We previously used FILENAME_PRIVATE identifiers mostly for
identifiers exposed only to the unit tests... but also for
identifiers exposed to the benchmarker, and sometimes for
identifiers exposed to a similar module, and occasionally for no
really good reason at all.
Now, we use FILENAME_PRIVATE identifiers for identifiers shared by
Tor and the unit tests. They should be defined static when we
aren't building the unit test, and globally visible otherwise. (The
STATIC macro will keep us honest here.)
For identifiers used only by the unit tests and never by Tor at all,
on the other hand, we wrap them in #ifdef TOR_UNIT_TESTS.
This is not the motivating use case for the split test/non-test
build system; it's just a test example to see how it works, and to
take a chance to clean up the code a little.
This implements "algorithm 1" from my discussion of bug #9072: on OOM,
find the circuits with the longest queues, and kill them. It's also a
fix for #9063 -- without the side-effects of bug #9072.
The memory bounds aren't perfect here, and you need to be sure to
allow some slack for the rest of Tor's usage.
This isn't a perfect fix; the rest of the solutions I describe on
codeable.
I added the code to pass a destroy cell to a queueing function rather
than writing it immediately, and the code to remember that we
shouldn't reuse the circuit id until the destroy is actually sent, and
the code to release the circuit id once the destroy has been sent...
and then I finished by hooking destroy_cell_queue into the rest of
Tor.
- Move cell_command_to_string from control.c to command.c.
- Use accessor for global_circuitlist instead of extern.
- Add a struct for cell statistics by command instead of six arrays.
- Split up control_event_circuit_cell_stats by using two helper functions.
- Add TestingEnableCellStatsEvent option.
- Prepare functions for testing.
- Rename a few variables and document a few things better.
Found while investigating 8093, but probably not the cause of it,
since this bug would result in us sending too few SENDMEs, not in us
receiving SENDMEs unexpectedly.
Bugfix on the fix for 7889, which has appeared in 0.2.4.10-alpha, but
not yet in any released 0.2.3.x version.
Also, don't call the exit node 'reject *' unless our decision to pick
that node was based on a non-summarized version of that node's exit
policy.
rransom and arma came up with the ideas for this fix.
Fix for 7582; the summary-related part is a bugfix on 0.2.3.2-alpha.
In a number of places, we decrement timestamp_dirty by
MaxCircuitDirtiness in order to mark a stream as "unusable for any
new connections.
This pattern sucks for a few reasons:
* It is nonobvious.
* It is error-prone: decrementing 0 can be a bad choice indeed.
* It really wants to have a function.
It can also introduce bugs if the system time jumps backwards, or if
MaxCircuitDirtiness is increased.
So in this patch, I add an unusable_for_new_conns flag to
origin_circuit_t, make it get checked everywhere it should (I looked
for things that tested timestamp_dirty), and add a new function to
frob it.
For now, the new function does still frob timestamp_dirty (after
checking for underflow and whatnot), in case I missed any cases that
should be checking unusable_for_new_conns.
Fixes bug 6174. We first used this pattern in 516ef41ac1,
which I think was in 0.0.2pre26 (but it could have been 0.0.2pre27).
Coverity is worried that we're checking entry_conn in some cases,
but not in the case where we set entry_conn->pending_optimistic_data.
This commit should calm it down (CID 718623).
This check isn't necessary (see comment on #7801), but it took at
least two smart people a little while to see why it wasn't necessary,
so let's have it in to make the code more readable.
We need a weak RNG in a couple of places where the strong RNG is
both needless and too slow. We had been using the weak RNG from our
platform's libc implementation, but that was problematic (because
many platforms have exceptionally horrible weak RNGs -- like, ones
that only return values between 0 and SHORT_MAX) and because we were
using it in a way that was wrong for LCG-based weak RNGs. (We were
counting on the low bits of the LCG output to be as random as the
high ones, which isn't true.)
This patch adds a separate type for a weak RNG, adds an LCG
implementation for it, and uses that exclusively where we had been
using the platform weak RNG.
This is meant to avoid conflict with the built-in log() function in
math.h. It resolves ticket 7599. First reported by dhill.
This was generated with the following perl script:
#!/usr/bin/perl -w -i -p
s/\blog\(LOG_(ERR|WARN|NOTICE|INFO|DEBUG)\s*,\s*/log_\L$1\(/g;
s/\blog\(/tor_log\(/g;
Path use bias measures how often we can actually succeed using the circuits we
actually try to use. It is a subset of path bias accounting, but it is
computed as a separate statistic because the rate of client circuit use may
vary depending on use case.
Otherwise, it's possible to create streams or circuits with these
bogus IDs, leading to orphaned circuits or streams, or to ones that
can cause bandwidth DOS problems.
Fixes bug 7889; bugfix on all released Tors.
In general, if we tried to use a circ for a stream, but then decided to place
that stream on a different circuit, we need to probe the original circuit
before deciding it was a "success".
We also need to do the same for cannibalized circuits that go unused.
The unit of work sent to a cpuworker is now a create_cell_t; its
response is now a created_cell_t. Several of the things that call or
get called by this chain of logic now take create_cell_t or
created_cell_t too.
Since all cpuworkers are forked or spawned by Tor, they don't need a
stable wire protocol, so we can just send structs. This saves us some
insanity, and helps p
(This is part 2 of making DNS cache use enabled/disabled on a
per-client port basis. This implements the CacheIPv[46]DNS options,
but not the UseCachedIPv[46] ones.)
This makes it so we can handle getting an IPv6 in the 3 different
formats we specified it for in RESOLVED cells,
END_STREAM_REASON_EXITPOLICY cells, and CONNECTED cells.
We don't cache IPv6 addresses yet, since proposal 205 isn't
implemented.
There's a refactored function for parsing connected cells; it has unit
tests.
We'd like these functions to be circuit-relative so that we can
implement a per-circuit DNS cache and per-circuit DNS cache rules for
proposal 205 or its successors. I'm doing this now, as a part of the
IPv6 exits code, since there are about to be a few more instances
of code using this.
This is the simplest possible workaround: make it safe to call
circuit_cell_queue_clear() on a non-attached circuit, and make it
safe-but-a-LD_BUG-warning to call update_circuit_on_cmux() on a
non-attached circuit.
LocalWords: unstage src Untracked
Note: this is a squashed commit; see branch bug6465_rebased_v2 of user/andrea/tor.git for full history of the following 10 commits:
Convert relay.c/relay.h to channel_t
Updating the timestamp if n_flushed > 0 at the end of channel_flush_from_first_active_circuit() was redundant since channel_write_cell() et al. do it themselves.
Get rid of now-unnecessary time parameter in channel_flush_from_first_active_circuit()
Get rid of now-unnecessary time parameter in channel_flush_from_first_active_circuit() in connection_or.c
Add non-inlined external call for channeltls.c to free a packed_cell_t
Appease make check-spaces in relay.c
Replace channel_get_write_queue_len() with sufficient and easier to implement channel_has_queued_writes() in relay.c
Rename channel_touched_by_client() and client_used field for consistency with other timestamps in relay.c
Don't double-free packed cells in relay.c (channel_t Tor now bootstraps and works as a client)
Rearrange channel_t struct to use a union distinguishing listener from cell-bearing channels in relay.c
Extend cells aren't allowed to have a stream_id, but we were only
blocking them when they had a stream_id that corresponded to a
connection. As far as I can tell, this change is harmless: it will
make some kinds of broken clients not work any more, but afaik nobody
actually make a client that was broken in that way.
Found while hunting for other places where we made the same mistake
as in 6271.
Bugfix on d7f50337c1 back from May 2003, which introduced
telescoping circuit construction into 0.0.2pre8.
This avoids a possible crash bug in flush_from_first_active_circuit.
Fixes bug 6341; bugfix on 0.2.2.7-alpha.
Bug reported and fixed by a pseudonymous user on IRC.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
