The right way to set "MaxOnionsPending" was to adjust it until the
processing delay was appropriate. So instead, let's measure how long
it takes to process onionskins (sampling them once we have a big
number), and then limit the queue based on its expected time to
finish.
This change is extra-necessary for ntor, since there is no longer a
reasonable way to set MaxOnionsPending without knowing what mix of
onionskins you'll get.
This patch also reserves 1/3 of the onionskin spots for ntor
handshakes, on the theory that TAP handshakes shouldn't be allowed to
starve their speedier cousins. We can change this later if need be.
Resolves 7291.
Our old warn_nonlocal_client_ports() would give a bogus warning for
every nonlocal port every time it parsed any ports at all. So if it
parsed a nonlocal socksport, it would complain that it had a nonlocal
socksport...and then turn around and complain about the nonlocal
socksport again, calling it a nonlocal transport or nonlocal dnsport,
if it had any of those.
Fixes bug 7836; bugfix on 0.2.3.3-alpha.
With an IPv6 virtual address map, we can basically hand out a new
IPv6 address for _every_ address we connect to. That'll be cool, and
will let us maybe get around prop205 issues.
This uses some fancy logic to try to make the code paths in the ipv4
and the ipv6 case as close as possible, and moves to randomly
generated addresses so we don't need to maintain those stupid counters
that will collide if Tor restarts but apps don't.
Also has some XXXX items to fix to make this useful. More design
needed.
This function gives us a single place to set reasonable default flags
for port_cfg_t entries, to avoid bugs like the one where we weren't
setting ipv4_traffic_ok to 1 on SocksPorts initialized in an older
way.
(This is part 1 of making DNS cache use enabled/disabled on a
per-client port basis. These options are shuffled around correctly,
but don't do anything yet.)
Turns out there's more than one way to block a tagged circuit.
This seems to successfully handle all of the normal exit circuits. Hidden
services need additional tweaks, still.
This replaces the old FallbackConsensus notion, and should provide a
way -- assuming we pick reasonable nodes! -- to give clients
suggestions of placs to go to get their first consensus.
Now creating a dir_server_t and adding it are separate functions, and
there are frontend functions for adding a trusted dirserver and a
fallback dirserver.
We use trusted_dir_server_t for two pieces of functionality: a list of
all directory authorities, and a list of initial places to look for
a directory. With this patch we start to separate those two roles.
There is as of now no actual way to be a fallback directory without being
an authority.
Looks like when i was writing the code to set the ipv4_traffic flag on
port_cfg_t, I missed some cases, such as the one where the port was
set from its default value.
Fix for 7493. Bug not in any released Tor.
These options are for telling the SOCKSPort that it should allow or
not allow connections to IPv4/IPv6 addresses.
These aren't implemented yet; this is just the code to read the
options and get them into the entrey_connection_t.
By default, "*" means "All IPv4 addresses" with
tor_addr_parse_mask_ports, so I won't break anything. But if the new
EXTENDED_STAR flag is provided, then * means "any address", *4 means
"any IPv4 address" (that is, 0.0.0.0/0), and "*6" means "any IPv6
address" (that is, [::]/0).
This is going to let us have a syntax for specifying exit policies in
torrc that won't drive people mad.
Also, add a bunch of unit tests for tor_addr_parse_mask_ports to test
these new features, and to increase coverage.
Instead of warning about low ports that are advertised, we should have
been warning about low ports that we're listening on. Bug 7285, fix
on 0.2.3.9-alpha.
Conflicts:
src/or/circuitbuild.c
The conflict was trivial, since no line of code actually changed in
both branches: There was a fmt_addr() that turned into fmt_addrport()
in bug7011, and a "if (!n_conn)" that turned into "if (!n_chan)" in
master.
This is mostly a conversion from this pattern:
log("... %s:%d ...", fmt_and_decorate_addr(&addr), port);
to this:
log("... %s ...", fmt_addrport(&addr, port));
The output is the same in all cases.
we can turn it into an autobool later if we have some way for it
to make a decision.
(patch possibly got lost when nickm merged #6770; or maybe nickm meant
for it to be this way. i'm not sure.)
See #4771 for rationale.
Note that this patch does not take suggested changes in #4470 into
account and keeps treating AuthDirHasIPv6Connectivity as an
AUTOBOOL. Thus, bug fixes for that are included here as well.
This is a fix on master, unreleased as of now.
Add ClientUseIPv6 and ClientPreferIPv6ORPort configuration options.
Use "preferred OR port" for all entry nodes, not only for bridges.
Mark bridges with "prefer IPv6 OR port" if an IPv6 address is
configured in Bridge line and ClientPreferIPv6ORPort is set.
Mark relays with "prefer IPv6 OR port" if an IPv6 address is found in
descriptor and ClientPreferIPv6ORPort is set.
Filter "preferred OR port" through the ClientUseIPv6 config option. We
might want to move this test to where actual connection is being set
up once we have a fall back mechanism in place.
Have only non-servers pick an IPv6 address for the first hop: We
don't want relays to connect over IPv6 yet. (IPv6 has never been used
for second or third hops.)
Implements ticket 5535.
This is important, since otherwise an attacker can use timing info
to probe the internal network.
Also, add an option (ExtendAllowPrivateAddresses) so that
TestingTorNetwork won't break.
Fix for bug 6710; bugfix on all released versions of Tor.
This patch extracts the inner part of config_register_addressmaps --
the part that knows about detecting wildcard addresses addresses --
and makes it into a new function. The new function is deliberately
not moved or reindented, so that the diff is smaller.
I need this to fix bug 6244.
Thanks to the changes we started making with SocksPort and friends
in 0.2.3.3-alpha, any of our code that did "if (options->Sockport)"
became wrong, since "SocksPort 0" would make that test true whereas
using the default SocksPort value would make it false. (We didn't
actually do "if (options->SockPort)" but we did have tests for
TransPort. When we moved DirPort, ORPort, and ControlPort over to
the same system in 0.2.3.9-alpha, the problem got worse, since our
code is littered with checks for DirPort and ORPort as booleans.
This code renames the current linelist-based FooPort options to
FooPort_lines, and adds new FooPort_set options which get set at
parse-and-validate time on the or_options_t. FooPort_set is true
iff we will actually try to open a listener of the given type. (I
renamed the FooPort options rather than leave them alone so that
every previous user of a FooPort would need to get inspected, and so
that any new code that forgetfully uses FooPort will need fail to
compile.)
Fix for bug 6507.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
The SMARTLIST_FOREACH macro is more convenient than BEGIN/END when
you have a nice short loop body, but using it for long bodies makes
your preprocessor tell the compiler that all the code is on the same
line. That causes grief, since compiler warnings and debugger lines
will all refer to that one line.
So, here's a new style rule: SMARTLIST_FOREACH blocks need to be
short.
The defense counts the circuit failure rate for each guard for the past N
circuits. Failure is defined as the ability to complete a first hop, but not
finish completing the circuit all the way to the exit.
If the failure rate exceeds a certain amount, a notice is emitted.
If it exceeds a greater amount, a warn is emitted and the guard is disabled.
These values are governed by consensus parameters which we intend to tune as
we perform experiments and statistical simulations.
From what I can tell, this configuration is usually a mistake, and
leads people to think that all their traffic is getting proxied when
in fact practically none of it is. Resolves the issue behind "bug"
4663.
The function is not guaranteed to NUL-terminate its output. It
*is*, however, guaranteed not to generate more than two bytes per
multibyte character (plus terminating nul), so the general approach
I'm taking is to try to allocate enough space, AND to manually add a
NUL at the end of each buffer just in case I screwed up the "enough
space" thing.
Fixes bug 5909.
This feature can make Tor relays less identifiable by their use of the
mod_ssl DH group, but at the cost of some usability (#4721) and bridge
tracing (#6087) regressions.
We should try to turn this on by default again if we find that the
mod_ssl group is uncommon and/or we move to a different DH group size
(see #6088). Before we can do so, we need a fix for bugs #6087 and
Resolves ticket #5598 for now.
These stats are currently discarded, but we might as well
hard-disable them on bridges, to be clean.
Fix for bug 5824; bugfix on 0.2.1.17-rc.
Patch originally by Karsten Loesing.
Also, try to resolve some doxygen issues. First, define a magic
"This is doxygen!" macro so that we take the correct branch in
various #if/#else/#endifs in order to get the right documentation.
Second, add in a few grouping @{ and @} entries in order to get some
variables and fields to get grouped together.
Roger explains at
http://archives.seul.org/tor/talk/Nov-2011/msg00209.html :
"If you list your bridge as part of your family in the relay
descriptor, then everybody can learn your bridge fingerprint, and
they can look up your bridge's descriptor (and thus location) at
the bridge directory authority."
Now, we can't stop relays from listing bridges, but we can warn when
we notice a bridge listing anybody, which might help some.
This fixes bug 4657; it's a fix on 0.2.0.3-alpha, where bridges were
first introduced.
Previously, we skipped everything that got invoked from
options_init_from_torrc. But some of the stuff in
options_act_reversible and options_act is actually important, like
reopening the logs.
Now, a SIGHUP always makes the effects of an options_set() happen,
even though the options haven't changed.
Fix for bug 5095; bugfix on 0.2.1.9-alpha, which introduced
__ReloadTorrcOnSIGHUP.
Instead, allow packagers to put a 'TOR_BUILD_TAG' field in the
server descriptor to indicate a platform-specific value, if they
need to. (According to weasel, this was his use for the git- tag
previously.)
This is part of 2988
* Document fmt_addr_impl() and friends.
* Parenthesize macro arguments.
* Rename get_first_listener_addrport_for_pt() to
get_first_listener_addrport_string().
* Handle port_cfg_t with no_listen.
* Handle failure of router_get_active_listener_port_by_type().
* Add an XXX to router_get_active_listener_port_by_type().
This is just refactoring work here. The old logic was kind of
convoluted, especially after the bug 5572 fix. We don't actually need to
distinguish so many cases here. Dropping detection of the
"!old_options || !old_options->DynamicDHGroups" case is fine because
that's the same that we'd do for clients.
Also add a changes file for bug 5572.
This fixes a side-channel attack on the (fortunately unused!)
BridgePassword option for bridge authorities. Fix for bug 5543;
bugfix on 0.2.0.14-alpha.
Introduce get_first_listener_addrport_for_pt() which returns a string
containing the addrport of the first listener we could find. Use it to
form the TOR_PT_ORPORT managed proxy protocol line.
This commit is completely mechanical; I used this perl script to make it:
#!/usr/bin/perl -w -i.bak -p
if (/^\s*\#/) {
s/MS_WINDOWS/_WIN32/g;
s/\bWIN32\b/_WIN32/g;
}
These were found by looking for tor_snprintf() instances that were
preceeded closely by tor_malloc(), though I probably converted some
more snprintfs as well.
(In every case, make sure that the length variable (if any) is
removed, renamed, or lowered, so that anything else that might have
assumed a longer buffer doesn't exist.)
These were found by looking for tor_snprintf() instances that were
followed closely by tor_strdup(), though I probably converted some
other snprintfs as well.
(To ensure correctness, in every case, make sure that the temporary
variable is deleted, renamed, or lowered in scope, so we can't have
any bugs related to accidentally relying on the no-longer-filled
variable.)
The Tor2webMode torrc option is still required to run a Tor client in
'tor2web mode', but now it can't be turned on at runtime in a normal build
of Tor. (And a tor2web build of Tor can't be used as a normal Tor client,
so we don't have to worry as much about someone distributing packages with
this particular pistol accessible to normal users.)
It might be nice to support this someday, but for now it would fail
with an infinite remap cycle. (If I say "remap * *.foo.exit",
then example.com ->
example.com.foo.exit ->
example.com.foo.exit.foo.exit ->
example.com.foo.exit.foo.exit.foo.exit -> ...)
In this new representation for wildcarded addresses, there are no
longer any 'magic addresses': rather, "a.b c.d", "*.a.b c.d" and
"*.a.b *.c.d" are all represented by a mapping from "a.b" to "c.d". we
now distinguish them by setting bits in the addressmap_entry_t
structure, where src_wildcard is set if the source address had a
wildcard, and dst_wildcard is set if the target address had a
wildcard.
This lets the case where "*.a.b *.c.d" or "*.a.b c.d" remap the
address "a.b" get handled trivially, and lets us simplify and improve
the addressmap_match_superdomains implementation: we can now have it
run in O(parts of address) rather than O(entries in addressmap).
1. Only allow '*.' in MapAddress expressions. Ignore '*ample.com' and '.example.com'.
This has resulted in a slight refactoring of config_register_addressmaps.
2. Add some more detail to the man page entry for AddressMap.
3. Fix initialization of a pointer to NULL rather than 0.
4. Update the unit tests to cater for the changes in 1 and test more explicitly for
recursive mapping.
1. Implement the following mapping rules:
MapAddress a.b.c d.e.f # This is what we have now
MapAddress .a.b.c d.e.f # Replaces any address ending with .a.b.c with d.e.f
MapAddress .a.b.c .d.e.f # Replaces the .a.b.c at the end of any addr with .d.e.f
(Note that 'a.b.c .d.e.f' is invalid, and will be rejected.)
2. Add tests for the new rules.
3. Allow proper wildcard annotation, i.e. '*.d.e' '.d.e' will still work.
4. Update addressmap_entry_t with an is_wildcard member.
This code handles the new ORPort options, and incidentally makes all
remaining port types use the new port configuration systems.
There are some rough edges! It doesn't do well in the case where your
Address says one thing but you say to Advertise another ORPort. It
doesn't handle AllAddrs. It doesn't actually advertise anything besides
the first listed advertised IPv4 ORPort and DirPort. It doesn't do
port forwarding to them either.
It's not tested either, it needs more documentation, and it probably
forgets to put the milk back in the refrigerator.
Some controllers want this so they can mess with Tor's configuration
for a while via the control port before actually letting Tor out of
the house.
We do this with a new DisableNetwork option, that prevents Tor from
making any outbound connections or binding any non-control
listeners. Additionally, it shuts down the same functionality as
shuts down when we are hibernating, plus the code that launches
directory downloads.
To make sure I didn't miss anything, I added a clause straight to
connection_connect, so that we won't even try to open an outbound
socket when the network is disabled. In my testing, I made this an
assert, but since I probably missed something, I've turned it into a
BUG warning for testing.
This will mainly help distributors by giving a way to set system or package
defaults that a user can override, and that a later package can replace.
No promises about the particular future location or semantics for this:
we will probably want to tweak it some before 0.2.3.x-rc
The file is searched for in CONFDIR/torrc-defaults , which can be
overridden with the "--defaults-torrc" option on the command line.
This starts an effort to refactor torrc handling code to make it easier
to live with. It makes it possible to override exit policies from the
command line, and possible to override (rather than append to) socksport
lists from the command line.
It'll be necessary to make a "base" torrc implementation work at all.
Instead of only writing the dynamic DH prime modulus to a file, write
the whole DH parameters set for forward compatibility. At the moment
we only accept '2' as the group generator.
The DH parameters gets stored in base64-ed DER format to the
'dynamic_dh_params' file.
We used to do init_keys() if DynamicDHGroups changed after a HUP, so
that the dynamic DH modulus was stored on the disk. Since we are now
doing dynamic DH modulus storing in crypto.c, we can simply initialize
the TLS context and be good with it.
Introduce a new function router_initialize_tls_context() which
initializes the TLS context and use it appropriately.
Completely disable stats if we aren't running as a relay. We won't
collect any anyway, so setting up the infrastructure for them and
logging about them is wrong. This also removes a confusing log
message that clients without a geoip db would have seen.
Fixes bug 4353.
When running with IOCP, we are in theory able to use userspace-
allocated buffers to avoid filling up the stingy amount of kernel
space allocated for sockets buffers.
The bufferevent_async implementation in Libevent provides this
ability, in theory. (There are likely to be remaining bugs). This
patch adds a new option that, when using IOCP bufferevents, sets
each socket's send and receive buffers to 0, so that we should use
this ability.
When all the bugs are worked out here, if we are right about bug 98,
this might solve or mitigate bug 98.
This option is experimental and will likely require lots of testing
and debugging.
This way, all of the DA operators can upgrade immediately, without nuking
every client's set of entry guards as soon as a majority of them upgrade.
Until enough guards have upgraded, a majority of dirauths should set this
config option so that there are still enough guards in the network. After
a few days pass, all dirauths should use the default.
This is used for the bridge authority currently, to get a better
intuition on how many descriptors are actually fetched from it and how
many fetches happen in total.
Implements ticket 4200.
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Without this patch, Tor wasn't sure whether it would be hibernating or
not, so it postponed opening listeners until after the privs had been
dropped. This doesn't work so well for low ports. Bug was introduced in
the fix for bug 2003. Fixes bug 4217, reported by Zax and katmagic.
Thanks!
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
This is the cherry-picked 499661524b.
With managed proxies you would always get the error message:
"You have a Bridge line using the X pluggable transport, but there
doesn't seem to be a corresponding ClientTransportPlugin line."
because the check happened directly after parse_client_transport_line()
when managed proxies were not fully configured and their transports
were not registered.
The fix is to move the validation to run_scheduled_events() and make
sure that all managed proxies are configured first.
* Create mark/sweep functions for transports.
* Create a transport_resolve_conflicts() function that tries to
resolve conflicts when registering transports.
Previously the FooPort was ignored and the default used instead,
causing Tor to bind to the wrong port if FooPort and the default
port don't match or the CONN_TYPE_FOO_LISTENER has no default port.
Fixes#3936.
* Use strcmpstart() instead of strcmp(x,y,strlen(y)).
* Warn the user if the managed proxy failed to launch.
* Improve function documentation.
* Use smartlist_len() instead of n_unconfigured_proxies.
* Split managed_proxy_destroy() to managed_proxy_destroy()
and managed_proxy_destroy_with_transports().
* Constification.
One-hop dirconn streams all share a session group, and get the
ISO_SESSIONGRP flag: they may share circuits with each other and
nothing else.
Anonymized dirconn streams get a new internal-use-only ISO_STREAM
flag: they may not share circuits with anything, including each other.
This is mainly meant as a way to keep clients from accidentally
DOSing themselves by (e.g.) enabling IsolateDestAddr or
IsolateDestPort on a port that they use for HTTP.
This patch adds fields to track how streams should be isolated, and
ensures that those fields are set correctly. It also adds fields to
track what streams can go on a circuit, and adds functions to see
whether a streams can go on a circuit and update the circuit
accordingly. Those functions aren't yet called.
Proposal 171 gives us a new syntax for parsing client port options.
You can now have as many FooPort options as you want (for Foo in
Socks, Trans, DNS, NATD), and they can have address:port arguments,
and you can specify the level of isolation on those ports.
Additionally, this patch refactors the client port parsing logic to
use a new type, port_cfg_t. Previously, ports to be bound were
half-parsed in config.c, and later re-parsed in connection.c when
we're about to bind them. Now, parsing a port means converting it
into a port_cfg_t, and binding it uses only a port_cfg_t, without
needing to parse the user-provided strings at all.
We should do a related refactoring on other port types. For
control ports, that'll be easy enough. For ORPort and DirPort,
we'll want to do this when we solve proposal 118 (letting servers
bind to and advertise multiple ports).
This implements tickets 3514 and 3515.
Previously, we'd get a new descriptor for free when
public_server_mode() changed, since it would count as
affects_workers, which would call init_keys(), which would make us
regenerate a new descriptor. But now that we fixed bug 3263,
init_keys() is no longer necessarily a new descriptor, and so we
need to make sure that public_server_mode() counts as a descriptor
transition.
- const-ify some transport_t pointers
- Remove a vestigial argument to parse_bridge_line
- Make it compile without warnings on my laptop with
--enable-gcc-warnings
Multiple Bridge lines can point to the same one ClientTransportPlugin
line, and we can have multiple ClientTransportPlugin lines in our
configuration file that don't match with a bridge. We also issue a
warning when we have a Bridge line with a pluggable transport but we
can't match it to a ClientTransportPlugin line.
This lets us make a lot of other stuff const, allows the compiler to
generate (slightly) better code, and will make me get slightly fewer
patches from folks who stick mutable stuff into or_options_t.
const: because not every input is an output!
Original message from bug3393:
check_private_dir() to ensure that ControlSocketsGroupWritable is
safe to use. Unfortunately, check_private_dir() only checks against
the currently running user… which can be root until privileges are
dropped to the user and group configured by the User config option.
The attached patch fixes the issue by adding a new effective_user
argument to check_private_dir() and updating the callers. It might
not be the best way to fix the issue, but it did in my tests.
(Code by lunar; changelog by nickm)
* Improved function documentation.
* Renamed find_bridge_transport_by_addrport() to
find_transport_by_bridge_addrport().
* Sanitized log severities we use.
* Ran check-spaces.
UseBridges 1 now means "connect only to bridges; if you know no
bridges, don't make connections." UseBridges auto means "Use bridges
if they are known, and we have no EntryNodes set, and we aren't a
server." UseBridges 0 means "don't use bridges."
If set to 1, Tor will attempt to prevent basic debugging
attachment attempts by other processes. (Default: 1)
Supports Mac OS X and Gnu/Linux.
Sebastian provided useful feedback and refactoring suggestions.
Signed-off-by: Jacob Appelbaum <jacob@appelbaum.net>
The patch for 3228 made us try to run init_keys() before we had loaded
our state file, resulting in an assert inside init_keys. We had moved
it too early in the function.
Now it's later in the function, but still above the accounting calls.
Previously we did this nearer to the end (in the old_options &&
transition_affects_workers() block). But other stuff cares about
keys being consistent with options... particularly anything which
tries to access a key, which can die in assert_identity_keys_ok().
Fixes bug 3228; bugfix on 0.2.2.18-alpha.
We used to regenerate our descriptor whenever we'd get a sighup. This
was caused by a bug in options_transition_affects_workers() that would
return true even if the options were exactly the same. Down the call
path we'd call init_keys(), which made us make a new descriptor which
the authorities would reject, and the node would subsequently fall out
of the consensus.
This patch fixes only the first part of this bug:
options_transition_affects_workers() behaves correctly now. The second
part still wants a fix.
tor_process_monitor_new can't currently return NULL, but if it ever can,
we want that to be an explicitly fatal error, without relying on the fact
that monitor_owning_controller_process's chain of caller will exit if it
fails.
Bumped the char maximum to 512 for HTTPProxyAuthenticator &
HTTPSProxyAuthenticator. Now stripping all '\n' after base64
encoding in alloc_http_authenticator.
When running a system-wide instance of Tor on Unix-like systems, having
a ControlSocket is a quite handy mechanism to access Tor control
channel. But it would be easier if access to the Unix domain socket can
be granted by making control users members of the group running the Tor
process.
This change introduces a UnixSocketsGroupWritable option, which will
create Unix domain sockets (and thus ControlSocket) 'g+rw'. This allows
ControlSocket to offer same access control measures than
ControlPort+CookieAuthFileGroupReadable.
See <http://bugs.debian.org/552556> for more details.
This code changes it so that we don't remove bridges immediately when
we start re-parsing our configuration. Instead, we mark them all, and
remove all the marked ones after re-parsing our bridge lines. As we
add a bridge, we see if it's already in the list. If so, we just
unmark it.
This new behavior will lose the property we used to have that bridges
were in bridge_list in the same order in which they appeared in the
torrc. I took a quick look through the code, and I'm pretty sure we
didn't actually depend on that anywhere.
This is for bug 3019; it's a fix on 0.2.0.3-alpha.
Previously, if they changed in torrc during a SIGHUP, all was well,
since we would just clear all transient entries from the addrmap
thanks to bug 1345. But if you changed them from the controller, Tor
would leave old mappings in place.
The VirtualAddrNetwork bug has been here since 0.1.1.19-rc; the
AutomapHosts* bug has been here since 0.2.0.1-alpha.
This bug couldn't happen when TrackExitHosts changed in torrc, since
the SIGHUP to reload the torrc would clear out all the transient
addressmap entries before. But if you used SETCONF to change
TrackExitHosts, old entries would be left alone: that's a bug, and so
this is a bugfix on Tor 0.1.0.1-rc.
We'll eventually want to do more work here to make sure that the ports
are stable over multiple invocations. Otherwise, turning your node on
and off will get you a new DirPort/ORPort needlessly.
The new behavior is to try to rename the old file if there is one there
that we can't read. In all likelihood, that will fail too, but at least
we tried, and at least it won't crash.
To turn this on, set UseMicrodescriptors to "1" (or "auto" if you
want it on-if-you're-a-client). It should go auto-by-default once
0.2.3.1-alpha is released.
Because of our node logic, directory caches will never use
microdescriptors when they have the right routerinfo available.
Clients and relays haven't used them since early 0.2.0.x. The only
remaining use by authorities learning about new relays ahead of scedule;
see proposal 147 for what we intend to do about that.
We're leaving in an option (FetchV2Networkstatus) to manually fetch v2
networkstatuses, because apparently dnsel and maybe bwauth want them.
This fixes bug 3022.
A v0 HS authority stores v0 HS descriptors in the same descriptor
cache that its HS client functionality uses. Thus, if the HS
authority operator clears its client HS descriptor cache, ALL v0
HS descriptors will be lost. That would be bad.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
IOW, if we were using TrackExitHosts, and we added an excluded node or
removed a node from exitnodes, we wouldn't actually remove the mapping
that points us at the new node.
Also, note with an XXX022 comment a place that I think we are looking
at the wrong string.
The routerset_equal function explicitly handles NULL inputs, so
there's no need to check inputs for NULL before calling it.
Also fix a bug in routerset_equal where a non-NULL routerset with no
entries didn't get counted as equal to a NULL routerset. This was
untriggerable, I think, but potentially annoying down the road.
- Document it in the manpage
- Add a changes entry
- No need to log when it is set: we don't log for other options.
- Use doxygen to document the new flag.
- Test truth of C variables with "if (x)", not "if (x == 1)".
- Simplify a complex boolean expression by breaking it up.
Partial backport of daa0326aaa .
Resolves bug 2402. Bugfix on 0.2.1.15 (for the part where we switched to
git) and on 0.2.1.30 (for the part where we dumped micro-revisions.)
In private networks, the defaults for some options are changed. This
means that in options_validate(), where we're testing that the defaults
are what we think they are, we fail. Use a workaround by setting a
hidden configuration option _UsingTestingTorNetwork when we have altered
the configuration this way, so that options_validate() can do the right
thing.
Fixes bug 2250, bugfix on 0.2.1.2-alpha (the version introducing private
network options).
Sets:
* Documentation
* Logging domain
* Configuration option
* Scheduled event
* Makefile
It also creates status.c and the log_heartbeat() function.
All code was written by Sebastian Hahn. Commit message was
written by me (George Kadianakis).
It is often not entirely clear what options Tor was built with, so it
might not be immediately obvious which config file Tor is using when it
found one. Log the config file at startup.
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
When we stopped using svn, 0.2.1.x lost the ability to notice its svn
revision and report it in the version number. However, it kept
looking at the micro-revision.i file... so if you switched to master,
built tor, then switched to 0.2.1.x, you'd get a micro-revision.i file
from master reported as an SVN tag. This patch takes out the "include
the svn tag" logic entirely.
Bugfix on 0.2.1.15-rc; fixes bug 2402.
Our public key functions assumed that they were always writing into a
large enough buffer. In one case, they weren't.
(Incorporates fixes from sebastian)
Right now, Tor routers don't save the maxima values from the
bw_history_t between sessions. That's no good, since we use those
values to determine bandwidth. This code adds a new BWHist.*Maximum
set of values to the state file. If they're not present, we estimate
them by taking the observed total bandwidth and dividing it by the
period length, which provides a lower bound.
This should fix bug 1863. I'm calling it a feature.
If a SOCKS5 client insists on authentication, allow it to
negotiate a connection with Tor's SOCKS server successfully.
Any credentials the client provides are ignored.
This allows Tor to work with SOCKS5 clients that can only
support 'authenticated' connections.
Also add a bunch of basic unit tests for SOCKS4/4a/5 support
in buffers.c.
We had a spelling discrepancy between the manpage and the source code
for some option. Resolve these in favor of the manpage, because it
makes more sense (for example, HTTP should be capitalized).
The code that makes use of the RunTesting option is #if 0, so setting
this option has no effect. Mark the option as obsolete for now, so that
Tor doesn't list it as an available option erroneously.
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
We need filtering bufferevent_openssl so that we can wrap around
IOCP bufferevents on Windows. This patch adds a temporary option to
turn on filtering mode, so that we can test it out on non-IOCP
systems to make sure it hasn't got any surprising bugs.
It also fixes some allocation/teardown errors in using
bufferevent_openssl as a filter.
Instead of rejecting a value that doesn't divide into 1 second, round to
the nearest divisor of 1 second and warn.
Document that the option only controls the granularity written by Tor to a
file or console log. It does not (for example) "batch up" log messages to
affect times logged by a controller, times attached to syslog messages, or
the mtime fields on log files.
Also, make the NodeFamily option into a list of routersets. This
lets us git rid of router_in_nickname_list (or whatever it was
called) without porting it to work with nodes, and also lets people
specify country codes and IP ranges in NodeFamily
This is needed for IOCP, since telling the IOCP backend about all
your CPUs is a good idea. It'll also come in handy with asn's
multithreaded crypto stuff, and for people who run servers without
reading the manual.
This requires the latest Git version of Libevent as of 24 March 2010.
In the future, we'll just say it requires Libevent 2.0.5-alpha or
later.
Since Libevent doesn't yet support hierarchical rate limit groups,
there isn't yet support for tracking relayed-bytes separately when
using the bufferevent system. If a future version does add support
for hierarchical buckets, we can add that back in.
The RefuseUnknownExits config option is now a tristate, with "1"
meaning "enable it no matter what the consensus says", "0" meaning
"disable it no matter what the consensus says", and "auto" meaning "do
what the consensus says". If the consensus is silent, we enable
RefuseUnknownExits.
This patch also changes the dirserv logic so that refuseunknownexits
won't make us cache unless we're an exit.
Previously, we were also considering the time spent in
soft-hibernation. If this was a long time, we would wind up
underestimating our bandwidth by a lot, and skewing our wakeup time
towards the start of the accounting interval.
This patch also makes us store a few more fields in the state file,
including the time at which we entered soft hibernation.
Fixes bug 1789. Bugfix on 0.0.9pre5.
This should keep WinCE working (unicode always-on) and get Win98
working again (unicode never-on).
There are two places where we explicitly use ASCII-only APIs, still:
in ntmain.c and in the unit tests.
This patch also fixes a bug in windoes tor_listdir that would cause
the first file to be listed an arbitrary number of times that was
also introduced with WinCE support.
Should fix bug 1797.
Setting CookieAuthFileGroupReadable but without setting CookieAuthFile makes
no sense, because unix directory permissions for the data directory prevent
the group from accessing the file anyways.
With this patch we stop scheduling when we should write statistics using a
single timestamp in run_scheduled_events(). Instead, we remember when a
statistics interval starts separately for each statistic type in geoip.c
and rephist.c. Every time run_scheduled_events() tries to write stats to
disk, it learns when it should schedule the next such attempt.
This patch also enables all statistics to be stopped and restarted at a
later time.
This patch comes with a few refactorings, some of which were not easily
doable without the patch.
It's okay to get (say) a SocksPort line in the torrc, and then a
SocksPort on the command line to override it, and then a SocksPort via
a controller to override *that*. But if there are two occurrences of
SocksPort in the torrc, or on the command line, or in a single SETCONF
command, then the user is likely confused. Our old code would not
help unconfuse the user, but would instead silently ignore all but
the last occurrence.
This patch changes the behavior so that if the some option is passed
more than once to any torrc, command line, or SETCONF (each of which
coincidentally corresponds to a call to config_assign()), and the
option is not a type that allows multiple occurrences (LINELIST or
LINELIST_X), then we can warn the user.
This closes trac entry 1384.
Right now it says "552 internal error" because there's no way for
getinfo_helper_*() countries to specify an error message. This
patch changes the getinfo_helper_*() interface, and makes most of the
getinfo helpers give useful error messages in response to failures.
This should prevent recurrences of bug 1699, where a missing GeoIPFile
line in the torrc made GETINFO ip-to-county/* fail in a "not obvious
how to fix" way.
We need to record different statistics at point of timeout, vs the point
of forcible closing.
Also, give some better names to constants and state file variables
to indicate they are not dealing with timeouts, but abandoned circuits.
Most of the changes here are switches to use APIs available on Windows
CE. The most pervasive change is that Windows CE only provides the
wide-character ("FooW") variants of most of the windows function, and
doesn't support the older ASCII verions at all.
This patch will require use of the wcecompat library to get working
versions of the posix-style fd-based file IO functions.
[commit message by nickm]
There are now four ways that CBT can be disabled:
1. Network-wide, with the cbtdisabled consensus param.
2. Via config, with "LearnCircuitBuildTimeout 0"
3. Via config, with "AuthoritativeDirectory 1"
4. Via a state file write failure.
From http://archives.seul.org/tor/relays/Mar-2010/msg00006.html :
As I understand it, the bug should show up on relays that don't set
Address to an IP address (so they need to resolve their Address
line or their hostname to guess their IP address), and their
hostname or Address line fails to resolve -- at that point they'll
pick a random 4 bytes out of memory and call that their address. At
the same time, relays that *do* successfully resolve their address
will ignore the result, and only come up with a useful address if
their interface address happens to be a public IP address.
All other bandwidthrate settings are restricted to INT32_MAX, but
this check was forgotten for PerConnBWRate and PerConnBWBurst. Also
update the manpage to reflect the fact that specifying a bandwidth
in terabytes does not make sense, because that value will be too
large.
On Windows, we don't have a notion of ~ meaning "our homedir", so we
were deliberately using an #ifdef to avoid calling expand_filename()
in multiple places. This is silly: The right place to turn a function
into a no-op on a single platform is in the function itself, not in
every single call-site.
Tor has tor_lookup_hostname(), which prefers ipv4 addresses automatically.
Bug 1244 occured because gethostbyname() returned an ipv6 address, which
Tor cannot handle currently. Fixes bug 1244; bugfix on 0.0.2pre25.
Reported by Mike Mestnik.
Specifically, there are two cases: a) are we willing to start a new
circuit at a node not in your ExitNodes config option, and b) are we
willing to make use of a circuit that's already established but has an
unsuitable exit.
Now we discard all your circuits when you set ExitNodes, so the only
way you could end up with an exit circuit that ends at an unsuitable
place is if we explicitly ran out of exit nodes, StrictNodes was 0,
and we built this circuit to solve a stream that needs solving.
Fixes bug in dc322931, which would ignore the just-built circuit because
it has an unsuitable exit.
The HSAuthorityRecordStats option was used to track statistics of overall
hidden service usage on the version 0 hidden service authorities. With the
version 2 hidden service directories being deployed and version 0
descriptors being phased out, these statistics are not as useful anymore.
Goodbye, you fine piece of software; my first major code contribution to
Tor.
The new rule is: safe_str_X() means "this string is a piece of X
information; make it safe to log." safe_str() on its own means
"this string is a piece of who-knows-what; make it safe to log".
The rule is now: take the value from the CircuitPriorityHalflife
config option if it is set. If it zero, disable the cell_ewma
algorithm. If it is set, use it to calculate the scaling factor.
If it is not set, look for a CircPriorityHalflifeMsec parameter in the
consensus networkstatus. If *that* is zero, then disable the cell_ewma
algorithm; if it is set, use it to calculate the scaling factor.
If it is not set at all, disable the algorithm.
There are two big changes here:
- We store active circuits in a priority queue for each or_conn,
rather than doing a linear search over all the active circuits
before we send each cell.
- Rather than multiplying every circuit's cell-ewma by a decay
factor every time we send a cell (thus normalizing the value of a
current cell to 1.0 and a past cell to alpha^t), we instead
only scale down the cell-ewma every tick (ten seconds atm),
normalizing so that a cell sent at the start of the tick has
value 1.0).
Each circuit is ranked in terms of how many cells from it have been
relayed recently, using a time-weighted average.
This patch has been tested this on a private Tor network on PlanetLab,
and gotten improvements of 12-35% in time it takes to fetch a small
web page while there's a simultaneous large data transfer going on
simultaneously.
[Commit msg by nickm based on mail from Ian Goldberg.]
Some *_free functions threw asserts when passed NULL. Now all of them
accept NULL as input and perform no action when called that way.
This gains us consistence for our free functions, and allows some
code simplifications where an explicit null check is no longer necessary.
New config option "CircuitStreamTimeout" to override our internal
timeout schedule for how many seconds until we detach a stream from
a circuit and try a new circuit. If your network is particularly
slow, you might want to set this to a number like 60.
This commit implements a new config option: 'DisableAllSwap'
This option probably only works properly when Tor is started as root.
We added two new functions: tor_mlockall() and tor_set_max_memlock().
tor_mlockall() attempts to mlock() all current and all future memory pages.
For tor_mlockall() to work properly we set the process rlimits for memory to
RLIM_INFINITY (and beyond) inside of tor_set_max_memlock().
We behave differently from mlockall() by only allowing tor_mlockall() to be
called one single time. All other calls will result in a return code of 1.
It is not possible to change DisableAllSwap while running.
A sample configuration item was added to the torrc.complete.in config file.
A new item in the man page for DisableAllSwap was added.
Thanks to Moxie Marlinspike and Chris Palmer for their feedback on this patch.
Please note that we make no guarantees about the quality of your OS and its
mlock/mlockall implementation. It is possible that this will do nothing at all.
It is also possible that you can ulimit the mlock properties of a given user
such that root is not required. This has not been extensively tested and is
unsupported. I have included some comments for possible ways we can handle
this on win32.
The code for these was super-wrong, but will only break things when we
reset an option on a platform where sizeof(time_t) is different from
sizeof(int).
We want it to be under our control so it doesn't mess
up initialization. This is likely the cause for
the bug the previous assert-adding commit (09a75ad) was
trying to address.
Using CircuitBuildTimeout is prone to issues with SIGHUP, etc.
Also, shuffle the circuit build times array after loading it
in so that newer measurements don't replace chunks of
similarly timed measurements.
When we added support for fractional units (like 1.5 MB) I broke
support for giving units with no space (like 2MB). This patch should
fix that. It also adds a propoer tor_parse_double().
Fix for bug 1076. Bugfix on 0.2.2.1-alpha.
Note that unlike subversion revision numbers, it isn't meaningful to
compare these for anything but equality. We define a sort-order anyway,
in case one of these accidentally slips into a recommended-versions
list.
Relays no longer publish a new server descriptor if they change
their MaxAdvertisedBandwidth config option but it doesn't end up
changing their advertised bandwidth numbers. Bugfix on 0.2.0.28-rc;
fixes bug 1026. Patch from Sebastian.
Changes to directory request statistics:
- Rename GEOIP statistics to DIRREQ statistics, because they now include
more than only GeoIP-based statistics, whereas other statistics are
GeoIP-dependent, too.
- Rename output file from geoip-stats to dirreq-stats.
- Add new config option DirReqStatistics that is required to measure
directory request statistics.
- Clean up ChangeLog.
Also ensure that entry guards statistics have access to a local GeoIP
database.
This new option will allow clients to download the newest fresh consensus
much sooner than they normally would do so, even if they previously set
FetchDirInfoEarly. This includes a proper ChangeLog entry and an updated man
page.
Added a sanity check in config.c and a check in directory.c
directory_initiate_command_rend() to catch any direct connection attempts
when a socks proxy is configured.
This patch adds a new compat_libevent.[ch] set of files, and moves our
Libevent compatibility and utilitity functions there. We build them
into a separate .a so that nothing else in src/commmon depends on
Libevent (partially fixing bug 507).
Also, do not use our own built-in evdns copy when we have Libevent
2.0, whose evdns is finally good enough (thus fixing Bug 920).
Tas (thanks!) noticed that when *ListenAddress is set, Tor would
still warn on startup when *Port is low and hibernation is active.
The patch parses all the *ListenAddress lines, and checks the
ports. Bugfix on 0.2.1.15-rc
- Write geoip stats to disk every 24 hours, not every hour.
- Remove configuration options and define reasonable defaults.
- Clear history of client requests every 24 hours (which wasn't done at
all before).
Bridges are not supposed to publish router descriptors to the directory
authorities. It defeats the point of bridges when they are included in the
public relay directory.
This patch puts out a warning and exits when the node is configured as
a bridge and to publish v1, v2, or v3 descriptors at the same time.
Also fixes part of bug 932.
This addresses the first part of bug 918. Users are now warned when
they try to use hibernation in combination with a port below 1024
when they're not on Windows. We don't want to die here, because
people might run Tor as root, use a capabilities system or some
other platform that will allow them to re-attach low ports.
Wording suggested by Marian
Now, when you call tor --digests, it dumps the SHA1 digest of each
source file that Tor was built with. We support both 'sha1sum' and
'openssl sha1'. If the user is building from a tarball and they
haven't edited anything, they don't need any program that calculates
SHA1. If they _have_ modified a file but they don't have a program to
calculate SHA1, we try to build so we do not output digests.
bytes (aka 20KB/s), to match our documentation. Also update
directory authorities so they always assign the Fast flag to relays
with 20KB/s of capacity. Now people running relays won't suddenly
find themselves not seeing any use, if the network gets faster
on average.
svn:r19305
It turns out that we weren't updating the _ExcludeExitNodesUnion set's
country numbers when we reloaded (or first loaded!) the IP-to-country
file. Spotted by Lark. Bugfix on 0.2.1.6-alpha.
svn:r18575
are stored when the --enable-local-appdata option is configured. This
changes the Windows path from %APPDATA% to a host local
%USERPROFILE%\Local Settings\Application Data\ path (aka,
LOCAL_APPDATA).
Patch from coderman.
svn:r18122
Unfortunately, old Libevents don't _put_ a version in their headers, so
this can get a little tricky. Fortunately, the only binary-compatibility
issue we care about is the size of struct event. Even more fortunately,
Libevent 2.0 will let us keep binary compatiblity forever by letting us
decouple ourselves from the structs, if we like.
svn:r18014
The subversion $Id$ fields made every commit force a rebuild of
whatever file got committed. They were not actually useful for
telling the version of Tor files in the wild.
svn:r17867
(Many users have no idea what a resolv.conf is, and shouldn't be forced to learn. The old option will keep working for now.)
Also, document it.
svn:r17661
seconds. Warn the user if lower values are given in the
configuration. Bugfix on 0.1.0.1-rc. Patch by Sebastian.
Clip the CircuitBuildTimeout to a minimum of 30 seconds. Warn the
user if lower values are given in the configuration. Bugfix on
0.1.1.17-rc. Patch by Sebastian.
svn:r17657
it's obsolete. which causes us to inform the user every time, even
though the user can't do anything about it other than get confused.
now it's an info-level log by default.
svn:r17206
and fail to start. But dangerous permissions on
$datadir/cached-status/ would cause us to open a log and complain
there. Now complain to stdout and fail to start in both cases. Fixes
bug 820, reported by seeess.
svn:r16998
Initial conversion of uint32_t addr to tor_addr_t addr in connection_t and related types. Most of the Tor wire formats using these new types are in, but the code to generate and use it is not. This is a big patch. Let me know what it breaks for you.
svn:r16435
Patch from Christian Wilms: remove (HiddenService|Rend)(Exclude)?Nodes options. They never worked properly, and nobody seems to be using them. Resolves bug 754.
svn:r16144
Add new ExcludeExitNodes option. Also add a new routerset type to handle Exclude[Exit]Nodes. It is optimized for O(1) membership tests, so as to make choosing a random router run in O(N_routers) time instead of in O(N_routers*N_Excluded_Routers).
svn:r16061
New --hush command-line option similar to --quiet. While --quiet disables all
logging to the console on startup, --hush limits the output to messages of
warning and error severity.
svn:r14222
Fix bug spotted by mwenge: a server_event should not be a sever_event. Also, fix compile errors in config.c and control.c with --enable-gcc-warnings.
svn:r13957
Change options_init_from_string() so that it returns different exit codes in the
error case, depending on what went wrong. Also push the responsibility to log
the error to the caller.
svn:r13947
Part of options_init_from_torrc()'s job was looking for -f flags (to specify
an alternate config file) on the command line, complaining if more than one
is given or the given does not exist. If none is given then use the compiled-in
default location, accepting if it does not exist. This logic has been moved
into its own function in an attemped to make options_init_from_torrc() easier
to deal with.
svn:r13942
Split the argv processing loop into two poarts, one that deals with
figuring out which conffile to use, and the other that figures out
which "command" (hash fingerprint, verify config, list fpr, run tor)
the user asked for.
There is a third part further down that imports command line args
into the config but that is not touched.
svn:r13941
Implement domain-selection for logging. Source is documented; needs documentation in manpage (maybe). For now, see doxygen comment on parse_log_severity_config in log.c
svn:r13875
in options_act() we set running_tor to options->command == CMD_RUN_TOR
once and used that in all but one place. Now we use running_tor in that
place also.
svn:r13819
Do the last part of arma's fix for bug 437: Track the origin of every addrmap, and use this info so we can remove all the trackhostexits-originated mappings for a given exit.
svn:r13660
Apply patch from Sebastian Hahn: stop imposing an arbitrary maximum on the number of file descriptors used for busy servers. Bug reported by Olaf Selke.
svn:r13626
even when the local resolv.conf file is missing, broken, or contains
only unusable nameservers.
Now I can run a local network on my laptop when I'm on an airplane.
svn:r13402
Check for correctness of AuthDir* options in options_validate; check for possible bugs where options_validate() is happy but parse_policies_from_options() is sad.
svn:r13384
Tor can warn and/or refuse connections to ports commonly used with
vulnerable-plaintext protocols.
We still need to figure out some good defaults for them.
svn:r13198
Bugfix on fix for 557: Make values containing special characters work right with getconf, setconf, and saveconf. Document this in control-spec.txt
svn:r13056
Fix bug 579: Count DNSPort and hidden services when checking whether Tor is going to do anything. Change "no configured ports" from fatal to warning.
svn:r13036
Push the strdups used for parsing configuration lines into parse_line_from_string(). This will make it easier to parse more complex value formats, which in turn will help fix bug 557
svn:r13020
create the "cached-status" directory in their datadir. All Tors
used to create it. Bugfix on 0.1.2.x.
Bridge relays with DirPort set to 0 no longer cache v1 or v2
directory information; there's no point. Bugfix on trunk.
svn:r12887
AlternateBridgeAuthority, and AlternateHSAuthority) that let the
user selectively replace the default directory authorities, rather
than the all-or-nothing replacement that DirServer offers.
svn:r12777
authorities to mark certain relays as "bad directories" in the
networkstatus documents. Also supports the "!baddir" directive in
the approved-routers file.
svn:r12754
