of subprotocols, not the number of individual
versions). We need to match its behaviour in Rust and ensure we're not allowing
more than it would to get the votes to match.
* ADD new `protover::ProtoverVote` datatype.
* REMOVE the `protover::compute_vote()` function and refactor it into an
equivalent-in-behaviour albeit more memory-efficient voting algorithm based
on the new underlying `protover::protoset::ProtoSet` datatype, as
`ProtoverVote::compute()`.
* REMOVE the `protover::write_vote_to_string()` function, since this
functionality is now generated by the impl_to_string_for_proto_entry!() macro
for both `ProtoEntry` and `UnvalidatedProtoEntry` (the latter of which is the
correct type to return from a voting protocol instance, since the entity
voting may not know of all protocols being voted upon or known about by other
voting parties).
* FIXES part of #24031: https://bugs.torproject.org/24031
rust: Fix a difference in compute_vote() behaviour to C version.
This implements conversions from either a ProtoEntry or an UnvalidatedProtoEntry
into a String, for use in replacing such functions as
`protover::write_vote_to_string()`.
* ADD macro for implementing ToString trait for ProtoEntry and
UnvalidatedProtoEntry.
* FIXES part of #24031: https://bugs.torproject.org/24031
This adds a new protover::UnvalidatedProtoEntry type, which is the
UnknownProtocol variant of a ProtoEntry, and refactors several functions which
should operate on this type into methods.
This also fixes what was previously another difference to the C implementation:
if you asked the C version of protovet_compute_vote() to compute a single vote
containing "Fribble=", it would return NULL. However, the Rust version would
return "Fribble=" since it didn't check if the versions were empty before
constructing the string of differences. ("Fribble=" is technically a valid
protover string.) This is now fixed, and the Rust version in that case will,
analogous to (although safer than) C returning a NULL, return None.
* REMOVE internal `contains_only_supported_protocols()` function.
* REMOVE `all_supported()` function and refactor it into
`UnvalidatedProtoEntry::all_supported()`.
* REMOVE `parse_protocols_from_string_with_no_validation()` and
refactor it into the more rusty implementation of
`impl FromStr for UnvalidatedProtoEntry`.
* REMOVE `protover_string_supports_protocol()` and refactor it into
`UnvalidatedProtoEntry::supports_protocol()`.
* REMOVE `protover_string_supports_protocol_or_later()` and refactor
it into `UnvalidatedProtoEntry::supports_protocol_or_later()`.
* FIXES part of #24031: https://bugs.torproject.org/24031
rust: Fix another C/Rust different in compute_vote().
This fixes the unittest from the prior commit by checking if the versions are
empty before adding a protocol to a vote.
This replaces the `protover::SupportedProtocols` (why would you have a type just
for things which are supported?) with a new, more generic type,
`protover::ProtoEntry`, which utilises the new, more memory-efficient datatype
in protover::protoset.
* REMOVE `get_supported_protocols()` and `SupportedProtocols::tor_supported()`
(since they were never used separately) and collapse their functionality into
a single `ProtoEntry::supported()` method.
* REMOVE `SupportedProtocols::from_proto_entries()` and reimplement its
functionality as the more rusty `impl FromStr for ProtoEntry`.
* REMOVE `get_proto_and_vers()` function and refactor it into the more rusty
`impl FromStr for ProtoEntry`.
* FIXES part of #24031: https://bugs.torproject.org/24031
* ADD new type, protover::UnknownProtocol, so that we have greater type safety
and our protover functionality which works with unsanitised protocol names is
more clearly demarcated.
* REFACTOR protover::Proto, renaming it protover::Protocol to mirror the new
protover::UnknownProtocol type name.
* ADD a utility conversion of `impl From<Protocol> for UnknownProtocol` so that
we can easily with known protocols and unknown protocols simultaneously
(e.g. doing comparisons, checking their version numbers), while not allowing
UnknownProtocols to be accidentally used in functions which should only take
Protocols.
* FIXES part of #24031: https://bugs.torproject.org/24031
* ADD new protover::protoset module.
* ADD new protover::protoset::ProtoSet class for holding protover versions.
* REMOVE protover::Versions type implementation and its method
`from_version_string()`, and instead implement this behaviour in a more
rust-like manner as `impl FromStr for ProtoSet`.
* MOVE the `find_range()` utility function from protover::protover to
protover::protoset since it's only used internally in the
implementation of ProtoSet.
* REMOVE the `contract_protocol_list()` function from protover::protover and
instead refactor it (reusing nearly the entire thing, with minor superficial,
i.e. non-behavioural, changes) into a more rusty
`impl ToString for ProtoSet`.
* REMOVE the `expand_version_range()` function from protover::protover and
instead refactor it into a more rusty implementation of
`impl Into<Vec<Version>> for ProtoSet` using the new error types in
protover::errors.
* FIXES part of #24031: https://bugs.torproject.org/24031.
This will allow us to do actual error handling intra-crate in a more
rusty manner, e.g. propogating errors in match statements, conversion
between error types, logging messages, etc.
* FIXES part of #24031: https://bugs.torproject.org/24031.
Previously, the limit for MAX_PROTOCOLS_TO_EXPAND was actually being applied
in Rust to the maximum number of version (total, for all subprotocols).
Whereas in C, it was being applied to the number of subprotocols that were
allowed. This changes the Rust to match C's behaviour.
The behaviours still do not match, unsurprisingly, but now we know where a
primary difference is: the Rust is validating version ranges more than the C,
so in the C it's possible to call protover_all_supported on a ridiculous
version range like "Sleen=0-4294967294" because the C uses
MAX_PROTOCOLS_TO_EXPAND to count the number of *subprotocols* whereas the Rust
uses it to count the total number of *versions* of all subprotocols.
There's now no difference in these tests w.r.t. the C or Rust: both
fail miserably (well, Rust fails with nice descriptive errors, and C
gives you a traceback, because, well, C).
The DoS potential is slightly higher in C now due to some differences to the
Rust code, see the C_RUST_DIFFERS tags in src/rust/protover/tests/protover.rs.
Also, the comment about "failing at the splitting stage" in Rust wasn't true,
since when we split, we ignore empty chunks (e.g. "1--1" parses into
"(1,None),(None,1)" and "None" can't be parsed into an integer).
Finally, the comment about "Rust seems to experience an internal error" is only
true in debug mode, where u32s are bounds-checked at runtime. In release mode,
code expressing the equivalent of this test will error with
`Err(ProtoverError::Unparseable)` because 4294967295 is too large.
Previously, if "Link=1-5" was supported, and you asked protover_all_supported()
(or protover::all_supported() in Rust) if it supported "Link=3-999", the C
version would return "Link=3-999" and the Rust would return "Link=6-999". These
both behave the same now, i.e. both return "Link=6-999".
During code review and discussion with Chelsea Komlo, she pointed out
that protover::compute_for_old_tor() was a public function whose
return type was `&'static CStr`. We both agree that C-like parts of
APIs should:
1. not be exposed publicly (to other Rust crates),
2. only be called in the appropriate FFI code,
3. not expose types which are meant for FFI code (e.g. `*mut char`,
`CString`, `*const c_int`, etc.) to the pure-Rust code of other
crates.
4. FFI code (e.g. things in `ffi.rs` modules) should _never_ be called
from pure-Rust, not even from other modules in its own crate
(i.e. do not call `protover::ffi::*` from anywhere in
`protover::protoset::*`, etc).
With that in mind, this commit makes the following changes:
* CHANGE `protover::compute_for_old_tor()` to be
visible only at the `pub(crate)` level.
* RENAME `protover::compute_for_old_tor()` to
`protover::compute_for_old_tor_cstr()` to reflect the last change.
* ADD a new `protover::compute_for_old_tor()` function wrapper which
is public and intended for other Rust code to use, which returns a
`&str`.
It was changed to take borrows instead of taking ownership.
* REFACTOR `protover::ffi::protover_is_supported_here()` to use changed method
signature on `protover::is_supported_here()`.
This includes a subtle difference in behaviour to the previous Rust
implementation, where, for each vote that we're computing over, if a single one
fails to parse, we skip it. This now matches the current behaviour in the C
implementation.
* REFACTOR `protover::ffi::protover_compute_vote()` to use
new types and methods.
This includes a subtle difference in behaviour, as in 4258f1e18, where we return
(matching the C impl's return behaviour) earlier than before if parsing failed,
saving us computation in parsing the versions into a
protover::protoset::ProtoSet.
* REFACTOR `protover::ffi::protover_list_supports_protocol_or_later()` to use
new types and methods.
This includes a subtle difference in behaviour, as in 4258f1e18, where we return
(matching the C impl's return behaviour) earlier than before if parsing failed,
saving us computation in parsing the versions into a
protover::protoset::ProtoSet.
* REFACTOR `protover::ffi::protover_list_supports_protocol()` to use new types
and methods.
This includes differences in behaviour to before, which should now more closely
match the C version:
- If parsing a protover `char*` from C, and the string is not parseable, this
function will return 1 early, which matches the C behaviour when protocols
are unparseable. Previously, we would parse it and its version numbers
simultaneously, i.e. there was no fail early option, causing us to spend more
time unnecessarily parsing versions.
* REFACTOR `protover::ffi::protover_all_supported()` to use new types and
methods.
Previously, the rust implementation of protover considered an empty string to be
a valid ProtoEntry, while the C version did not (it must have a "=" character).
Other differences include that unknown protocols must now be parsed as
`protover::UnknownProtocol`s, and hence their entries as
`protover::UnvalidatedProtoEntry`s, whereas before (nearly) all protoentries
could be parsed regardless of how erroneous they might be considered by the C
version.
My apologies for this somewhat messy and difficult to read commit, if any part
is frustrating to the reviewer, please feel free to ask me to split this into
smaller changes (possibly hard to do, since so much changed), or ask me to
comment on a specific line/change and clarify how/when the behaviours differ.
The tests here should more closely match the behaviours exhibited by the C
implementation, but I do not yet personally guarantee they match precisely.
* REFACTOR unittests in protover::protover.
* ADD new integration tests for previously untested behaviour.
* FIXES part of #24031: https://bugs.torproject.org/24031.
This changes `protover::is_supported_here()` to be aware of new datatypes
(e.g. don't call `.0` on things which are no longer tuple structs) and also
changes the method signature to take borrows, making it faster, threadable, and
easier to read (i.e. the caller can know from reading the function signature
that the function won't mutate values passed into it).
* CHANGE the `protover::is_supported_here()` function to take borrows.
* REFACTOR the `protover::is_supported_here()` function to be aware of new
datatypes.
* FIXES part of #24031: https://bugs.torproject.org/24031
This adds a new type for votes upon `protover::ProtoEntry`s (technically, on
`protover::UnvalidatedProtoEntry`s, because the C code does not validate based
upon currently known protocols when voting, in order to maintain
future-compatibility), and converts several functions which would have operated
on this datatype into methods for ease-of-use and readability.
This also fixes a behavioural differentce to the C version of
protover_compute_vote(). The C version of protover_compute_vote() calls
expand_protocol_list() which checks if there would be too many subprotocols *or*
expanded individual version numbers, i.e. more than MAX_PROTOCOLS_TO_EXPAND, and
does this *per vote* (but only in compute_vote(), everywhere else in the C seems
to only care about the number of subprotocols, not the number of individual
versions). We need to match its behaviour in Rust and ensure we're not allowing
more than it would to get the votes to match.
* ADD new `protover::ProtoverVote` datatype.
* REMOVE the `protover::compute_vote()` function and refactor it into an
equivalent-in-behaviour albeit more memory-efficient voting algorithm based
on the new underlying `protover::protoset::ProtoSet` datatype, as
`ProtoverVote::compute()`.
* REMOVE the `protover::write_vote_to_string()` function, since this
functionality is now generated by the impl_to_string_for_proto_entry!() macro
for both `ProtoEntry` and `UnvalidatedProtoEntry` (the latter of which is the
correct type to return from a voting protocol instance, since the entity
voting may not know of all protocols being voted upon or known about by other
voting parties).
* FIXES part of #24031: https://bugs.torproject.org/24031
rust: Fix a difference in compute_vote() behaviour to C version.
This implements conversions from either a ProtoEntry or an UnvalidatedProtoEntry
into a String, for use in replacing such functions as
`protover::write_vote_to_string()`.
* ADD macro for implementing ToString trait for ProtoEntry and
UnvalidatedProtoEntry.
* FIXES part of #24031: https://bugs.torproject.org/24031
This adds a new protover::UnvalidatedProtoEntry type, which is the
UnknownProtocol variant of a ProtoEntry, and refactors several functions which
should operate on this type into methods.
This also fixes what was previously another difference to the C implementation:
if you asked the C version of protovet_compute_vote() to compute a single vote
containing "Fribble=", it would return NULL. However, the Rust version would
return "Fribble=" since it didn't check if the versions were empty before
constructing the string of differences. ("Fribble=" is technically a valid
protover string.) This is now fixed, and the Rust version in that case will,
analogous to (although safer than) C returning a NULL, return None.
* REMOVE internal `contains_only_supported_protocols()` function.
* REMOVE `all_supported()` function and refactor it into
`UnvalidatedProtoEntry::all_supported()`.
* REMOVE `parse_protocols_from_string_with_no_validation()` and
refactor it into the more rusty implementation of
`impl FromStr for UnvalidatedProtoEntry`.
* REMOVE `protover_string_supports_protocol()` and refactor it into
`UnvalidatedProtoEntry::supports_protocol()`.
* REMOVE `protover_string_supports_protocol_or_later()` and refactor
it into `UnvalidatedProtoEntry::supports_protocol_or_later()`.
* FIXES part of #24031: https://bugs.torproject.org/24031
rust: Fix another C/Rust different in compute_vote().
This fixes the unittest from the prior commit by checking if the versions are
empty before adding a protocol to a vote.
This replaces the `protover::SupportedProtocols` (why would you have a type just
for things which are supported?) with a new, more generic type,
`protover::ProtoEntry`, which utilises the new, more memory-efficient datatype
in protover::protoset.
* REMOVE `get_supported_protocols()` and `SupportedProtocols::tor_supported()`
(since they were never used separately) and collapse their functionality into
a single `ProtoEntry::supported()` method.
* REMOVE `SupportedProtocols::from_proto_entries()` and reimplement its
functionality as the more rusty `impl FromStr for ProtoEntry`.
* REMOVE `get_proto_and_vers()` function and refactor it into the more rusty
`impl FromStr for ProtoEntry`.
* FIXES part of #24031: https://bugs.torproject.org/24031
* ADD new type, protover::UnknownProtocol, so that we have greater type safety
and our protover functionality which works with unsanitised protocol names is
more clearly demarcated.
* REFACTOR protover::Proto, renaming it protover::Protocol to mirror the new
protover::UnknownProtocol type name.
* ADD a utility conversion of `impl From<Protocol> for UnknownProtocol` so that
we can easily with known protocols and unknown protocols simultaneously
(e.g. doing comparisons, checking their version numbers), while not allowing
UnknownProtocols to be accidentally used in functions which should only take
Protocols.
* FIXES part of #24031: https://bugs.torproject.org/24031
* ADD new protover::protoset module.
* ADD new protover::protoset::ProtoSet class for holding protover versions.
* REMOVE protover::Versions type implementation and its method
`from_version_string()`, and instead implement this behaviour in a more
rust-like manner as `impl FromStr for ProtoSet`.
* MOVE the `find_range()` utility function from protover::protover to
protover::protoset since it's only used internally in the
implementation of ProtoSet.
* REMOVE the `contract_protocol_list()` function from protover::protover and
instead refactor it (reusing nearly the entire thing, with minor superficial,
i.e. non-behavioural, changes) into a more rusty
`impl ToString for ProtoSet`.
* REMOVE the `expand_version_range()` function from protover::protover and
instead refactor it into a more rusty implementation of
`impl Into<Vec<Version>> for ProtoSet` using the new error types in
protover::errors.
* FIXES part of #24031: https://bugs.torproject.org/24031.
This will allow us to do actual error handling intra-crate in a more
rusty manner, e.g. propogating errors in match statements, conversion
between error types, logging messages, etc.
* FIXES part of #24031: https://bugs.torproject.org/24031.
When a relay is collecting internal statistics about how many
create cell requests it has seen of each type, accurately count the
requests from relays that temporarily fall out of the consensus.
(To be extra conservative, we were already ignoring requests from clients
in our counts, and we continue ignoring them here.)
Fixes bug 24910; bugfix on 0.2.4.17-rc.
Directory authorities no longer vote in favor of the Guard flag
for relays that don't advertise directory support.
Starting in Tor 0.3.0.1-alpha, Tor clients have been avoiding using
such relays in the Guard position, leading to increasingly broken load
balancing for the 5%-or-so of Guards that don't advertise directory
support.
Fixes bug 22310; bugfix on 0.3.0.6.
Add a missing lock acquisition around access to queued_control_events
in control_free_all(). Use the reassign-and-unlock strategy as in
queued_events_flush_all(). Fixes bug 25675. Coverity found this bug,
but only after we recently added an access to
flush_queued_event_pending.
The earlier checks in this function should ensure that components is
always nonempty. But in case somebody messes with them in the
future, let's add an extra check to make sure we aren't crashing.
Coverity found a null pointer reference in nodelist_add_microdesc().
This is almost certainly impossible assuming that the routerstatus_t
returned by router_get_consensus_status_by_descriptor_digest() always
corresponds to an entry in the nodelist. Fixes bug 25629.
Coverity found a null pointer reference in nodelist_add_microdesc().
This is almost certainly impossible assuming that the routerstatus_t
returned by router_get_consensus_status_by_descriptor_digest() always
corresponds to an entry in the nodelist. Fixes bug 25629.
Coverity found a null pointer reference in nodelist_add_microdesc().
This is almost certainly impossible assuming that the routerstatus_t
returned by router_get_consensus_status_by_descriptor_digest() always
corresponds to an entry in the nodelist. Fixes bug 25629.
If we failed to connect at the TCP level to a relay, note it down and refuse
to connect again for another 60 seconds.
Fixes#24767
Signed-off-by: David Goulet <dgoulet@torproject.org>
This update is needed to make it consistent with the behavior of
node_awaiting_ipv6(), which doesn't believe in the addresses from
routerinfos unless it actually plans to use those routerinfos.
Fixes bug 25213; bugfix on b66b62fb75 in 0.3.3.1-alpha,
which tightened up the definition of node_awaiting_ipv6().
There was a nonfatal assertion in pathbias_should_count that would
trigger if onehop_tunnel was set, but the desired_path_length was
greater than 1. This patch fixes that. Fixes bug 24903; bugfix on
0.2.5.2-alpha.
These tests handle incoming and outgoing cells on a three-hop
circuit, and make sure that the crypto works end-to-end. They don't
yet test spec conformance, leaky-pipe, or various error cases.
Make sure we actually only report client channel to the geoip cache instead of
looking if it is a known relay. Looking if it is a known relay can be
unreliable because they come and go from the consensus.
Fixes#24904
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because of #25306 for which we are unable to reproduce nor understand how it
is possible, this commit removes the asserts() and BUG() on the missing
descriptors instead when rotating them.
This allows us to log more data on error but also to let tor recover
gracefully instead of dying.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch adds some additional logging to circuits_handle_oom() to give
us more information about which specific compression backend that is
using a certain amount of memory.
See: https://bugs.torproject.org/25372
These declarations need to exist unconditionally, but they were
trapped inside an "#else /* !(defined(HAVE_SYSLOG_H)) */" block.
Fixes a travis regression caused by 23881; bug not in any released tor.
Additionally, this change extracts the functions that created and
freed these elements.
These structures had common "forward&reverse stream&digest"
elements, but they were initialized and freed through cpath objects,
and different parts of the code depended on them. Now all that code
is extacted, and kept in relay_crypto.c
This should help us improve modularity, and should also make it
easier for people to experiment with other relay crypto strategies
down the road.
This commit is pure function movement.
This function is used upon receiving a cell, and only handles the
decrypting part. The encryption part is currently handled inside
circuit_package_relay_cell.
This should avoid most intermittent test failures on developer and CI machines,
but there could (and probably should) be a more elegant solution.
Also, this test was testing that the IP was created and its expiration time was
set to a time greater than or equal to `now+INTRO_POINT_LIFETIME_MIN_SECONDS+5`:
/* Time to expire MUST also be in that range. We add 5 seconds because
* there could be a gap between setting now and the time taken in
* service_intro_point_new. On ARM, it can be surprisingly slow... */
tt_u64_op(ip->time_to_expire, OP_GE,
now + INTRO_POINT_LIFETIME_MIN_SECONDS + 5);
However, this appears to be a typo, since, according to the comment above it,
adding five seconds was done because the IP creation can be slow on some
systems. But the five seconds is added to the *minimum* time we're comparing
against, and so it actually functions to make this test *more* likely to fail on
slower systems. (It should either subtract five seconds, or instead add it to
time_to_expire.)
* FIXES#25450: https://bugs.torproject.org/25450
These were meant to demonstrate old behavior, or old rust behavior.
One of them _should_ work in Rust, but won't because of
implementation details. We'll fix that up later.
The C code and the rust code had different separate integer overflow
bugs here. That suggests that we're better off just forbidding this
pathological case.
Also, add tests for expected behavior on receiving a bad protocol
list in a consensus.
Fixes another part of 25249.
I've refactored these to be a separate function, to avoid tricky
merge conflicts.
Some of these are disabled with "XXXX" comments; they should get
fixed moving forward.
This one can only be exploited if you can generate a correctly
signed consensus, so it's not as bad as 25074.
Fixes bug 25251; also tracked as TROVE-2018-004.
In some cases we had checked for it, but in others we had not. One
of these cases could have been used to remotely cause
denial-of-service against directory authorities while they attempted
to vote.
Fixes TROVE-2018-001.
* ADD includes for "torint.h" and "container.h" to crypto_digest.h.
* ADD includes for "crypto_digest.h" to a couple places in which
crypto_digest_t was then missing.
* FIXES part of #24658: https://bugs.torproject.org/24658#comment:30
Folks have found two in the past week or so; we may as well fix the
others.
Found with:
\#!/usr/bin/python3
import re
def findMulti(fname):
includes = set()
with open(fname) as f:
for line in f:
m = re.match(r'^\s*#\s*include\s+["<](\S+)[>"]', line)
if m:
inc = m.group(1)
if inc in includes:
print("{}: {}".format(fname, inc))
includes.add(m.group(1))
import sys
for fname in sys.argv[1:]:
findMulti(fname)
We moved the crypto_pk_obselete_* functions into crypto_rsa.[ch] because they fit
better with the RSA module.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
since all it does is produce false positives
this commit should get merged into 0.2.9 and 0.3.0 *and* 0.3.1, even
though the code in the previous commit is already present in 0.3.1. sorry
for the mess.
[Cherry-picked]
since all it does is produce false positives
this commit should get merged into 0.2.9 and 0.3.0 *and* 0.3.1, even
though the code in the previous commit is already present in 0.3.1. sorry
for the mess.
This commit takes a piece of commit af8cadf3a9 and a piece of commit
46fe353f25, with the goal of making channel_is_client() be based on what
sort of connection handshake the other side used, rather than seeing
whether the other side ever sent a create_fast cell to us.
We moved the crypto_pk_* digest functions into crypto_rsa.[ch] because they fit
better with the RSA module.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Also correct MAX_VERSIONS_TO_EXPAND to match the C.
NOTE that this patch leads to incorrect behavior: the C code allows
huge ranges; it just doesn't allow votes on them (currently). For
full compatibility, we'll need to make the rust code store ranges as
ranges natively, possibly using something like the range_map crate.
Still, this patch is smaller than a "proper" fix.
Fixes TROVE-2018-003.
Since 0.2.4, tor uses EWMA circuit policy to prioritize. The previous
algorithm, round-robin, hasn't been used since then but was still used as a
fallback.
Now that EWMA is mandatory, remove that code entirely and enforce a cmux
policy to be set.
This is part of a circuitmux cleanup to improve performance and reduce
complexity in the code. We'll be able to address future optimization with this
work.
Closes#25268
Signed-off-by: David Goulet <dgoulet@torproject.org>
The reason to do so is because these functions haven't been used in years so
since 0.2.4, every callsite is NOP.
In future commits, we'll remove the round robin circuit policy which is mostly
validated within those function.
This simplifies the code greatly and remove dead code for which we never had a
configure option in the first place nor an easy way to use them in production.
Part of #25268
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is rename to something more meaningful that explains what it does exactly
which is sets the EWMA options (currently only one exists). The new name is
cmux_ewma_set_options().
Also, remove a public function from circuitmux_ewma.h that is only used in the
C file. Make it static inline as well.
Signed-off-by: David Goulet <dgoulet@torproject.org>
To achieve this, a default value for the CircuitPriorityHalflife option was
needed. We still look in the options and then the consensus but in case no
value can be found, the default CircuitPriorityHalflifeMsec=30000 is used. It
it the value we've been using since 0.2.4.4-alpha.
This means that EWMA, our only policy, can not be disabled anymore fallbacking
to the round robin algorithm. Unneeded code to control that is removed in this
commit.
Part of #25268
Signed-off-by: David Goulet <dgoulet@torproject.org>
We had this safeguard around dos_init() but not when the consensus changes
which can modify consensus parameters and possibly enable the DoS mitigation
even if tor wasn't a public relay.
Fixes#25223
Signed-off-by: David Goulet <dgoulet@torproject.org>
Explicitly inform the operator of the rejected relay to set a valid email
address in the ContactInfo field and contact bad-relays@ mailing list.
Fixes#25170
Signed-off-by: David Goulet <dgoulet@torproject.org>
We don't expect this to come up very much, but we may as well make
sure that the value isn't predictable (as we do for the other
addresses) in case the issue ever comes up.
Spotted by teor.
This patch lowers the log-level from warning to info in the cases where
we are going to attempt another method as entropy source to hopefully
make the user feel less concerned.
See: https://bugs.torproject.org/25120
* ADD a new macro, tor_util::string::cstr!() which takes Rust strings,
concatenates them together, appends a NUL byte, and converts it into a
std::ffi::CStr for handing to C.
This is to avoid positively identifying Exit relays if tor client connection
comes from them that is reentering the network.
One thing to note is that this is done only in the DoS subsystem but we'll
still add it to the geoip cache as a "client" seen. This is done that way so
to avoid as much as possible changing the current behavior of the geoip client
cache since this is being backported.
Closes#25193
Signed-off-by: David Goulet <dgoulet@torproject.org>
Rationale: this helps for performance only, but we don't actually
have any reason to think that the checks here are
performance-critical. Let's not normalize the use of unsafe {}.
Explicitly inform the operator of the rejected relay to set a valid email
address in the ContactInfo field and contact bad-relays@ mailing list.
Fixes#25170
Signed-off-by: David Goulet <dgoulet@torproject.org>
* FIXES#25127: https://bugs.torproject.org/25127
* ADDS a new module to the Rust tor_util crate for small utilities
for working with static strings between languages.
* CHANGES the return type of protover_compute_for_old_tor to point to
immutable data.
* CHANGES the code from the previous commit to use the new static
string utilities.
At this commit, the SocksSocketsGroupWritable option is renamed to
UnixSocksGroupWritable. A deprecated warning is triggered if the old option is
used and tor will use it properly.
Fixes#24343
Signed-off-by: David Goulet <dgoulet@torproject.org>
On slow system, 1 msec between one read and the other was too tight. For
instance, it failed on armel with a 4msec gap:
https://buildd.debian.org/status/package.php?p=tor&suite=experimental
Increase to 10 msec for now to address slow system. It is important that we
keep this OP_LE test in so we make sure the msec/usec/nsec read aren't
desynchronized by huge gaps. We'll adjust again if we ever encounter a system
that goes slower than 10 msec between calls.
Fixes#25113
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove a series of connection counters that were only used when dumping the
rephist statistics with SIGUSR1 signal.
This reduces the or_history_t structure size.
Closes#25163
Signed-off-by: David Goulet <dgoulet@torproject.org>
This removes the code that tracks the extend attemps a client makes. We don't
use it and it was only used to provide statistics on a SIGUSR1 from the
rephist dump stats function.
Part of #25163
Signed-off-by: David Goulet <dgoulet@torproject.org>
Since we're making it so that unstable zstd apis can be disabled,
we need to test them. I do this by adding a variant setup/cleanup
function for the tests, and teaching it about a fake compression
method called "x-zstd:nostatic".
Services can keep rendezvous circuits for a while so don't log them if tor is
a single onion service.
Fixes#25116
Signed-off-by: David Goulet <dgoulet@torproject.org>
The HT_FOREACH() is insanely heavy on the CPU and this is part of the fast
path so make it return the nice memory size counter we added in
4d812e29b9.
Fixes#25148
Signed-off-by: David Goulet <dgoulet@torproject.org>
Included crypto_digest.[ch] into include.am in order to solve a compiling
issue. Also EOF line in crypto_digest.c added.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Included crypto_digest.h in some files in order to solve xof+digest module
dependency issues. Removed crypto.h where it isn't needed anymore.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Add two new files (crypto_digest.c, crypto_digest.h) as new module of
crypto.[ch]. This new module includes all functions and dependencies related
to digest and xof operations. Those have been removed from crypto.[ch].
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Becasue the circuit creation burst and rate can change at runtime it is
possible that between two refill of a bucket, we end up setting the bucket
value to less than there currently is.
Fixes#25128
Signed-off-by: David Goulet <dgoulet@torproject.org>
If the cache is using 20% of our maximum allowed memory, clean 10% of it. Same
behavior as the HS descriptor cache.
Closes#25122
Signed-off-by: David Goulet <dgoulet@torproject.org>
The current code flow makes it that we can release a channel in a PENDING
state but not in the pending list. This happens while the channel is being
processed in the scheduler loop.
Fixes#25125
Signed-off-by: David Goulet <dgoulet@torproject.org>
This tests many cases of the KIST scheduler with the pending list state by
calling entry point in the scheduler while channels are scheduled or not.
Also, it adds a test for the bug #24700.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch makes the wording around error cases for selecting an entropy
source in Tor slightly more verbose. We also let the user know when
something goes wrong that we are trying out a fallback method instead.
See: https://bugs.torproject.org/25120
Included crypto_rsa.[ch] into include.am in order to resolve a compiling issue.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
crypto_get_rsa_padding_overhead() and crypto_get_rsa_padding() are
not static inline anymore in order to split the crypto_rsa module
from crypto.[ch].
Also included necessary modules in order to solve dependency issues.
Also made two functions in crypto.c use crypto_pk_asn1_encdoe()
instead of reaching into the crypto_pk_t struct.
This reverts commit 9a06282546.
It appears that I misunderstood how the seccomp2 filter rules
interact. It appears that `SCMP_ACT_ERRNO()` always takes
precedence over `SCMP_ACT_ALLOW()` -- I had thought instead that
earlier rules would override later ones. But this change caused bug
25115 (not in any released Tor).
The accurate address of a connection is real_addr, not the addr member.
channel_tls_get_remote_addr_method() now returns real_addr instead.
Fixes#24952; bugfix on 707c1e2 in 0.2.4.11-alpha.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Tor preemptiely builds circuits and they can be cannibalized later in their
lifetime. A Guard node can become unusable (from our guard state) but we can
still have circuits using that node opened. It is important to not pick those
circuits for any usage through the cannibalization process.
Fixes#24469
Signed-off-by: David Goulet <dgoulet@torproject.org>
These are no longer meaningful, since there's no longer an upper
limit to how many times (in the exponential-backoff world) one can
retry a download. download_status_is_ready() didn't check these any
more, and neither do we.
In 0.3.2.1-alpha, we've added notify_networkstatus_changed() in order to have
a way to notify other subsystems that the consensus just changed. The old and
new consensus are passed to it.
Before this patch, this was done _before_ the new consensus was set globally
(thus NOT accessible by getting the latest consensus). The scheduler
notification was assuming that it was set and select_scheduler() is looking at
the latest consensus to get the parameters it might needs. This was very wrong
because at that point it is still the old consensus set globally.
This commit changes the notify_networkstatus_changed() to be the "before"
function and adds an "after" notification from which the scheduler subsystem
is notified.
Fixes#24975
When we stopped looking at the "protocols" variable directly, we
broke the hs_service/build_update_descriptors test, since it didn't
actually update any of the flags.
The fix here is to call summarize_protover_flags() from that test,
and to expose summarize_protover_flags() as "STATIC" from
routerparse.c.
This is the quick fix that is keeping the channel in PENDING state so if we
ever try to reschedule the same channel, it won't happened.
Fixes#24700
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is possible in normal circumstances that a client fetches a descriptor
that has a lower revision counter than the one in its cache. This can happen
due to HSDir desync.
Fixes#24976
Signed-off-by: David Goulet <dgoulet@torproject.org>
Setting the default for this at 10 and the learning timeout to 3 minutes means
we will complete our cbt learning in 30 minutes, which is under the reduced
padding connection timeout window.
In 0.3.2.1-alpha, we've added this function in order to have a way to notify
other subsystems that the consensus just changed. The old consensus and the
new one are passed to it.
Before this patch, this was done _before_ the new consensus was set globally
(thus NOT accessible by getting the latest consensus). The scheduler
notification was assuming that it was set and select_scheduler() is looking at
the latest consensus to get the parameters it might needs. This was very wrong
because at that point it is still the old consensus set globally.
With this commit, notify_networkstatus_changed() has been moved _after_ the
new consensus is set globally. The main obvious reasons is to fix the bug
described above and in #24975. The other reason is that this notify function
doesn't return anything which could be allowing the possibility of refusing to
set the new consensus on error. In other words, the new consensus is set right
after the notification whatever happens.
It does no harm or change in behavior to set the new consensus first and then
notify the subsystems. The two functions currently used are for the control
port using the old and new consensus and sending the diff. The second is the
scheduler that needs the new consensus to be set globally before being called.
Of course, the function has been documented accordinly to clearly state it is
done _after_ the new consensus is set.
Fixes#24975
Signed-off-by: David Goulet <dgoulet@torproject.org>
Stop adding unneeded channel padding right after we finish flushing
to a connection that has been trying to flush for many seconds.
Instead, treat all partial or complete flushes as activity on the
channel, which will defer the time until we need to add padding.
This fix should resolve confusing and scary log messages like
"Channel padding timeout scheduled 221453ms in the past."
Fixes bug 22212; bugfix on 0.3.1.1-alpha.
I think technically we could resolve bug 22212 by adding a call to
channel_timestamp_active() only in the finished_flushing case. But I added
a call in the flushed_some case too since that seems to more accurately
reflect the notion of "active".
Using get_uptime() and reset_uptime() instead of
accessing stats_n_seconds_working directly.
stats_n_seconds_working is not extern anymore.
Ticket #25081
Because this touches too many commits at once, it is made into one single
commit.
Remove the use of "tenths" for the circuit rate to simplify things. We can
only refill the buckets at best once every second because of the use of
approx_time() and our token system is set to be 1 token = 1 circuit so make
the rate a flat integer of circuit per second.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Imagine this scenario. We had 10 connections over the 24h lifetime of a geoip
cache entry. The lifetime of the entry has been reached so it is about to get
freed but 2 connections remain for it. After the free, a third connection
comes in thus making us create a new geoip entry for that address matching the
2 previous ones that are still alive. If they end up being closed, we'll have
a concurrent count desynch from what the reality is.
To mitigate this probably very rare scenario in practice, when we free a geoip
entry and it has a concurrent count above 0, we'll go over all connections
matching the address and clear out the tracked flag. So once they are closed,
we don't try to decrement the count.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This option refuses any ESTABLISH_RENDEZVOUS cell arriving from a client
connection. Its default value is "auto" for which we can turn it on or off
with a consensus parameter. Default value is 0.
Signed-off-by: David Goulet <dgoulet@torproject.org>
If the client address was detected as malicious, apply a defense which is at
this commit to return a DESTROY cell.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a function that notifies the DoS subsystem that a new CREATE cell has
arrived. The statistics are updated accordingly and the IP address can also be
marked as malicious if it is above threshold.
At this commit, no defense is applied, just detection with a circuit creation
token bucket system.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Implement a basic connection tracking that counts the number of concurrent
connections when they open and close.
This commit also adds the circuit creation mitigation data structure that will
be needed at later commit to keep track of the circuit rate.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit introduces the src/or/dos.{c|h} files that contains the code for
the Denial of Service mitigation subsystem. It currently contains basic
functions to initialize and free the subsystem. They are used at this commit.
The torrc options and consensus parameters are defined at this commit and
getters are implemented.
Signed-off-by: David Goulet <dgoulet@torproject.org>
And fix the unsupported protover example so it uses a Link protover much
higher than 5.
Part of #25070, bugfix on 0.3.3.1-alpha, which introduced the protover crate.
I'm leaving the getsockname code in transproxy alone, since it is
comparatively isolated, rather platform-specific, and hard to test.
Implements 18105.
Add two new files (crypto_rsa.c, crypto_rsa.h) as new module of crypto.[ch].
This new module includes all functions and dependencies related to RSA
operations. Those have been removed from crypto.[ch].
All new changes related to RSA operations must be done in these files.
Follows #24658
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
The upcoming DoS mitigation subsytem needs to keep information on a per-IP
basis which is also what the geoip clientmap does.
For another subsystem to access that clientmap, this commit adds a lookup
function that returns the entry. For this, the clientmap_entry_t had to be
moved to the header file.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We'd been using crypto_digest_dup() and crypto_digest_assign() here,
but they aren't necessary. Instead we can just use the stack to
store the previous state of the SHA_CTX and avoid a malloc/free pair.
Closes ticket 24914.
In order to make the OR and dir checking functions in router.c less confusing
we renamed some functions and splitted consider_testing_reachability() into
router_should_check_reachability() and router_do_reachability_checks(). Also we
improved the documentation.
Fixes#18918.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Previously, we wouldn't do this when running with a routerinfo_t in
some cases, leading to many needless calls to the protover module.
This change also cleans up the code in nodelist.c a bit.
Fixes bug 25008; bugfix on 0.2.9.4-alpha.
Without this patch, not only will TLS1.3 not work with Tor, but
OpenSSL 1.1.1 with TLS1.3 enabled won't build any connections at
all: It requires that either TLS1.3 be disabled, or some TLS1.3
ciphersuites be listed.
Closes ticket 24978.
As we're trying not to have all the other modules in Tor, we moved the openssl
namespace includes back into crypto.c and crypto_openssl_mgt.c files.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Included crypto_openssl_mgt.[ch] into the appropiate files in order to resolve
compiling and dependencies issues.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
Renamed free_openssl() to crypto_openssl_free_all(). Also we made variables and
functions static again.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
For 23847, we want Tor to be able to shut down and then restart in
the same process. Here's a patch to make the Tor binary do that.
To test it, you need to build with --enable-restart-debugging, and
then you need to set the environment variable TOR_DEBUG_RESTART.
With this option, Tor will then run for 5 seconds, then restart
itself in-process without exiting. This only happens once.
You can change the 5-second interval using
TOR_DEBUG_RESTART_AFTER_SECONDS.
Implements ticket 24583.
Fix an "off by 2" error in counting rendezvous failures on the onion
service side.
While we thought we would stop the rendezvous attempt after one failed
circuit, we were actually making three circuit attempts before giving up.
Fixes bug 24895; bugfix on 0.0.6.
Rename crypto_openssl.[ch] to crypto_openssl_mgt.[ch] because it is possible we
need crypto_openssl.[ch] in the future.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
Since helper_create_introduce1_cell() checks "cell" for nullness,
scan-build is concerned that test_introduce1_validation()
dereferences it without checking it. So, add a check.
Not backporting, since this is spurious, _and_ tests-only.
Fix a set of false positives where relays would consider connections
to other relays as being client-only connections (and thus e.g.
deserving different link padding schemes) if those relays fell out
of the consensus briefly.
Now we look only at the initial handshake and whether the connection
authenticated as a relay.
Fixes bug 24898; bugfix on 0.3.1.1-alpha.
New-style (v3) onion services now obey the "max rendezvous circuit
attempts" logic.
Previously they would make as many rendezvous circuit attempts as they
could fit in the MAX_REND_TIMEOUT second window before giving up.
Fixes bug 24894; bugfix on 0.3.2.1-alpha.
Define TOR_PRIuSZ as minGW compiler doesn't support zu format specifier for
size_t type.
Fixes#24861 on ac9eebd.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
... in get_interface_addresses_ioctl().
This pointer alignment issue exists on x86_64 macOS, but is unlikely to exist
elsewhere. (i386 macOS only requires 4-byte alignment, and other OSs have
8-byte ints.)
Fixes bug 24733; not in any released version of tor.
Add free_openssl() function to free the memory allocated for OpenSSL version
management variables. It is required since OpenSSL management has been isolated
from the crypto module.
Follows #24658.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
Add two new files (crypto_openssl.c, crypto_openssl.h) as new module of
crypto.[ch]. This new module includes all functions and dependencies related
to OpenSSL management. Those have been removed from crypto.[ch].
All new changes related to OpenSSL management must be done in these files.
Follows #24658
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
If we tried to move a descriptor from routerlist->old_routers
back into the current routerlist, we were preparing a buffer with
format_iso_time() on ri->cert_expiration_time, and doing it preemptively
since router_add_to_routerlist() might free ri so we wouldn't be able
to get at it later in the function.
But if the descriptor we're moving doesn't have any ed signature, then
its cert will be marked to expire at TIME_MAX, and handing TIME_MAX
to format_iso_time() generates this log warning:
correct_tm(): Bug: gmtime(9223372036854775807) failed with error Value too large for defined data type: Rounding down to 2037
The fix is to preemptively remember the expiry time, but only prepare
the buffer if we know we're going to need it.
Bugfix on commit a1b0a0b9, which came about as part of a fix for bug
20020, and which is not yet in any released version of Tor (hence no
changes file).
Using this script:
sed -i.bak $'s|^,$|/* ===== */\\\n,|' src/or/fallback_dirs.inc
(Due to embedded newlines, this script only works in bash.)
And manually add a delimiter to the end of the header, and the start of
the fallback list.
This allows us to check that the code compiles, and the unit tests pass.
And it allows downstream users stem and atlas to adapt to the new format.
The upcoming fallback rebuild will automatically generate this new format.
Follow-up to 24725.
Using this script:
sed -i.bak $'s|^,$|/* extrainfo=0 */\\\n,|' src/or/fallback_dirs.inc
(Due to embedded newlines, this script only works in bash.)
This allows us to check that the code compiles, and the unit tests pass.
And it allows downstream users stem and atlas to adapt to the new format.
The upcoming fallback rebuild will automatically generate this new format,
with actual relay extrainfo cache flags.
Follow-up to 22759.
Using this script:
sed -i.bak $'s|^,$|/* nickname= */\\\n,|' src/or/fallback_dirs.inc
(Due to embedded newlines, this script only works in bash.)
This allows us to check that the code compiles, and the unit tests pass.
And it allows downstream users stem and atlas to adapt to the new format.
The upcoming fallback rebuild will automatically generate this new format,
with actual relay nicknames.
Follow-up to 24600.
Using this script:
sed -i.bak 's/" weight=10",/,/' src/or/fallback_dirs.inc
This allows us to check that the code compiles, and the unit tests pass.
And it allows downstream users stem and atlas to adapt to the new format.
The upcoming fallback rebuild will automatically generate this new format.
Follow-up to 24679.
The code had been using c_char and i8 interchangeably, but it turns
out that c_char is only i8 on platforms where "char" is signed. On
other platforms, c_char is u8.
Fixes bug 24794; bug not on any released Tor.
These are all about local variables shadowing global
functions. That isn't normally a problem, but at least one
compiler we care about seems to treat this as a case of -Wshadow
violation, so let's fix it.
Fixes bug 24634; bugfix on 0.3.2.1-alpha.
Tor now sets IPv6 preferences on rewrite_node_address_for_bridge() even if
there is only ri or rs. It always warns about them.
Also Tor now sets the IPv6 address in rs as well as it sets the one in ri.
Fixes#24572 on 9e9edf7 in 0.2.4.5-alpha.
Fixes#24573 on c213f27 in 0.2.8.2-alpha.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
When the fascist_firewall_choose_address_ functions don't find a
reachable address, set the returned address to the null address and port.
This is a precautionary measure, because some callers do not check the
return value.
Fixes bug 24736; bugfix on 0.2.8.2-alpha.
This makes clients on the public tor network prefer to bootstrap off fallback
directory mirrors.
This is a follow-up to 24679, which removed weights from the default fallbacks.
Implements ticket 24681.
Using tt_assert in these helpers was implying to scan-build that our
'new' functions might be returning NULL, which in turn would make it
warn about null-pointer use.
We've been seeing problems with destroy cells queues taking up a
huge amount of RAM. We can mitigate this, since while a full packed
destroy cell takes 514 bytes, we only need 5 bytes to remember a
circuit ID and a reason.
Fixes bug 24666. Bugfix on 0.2.5.1-alpha, when destroy cell queues
were introduced.
With extra_space negative, it means that the "notsent" queue is quite large so
we must consider that value with the current computed tcp_space. If we end up
to have negative space, we should not add more data to the kernel since the
notsent queue is just too filled up.
Fixes#24665
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead of using INT_MAX as a write limit for KISTLite, use the lower layer
limit which is using the specialized num_cells_writeable() of the channel that
will down the line check the connection's outbuf and limit it to 32KB
(OR_CONN_HIGHWATER).
That way we don't take the chance of bloating the connection's outbuf and we
keep the cells in the circuit queue which our OOM handler can take care of,
not the outbuf.
Finally, this commit adds a log_debug() in the update socket information
function of KIST so we can get the socket information in debug.
Fixes#24671
Signed-off-by: David Goulet <dgoulet@torproject.org>
Exposing cell_queues_get_total_allocation(), buf_get_total_allocation(),
tor_compress_get_total_allocation(), tor_compress_get_total_allocation() when
hit MaxMemInQueues threshold.
Fixes#24501
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
This patch adds support for MainloopStats that allow developers to get
main event loop statistics via Tor's heartbeat status messages. The new
status log message will show how many succesful, erroneous, and idle
event loop iterations we have had.
See: https://bugs.torproject.org/24605
Adding tor_remove_file(filename) and refactoring tor_cleanup().
Removing CookieAuthFile and ExtORPortCookieAuthFile when tor_cleanup() is
called.
Fixes#23271.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
Using absolute_msec requires a 64-bit division operation every time
we calculate it, which gets expensive on 32-bit architectures.
Instead, just use the lazy "monotime_coarse_get()" operation, and
don't convert to milliseconds until we absolutely must.
In this case, it seemed fine to use a full monotime_coarse_t rather
than a truncated "stamp" as we did to solve this problem for the
timerstamps in buf_t and packed_cell_t: There are vastly more cells
and buffer chunks than there are channels, and using 16 bytes per
channel in the worst case is not a big deal.
There are still more millisecond operations here than strictly
necessary; let's see any divisions show up in profiles.
Retry directory downloads when we get our first bridge descriptor
during bootstrap or while reconnecting to the network. Keep retrying
every time we get a bridge descriptor, until we have a reachable bridge.
Stop delaying bridge descriptor fetches when we have cached bridge
descriptors. Instead, only delay bridge descriptor fetches when we
have at least one reachable bridge.
Fixes bug 24367; bugfix on 0.2.0.3-alpha.
When entry_list_is_constrained() is true, guards_retry_optimistic()
always returns true.
When entry_list_is_constrained() is false,
options->UseBridges is always false,
therefore !options->UseBridges is always true,
therefore (!options->UseBridges || ...) is always true.
Cleanup after #24367.
Commit e80893e51b made tor call
hs_service_intro_circ_has_closed() when we mark for close a circuit.
When we cleanup intro points, we iterate over the descriptor's map of intro
points and we can possibly mark for close a circuit. This was problematic
because we would MAP_DEL_CURRENT() the intro point then free it and finally
mark for close the circuit which would lookup the intro point that we just
free in the map we are iterating over.
This can't be done and leads to a use-after-free because the intro point will
be returned successfully due to the fact that we are still in the loop
iterating. In other words, MAP_DEL_CURRENT() followed by a digest256map_get()
of the same object should never be done in the same loop.
Fixes#24595
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch lifts the check for whether a given log file (`logfile_t`) is
an "external logfile" (handled by an external logging system such as
syslog, android's logging subsystem, or as an external C callback
function) into a function on its own.
See: https://bugs.torproject.org/24362
In KIST, we could have a small congestion window value than the unacked
packets leading to a integer overflow which leaves the tcp_space value to be
humongous.
This has no security implications but it results in KIST scheduler allowing to
send cells on a potentially saturated connection.
Found by #24423. Fixes#24590.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This function leaks memory when the event_base is freed before the
event itself fires. That's not harmful, but it's annoying when
trying to debug other memory leaks.
Fixes bug 24584; bugfix on 0.2.8.1-alpha.
When we didn't do this before, we'd have some still-reachable memory
warnings, and we'd find ourselves crashing when we tried to
reinitialize libevent.
Part of 24581 (don't crash when restarting Tor in-process)
This patch adds support for Android's logging subsystem in Tor. When
debugging Android applications it is useful to be able to collect
information about the application running on the platform via the
various system services that is available on the platform.
This patch allows you to add "Log notice android" to your torrc and have
Tor send everything above and including the notice severity to Android's
ring buffer which can be inspected using the 'adb logcat' program.
See: https://bugs.torproject.org/24362
This patch ensures that we more easily can extend our log backends that
does not take any additional argument other than a single keyword. This
patch is mostly reindentation of some code which is why it is split out
into its own patch.
See: https://bugs.torproject.org/24362
Also make IPv6-only clients wait for microdescs for relays, even if we were
previously using descriptors (or were using them as a bridge) and have
a cached descriptor for them.
But if node_is_a_configured_bridge(), stop waiting for its IPv6 address in
a microdescriptor, because we'll never use it.
Implements #23827.
networkstatus_consensus_has_ipv6() tells us whether the consensus method of
our current consensus supports IPv6 ORPorts in the consensus.
Part of #23827.
This commit was made mechanically by this perl script:
\#!/usr/bin/perl -w -i -p
next if /^#define FREE_AND_NULL/;
s/\bFREE_AND_NULL\((\w+),/FREE_AND_NULL\(${1}_t, ${1}_free_,/;
s/\bFREE_AND_NULL_UNMATCHED\(/FREE_AND_NULL\(/;
This commit removes the old FREE_AND_NULL, and renames the old
FREE_AND_NULL_UNMATCHED so that it is now called FREE_AND_NULL.
This will break all the FREE_AND_NULL_* users; the next commit will
fix them.
Couple things happen in this commit. First, we do not re-queue a cell back in
the circuit queue if the write packed cell failed. Currently, it is close to
impossible to have it failed but just in case, the channel is mark as closed
and we move on.
The second thing is that the channel_write_packed_cell() always took ownership
of the cell whatever the outcome. This means, on success or failure, it needs
to free it.
It turns out that that we were using the wrong free function in one case and
not freeing it in an other possible code path. So, this commit makes sure we
only free it in one place that is at the very end of
channel_write_packed_cell() which is the top layer of the channel abstraction.
This makes also channel_tls_write_packed_cell_method() return a negative value
on error.
Two unit tests had to be fixed (quite trivial) due to a double free of the
packed cell in the test since now we do free it in all cases correctly.
Part of #23709
Signed-off-by: David Goulet <dgoulet@torproject.org>
Split hs_circuitmap_get_rend_circ_client_side(). One returns only established
circuits (hs_circuitmap_get_established_rend_circ_client_side()) and the other
returns all kinds of circuits.
Fixes#23459
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
Previously, circuit_stream_is_being_handled incorrectly reported
that (1) an exit port was "handled" by a circuit regardless of
whether the circuit was already isolated in some way, and
(2) that a stream could be "handled" by a circuit even if their
isolation settings were incompatible.
As a result of (1), in Tor Browser, circuit_get_unhandled_ports was
reporting that all ports were handled even though all non-internal
circuits had already been isolated by a SOCKS username+password.
Therefore, circuit_predict_and_launch_new was declining to launch
new exit circuits. Then, when the user visited a new site in Tor
Browser, a stream with new SOCKS credentials would be initiated,
and the stream would have to wait while a new circuit with those
credentials could be built. That wait was making the
time-to-first-byte longer than it needed to be.
Now, clean, not-yet-isolated circuit(s) will be automatically
launched ahead of time and be ready for use whenever a new stream
with new SOCKS credentials (or other isolation criteria) is
initiated.
Fixes bug 18859. Thanks to Nick Mathewson for improvements.
This makes sure that a non opened channel is never put back in the channel
pending list and that its state is consistent with what we expect that is
IDLE.
Test the fixes in #24502.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch adds a check for the return value of `hs_parse_address()` in
`hs_control_hspost_command()`. Since it should not be possible for
`hs_parse_address()` to fail in this context we wrap the error check
with the `BUG()` macro.
See: https://bugs.torproject.org/24543
This patch is a result of auditing all of our uses of
get_datadir_fname() and its kin, and dividing them into cache vs
keys vs other data.
The new get_keydir_fname() and get_cachedir_fname() functions don't
actually do anything new yet.
This introduces the test_hs_control.c file which at this commit contains basic
unit test for the HS_DESC event.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is removed for two reasons. First, HSDir accepts descriptor even though
they don't think they are in fact an HSDir. This is to avoid consensus desync
between client/service and directories.
Second, our malicious HSDir scanner uses the HSPOST command to post on all
relays in order to test them before they could become HSDir. We had to remove
that check from the tor code that the scanner uses.
Thus, this check should not be enforced by the control port for the above use
cases. It is also a bit more complex with v3 support for which not all HSDir
support it so basically irrelevant check.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is groundwork for the HSPOST control port command that needs a way in the
HS subsystem to upload a service descriptor to a specific HSDir.
To do so, we add a public function that takes a series of parameters including
a fully encoded descriptor and initiate a directory request to a specific
routerstatut_t object.
It is for now not used but should be, in future commit, by the HSPOST command.
This commit has no behavior change, only refactoring.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This makes the REPLICA= field optional for the control port event. A v2
service will always pass it and v3 is ignored.
Signed-off-by: David Goulet <dgoulet@torproject.org>
A new v3 specific function has been added named
control_event_hsv3_descriptor_failed().
The HS v3 subsystem now uses it.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This changes the control_event_hs_descriptor_requested() call to add the hsdir
index optional value. v2 passes NULL all the time.
This commit creates hs_control.{c|h} that contains wrappers for the HS
subsystem to interact with the control port subsystem.
The descriptor REQUESTED event is implemented following proposal 284 extension
for v3.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Make control_event_hs_descriptor_received() and
control_event_hs_descriptor_failed() v2 specific because they take a
rend_data_t object and v3 will need to pass a different object.
No behavior change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, rename and make that function static because it is internal to
control.c and called by two HS_DESC events.
Second, make it take more basic parameters and thus not a rend_data_t object
so we can still use the function for v3 HS that doesn't use that object.
Third, move the descriptor ID lookup to the two specific events (yes little
code duplication there) because they get a rend_data_t object which won't be
the case for v3.
Finally, through this refactoring, change the pointer check to BUG() and
change some parameter names to reflect what they really are.
No behavior change at this commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is a naming refactor mostly _except_ for a the events' function that take
a rend_data_t which will require much more refactoring.
No behavior change at this commit, cleanup and renaming stuff to not be only
v2 specific.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When an intro circuit has closed, do not warn anymore when we can't find the
service. It is possible to hit that condition if the service is removed before
the circuits were fully closed. This happens in the case of deleting an
ephemeral service.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The functions are now used by the ADD_ONION/DEL_ONION control port command as
well. This commits makes them fully functionnal with hidden service v3.
Part of #20699
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead of using the cwd to specify the location of Cargo.toml, we
use the --manifest-path option to specify its location explicitly.
This works around the bug that isis diagnosed on our jenkins builds.
Making errno error log more useful for getrandom() call. Adding if statement to
make difference between ENOSYS and other errors.
Fixes#24500
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
First, hs_service_intro_circ_has_closed() is now called in circuit_mark_for
close() because the HS subsystem needs to learn when an intro point is
actually not established anymore as soon as possible. There is a time window
between a close and a free.
Second, when we mark for close, we also remove it from the circuitmap because
between the close and the free, a service can launch an new circuit to that
same intro point and thus register it which only succeeds if the intro point
authentication key is not already in the map.
However, we still do a remove from the circuitmap in circuit_free() in order
to also cleanup the circuit if it wasn't marked for close prior to the free.
Fixes#23603
Signed-off-by: David Goulet <dgoulet@torproject.org>
The hs_service_intro_circ_has_closed() was removing intro point objects if too
many retries.
We shouldn't cleanup those objects in that function at all but rather let
cleanup_intro_points() do its job and clean it properly.
This was causing an issue in #23603.
Furthermore, this moves the logic of remembering failing intro points in the
cleanup_intro_points() function which should really be the only function to
know when to cleanup and thus when an introduction point should be remembered
as a failed one.
Fixes#23603
Signed-off-by: David Goulet <dgoulet@torproject.org>
In the KIST main loop, if the channel happens to be not opened, set its state
to IDLE so we can release it properly later on. Prior to this fix, the channel
was in PENDING state, removed from the channel pending list and then kept in
that state because it is not opened.
This bug was introduced in commit dcabf801e5 for
which we made the scheduler loop not consider unopened channel.
This has no consequences on tor except for an annoying but harmless BUG()
warning.
Fixes#24502
Signed-off-by: David Goulet <dgoulet@torproject.org>
Some platforms don't have good monotonic time support so don't warn when the
diff between the last run of the scheduler time and now is negative. The
scheduler recovers properly from this so no need to be noisy.
Fixes#23696
Signed-off-by: David Goulet <dgoulet@torproject.org>
When creating a routerstatus (vote) from a routerinfo (descriptor),
set the IPv6 address to the unspecified IPv6 address, and explicitly
initialise the port to zero.
Also clarify the documentation for the function.
Fixes bug 24488; bugfix on 0.2.4.1-alpha.
Fortunately, use_cached_ipv4_answers was already 0, so we wouldn't
actually use this info, but it's best not to have it.
Fixes bug 24050; bugfix on 0.2.6.3-alpha
TROVE-2017-12. Severity: Medium
When choosing a random node for a circuit, directly use our router
descriptor to exclude ourself instead of the one in the global
descriptor list. That list could be empty because tor could be
downloading them which could lead to not excluding ourself.
Closes#21534
TROVE-2017-12. Severity: Medium
Thankfully, tor will close any circuits that we try to extend to
ourselves so this is not problematic but annoying.
Part of #21534.
TROVE-2017-13. Severity: High.
In the unlikely case that a hidden service could be missing intro circuit(s),
that it didn't have enough directory information to open new circuits and that
an intro point was about to expire, a use-after-free is possible because of
the intro point object being both in the retry list and expiring list at the
same time.
The intro object would get freed after the circuit failed to open and then
access a second time when cleaned up from the expiring list.
Fixes#24313
Going from 4 hours to 24 hours in order to try reduce the efficiency of guard
discovery attacks.
Closes#23856
Signed-off-by: David Goulet <dgoulet@torproject.org>
The goal here is to replace our use of msec-based timestamps with
something less precise, but easier to calculate. We're doing this
because calculating lots of msec-based timestamps requires lots of
64/32 division operations, which can be inefficient on 32-bit
platforms.
We make sure that these stamps can be calculated using only the
coarse monotonic timer and 32-bit bitwise operations.
First, that test was broken from the previous commit because the
channel_queue_cell() has been removed. This now tests the
channel_process_cell() directly.
Second, it wasn't testing much except if the channel subsystem actually went
through the cell handler. This commit adds more checks on the state of a
channel going from open, receiving a cell and closing.
Third, this and the id_map unit test are working, not the others so they've
been marked as not working and future commit will improve and fix those.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This removed code that was either never reached or irrelevant after the
incoming/outgoing queue removal such as the "timestamp_drained".
Lots of things are also removed from channel.h that do not exists anymore or
not used.
Signed-off-by: David Goulet <dgoulet@torproject.org>
If the channel layer failed to write a cell from the circuit queue, requeue it
so it can be retried on the same channel later.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The channel_write_cell() and channel_write_var_cell() can't be possibly called
nor are used by tor. We only write on the connection outbuf packed cell coming
from the scheduler that takes them from the circuit queue.
This makes channel_write_packed_cell() the only usable function. It is
simplify and now returns a code value. The reason for this is that in the next
commit(s), we'll re-queue the cell onto the circuit queue if the write fails.
Finally, channel unit tests are being removed with this commit because they do
not match the new semantic. They will be re-written in future commits.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The channel subsystem was doing a whole lot to track and try to predict the
channel queue size but they are gone due to previous commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
For the rationale, see ticket #23709.
This is a pretty massive commit. Those queues were everywhere in channel.c and
it turns out that it was used by lots of dead code.
The channel subsystem *never* handles variable size cell (var_cell_t) or
unpacked cells (cell_t). The variable ones are only handled in channeltls and
outbound cells are always packed from the circuit queue so this commit removes
code related to variable and unpacked cells.
However, inbound cells are unpacked (cell_t), that is untouched and is handled
via channel_process_cell() function.
In order to make the commit compile, test have been modified but not passing
at this commit. Also, many tests have been removed but better improved ones
get added in future commits.
This commit also adds a XXX: which indicates that the handling process of
outbound cells isn't fully working. This as well is fixed in a future commit.
Finally, at this commit, more dead code remains, it will be cleanup in future
commits.
Fixes#23709
Signed-off-by: David Goulet <dgoulet@torproject.org>
This function is part of the tor fast path so this commit adds more
documentation to it as it is critical.
Signed-off-by: David Goulet <dgoulet@torproject.org>
append_cell_to_circuit_queue() had code disabled from commit
2a95f31716
This code is 4+ years old related to bug #9072 so if we ever want to revisit
it, lets inspect/revert this commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This applies the changes in 23524 to num_usable_bridges(), because it has
replaced any_bridge_descriptors_known().
The original changes file still applies.
Stop checking for bridge descriptors when we actually want to know if
any bridges are usable. This avoids potential bootstrapping issues.
Fixes bug 24367; bugfix on 0.2.0.3-alpha.
Stop stalling when bridges are changed at runtime. Stop stalling when
old bridge descriptors are cached, but they are not in use.
Fixes bug 24367; bugfix on 23347 in 0.3.2.1-alpha.
We used to check whether we have enough filtered guards (guard set when
torrc is applied) but that's not good enough, since that might be bad in
some cases where many guards are not reachable (might cause overblocking
and hence reacahbility issues).
We now check if we have enough reachable filtered guards before applying
md restrictions which should prevent overblocking.
Previously, if store_multiple() reported a partial success, we would
store all the handles it gave us as if they had succeeded. But it's
possible for the diff to be only partially successful -- for
example, if LZMA failed but the other compressors succeeded.
Fixes bug 24086; bugfix on 0.3.1.1-alpha.
Move it to hs_common.h and rename it "hs_service_add_ephemeral_status_t". It
will be shared between v2 and v3 services.
Part of #20699
Signed-off-by: David Goulet <dgoulet@torproject.org>
At this commit, the key handling and generation is supported for a v3 service
(ED25519-V3). However, the service creation is not yet implemented. This only
adds the interface and code to deal with the new ED25519-V3 key type.
Tests have been updated for RSA key type but nothing yet for ED25519-v3.
Part of #20699
Signed-off-by: David Goulet <dgoulet@torproject.org>
This will be used by the control port command "GETINFO
hs/service/desc/id/<ADDR>" which returns the encoded current descriptor for
the given onion address.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit adds hs_cache_lookup_encoded_as_client() function that returns the
encoded descriptor for a given service public key. This will be needed by the
"GETINFO hs/client/desc/id/<ADDR>" control port command.
Signed-off-by: David Goulet <dgoulet@torproject.org>
If we can't read a file because of an FS issue, we say "we can't
read that" and move on. But if we can't read it because it's empty,
because it has no labels, or because its labels are misformatted, we
should remove it.
Fixes bug 24099; bugfix on 0.3.1.1-alpha.
A circuit with purpose C_INTRODUCING means that its state is opened but the
INTRODUCE1 cell hasn't been sent yet. We shouldn't consider that circuit when
looking for timing out "building circuit". We have to wait on the rendezvous
circuit to be opened before sending that cell so the intro circuit needs to be
kept alive for at least that period of time.
This patch makes that the purpose C_INTRODUCING is ignored in the
circuit_expire_building() which means that we let the circuit idle timeout
take care of it if we end up never using it.
Fixes#23681
Signed-off-by: David Goulet <dgoulet@torproject.org>
This check makes it so we can reach "done" without setting "conn",
and so the "if (conn)" check will not be redundant, and so coverity
won't complain. Fixes CID 1422205. Not actually a bug.
There are three changes here:
* We need to allow epoll_pwait.
* We need to allow PF_NETLINK sockets to be opened with SOCK_CLOEXEC.
* We need to use openat() instead of open().
Note that this fix is not complete, since the openat() change is
turned off. The next commit will make the openat() change happen
when we're running glibc 2.26 or later.
Fix for 24315.
We don't want to allow general signals to be sent, but there's no
problem sending a kill(0) to probe whether a process is there.
Fixes bug 24198; bugfix on 0.2.5.1-alpha when the seccomp2 sandbox
was introduced.
When we close a connection via connection_close_immediately, we kill
its events immediately. But if it had been blocked on bandwidth
read/write, we could try to re-add its (nonexistent) events later
from connection_bucket_refill -- if we got to that callback before
we swept the marked connections.
Fixes bug 24167. Fortunately, this hasn't been a crash bug since we
introduced connection_check_event in 0.2.9.10, and backported it.
This is a bugfix on commit 89d422914a, I believe, which
appeared in Tor 0.1.0.1-rc.
Commit 56c5e282a7 suppressed that same log
statement in directory_info_has_arrived() for microdescriptors so do the same
for the descriptors. As the commit says, we already have the bootstrap
progress for this.
Fixes#23861
Signed-off-by: David Goulet <dgoulet@torproject.org>
evdns is allowed to give us unrecognized object types; it is allowed
to give us non-IPv4 answer types, and it is (even) allowed to give
us empty answers without an error.
Closes ticket 24097.
By convention, the torrc options that the user sets are
unchangeable. If we need to change them, we should be using a copy
that's stored in another field
To avoid trouble, I'm keeping DataDirectory as the name for the
field that the rest of Tor uses, and using DataDirectory_option for
the confparse-controlled field.
This commit also modernizes some older string handling code in the
DataDirectory normalization function.
Due to #23662 this can happen under natural causes and does not disturb
the functionality of the service. This is a simple 0.3.2 fix for now,
and we plan to fix this properly in 0.3.3.
Clients add rendezvous point IPv6 addresses to introduce cell link specifiers,
when the node has a valid IPv6 address.
Also check the node's IPv4 address is valid before adding any link specifiers.
Implements #23577.
This function -- a mock replacement used only for fuzzing -- would
have a buffer overflow if it got an RSA key whose modulus was under
20 bytes long.
Fortunately, Tor itself does not appear to have a bug here.
Fixes bug 24247; bugfix on 0.3.0.3-alpha when fuzzing was
introduced. Found by OSS-Fuzz; this is OSS-Fuzz issue 4177.
On failure to upload, the HS_DESC event would report "UPLOAD_FAILED" as the
Action but it should have reported "FAILED" according to the spec.
Fixes#24230
Signed-off-by: David Goulet <dgoulet@torproject.org>
DisableNetwork is a subset of net_is_disabled(), which is (now) a
subset of should_delay_dir_fetches().
Some of these changes are redundant with others higher or lower in
the call stack. The ones that I think are behavior-relevant are
listed in the changes file. I've also added comments in a few
places where the behavior is subtle.
Fixes bug 12062; bugfix on various versions.
Commit e67f4441eb introduced a safeguard against
using an uninitialized voting schedule object. However, the dirvote_act() code
was looking roughly at the same thing to know if it had to compute the timings
before voting with this condition:
if (!voting_schedule.voting_starts) {
...
dirvote_recalculate_timing(options, now);
}
The sr_init() function is called very early and goes through the safeguard
thus the voting schedule is always initilized before the first vote.
That first vote is a crucial one because we need to have our voting schedule
aligned to the "now" time we are about to use for voting. Then, the schedule
is updated when we publish our consensus or/and when we set a new consensus.
From that point on, we only want to update the voting schedule through that
code flow.
This "created_on_demand" is indicating that the timings have been recalculated
on demand by another subsystem so if it is flagged, we know that we need to
ignore its values before voting.
Fixes#24186
Signed-off-by: David Goulet <dgoulet@torproject.org>
When we have fewer than 15 descriptors to fetch, we will delay the
fetch for a little while. That's fine, if we can go ahead and build
circuits... but if not, it's a poor choice indeed.
Fixes bug 23985; bugfix on 0.1.1.11-alpha.
In 0.3.0.3-alpha, when we made primary guard descriptors necessary
for circuit building, this situation got worse.
When calculating the fraction of nodes that have descriptors, and all
all nodes in the network have zero bandwidths, count the number of nodes
instead.
Fixes bug 23318; bugfix on 0.2.4.10-alpha.
Back in 0.2.4.3-alpha (e106812a77), when we switched from using
double to using uint64 for selecting by bandwidth, I got the math
wrong: I should have used llround(x), or (uint64_t)(x+0.5), but
instead I wrote llround(x+0.5). That means we would always round
up, rather than rounding to the closest integer
Fixes bug 23318; bugfix on 0.2.4.3-alpha.
The flush cells process can close a channel if the connection write fails but
still return that it flushed at least one cell. This is due because the error
is not propagated up the call stack so there is no way of knowing if the flush
actually was successful or not.
Because this would require an important refactoring touching multiple
subsystems, this patch is a bandaid to avoid the KIST scheduler to handle
closed channel in its loop.
Bandaid on #23751.
Signed-off-by: David Goulet <dgoulet@torproject.org>
dirvote_get_next_valid_after_time() is the only public function that uses the
voting schedule outside of the dirvote subsystem so if it is zeroed,
recalculate its timing if we can that is if a consensus exists.
Part of #24161
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because the HS and SR subsystems can use the voting schedule early (with the
changes in #23623 making the SR subsystem using the static voting schedule
object), we need to recalculate the schedule very early when setting the new
consensus.
Fixes#24161
Signed-off-by: David Goulet <dgoulet@torproject.org>
If it decrypts something that turns out to start with a NUL byte,
then decrypt_desc_layer() will return 0 to indicate the length of
its result. But 0 also indicates an error, which causes the result
not to be freed by decrypt_desc_layer()'s callers.
Since we're trying to stabilize 0.3.2.x, I've opted for the simpler
possible fix here and made it so that an empty decrypted string will
also count as an error.
Fixes bug 24150 and OSS-Fuzz issue 3994.
The original bug was present but unreachable in 0.3.1.1-alpha. I'm
calling this a bugfix on 0.3.2.1-alpha since that's the first version
where you could actually try to decrypt these descriptors.
The node_get_ed25519_id() warning can actually be triggered by a relay flagged
with NoEdConsensus so instead of triggering a warning on all relays of the
network, downgrade it to protocol warning.
Fixes#24025
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a BUG() occurs, this macro will print extra information about the state
of the scheduler and the given channel if any. This will help us greatly to
fix future bugs in the scheduler especially when they occur rarely.
Fixes#23753
Signed-off-by: David Goulet <dgoulet@torproject.org>
When running "make test-network-all", test that IPv6-only clients can use
microdescriptors. IPv6-only microdescriptor client support was fixed in
tor 0.3.0.1-alpha.
Requires chutney master 61c28b9 or later.
Closes ticket 24109.
They are not yet implemented: they will upload descriptors, but won't be
able to rendezvous, because IPv6 addresses in link specifiers are ignored.
Part of #23820.
The previous version of this function had the following issues:
* it didn't check if the extend_info contained an IPv6 address,
* it didn't check if the ed25519 identity key was valid.
But we can't add IPv6 support in a bugfix release.
Instead, BUG() if the address is an IPv6 address, so we always put IPv4
addresses in link specifiers. And ignore missing ed25519 identifiers,
rather than generating an all-zero link specifier.
This supports v3 hidden services on IPv4, dual-stack, and IPv6, and
v3 single onion services on IPv4 only.
Part of 23820, bugfix on 0.3.2.1-alpha.
When the directory information changes, callback to the HS client subsystem so
it can check if any pending SOCKS connections are waiting for a descriptor. If
yes, attempt a refetch for those.
Fixes#23762
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because the HS subsystem needs the voting schedule to compute time period, we
need all tor type to do that.
Part of #23623
Signed-off-by: David Goulet <dgoulet@torproject.org>
The new decryption function performs no decryption, skips the salt,
and doesn't check the mac. This allows us to fuzz the
hs_descriptor.c code using unencrypted descriptor test, and exercise
more of the code.
Related to 21509.
The exposed get_voting_schedule() allocates and return a new object everytime
it is called leading to an awful lot of memory allocation when getting the
start time of the current round which is done for each node in the consensus.
Closes#23623
Signed-off-by: David Goulet <dgoulet@torproject.org>
If the intro point supports ed25519 link authentication, make sure we don't
have a zeroed key which would lead to a failure to extend to it.
We already check for an empty key if the intro point does not support it so
this makes the check on the key more consistent and symmetric.
Fixes#24002
Signed-off-by: David Goulet <dgoulet@torproject.org>
The previous version of these functions had the following issues:
* they can't supply both the IPv4 and IPv6 addresses in link specifiers,
* they try to fall back to a 3-hop path when the address for a direct
connection is unreachable, but this isn't supported by
launch_rendezvous_point_circuit(), so it fails.
But we can't fix these things in a bugfix release.
Instead, always put IPv4 addresses in link specifiers.
And if a v3 single onion service can't reach any intro points, fail.
This supports v3 hidden services on IPv4, dual-stack, and IPv6, and
v3 single onion services on IPv4 only.
Part of 23820, bugfix on 0.3.2.1-alpha.
The previous version of this function has the following issues:
* it doesn't choose between IPv4 and IPv6 addresses correctly, and
* it doesn't fall back to a 3-hop path when the address for a direct
connection is unreachable.
But we can't fix these things in a bugfix release.
Instead, treat IPv6 addresses like any other unrecognised link specifier
and ignore them. If there is no IPv4 address, return NULL.
This supports v3 hidden services on IPv4, dual-stack, and IPv6, and
v3 single onion services on IPv4 only.
Part of 23820, bugfix on 0.3.2.1-alpha.
Turns out that when reloading a tor configured with hidden service(s), we
weren't copying all the needed information between the old service object to
the new one.
For instance, the desc_is_dirty timestamp wasn't which could lead to the
service uploading its desriptor much later than it would need to.
The replaycache wasn't also moved over and some intro point information as
well.
Fixes#23790
Signed-off-by: David Goulet <dgoulet@torproject.org>
Bridge relays can use it to add a "bridge-distribution-request" line
to their bridge descriptor, which tells BridgeDB how they'd like their
bridge address to be given out.
Implements tickets 18329.
Fixes bug 23908; bugfix on 0.3.1.6-rc when we made the keypin
failure message really long.
Backport from 0.3.2's 771fb7e7ba,
where arma said "get rid of the scary 256-byte-buf landmine".
It _should_ work, and I don't see a reason that it wouldn't, but
just in case, add a 10 second timer to make tor die with an
assertion failure if it's supposed to exit but it doesn't.
This function was never about 'finishing' the event loop, but rather
about making sure that the code outside the event loop would be run
at least once.
Sometimes when we call exit(), it's because the process is
completely hopeless: openssl has a broken AES-CTR implementation, or
the clock is in the 1960s, or something like that.
But sometimes, we should return cleanly from tor_main() instead, so
that embedders can keep embedding us and start another Tor process.
I've gone through all the exit() and _exit() calls to annotate them
with "exit ok" or "XXXX bad exit" -- the next step will be to fix
the bad exit()s.
First step towards 23848.
At first, we put the tor_git_revision constant in tor_main.c, so
that we wouldn't have to recompile config.o every time the git
revision changed. But putting it there had unintended side effect
of forcing every program that wanted to link libor.a (including
test, test-slow, the fuzzers, the benchmarks, etc) to declare their
own tor_git_revision instance.
That's not very nice, especially since we want to start supporting
others who want to link against Tor (see 23846).
So, create a new git_revision.c file that only contains this
constant, and remove the duplicated boilerplate from everywhere
else.
Part of implementing ticket 23845.
This feature should help programs that want to launch and manage a
Tor process, as well as programs that want to launch and manage a
Tor instance in a separate thread. Right now, they have to open a
controlport, and then connect to it, with attendant authentication
issues. This feature allows them to just start with an
authenticated connection.
Bug 23900.
Our socket accounting functions assumed that we'd never be asked to
close a socket that we didn't open ourselves. But now we want to
support taking control sockets that we inherit -- so we need a way
of taking ownership of them, so we don't freak out later on when we
close them.
Create a function that tells us if we can fetch or not the descriptor for the
given service key.
No behavior change. Mostly moving code but with a slight change so the
function can properly work by returning a boolean and also a possible fetch
status code.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Skip test_config_include_no_permission() when running as root, because
it will get an unexpected success from config_get_lines_include().
This affects some continuous integration setups. Fixes bug 23758.
When we added HTTPTunnelPort, the answer that we give when you try
to use your SOCKSPort as an HTTP proxy became wrong. Now we explain
that Tor sorta _is_ an HTTP proxy, but a SOCKSPort isn't.
I have left the status line the same, in case anything is depending
on it. I have removed the extra padding for Internet Explorer,
since the message is well over 512 bytes without it.
Fixes bug 23678; bugfix on 0.3.2.1-alpha.
Without this fix, changes from client to bridge don't trigger
transition_affects_workers(), so we would never have actually
initialized the cpuworkers.
Fixes bug 23693. Bugfix on 3bcdb26267 0.2.6.3-alpha, which
fixed bug 14901 in the general case, but not on the case where
public_server_mode() did not change.
Because our monotonic time interface doesn't play well with value set to 0,
always initialize to now() the scheduler_last_run at init() of the KIST
scheduler.
Fixes#23696
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a channel is scheduled and flush cells returns 0 that is no cells to
flush, we flag it back in waiting for cells so it doesn't get stuck in a
possible infinite loop.
It has been observed on moria1 where a closed channel end up in the scheduler
where the flush process returned 0 cells but it was ultimately kept in the
scheduling loop forever. We suspect that this is due to a more deeper problem
in tor where the channel_more_to_flush() is actually looking at the wrong
queue and was returning 1 for an empty channel thus putting the channel in the
"Case 4" of the scheduler which is to go back in pending state thus
re-considered at the next iteration.
This is a fix that allows the KIST scheduler to recover properly from a not
entirelly diagnosed problem in tor.
Fixes#23676
Signed-off-by: David Goulet <dgoulet@torproject.org>
When we added single_conn_free_bytes(), we cleared the outbuf on a
connection without setting outbuf_flushlen() to 0. This could cause
an assertion failure later on in flush_buf().
Fixes bug 23690; bugfix on 0.2.6.1-alpha.
This caused a BUG log when we noticed that the circuit had no
channel. The likeliest culprit for exposing that behavior is
d769cab3e5, where we made circuit_mark_for_close() NULL out
the n_chan and p_chan fields of the circuit.
Fixes bug 8185; bugfix on 0.2.5.4-alpha, I think.
My current theory is that this is just a marked circuit that hasn't
closed yet, but let's gather more information in case that theory is
wrong.
Diagnostic for 8185.
This patch ensures that we return TOR_COMPRESS_BUFFER_FULL in case we
have a input bytes left to process, but are out of output buffer or in
case we need to finish where the compression implementation might need
to write an epilogue.
See: https://bugs.torproject.org/23551
This patch ensures that we return TOR_COMPRESS_BUFFER_FULL in case we
have a input bytes left to process, but are out of output buffer or in
case we need to finish where the compression implementation might need
to write an epilogue.
See: https://bugs.torproject.org/23551
If 6 SOCKS requests are opened at once, it would have triggered 6 fetches
which ultimately poke all 6 HSDir. We don't want that, if we have multiple
SOCKS requests for the same service, do one fetch only.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When purging last HSDir requests, we used time(NULL) for computing the
service blinded key but in all other places in our codebase we actually
use the consensus times. That can cause wrong behavior if the consensus
is in a different time period than time(NULL).
This commit is required for proper purging of HSDir requests.
The confparse field has type UINT, which corresponds to an int
type. We had uint32_t.
This shouldn't cause trouble in practice, since int happens to
4-bytes wide on every platform where an authority is running. It's
still wrong, though.
These should have been int, but we had listed them as unsigned.
That's an easy mistake to make, since "int" corresponds with either
INT or UINT in the configuration file.
This bug cannot have actually caused a problem in practice, since we
check those fields' values on load, and ensure that they are in
range 0..INT32_MAX.
New approach, suggested by Taylor: During testing builds, we
initialize a union member of an appropriate pointer type with the
address of the member field we're trying to test, so we can make
sure that the compiler doesn't warn.
My earlier approach invoked undefined behavior.
Also demote a log message that can occur under natural causes
(if the circuit subsystem is missing descriptors/consensus etc.).
The HS subsystem will naturally retry to connect to intro points,
so no need to make that log user-facing.
So we can track them more easily in the logs and match any open/close/free
with those identifiers.
Part of #23645
Signed-off-by: David Goulet <dgoulet@torproject.org>
This removes the "nickname" of the cannibalized circuit last hop as it is
useless. It now logs the n_circ_id and global identifier so we can match it
with other logging statement.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Prior to the log statement, the circuit n_circ_id value is zeroed so keep a
copy so we can log it at the end.
Part of #23645
Signed-off-by: David Goulet <dgoulet@torproject.org>
Make the "Exit" flag assignment only depend on whether the exit
policy allows connections to ports 80 and 443. Previously relays
would get the Exit flag if they allowed connections to one of
these ports and also port 6667.
Resolves ticket 23637.
Back in 0.2.4.3-alpha (e106812a77), when we switched from using
double to using uint64 for selecting by bandwidth, I got the math
wrong: I should have used llround(x), or (uint64_t)(x+0.5), but
instead I wrote llround(x+0.5). That means we would always round
up, rather than rounding to the closest integer
Fixes bug 23318; bugfix on 0.2.4.3-alpha.
The is_first_hop field should have been called used_create_fast,
but everywhere that we wanted to check it, we should have been
checking channel_is_client() instead.
The diff is confusing, but were two static scheduler functions that
needed moving to static comment block.
No code change. Thanks dgoulet for original commit
The clock_skew_warning() refactoring allowed calls from
or_state_load() to control_event_bootstrap_problem() to occur prior
bootstrap phase 0, causing an assertion failure. Initialize the
bootstrap status prior to calling clock_skew_warning() from
or_state_load().
or_state_load() was using an incorrect sign convention when calling
clock_skew_warning() to warn about state file clock skew. This caused
the wording of the warning to be incorrect about the direction of the
skew.
is_canonical doesn't mean "am I connected to the one true address of
this relay"; it means "does this relay tell me that the address I'm
connected to belong to it." The point is to prevent TCP-based MITM,
not to prevent the relay from multi-homing.
Related to 22890.
Authority IPv6 addresses were originally added in 0.2.8.1-alpha.
This leaves 3/8 directory authorities with IPv6 addresses, but there
are also 52 fallback directory mirrors with IPv6 addresses.
Resolves 19760.
If "1" is not 64 bits wide already, then "1 << i" will not actually
work.
This bug only affects the TEST_BITOPS code, and shouldn't matter for
the actual use of the timeout code (except if/when it causes this
test to fail).
Reported by dcb314@hotmail.com. Fix for bug 23583. Not adding a
changes file, since this code is never compiled into Tor.
Use this value instead of hardcoded values of 32 everywhere. This also
addresses the use of REND_DESC_ID_V2_LEN_BASE32 in
hs_lookup_last_hid_serv_request() for the HSDir encoded identity digest length
which is accurate but semantically wrong.
Fixes#23305.
Signed-off-by: David Goulet <dgoulet@torproject.org>
RENDEZVOUS1 cell is 84 bytes long in v3 and 168 bytes long in v2 so this
commit pads with random bytes the v3 cells up to 168 bytes so they all look
alike at the rendezvous point.
Closes#23420
Signed-off-by: David Goulet <dgoulet@torproject.org>
This warning is caused by a different tv_usec data type on macOS
compared to the system on which the patch was developed.
Fixes 23575 on 0.3.2.1-alpha.
It is highly unlikely to happen but if so, we need to know and why. The
warning with the next_run values could help.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When the KIST schedule() is called, it computes a diff value between the last
scheduler run and the current monotonic time. If tha value is below the run
interval, the libevent even is updated else the event is run.
It turned out that casting to int32_t the returned int64_t value for the very
first scheduler run (which is set to 0) was creating an overflow on the 32 bit
value leading to adding the event with a gigantic usec value. The scheduler
was simply never running for a while.
First of all, a BUG() is added for a diff value < 0 because if the time is
really monotonic, we should never have a now time that is lower than the last
scheduler run time. And we will try to recover with a diff value to 0.
Second, the diff value is changed to int64_t so we avoid this "bootstrap
overflow" and future casting overflow problems.
Fixes#23558
Signed-off-by: David Goulet <dgoulet@torproject.org>
This was introduced in 4ff170d7b1, and is probably
unreachable, but coverity complained about it (CID 1417761). Bug not
in any released Tor, so no changes file.
Otherwise integer overflows can happen. Remember, doing a i32xi32
multiply doesn't actually produce a 64-bit output. You need to do
i64xi32 or i64xi64.
Coverity found this as CID 1417753
Each type of scheduler implements its own static scheduler_t object and
returns a reference to it.
This commit also makes it a const pointer that is it can only change inside
the scheduler type subsystem but not outside for extra protection.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead, add wrappers to do the needed action the different scheduler needs
with the libevent object.
Signed-off-by: David Goulet <dgoulet@torproject.org>
A channel can bounce in the scheduler and bounce out with the IDLE state which
means that if it came in the scheduler once, it has socket information that
needs to be freed from the global hash table.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This option is a list of possible scheduler type tor can use ordered by
priority. Its default value is "KIST,KISTLite,Vanilla" which means that KIST
will be used first and if unavailable will fallback to KISTLite and so on.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is possible that tor was compiled with KIST support but the running kernel
has no support for it. In that case, fallback to a naive approach and flag
that we have no kernel support.
At this commit, if the kernel support is disabled, there are no ways to come
back from it other than restarting tor with a kernel that supporst KIST.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a detection for the KIST scheduler in our build system and set
HAVE_KIST_SUPPORT if available.
Adapt the should use kist function with this new compile option.
Signed-off-by: David Goulet <dgoulet@torproject.org>
- HT_FOREACH_FN defined in an additional place because nickm did that
in an old kist prototype
- Make channel_more_to_flush mockable for future sched tests
- Add empty scheduler_{vanilla,kist}.c files and put in include.am
Signed-off-by: David Goulet <dgoulet@torproject.org>
- massive change to src/tgest/test_options.c since the sched options
were added all over the place in it
- removing the sched options caused some tests to pass/fail in new ways
so I assumed current behavior is correct and made them pass again
- ex: "ConnLimit must be greater" lines
- ex: "Authoritative directory servers must" line
- remove test_options_validate__scheduler in prep for new sched tests
Signed-off-by: David Goulet <dgoulet@torproject.org>
An unnecessary routerlist check in the NETINFO clock skew detection in
channel_tls_process_netinfo_cell() was preventing clients from
reporting NETINFO clock skew to controllers.
This patch replaces a few calls to router_get_by_id_digest ("do we
have a routerinfo?") with connection_or_digest_is_known_relay ("do
we know this relay to be in the consensus, or have been there some
time recently?").
Found while doing the 21585 audit; fixes bug 23533. Bugfix on
0.3.0.1-alpha.
The memleak was occuring because of the way ExcludeNodes is handled in
that function. Basically, we were putting excluded intro points extend
infos in a special variable which was never freed. Also, if there were
multiple excluded intro points then that variable was overwritten
everytime leaking more memory. This commit should fix both issues.
This commit adds a pretty advanced test for the client-side making sure that
picking intro is done properly.
This unittest also reveals a memleak on the client_pick_intro() function which
is fixed by the subsequent commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Using a test vector in python, test both hs_build_hsdir_index() and
hs_build_hs_index().
This commit also adds the hs_build_address.py to EXTRA_DIST which was missing.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Do two major improvements:
a) Make the client pick 6 HSDirs instead of just 1 and make sure they
all match the service's HSDirs.
b) Test two additional missing scenarios borrowed from the
test_reachability() test.
Make download status next attempts reported over the control port
consistent with the time used by tor. This issue only occurs if a
download status has not been reset before it is queried over the
control port.
Fixes 23525, not in any released version of tor.
If future code asks if there are any running bridges, without checking
if bridges are enabled, log a BUG warning rather than crashing.
Fixes 23524 on 0.3.0.1-alpha
Change the contract of control_event_bootstrap_problem() to be more
general and to take a connection_t. New function
control_event_bootstrap_prob_or() has the specific or_connection_t
funcionality previously used.
Fix the test_build_address() test and its test vectors python script.
They were both using a bogus pubkey for building an HS address which
does not validate anymore.
Also fix a few more unittests that were using bogus onion addresses
and were failing the validation. I replaced the bogus address with
the one generated from the test vector script.
Directory servers now include a "Date:" http header for response
codes other than 200. Clients starting with a skewed clock and a
recent consensus were getting "304 Not modified" responses from
directory authorities, so without a Date header the client would
never hear about a wrong clock.
Fixes bug 23499; bugfix on 0.0.8rc1.
We enrich the test_client_cache() test in two ways:
a) We check that transitioning time periods also cleans up expired
descriptors in client memory.
b) We test hs_cache_lookup_as_client() instead of
lookup_v3_desc_as_client(). The former is a higher level function
which calls the latter and allows us to test deeper into the
subsystem.
In #23466 we discovered that cached descriptors can stay around on the
client-side for up to 72 hours. In reality we only want those descs to
get cached for the duration of the current time period, since after that
TP is gone the client needs to compute a new blinded key to use for the HS.
In this commit we start using the consensus time (if available) when
cleaning up cached client descriptor entries. That makes sense because
the client uses consensus time anyway for connecting to hidden
services (e.g. computing blinded keys and time periods).
If no recent consensus is available, we consider descriptors to be
expired since we will want to fetch new ones when we get a live
consensus to avoid the Roger bug. If we didn't do that, when Roger
desuspends his laptop there would be a race between Tor fetching a new
consensus, and Tor connecting to the HS which would still cause
reachability issues.
We also turned a rev counter check into a BUG, since we should never
receive a descriptor with a strictly smaller rev counter than the one we
already have, except if there is a bug or if the HSDir wants to mess
with us. In any case, let's turn this into a BUG so that we can detect
and debug such cases easily.
This change refactors find_dl_schedule() to only call dependent functions
as needed. In particular, directory_fetches_from_authorities() only needs
to be called on clients.
Stopping spurious directory_fetches_from_authorities() calls on every
download on public relays has the following impacts:
* fewer address resolution attempts, particularly those mentioned in 21789
* fewer descriptor rebuilds
* fewer log messages, particularly those limited in 20610
Fixes 23470 in 0.2.8.1-alpha.
The original bug was introduced in commit 35bbf2e as part of prop210.
OpenBSD doesn't like tricks where you use a too-wide sscanf argument
for a too-narrow array, even when you know the input string
statically. The fix here is just to use bigger buffers.
Fixes 15582; bugfix on a3dafd3f58 in 0.2.6.2-alpha.
But when clients are just starting, make them try each bridge a few times
before giving up on it.
These changes make the bridge download schedules more explicit: before
17750, they relied on undocumented behaviour and specific schedule
entries. (And between 17750 and this fix, they were broken.)
Fixes 23347, not in any released version of tor.
We were always incrementing bridge download statuses on each attempt,
but we were using the "increment on failure" functions to do it.
And we never incremented them on failure.
No behaviour change.
The download schedule tells Tor to wait 15 minutes before downloading
bridge descriptors. But 17750 made Tor ignore that and start immediately.
Since we fixed 17750, Tor waits 15 minutes for bridge client bootstrap,
like the schedule says.
This fixes the download schedule to start immediately, and to try each
bridge 3 times in the first 30 seconds. This should make bridge bootstraps
more reliable.
Fixes 23347.
It is possible that two descriptor upload requests are launched in a very
short time frame which can lead to the second request finishing before the
first one and where that first one will make the HSDir send back a 400
malformed descriptor leading to a warning.
To avoid such, cancel all active directory connections for the specific
descriptor we are about to upload.
Note that this race is still possible on the HSDir side which triggers a log
info to be printed out but that is fine.
Fixes#23457
Signed-off-by: David Goulet <dgoulet@torproject.org>
When option validation or transition is happening, there are no
"current options" -- only "old options" and "maybe new options".
Looking at get_options() is likely a mistake, so have a nonfatal
assertion let us know if we do that.
Closes 22281.
Because we can get a RENDEZVOUS2 cell before the INTRODUCE_ACK, we need to
correctly handle the circuit purpose REND_JOINED that is not change its
purpose when we get an INTRODUCE_ACK and simply close the intro circuit
normally.
Fixes#23455
Signed-off-by: David Goulet <dgoulet@torproject.org>
Before, this function meant "can we connect to this node and
authenticate it using its ed25519 key?" Now it can additionally
mean, "when somebody else connects to this node, do we expect that
they can authenticate using the node's ed25519 key"?
This change lets us future-proof our link authentication a bit.
Closes ticket 20895. No backport needed, since ed25519 link
authentication support has not been in any LTS release yet, and
existing releases with it should be obsolete before any releases
without support for linkauth=3 are released.
This test is important because it tests that upload_descriptor_to_all()
is in synch with pick_hsdir_v3(). That's not the case for the
reachability test which just compares the responsible hsdir sets.
There was a bug in upload_descriptor_to_all() where we picked between
first and second hsdir index based on which time segment we are. That's
not right and instead we should be uploading our two descriptors using a
different hsdir index every time. That is, upload first descriptor using
first hsdir index, and upload second descriptor using second hdsir index.
Also simplify stuff in pick_hdsir_v3() since that's only used to fetch
descriptors and hence we can just always use the fetch hsdir index.
Because of the latest changes on when we rotate, longer lifetime of
descriptors and no more overlap period, the tests needed to be improved to
test more functionnalities.
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, this fixes#23372.
Second, the consensus timings for the build descriptor have been changed to
the current test can pass. More extensive tests of descriptor rotation are
coming in a commit near you because the rotation and time period logic has
been changed.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is a large and important unit test for the hidden service version
3! It tests the service reachability for a client using different
consensus timings and makes sure that the computed hashring is the same
on both side so it is actually reachable.
Signed-off-by: David Goulet <dgoulet@torproject.org>
With the latest change on how we use the HSDir index, the client and service
need to pick their responsible HSDir differently that is depending on if they
are before or after a new time period.
The overlap mode is active function has been renamed for this and test added.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because of #23387, we've realized that there is one scenario that makes
the client unable to reach the service because of a desynch in the time
period used. The scenario is as follows:
+------------------------------------------------------------------+
| |
| 00:00 12:00 00:00 12:00 00:00 12:00 |
| SRV#1 TP#1 SRV#2 TP#2 SRV#3 TP#3 |
| |
| $==========|-----------$===========|-----------$===========| |
| ^ ^ |
| C S |
+------------------------------------------------------------------+
In this scenario the HS has a newer consensus than the client, and the
HS just moved to the next TP but the client is still stuck on the old
one. However, the service is not in any sort of overlap mode so it
doesn't cover the old TP anymore, so the client is unable to fetch a
descriptor.
We've decided to solve this by extending the concept of overlap period
to be permanent so that the service always publishes two descriptors and
aims to cover clients with both older and newer consensuses. See the
spec patch in #23387 for more details.
Based on our #23387 findings, it seems like to maintain 24/7
reachability we need to employ different logic when computing hsdir
indices for fetching vs storing. That's to guarantee that the client
will always fetch the current descriptor, while the service will always
publish two descriptors aiming to cover all possible edge cases.
For more details see the next commit and the spec branch.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The pruning process and the deleting ephemeral service function iterates over
all circuits and were asserting on rend_data for a matching circuit. This is
not good because now we have v3 circuits without a rend_data.
Fixes#23429
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the valid_after time from the consensus to get the time period number else
we might get out of sync with the overlap period that uses valid_after.
Make it an optional feature since some functions require passing a
specific time (like hs_get_start_time_of_next_time_period()).
Signed-off-by: David Goulet <dgoulet@torproject.org>
Undeprecate it;
rename it to TestingClientDNSRejectInternalAddresses;
add the old name as an alias;
reject configurations where it is set but TestingTorNetwork is not;
change the documentation accordingly.
Closes tickets 21031 and 21522.
Version 3 hidden service needs rendezvous point that have the protocol version
HSRend >= 2 else the rendezvous cells are rejected.
Fixes#23361
Signed-off-by: David Goulet <dgoulet@torproject.org>
There are two reasons this is likeliest to happen -- no kernel
support, and some bug in Tor. We'll ask people to check the former
before they report. Closes 23090.
The chdir() call in RunAsDaemon makes the behavior here surprising,
and either way of trying to resolve the surprise seems sure to
startle a significant fraction of users. Instead, let's refuse to
guess, and refuse these configurations.
Closes ticket 22731.
I'm doing this using the Proxy-Authorization: header to support
clients that understand it, and with a new tor-specific header that
makes more sense for our use.
By convention, a function that frobs a foo_t should be called
foo_frob, and it should have a foo_t * as its first argument. But
for many of the buf_t functions, the buf_t was the final argument,
which is silly.
Our convention is that functions which manipulate a type T should be
named T_foo. But the buffer functions were super old, and followed
all kinds of conventions. Now they're uniform.
Here's the perl I used to do this:
\#!/usr/bin/perl -w -i -p
s/read_to_buf\(/buf_read_from_socket\(/;
s/flush_buf\(/buf_flush_to_socket\(/;
s/read_to_buf_tls\(/buf_read_from_tls\(/;
s/flush_buf_tls\(/buf_flush_to_tls\(/;
s/write_to_buf\(/buf_add\(/;
s/write_to_buf_compress\(/buf_add_compress\(/;
s/move_buf_to_buf\(/buf_move_to_buf\(/;
s/peek_from_buf\(/buf_peek\(/;
s/fetch_from_buf\(/buf_get_bytes\(/;
s/fetch_from_buf_line\(/buf_get_line\(/;
s/fetch_from_buf_line\(/buf_get_line\(/;
s/buf_remove_from_front\(/buf_drain\(/;
s/peek_buf_startswith\(/buf_peek_startswith\(/;
s/assert_buf_ok\(/buf_assert_ok\(/;
This lets us drop the testing-only function buf_get_first_chunk_data(),
and lets us implement proto_http and proto_socks without looking at
buf_t internals.
The service needs the latest SRV and set of relays for the best accurate
hashring to upload its descriptor to so it needs a live consensus thus don't
do anything until we have it.
Fixes#23331
Signed-off-by: David Goulet <dgoulet@torproject.org>
When merging #20657, somehow hs_service_dir_info_changed() became unused
leading to not use the re-upload to HSDir when we were missing information
feature.
Turns out that it is not possible to pick an HSDir with a missing descriptor
because in order to compute the HSDir index, the descriptor is mandatory to
have so we can know its position on the hashring.
This commit removes that dead feature and fix the
hs_service_dir_info_changed() not being used.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Based on questions and comments from dgoulet, I've tried to fill
in the reasoning about why these functions work in the way that they
do, so that it will be easier for future programmers to understand
why this code exists and works the way it does.
We used to check if it was set to 0 which is what unused circuit have but when
the rendezvous circuit was cannibalized, the timestamp_dirty is not 0 but we
still need to reset it so we can actually use it without having the chance of
expiring the next second (or very soon).
Fixes#23123
Signed-off-by: David Goulet <dgoulet@torproject.org>
The function was never returning an error code on failure to parse the
OutboundAddress* options.
In the process, it was making our test_options_validate__outbound_addresses()
not test the right thing.
Fixes#23366
Signed-off-by: David Goulet <dgoulet@torproject.org>
This fixes a serious bug in our hsdir set change logic:
We used to add nodes in the list of previous hsdirs everytime we
uploaded to a new hsdir and we only cleared the list when we built a new
descriptor. This means that our prev_hsdirs list could end up with 7
hsdirs, if for some reason we ended up uploading our desc to 7 hsdirs
before rebuilding our descriptor (e.g. this can happen if the set of
hsdirs changed).
After our previous hdsir set had 7 nodes, then our old algorithm would
always think that the set has changed since it was comparing a smartlist
with 7 elements against a smartlist with 6 elements.
This commit fixes this bug, by clearning the prev_hsdirs list before we
upload to all hsdirs. This makes sure that our prev_hsdirs list always
contains the latest hsdirs!
Our logic for detecting hsdir set changes was needlessly compicated: we
had to sort smartlists and compare them.
Instead, we can simplify things by employing the following logic:
"We should reupload our descriptor if the latest HSDir set contains
nodes that were not previously there"
Since we can't be sure that we can unlink enough files on windows
here, let's let the number of permitted entries grow huge if it
really must.
We do this by letting the storagedir hold lots of entries, but still
trying to keep the number of entries under the configured limit. We
also have to tell consdiffmgr not to freak out if it can't actually
remove enough entries.
Part of a fix for bug 22752
Some parentheses were missing making the rend_max_intro_circs_per_period()
return a lower value than it was suppose to.
The calculation is that a service at most will open a number of intro points
that it wants which is 3 by default or HiddenServiceNumIntroductionPoints. Two
extra are launched for performance reason. Finally, this can happen twice for
two descriptors for the current and next time period.
From:
2 * n_intro_wanted + 2
...which resulted in 8 for 3 intro points, this commit fixes it to:
(n_intro_wanted + 2) * 2
... resulting in 12 possible intro point circuit which is the correct maximum
intro circuit allowed per period.
Last, this commit rate limits the the log message if we ever go above that
limit else over a INTRO_CIRC_RETRY_PERIOD, we can print it often!
Fixes#22159
Signed-off-by: David Goulet <dgoulet@torproject.org>
Since ssize_t is signed and might be 64 bits, we should use
tt_i64_op to make sure it's positive. Otherwise, if it is negative,
and we use tt_u64_op, we'll be treating it as a uint64_t, and we
won't detect negative values.
This fixes CID 1416338 and 1416339. Bug not in any released Tor.
That check was wrong:
a) We should be making sure that the size of `key` is big enough before
proceeding, since that's the buffer that we would overread with the
tor_memeq() below.
The old check used to check that `req_key_str` is big enough which is
not right, since we won't read deep into that buffer.
The new check makes sure that `key` has enough size to survive the
tor_memeq(), and if not it moves to the next element of the strmap.
b) That check shouldn't be a BUG since that strmap contains
variable-sized elements and we should not be bugging out if we happen
to compare a small sized element (v2) to a bigger one (v3).
This way, we can clear off the directory requests from our cache and thus
allow the next client to query those HSDir again at the next SOCKS connection.
Signed-off-by: David Goulet <dgoulet@torproject.org>
v3 client now cleans up the HSDir request cache when a connection to a service
was successful.
Closes#23308
Signed-off-by: David Goulet <dgoulet@torproject.org>
We used to not copy the state which means that after HUP we would forget
if we are in overlap mode or not. That caused bugs where the service
would enter overlap mode twice, and rotate its descs twice, causing all
sorts of bugs.
Apart from the fact that a newly allocated service doesn't have descriptors
thus the move condition can never be true, the service needs the descriptor
signing key to cross-certify the authentication key of each intro point so we
need to move the descriptors between services and not only the intro points.
Fixes#23056
Signed-off-by: David Goulet <dgoulet@torproject.org>
We refactor the descriptor reupload logic to be similar to the v2 logic
where we update a global 'consider_republishing_rend_descriptors' flag
and then we use that to check for hash ring changes during the global
hidden service callbacks.
This fixes bugs where we would inspect the hash ring immediately as we
receive new dirinfo (e.g. consensus) but before running the hidden
service housekeeping events. That was leaving us in an inconsistent
state wrt hsdir indices and causing bugs all around.
The problem was that when we went from overlap mode to non-overlap mode,
we were not wiping the 'desc_next' descriptor and instead we left it on
the service. This meant that all functions that iterated service
descriptors were also inspecting the useless 'desc_next' descriptor that
should have been deleted.
This commit refactors rotate_all_descriptors() so that it rotates
descriptor both when entering overlap mode and also when leaving it.
The `test-operator-cleanup` patch, and related coccinelle patches,
don't do any checks for line length. This patch fixes the line
length issues caused by the previous commits.
This patch fixes the operator usage in src/test/*.c to use the symbolic
operators instead of the normal C comparison operators.
This patch was generated using:
./scripts/coccinelle/test-operator-cleanup src/test/*.[ch]
A client can re-extend up to 3 intro points on the same circuit. This happens
when we get NACKed by the intro point for which we choose a new intro and
re-extend the circuit to it.
That process can be arbitrarly long so reset the dirty timestamp of the
circuit everytime we choose to re-extend so we get a bit more time to actually
do our introduction.
This is a client circuit so it is short live once opened thus giving us a bit
more time to complete the introduction is ok.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When looking for an introduction circuit in circuit_get_best(), we log an info
message if we are about to launch a new intro circuit in parallel. However,
the condition was considering marked for close circuit leading to the function
triggering the log info even though there is actually no valid intro circuit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Only register the RP circuit when it opens and not when we send the INTRODUCE1
cell else, when re-extending to a new IP, we would register the same RP
circuit with the same cookie twice leading to the circuit being closed.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Changed the assert_intro_circ_ok() to an almost non fatal function so tor can
recover properly. We keep the anonymity assert because if that is not right,
we have much deeper problems and client should stop sending bytes to the
network immediately.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This function has been replaced by hs_client_receive_rendezvous_acked(() doing
the same exact thing for both v2 and v3 service.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The client needs to find the right intro point object from the circuit
identity digest it is opened to. This new function does that.
Signed-off-by: David Goulet <dgoulet@torproject.org>
New function named hs_cell_introduce1_data_clear() is introduced to clear off
an hs_cell_introduce1_data_t object.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a client decodes a descriptor, make sure it matches the expected blinded
key which is derived from the hidden service identity key.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We can't trigger a valid upload because it would require us to MOCK a long
list of functions ultimately not really testing the upload because we aren't
on a running network.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Conflicts:
src/test/test_hs_service.c
Needed by the client when fetching a descriptor. This function checks the
directory purpose and hard assert if it is not for fetching.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit makes the client use the intro point state cache. It notes down
when we get a NACK from the intro point and then uses that cache to decide if
it should either close the circuits or re-extend to a new intro point.
This also introduces a very useful function that checks if an intro point is
usable that is query the state cache and checks a series of requirement.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This cache keeps track of the state of intro points which is needed when we
have failures when using them. It is similar to the failure cache of the
legacy system.
At this commit, it is unused but initialized, cleanup and freed.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This moves it to hs_client.c so it can be used by both system (legacy and
prop224). For now, only the legacy system uses it.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Don't assert() on rend_data when closing circuits to report an IP failure. The
prop224 code doesn't have yet the support for this.
Signed-off-by: David Goulet <dgoulet@torproject.org>
For now, prop224 doesn't have a mechanism to note down connection attempts so
we only do it for legacy system using rend_data.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The client can now handle RENDEZVOUS2 cell when they arrive. This consolidate
both hidden service version in one function.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The client is now able to handle an INTRODUCE_ACK cell and do the appropriate
actions.
An intro point failure cache is missing and a way to close all intro point
that were launched in parallel. Some notes are in the comment for that.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a function to parse an INTRODUCE_ACK cell in hs_cell.c. Furthermore, add
an enum that lists all possible expected status code.
Signed-off-by: David Goulet <dgoulet@torproject.org>
From an edge connection object, add a function that randomly pick an
introduction point for the requested service.
This follows the code design of rend_client_get_random_intro() and returns an
extend_info_t object ready to be used to extend to.
At this commit, it is not used yet.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a descriptor fetch has completed and it has been successfully stored in
the client cache, this callback will take appropriate actions to attach
streams and/or launch neede circuits to connect to the service.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Client now handles a RENDEZVOUS_ESTABLISHED cell when it arrives on the
rendezvous circuit. This new function applies for both the legacy system and
prop224.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a function to build the cell.
Add a the logic to send the cell when the rendezvous circuit opens.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Make a single entry point for the entire HS subsystem when a client circuit
opens (every HS version).
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a function in hs_cell.{c|h} for a client to build an INTRODUCE1 cell using
an object that contains all the needed keys to do so.
Add an entry point in hs_client.c that allows a tor client to send an
INTRODUCE1 cell on a given introduction circuit.
It includes the building of the cell, sending it and the setup of the
rendezvous circuit with the circuit identifier.
The entry point function is still unused at this commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The hs circuit file had this function that takes a list of link specifiers and
return a newly allocated extend info object. Make it public so the client side
can also use it to be able to extend to introduction point.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Put all the possible assert() we can do on a client introduction circuit in
one helper function to make sure it is valid and usable.
It is disabled for now so gcc doesn't complain that we have a unused function.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit only moves code into a function. The client code will need a way
to take a bunch of descriptor link specifier object and encode them into link
specifiers objects.
Make this a public function so it can be used outside of hs_descriptor.c.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This will be useful to the hidden service subsystem that needs to go over all
connections of a certain state to attach them to a hidden service circuit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
- Add tests that ensure that SOCKS requests for v2/v3 addresses get
intercepted and handled.
- Add test that stores and lookups an HS descriptor in the client-side cache.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Once a descriptor has been successfully downloaded from an HSDir, we flag the
directory connection to "has fetched descriptor" so the connection subsystem
doesn't trigger a new fetch on success.
Same has DIR_PURPOSE_HAS_FETCHED_RENDDESC_V2 but for prop224.
Signed-off-by: David Goulet <dgoulet@torproject.org>
- Also add tests for the hidserv_req subsystem.
- Introduce purge_v2_hidserv_req() wrapper to simplify v2 code.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Specifically move the pick_hsdir() function and all the HSDir request tracking
code. We plan to use all that code both for v2 and v3.
This commit only moves code.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Right now there's a single warn_if_unnamed flag for
router_get_consensus_status_by_nickname() and
node_get_by_nickname(), that is nearly always 1. I've turned it
into an 'unsigned' bitfield, and inverted its sense. I've added the
flags argument to node_get_by_hex_id() too, though it does nothing
there right now.
I've removed the router_get_consensus_status_by_nickname() function,
since it was only used in once place.
This patch changes the warning behavior of GETINFO ns/name/<name>,
since all other name lookups from the controller currently warn.
Later I'm going to add more flags, for ed25519 support.
We will need to edit this function, and it's already pretty huge. Let's make
it a bit smaller.
This commit moves code, fixes a 80 char line and add two lines at the start to
make it compile. Trivial change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We need this func so that we recognize SOCKS conns to v3 addresses.
- Also rename rend_valid_service_id() to rend_valid_v2_service_id()
- Also move parse_extended_hostname() tests to their own unittest, and
add a v3 address to the test as well.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When we enter overlap mode we start using the next hsdir index of
relays. However, we only compute the next hsdir index of relays when we
receive a consensus or their descriptor. This means that there is a
window of time between entering the overlap period and fetching the
consensus where relays have their next hsdir index uninitialized. This
patch fixes this by recomputing all hsdir indices when we first enter
the overlap period.
We want to reupload our descriptor if its set of responsible HSDirs
changed to minimize reachability issues.
This patch adds a callback everytime we get new dirinfo which checks if
the hash ring changed and reuploads descriptor if needed.
Because the HS subsystem calls it every second, change the log level to debug
so it doesn't spam the info log.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Our Windows compiler treats "time_t" as long long int but Linux likes it
long int so cast those to make Windows happy.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the PATH_SEPARATOR for a path comparaison so it works with Windows as
well.
Partially fix#23223
Signed-off-by: David Goulet <dgoulet@torproject.org>
This change should improve overhead for downloading small numbers of
descriptors and microdescriptors by improving compression
performance and lowering directory request overhead.
Closes ticket 23220.
The old implementation would fail with super-long inputs. We never
gave it any, but still, it's nicer to dtrt here.
Reported by Guido Vranken. Fixes bug 19281.
- Fix various ssize_t/size_t confusions in the tests.
- Fix a weird memset argument:
"bad_memset: Argument -16 in memset loses precision in
memset(&desc_two->blinded_kp.pubkey.pubkey, -16, 32UL)."
- Fix check_after_deref instance in check_state_line_for_service_rev_counter():
"check_after_deref: Null-checking items suggests that it may be null,
but it has already been dereferenced on all paths leading to the
check."
Add a common function for both legacy and prop224 hidden service to increment
and decrement the rendezvous stream counter on an origin circuit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We used to have a small HS desc cert lifetime but those certs can stick
around for 36 hours if they get initialized in the beginning of overlap
period.
[warn] Bug: Non-fatal assertion !(hs_desc_encode_descriptor(desc->desc, &desc->signing_kp, &encoded_desc) < 0) failed in
upload_descriptor_to_hsdir at src/or/hs_service.c:1886. Stack trace: (on Tor 0.3.2.0-alpha-dev b4a14555597fb9b3)
I repurposed the old directory_request_set_hs_ident() into a new
directory_request_upload_set_hs_ident() which is only used for the
upload purpose and so it can assert on the dir_purpose.
When coding the client-side we can make a second function for fetch.
We used to do:
h = H(BLIND_STRING | H(A | s | B | N )
when we should be doing:
h = H(BLIND_STRING | A | s | B | N)
Change the logic so that hs_common.c does the hashing, and our ed25519
libraries just receive the hashed parameter ready-made. That's easier
than doing the hashing on the ed25519 libraries, since that means we
would have to pass them a variable-length param (depending on whether
's' is set or not).
Also fix the ed25519 test vectors since they were also double hashing.
We also had to alter the SRV functions to take a consensus as optional
input, since we might be setting our HSDir index using a consensus that
is currently being processed and won't be returned by the
networkstatus_get_live_consensus() function.
This change has two results:
a) It makes sure we are using a fresh consensus with the right SRV value
when we are calculating the HSDir hash ring.
b) It ensures that we will not use the sr_get_current/previous()
functions when we don't have a consensus which would have falsely
triggered the disaster SRV logic.
In Nick's words:
"We want to always return false if the platform is a Tor version, and it
is not as new as 0.3.0.8 -- but if the platform is not a Tor version, or
if the version is as new as 0.3.0.8, then we want to obey the protocol
list.
That way, other implementations of our protocol won't have to claim any
particular Tor version, and future versions of Tor will have the freedom
to drop this protocol in the distant future."
- Fix log message format string.
- Do extra circuit purpose check.
- wipe memory in a clear function
- Make sure we don't double add intro points in our list
- Make sure we don't double close intro circuits.
- s/tt_u64_op/tt_i64_op/
Turns out that introduction points don't care about the INTRODUCE2 cell
format as long as the top field is LEGACY_KEY_ID as expected. So let's
use a single INTRODUCE format regardless of the introduction point being
legacy or not.
This also removes the polymorphic void* situation.
Signed-off-by: David Goulet <dgoulet@torproject.org>
To upload the descriptor we needed a state file to write the rev counters in,
but that test did not have a state file initialized.
Also fix the typo in its func name.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We consider to be in overlap mode when we are in the period of time between a
fresh SRV and the beginning of the new time period (in the normal network this
is between 00:00 and 12:00 UTC). This commit edits that function to use the
above semantic logic instead of absolute times.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It used to be that time periods were 24 hours long even on chutney,
which made testing harder. With this commit, time periods have the same
length as a full SRV protocol run, which means that they will change
every 4 minutes in a 10-second voting interval chutney network!
Make this function public so we can use it both in hs_circuit.c and
hs_service.c to avoid code duplication.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This introduces a callback to relaunch a service rendezvous circuit when a
previous one failed to build or expired.
It unifies the legacy function rend_service_relaunch_rendezvous() with one for
specific to prop224. There is now only one entry point for that which is
hs_circ_retry_service_rendezvous_point() supporting both legacy and prop224
circuits.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Change the timing for intro point's lifetime and maximum amount of circuit we
are allowed to launch in a TestingNetwork. This is particurlarly useful for
chutney testing to test intro point rotation.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When the circuit is about to be freed which has been marked close before, for
introduction circuit we now call this has_closed() callback so we can cleanup
any introduction point that have retried to many times or at least flag them
that their circuit is not established anymore.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We used to use NULL subcredential which is a terrible terrible idea. Refactor
HS unittests to use subcredentials.
Also add some non-fatal asserts to make sure that we always use subcredentials
when decoding/encoding descs.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit refactors the handle_hs_exit_conn() function introduced at a prior
commit that connects the rendezvous circuit to the edge connection used to
connect to the service virtual port requested in a BEGIN cell.
The refactor adds the support for prop224 adding the
hs_service_set_conn_addr_port() function that has the same purpose has
rend_service_set_connection_addr_port() from the legacy code.
The rend_service_set_connection_addr_port() has also been a bit refactored so
the common code can be shared between the two HS subsystems (legacy and
prop224).
In terms of functionallity, nothing has changed, we still close the circuits
in case of failure for the same reasons as the legacy system currently does.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit simply moves the code from the if condition of a rendezvous
circuit to a function to handle such a connection. No code was modified
_except_ the use or rh.stream_id changed to n_stream->stream_id so we don't
have to pass the cell header to the function.
This is groundwork for prop224 support which will break down the
handle_hs_exit_conn() depending on the version of hidden service the circuit
and edge connection is for.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Introduction point are rotated either if we get X amounts of INTRODUCE2 cells
on it or a time based expiration. This commit adds two consensus parameters
which are the min and max value bounding the random value X.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Imagine a Tor network where you have only 8 nodes available due to some
reasons. And your hidden service wants 8 introduction points. Everything is
fine but then a node goes down bringing the network to 7. The service will
retry 3 times that node and then give up but keep it in a failure cache for 5
minutes (INTRO_CIRC_RETRY_PERIOD) so it doesn't retry it non stop and exhaust
the maximum number of circuit retry.
In the real public network today, this is unlikely to happen unless the
ExcludeNodes list is extremely restrictive.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit adds a directory command function to make an upload directory
request for a service descriptor.
It is not used yet, just the groundwork.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This hsdir index value is used to give an index value to all node_t (relays)
that supports HSDir v3. An index value is then computed using the blinded key
to know where to fetch/upload the service descriptor from/to.
To avoid computing that index value everytime the client/service needs it, we
do that everytime we get a new consensus which then doesn't change until the
next one. The downside is that we need to sort them once we need to compute
the set of responsible HSDir.
Finally, the "hs_index" function is also added but not used. It will be used
in later commits to compute which node_t is a responsible HSDir for the
service we want to fetch/upload the descriptor.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add this helper function that can lookup and return all the needed object from
a circuit identifier. It is a pattern we do often so make it nicer and avoid
duplicating it everywhere.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add the entry point from the circuit subsystem of "circuit has opened" which
is for all type of hidden service circuits. For the introduction point, this
commit actually adds the support for handling those circuits when opened and
sending ESTABLISH_INTRO on a circuit.
Rendevzou point circuit aren't supported yet at this commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit adds the functionality for a service to build its descriptor.
Also, a global call to build all descriptors for all services is added to the
service scheduled events.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add the main loop entry point to the HS service subsystem. It is run every
second and make sure that all services are in their quiescent state after that
which means valid descriptors, all needed circuits opened and latest
descriptors have been uploaded.
For now, only v2 is supported and placeholders for v3 actions for that main
loop callback.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a function for both the client and service side that is building a blinded
key from a keypair (service) and from a public key (client). Those two
functions uses the current time period information to build the key.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a new and free function for hs_desc_intro_point_t so the service can use
them to setup those objects properly.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The GNU C Library (glibc) offers an function which allocates the
necessary memory automatically [0]. When it is available, we use that.
Otherwise we depend upon the `getcwd` function which requires a
preallocated buffer (and its size). This function was used incorrectly
by depending on the initial buffer size being big enough and otherwise
failing to return the current working directory. The proper way of
getting the current working directory requires a loop which doubles the
buffer size if `getcwd` requires it. This code was copied from [1] with
modifications to fit the context.
[0] https://www.gnu.org/software/hurd/hurd/porting/guidelines.html
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/getcwd.html
Fixes bug 23106; bugfix on 0.2.4.8-alpha.
Fortunately, we only support big-endian and little-endian platforms,
and on both of those, hton*() and ntoh*() behave the same. And if
we did start to support middle endian systems (haha, no), most of
_those_ have hton*(x) == ntoh*(x) too.
Since we start with desc_clean_since = 0, we should have been
starting with non-null desc_dirty_reason.
Fixes bug 22884; bugfix on 0.2.3.4-alpha when X-Desc-Gen-Reason was
added.
Patch from Vort; fixes bug 23081; bugfix on fd992deeea in
0.2.1.16-rc when set_main_thread() was introduced.
See the changes file for a list of all the symptoms this bug has
been causing when running Tor as a Windows Service.
The condition was always true meaning that we would reconsider updating our
directory information every 2 minutes.
If valid_until is 6am today, then now - 24h == 1pm yesterday which means that
"valid_until < (now - 24h)" is false. But at 6:01am tomorrow, "valid_until <
(now - 24h)" becomes true which is that point that we shouldn't trust the
consensus anymore.
Fixes#23091
Signed-off-by: David Goulet <dgoulet@torproject.org>
One log statement was a warning and has been forgotten. It is triggered for a
successful attempt at introducting from a client.
It has been reported here:
https://lists.torproject.org/pipermail/tor-relays/2017-August/012689.html
Three other log_warn() statement changed to protocol warning because they are
errors that basically can come from the network and thus triggered by anyone.
Fixes#23078.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We don't actually want Coverity to complain when a BUG() check can
never fail, since such checks can prevent us from introducing bugs
later on.
Closes ticket 23054. Closes CID 1415720, 1415724.
Now that half the threads are permissive and half are strict, we
need to make sure we have at least two threads, so that we'll
have at least one of each kind.
Instead of choosing a lower-priority job with a 1/37 chance, have
the chance be 1/37 for half the threads, and 1/2147483647 for the
other half. This way if there are very slow jobs of low priority,
they shouldn't be able to grab all the threads when there is better
work to do.
Each piece of queued work now has an associated priority value; each
priority goes on a separate queue.
With probability (N-1)/N, the workers will take work from the highest
priority nonempty queue. Otherwise, they'll look for work in a
queue of lower priority. This behavior is meant to prevent
starvation for lower-priority tasks.
In the Linux kernel, the BUG() macro causes an instant panic. Our
BUG() macro is different, however: it generates a nonfatal assertion
failure, and is usable as an expression.
Additionally, this patch tells util_bug.h to make all assertion
failures into fatal conditions when we're building with a static
analysis tool, so that the analysis tool can look for instances
where they're reachable.
Fixes bug 23030.
Wow, it sure seems like some compilers can't implement isnan() and
friends in a way that pleases themselves!
Fixes bug 22915. Bug trigged by 0.2.8.1-alpha and later; caused by
clang 4.
A prop224 descriptor was missing the onion key for an introduction point which
is needed to extend to it by the client.
Closes#22979
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove the legacy intro point key because both service and client only uses
the ed25519 key even though the intro point chosen is a legacy one.
This also adds the CLIENT_PK key that is needed for the ntor handshake.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We need to keep these around for TAP and old-style hidden services,
but they're obsolete, and we shouldn't encourage anyone to use them.
So I've added "obsolete" to their names, and a comment explaining
what the problem is.
Closes ticket 23026.
Closes bug 22964. Based on Teor's replacement there, but tries
to put the comment in a more logical place, and explain why we're
actually disabling compression in the first place.
There isn't much of a point of this buggy test afterall to add twice the same
service object but with a different key which ultinately can end up failing
the test because 1/N_BUCKETS of probability that we end up to put the service
in the same bucket.
Fixes#23023
Signed-off-by: David Goulet <dgoulet@torproject.org>
In zstd 1.3.0, once you have called ZSTD_endStream and been told
that your putput buffer is full, it really doesn't want you to call
ZSTD_compressStream again. ZSTD 1.2.0 didn't seem to mind about
this.
This patch fixes the issue by making sure never to call
ZSTD_endStream if there's any more data on the input buffer to
process, by flushing even when we're about to call "endStream", and
by never calling "compress" or "flush" after "endStream".
Fix for 22924. Bugfix on 0.2.9.1-alpha when the test was introducd
-- though it couldn't actually overflow until we fixed 17750.
Additionally, this only seems to overflow on 32-bit, and only when
the compiler doesn't re-order the (possibly dead) assignment out of
the way. We ran into it on a 32-bit ubuntu trusty builder.
Clang didn't like that we were passing uint64_t values to an API
that wanted uint32_t. GCC has either not cared, or has figured out
that the values in question were safe to cast to uint32_t.
Fixes bug22916; bugfix on 0.2.7.2-alpha.
It makes more sense to have the version in the configuration object of the
service because it is afterall a torrc option (HiddenServiceVersion).
Signed-off-by: David Goulet <dgoulet@torproject.org>
The added function frees any allocated pointers in a service configuration
object and reset all values to 0.
Signed-off-by: David Goulet <dgoulet@torproject.org>
As per nickm suggestion, an array of config handlers will not play well with
our callgraph tool.
Instead, we'll go with a switch case on the version which has a good side
effect of allowing us to control what we pass to the function intead of a fix
set of parameters.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a helper function to parse uint64_t and also does logging so we can reduce
the amount of duplicate code.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This tests our hs_config.c API to properly load v3 services and register them
to the global map. It does NOT test the service object validity, that will be
the hs service unit test later on.
At this commit, we have 100% code coverage of hs_config.c.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Every hidden service option don't apply to every version so this new function
makes sure we don't have for instance an option that is only for v2 in a v3
configured service.
This works using an exclude lists for a specific version. Right now, there is
only one option that is not allowed in v3. The rest is common.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Try to load or/and generate service keys for v3. This write both the public
and private key file to disk along with the hostname file containing the onion
address.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This also adds unit test and a small python script generating a deterministic
test vector that a unit test tries to match.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit adds the support in the HS subsystem for loading a service from a
set of or_options_t and put them in a staging list.
To achieve this, service accessors have been created and a global hash map
containing service object indexed by master public key. However, this is not
used for now. It's ground work for registration process.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Introduces hs_init() located in hs_common.c which initialize the entire HS v3
subsystem. This is done _prior_ to the options being loaded because we need to
allocate global data structure before we load the configuration.
The hs_free_all() is added to release everything from tor_free_all().
Note that both functions do NOT handle v2 service subsystem but does handle
the common interface that both v2 and v3 needs such as the cache and
circuitmap.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add the hs_config.{c|h} files contains everything that the HS subsystem needs
to load and configure services. Ultimately, it should also contain client
functions such as client authorization.
This comes with a big refactoring of rend_config_services() which has now
changed to only configure a single service and it is stripped down of the
common directives which are now part of the generic handler.
This is ground work for prop224 of course but only touches version 2 services
and add XXX note for version 3.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This object is the foundation of proposal 224 service work. It will change
and be adapted as it's being used more and more in the codebase. So, this
version is just a basic skeleton one that *will* change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
These statistics were largely ununsed, and kept track of statistical information
on things like how many time we had done TLS or how many signatures we had
verified. This information is largely not useful, and would only be logged
after receiving a SIGUSR1 signal (but only if the logging severity level was
less than LOG_INFO).
* FIXES#19871.
* REMOVES note_crypto_pk_op(), dump_pk_op(), and pk_op_counts from
src/or/rephist.c.
* REMOVES every external call to these functions.
Relay operators (especially bridge operators) can use this to lower
or raise the number of consensuses that they're willing to hold for
diff generation purposes.
This enables a workaround for bug 22883.
This reverts part of commit 706c44a6ce.
It was a mistake to remove these includes: they were needed on
systems where we have openssl 1.1.0 *and* libscrypt, and where we
were validating the one against the other.
Fixes bug 22892; bugfix on 0.3.1.1-alpha.
Groundwork for more prop224 service and client code. This object contains
common data that both client and service uses.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This change prevents us from generating corrupt messages when we
are confused about codepage settings, and makes Windows errors
consistent with the rest of our logs.
Fixes bug 22520; bugfix on 0.1.2.8-alpha. Patch from "Vort".
- Move some crypto structures so that they are visible by tests.
- Introduce a func to count number of hops in cpath which will be used
by the tests.
- Mark a function as mockable.
This commit paves the way for the e2e circuit unittests.
Add a stub for the prop224 equivalent of rend_client_note_connection_attempt_ended().
That function was needed for tests, since the legacy function would get
called when we attach streams and our client-side tests would crash with
assert failures on rend_data.
This also introduces hs_client.[ch] to the codebase.
This commit adds most of the work of #21859. It introduces hs_circuit.c
functions that can handle the setup of e2e circuits for prop224 hidden
services, and also for legacy hidden service clients. Entry points are:
prop224 circuits: hs_circuit_setup_e2e_rend_circ()
legacy client-side circuits: hs_circuit_setup_e2e_rend_circ_legacy_client()
This commit swaps the old rendclient code to use the new API.
I didn't try to accomodate the legacy service-side code in this API, since
that's too tangled up and it would mess up the new API considerably IMO (all
this service_pending_final_cpath_ref stuff is complicated and I didn't want to
change it).
Signed-off-by: David Goulet <dgoulet@torproject.org>
The legacy HS circuit code uses rend_data to match between circuits and
streams. We refactor some of that code so that it understands hs_ident
as well which is used for prop224.
circuit_init_cpath_crypto() is responsible for creating the cpath of legacy
SHA1/AES128 circuits currently. We want to use it for prop224 circuits, so we
refactor it to create circuits with SHA3-256 and AES256 as well.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We want to use the circuit_init_cpath_crypto() function to setup our
cpath, and that function accepts a key array as input. So let's make our
HS ntor key expansion function also return a key array as output,
instead of a struct.
Also, we actually don't need KH from the key expansion, so the key
expansion output can be one DIGEST256_LEN shorter. See here for more
info: https://trac.torproject.org/projects/tor/ticket/22052#comment:3
The 22081 fix disabled -Wfloat-conversion, but -Wfloat-conversion
didn't exist in every relevant mingw; it was added in GCC 4.9.x some
time, if the documentation can be trusted.
Bug not in any released version of tor.
When setting the maximum number of connections allowed by the OS,
always allow some extra file descriptors for other files.
Fixes bug 22797; bugfix on 0.2.0.10-alpha.
We just have to suppress these warnings: Mingw's math.h uses gcc's
__builtin_choose_expr() facility to declare isnan, isfinite, and
signbit. But as implemented in at least some versions of gcc,
__builtin_choose_expr() can generate type warnings even from
branches that are not taken.
Fixes bug 22801; bugfix on 0.2.8.1-alpha.
Our mock network put all the guards on the same IPv4 address, which
doesn't fly when we start applying EnforceDistinctSubnets. So in
this commit, I disable EnforceDistinctSubnets when running the old
guard_restriction_t test.
This commit also adds a regression test for #22753.
When the new path selection logic went into place, I accidentally
dropped the code that considered the _family_ of the exit node when
deciding if the guard was usable, and we didn't catch that during
code review.
This patch makes the guard_restriction_t code consider the exit
family as well, and adds some (hopefully redundant) checks for the
case where we lack a node_t for a guard but we have a bridge_info_t
for it.
Fixes bug 22753; bugfix on 0.3.0.1-alpha. Tracked as TROVE-2016-006
and CVE-2017-0377.
This patch fixes a crash in our LZMA module where liblzma will allocate
slightly more data than it is allowed to by its limit, which leads to a
crash.
See: https://bugs.torproject.org/22751
This makes our directory code check if a client is trying to fetch a
document that matches a digest from our latest consensus document.
See: https://bugs.torproject.org/22702
This patch ensures that the published_out output parameter is set to the
current consensus cache entry's "valid after" field.
See: https://bugs.torproject.org/22702
As of ac2f6b608a in 0.2.1.19-alpha,
Sebastian fixed bug 888 by marking descriptors as "impossible" by
digest if they got rejected during the
router_load_routers_from_string() phase. This fix stopped clients
and relays from downloading the same thing over and over.
But we never made the same change for descriptors rejected during
dirserv_add_{descriptor,extrainfo}. Instead, we tried to notice in
advance that we'd reject them with dirserv_would_reject().
This notice-in-advance check stopped working once we added
key-pinning and didn't make a corresponding key-pinning change to
dirserv_would_reject() [since a routerstatus_t doesn't include an
ed25519 key].
So as a fix, let's make the dirserv_add_*() functions mark digests
as undownloadable when they are rejected.
Fixes bug 22349; I am calling this a fix on 0.2.1.19-alpha, though
you could also argue for it being a fix on 0.2.7.2-alpha.
This mistake causes two possible bugs. I believe they are both
harmless IRL.
BUG 1: memory stomping
When we call the memset, we are overwriting two 0 bytes past the end
of packed_cell_t.body. But I think that's harmless in practice,
because the definition of packed_cell_t is:
// ...
typedef struct packed_cell_t {
TOR_SIMPLEQ_ENTRY(packed_cell_t) next;
char body[CELL_MAX_NETWORK_SIZE];
uint32_t inserted_time;
} packed_cell_t;
So we will overwrite either two bytes of inserted_time, or two bytes
of padding, depending on how the platform handles alignment.
If we're overwriting padding, that's safe.
If we are overwriting the inserted_time field, that's also safe: In
every case where we call cell_pack() from connection_or.c, we ignore
the inserted_time field. When we call cell_pack() from relay.c, we
don't set or use inserted_time until right after we have called
cell_pack(). SO I believe we're safe in that case too.
BUG 2: memory exposure
The original reason for this memset was to avoid the possibility of
accidentally leaking uninitialized ram to the network. Now
remember, if wide_circ_ids is false on a connection, we shouldn't
actually be sending more than 512 bytes of packed_cell_t.body, so
these two bytes can only leak to the network if there is another bug
somewhere else in the code that sends more data than is correct.
Fortunately, in relay.c, where we allocate packed_cell_t in
packed_cell_new() , we allocate it with tor_malloc_zero(), which
clears the RAM, right before we call cell_pack. So those
packed_cell_t.body bytes can't leak any information.
That leaves the two calls to cell_pack() in connection_or.c, which
use stack-alocated packed_cell_t instances.
In or_handshake_state_record_cell(), we pass the cell's contents to
crypto_digest_add_bytes(). When we do so, we get the number of
bytes to pass using the same setting of wide_circ_ids as we passed
to cell_pack(). So I believe that's safe.
In connection_or_write_cell_to_buf(), we also use the same setting
of wide_circ_ids in both calls. So I believe that's safe too.
I introduced this bug with 1c0e87f6d8
back in 0.2.4.11-alpha; it is bug 22737 and CID 1401591
This introduces node_supports_v3_hsdir() and node_supports_ed25519_hs_intro()
that checks the routerstatus_t of a node and if not present, checks the
routerinfo_t.
This is groundwork for proposal 224 service implementation in #20657.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is possible that at some point in time a client will encounter unknown or
new fields for an introduction point in a descriptor so let them ignore it for
forward compatibility.
Signed-off-by: David Goulet <dgoulet@torproject.org>
If `validate_only` is true, then just validate the configuration without warning
about it. This way, we only emit warnings when the listener is actually opened.
(Otherwise, every time we parse the config we will might re-warn and we would
need to keep state; whereas the listeners are only opened once.)
* FIXES#4019.
-authdir_mode_handles_descs(options, ROUTER_PURPOSE_BRIDGE) to authdir_mode_bridge(options).
- authdir_mode_handles_descs(options, ROUTER_PURPOSE_GENERAL) to authdir_mode_v3(options).
If COMPRESS_OK occurs but data is neither consumed nor generated,
treat it as a BUG and a COMPRESS_ERROR.
This change is meant to prevent infinite loops in the case where
we've made a mistake in one of our compression backends.
Closes ticket 22672.
(This approach can lose accuracy, but it's only in debug-level messages.)
Fixes windows compilation. Bugfix on recent compress.c changes; bug
not in any released Tor.
This prevents us from calling
allowed_anonymous_connection_compression_method() on the unused
guessed method (if any), and rejecting something that was already
safe to use.
Rationale: When use a guessed compression method, we already gave a
PROTOCOL_WARN when our guess differed from the declared method,
AND we gave a PROTOCOL_WARN when the declared method failed. It is
not a protocol problem that the guessed method failed too; it's just
a recovery attempt that failed.
A cached_dir_t object (for now) is always compressed with
DEFLATE_METHOD, but in handle_get_status_vote() to we were using the
general compression-negotiation code decide what compression to
claim we were using.
This was one of the reasons behind 22502.
Fixes bug 22669; bugfix on 0.3.1.1-alpha
Move the HTTPProxy option to the deprecated list so for now it will only warn
users but feature is still in the code which will be removed in a future
stable version.
Fixes#20575
Signed-off-by: David Goulet <dgoulet@torproject.org>
On an hidden service rendezvous circuit, a BEGIN_DIR could be sent
(maliciously) which would trigger a tor_assert() because
connection_edge_process_relay_cell() thought that the circuit is an
or_circuit_t but is an origin circuit in reality.
Fixes#22494
Reported-by: Roger Dingledine <arma@torproject.org>
Signed-off-by: David Goulet <dgoulet@torproject.org>
This fixes an assertion failure in relay_send_end_cell_from_edge_() when an
origin circuit and a cpath_layer = NULL were passed.
A service rendezvous circuit could do such a thing when a malformed BEGIN cell
is received but shouldn't in the first place because the service needs to send
an END cell on the circuit for which it can not do without a cpath_layer.
Fixes#22493
Reported-by: Roger Dingledine <arma@torproject.org>
Signed-off-by: David Goulet <dgoulet@torproject.org>
Apparently, the unit tests relied on being able to make ed->x509
link certs even when they hadn't set any server flags in the
options. So instead of making "client" mean "never generate an
ed->x509 cert", we'll have it mean "it's okay not to generate an
ed->x509 cert".
(Going with a minimal fix here, since this is supposed to be a
stable version.)
The tests previously assumed that the link handshake code would be
calling get_my_certs() -- when I changed it to call get_own_cert()
instead for the (case 2) 22460 fix, the tests failed, since the tls
connection wasn't really there.
This change makes us start mocking out the tor_tls_get_own_cert()
function too.
It also corrects the behavior of the mock_get_peer_cert() function
-- it should have been returning a newly allocated copy.
It's okay to call add_ed25519_cert with a NULL argument: so,
document that. Also, add a tor_assert_nonfatal() to catch any case
where we have failed to set own_link_cert when conn_in_server_mode.
Whenever we rotate our TLS context, we change our Ed25519
Signing->Link certificate. But if we've already started a TLS
connection, then we've already sent the old X509 link certificate,
so the new Ed25519 Signing->Link certificate won't match it.
To fix this, we now store a copy of the Signing->Link certificate
when we initialize the handshake state, and send that certificate
as part of our CERTS cell.
Fixes one case of bug22460; bugfix on 0.3.0.1-alpha.
Previously we could sometimes change our signing key, but not
regenerate the certificates (signing->link and signing->auth) that
were signed with it. Also, we would regularly replace our TLS x.509
link certificate (by rotating our TLS context) but not replace our
signing->link ed25519 certificate. In both cases, the resulting
inconsistency would make other relays reject our link handshakes.
Fixes two cases of bug 22460; bugfix on 0.3.0.1-alpha.
The encrypted_data_length_is_valid() function wasn't validating correctly the
length of the encrypted data of a v3 descriptor. The side effect of this is
that an HSDir was rejecting the descriptor and ultimately not storing it.
Fixes#22447
Signed-off-by: David Goulet <dgoulet@torproject.org>
A fair number of our mock_impl declarations were messed up so that
even our special AM_ETAGSFLAGS couldn't find them.
This should be a whitespace-only patch.
When directory authorities reject a router descriptor due to keypinning,
free the router descriptor rather than leaking the memory.
Fixes bug 22370; bugfix on 0.2.7.2-alpha.
If we add the element itself, we will later free it when we free the
descriptor, and the next time we go to look at MyFamily, things will
go badly.
Fixes the rest of bug 22368; bugfix on 0.3.1.1-alpha.
If we free them here, we will still attempt to access the freed memory
later on, and also we will double-free when we are freeing the config.
Fixes part of bug 22368.
This patch lifts the return value, rv, variable to the beginning of the
function, adds a 'done' label for clean-up and function exit and makes
the rest of the function use the rv value + goto done; instead of
cleaning up in multiple places.
See: https://bugs.torproject.org/22305
We used to not set the guard state in launch_direct_bridge_descriptor_fetch().
So when a bridge descriptor fetch failed, the guard subsystem would never
learn about the fail (and hence the guard's reachability state would not
be updated).
We used to not set the guard state in launch_direct_bridge_descriptor_fetch().
So when a bridge descriptor fetch failed, the guard subsystem would never
learn about the fail (and hence the guard's reachability state would not
be updated).
Directory authorities now reject relays running versions
0.2.9.1-alpha through 0.2.9.4-alpha, because those relays
suffer from bug 20499 and don't keep their consensus cache
up-to-date.
Resolves ticket 20509.
parse_config_line_from_str_verbose() already looks for strings
that are surrounded by quotes, and processes them with
unescape_string(). So things were getting decoded twice, which was
(in turn) playing havoc with backslashes on Windows.
This adds a couple of configure commands to control whether we're
requiring all dependencies to be available locally (default) or not
(--enable-cargo-online-mode). When building from a tarball, we require
the RUST_DEPENDENCIES variable to point to the local repository of
crates. This also adds src/ext/rust as a git submodule that contains
such a local repository for easy setup.
Passing --enable-cargo-online-mode during configure allows cargo to make
network requests while building Tor or running tests. If this flag is
not supplied, the dependencies need to be available in the form of a
local mirror.
This gives an indication in the log that Tor was built with Rust
support, as well as laying some groundwork for further string-returning
APIs to be converted to Rust
config_get_lines is now split into two functions:
- config_get_lines which is the same as before we had %include
- config_get_lines_include which actually processes %include
Before we've set our options, we can neither call get_options() nor
networkstatus_get_latest_consensus().
Fixes bug 22252; bugfix on 4d9d2553ba
in 0.2.9.3-alpha.
Replace the 177 fallbacks originally introduced in Tor 0.2.9.8 in
December 2016 (of which ~126 were still functional), with a list of
151 fallbacks (32 new, 119 existing, 58 removed) generated in May 2017.
Resolves ticket 21564.
This patch makes us use FALLBACK_COMPRESS_METHOD to try to fetch an
object from the consensus diff manager in case no mutually supported
result was found. This object, if found, is then decompressed using the
spooling system to the client.
See: https://bugs.torproject.org/21667
This patch removes the calls to spooled_resource_new() when trying to
download the consensus. All calls should now be going through the
consdiff manager.
See: https://bugs.torproject.org/21667
This patch ensures that we use the current consensus in the case where
no consensus diff was found or a consensus diff wasn't requested.
See: https://bugs.torproject.org/21667
These still won't do anything till I get the values to be filled in.
Also, I changed the API a little (with corresponding changes in
directory.c) to match things that it's easier to store.
This patch changes handle_get_current_consensus() to make it read the
current consensus document from the consensus caching subsystem.
See: https://bugs.torproject.org/21667
Failure to do this caused an assertion failure with #22246 . This
assertion failure can be triggered remotely, so we're tracking it as
medium-severity TROVE-2017-002.
Closes bug 22245; bugfix on 0.0.9rc1, when bandwidth accounting was
first introduced.
Found by Andrey Karpov and reported at https://www.viva64.com/en/b/0507/
This patch refactors connection_dir_client_reached_eof() to use
compression_method_get_human_name() to set description1 and
description2 variables.
See: https://bugs.torproject.org/21667
One (HeapEnableTerminationOnCorruption) is on-by-default since win8;
the other (PROCESS_DEP_DISABLE_ATL_THUNK_EMULATION) supposedly only
affects ATL, which (we think) we don't use. Still, these are good
hygiene. Closes ticket 21953.
Cleanup logic in test_intro_point_registration() invoked tt_assert()
in a way that could cause it to jump backward into the cleanup code if
the assertion failed, causing Coverity to see a double free (CID
1397192). Move the tt_assert() calls into a helper function having
the well-defined task of testing hs_circuitmap_free_all().
Fixes#22231.
A descriptor only contains the curve25519 public key in the enc-key field so
the private key should not be in that data structure. The service data
structures will have access to the full keypair (#20657).
Furthermore, ticket #21871 has highlighted an issue in the proposal 224 about
the encryption key and legacy key being mutually exclusive. This is very wrong
and this commit fixes the code to follow the change to the proposal of that
ticket.
Signed-off-by: David Goulet <dgoulet@torproject.org>
A for-loop in test_channelpadding_timers() would never run because it
was trying to increment a counter up to CHANNELS_TO_TEST/3 after an
earlier block already incremented it to CHANNELS_TO_TEST/2.
Fixes#22221, CID 1405983.
We do this by treating the presence of .z as meaning ZLIB_METHOD,
even if Accept-Encoding does not include deflate.
This fixes bug 22206; bug not in any released tor.
Nothing was setting or inspecting these fields, and they were marked
as OBSOLETE() in config.c -- but somehow we still had them in the
or_options_t structure. Ouch.
There was a bug that got exposed with the removal of ORListenAddress. Within
server_mode(), we now only check ORPort_set which is set in parse_ports().
However, options_validate() is using server_mode() at the start to check if we
need to look at the uname but then the ORPort_set is unset at that point
because the port parsing was done just after. This commit fixes that.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
The descriptor fields can't be validated properly during encoding because they
are signed by a descriptor signing key that we don't have in the unit test.
Removing the test case for now but ultimately we need an independent
implementation that can encode descriptor and test our decoding functions with
that.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Create the hs_test_helpers.{c|h} files that contains helper functions to
create introduction point, descriptor and compare descriptor.
Used by both the hs cache and hs descriptor tests. Unify them to avoid code
duplication.
Also, this commit fixes the usage of the signing key that was wrongly used
when creating a cross signed certificate.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This change prevents a no-longer-supported behavior where we change
options that would later be written back to torrc with a SAVECONF.
Also, use the "Pointer to final pointer" trick to build the
normalized list, to avoid special-casing the first element.
asan was finding an alignment issue with a cast, so set the field in the
trunnel struct and then encode it instead. Also, enable log capture and
verification.
Checking all of these parameter lists for every single connection every second
seems like it could be an expensive waste.
Updating globally cached versions when there is a new consensus will still
allow us to apply consensus parameter updates to all existing connections
immediately.
IMO, these tests should be calling options_init() to properly set everything
to default values, but when that is done, about a dozen tests fail. Setting
the one default value that broke the tests for my branch. Sorry for being
lame.
Accomplished via the following:
1. Use NETINFO cells to determine if both peers will agree on canonical
status. Prefer connections where they agree to those where they do not.
2. Alter channel_is_better() to prefer older orconns in the case of multiple
canonical connections, and use the orconn with more circuits on it in case
of age ties.
Also perform some hourly accounting on how many of these types of connections
there are and log it at info or notice level.
This unifies CircuitIdleTimeout and PredictedCircsRelevanceTime into a single
option, and randomizes it.
It also gives us control over the default value as well as relay-to-relay
connection lifespan through the consensus.
Conflicts:
src/or/circuituse.c
src/or/config.c
src/or/main.c
src/test/testing_common.c
This defense will cause Cisco, Juniper, Fortinet, and other routers operating
in the default configuration to collapse netflow records that would normally
be split due to the 15 second flow idle timeout.
Collapsing these records should greatly reduce the utility of default netflow
data for correlation attacks, since all client-side records should become 30
minute chunks of total bytes sent/received, rather than creating multiple
separate records for every webpage load/ssh command interaction/XMPP chat/whatever
else happens to be inactive for more than 15 seconds.
The defense adds consensus parameters to govern the range of timeout values
for sending padding packets, as well as for keeping connections open.
The defense only sends padding when connections are otherwise inactive, and it
does not pad connections used solely for directory traffic at all. By default
it also doesn't pad inter-relay connections.
Statistics on the total padding in the last 24 hours are exported to the
extra-info descriptors.
Right now it just sets an if-modified-since header, but it's about
to get even bigger.
This patch avoids changing indentation; the next patch will be
whitespace fixes.
We need to index diffs by the digest-as-signed of their source
consensus, so that we can find them even from consensuses whose
signatures are encoded differently.
In this patch I add support for "delete through end of file" in our
ed diff handler, and generate our diffs so that they remove
everything after in the consensus after the signatures begin.
test_options_validate_impl() incorrectly executed subsequent phases of
config parsing and validation after an expected error. This caused
msg to leak when those later phases (which would likely produce errors
as well) overwrote it.
This was introduced 90562fc23a adding a code
path where we pass a NULL pointer for the HSDir fingerprint to the control
event subsystem. The HS desc failed function wasn't handling properly that
pointer for a NULL value.
Two unit tests are also added in this commit to make sure we handle properly
the case of a NULL hsdir fingerprint and a NULL content as well.
Fixes#22138
Signed-off-by: David Goulet <dgoulet@torproject.org>
Code movement in the commit introducings tests for #22103 uncovered a
latent memory management bug.
Refactor the log message checking from test_options_checkmsgs() into a
helper test_options_checklog(). This avoids a memory leak (and
possible double-free) in a test failure condition.
Don't reuse variables (especially pointers to allocated memory!) for
multiple unrelated purposes.
Fixes CID 1405778.
Also factor out the error message comparisions from
test_options_validate_impl() into a separate function so it can check
for error messages in different phases of config parsing.
config_parse_interval() and config_parse_msec_interval() were checking
whether the variable "ok" (a pointer to an int) was null, rather than
derefencing it. Both functions are static, and all existing callers
pass a valid pointer to those static functions. The callers do check
the variables (also confusingly named "ok") whose addresses they pass
as the "ok" arguments, so even if the pointer check were corrected to
be a dereference, it would be redundant.
Fixes#22103.
This was a >630-line function, which doesn't make anybody happy. It
was also mostly composed of a bunch of if-statements that handled
different directory responses differently depending on the original
purpose of the directory connection. The logical refactoring here
is to move the body of each switch statement into a separate handler
function, and to invoke those functions from a separate switch
statement.
This commit leaves whitespace mostly untouched, for ease of review.
I'll reindent in the next commit.
These required some special-casing, since some of the assumption
about real compression algorithms don't actually hold for the
identity transform. Specifically, we had assumed:
- compression functions typically change the lengths of their
inputs.
- decompression functions can detect truncated inputs
- compression functions have detectable headers
None of those is true for the identity transformation.
This will allow us to treat NO_METHOD as a real compression method,
and to simplify code that currently does
if (compressing) {
compress
} else {
copy
}
Inform the control port with an HS_DESC failed event when the client is unable
to pick an HSDir. It's followed by an empty HS_DESC_CONTENT event. In order to
achieve that, some control port code had to be modified to accept a NULL HSDir
identity digest.
This commit also adds a trigger of a failed event when we are unable to
base64-decode the descriptor cookie.
Fixes#22042
Signed-off-by: David Goulet <dgoulet@torproject.org>
Introduce a way to optionally enable Rust integration for our builds. No
actual Rust code is added yet and specifying the flag has no effect
other than failing the build if rustc and cargo are unavailable.
Increase the maximum allowed size passed to mprotect(PROT_WRITE)
from 1MB to 16MB. This was necessary with the glibc allocator
in order to allow worker threads to allocate more memory --
which in turn is necessary because of our new use of worker
threads for compression.
Closes ticket #22096. Found while working on #21648.
This patch changes two things in our LZMA compression backend:
- We lower the preset values for all `compression_level_t` values to
ensure that we can run the LZMA decoder with less than 65 MB of memory
available. This seems to have a small impact on the real world usage
and fits well with our needs.
- We set the upper bound of memory usage for the LZMA decoder to 16 MB.
See: https://bugs.torproject.org/21665
There were two issues here: first, zstd didn't exhibit the right
behavior unless it got a very large input. That's fine.
The second issue was a genuine bug, fixed by 39cfaba9e2.
This patch refactors our compression tests such that deflate, gzip,
lzma, and zstd are all tested using the same code.
Additionally we use run-time checks to see if the given compression
method is supported instead of using HAVE_LZMA and HAVE_ZSTD.
See: https://bugs.torproject.org/22085
This patch adds support for measuring the approximated memory usage by
the individual `tor_zstd_compress_state_t` object instances.
See: https://bugs.torproject.org/22066
This patch fixes the documentation string for `tor_uncompress()` to
ensure that it does not explicitly mention zlib or gzip since we now
support multiple compression backends.
This patch adds support for measuring the approximated memory usage by
the individual `tor_lzma_compress_state_t` object instances.
The LZMA library provides the functions `lzma_easy_encoder_memusage()`
and `lzma_easy_decoder_memusage()` which is used to find the estimated
usage in bytes.
See: https://bugs.torproject.org/22066
We hadn't needed this before, because most getpid() callers on Linux
were looking at the vDSO version of getpid(). I don't know why at
least one version of OpenSSL seems to be ignoring the vDSO, but this
change should fix it.
Fixes bug 21943; bugfix on 0.2.5.1-alpha when the sandbox was
introduced.
The `tor_compress_state_t` data-type is used as a wrapper around the
more specialized state-types used by the various compression backends.
This patch ensures that the overhead of this "thin" wrapper type is
included in the value returned by `tor_compress_get_total_allocation()`.
See: https://bugs.torproject.org/22066
OS X's ar(1) doesn't allow us to create an archive with no object files.
This patch adds a stub file with a stub function in it to make OS X
happy again.
Since we have a streaming API for each compression backend, we don't
need a non-streaming API for each: we can build a common
non-streaming API at the front-end.
This commit adds the src/trace directory containing the basics for our tracing
subsystem. It is not used in the code base. The "src/trace/debug.h" file
contains an example on how we can map our tor trace events to log_debug().
The tracing subsystem can only be enabled by tracing framework at compile
time. This commit introduces the "--enable-tracing-debug" option that will
make all "tor_trace()" function be maped to "log_debug()".
Closes#13802
Signed-off-by: David Goulet <dgoulet@torproject.org>
That log statement can be triggered if somebody on the Internet behaves badly
which is possible with buggy implementation for instance.
Fixes#21293
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch renames the `compress` parameter of the
`tor_zlib_compress_new()` function to `_compress` to avoid shadowing the
`compress()` function in zlib.h.
This patch splits up `tor_compress_memory_level()` into static functions
in the individual compression backends, which allows us to tune the
values per compression backend rather than globally.
See: https://bugs.torproject.org/21662
Use a switch-statement in `tor_compress()` and `tor_uncompress()` for
the given `compress_method_t` parameter. This allows us to have the
compiler detect if we forgot add a handler in these functions for a
newly added enumeration value.
See: https://bugs.torproject.org/21662
This patch ensures that Tor checks if a given compression method is
supported before printing the version string when calling `tor
--library-versions`.
Additionally, we use the `tor_compress_supports_method()` to check if a
given version is supported for Tor's start-up version string, but here
we print "N/A" if a given compression method is unavailable.
See: https://bugs.torproject.org/21662
This patch adds `tor_compress_version_str()` and
`tor_compress_header_version_str()` to get the version strings of the
different compression schema providers. Both functions returns `NULL` in
case a given `compress_method_t` is unknown or unsupported.
See: https://bugs.torproject.org/21662
This patch adds support for checking if a given `compress_method_t` is
supported by the currently running Tor instance using
`tor_compress_supports_method()`.
See: https://bugs.torproject.org/21662
This patch adds the `tor_compress_get_total_allocation()` which returns
an approximate number of bytes currently in use by all the different
compression backends.
See: https://bugs.torproject.org/21662
This patch adds support for enabling support for Zstandard to our configure
script. By default, the --enable-zstd option is set to "auto" which means if
libzstd is available we'll build Tor with Zstandard support.
See: https://bugs.torproject.org/21662
This patch adds support for enabling support for LZMA to our configure
script. By default, the --enable-lzma option is set to "auto" which
means if liblzma is available we'll build Tor with LZMA support.
See: https://bugs.torproject.org/21662
This patch changes the way `tor_compress_new()`,
`tor_compress_process()`, and `tor_compress_free()` handles different
compression methods. This should give us compiler warnings in case an
additional compression method is added, but the developer forgets to add
handlers in the three aforementioned functions.
See https://bugs.torproject.org/21663
This patch refactors the `torgzip` module to allow us to extend a common
compression API to support multiple compression backends.
Additionally we move the gzip/zlib code into its own module under the
name `compress_zlib`.
See https://bugs.torproject.org/21664
Remove duplicate code that validates a service object which is now in
rend_validate_service().
Add some comments on why we nullify a service in the code path of
rend_config_services().
Signed-off-by: David Goulet <dgoulet@torproject.org>
This new function validates a service object and is used everytime a service
is successfully loaded from the configuration file.
It is currently copying the validation that rend_add_service() also does which
means both functions validate. It will be decoupled in the next commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The item referred to the cdm_ht_set_status() case where the item was
not already in the hashtable. But that already happens naturally
when we scan the directory on startup... and we already have a test
for that.
This commit adds some helper functions to look up the diff from one
consensus and to make sure that applying it leads to another. Then
we add them throughout the existing test cases. Doing this turned
up a reference-leaking bug in consensus_diff_worker_replyfn.
In several places in the old code, we had problems that only an
in-memory index of diff status could solve, including:
* Remembering which diffs were in-progress, so that we didn't
re-launch them.
* Remembering which diffs had failed, so that we didn't try to
recompute them over and over.
* Having a fast way to look up the diff from a given consensus to
the latest consensus of a given flavor.
This patch adds a hashtable mapping from (flavor, source diff), to
solve the problem. It maps to a cache entry handle, rather than to
a cache entry directly, so that it doesn't affect the reference
counts of the cache entries, and so that we don't otherwise need to
worry about lifetime management.
This conscache flag tells conscache that it should munmap the
document as soon as reasonably possible, since its usage pattern is
expected to not have a lot of time-locality.
Initial tests. These just try adding a few consensuses, looking
them up, and making sure that consensus diffs are generated in a
more or less reasonable-looking way. It's enough for 87% coverage,
but it leaves out a lot of functionality.
This module's job is to remember old consensus documents, to
calculate their diffs on demand, and to .
There are some incomplete points in this code; I've marked them with
"XXXX". I intend to fix them in separate commits, since I believe
doing it in separate commits will make the branch easier to review.
The GETINFO extra-info/digest/<digest> broke in commit 568dc27a19 that
refactored the base16_decode() API to return the decoded length.
Unfortunately, that if() condition should have checked for the correct length
instead of an error which broke the command in tor-0.2.9.1-alpha.
Fixes#22034
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit mainly moves the responsibility for directory request
construction one level higher. It also allows a directory request
to contain a pointer to a routerstatus, which will get turned into
the correct contact information at the last minute.
We do dump HS stats now at log info everytime the intro circuit creation retry
period limit has been reached. However, the log was upgraded to warning if we
actually were over the elapsed time (plus an extra slop).
It is actually something that will happen in tor in normal case. For instance,
if the network goes down for 10 minutes then back up again making
have_completed_a_circuit() return false which results in never updating that
retry period marker for a service.
Fixes#22032
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch makes the internal `get_memlevel()` a part of the public
compression API as `tor_compress_memory_level()`.
See https://bugs.torproject.org/21663
This patch refactors our streaming compression code to allow us to
extend it with non-zlib/non-gzip based compression schemas.
See https://bugs.torproject.org/21663
To allow us to use the API name `tor_compress` and `tor_uncompress` as
the main entry-point for all compression/uncompression and not just gzip
and zlib.
See https://bugs.torproject.org/21663
This patch removes the unused `is_gzip_supported()` and changes the
documentation string around the `compress_method_t` enumeration to
explicitly state that both `ZLIB_METHOD` and `GZIP_METHOD` are both
always supported.
Zlib version 1.2.0 was released on the 9'th of March, 2003 according to
their ChangeLog.
See https://bugs.torproject.org/21663
This patch changes some of the tt_assert() usage in test_util_gzip() to
use tt_int_op() to get better error messages upon failure.
Additionally we move to use explicit NULL checks.
See https://bugs.torproject.org/21663
The consdiff generation logic would skip over lines added at the start of the
second file, and generate a diff that it would the immediately refuse because
it couldn't be used to reproduce the second file from the first. Fixes#21996.
The reason for making the temporary list public is to keep it encapsulated in
the rendservice subsystem so the prop224 code does not have direct access to
it and can only affect it through the rendservice pruning function.
It also has been modified to not take list as arguments but rather use the
global lists (main and temporary ones) because prop224 code will call it to
actually prune the rendservice's lists. The function does the needed rotation
of pointers between those lists and then prune if needed.
In order to make the unit test work and not completely horrible, there is a
"impl_" version of the function that doesn't free memory, it simply moves
pointers around. It is directly used in the unit test and two setter functions
for those lists' pointer have been added only for unit test.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now we have separate getters and setters for service-side and relay-side. I
took this approach over adding arguments to the already existing methods to
have more explicit type-checking, and also because some functions would grow
too large and dirty.
This commit also fixes every callsite to use the new function names which
modifies the legacy HS (v2) and the prop224 (v3) code.
Signed-off-by: David Goulet <dgoulet@torproject.org>
One of the goals of this change is to have trunnel API/ABI being more explicit
so we namespace them with "trn_*". Furthermore, we can now create
hs_cells.[ch] without having to confuse it with trunnel which used to be
"hs_cell_*" before that change.
Here are the perl line that were used for this rename:
perl -i -pe 's/cell_extension/trn_cell_extension/g;' src/*/*.[ch]
perl -i -pe 's/cell_extension/trn_cell_extension/g;' src/trunnel/hs/*.trunnel
perl -i -pe 's/hs_cell_/trn_cell_/g;' src/*/*.[ch]
perl -i -pe 's/hs_cell_/trn_cell_/g;' src/trunnel/hs/*.trunnel
And then "./scripts/codegen/run_trunnel.sh" with trunnel commit id
613fb1b98e58504e2b84ef56b1602b6380629043.
Fixes#21919
Signed-off-by: David Goulet <dgoulet@torproject.org>
Pinning EntryNodes along with hidden services can be possibly harmful (for
instance #14917 and #21155) so at the very least warn the operator if this is
the case.
Fixes#21155
Signed-off-by: David Goulet <dgoulet@torproject.org>
These tests tried to use ridiculously large buffer sizes to check
the sanity-checking in the code; but since the sanity-checking
changed, these need to change too.
Now that base64_decode() checks the destination buffer length against
the actual number of bytes as they're produced, shared_random.c no
longer needs the "SR_COMMIT_LEN+2" workaround.
Remove base64_decode_nopad() because it is redundant now that
base64_decode() correctly handles both padded and unpadded base64
encodings with "right-sized" output buffers.
Test base64_decode() with odd sized decoded lengths, including
unpadded encodings and padded encodings with "right-sized" output
buffers. Convert calls to base64_decode_nopad() to base64_decode()
because base64_decode_nopad() is redundant.
base64_decode() was applying an overly conservative check on the
output buffer length that could incorrectly produce an error if the
input encoding contained padding or newlines. Fix this by checking
the output buffer length against the actual decoded length produced
during decoding.
When we "fixed" #18280 in 4e4a7d2b0c
in 0291 it appears that we introduced a bug: The base32_encode
function can read off the end of the input buffer, if the input
buffer size modulo 5 is not equal to 0 or 3.
This is not completely horrible, for two reasons:
* The extra bits that are read are never actually used: so this
is only a crash when asan is enabled, in the worst case. Not a
data leak.
* The input sizes passed to base32_encode are only ever multiples
of 5. They are all either DIGEST_LEN (20), REND_SERVICE_ID_LEN
(10), sizeof(rand_bytes) in addressmap.c (10), or an input in
crypto.c that is forced to a multiple of 5.
So this bug can't actually trigger in today's Tor.
Closes bug 21894; bugfix on 0.2.9.1-alpha.
It looks like 32_encoded_size/64_encode_size APIs are inconsistent
not only in the number of "d"s they have, but also in whether they
count the terminating NUL. Taylor noted this in 86477f4e3f,
but I think we should note the inconsistently more loudly in order
to avoid trouble.
(I ran into trouble with this when writing 30b13fd82e243713c6a0d.)
Note down in the routerstatus_t of a node if the router supports the HSIntro=4
version for the ed25519 authentication key and HSDir=2 version for the v3
descriptor supports.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Some of those defines will be used by the v3 HS protocol so move them to a
common header out of rendservice.c. This is also ground work for prop224
service implementation.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Another building blocks for prop224 service work. This also makes the function
takes specific argument instead of the or_option_t object.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a client tried to connect to an invalid port of an hidden service, a
warning was printed:
[warn] connection_edge_process_relay_cell (at origin) failed.
This is because the connection subsystem wants to close the circuit because
the port can't be found and then returns a negative reason to achieve that.
However, that specific situation triggered a warning. This commit prevents it
for the specific case of an invalid hidden service port.
Fixes#16706
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to avoid src/or/hs_service.o to contain no symbols and thus making
clang throw a warning, the functions are now exposed not just to unit tests.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Check that route_len_for_purpose() (helper for new_route_len())
correctly fails a non-fatal bug assertion if it encounters an
unhandled circuit purpose when it is called with exit node info.
Add a new helper function route_len_for_purpose(), which explicitly
lists all of the known circuit purposes for a circuit with a chosen
exit node (unlike previously, where the default route length for a
chosen exit was DEFAULT_ROUTE_LEN + 1 except for two purposes). Add a
non-fatal assertion for unhandled purposes that conservatively returns
DEFAULT_ROUTE_LEN + 1.
Add copious comments documenting which circuits need an extra hop and
why.
Thanks to nickm and dgoulet for providing background information.
This change makes it so those those APIs will not require prior
inclusion of openssl headers. I've left some APIs alone-- those
will change to be extra-private.
The old implementation had duplicated code in a bunch of places, and
it interspersed spool-management with resource management. The new
implementation should make it easier to add new resource types and
maintain the spooling code.
Closing ticket 21651.
When calculating max sampled size, Tor would only count the number of
bridges in torrc, without considering that our state file might already
have sampled bridges in it. This caused problems when people swap
bridges, since the following error would trigger:
[warn] Not expanding the guard sample any further; just hit the
maximum sample threshold of 1
This patch changes the way we decide when to check for whether it's time
to rotate and/or expiry our onion keys. Due to proposal #274 we can now
have the keys rotate at different frequencies than before and we thus
do the check once an hour when our Tor daemon is running in server mode.
This should allow us to quickly notice if the network consensus
parameter have changed while we are running instead of having to wait
until the current parameters timeout value have passed.
See: See: https://bugs.torproject.org/21641
This patch adds a new timer that is executed when it is time to expire
our current set of old onion keys. Because of proposal #274 this can no
longer be assumed to be at the same time we rotate our onion keys since
they will be updated less frequently.
See: https://bugs.torproject.org/21641
This patch adds an API to get the current grace period, in days, defined
as the consensus parameter "onion-key-grace-period-days".
As per proposal #274 the values for "onion-key-grace-period-days" is a
default value of 7 days, a minimum value of 1 day, and a maximum value
defined by other consensus parameter "onion-key-rotation-days" also
defined in days.
See: https://bugs.torproject.org/21641
This patch turns `MIN_ONION_KEY_LIFETIME` into a new function
`get_onion_key_lifetime()` which gets its value from a network consensus
parameter named "onion-key-rotation-days". This allows us to tune the
value at a later point in time with no code modifications.
We also bump the default onion key lifetime from 7 to 28 days as per
proposal #274.
See: https://bugs.torproject.org/21641
This patch fixes a regression described in bug #21757 that first
appeared after commit 6e78ede73f which was an attempt to fix bug #21654.
When switching from buffered I/O to direct file descriptor I/O our
output strings from get_string_from_pipe() might contain newline
characters (\n). In this patch we modify tor_get_lines_from_handle() to
ensure that the function splits the newly read string at the newline
character and thus might return multiple lines from a single call to
get_string_from_pipe().
Additionally, we add a test case to test_util_string_from_pipe() to
ensure that get_string_from_pipe() correctly returns multiple lines in a
single call.
See: https://bugs.torproject.org/21757
See: https://bugs.torproject.org/21654
We could use one of these for holding "junk" descriptors and
unparseable things -- but we'll _need_ it for having cached
consensuses and diffs between them.
There was a frequent block of code that did "find the next router
line, see if we've hit the end of the list, get the ID hash from the
line, and enforce well-ordering." Per Ahf's review, I'm extracting
it to its own function.
Previously, we operated on smartlists of NUL-terminated strings,
which required us to copy both inputs to produce the NUL-terminated
strings. Then we copied parts of _those_ inputs to produce an
output smartlist of NUL-terminated strings. And finally, we
concatenated everything into a final resulting string.
This implementation, instead, uses a pointer-and-extent pattern to
represent each line as a pointer into the original inputs and a
length. These line objects are then added by reference into the
output. No actual bytes are copied from the original strings until
we finally concatenate the final result together.
Bookkeeping structures and newly allocated strings (like ed
commands) are allocated inside a memarea, to avoid needless mallocs
or complicated should-I-free-this-or-not bookkeeping.
In my measurements, this improves CPU performance by something like
18%. The memory savings should be much, much higher.
This takes two fuzzers: one which generates a diff and makes sure it
works, and one which applies a diff.
So far, they won't crash, but there's a bug in my
string-manipulation code someplace that I'm having to work around,
related to the case where you have a blank line at the end of a
file, or where you diff a file with itself.
Also, add very strict split/join functions, and totally forbid
nonempty files that end with somethig besides a newline. This
change is necessary to ensure that diff/apply are actually reliable
inverse operations.
The 2-line diff changs is needed to make the unit tests actually
test the cases that they thought they were testing.
The bogus free was found while testing those cases
(This commit was extracted by nickm based on the final outcome of
the project, taking only the changes in the files touched by this
commit from the consdiff_rebased branch. The directory-system
changes are going to get worked on separately.)
Windows doesn't let you check the socket error for a socket with
WSAGetLastError() and getsockopt(SO_ERROR). But
getsockopt(SO_ERROR) clears the error on the socket, so you can't
call it more than once per error.
When we introduced recv_ni to help drain alert sockets, back in
0.2.6.3-alpha, we had the failure path for recv_ni call getsockopt()
twice, though: once to check for EINTR and one to check for EAGAIN.
Of course, we never got the eagain, so we treated it as an error,
and warned about: "No error".
The fix here is to have these functions return -errno on failure.
Fixes bug 21540; bugfix on 0.2.6.3-alpha.
The 64-bit load and store code was generating pretty bad output with
my compiler, so I extracted the code from csiphash and used that instead.
Close ticket 21737
So we require that SMARTLIST_FOREACH_END() have the name of the loop
variable in it. But right now the only enforcement for that is to
clear the variable at the end of the loop, which is really not
sufficient: I spent 45 minutes earlier today debugging an issue
where I had said:
SMARTLIST_FOREACH_BEGIN(spool, spooled_resource_t *, spooled) {
...
} SMARTLIST_FOREACH_END(spool);
This patch makes it so that ONLY loop variables can be used, by
referring to the _sl_idx variable.
Also, relaxed the checks of encrypted_data_length_is_valid() since now
only one encrypted section has padding requirements and we don't
actually care to check that all the padding is there.
Consider starting code review from function encode_superencrypted_data().
- Refactor our HS desc crypto funcs to be able to differentiate between
the superencrypted layer and the encrypted layer so that different
crypto constants and padding is used in each layer.
- Introduce some string constants.
- Add some comments.
As part of the work for proposal #274 we are going to remove the need
for MIN_ONION_KEY_LIFETIME and turn it into a dynamic value defined by a
consensus parameter.
See: https://bugs.torproject.org/21641
The bridges+ipv6-min integration test has a client with bridges:
Bridge 127.0.0.1:5003
Bridge [::1]:5003
which got stuck in guard_selection_have_enough_dir_info_to_build_circuits()
because it couldn't find the descriptor of both bridges.
Specifically, the guard_has_descriptor() function could not find the
node_t of the [::1] bridge, because the [::1] bridge had no identity
digest assigned to it.
After further examination, it seems that during fetching the descriptor
for our bridges, we used the CERTS cell to fill the identity digest of
127.0.0.1:5003 properly. However, when we received a CERTS cell from
[::1]:5003 we actually ignored its identity digest because the
learned_router_identity() function was using
get_configured_bridge_by_addr_port_digest() which was returning the
127.0.0.1 bridge instead of the [::1] bridge (because it prioritizes
digest matching over addrport matching).
The fix replaces get_configured_bridge_by_addr_port_digest() with the
recent get_configured_bridge_by_exact_addr_port_digest() function. It
also relaxes the constraints of the
get_configured_bridge_by_exact_addr_port_digest() function by making it
return bridges whose identity digest is not yet known.
By using the _exact_() function, learned_router_identity() actually
fills in the identity digest of the [::1] bridge, which then allows
guard_has_descriptor() to find the right node_t and verify that the
descriptor is there.
FWIW, in the bridges+ipv6-min test both 127.0.0.1 and [::1] bridges
correspond to the same node_t, which I guess makes sense given that it's
actually the same underlying bridge.
This patch removes the `tor_fgets()` wrapper around `fgets(3)` since it
is no longer needed. The function was created due to inconsistency
between the returned values of `fgets(3)` on different versions of Unix
when using `fgets(3)` on non-blocking file descriptors, but with the
recent changes in bug #21654 we switch from unbuffered to direct I/O on
non-blocking file descriptors in our utility module.
We continue to use `fgets(3)` directly in the geoip and dirserv module
since this usage is considered safe.
This patch also removes the test-case that was created to detect
differences in the implementation of `fgets(3)` as well as the changes
file since these changes was not included in any releases yet.
See: https://bugs.torproject.org/21654
This patch changes a number of read loops in the util module to use
less-than comparison instead of not-equal-to comparison. We do this in
the case that we have a bug elsewhere that might cause `numread` to
become larger than `count` and thus become an infinite loop.
This patch removes the buffered I/O stream usage in process_handle_t and
its related utility functions. This simplifies the code and avoids racy
code where we used buffered I/O on non-blocking file descriptors.
See: https://bugs.torproject.org/21654
This patch modifies `tor_read_all_handle()` to use read(2) instead of
fgets(3) when reading the stdout from the child process. This should
eliminate the race condition that can be triggered in the 'slow/util/*'
tests on slower machines running OpenBSD, FreeBSD and HardenedBSD.
See: https://bugs.torproject.org/21654
Make hidden services with 8 to 10 introduction points check for failed
circuits immediately after startup. Previously, they would wait for 5
minutes before performing their first checks.
Fixes bug 21594; bugfix on commit 190aac0eab in Tor 0.2.3.9-alpha.
Reported by alecmuffett.
This change is the only one necessary to allow future versions of
the microdescriptor consensus to replace every 'published' date with
e.g. 2038-01-01 00:00:00; this will save 50-75% in compressed
microdescriptor diff size, which is quite significant.
This commit is a minimal change for 0.2.9; future series will
reduce the use of the 'published' date even more.
Implements part of ticket 21642; implements part of proposal 275.
Previously, they would stop checking when they exceeded their intro point
creation limit.
Fixes bug 21596; bugfix on commit d67bf8b2f2 in Tor 0.2.7.2-alpha.
Reported by alecmuffett.
Previously, they would stop checking when they exceeded their intro point
creation limit.
Fixes bug 21596; bugfix on commit d67bf8b2f2 in Tor 0.2.7.2-alpha.
Reported by alecmuffett.
This patch resets `buf` in test_util_fgets_eagain() after each succesful
ivocation to avoid stray artifacts left in the buffer by erroneous
tor_fgets() calls.
This patch adds the `tor_fgets()` function to our compatibility layer.
`tor_fgets()` adds an additional check for whether the error-bit have
been enabled for the given file stream, if that is the case and `errno`
is set to `EAGAIN` we make sure that we always return NULL.
Unfortunately `fgets(3)` behaves differently on different versions of
the C library.
See: https://bugs.torproject.org/21416
See: https://bugs.torproject.org/20988
