The rend_cache/entry_free was missing the rend cache allocation increment
before freeing the object.
Without it, it had an underflow bug:
Sep 17 08:40:13.845 [warn] rend_cache_decrement_allocation(): Bug: Underflow
in rend_cache_decrement_allocation (on Tor 0.4.5.0-alpha-dev
7eef9ced61)
Fixes#40125
Signed-off-by: David Goulet <dgoulet@torproject.org>
Our code was using [01] as for the key type of signed->link certs,
which was incorrect. The value should be [03], to indicate that the
value as the SHA256 of an x.509 cert.
Fortunately, nothing cares about this value, so there shouldn't be
compatibility issues.
Fixes bug 40124; bugfix on 0.2.7.2-alpha.
tl;dr We were not counting cells flying from the client to the service, but we
were counting cells flying from the service to the client.
When a rendezvous cell arrives from the client to the RP, the RP forwards it to
the service.
For this to happen, the cell first passes through command_process_relay_cell()
which normally does the statistics counting. However because the `rend_circ`
circuit was not flagged with `circuit_carries_hs_traffic_stats` in
rend_mid_rendezvous(), the cell is not counted there.
Then the cell goes to circuit_receive_relay_cell() which has a special code
block based on `rend_splice` specifically for rendezvous cells, and the cell
gets directly passed to `rend_circ` via a direct call to
circuit_receive_relay_cell(). The cell never passes through
command_process_relay_cell() ever again and hence is never counted by our
rephist module.
The fix here is to flag the `rend_circ` circuit with
`circuit_carries_hs_traffic_stats` so that the cell is counted as soon as it
hits command_process_relay_cell().
Furthermore we avoid double-counting cells since the special code block of
circuit_receive_relay_cell() makes us count rendezvous cells only as they enter
the RP and not as they exit it.
Fixes#40117.
Opening a new listener connection can fail in many ways like a bind()
permission denied on a low port for instance.
And thus, we should expect to handle an error when creating a new one instead
of assert() on it.
To hit the removed assert:
ORPort 80
KeepBindCapabilities 0
Start tor. Then edit torrc:
ORPort <some-IP>:80
HUP tor and the assert is hit.
Fixes#40073
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previously, we would treat *any* incoming circuit on a non-local
channel as meaning that our ORPort was reachable. With this patch,
we make sure that the address that the peer _says_ we have is the
same as the one we're trying to advertise right now.
Closes 20165. Bugfix on 4f5192b280 in 0.1.0.1-rc, when
reachability self-tests were first introduced.
Turns out that the HS DoS defenses parameters were overwritten by the
consensus parameters everytime a new consensus would arrive.
This means that a service operator can still enable the defenses but as soon
as the intro point relay would get a new consensus, they would be overwritten.
And at this commit, the network is entirely disabling DoS defenses.
Fix this by introducing an "explicit" flag that indicate if the
ESTABLISH_INTRO cell DoS extension set those parameters or not. If set, avoid
using the consenus at once.
We are not bumping the protover HSIntro value for this because 0.4.2.x series
is EOL in 1 month and thus 0.4.3.x would be the only series with this bug. We
are confident that a backport and then upgrade path to the latest 0.4.4.x
stable coming up soon is enough to mitigate this problem in the coming months.
It avoids the upgrade path on the service side by keeping the requirement for
protover HSIntro=5.
Fixes#40109
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, we introduce a flag to teach src/test/test to split its work
into chunks. Then we replace our invocation of src/test/test in our
"make check" target with a set of 8 scripts that invoke the first
8th of the tests, the second 8th, and so on.
This change makes our "make -kj4 check" target in our hardened
gitlab build more than twice as fast, since src/test/test was taking
the longest to finish.
Closes 40098.
Previous message would say "N messages in the last T seconds", but
would give an inaccurate number for N.
We now give an accurate number, rounded up to the nearest 60 seconds.
Closes#19431.
This function once served to let circuits continue to be built over
version-1 link connections. But such connections are long-obsolete,
and it's time to remove this check.
Closes#40081.
We found this in #40076, after we started using buf_move_all() in
more places. Fixes bug #40076; bugfix on 0.3.3.1-alpha. As far as
I know, the crash only affects master, but I think this warrants a
backport, "just in case".
Without this fix, if an PT forgets to send a USERADDR command, that
results in a connection getting treated as local for the purposes of
rate-limiting.
If the PT _does_ use USERADDR, we still believe it.
Closes ticket 33747.
Previously we tolerated up to 1.5 connections for every relay we
were connected to, and didn't warn if we had fewer than 5
connections total.
Now we tolerate up to 1.5 connections per relay, and up to 4
connections per authority, and we don't warn at all when we have
fewer than 25 connections total.
Fixes bug 33880, which seems to have been provoked by our #17592
change in 0.3.5.
This commit makes it that if the ORPort is set with a single port, it will
bind to both global listen IPv4 and IPv6 addresses.
To pin an "ORPort <PORT>" to be IPv4 or IPv6, the IPv4Only/IPv6Only flags are
honored thus this will _only_ bind on IPv6 for that port value:
ORPort 9050 IPv6Only
Results in: [::]:9050
ORPort 9051 IPv4Only
Results in: [0.0.0.0]:9051
Attempting to configure an explicit IPv4 address with IPv6Only flag is an
error and vice versa.
Closes#33246
Signed-off-by: David Goulet <dgoulet@torproject.org>
The need for casting negative syscall arguments depends on the
glibc version. This affects the rules for the openat syscall which
uses the constant AT_FDCWD that is defined as a negative number.
This commit adds logic to only apply the cast when necessary, on
glibc versions from 2.27 onwards.
Different versions of glibc use either open or openat for the
opendir function. This commit adds logic to use the correct rule
for each glibc version, namely:
- Until 2.14 open is used
- From 2.15 to to 2.21 openat is used
- From 2.22 to 2.26 open is used
- From 2.27 onwards openat is used
The need for casting negative syscall arguments depends on the
glibc version. This affects the rules for the openat syscall which
uses the constant AT_FDCWD that is defined as a negative number.
This commit adds logic to only apply the cast when necessary, on
glibc versions from 2.27 onwards.
Instead of replacing connection_t.{addr,port} with a canonical
orport, and tracking the truth in real_addr, we now leave
connection_t.addr alone, and put the canonical address in
canonical_orport.
Closes#40042Closes#33898
(This is not fully general yet: we only pick randomly among
_supported_ addresses, and each extendinfo contains at most one IPv4
address and at most one IPv6 address, no matter what the extend cell
had.)
This change will help dual-stack relays do IPv6 reachability tests,
in theory, by having them sometimes do IPv4 connections and
sometimes do ipv6 connections.
Closes ticket 33220.
Create a doc/tracing/ directory to contain a top level README.md which is the
previously named Tracing.md and add the EventsCircuit.md which describes the
circuit subsystem tracing events in depth.
Closes#40036
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch ensures that we strip "\r" characters on both Windows as well
as Unix when we read text files. This should prevent the issue where
some Tor state files have been moved from a Windows machine, and thus
contains CRLF line ending, to a Unix machine where only \n is needed.
We add a test-case to ensure that we handle this properly on all our
platforms.
See: https://bugs.torproject.org/tpo/core/tor/33781
This changes a LOT of code but in the end, behavior is the same.
Unfortunately, many functions had to be changed to accomodate but in majority
of cases, to become simpler.
Functions are also removed specifically those that were there to convert an
IPv4 as a host format to a tor_addr_t. Those are not needed anymore.
The IPv4 address field has been standardized to "ipv4_addr", the ORPort to
"ipv4_orport" (currently IPv6 uses ipv6_orport) and DirPort to "ipv4_dirport".
This is related to Sponsor 55 work that adds IPv6 support for relays and this
work is needed in order to have a common interface between IPv4 and IPv6.
Closes#40043.
Signed-off-by: David Goulet <dgoulet@torproject.org>
check-cocci is still a good idea -- perhaps as a cron job? But
doing it as part of our regular tests has just been confusing,
especially to volunteers who shouldn't have to become coccinelle
experts in order to get their patches through our CI.
Closes#40030.
