Most of these are in somewhat non-obvious code where it is probably
a good idea to initialize variables and add extra assertions anyway.
Closes 13036. Patches from "teor".
Previously, we had done this only in the connection_free() case, but
when we called connection_free_() directly from
connections_free_all(), we didn't free the connections.
Currently tor fails to build its test when enabled with bufferevents
because an #ifndef USE_BUFFEREVENTS hides bucket_millis_empty() and
friends. This is fine if we don't run tests, but if we do, we need
these functions in src/or/libtor-testing.a when linking src/test/test.
This patch moves the functions outside the #ifndef and exposes them.
See downstream bug:
https://bugs.gentoo.org/show_bug.cgi?id=510124
Conflicts:
src/or/channel.c
src/or/circuitlist.c
src/or/connection.c
Conflicts involved removal of next_circ_id and addition of
unusable-circid tracking.
The point of the "idle timeout" for connections is to kill the
connection a while after it has no more circuits. But using "last
added a non-padding cell" as a proxy for that is wrong, since if the
last circuit is closed from the other side of the connection, we
will not have sent anything on that connection since well before the
last circuit closed.
This is part of fixing 6799.
When applied to 0.2.5, it is also a fix for 12023.
Instead of killing an or_connection_t that has had no circuits for
the last 3 minutes, give every or_connection_t a randomized timeout,
so that an observer can't so easily infer from the connection close
time the time at which its last circuit closed.
Also, increase the base timeout for canonical connections from 3
minutes to 15 minutes.
Fix for ticket 6799.
The code was not disambiguating ClientTransportPlugin configured and
not used, and ClientTransportPlugin configured, but in a failed state.
The right thing to do is to undo moving the get_transport_by_addrport()
call back into get_proxy_addrport(), and remove and explicit check for
using a Bridge since by the time the check is made, if a Bridge is
being used, it is PT/proxy-less.
This change allows using Socks4Proxy, Socks5Proxy and HTTPSProxy with
ClientTransportPlugins via the TOR_PT_PROXY extension to the
pluggable transport specification.
This fixes bug #8402.
When running with User set, we frequently try to look up our
information in the user database (e.g., /etc/passwd). The seccomp2
sandbox setup doesn't let us open /etc/passwd, and probably
shouldn't.
To fix this, we have a pair of wrappers for getpwnam and getpwuid.
When a real call to getpwnam or getpwuid fails, they fall back to a
cached value, if the uid/gid matches.
(Granting access to /etc/passwd isn't possible with the way we
handle opening files through the sandbox. It's not desirable either.)
When get_proxy_addrport returned PROXY_NONE, it would leave
addr/port unset. This is inconsistent, and could (if we used the
function in a stupid way) lead to undefined behavior. Bugfix on
5b050a9b0, though I don't think it affects tor-as-it-is.
Fixes a possible root cause of 11553 by only making 64 attempts at
most to pick a circuitID. Previously, we would test every possible
circuit ID until we found one or ran out.
This algorithm succeeds probabilistically. As the comment says:
This potentially causes us to give up early if our circuit ID
space is nearly full. If we have N circuit IDs in use, then we
will reject a new circuit with probability (N / max_range) ^
MAX_CIRCID_ATTEMPTS. This means that in practice, a few percent
of our circuit ID capacity will go unused.
The alternative here, though, is to do a linear search over the
whole circuit ID space every time we extend a circuit, which is
not so great either.
This makes new vs old clients distinguishable, so we should try to
batch it with other patches that do that, like 11438.
I'm doing this because:
* User doesn't mean you're running as root, and running as root
doesn't mean you've set User.
* It's possible that the user has done some other
capability-based hack to retain the necessary privileges.
Fall back to SOMAXCONN if INT_MAX doesn't work.
We'd like to do this because the actual maximum is overrideable by the
kernel, and the value in the header file might not be right at all.
All implementations I can find out about claim that this is supported.
Fix for 9716; bugfix on every Tor.
Previously we would accept relative paths, but only if they contained a
slash somewhere (not at the end).
Otherwise we would silently not work. Closes: #9258. Bugfix on
0.2.3.16-alpha.
- Rename n_read and n_written in origin_circuit_t to make it clear that
these are only used for CIRC_BW events.
- Extract new code in control_update_global_event_mask to new
clear_circ_bw_fields function.
- Avoid control_event_refill_global function with 13 arguments and
increase code reuse factor by moving more code from control.c to
connection.c.
- Avoid an unsafe uint32_t -> int cast.
- Add TestingEnableTbEmptyEvent option.
- Prepare functions for testing.
- Rename a few functions and improve documentation.
If we get a write error on a SOCKS connection, we can't send a
SOCKS reply, now can we?
This bug has been here since 36baf7219, where we added the "hey, I'm
closing an AP connection but I haven't finished the socks
handshake!" message. It's bug 8427.
- Document the key=value format.
- Constify equal_sign_pos.
- Pass some strings that are about to be logged to escape().
- Update documentation and fix some bugs in tor_escape_str_for_socks_arg().
- Use string_is_key_value() in parse_bridge_line().
- Parenthesize a forgotten #define
- Add some more comments.
- Add some more unit test cases.
When we first implemented TLS, we assumed in conneciton_handle_write
that a TOR_TLS_WANT_WRITE from flush_buf_tls meant that nothing had
been written. But when we moved our buffers to a ring buffer
implementation back in 0.1.0.5-rc (!), we broke that invariant: it's
possible that some bytes have been written but nothing.
That's bad. It means that if we do a sequence of TLS writes that ends
with a WANTWRITE, we don't notice that we flushed any bytes, and we
don't (I think) decrement buckets.
Fixes bug 7708; bugfix on 0.1.0.5-rc
This is meant to avoid conflict with the built-in log() function in
math.h. It resolves ticket 7599. First reported by dhill.
This was generated with the following perl script:
#!/usr/bin/perl -w -i -p
s/\blog\(LOG_(ERR|WARN|NOTICE|INFO|DEBUG)\s*,\s*/log_\L$1\(/g;
s/\blog\(/tor_log\(/g;
(This is part 1 of making DNS cache use enabled/disabled on a
per-client port basis. These options are shuffled around correctly,
but don't do anything yet.)
This one is necessary for sending BEGIN cells with sane flags when
self-testing a directory port. All real entry connections were
getting their ipv{4,6}_traffic_ok flags set from their listeners, and
for begindir entry connections we didn't care, but for directory
self-testing, we had a problem.
Fixes at least one more case of 7493; if there are more lingering
cases of 7493, this might fix them too.
Bug not in any released version of Tor.
These options are for telling the SOCKSPort that it should allow or
not allow connections to IPv4/IPv6 addresses.
These aren't implemented yet; this is just the code to read the
options and get them into the entrey_connection_t.
Apparently some compilers like to eliminate memset() operations on
data that's about to go out-of-scope. I've gone with the safest
possible replacement, which might be a bit slow. I don't think this
is critical path in any way that will affect performance, but if it
is, we can work on that in 0.2.4.
Fixes bug 7352.
Conflicts:
src/or/circuitbuild.c
The conflict was trivial, since no line of code actually changed in
both branches: There was a fmt_addr() that turned into fmt_addrport()
in bug7011, and a "if (!n_conn)" that turned into "if (!n_chan)" in
master.
This is mostly a conversion from this pattern:
log("... %s:%d ...", fmt_and_decorate_addr(&addr), port);
to this:
log("... %s ...", fmt_addrport(&addr, port));
The output is the same in all cases.
Note: this is a squashed commit; see branch bug6465_rebased_v2 of user/andrea/tor.git for full history of the following 10 commits:
Convert relay.c/relay.h to channel_t
Updating the timestamp if n_flushed > 0 at the end of channel_flush_from_first_active_circuit() was redundant since channel_write_cell() et al. do it themselves.
Get rid of now-unnecessary time parameter in channel_flush_from_first_active_circuit()
Get rid of now-unnecessary time parameter in channel_flush_from_first_active_circuit() in connection_or.c
Add non-inlined external call for channeltls.c to free a packed_cell_t
Appease make check-spaces in relay.c
Replace channel_get_write_queue_len() with sufficient and easier to implement channel_has_queued_writes() in relay.c
Rename channel_touched_by_client() and client_used field for consistency with other timestamps in relay.c
Don't double-free packed cells in relay.c (channel_t Tor now bootstraps and works as a client)
Rearrange channel_t struct to use a union distinguishing listener from cell-bearing channels in relay.c
Long ago, before we had cell queues, it was necessary to maybe call
connection_handle_write() from connectino_write_to_buf_impl() on OR
connections, so that we wouldn't get into a loop of reading infinite
amounts of data and queueing it all on an outbuf before bothering to
write any data.
If that doesn't sounds like what our code does now, you're right:
right now, we won't stick more than OR_CONN_HIGHWATER bytes of cells
on an outbuf, and we won't suck more than CELL_QUEUE_HIGHWATER_SIZE
cells off any edge connection. So, there's no more call for that
code.
Removing this code will simplify our data flow, and that should be
something we can all get behind.
The SMARTLIST_FOREACH macro is more convenient than BEGIN/END when
you have a nice short loop body, but using it for long bodies makes
your preprocessor tell the compiler that all the code is on the same
line. That causes grief, since compiler warnings and debugger lines
will all refer to that one line.
So, here's a new style rule: SMARTLIST_FOREACH blocks need to be
short.
- Add a changes/ file.
- Make it compile under --enable-gcc-warnings.
- Update the file-level documentation of src/or/transports.c.
- Only update descriptor if at least a managed proxy was configured.
- Add our external IP address to the extra-info descriptor instead of 0.0.0.0.
Also, try to resolve some doxygen issues. First, define a magic
"This is doxygen!" macro so that we take the correct branch in
various #if/#else/#endifs in order to get the right documentation.
Second, add in a few grouping @{ and @} entries in order to get some
variables and fields to get grouped together.
On Windows, getsockname() on a nonblocking apparently won't work
until the connection is done connecting. On XP, it seems to fail by
reporting success and declaring that your address is INADDR_ANY. On the
Win8 preview, though, it fails more loudly and says WSAEINVAL.
Fix for bug 5374; bugfix on 0.1.1.14-alpha.
In the distant past, connection_handle_read() could be called when there
are pending bytes in the TLS object during the main loop. The design
since then has been to always read all pending bytes immediately, so
read events only trigger when the socket actually has bytes to read.
Resolves bug 5324.
If we don't do this, [::] can be interpreted to mean all v4 and all
v6 addresses. Found by dcf. Fixes bug 4760. See RFC 3493 section
5.3 for more info.
This commit is completely mechanical; I used this perl script to make it:
#!/usr/bin/perl -w -i.bak -p
if (/^\s*\#/) {
s/MS_WINDOWS/_WIN32/g;
s/\bWIN32\b/_WIN32/g;
}
Back in #1240, r1eo linked to information about how this could happen
with older Linux kernels in response to nmap. Bugs #4545 and #4547
are about how our approach to trying to deal with this condition was
broken and stupid. Thanks to wanoskarnet for reminding us about #1240.
This is a fix for the abovementioned bugs, and is a bugfix on
0.1.0.3-rc.
This code handles the new ORPort options, and incidentally makes all
remaining port types use the new port configuration systems.
There are some rough edges! It doesn't do well in the case where your
Address says one thing but you say to Advertise another ORPort. It
doesn't handle AllAddrs. It doesn't actually advertise anything besides
the first listed advertised IPv4 ORPort and DirPort. It doesn't do
port forwarding to them either.
It's not tested either, it needs more documentation, and it probably
forgets to put the milk back in the refrigerator.
Some controllers want this so they can mess with Tor's configuration
for a while via the control port before actually letting Tor out of
the house.
We do this with a new DisableNetwork option, that prevents Tor from
making any outbound connections or binding any non-control
listeners. Additionally, it shuts down the same functionality as
shuts down when we are hibernating, plus the code that launches
directory downloads.
To make sure I didn't miss anything, I added a clause straight to
connection_connect, so that we won't even try to open an outbound
socket when the network is disabled. In my testing, I made this an
assert, but since I probably missed something, I've turned it into a
BUG warning for testing.
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Also, define all commands > 128 as variable-length when using
v3 or later link protocol. Running into a var cell with an
unrecognized type is no longer a bug.
We were doing "divide bandwidth by 1000, then multiply by msec", but
that would lose accuracy: instead of getting your full bandwidth,
you'd lose up to 999 bytes per sec. (Not a big deal, but every byte
helps.)
Instead, do the multiply first, then the division. This can easily
overflow a 32-bit value, so make sure to do it as a 64-bit operation.
