It is AP-specific, so that's where it belongs. This shouldn't have
caused a bug, but due to #17876, we were never actually calling
connection_edge_about_to_close from connection_ap_about_to_close,
causing bug #17874 (aka bug #17752).
When a relay does not have an open directory port but it has an
orport configured and is accepting client connections then it can
now service tunnelled directory requests, too. This was already true
of relays with an dirport configured.
We also conditionally stop advertising this functionality if the
relay is nearing its bandwidth usage limit - same as how dirport
advertisement is determined.
Partial implementation of prop 237, ticket 12538
Applies the 6c443e987d fix to router_pick_directory_server_impl.
6c443e987d applied to directory servers chosen from the consensus,
and was:
"Tweak the 9969 fix a little
If we have busy nodes and excluded nodes, then don't retry with the
excluded ones enabled. Instead, wait for the busy ones to be nonbusy."
These IPv6 addresses must be quoted, because : is the port separator,
and "acce" is a valid hex block.
Add unit tests for assumed actions in IPv6 policies.
"Tor has included a feature to fetch the initial consensus from nodes
other than the authorities for a while now. We just haven't shipped a
list of alternate locations for clients to go to yet.
Reasons why we might want to ship tor with a list of additional places
where clients can find the consensus is that it makes authority
reachability and BW less important.
We want them to have been around and using their current key, address,
and port for a while now (120 days), and have been running, a guard,
and a v2 directory mirror for most of that time."
Features:
* whitelist and blacklist for an opt-in/opt-out trial.
* excludes BadExits, tor versions that aren't recommended, and low
consensus weight directory mirrors.
* reduces the weighting of Exits to avoid overloading them.
* places limits on the weight of any one fallback.
* includes an IPv6 address and orport for each FallbackDir, as
implemented in #17327. (Tor won't bootstrap using IPv6 fallbacks
until #17840 is merged.)
* generated output includes timestamps & Onionoo URL for traceability.
* unit test ensures that we successfully load all included default
fallback directories.
Closes ticket #15775. Patch by "teor".
OnionOO script by "weasel", "teor", "gsathya", and "karsten".
* The option is now KeepBindCapabilities
* We now warn if the user specifically asked for KeepBindCapabilities
and we can't deliver.
* The unit tests are willing to start.
* Fewer unused-variable warnings.
* More documentation, fewer misspellings.
router_digest_is_fallback_dir returns 1 if the digest is in the
currently loaded list of fallback directories, and 0 otherwise.
This function is for future use.
Once tor is downloading a usable consensus, any other connection
attempts are not needed.
Choose a connection to keep, favouring:
* fallback directories over authorities,
* connections initiated earlier over later connections
Close all other connections downloading a consensus.
Prop210: Add attempt-based connection schedules
Existing tor schedules increment the schedule position on failure,
then retry the connection after the scheduled time.
To make multiple simultaneous connections, we need to increment the
schedule position when making each attempt, then retry a (potentially
simultaneous) connection after the scheduled time.
(Also change find_dl_schedule_and_len to find_dl_schedule, as it no
longer takes or returns len.)
Prop210: Add multiple simultaneous consensus downloads for clients
Make connections on TestingClientBootstrapConsensus*DownloadSchedule,
incrementing the schedule each time the client attempts to connect.
Check if the number of downloads is less than
TestingClientBootstrapConsensusMaxInProgressTries before trying any
more connections.
UseDefaultFallbackDirs enables any hard-coded fallback
directory mirrors. Default is 1, set it to 0 to disable fallbacks.
Implements ticket 17576.
Patch by "teor".
On FreeBSD backtrace(3) uses size_t instead of int (as glibc does). This
causes integer precision loss errors when we used int to store its
results.
The issue is fixed by using size_t to store the results of backtrace(3).
The manual page of glibc does not mention that backtrace(3) returns
negative values. Therefore, no unsigned integer wrapping occurs when its
result is stored in an unsigned data type.
Using variables removes the ambiguity about when to use variables and
when to use substitutions. Variables always work. Substitutions only
work when Autoconf knows about them which is not always the case.
The variables are also placed between quotes to ensures spaces in the
variables are handled properly.
Update the code for IPv6 authorities and fallbacks for function
argument changes.
Update unit tests affected by the function argument changes in
the patch.
Add unit tests for authority and fallback:
* adding via a function
* line parsing
* adding default authorities
(Adding default fallbacks is unit tested in #15775.)
The internal memory allocation and history object counters of the
reputation code can be used to verify the correctness of (part of) the
code. Using these counters revealed an issue where the memory allocation
counter is not decreased when the bandwidth arrays are freed.
A new function ensures the memory allocation counter is decreased when a
bandwidth array is freed.
This commit also removes an unnecessary cast which was found while
working on the code.
* Since the variable is no longer modified, it should be called
'policy' instead of 'dest'. ("Dest" is short for
"destination".)
* Fixed the space issue that dgoulet found on the ticket.
* Fixed the comment a little. (We use the imperative for function
documentation.)
Some functions that use digest maps did not mention that the digests are
expected to have DIGEST_LEN bytes. This lead to buffer over-reads in the
past.
The hidden service descriptor cache (rendcache) tests use digest maps
which expect keys to have a length of DIGEST_LEN.
Because the tests use key strings with a length lower than DIGEST_LEN,
the internal copy operation reads outside the key strings which leads to
buffer over-reads.
The issue is resolved by using character arrays with a size of
DIGEST_LEN.
Patch on ade5005853.
The tests pass empty digest strings to the dir_server_new function which
copies it into a directory server structure. The copy operation expects
the digest strings to be DIGEST_LEN characters long.
Because the length of the empty digest strings are lower than
DIGEST_LEN, the copy operation reads outside the digest strings which
leads to buffer over-reads.
The issue is resolved by using character arrays with a size of
DIGEST_LEN.
Patch on 4ff08bb581.
When an HS process an INTRODUCE2 cell, we didn't validate if the IP address
of the rendezvous point was a local address. If it's the case, we end up
wasting resources by trying to extend to a local address which fails since
we do not allow that in circuit_extend().
This commit now rejects a rendezvous point that has a local address once
seen at the hidden service side unless ExtendAllowPrivateAddresses is set.
Fixes#8976
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
There was a dead check when we made sure that an array member of a
struct was non-NULL. Tor has been doing this check since at least
0.2.3, maybe earlier.
Fixes bug 17781.
Previously we'd suppressed the mask-bits field in the output when
formatting a policy if it was >=32. But that should be a >=128 if
we're talking about IPv6.
Since we didn't put these in descriptors, this bug affects only log
messages and controller outputs.
Fix for bug 16056. The code in question was new in 0.2.0, but the
bug was introduced in 0.2.4 when we started supporting IPv6 exits.
port is in host order (addr is tor_addr_t, endianness is abstracted).
addr and port can be different to conn->addr and conn->port if
connecting via a proxy.
Consistently ignore multicast addresses when automatically
generating reject private exit policies.
Closes ticket 17763. Bug fix on 10a6390deb,
not in any released version of Tor. Patch by "teor".
The tor_cert_get_checkable_sig function uses the signing key included in
the certificate (if available) when a separate public key is not given.
When the signature is valid, the tor_cert_checksig function copies the
public key from the checkable structure to the public key field of the
certificate signing key.
In situations where the separate public key is not given but the
certificate includes a signing key, the source and destination pointers
in the copy operation are equal and invoke undefined behavior.
Undefined behaviour is avoided by ensuring both pointers are different.
These functions must really never fail; so have crypto_rand() assert
that it's working okay, and have crypto_seed_rng() demand that
callers check its return value. Also have crypto_seed_rng() check
RAND_status() before returning.
Stop ignoring ExitPolicyRejectPrivate in getinfo
exit-policy/reject-private. Fix a memory leak.
Set ExitPolicyRejectPrivate in the unit tests, and make a mock
function declaration static.
Fix unit tests for get_interface_address6_list to assume less
about the interface addresses on the system.
Instead, mock get_interface_address6_list and use the mocked
function to provide a range of address combinations.
(If we take the branch above this assertion, than we *didn't* have a
v1 handshake. So if we don't take the branch, we did. So if we
reach this assertion, we must be running as a server, since clients
no longer attempt v1 handshakes.)
Fix for bug 17654; bugfix on 9d019a7db7.
Bug not in any released Tor.
Refuse connection requests to private OR addresses unless
ExtendAllowPrivateAddresses is set. Previously, tor would
connect, then refuse to send any cells to a private address.
Fixes bugs 17674 and 8976; bugfix on b7c172c9ec (28 Aug 2012)
Original bug 6710, released in 0.2.3.21-rc and an 0.2.2 maint
release.
Patch by "teor".
This migrates away from SHA1, and provides further hash flooding
protection on top of the randomised siphash implementation.
Add unit tests to make sure that different inputs don't have the
same hash.
The wrong list was used when looking up expired intro points in a rend
service object causing what we think could be reachability issues and
triggering a BUG log.
Fixes#16702
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
exit-policy/reject-private lists the reject rules added by
ExitPolicyRejectPrivate. This makes it easier for stem to
display exit policies.
Add unit tests for getinfo exit-policy/*.
Completes ticket #17183. Patch by "teor".
Modify policies_parse_exit_policy_reject_private so it also blocks
the addresses configured for OutboundBindAddressIPv4_ and
OutboundBindAddressIPv6_, and any publicly routable port addresses
on exit relays.
Add and update unit tests for these functions.
Move the code that rejects publicly routable exit relay addresses
to policies_parse_exit_policy_reject_private. Add
addr_policy_append_reject_addr_list and use it to reject interface
addresses.
This removes the duplicate reject checks on local_address and
ipv6_local_address, but duplicates will be removed by
exit_policy_remove_redundancies at the end of the function.
This also removes the info-level logging on rejected interface
addresses. Instead, log a debug-level message in
addr_policy_append_reject_addr.
This simplifies policies_parse_exit_policy_internal and prepares for
reporting these addresses over the control port in #17183.
In my testing, an IPv6-only FreeBSD jail without ::1 returned EINVAL
from tor_ersatz_socketpair. Let's not fail the unit test because of
this - it would only ever use tor_socketpair() anyway.
(But it won't work on some systems without IPv4/IPv6 localhost
(some BSD jails) by design, to avoid creating sockets on routable
IP addresses. However, those systems likely have the AF_UNIX socketpair,
which tor prefers.)
Fixes bug #17638; bugfix on a very early tor version,
earlier than 22dba27d8d (23 Nov 2004) / svn:r2943.
Patch by "teor".
Make unit tests pass on IPv6-only systems, and systems without
localhost addresses (like some FreeBSD jails).
Fixes:
* get_if_addrs_ifaddrs: systems without localhost
* get_if_addrs_ioctl: only works on IPv4 systems
* socket: check IPv4 and IPv6, skip on EPROTONOSUPPORT
* socketpair_ersatz: uses IPv4, skip on EPROTONOSUPPORT
Fixes bug #17632; bugfix on unit tests in 0.2.7.3-rc.
c464a36772 was a partial fix for this issue in #17255;
it was released in unit tests in 0.2.7.4-rc.
Patch by "teor".
Make unit tests pass on IPv6-only systems, and systems without
localhost addresses (like some FreeBSD jails).
Fixes:
* get_if_addrs_ifaddrs: systems without localhost
* get_if_addrs_ioctl: only works on IPv4 systems
* socket: check IPv4 and IPv6, skip on EPROTONOSUPPORT
* socketpair_ersatz: uses IPv4, skip on EPROTONOSUPPORT
Fixes bug #17632; bugfix on unit tests in 0.2.7.3-rc.
c464a36772 was a partial fix for this issue in #17255;
it was released in unit tests in 0.2.7.4-rc.
Patch by "teor".
Loading a on disk bridge descriptor causes a directory download to be
scheduled, which asserts due to the periodic events not being
initialized yet.
Fixes bug #17635, not in any released version of tor.
Now we only re-scan the list in the cases we did before: when we
have a new circuit that we should try attaching to, or when we have
added a new stream that we haven't tried to attach yet.
This is part of 17590.
Long ago we used to call connection_ap_handshake_attach_circuit()
only in a few places, since connection_ap_attach_pending() attaches
all the pending connections, and does so regularly. But this turned
out to have a performance problem: it would introduce a delay to
launching or connecting a stream.
We couldn't just call connection_ap_attach_pending() every time we
make a new connection, since it walks the whole connection list. So
we started calling connection_ap_attach_pending all over, instead!
But that's kind of ugly and messes up our callgraph.
So instead, we now have connection_ap_attach_pending() use a list
only of the pending connections, so we can call it much more
frequently. We have a separate function to scan the whole
connection array to see if we missed adding anything, and log a
warning if so.
Closes ticket #17590
Mark fallback directory mirrors as "too busy" when they return
a 503 response. Previously, the code just marked authorities as busy.
Unless clients set their own fallback directories, they will never see
this bug. (There are no default fallbacks yet.)
Fixes bug 17572; bugfix on 5c51b3f1f0 released in 0.2.4.7-alpha.
Patch by "teor".
Without this check, we potentially look up to 3 characters before
the start of a malloc'd segment, which could provoke a crash under
certain (weird afaik) circumstances.
Fixes 17404; bugfix on 0.2.6.3-alpha.
* Don't assume that every test box has an IPv4 address
* Don't assume that every test box has a non-local address
Resolves issue #17255 released in unit tests in 0.2.7.3-rc.
Since 11150 removed client-side support for renegotiation, we no
longer need to make sure we have an openssl/TLSvX combination that
supports it (client-side)
Now that x509_get_not{Before,After} are functions in OpenSSL 1.1
(not yet releasesd), we need to define a variant that takes a const
pointer to X509 and returns a const pointer to ASN1_time.
Part of 17237. I'm not convinced this is an openssl bug or a tor
bug. It might be just one of those things.
When logging to syslog, allow a tag to be added to the syslog identity
("Tor"), i.e. the string prepended to every log message. The tag can be
configured by setting SyslogIdentityTag and defaults to none. Setting
it to "foo" will cause logs to be tagged as "Tor-foo". Closes: #17194.
Warn when the state file was last written in the future.
Tor doesn't know that consensuses have expired if the clock is in the past.
Patch by "teor". Implements ticket #17188.
Ensure that either a valid address is returned in address pointers,
or that the address data is zeroed on error.
Ensure that free_interface_address6_list handles NULL lists.
Add unit tests for get_interface_address* failure cases.
Fixes bug #17173.
Patch by fk/teor, not in any released version of tor.
... that was removed by 31eb486c46 which first appeared in
0.2.7.3-rc.
If tor is running in a ElectroBSD (or FreeBSD) jail it can't
get any IP addresses that aren't assigned to the jail by
looking at the interfaces and (by design) the
get_interface_address6_via_udp_socket_hack() fallback doesn't
work either.
The missing return code check resulted in tor_addr_is_internal()
complaining about a "non-IP address of type 49", due to reading
uninitialised memory.
Fixes#17173.
BSD make takes spaces around = literally
and produces a "TESTING_TOR_BINARY "
variable with a trailing space, which leads
to test_keygen.sh failure.
Fixes 17154
Use environment variables instead. This repairs 'make distcheck',
which was running into trouble when it tried to chmod the generated
scripts.
Fixes 17148.
When we find a conflict in the keypinning journal, treat the new
entry as superseding all old entries that overlap either of its
keys.
Also add a (not-yet-used) configuration option to disable keypinning
enforcement.
Update the definition of the private exit policy in the man page
and torrcs. It didn't get merged correctly into the man page, and
it was incomplete in the torrcs. (Unfortunately, we only reject the
primary configured IPv4 and IPv6 addresses, not all configured IPv4
and IPv6 addresses.)
Also fixup msn page formatting errors from changes in tickets 16069
and 17027, mainly unescaped *s.
Advise users how to configure separate IPv4 and IPv6 exit
policies in the manpage and sample torrcs.
Related to fixes in ticket #16069 and #17027. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
src/test/test_policy.c:
Merged calls to policies_parse_exit_policy by adding additional arguments.
fixup to remaining instance of ~EXIT_POLICY_IPV6_ENABLED.
Compacting logic test now produces previous list length of 4, corrected this.
src/config/torrc.sample.in:
src/config/torrc.minimal.in-staging:
Merged torrc modification dates in favour of latest.
Log an info-level message containing the reject line added to the
exit policy for each local IP address blocked by ExitPolicyRejectPrivate:
- Published IPv4 and IPv6 addresses
- Publicly routable IPv4 and IPv6 interface addresses
ExitPolicyRejectPrivate now rejects more local addresses by default:
* the relay's published IPv6 address (if any), and
* any publicly routable IPv4 or IPv6 addresses on any local interfaces.
This resolves a security issue for IPv6 Exits and multihomed Exits that
trust connections originating from localhost.
Resolves ticket 17027. Patch by "teor".
Patch on 42b8fb5a15 (11 Nov 2007), released in 0.2.0.11-alpha.
The unit tests added in e033d5e90b got malformed_list added to
router_parse_addr_policy_item_from_string calls, but unit tests from
subsequent commits didn't get the extra argument until now.
In previous versions of Tor, ExitPolicy accept6/reject6 * produced
policy entries for IPv4 and IPv6 wildcard addresses.
To reduce operator confusion, change accept6/reject6 * to only produce
an IPv6 wildcard address.
Resolves bug #16069.
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
Tor now warns when ExitPolicy lines occur after accept/reject *:*
or variants. These lines are redundant, and were always ignored.
Partial fix for ticket 16069. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
When parsing torrc ExitPolicies, we now warn if:
* an IPv4 address is used on an accept6 or reject6 line. The line is
ignored, but the rest of the policy items in the list are used.
(accept/reject continue to allow both IPv4 and IPv6 addresses in torrcs.)
* a "private" address alias is used on an accept6 or reject6 line.
The line filters both IPv4 and IPv6 private addresses, disregarding
the 6 in accept6/reject6.
When parsing torrc ExitPolicies, we now issue an info-level message:
* when expanding an accept/reject * line to include both IPv4 and IPv6
wildcard addresses.
In each instance, usage advice is provided to avoid the message.
Partial fix for ticket 16069. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
Add get_interface_address[6]_list by refactoring
get_interface_address6. Add unit tests for new and existing functions.
Preparation for ticket 17027. Patch by "teor".
Patch on 42b8fb5a15 (11 Nov 2007), released in 0.2.0.11-alpha.
routerset_parse now accepts IPv6 literal addresses.
Fix for ticket 17060. Patch by "teor".
Patch on 3ce6e2fba2 (24 Jul 2008), and related commits,
released in 0.2.1.3-alpha.
When validating a new descriptor against our rend cache failure, we were
added the failure entry to the new cache entry without duplicating. It was
then freed just after the validation ending up in a very bad memory state
that was making tor abort(). To fix this, a dup function has been added and
used just before adding the failure entry.
Fixes#17041
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
No functional changes, but since NoKeepAliveIsolateSOCKSAuth isn't
part of isoflag, it should be checked where all other similar options
are, and bypass the (no-op) masking at the end.
Increase default boostrap time in test-network.sh to 30 seconds,
for larger networks like bridges+ipv6+hs.
This avoids the failure-hiding issues inherent in the retry approach
in #16952.
This controls the circuit dirtyness reset behavior added for Tor
Browser's user experience fix (#15482). Unlike previous iterations
of this patch, the tunable actually works, and is documented.
(These inputs are possible when Shadow starts the world at time_t 0,
and breaks our assumption that Tor didn't exist in the 1970s.)
Fixes regression introduced in 241e6b09. Fixes#16980.
make test-network-all is Makefile target which verifies a series
of test networks generated using test-network.sh and chutney.
It runs IPv6 and mixed version test networks if the prerequisites are
available.
Each test network reports PASS, FAIL, or SKIP.
Closes ticket 16953. Patch by "teor".
Also adds "--hs-multi-client 1" option to TEST_NETWORK_FLAGS.
This resolves#17012.
Larger networks, such as bridges+hs, may fail until #16952 is merged.
Performing lookups in both the client and service side descriptor
caches from the same rend_cache_lookup_entry() function increases the
risk of accidental API misuse.
I'm separating the lookup functions to keep the caches distinct.
Parameterize the rend_cache_clean() function to allow it clean
old rendezvous descriptors from the service-side cache as well as
the client descriptor cache.
Including the replica number in the HS_DESC CREATED event provides
more context to a control port client. The replica allows clients
to more easily identify each replicated descriptor from the
independantly output control events.
Entries in the service-side descriptor cache are now cleaned when
rend_cache_free_all() is called. The call to tor_free(intro_content)
in rend_cache_store_v2_desc_as_service() is moved to prevent a
potential double-free when a service has a descriptor with a newer
timestamp already in it's service-side descriptor cache.
Adds an Enum which represents the different types of rendezvous
descriptor caches. This argument is passed in each call to
rend_cache_lookup_entry() to specify lookup in the client-side or
service-side descriptor caches.
Adds a control command to fetch a local service descriptor from the
service descriptor cache. The local service descriptor cache is
referenced by the onion address of the service.
This control command is documented in the control spec.
When this is set, and Tor is running as a relay, it will not
generate or load its secret identity key. You can manage the secret
identity key with --keygen. Implements ticket 16944.
Apparently this only happens with clang (or with some particular
clang versions), and only on i386.
Fixes 16970; bug not in any released Tor.
Found by Teor; fix from Yawning.
In a nutshell, since a circuit can not exit at its entry point, it's very
easy for an attacker to find the hidden service guard if only one EntryNodes
is specified since for that guard, the HS will refuse to build a rendezvous
circuit to it.
For now, the best solution is to stop tor to allow a single EntryNodes for
an hidden service.
Fixes#14917
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Only applies to connections with SOCKS auth set, so that non-web Tor
activity is not affected.
Simpler version of Nick's patch because the randomness worried me, and I'm not
otherwise sure why we want a max here.
Make "bridges+hs" the default test network. This tests almost all
tor functionality during make test-network, while allowing tests
to succeed on non-IPv6 systems.
Requires chutney commit 396da92 in test-network-bridges-hs.
Closes tickets 16945 (tor), 16946 (chutney) . Patches by "teor".
In validate_recommended_package_line, at this point in the function,
n_entries is always >= 1. Coverity doesn't like us checking it for
0.
CID 1268063.
Removes a check to PublishHidServDescriptors in
rend_consider_services_upload(). This allows descriptors to be
generated and stored in the local cache when PublishHidServDescriptor = 0.
Keep the PublishHidServDescriptors option check in
rend_consider_descriptor_republication(). We will never need to republish
a descriptor if we are not publishing descriptors to the HSDirs.
Service descriptors are now generated regardless of the the
PublishHidServDescriptors option. The generated descriptors are stored
in the service descriptor cache.
The PublishHidServDescriptors = 1 option now prevents descriptor
publication to the HSDirs rather than descriptor generation.
Deindent a block of code inside the PublishHidServDescriptors option
check in upload_service_descriptor(). Stylistic commit to make the
subsequent reworking of this code cleaner.
The HS_DESC CREATED event should be emmited when a new service descriptor
is generated for a local rendevous service. This event is documented
in the control spec.
This commit resolves ticket #16291.
Adds a service descriptor cache which is indexed by service ID. This
descriptor cache is used to store service descriptors generated by a
local rendevous service.
The service-side cach can be queried by calling rend_cache_lookup_entry()
with the 'service' argument set to 1.
We don't want to accept any work after one of our worker functions has
returned WQ_RPL_SHUTDOWN. This testcase currently fails, because we do
not actually stop any of the worker threads.
