Our other tests tested state lengths against padding packets, and token counts
against non-padding packets. This test checks state lengths against
non-padding packets (and also padding packets too), and checks token counts
against padding packets (and also non-padding packets too).
The next three commits are needed to make this test pass (it found 3 bugs).
Yay?
Since the reproducible RNG dumps its own seed, we don't need to do
it for it. Since tinytest can tell us if the test failed, we don't
need our own test_failed booleans.
This commit moves code that updates the state length and padding limit counts
out from the callback to its own function, for clarity.
It does not change functionality.
This commit moves the padding state limit checks and the padding rate limit
checks out of the token removal codepath, and causes all three functions to
get called from a single circpad_machine_count_nonpadding_sent() function.
It does not change functionality.
The code flow in theory can end up with a layer_hint to be NULL but in
practice it should never happen because with an origin circuit, we must have
the layer_hint.
Just in case, BUG() on it if we ever end up in this situation and recover by
closing the circuit.
Fixes#30467.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Fortunately, in 0.3.5.1-alpha we improved logging for various
failure cases involved with onion service client auth.
Unfortunately, for this one, we freed the file right before logging
its name.
Fortunately, tor_free() sets its pointer to NULL, so we didn't have
a use-after-free bug.
Unfortunately, passing NULL to %s is not defined.
Fortunately, GCC 9.1.1 caught the issue!
Unfortunately, nobody has actually tried building Tor with GCC 9.1.1
before. Or if they had, they didn't report the warning.
Fixes bug 30475; bugfix on 0.3.5.1-alpha.
The INTRODUCE1 trunnel definition file doesn't support that value so it can
not be used else it leads to an assert on the intro point side if ever tried.
Fortunately, it was impossible to reach that code path.
Part of #30454
Signed-off-by: David Goulet <dgoulet@torproject.org>
See proposal 289 section 4.3 for more details.
It describes the flow control protocol at the circuit and stream level. If
there is no FlowCtrl protocol version, tor supports the unauthenticated flow
control features from its supported Relay protocols.
At this commit, relay will start advertising FlowCtrl=1 meaning they support
authenticated SENDMEs v1.
Closes#30363
Signed-off-by: David Goulet <dgoulet@torproject.org>
- Move test-only cpath_get_n_hops() to crypt_path.c.
- Move onion_next_hop_in_cpath() and rename to cpath_get_next_non_open_hop().
The latter function was directly accessing cpath->state, and it's a first step
at hiding ->state.
Some of these functions are now public and cpath-specific so their name should
signify the fact they are part of the cpath module:
assert_cpath_layer_ok -> cpath_assert_layer_ok
assert_cpath_ok -> cpath_assert_ok
onion_append_hop -> cpath_append_hop
circuit_init_cpath_crypto -> cpath_init_circuit_crypto
circuit_free_cpath_node -> cpath_free
onion_append_to_cpath -> cpath_extend_linked_list
Now that we are using a constructor we should be more careful that we are
always using the constructor to initialize crypt_path_t, so make sure that
->private is initialized.
We are using an opaque pointer so the structure needs to be allocated on the
heap. This means we now need a constructor for crypt_path_t.
Also modify all places initializing a crypt_path_t to use the constructor.
For various reasons, this was a nontrivial movement. There are
several places in the code where we do something like "update the
flags on this routerstatus or node if we're an authority", and at
least one where we pretended to be an authority when we weren't.
I don't believe any of these represent a real timing vulnerability
(remote timing against memcmp() on a modern CPU is not easy), but
these are the ones where I believe we should be more careful.
For memeq and friends, "tor_" indicates constant-time and "fast_"
indicates optimized. I'm fine with leaving the constant-time
"safe_mem_is_zero" with its current name, but the "tor_" prefix on
the current optimized version is misleading.
Also, make the tor_digest*_is_zero() uniformly constant-time, and
add a fast_digest*_is_zero() version to use as needed.
A later commit in this branch will fix all the users of
tor_mem_is_zero().
Closes ticket 30309.
Manually fix up some reply-generating code that the Coccinelle scripts
won't match. Some more complicated ones remain -- these are mostly
ones that accumulate data to send, and then call connection_buf_add()
or connection_write_str_to_buf() directly.
Create a set of abstractions for controller commands and events to
output replies to the control channel. The control protocol has a
relatively consistent SMTP-like structure, so it's helpful when code
that implements control commands and events doesn't explicitly format
everything on its own.
Split the core reply formatting code out of control_fmt.c into
control_proto.c. The remaining code in control_format.c deals with
specific subsystems and will eventually move to join those subsystems.
When we tell the periodic event manager about an event, we are
"registering" that event. The event sits around without being
usable, however, until we "connect" the event to libevent. In the
end, we "disconnect" the event and remove its libevent parts.
Previously, we called these operations "add", "setup", and
"destroy", which led to confusion.
We need a little refactoring for this to work, since the
initialization code for the periodic events assumes that libevent is
already initialized, which it can't be until it's configured.
This change, combined with the previous ones, lets other subsystems
declare their own periodic events, without mainloop.c having to know
about them. Implements ticket 30293.
Because this function is poking within the relay_crypto_t object, move the
function to the module so we can keep it opaque as much as possible.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
We add random padding to every cell if there is room. This commit not only
fixes how we compute that random padding length/offset but also improves its
safety with helper functions and a unit test.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
We'll use it this in order to know when to hash the cell for the SENDME
instead of doing it at every cell.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
When adding random to a cell, skip the first 4 bytes and leave them zeroed. It
has been very useful in the past for us to keep bytes like this.
Some code trickery was added to make sure we have enough room for this 4 bytes
offset when adding random.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
The digest object is as large as the entire internal digest object's state,
which is often much larger than the actual set of bytes you're transmitting.
This commit makes it that we keep the digest itself which is 20 bytes.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
No behavior change but code had to be refactored a bit. Also, the tor_memcmp()
was changed to tor_memneq().
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
The circuit and stream level functions that update the package window have
been renamed to have a "_note_" in them to make their purpose more clear.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
No behavior change. Only moving code and fixing part of it in order to use the
parameters passed as pointers.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
To achieve such, this commit also changes the trunnel declaration to use a
union instead of a seperate object for the v1 data.
A constant is added for the digest length so we can use it within the SENDME
code giving us a single reference.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to do so, depending on where the cell is going, we'll keep the last
cell digest that is either received inbound or sent outbound.
Then it can be used for validation.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now that we keep the last seen cell digests on the Exit side on the circuit
object, use that to match the SENDME v1 transforming this whole process into a
real authenticated SENDME mechanism.
Part of #26841
Signed-off-by: David Goulet <dgoulet@torproject.org>
This makes tor remember the last seen digest of a cell if that cell is the
last one before a SENDME on the Exit side.
Closes#26839
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit makes tor able to parse and handle a SENDME version 1. It will
look at the consensus parameter "sendme_accept_min_version" to know what is
the minimum version it should look at.
IMPORTANT: At this commit, the validation of the cell is not fully
implemented. For this, we need #26839 to be completed that is to match the
SENDME digest with the last cell digest.
Closes#26841
Signed-off-by: David Goulet <dgoulet@torproject.org>
This code will obey the consensus parameter "sendme_emit_min_version" to know
which SENDME version it should send. For now, the default is 0 and the
parameter is not yet used in the consensus.
This commit adds the support to send version 1 SENDMEs but aren't sent on the
wire at this commit.
Closes#26840
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to be able to deploy the authenticated SENDMEs, these two consensus
parameters are needed to control the minimum version that we can emit and
accept.
See section 4 in prop289 for more details.
Note that at this commit, the functions that return the values aren't used so
compilation fails if warnings are set to errors.
Closes#26842
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previously, we would only close the stream when our deliver window was
negative at the circuit-level but _not_ at the stream-level when receiving a
DATA cell.
This commit adds an helper function connection_edge_end_close() which
sends an END and then mark the stream for close for a given reason.
That function is now used both in case the deliver window goes below zero for
both circuit and stream level.
Part of #26840
Signed-off-by: David Goulet <dgoulet@torproject.org>
When we are about to send a DATA cell, we have to decrement the package window
for both the circuit and stream level.
This commit adds helper functions to handle the package window decrement.
Part of #26288
Signed-off-by: David Goulet <dgoulet@torproject.org>
When we get a relay DATA cell delivered, we have to decrement the deliver
window on both the circuit and stream level.
This commit adds helper functions to handle the deliver window decrement.
Part of #26840
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is a bit of a complicated commit. It moves code but also refactors part
of it. No behavior change, the idea is to split things up so we can better
handle and understand how SENDME cells are processed where ultimately it will
be easier to handle authenticated SENDMEs (prop289) using the intermediate
functions added in this commit.
The entry point for the cell arriving at the edge (Client or Exit), is
connection_edge_process_relay_cell() for which we look if it is a circuit or
stream level SENDME. This commit refactors that part where two new functions
are introduced to process each of the SENDME types.
The sendme_process_circuit_level() has basically two code paths. If we are a
Client (the circuit is origin) or we are an Exit. Depending on which, the
package window is updated accordingly. Then finally, we resume the reading on
every edge streams on the circuit.
The sendme_process_stream_level() applies on the edge connection which will
update the package window if needed and then will try to empty the inbuf if
need be because we can now deliver more cells.
Again, no behavior change but in order to split that code properly into their
own functions and outside the relay.c file, code modification was needed.
Part of #26840.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Take apart the SENDME cell specific code and put it in sendme.{c|h}. This is
part of prop289 that implements authenticated SENDMEs.
Creating those new files allow for the already huge relay.c to not grow in LOC
and makes it easier to handle and test the SENDME cells in an isolated way.
This commit only moves code. No behavior change.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The nodelist_idx for each node_t serves as a unique identifier for
the node, so we can use a bitarray to hold all the excluded
nodes, and then remove them from the smartlist.
Previously use used smartlist_subtract(sl, excluded), which is
O(len(sl)*len(excluded)).
We can use this function in other places too, but this is the one
that showed up on the profiles of 30291.
Closes ticket 30307.
This command does not fit perfectly with the others, since its
second argument is optional and may contain equal signs. Still,
it's probably better to squeeze it into the new metaformat, since
doing so allows us to remove several pieces of the old
command-parsing machinery.
The two options are mutually exclusive, since otherwise an entry
like "Foo" would be ambiguous. We want to have the ability to treat
entries like this as keys, though, since some controller commands
interpret them as flags.
(This should be all of the command that work nicely with positional
arguments only.)
Some of these commands should probably treat extra arguments as
incorrect, but for now I'm trying to be careful not to break
any existing users.
The first line break in particular was mishandled: it was discarded
if no arguments came before it, which made it impossible to
distinguish arguments from the first line of the body.
To solve this, we need to allocate a copy of the command rather than
using NUL to separate it, since we might have "COMMAND\n" as our input.
Fixes ticket 29984.
There _is_ an underlying logic to these commands, but it isn't
wholly uniform, given years of tweaks and changes. Fortunately I
think there is a superset that will work.
This commit adds a parser for some of the most basic cases -- the
ones currently handled by getargs_helper() and some of the
object-taking ones. Soon will come initial tests; then I'll start using
the parser.
After that, I'll expand the parser to handle the other cases that come
up in the controller protocol.
We have checks in various places in mainlook.c to make sure that
events are initialized before we invoke any periodic_foo() functions
on them. But now that each subsystem will own its own periodic
events, it will be cleaner if we don't assume that they are all
setup or not.
The end goal here is to move the periodic callback to their
respective modules, so that mainloop.c doesn't have to include so
many other things.
This patch doesn't actually move any of the callbacks out of
mainloop.c yet.
In this patch we lower the log level of the failures for the three calls
to unlink() in networkstatus_set_current_consensus(). These errors might
trigger on Windows because the memory mapped consensus file keeps the
file in open state even after we have close()'d it. Windows will then
error on the unlink() call with a "Permission denied" error.
The consequences of ignoring these errors is that we leave an unused
file around on the file-system, which is an easier way to fix this
problem right now than refactoring networkstatus_set_current_consensus().
See: https://bugs.torproject.org/29930
In "make test-network-all", test IPv6-only v3 single onion services,
using the chutney network single-onion-v23-ipv6-md. This test will
not pass until 23588 has been merged.
Closes ticket 27251.
Disable padding via limit check and machine condition. Limits cause us to stop
sending padding. Machine conditions cause the machines to be shut down, and
not restarted.
In 0.3.4 and later, these functions are declared in rephist.h:
STATIC uint64_t find_largest_max(bw_array_t *b);
STATIC void commit_max(bw_array_t *b);
STATIC void advance_obs(bw_array_t *b);
But in 0.2.9, they are declared in rephist.c and test_relay.c.
So compilers fail with a "must use 'struct' tag" error.
We add the missing struct typedef in test_relay.c, to match the
declarations in rephist.c.
(Merge commit 813019cc57 moves these functions into rephist.h instead.)
Fixes bug 30184; not in any released version of Tor.
When releasing OpenSSL patch-level maintenance updates,
we do not want to rebuild binaries using it.
And since they guarantee ABI stability, we do not have to.
Without this patch, warning messages were produced
that confused users:
https://bugzilla.opensuse.org/show_bug.cgi?id=1129411
Fixes bug 30190; bugfix on 0.2.4.2-alpha commit 7607ad2bec
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
In 0.3.4 and later, we declare write_array as:
extern struct bw_array_t *write_array;
...
typedef struct bw_array_t bw_array_t;
But in 0.2.9, we declare write_array as:
typedef struct bw_array_t bw_array_t;
extern bw_array_t *write_array;
And then again in rephist.c:
typedef struct bw_array_t bw_array_t;
So some compilers fail with a duplicate declaration error.
We backport 684b396ce5, which removes the duplicate declaration.
And this commit deals with the undeclared type error.
Backports a single line from merge commit 813019cc57.
Fixes bug 30184; not in any released version of Tor.
We need to encode here instead of doing escaped(), since fwict
escaped() does not currently handle NUL bytes.
Also, use warn_if_nul_found in more cases to avoid duplication.
The smartlist functions take great care to reset unused pointers inside
the smartlist memory to NULL.
The function smartlist_remove_keeporder does not clear memory in such
way when elements have been removed. Therefore call memset after the
for-loop that removes elements. If no element is removed, it is
effectively a no-op.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
The smartlist code takes great care to set all unused pointers inside
the smartlist memory to NULL. Check if this is also the case after
modifying the smartlist multiple times.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Previously, our use of abort() would break anywhere that we didn't
include stdlib.h. This was especially troublesome in case where
tor_assert_nonfatal() was used with ALL_BUGS_ARE_FATAL, since that
one seldom gets tested.
As an alternative, we could have just made this header include
stdlib.h. But that seems bloaty.
Fixes bug 30189; bugfix on 0.3.4.1-alpha.
Coverity doesn't like to see a path where we test a pointer for
NULL if we have already ready dereferenced the pointer on that
path. While in this case, the check is not needed, it's best not to
remove checks from the unit tests IMO. Instead, I'm adding an
earlier check, so that coverity, when analyzing this function, will
think that we have always checked the pointer before dereferencing
it.
Closes ticket 30180; CID 1444641.
Use a table-based lookup to find the right command handler. This
will serve as the basement for several future improvements, as we
improve the API for parsing commands.
This should please coverity, and fix CID 1415721. It didn't
understand that networkstatus_get_param() always returns a value
between its minimum and maximum values.
This should please coverity, and fix CID 1415722. It didn't
understand that networkstatus_get_param() always returns a value
between its minimum and maximum values.
This should please coverity, and fix CID 1415723. It didn't understand
that networkstatus_get_param() always returns a value between its
minimum and maximum values.
The logic here should be "use versions or free it". The "free it"
part was previously in a kind of obfuscated place, so coverity
wasn't sure it was invoked as appropriate. CID 1437436.
The function compat_getdelim_ is used for tor_getline if tor is compiled
on a system that lacks getline and getdelim. These systems should be
very rare, considering that getdelim is POSIX.
If this system is further a 32 bit architecture, it is possible to
trigger a double free with huge files.
If bufsiz has been already increased to 2 GB, the next chunk would
be 4 GB in size, which wraps around to 0 due to 32 bit limitations.
A realloc(*buf, 0) could be imagined as "free(*buf); return malloc(0);"
which therefore could return NULL. The code in question considers
that an error, but will keep the value of *buf pointing to already
freed memory.
The caller of tor_getline() would free the pointer again, therefore
leading to a double free.
This code can only be triggered in dirserv_read_measured_bandwidths
with a huge measured bandwith list file on a system that actually
allows to reach 2 GB of space through realloc.
It is not possible to trigger this on Linux with glibc or other major
*BSD systems even on unit tests, because these systems cannot reach
so much memory due to memory fragmentation.
This patch is effectively based on the penetration test report of
cure53 for curl available at https://cure53.de/pentest-report_curl.pdf
and explained under section "CRL-01-007 Double-free in aprintf() via
unsafe size_t multiplication (Medium)".
If the concatenation of connection buffer and the buffer of linked
connection exceeds INT_MAX bytes, then buf_move_to_buf returns -1 as an
error value.
This value is currently casted to size_t (variable n_read) and will
erroneously lead to an increasement of variable "max_to_read".
This in turn can be used to call connection_buf_read_from_socket to
store more data inside the buffer than expected and clogging the
connection buffer.
If the linked connection buffer was able to overflow INT_MAX, the call
of buf_move_to_buf would have previously internally triggered an integer
overflow, corrupting the state of the connection buffer.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Many buffer functions have a hard limit of INT_MAX for datalen, but
this limitation is not enforced in all functions:
- buf_move_all may exceed that limit with too many chunks
- buf_move_to_buf exceeds that limit with invalid buf_flushlen argument
- buf_new_with_data may exceed that limit (unit tests only)
This patch adds some annotations in some buf_pos_t functions to
guarantee that no out of boundary access could occur even if another
function lacks safe guards against datalen overflows.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
If the concatenation of connection buffer and the buffer of linked
connection exceeds INT_MAX bytes, then buf_move_to_buf returns -1 as an
error value.
This value is currently casted to size_t (variable n_read) and will
erroneously lead to an increasement of variable "max_to_read".
This in turn can be used to call connection_buf_read_from_socket to
store more data inside the buffer than expected and clogging the
connection buffer.
If the linked connection buffer was able to overflow INT_MAX, the call
of buf_move_to_buf would have previously internally triggered an integer
overflow, corrupting the state of the connection buffer.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Many buffer functions have a hard limit of INT_MAX for datalen, but
this limitation is not enforced in all functions:
- buf_move_all may exceed that limit with too many chunks
- buf_move_to_buf exceeds that limit with invalid buf_flushlen argument
- buf_new_with_data may exceed that limit (unit tests only)
This patch adds some annotations in some buf_pos_t functions to
guarantee that no out of boundary access could occur even if another
function lacks safe guards against datalen overflows.
[This is a backport of the submitted patch to 0.2.9, where the
buf_move_to_buf and buf_new_with_data functions did not exist.]
Fixes bug 29922; bugfix on 0.2.9.3-alpha when we tried to capture
all these warnings. No need to backport any farther than 0.3.5,
though -- these warnings don't cause test failures before then.
This one was tricky to find because apparently it only happened on
_some_ windows builds.
In current NSS versions, these ciphersuites don't work with
SSL_ExportKeyingMaterial(), which was causing relays to fail when
they tried to negotiate the v3 link protocol authentication.
Fixes bug 29241; bugfix on 0.4.0.1-alpha.
And fix the documentation on the function: it does produce trailing
"="s as padding.
Also remove all checks for the return value, which were redundant anyway,
because the function never failed.
Part of 29660.
... and ed25519_public_to_base64(). Also remove all checks for the return
values, which were redundant anyway, because the functions never failed.
Part of 29960.
This test was disabled in 0.4.0 and later, but the fix in #29298 was only
merged to 0.4.1. So this test will never be re-enabled in 0.4.0.
Part of 29500.
Our monotime mocking forces us to call monotime_init() *before* we set the
mocked time value. monotime_init() thus stores the first ratchet value at
whatever the platform is at, and then we set fake mocked time to some later
value.
If monotime_init() gets a value from the host that is greater than what we
choose to mock time at for our unittests, all subsequent monotime_abosolute()
calls return zero, which breaks all unittests that depend on time moving
forward by updating mocked monotime values.
So, we need to adjust our mocked time to take the weird monotime_init() time
into account, when we set fake time.
getpid() can be really expensive sometimes, and it can fail to
detect some kind of fork+prng mistakes, so we need to avoid it if
it's safe to do so.
This patch might slow down fast_prng a lot on any old operating
system that lacks a way to prevent ram from being inherited, AND
requires a syscall for any getpid() calls. But it should make sure
that we either crash or continue safely on incorrect fork+prng usage
elsewhere in the future.
When classifying a client's selection of TLS ciphers, if the client
ciphers are not yet available, do not cache the result. Previously,
we had cached the unavailability of the cipher list and never looked
again, which in turn led us to assume that the client only supported
the ancient V1 link protocol. This, in turn, was causing Stem
integration tests to stall in some cases. Fixes bug 30021; bugfix
on 0.2.4.8-alpha.
When we fixed 28614, our answer was "if we failed to load the
consensus on windows and it had a CRLF, retry it." But we logged
the failure at "warn", and we only logged the retry at "info".
Now we log the retry at "notice", with more useful information.
Fixes bug 30004.
This is just in case there is some rogue platform that uses a
nonstandard value for SEEK_*, and does not define that macro in
unistd.h. I think that's unlikely, but it's conceivable.
Previously we used time(NULL) to set the Expires: header in our HTTP
responses. This made the actual contents of that header untestable,
since the unit tests have no good way to override time(), or to see
what time() was at the exact moment of the call to time() in
dircache.c.
This gave us a race in dir_handle_get/status_vote_next_bandwidth,
where the time() call in dircache.c got one value, and the call in
the tests got another value.
I'm applying our regular solution here: using approx_time() so that
the value stays the same between the code and the test. Since
approx_time() is updated on every event callback, we shouldn't be
losing any accuracy here.
Fixes bug 30001. Bug introduced in fb4a40c32c4a7e5; not in any
released Tor.
In 9c132a5f9e we replaced "buf" with a pointer and replaced
one instance of snprintf with asprintf -- but there was still one
snprintf left over, being crashy.
Fixes bug 29967; bug not in any released Tor. This is CID 1444262.
This can't actually result in a null pointer dereference, since
pub_excl and sub_excl are only set when the corresponding smartlists
are nonempty. But coverity isn't smart enough to figure that out,
and we shouldn't really be depending on it.
Bug 29938; CID 1444257. Bug not in any released Tor.
Having the numbers in those messages makes some of the unit test
unstable, by causing them to depend on the initialization order of
the naming objects.
Based on patches and review comments by Riastradh and Catalyst.
Co-authored-by: Taylor R Campbell <campbell+tor@mumble.net>
Co-authored-by: Taylor Yu <catalyst@torproject.org>
When a directory authority is using a bandwidth file to obtain the
bandwidth values that will be included in the next vote, serve this
bandwidth file at /tor/status-vote/next/bandwidth.z.
Let's use the same function exit point for BUG() codepath that we're using
for every other exit condition. That way, we're not forgetting to clean up
the memarea.
Previously, I had used integers encoded as pointers. This
introduced a flaw: NULL represented both the integer zero, and the
absence of a setting. This in turn made the checks in
cfg_msg_set_{type,chan}() not actually check for an altered value if
the previous value had been set to zero.
Also, I had previously kept a pointer to a dispatch_fypefns_t rather
than making a copy of it. This meant that if the dispatch_typefns_t
were changed between defining the typefns and creating the
dispatcher, we'd get the modified version.
Found while investigating coverage in pubsub_add_{pub,sub}_()
This is necessary to get the number of includes in main.c back under
control. (In the future, we could just use the subsystem manager for
this kind of stuff.)
We want the DISPATCH_ADD_PUB() macro to count as making a
DECLARE_PUBLISH() invocation "used", so let's try a new approach
that preserves that idea. The old one apparently did not work for
some versions of osx clang.
This code tries to prevent a large number of possible errors by
enforcing different restrictions on the messages that different
modules publish and subscribe to.
Some of these rules are probably too strict, and some too lax: we
should feel free to change them as needed as we move forward and
learn more.
This "publish/subscribe" layer sits on top of lib/dispatch, and
tries to provide more type-safety and cross-checking for the
lower-level layer.
Even with this commit, we're still not done: more checking will come
in the next commit, and a set of usability/typesafety macros will
come after.
This module implements a way to send messages from one module to
another, with associated data types. It does not yet do anything to
ensure that messages are correct, that types match, or that other
forms of consistency are preserved.
We already do this in our log_debug() macro, but there are times
when we'd like to avoid allocating or precomputing something that we
are only going to log if debugging is on.
Previously, or_connection_t did not record whether or not the
connection uses a pluggable transport. Instead, it stored the
underlying proxy protocol of the pluggable transport in
proxy_type. This made bootstrap reporting treat pluggable transport
connections as plain proxy connections.
Store a separate bit indicating whether a pluggable transport is in
use, and decode this during bootstrap reporting.
Fixes bug 28925; bugfix on 0.4.0.1-alpha.
When NULL is given to lpApplicationName we enable Windows' "magical"
path interpretation logic, which makes Tor 0.4.x behave in the same way
as previous Tor versions did when it comes to executing binaries in
different system paths.
For more information about this have a look at the CreateProcessA()
documentation on MSDN -- especially the string interpretation example is
useful to understand this issue.
This bug was introduced in commit bfb94dd2ca.
See: https://bugs.torproject.org/29874
The name of circpad_machine_state_t was very confusing since it was conflicting
with circpad_state_t and circpad_circuit_state_t.
Right now here is the current meaning of these structs:
circpad_state_t -> A state of the state machine.
circpad_machine_runtime_t -> The current mutable runtime info of the state machine.
circpad_circuit_state_t -> Circuit conditions based on which we should apply a machine to the circuit
so that the relays that would be "excluded" from the bandwidth
file because of something failed can be included to diagnose what
failed, without still including these relays in the bandwidth
authorities vote.
Closes#29806.
This is something we should think about harder, but we probably want dormant
mode to be more powerful than padding in case a client has been inactive for a
day or so. After all, there are probably no circuits open at this point and
dormant mode will not allow the client to open more circuits.
Furthermore, padding should not block dormant mode from being activated, since
dormant mode relies on SocksPort activity, and circuit padding does not mess
with that.
They are simply not used apart from assigning a pointer and asserting on the
pointer depending on the cell direction.
Closes#29196.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
They were causing the following warnings in circuitpadding/circuitpadding_sample_distribution:
src/lib/math/prob_distr.c:1311:17: runtime error: division by zero
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior src/lib/math/prob_distr.c:1311:17 in
src/lib/math/prob_distr.c:1219:49: runtime error: division by zero
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior src/lib/math/prob_distr.c:1219:49 in
because the distributions were called with erroneous parameters (e.g. geometric
distribution with p=0).
We now defined these test probability distributions with more realistic
parameters.
As far as the circuitpadding_sample_distribution() test is concerned, it
doesn't matter if the distributions return values outside of [0,10] since we
already restrict the values into that interval using min=0 and max=10 (and RTT
estimate is disabled).
The previous commits introduced link_specifier_dup(), which is
implemented using trunnel's opaque interfaces. So we can now
remove hs_desc_link_specifier_dup().
Cleanup after bug 22781.
Cleanup some bugs discovered during 23576:
* stop copying the first 20 characters of a 40-character hex string
to a binary fingerprint
* stop putting IPv6 addresses in a variable called "ipv4"
* explain why we do a duplicate tt_int_op() to deliberately fail and
print a value
Fixes bug 29243; bugfix on 0.3.2.1-alpha.
The previous commits for 23576 confused hs_desc_link_specifier_t
and link_specifier_t. Removing hs_desc_link_specifier_t fixes this
confusion.
Fixes bug 22781; bugfix on 0.3.2.1-alpha.
Check if the new pointer is the same as the old one: if it is, it's
probably a bug:
* the caller may have confused current and previous, or
* they may have forgotten to sr_srv_dup().
Putting NULL multiple times is allowed.
Part of 29706.
Refactor the shared random state's memory management so that it actually
takes ownership of the shared random value pointers.
Fixes bug 29706; bugfix on 0.2.9.1-alpha.
Stop leaking parts of the shared random state in the shared-random unit
tests. The previous fix in 29599 was incomplete.
Fixes bug 29706; bugfix on 0.2.9.1-alpha.
Turns out that when reloading a tor configured with hidden service(s), we
weren't copying all the needed information between the old service object to
the new one.
For instance, the desc_is_dirty timestamp wasn't which could lead to the
service uploading its descriptor much later than it would need to.
The replaycache wasn't also moved over and some intro point information as
well.
Fixes#23790
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit also explicitly set the value of the PRT enum so we can match/pin
the C enum values to the Rust one in protover/ffi.rs.
Fixes#29631
Signed-off-by: David Goulet <dgoulet@torproject.org>
There's an incorrect comment in compat_time.c that suggests we call
FreeLibrary() before we're done using the library's functions.
See 29642 for background.
Closes ticket 29643.
* Move out code that depends on NSS to crypto_digest_nss.c
* Move out code that depends on OpenSSL to crypto_digest_openssl.c
* Keep the general code that is not specific to any of the above in
crypto_digest.c
Prior to #23100, we were not counting HS circuit build times in our
calculation of the timeout. This could lead to a condition where our timeout
was set too low, based on non HS circuit build times, and then we would
abandon all HS circuits, storing no valid timeouts in the histogram.
This commit avoids the assert.
When "auto" was used for the port number for a listening socket, the
message logged after opening the socket would incorrectly say port 0
instead of the actual port used.
Fixes bug 29144; bugfix on 0.3.5.1-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
This patch fixes a crash bug (assertion failure) in the PT subsystem
that could get triggered if the user cancels bootstrap via the UI in
TorBrowser. This would cause Tor to call `managed_proxy_destroy()` which
called `process_free()` after it had called `process_terminate()`. This
leads to a crash when the various process callbacks returns with data
after the `process_t` have been freed using `process_free()`.
We solve this issue by ensuring that everywhere we call
`process_terminate()` we make sure to detach the `managed_proxy_t` from
the `process_t` (by calling `process_set_data(process, NULL)`) and avoid
calling `process_free()` at all in the transports code. Instead we just
call `process_terminate()` and let the process exit callback in
`managed_proxy_exit_callback()` handle the `process_free()` call by
returning true to the process subsystem.
See: https://bugs.torproject.org/29562
Fixes bug 29530, where the LOG_ERR messages were occurring when
we had no configured network, and so we were failing the unit tests
because of the recently-merged #28668.
Commit message edited by teor:
We backported 28668 and released it in 0.3.5.8.
This commit backports 29530 to 0.3.5.
Fixes bug 29530 in Tor 0.3.5.8.
When IPv4Only (IPv6Only) was used but the address could not be
interpreted as a IPv4 (IPv6) address, the error message referred
to the wrong IP version.
This also fixes up the error-checking logic so it's more precise
about what's being checked.
Fixes bug 13221; bugfix on 0.2.3.9-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
This test was previously written to use the contents of the system
headers to decide whether INHERIT_NONE or INHERIT_ZERO was going to
work. But that won't work across different environments, such as
(for example) when the kernel doesn't match the headers. Instead,
we add a testing-only feature to the code to track which of these
options actually worked, and verify that it behaved as we expected.
Closes ticket 29541; bugfix not on any released version of Tor.
KIST works by computing how much should be allowed to write to the kernel for
a given socket, and then it writes that amount to the outbuf.
The problem is that it could be possible that the outbuf already has lots of
data in it from a previous scheduling round (because the kernel is full/busy
and Tor was not able to flush the outbuf yet). KIST ignores that the outbuf
has been filling (is above its "highwater") and writes more anyway. The end
result is that the outbuf length would exceed INT_MAX, hence causing an
assertion error and a corresponding "Bug()" message to get printed to the
logs.
This commit makes it for KIST to take into account the outbuf length when
computing the available space.
Bug found and patch by Rob Jansen.
Closes#29168. TROVE-2019-001.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Fixes bug 29530, where the LOG_ERR messages were occurring when
we had no configured network, and so we were failing the unit tests
because of the recently-merged #28668.
Bug not in any released Tor.
This test fails in some environments; since the code isn't used in
0.4.0, let's disable it for now.
Band-aid solution for #29534; bug not in any released Tor.
malloc_options needs to be declared extern (and declaring it extern
means we need to initialize it separately)
Fixes bug 29145; bugfix on 0.2.9.3-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Also:
* delete some obsolete code that was #if 0
* improve cleanup on failure
* make the dir_format tests more consistent with each other
* construct the descriptors using smartlist chunks
This refactor is incomplete, because removing the remaining duplicate
code would be time-consuming.
Part of 29017 and 29018.
Remove router_update_info_send_unencrypted(), and move its code into the
relevant functions.
Then, re-use an options pointer.
Preparation for testing 29017 and 20918.
Remove some tiny static functions called by router_build_fresh_descriptor(),
and move their code into more relevant functions.
Then, give router_update_{router,extra}info_descriptor_body identical layouts.
Preparation for testing 29017 and 20918.
Make sure that these static functions aren't passed NULL.
If they are, log a BUG() warning, and return an error.
Preparation for testing 29017 and 20918.
Split the body of router_build_fresh_descriptor() into static functions,
by inserting function prologues and epilogues between existing sections.
Write a new body for router_build_fresh_descriptor() that calls the new
static functions.
Initial refactor with no changes to the body of the old
router_build_fresh_descriptor(), except for the split.
Preparation for testing 29017 and 20918.
When ExtraInfoStatistics is 0, stop including bandwidth usage statistics,
GeoIPFile hashes, ServerTransportPlugin lines, and bridge statistics
by country in extra-info documents.
Fixes bug 29018; bugfix on 0.2.4.1-alpha (and earlier versions).
This module is currently implemented to use the same technique as
libottery (later used by the bsds' arc4random replacement), using
AES-CTR-256 as its underlying stream cipher. It's backtracking-
resistant immediately after each call, and prediction-resistant
after a while.
Here's how it works:
We generate psuedorandom bytes using AES-CTR-256. We generate BUFLEN bytes
at a time. When we do this, we keep the first SEED_LEN bytes as the key
and the IV for our next invocation of AES_CTR, and yield the remaining
BUFLEN - SEED_LEN bytes to the user as they invoke the PRNG. As we yield
bytes to the user, we clear them from the buffer.
Every RESEED_AFTER times we refill the buffer, we mix in an additional
SEED_LEN bytes from our strong PRNG into the seed.
If the user ever asks for a huge number of bytes at once, we pull SEED_LEN
bytes from the PRNG and use them with our stream cipher to fill the user's
request.
Because the test is adding entries to the "rend_cache" directly, the
rend_cache_increment_allocation() was never called which made the
rend_cache_clean() call trigger that underflow warning:
rend_cache/clean: [forking] Nov 29 09:55:04.024 [warn] rend_cache_decrement_allocation(): Bug: Underflow in rend_cache_decrement_allocation (on Tor 0.4.0.0-alpha-dev 2240fe63feb9a8cf)
The test is still good and valid.
Fixes#28660
Signed-off-by: David Goulet <dgoulet@torproject.org>
Using an anonymous mmap() is a good way to get pages that we can set
kernel-level flags on, like minherit() or madvise() or mlock().
We're going to use that so that we can make uninheritable locked
pages to store PRNG data.
Rewrite service_intro_point_new() to take a node_t. Since
node_get_link_specifier_smartlist() supports IPv6 link specifiers,
this refactor adds IPv6 addresses to onion service descriptors.
Part of 23576, implements 26992.
Because the test is adding entries to the "rend_cache" directly, the
rend_cache_increment_allocation() was never called which made the
rend_cache_clean() call trigger that underflow warning:
rend_cache/clean: [forking] Nov 29 09:55:04.024 [warn] rend_cache_decrement_allocation(): Bug: Underflow in rend_cache_decrement_allocation (on Tor 0.4.0.0-alpha-dev 2240fe63feb9a8cf)
The test is still good and valid.
Fixes#28660
Signed-off-by: David Goulet <dgoulet@torproject.org>
Also, when we log about a failure from base32_decode(), we now
say that the length is wrong or that the characters were invalid:
previously we would just say that there were invalid characters.
Follow-up on 28913 work.
The code checked for sysctl being available and HW_PHYSMEM being
defined, but HW_USERMEM was actually being used with sysctl instead
of HW_PHYSMEM.
The case for OpenBSD, etc. use HW_PHYSMEM64 (which is obviously a
64-bit variant of HW_PHYSMEM) and the case for OSX uses HW_MEMSIZE
(which appears to be a 64-bit variant of HW_PHYSMEM).
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
We log these messages at INFO level, except when we are reading a
private key from a file, in which case we log at WARN.
This fixes a regression from when we re-wrote our PEM code to be
generic between nss and openssl.
Fixes bug 29042, bugfix on 0.3.5.1-alpha.
When cleaning up after an error in process_unix_exec, the stdin
pipe was being double closed instead of closing both the stdin
and stdout pipes. This occurred in two places.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
NOTE: This commit breaks the build, because there was a mistake in an
earlier change of exactly the sort that this is meant to detect! I'm
leaving it broken for illustration.
Test exactly what the geometric sampler returns, because that's what
the downstream callers of it are going to use.
While here, also assert that the geometric sampler returns a positive
integer. (Our geometric distribution is the one suported on {1, 2,
3, ...} that returns the number of trials before the first success,
not the one supported on {0, 1, 2, ...} that returns the number of
failures before the first success.)
In file included from ./src/core/or/or_circuit_st.h:12:0,
from src/core/or/circuitlist.c:112:
./src/core/or/circuit_st.h:15:39: error: redefinition of typedef ‘circpad_machine_spec_t’
./src/core/or/circuitpadding.h:572:3: note: previous declaration of ‘circpad_machine_spec_t’ was here
./src/core/or/circuit_st.h:16:40: error: redefinition of typedef ‘circpad_machine_state_t’
./src/core/or/circuitpadding.h:517:3: note: previous declaration of ‘circpad_machine_state_t’ was here
In file included from src/core/or/connection_edge.c:70:0:
./src/core/or/circuitpadding.h:16:26: error: redefinition of typedef ‘circuit_t’
./src/core/or/or.h:930:26: note: previous declaration of ‘circuit_t’ was here
./src/core/or/circuitpadding.h:17:33: error: redefinition of typedef ‘origin_circuit_t’
./src/core/or/or.h:931:33: note: previous declaration of ‘origin_circuit_t’ was here
./src/core/or/circuitpadding.h:18:23: error: redefinition of typedef ‘cell_t’
./src/core/or/or.h:628:23: note: previous declaration of ‘cell_t’ was here
typedef doesn't work for forward declarations, but plain struct
without a typedef wrapper does (and unlike the _t type aliases makes
it clearer for everyone whether you're talking about the struct or
the pointer).
Stop logging "Tried to establish rendezvous on non-OR circuit..." as
a warning. Instead, log it as a protocol warning, because there is
nothing that relay operators can do to fix it.
Fixes bug 29029; bugfix on 0.2.5.7-rc.
Prior to this commit, the testsuite was failing on OpenBSD. After
this commit the testsuite runs fine on OpenBSD.
It was previously decided to test for the OpenBSD macro (rather than
__OpenBSD__, etc.) because OpenBSD forks seem to have the former
macro defined. sys/param.h must be included for the OpenBSD macro
definition; however, many files tested for the OpenBSD macro without
having this header included.
This commit includes sys/param.h in the files where the OpenBSD macro
is used (and sys/param.h is not already included), and it also
changes some instances of the __OpenBSD__ macro to OpenBSD.
See commit 27df23abb6 which changed
everything to use OpenBSD instead of __OpenBSD__ or OPENBSD. See
also tickets #6982 and #20980 (the latter ticket is where it was
decided to use the OpenBSD macro).
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
In get_local_listener used by tor_ersatz_socketpair, the address
family used when binding the IPv6 socket was AF_INET instead of
AF_INET6.
Fixes bug 28995; bugfix on 0.3.5.1-alpha.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Reported on tor-dev by Gisle Vanem. Bug not in any released Tor
(The suggested patch used _MSC_VER, but that's not how we do stuff
with autoconf. With autoconf, you detect the feature you want,
rather than trying to list all the systems that do or do not have
it.)
In theory it would be better to detect this bug in advance, but this
approach is much simpler, and therefore safer to backport.
This closes tor issue 28973.
This project introduces the prob_distr.c subsystem which implements all the
probability distributions that WTF-PAD needs. It also adds unittests for all of
them.
Code and tests courtesy of Riastradh.
Co-authored-by: Taylor R Campbell <campbell+tor@mumble.net>
Co-authored-by: Mike Perry <mikeperry-git@torproject.org>
Hope is this will make it easier to test on the live tor network.
Does not need to be merged if we don't want to, but will come in handy
for researchers.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
This implements all of the event handling, state machines, and padding
decisions for circuit padding.
I recommend reviewing this after you look at the call-in points into it from
the rest of Tor.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
These callbacks allow the padding state machines to react to various types of
sent and received relay cells.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
These event callbacks allow circuit padding to decide when to attempt to
launch and negotiate new padding machines, and when to tear old ones down.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
This is a good code review start point, to get an overview of the interfaces
and types used in circuit padding.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
We need this for padding negotiation so that we can have later machine
revisions supercede earlier ones.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
signed_descriptor_digest has a length of DIGEST_LEN but the memset
used to fill it used DIGEST256_LEN.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Redefine the set of bootstrap phases to allow display of finer-grained
progress in the early connection stages of connecting to a relay.
This includes adding intermediate phases for proxy and PT connections.
Also add a separate new phase to indicate obtaining enough directory
info to build circuits so we can report that independently of actually
initiating an ORCONN to build the first application circuit.
Previously, we would claim to be connecting to a relay when we had
merely finished obtaining directory info.
Part of ticket 27167.
Replace a few invocations of control_event_bootstrap() with calls from
the bootstrap tracker subsystem. This mostly leaves behavior
unchanged. The actual behavior changes come in the next commit.
Part of ticket 27167.
Linked connections aren't woken up by libevent due to I/O but rather
artificially so we can, by chunks, empty the spooled object(s).
Commit 5719dfb48f (in 0.3.4.1-alpha) made it
that the schedule_active_linked_connections_event would be only called once at
startup but this is wrong because then we would never go through again the
active linked connections.
Fortunately, everytime a new linked connection is created, the event is
activated and thus we would go through the active list again. On a busy relay,
this issue is mitigated by that but on a slower relays or bridge, a connection
could get stuck for a while until a new directory information request would
show up.
Fixes#28717, #28912
Add a tracker for bootstrap progress, tracking events related to
origin circuit and ORCONN states. This uses the ocirc_event and
orconn_event publish-subscribe subsystems.
Part of ticket 27167.
Add a publish-subscribe subsystem to publish messages about changes to
origin circuits.
Functions in circuitbuild.c and circuitlist.c publish messages to this
subsystem.
Move circuit event constants out of control.h so that subscribers
don't have to include all of control.h to take actions based on
messages they receive.
Part of ticket 27167.
Add a publish-subscribe subsystem to publish messages about changes to
OR connections.
connection_or_change_state() in connection_or.c and
control_event_or_conn_event() in control.c publish messages to this
subsystem via helper functions.
Move state constants from connection_or.h to orconn_state.h so that
subscribers don't have to include all of connection_or.h to take
actions based on changes in OR connection state. Move event constants
from control.h for similar reasons.
Part of ticket 27167.
connection_or_change_state() saved an old_state to pass to
channel_tls_handle_state_change_on_orconn(), which promptly cast it to
void. Remove this unused variable and parameter.
This patch changes the CancelIoEx() example code to use CancelIo(),
which is available for older versions of Windows too. I still think the
kernel handles this nicely by sending broken pipes if either side
closes the pipe while I/O operations are pending.
See: https://bugs.torproject.org/28179
Handle `ERROR_BROKEN_PIPE` from ReadFileEx() and WriteFileEx() in
process_win32_stdin_write_done() and
process_win32_handle_read_completion() instead of in the early handler.
This most importantmly makes sure that `reached_eof` is set to true when
these errors appears.
See: https://bugs.torproject.org/28179
This patch adds some missing calls to set `reached_eof` of our handles
when various error conditions happens or when we close our handle (which
happens at `process_terminate()`.
See: https://bugs.torproject.org/28179
This patch adds some additional error checking after calls to
ReadFileEx() and WriteFileEx(). I have not managed to get this code to
reach the branch where `error_code` is NOT `ERROR_SUCCESS`, but MSDN
says one should check for this condition so we do so just to be safe.
See: https://bugs.torproject.org/28179
This patch makes us delay checking for whether we have an exit code
value (via GetExitCodeProcess()) until both stdout and stderr have been
closed by the operating system either by the process itself or by
process cleanup after termination.
See: https://bugs.torproject.org/28179
This patch adds support for the new STATUS message that PT's can emit
from their standard out. The STATUS message uses the `config_line_t` K/V
format that was recently added in Tor.
See: https://bugs.torproject.org/28846
This patch changes the LOG pluggable transport message to use the recent
K/V parser that landed in Tor. This allows PT's to specify the log
severity level as well as the message. A mapping between the PT log
severity levels and Tor's log serverity level is provided.
See: https://bugs.torproject.org/28846
Previously we had decoded the asn.1 to get a public key, and then
discarded the asn.1 so that we had to re-encode the key to store it
in the onion_pkey field of a microdesc_t or routerinfo_t.
Now we can just do a tor_memdup() instead, which should be loads
faster.
Previously, we would decode the PEM wrapper for keys twice: once in
get_next_token, and once later in PEM decode. Now we just do all of
the wrapper and base64 stuff in get_next_token, and store the
base64-decoded part in the token object for keys and non-keys alike.
This change should speed up parsing slightly by letting us skip a
bunch of stuff in crypto_pk_read_*from_string(), including the tag
detection parts of pem_decode(), and an extra key allocation and
deallocation pair.
Retaining the base64-decoded part in the token object will allow us
to speed up our microdesc parsing, since it is the asn1 portion that
we actually want to retain.
This patch makes sure that we terminate the event loop from the event
loop timer instead of directly in the process' exit handler. This allows
us to run the event loop an additional time to ensure that the SleepEx()
call on Windows is called and the data from stdout/stderr is delivered
to us.
Additionally we ensure that we don't try to read or write data from a
Unix process that have been terminated in the main loop, since its file
descriptors are closed at that time.
See: https://bugs.torproject.org/28179
This patch changes the API of the Windows backend of the Process
subsystem to allow the dormant interface to disable the Process event
timer.
See: https://bugs.torproject.org/28179
This patch changes our EVENT_TRANSPORT_LOG event to be EVENT_PT_LOG. The
new message includes the path to the PT executable instead of the
transport name, since one PT binary can include multiple transport they
sometimes might need to log messages that are not specific to a given
transport.
See: https://bugs.torproject.org/28179
This patch changes our process_t's exit_callback to return a boolean
value. If the returned value is true, the process subsystem will call
process_free() on the given process_t.
See: https://bugs.torproject.org/28179
This patch changes the slow process_t tests to use
run_main_loop_until_done() instead of do_main_loop() since
do_main_loop() initializes a lot of subsystem callbacks that we don't
need to run in our tests.
See: https://bugs.torproject.org/28179
This patch disables fork()'ing of the slow process tests. This fixes the
tests on the MacOS and other kqueue() based platforms.
Without this patch the main loop exits eearly with EBADF as error.
See: https://bugs.torproject.org/28179
This patch moves the remaining code from subprocess.{h,c} to more
appropriate places in the process.c and process_win32.c module.
We also delete the now empty subprocess module files.
See: https://bugs.torproject.org/28179
This patch adds test cases for process_t which uses Tor's main loop.
This allows us to test that the callbacks are actually invoked by the
main loop when we expect them.
See: https://bugs.torproject.org/28179
This patch adds support for the "LOG" protocol message from a pluggable
transport. This allows pluggable transport developers to relay log
messages from their binary to Tor, which will both emit them as log
messages from the Tor process itself, but also pass them on via the
control port.
See: https://bugs.torproject.org/28180
See: https://bugs.torproject.org/28181
See: https://bugs.torproject.org/28182
This patch makes the managed proxy subsystem use the process_t data
structure such that we can get events from the PT process while Tor is
running and not just when the PT process is being configured.
See: https://bugs.torproject.org/28179
This patch adds a new function that allows us to reset the environment
of a given process_t with a list of key/value pairs.
See: https://bugs.torproject.org/28179
This patch makes sure that we call process_notify_event_exit() after we
have done any modifications we need to do to the state of a process_t.
This allows application developers to call process_free() in the
exit_callback of the process.
See: https://bugs.torproject.org/28179
This patch adds support for getting the unique process identifier from a
given process_t. This patch implements both support for both the Unix
and Microsoft Windows backend.
See: https://bugs.torproject.org/28179
This patch adds support for Microsoft Windows in the Process subsystem.
Libevent does not support mixing different types of handles (sockets,
named pipes, etc.) on Windows in its core event loop code. This have
historically meant that Tor have avoided attaching any non-networking
handles to the event loop. This patch uses a slightly different approach
to roughly support the same features for the Process subsystem as we do
with the Unix backend.
In this patch we use Windows Extended I/O functions (ReadFileEx() and
WriteFileEx()) which executes asynchronously in the background and
executes a completion routine when the scheduled read or write operation
have completed. This is much different from the Unix backend where the
operating system signals to us whenever a file descriptor is "ready" to
either being read from or written to.
To make the Windows operating system execute the completion routines of
ReadFileEx() and WriteFileEx() we must get the Tor process into what
Microsoft calls an "alertable" state. To do this we execute SleepEx()
with a zero millisecond sleep time from a main loop timer that ticks
once a second. This moves the process into the "alertable" state and
when we return from the zero millisecond timeout all the outstanding I/O
completion routines will be called and we can schedule the next reads
and writes.
The timer loop is also responsible for detecting whether our child
processes have terminated since the last timer tick.
See: https://bugs.torproject.org/28179
This patch adds the Unix backend for the Process subsystem. The Unix
backend attaches file descriptors from the child process's standard in,
out and error to Tor's libevent based main loop using traditional Unix
pipes. We use the already available `waitpid` module to get events
whenever the child process terminates.
See: https://bugs.torproject.org/28179
This patch adds a new Process subsystem for running external programs in
the background of Tor. The design is focused around a new type named
`process_t` which have an API that allows the developer to easily write
code that interacts with the given child process. These interactions
includes:
- Easy API for writing output to the child process's standard input
handle.
- Receive callbacks whenever the child has output on either its standard
output or standard error handles.
- Receive callback when the child process terminates.
We also support two different "protocols" for handling output from the
child process. The default protocol is the "line" protocol where the
process output callbacks will be invoked only when there is complete
lines (either "\r\n" or "\n" terminated). We also support the "raw"
protocol where the read callbacks will get whatever the operating system
delivered to us in a single read operation.
This patch does not include any operating system backends, but the Unix
and Windows backends will be included in separate commits.
See: https://bugs.torproject.org/28179
The strcmp_len() function was somewhat misconceived, since we're
only using it to test whether a length+extent string is equal to a
NUL-terminated string or not. By simplifying it and making it
inlined, we should be able to make it a little faster.
(It *does* show up in profiles.)
Closes ticket 28856.
The old implementation did some funky out-of-order lexing, and
tended to parse every port twice if the %d-%d pattern didn't match.
Closes ticket 28853.
I believe we originally added this for "just in case" safety, but it
isn't actually needed -- we never copy uninitialized stack here.
What's more, this one memset is showing up on our startup profiles,
so we ought to remove it.
Closes ticket 28852.
The point of this function is to make sure that the ed25519-based
implementation of curve25519_basepoint() actually works when we
start tor, and use the regular fallback implementation if it
doesn't. But it accounts for 9% of our startup time in the case
when we have directory information, and I think it's safe to make
the test shorter. After all, it has yet to find any actual bugs in
curved25519_scalarmult_basepoint_donna() on any platforms.
Closes ticket 28838.
When the clock jumps, and we have a record of last user activity,
adjust that record. This way if I'm inactive for 10 minutes and
then the laptop is sleeping for an hour, I'll still count as having
been inactive for 10 minutes.
Previously, we treat every jump as if it were activity, which is
ridiculous, and would prevent a Tor instance with a jumpy clock from
ever going dormant.
encoding and decoding.
There are bunches of places where we don't want to invest in a full
fuzzer, but we would like to make sure that some string operation
can handle all its possible inputs. This fuzzer uses the first byte
of its input to decide what to do with the rest of the input. Right
now, all the possibilities are decoding a string, and seeing whether
it is decodeable. If it is, we try to re-encode it and do the whole
thing again, to make sure we get the same result.
This turned up a lot of bugs in the key-value parser, and I think it
will help in other cases too.
Closes ticket 28808.
Add the bootstrap tag name to the log messages, so people
troubleshooting connection problems can look up a symbol instead of a
number. Closes ticket 28731.
Merge Phoul's two lists into teor's list.
Replace the 150 fallbacks originally introduced in Tor 0.3.3.1-alpha in
January 2018 (of which ~115 were still functional), with a list of
157 fallbacks (92 new, 65 existing, 85 removed) generated in
December 2018.
Closes ticket 24803.
Replace the 150 fallbacks originally introduced in Tor 0.3.3.1-alpha in
January 2018 (of which ~115 were still functional), with a list of
148 fallbacks (89 new, 59 existing, 91 removed) generated in
December 2018.
Closes ticket 24803.
When retrying all SOCKS connection because new directory information just
arrived, do not BUG() if a connection in state AP_CONN_STATE_RENDDESC_WAIT is
found to have a usable descriptor.
There is a rare case when this can happen as detailed in #28669 so the right
thing to do is put that connection back in circuit wait state so the
descriptor can be retried.
Fixes#28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
This helper function marks an entry connection as pending for a circuit and
changes its state to AP_CONN_STATE_CIRCUIT_WAIT. The timestamps are set to
now() so it can be considered as new.
No behaviour change, this helper function will be used in next commit.
Part of #28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the helper function connection_ap_mark_as_waiting_for_renddesc()
introduced in previous commit everywhere in the code where an AP connection
state is transitionned to AP_CONN_STATE_RENDDESC_WAIT.
Part of #28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
The transition for a connection to either become or go back in
AP_CONN_STATE_RENDDESC_WAIT state must make sure that the entry connection is
_not_ in the waiting for circuit list.
This commit implements the helper function
connection_ap_mark_as_waiting_for_renddesc() that removes the entry connection
from the pending list and then change its state. This code pattern is used in
many places in the code where next commit will remove this code duplication to
use this new helper function.
Part of #28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
Rather than initializing the "Dormant" status to "off" and the "last
activity" count to "now", initialize them based on our state file:
stay dormant if we were dormant, or remember the amount of time
we've spent inactive.
Additionally, use it to test that is_staledesc is set correctly.
Eventually we'll want to test all the other flags, but I'm aiming
for only adding coverage on the changed code here.
Because the test is adding entries to the "rend_cache" directly, the
rend_cache_increment_allocation() was never called which made the
rend_cache_clean() call trigger that underflow warning:
rend_cache/clean: [forking] Nov 29 09:55:04.024 [warn] rend_cache_decrement_allocation(): Bug: Underflow in rend_cache_decrement_allocation (on Tor 0.4.0.0-alpha-dev 2240fe63feb9a8cf)
The test is still good and valid.
Fixes#28660
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch adds two new functions: buf_flush_to_pipe() and
buf_read_from_pipe(), which makes use of our new buf_flush_to_fd() and
buf_read_from_fd() functions.
See: https://bugs.torproject.org/28179
This patch refactors buf_read_from_socket() into buf_read_from_fd(), and
creates a specialized function for buf_read_from_socket(), which uses
buf_read_from_fd().
See: https://bugs.torproject.org/28179
This patch refactors buf_flush_to_socket() into buf_flush_to_fd() and
creates a specialization function for buf_flush_to_socket() that makes
use of buf_flush_to_fd().
See: https://bugs.torproject.org/28179
The DormantClientTimeout option controls how long Tor will wait before
going dormant. It also provides a way to disable the feature by setting
DormantClientTimeout to e.g. "50 years".
The DormantTimeoutDisabledByIdleStreams option controls whether open but
inactive streams count as "client activity". To implement it, I had to
make it so that reading or writing on a client stream *always* counts as
activity.
Closes ticket 28429.
Specifically, if the consensus is older than the (estimted or
measured) release date for this version of tor, we assume that the
required versions may have changed in between that consensus and
this release.
Implements ticket 27735 and proposal 297.
This patch has routers use the same canonicalization logic as
authorities when encoding their family lists. Additionally, they
now warn if any router in their list is given by nickname, since
that's error-prone.
This patch also adds some long-overdue tests for family formatting.
Prop298 says that family entries should be formatted with
$hexids in uppercase, nicknames in lower case, $hexid~names
truncated, and everything sorted lexically. These changes implement
that ordering for nodefamily.c.
We don't _strictly speaking_ need to nodefamily.c formatting use
this for prop298 microdesc generation, but it seems silly to have
two separate canonicalization algorithms.
After we clear the protover map for getting full, we need to
re-create it, since we are about to use it.
This is a bugfix for bug 28558. It is a bugfix for the code from
ticket 27225, which is not in any released Tor. Found by Google
OSS-Fuzz, as issue 11475.
To succesful compile tor-print-ed-signing-cert.exe on Windows we
sometimes need to include the @TOR_LIB_GDI@ library.
See: https://bugs.torproject.org/28485
This representation is meant to save memory in microdescriptors --
we can't use it in routerinfo_t yet, since those families need to be
encoded losslessly for directory voting to work.
This representation saves memory in three ways:
1. It uses only one allocation per family. (The old way used a
smartlist (2 allocs) plus one strdup per entry.)
2. It stores identity digests in binary, not hex.
3. It keeps families in a canonical format, memoizes, and
reference-counts them.
Part of #27359.
This event makes us become dormant if we have seen no activity in a
long time.
Note that being any kind of a server, or running an onion service,
always counts as being active.
Note that right now, just having an open stream that Tor
did not open on its own (for a directory request) counts as "being
active", so if you have an idle ssh connection, that will keep Tor
from becoming dormant.
Many of the features here should become configurable; I'd like
feedback on which.
This is part of 28422, so we don't have to call
consider_hibernation() once per second when we're dormant.
This commit does not remove delayed shutdown from hibernate.c: it
uses it as a backup shutdown mechanism, in case the regular shutdown
timer mechanism fails for some reason.
The previous "ALL" role was the OR of a bunch of other roles,
which is a mistake: it's better if "ALL" means "all".
The "NET_PARTICIPANT" role refers to the anything that is actively
building circuits, downloading directory information, and
participating in the Tor network. For now, it is set to
!net_is_disabled(), but we're going to use it to implement a new
"extra dormant mode".
Closes ticket 28336.
Correctly identify Windows 8.1, Windows 10, and Windows Server 2008
and later from their NT versions.
On recent Windows versions, the GetVersionEx() function may report
an earlier Windows version than the running OS. To avoid user
confusion, add "[or later]" to Tor's version string on affected
versions of Windows.
Remove Windows versions that were never supported by the
GetVersionEx() function.
Stop duplicating the latest Windows version in get_uname().
Fixes bug 28096; bugfix on 0.2.2.34; reported by Keifer Bly.
In conn_close_if_marked(), we can decide to keep a connection open that still
has data to flush on the wire if it is being rate limited on the write side.
However, in this process, we were also looking at the read() side which can
still have token in its bucket and thus not stop the reading. This lead to a
BUG() introduced in 0.3.4.1-alpha that was expecting the read side to be
closed due to the rate limit but which only applies on the write side.
This commit removes any bandwidth check on the read side and simply stop the
read side on the connection regardless of the bucket state. If we keep the
connection open to flush it out before close, we should not read anything.
Fixes#27750
Signed-off-by: David Goulet <dgoulet@torproject.org>
Apparently some freebsd compilers can't tell that 'c' will never
be used uninitialized.
Fixes bug 28413; bugfix on 0.2.9.3-alpha when we added support for
longer AES keys to this function.
We don't use this syscall, but openssl apparently does.
(This syscall puts a socket into a half-closed state. Don't worry:
It doesn't shut down the system or anything.)
Fixes bug 28183; bugfix on 0.2.5.1-alpha where the sandbox was
introduced.
Apparently, even though the manpage says it returns an int, it
can return a long instead and cause a warning.
Bug not in any released Tor. Part of #28399
Our tests showed that this function is responsible for a huge number
of our malloc/free() calls. It's a prime candidate for being
memoized.
Closes ticket 27225.
Resume refusing to start with relative file paths and RunAsDaemon
set (regression from the fix for bug 22731).
Fixes bug 28298; bugfix on 0.3.3.1-alpha.
If tor terminates due to SIGNAL HALT before test_rebind.py calls
tor_process.terminate(), an OSError 3 (no such process) is thrown.
Fixes part of bug 27968 on 0.3.5.1-alpha.
Remember, you can't check to see if there are N bytes left in a
buffer by doing (buf + N < end), since the buf + N computation might
take you off the end of the buffer and result in undefined behavior.
Fixes 28202; bugfix on 0.2.0.3-alpha.
It is not enough to look at protover for v3 rendezvous support but also we
need to make sure that the curve25519 onion key is present or in other words
that the descriptor has been fetched and does contain it.
Fixes#27797.
Signed-off-by: David Goulet <dgoulet@torproject.org>
With the new refresh_service_descriptor() function we had both
refresh_service_descriptor() and update_service_descriptor() which is basically
the same thing.
This commit renames update_service_descriptor() to
update_service_descriptor_intro_points() to make it clear it's not a generic
refresh and it's only about intro points.
Commit changes no code.
Treat backtrace test failures as expected on NetBSD, OpenBSD, and
macOS/Darwin, until we solve bug 17808.
(FreeBSD failures have been treated as expected since 18204 in 0.2.8.)
Fixes bug 27948; bugfix on 0.2.5.2-alpha.
Before this commit, we would create the descriptor signing key certificate
when first building the descriptor.
In some extreme cases, it lead to the expiry of the certificate which triggers
a BUG() when encoding the descriptor before uploading.
Ticket #27838 details a possible scenario in which this can happen. It is an
edge case where tor losts internet connectivity, notices it and closes all
circuits. When it came back up, the HS subsystem noticed that it had no
introduction circuits, created them and tried to upload the descriptor.
However, in the meantime, if tor did lack a live consensus because it is
currently seeking to download one, we would consider that we don't need to
rotate the descriptors leading to using the expired signing key certificate.
That being said, this commit does a bit more to make this process cleaner.
There are a series of things that we need to "refresh" before uploading a
descriptor: signing key cert, intro points and revision counter.
A refresh function is added to deal with all mutable descriptor fields. It in
turn simplified a bit the code surrounding the creation of the plaintext data.
We keep creating the cert when building the descriptor in order to accomodate
the unit tests. However, it is replaced every single time the descriptor is
uploaded.
Fixes#27838
Signed-off-by: David Goulet <dgoulet@torproject.org>
When storing a descriptor in the client cache, if we are about to replace an
existing descriptor, make sure to close every introduction circuits of the old
descriptor so we don't have leftovers lying around.
Ticket 27471 describes a situation where tor is sending an INTRODUCE1 cell on
an introduction circuit for which it doesn't have a matching intro point
object (taken from the descriptor).
The main theory is that, after a new descriptor showed up, the introduction
points changed which led to selecting an introduction circuit not used by the
service anymore thus for which we are unable to find the corresponding
introduction point within the descriptor we just fetched.
Closes#27471.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It won't be used if there are no authorized client configured. We do that so
we can easily support the addition of a client with a HUP signal which allow
us to avoid more complex code path to generate that cookie if we have at least
one client auth and we had none before.
Fixes#27995
Signed-off-by: David Goulet <dgoulet@torproject.org>
Both client and service had their own code for this. Consolidate into one
place so we avoid duplication.
Closes#27549
Signed-off-by: David Goulet <dgoulet@torproject.org>
Occasionally, key pinning doesn't catch a relay that shares an ed25519
ID with another relay. Log the identity fingerprints and the shared
ed25519 ID when this happens, instead of making a BUG() warning.
Fixes bug 27800; bugfix on 0.3.2.1-alpha.
Commit 488e2b00bf introduced an issue, most
likely introduced by a bad copy paste, that made us stop reading on the
connection if our write bandwidth limit was reached.
The problem is that because "read_blocked_on_bw" was never set, the connection
was never reenabled for reading.
This is most likely the cause of #27813 where bytes were accumulating in the
kernel TCP bufers because tor was not doing reads. Only relays with
RelayBandwidthRate would suffer from this but affecting all relays connecting
to them. And using that tor option is recommended and best practice so many
many relays have it enabled.
Fixes#28089.
