Cases that now send errors:
* Malformed IP address (SOCKS5_GENERAL_ERROR)
* CONNECT/RESOLVE request with IP, when SafeSocks is set
(SOCKS5_NOT_ALLOWED)
* RESOLVE_PTR request with FQDN (SOCKS5_ADDRESS_TYPE_NOT_SUPPORTED)
* Malformed FQDN (SOCKS5_GENERAL_ERROR)
* Unknown address type (SOCKS5_ADDRESS_TYPE_NOT_SUPPORTED)
Fixes bug 13314.
Add a --delay option to test-network.sh, which configures the delay before
the chutney network tests for data transmission. The default remains at
18 seconds if the argument isn't specified.
Apparently we should be using bootstrap status for this (eventually).
Partially implements ticket 13161.
The default shell on OS X is bash, which has a builtin echo. When called
in "sh" mode, this echo does not accept "-n". This patch uses "/bin/echo -n"
instead.
Partially fixes issue 13161.
Add the TestingDirAuthVoteExit option, a list of nodes to vote Exit for,
regardless of their uptime, bandwidth, or exit policy.
TestingTorNetwork must be set for this option to have any effect.
Works around an issue where authorities would take up to 35 minutes to
give nodes the Exit flag in a test network, despite short consensus
intervals. Partially implements ticket 13161.
Fixes bug 13295; bugfix on 0.2.5.3-alpha.
The alternative here is to call crypto_global_init() from tor-resolve,
but let's avoid linking openssl into tor-resolve for as long as we
can.
When a spawned process forks, fails, then exits very quickly, (this
typically occurs when exec fails), there is a race condition between the
SIGCHLD handler updating the process_handle's fields, and checking the
process status in those fields. The update can occur before or after the
spawn tests check the process status.
We check whether the process is running or not running (rather than just
checking if it is running) to avoid this issue.
In circuit_build_times_calculate_timeout() in circuitstats.c, avoid dividing
by zero in the pareto calculations.
If either the alpha or p parameters are 0, we would divide by zero, yielding
an infinite result; which would be clamped to INT32_MAX anyway. So rather
than dividing by zero, we just skip the offending calculation(s), and
use INT32_MAX for the result.
Division by zero traps under clang -fsanitize=undefined-trap -fsanitize-undefined-trap-on-error.
Avoid 4 null pointer errors under clang shallow analysis (the default when
building under Xcode) by using tor_assert() to prove that the pointers
aren't null. Resolves issue 13284 via minor code refactoring.
c99 lets us do neat stuff like:
{
int j, k;
foo(&j, &k);
int z = j + k;
}
and also
struct point { int x; int y; };
struct point pt = { .x=5, .y=5 };
This commit makes the configure scripts check to make sure your
compiler implements them. It also disables our longstanding warning
about midblock declarations.
Closes ticket 13233.
When DisableNetwork is set, do not launch pluggable transport plugins,
and if any are running already, terminate the existing instances.
Resolves ticket 13213.
Allow clients to use optimistic data when connecting to a hidden service,
which should cut out the initial round-trip for client-side programs
including Tor Browser.
(Now that Tor 0.2.2.x is obsolete, all hidden services should support
server-side optimistic data.)
See proposal 181 for details. Implements ticket 13211.
Clients are now willing to send optimistic circuit data (before they
receive a 'connected' cell) to relays of any version. We used to
only do it for relays running 0.2.3.1-alpha or later, but now all
relays are new enough.
Resolves ticket 13153.
Return an error when the second or later arguments of the
"setevents" controller command are invalid events. Previously we
would return success while silently skipping invalid events.
Fixes bug 13205; bugfix on 0.2.3.2-alpha. Reported by "fpxnns".
Note that this will likely need to be folded with the changes file for #12751,
as this change is a mere fixup on top of the changes introduced for #12751.
Stop modifying the value of our DirReqStatistics torrc option just
because we're not a bridge or relay. This bug was causing Tor
Browser users to write "DirReqStatistics 0" in their torrc files
as if they had chosen to change the config.
Fixes bug 4244; bugfix on 0.2.3.1-alpha.
Clients now send the correct address for their chosen rendezvous point
when trying to access a hidden service. They used to send the wrong
address, which would still work some of the time because they also
sent the identity digest of the rendezvous point, and if the hidden
service happened to try connecting to the rendezvous point from a relay
that already had a connection open to it, the relay would reuse that
connection. Now connections to hidden services should be more robust
and faster. Also, this bug meant that clients were leaking to the hidden
service whether they were on a little-endian (common) or big-endian (rare)
system, which for some users might have reduced their anonymity.
Fixes bug 13151; bugfix on 0.2.1.5-alpha.
Tor Browser includes several ClientTransportPlugin lines in its
torrc-defaults file, leading every Tor Browser user who looks at her
logs to see these notices and wonder if they're dangerous.
Resolves bug 13124; bugfix on 0.2.5.3-alpha.
Technically, we're not allowed to take the address of a member can't
exist relative to the null pointer. That makes me wonder how any sane
compliant system implements the offsetof macro, but let's let sleeping
balrogs lie.
Fixes 13096; patch on 0.1.1.9-alpha; patch from "teor", who was using
clang -fsanitize=undefined-trap -fsanitize-undefined-trap-on-error -ftrapv
(And replay them once we know our first real logs.)
This is an implementation for issue 6938. It solves the problem of
early log mesages not getting sent to log files, but not the issue of
early log messages not getting sent to controllers.
This fixes bug 13102 (not on any released Tor) where using the
standard SSIZE_MAX name broke mingw64, and we didn't realize.
I did this with
perl -i -pe 's/SIZE_T_MAX/SIZE_MAX/' src/*/*.[ch] src/*/*/*.[ch]
This implements the meat of #12899. This commit should simply remove the
parts of Tor dirauths used to check whether a relay was supposed to be
named or not, it doesn't yet convert to a new mechanism for
reject/invalid/baddir/badexiting relays.
Back in 078d6bcd, we added an event number 0x20, but we didn't make
the event_mask field big enough to compensate.
Patch by "teor". Fixes 13085; bugfix on 0.2.5.1-alpha.
This is in preparation for a big patch series removing the entire Naming
system from Tor. In its wake, the approved-routers file is being
deprecated, and a replacement option to allow only pre-approved routers
is not being implemented.
Otherwise, when we're out of input *and* finalizing, we might report
TOR_ZLIB_OK erroneously and not finalize the buffer.
(I don't believe this can happen in practice, with our code today:
write_to_buf_zlib ensures that we are never trying to write into a
completely empty buffer, and zlib says "Z_OK" if you give it even
one byte to write into.)
Fixes bug 11824; bugfix on 0.1.1.23 (06e09cdd47).
torrc.minimal is now the one that should change as infrequently as
possible. To schedule an change to go into it eventually, make your
change to torrc.minimal.in-sample.
torrc.sample is now the volatile one: we can change it to our hearts'
content.
Closes ticket #11144
This implements a feature from bug 13000. Instead of starting a bwauth
run with this wrong idea about their bw, relays should do the self-test
and then get measured.
When a tor relay starts up and has no historical information about its
bandwidth capability, it uploads a descriptor with a bw estimate of 0.
It then starts its bw selftest, but has to wait 20 minutes to upload the
next descriptor due to the MAX_BANDWIDTH_CHANGE_FREQ delay. This change
should mean that on average, relays start seeing meaningful traffic a
little quicker, since they will have a higher chance to appear in the
consensus with a nonzero bw.
Patch by Roger, changes file and comment by Sebastian.
Most of these are in somewhat non-obvious code where it is probably
a good idea to initialize variables and add extra assertions anyway.
Closes 13036. Patches from "teor".
It's now a protocol-warn, since there's nothing relay operators can
do about a client that sends them a malformed create cell.
Resolves bug 12996; bugfix on 0.0.6rc1.
Any error when acquiring the CryptoAPI context should get treated as
bad. Also, this one can't happen for the arguments we're giving.
Fixes bug 10816; bugfix on 0.0.2pre26.
Previously, we had done this only in the connection_free() case, but
when we called connection_free_() directly from
connections_free_all(), we didn't free the connections.
The fix for bug 4647 accidentally removed our hack from bug 586 that
rewrote HashedControlPassword to __HashedControlSessionPassword when
it appears on the commandline (which allowed the user to set her own
HashedControlPassword in the torrc file while the controller generates
a fresh session password for each run).
Fixes bug 12948; bugfix on 0.2.5.1-alpha.
This way, we don't get locking failures when we hit an assertion in
the unit tests. Also, we might find out about unit test bugs from
folks who can't do gdb.
Two bugs here:
1) We didn't add EXTEND2/EXTENDED2 to relay_command_to_string().
2) relay_command_to_string() didn't log the value of unrecognized
commands.
Both fixed here.
When we merged the cookieauthfile creation logic in 33c3e60a37, we
accidentally took out this feature. Fixes bug 12864, bugfix on
0.2.5.1-alpha.
Also adds an ExtORPortCookieAuthFileGroupReadable, since there's no
reason not to.
We added some AS_VAR_IF-based checks to detect whether we have
managed to compile (but not link) with stack-protector. On autoconf
before 2.63, we don't have AS_VAR_IF, so we just have to let the
user get a compile error rather than a helpful "find libssp" error.
Fixes bug 12693; bugfix on 0.2.5.2-alpha (commit 21ac292820)
When Tor starts with DisabledNetwork set, it would correctly
conclude that it shouldn't try making circuits, but it would
mistakenly cache this conclusion and continue believing it even
when DisableNetwork is set to 0. Fixes the bug introduced by the
fix for bug 11200; bugfix on 0.2.5.4-alpha.
Our current systemd unit uses "Type = simple", so systemd does not expect tor to
fork. If the user has "RunAsDaemon 1" in their torrc, then things won't work as
expected. This is e.g. the case on Debian (and derivatives), since there we pass
"--defaults-torrc /usr/share/tor/tor-service-defaults-torrc" (that contains
"RunAsDaemon 1") by default.
The only solution I could find is to explicitly pass "--RunAsDaemon 0" when
starting tor from the systemd unit file, which this commit does.
Those used to be normal to receive on hidden service circuits due to bug
1038, but the buggy Tor versions are long gone from the network so we
can afford to resume watching for them. Resolves the rest of bug 1038;
bugfix on 0.2.1.19.
This function is supposed to construct a list of all the ciphers in
the "v2 link protocol cipher list" that are supported by Tor's
openssl. It does this by invoking ssl23_get_cipher_by_char on each
two-byte ciphersuite ID to see which ones give a match. But when
ssl23_get_cipher_by_char cannot find a match for a two-byte SSL3/TLS
ciphersuite ID, it checks to see whether it has a match for a
three-byte SSL2 ciphersuite ID. This was causing a read off the end
of the 'cipherid' array.
This was probably harmless in practice, but we shouldn't be having
any uninitialized reads.
(Using ssl23_get_cipher_by_char in this way is a kludge, but then
again the entire existence of the v2 link protocol is kind of a
kludge. Once Tor 0.2.2 clients are all gone, we can drop this code
entirely.)
Found by starlight. Fix on 0.2.4.8-alpha. Fixes bug 12227.
Authorities now assign the Guard flag to the fastest 25% of the
network (it used to be the fastest 50%). Also raise the consensus
weight that guarantees the Guard flag from 250 to 2000. For the
current network, this results in about 1100 guards, down from 2500.
This step paves the way for moving the number of entry guards
down to 1 (proposal 236) while still providing reasonable expected
performance for most users.
Implements ticket 12690.
Found because LibreSSL has OPENSSL_NO_COMP always-on, but this
conflicts with the way that _we_ turn off compression. Patch from
dhill, who attributes it to "OpenBSD". Fixes bug 12602; bugfix on
0.2.1.1-alpha, which introduced this turn-compression-off code.
- Don't try to rm -rf the directory before we start: somebody might
have set it to ~, which would be quite sad.
- Always quote the directory name
- Use 'make reset-gcov' before running tests.
- Use 'make check', not ./src/test/test
Otherwise, it always seems as though our Exclude* options have
changed, since we're comparing modified to unmodified values.
Patch from qwerty1. Fixes bug 9801. Bugfix on 0.2.4.10-alpha, where
GeoIPExcludeUnknown was introduced.
We should only assign a relay the HSDir flag if it is currently
considered valid. We can accomplish this by only considering active
relays, and as a consequence of this we also exclude relays that are
currently hibernating. Fixes#12573
Long ago we supported systems where there was no support for
threads, or where the threading library was broken. We shouldn't
have do that any more: on every OS that matters, threads exist, and
the OS supports running threads across multiple CPUs.
This resolves tickets 9495 and 12439. It's a prerequisite to making
our workqueue code work better, since sensible workqueue
implementations don't split across multiple processes.
I don't know whether we missed these or misclassified them when we
first made the "DIRECTORY AUTHORITY SERVER OPTIONS" section, but they
really belong there.
Check for consistency between the queued destroy cells and the marked
circuit IDs. Check for consistency in the count of queued destroy
cells in several ways. Check to see whether any of the marked circuit
IDs have somehow been marked longer than the channel has existed.
And add a comment about why conditions that would cause us to drop a
cell should get checked before actions that would cause us to send a
destroy cell.
Spotted by 'cypherpunks'.
And note that these issues have been present since 0.0.8pre1 (commit
0da256ef), where we added a "shutting down" state, and started
responding to all create cells with DESTROY when shutting down.
Conflicts:
src/or/channel.c
src/or/circuitlist.c
src/or/connection.c
Conflicts involved removal of next_circ_id and addition of
unusable-circid tracking.
The point of the "idle timeout" for connections is to kill the
connection a while after it has no more circuits. But using "last
added a non-padding cell" as a proxy for that is wrong, since if the
last circuit is closed from the other side of the connection, we
will not have sent anything on that connection since well before the
last circuit closed.
This is part of fixing 6799.
When applied to 0.2.5, it is also a fix for 12023.
Instead of killing an or_connection_t that has had no circuits for
the last 3 minutes, give every or_connection_t a randomized timeout,
so that an observer can't so easily infer from the connection close
time the time at which its last circuit closed.
Also, increase the base timeout for canonical connections from 3
minutes to 15 minutes.
Fix for ticket 6799.
When we find a stranded one-hop circuit, log whether it is dirty,
log information about any streams on it, and log information about
connections they might be linked to.
This function is supposed to construct a list of all the ciphers in
the "v2 link protocol cipher list" that are supported by Tor's
openssl. It does this by invoking ssl23_get_cipher_by_char on each
two-byte ciphersuite ID to see which ones give a match. But when
ssl23_get_cipher_by_char cannot find a match for a two-byte SSL3/TLS
ciphersuite ID, it checks to see whether it has a match for a
three-byte SSL2 ciphersuite ID. This was causing a read off the end
of the 'cipherid' array.
This was probably harmless in practice, but we shouldn't be having
any uninitialized reads.
(Using ssl23_get_cipher_by_char in this way is a kludge, but then
again the entire existence of the v2 link protocol is kind of a
kludge. Once Tor 0.2.2 clients are all gone, we can drop this code
entirely.)
Found by starlight. Fix on 0.2.4.8-alpha. Fixes bug 12227.
This code mis-handled the case where a circuit got the same circuit
ID in both directions. I found three instances of it in the
codebase, by grepping for [pn]_circ_id.
Because of the issue in command_process_relay_cell(), this would
have made roughly one circuit in a million completely nonfunctional.
Fixes bug 12195.
On some profiles of Andrea's from #11332, I found that a great deal
of time can still be attributed to functions called from
update_router_have_minimum_dir_info(). This is making our
digestmap, tor_memeq, and siphash functions take a much bigger
portion of runtime than they really should.
If we're calling update_router_have_minimum_dir_info() too often,
that's because we're calling router_dir_info_changed() too often.
And it looks like most of the callers of router_dir_info_changed()
are coming as tail-calls from router_set_status() as invoked by
channel_do_open_actions().
But we don't need to call router_dir_info_changed() so much! (I'm
not quite sure we need to call it from here at all, but...) Surely
we don't need to call it from router_set_status when the router's
status has not actually changed.
This patch makes us call router_dir_info_changed() from
router_set_status only when we are changing the router's status.
Fix for bug 12170. This is leftover from our fix back in 273ee3e81
in 0.1.2.1-alpha, where we started caching the value of
update_router_have_minimum_dir_info().
tor_memeq has started to show up on profiles, and this is one of the
most frequent callers of that function, appearing as it does on every
cell handled for entry or exit.
59f9097d5c introduced tor_memneq here;
it went into Tor 0.2.1.31. Fixes part of 12169.
I've copied the entries from changes/, labeled the ones that also
appeared in 0.2.4.22, sorted them lightly with a python script
(added to maint), and combined sections with the same name.
I didn't combine sections without a description (e.g. "Minor
bugfixes:"), since we'll probably add a description to those.
Without this fix, when running with bridges, we would try fetching
directory info far too early, and have up to a 60 second delay if we
started with bridge descriptors available.
Fixes bug 11965. Fix on 0.2.3.6-alpha, arma thinks.
The old cache had problems:
* It needed to be manually preloaded. (It didn't remember any
address you didn't tell it to remember)
* It was AF_INET only.
* It looked at its cache even if the sandbox wasn't turned on.
* It couldn't remember errors.
* It had some memory management problems. (You can't use memcpy
to copy an addrinfo safely; it has pointers in.)
This patch fixes those issues, and moves to a hash table.
Fixes bug 11970; bugfix on 0.2.5.1-alpha.
These are needed under some circumstances if we are running with
expensive-hardening and sandbox at the same time.
fixes 11477, bugfix on 0.2.5.4-alpha (where we introduced
expensive-hardening)
None of the things we might exec() can possibly run under the
sanbox, so rather than crash later, we have to refuse to accept the
configuration nice and early.
The longer-term solution is to have an exec() helper, but wow is
that risky.
fixes 12043; bugfix on 0.2.5.1-alpha
When we converted the horrible set of options that previously
controlled "use ORPort or DirPort? Anonymously or Non-anonymouly?" to
a single 'indirection' argument, we missed
directory_post_to_dirservers.
The problematic code was introduced in 5cbeb6080, which went into
0.2.4.3-alpha. This is a fix for bug 11469.
When running with User set, we frequently try to look up our
information in the user database (e.g., /etc/passwd). The seccomp2
sandbox setup doesn't let us open /etc/passwd, and probably
shouldn't.
To fix this, we have a pair of wrappers for getpwnam and getpwuid.
When a real call to getpwnam or getpwuid fails, they fall back to a
cached value, if the uid/gid matches.
(Granting access to /etc/passwd isn't possible with the way we
handle opening files through the sandbox. It's not desirable either.)
On OpenBSD 5.4, time_t is a 32-bit integer. These instances contain
implicit treatment of long and time_t as comparable types, so explicitly
cast to time_t.
Apparently, there exist cross-compiling environments for arm7 where
you can compile a 64x64->128 multiply, but not link it.
Fixes bug 11729; bugfix on 0.2.4.8-alpha. Patch from 'conradev'.
Clients should always believe that v3 directory authorities serve
extra-info documents, regardless of whether their server descriptor
contains a "caches-extra-info" line or not.
Fixes part of #11683.
on #9686, gmorehose reports that the 500 MB lower limit is too high
for raspberry pi users.
This is a backport of 647248729f to 0.2.4.
Note that in 0.2.4, the option is called MaxMemInCellQueues.
When clearing a list of tokens, it's important to do token_clear()
on them first, or else any keys they contain will leak. This didn't
leak memory on any of the successful microdescriptor parsing paths,
but it does leak on some failing paths when the failure happens
during tokenization.
Fixes bug 11618; bugfix on 0.2.2.6-alpha.
The python scripts invoked by 'make check' didn't work on python3
before. That was a problem on systems where 'python' is python3.
Fixes bug 11608; bugfix on 0.2.5.2-alpha.
If we can't detect the physical memory, the new default is 8 GB on
64-bit architectures, and 1 GB on 32-bit architectures.
If we *can* detect the physical memory, the new default is
CLAMP(256 MB, phys_mem * 0.75, MAX_DFLT)
where MAX_DFLT is 8 GB on 64-bit architectures and 2 GB on 32-bit
architectures.
You can still override the default by hand. The logic here is simply
trying to choose a lower default value on systems with less than 12 GB
of physical RAM.
Previously we said "Sandbox is not implemented on this platform" on
Linux boxes without libseccomp. Now we say that you need to build
Tor built with libseccomp. Fixes bug 11543; bugfix on 0.2.5.1-alpha.
Fixes a possible root cause of 11553 by only making 64 attempts at
most to pick a circuitID. Previously, we would test every possible
circuit ID until we found one or ran out.
This algorithm succeeds probabilistically. As the comment says:
This potentially causes us to give up early if our circuit ID
space is nearly full. If we have N circuit IDs in use, then we
will reject a new circuit with probability (N / max_range) ^
MAX_CIRCID_ATTEMPTS. This means that in practice, a few percent
of our circuit ID capacity will go unused.
The alternative here, though, is to do a linear search over the
whole circuit ID space every time we extend a circuit, which is
not so great either.
This makes new vs old clients distinguishable, so we should try to
batch it with other patches that do that, like 11438.
The server cipher list is (thanks to #11513) chosen systematically to
put the best choices for Tor first. The client cipher list is chosen
to resemble a browser. So let's set SSL_OP_CIPHER_SERVER_PREFERENCE
to have the servers pick according to their own preference order.
This isn't on by default; to get it, you need to set "TransProxyType
ipfw". (The original patch had automatic detection for whether
/dev/pf is present and openable, but that seems marginally fragile.)
Back in 175b2678, we allowed servers to recognize clients who are
telling them the truth about their ciphersuites, and select the best
cipher from on that list. This implemented the server side of proposal
198.
In bugs 11492, 11498, and 11499, cypherpunks found a bunch of mistakes
and omissions and typos in the UNRESTRICTED_SERVER_CIPHER_LIST we had.
In #11513, I found a couple more.
Rather than try to hand-edit this list, I wrote a short python script
to generate our ciphersuite preferences from the openssl headers.
The new rules are:
* Require forward secrecy.
* Require RSA (since our servers only configure RSA keys)
* Require AES or 3DES. (This means, reject RC4, DES, SEED, CAMELLIA,
and NULL.)
* No export ciphersuites.
Then:
* Prefer AES to 3DES.
* If both suites have the same cipher, prefer ECDHE to DHE.
* If both suites have the same DHE group type, prefer GCM to CBC.
* If both suites have the same cipher mode, prefer SHA384 to SHA256
to SHA1.
* If both suites have the same digest, prefer AES256 to AES128.
This commit does nothing other than pull the changes/* files into
ChangeLog, sorted by declared type. I haven't comined any entries or
vetted anything yet.
When we successfully create a usable circuit after it previously
timed out for a certain amount of time, we should make sure that
our public IP address hasn't changed and update our descriptor.
The major changes are to re-order some ciphers, to drop the ECDH suites
(note: *not* ECDHE: ECDHE is still there), to kill off some made-up
stuff (like the SSL_RSA_FIPS_WITH_3DES_EDE_CBC_SHA suite), to drop
some of the DSS suites... *and* to enable the ECDHE+GCM ciphersuites.
This change is autogenerated by get_mozilla_ciphers.py from
Firefox 28 and OpenSSL 1.0.1g.
Resolves ticket 11438.
In C, it's a bad idea to do this:
char *cp = array;
char *end = array + array_len;
/* .... */
if (cp + 3 >= end) { /* out of bounds */ }
because cp+3 might be more than one off the end of the array, and
you are only allowed to construct pointers to the array elements,
and to an element one past the end. Instead you have to say
if (cp - array + 3 >= array_len) { /* ... */ }
or something like that.
This patch fixes two of these: one in process_versions_cell
introduced in 0.2.0.10-alpha, and one in process_certs_cell
introduced in 0.2.3.6-alpha. These are both tracked under bug
10363. "bobnomnom" found and reported both. See also 10313.
In our code, this is likely to be a problem as we used it only if we
get a nasty allocator that makes allocations end close to (void*)-1.
But it's best not to have to worry about such things at all, so
let's just fix all of these we can find.
According to reports, most programs degrade somewhat gracefully on
getting no answer for an MX or a CERT for www.example.com, but many
flip out completely on a NOTIMPL error.
Also, treat a QTYPE_ALL query as just asking for an A record.
The real fix here is to implement proposal 219 or something like it.
Fixes bug 10268; bugfix on 0.2.0.1-alpha.
Based on a patch from "epoch".
We are searching @CONFDIR@ before $HOME, but the documentation
implied otherwise.
I screwed this up in f5e86bcd6c, when I
first documented the $HOME/.torrc possibility.
Fix for bug 9213; bugfix on 0.2.3.18-rc.
Otherwise, it could mung the thing that came over the net on windows,
which would defeat the purpose of recording the unparseable thing.
Fixes bug 11342; bugfix on 0.2.2.1-alpha.
This is a fix for 9963. I say this is a feature, but if it's a
bugfix, it's a bugfix on 0.2.4.18-rc.
Old behavior:
Mar 27 11:02:19.000 [notice] Bootstrapped 50%: Loading relay descriptors.
Mar 27 11:02:20.000 [notice] Bootstrapped 51%: Loading relay descriptors.
Mar 27 11:02:20.000 [notice] Bootstrapped 52%: Loading relay descriptors.
... [Many lines omitted] ...
Mar 27 11:02:29.000 [notice] Bootstrapped 78%: Loading relay descriptors.
Mar 27 11:02:33.000 [notice] We now have enough directory information to build circuits.
New behavior:
Mar 27 11:16:17.000 [notice] Bootstrapped 50%: Loading relay descriptors
Mar 27 11:16:19.000 [notice] Bootstrapped 55%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 60%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 65%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 70%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 75%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] We now have enough directory information to build circuits.
The build was broken by changes in f8c45339f7, but we didn't
notice, since that commit also made torify.1 only get built when
tor-fw-helper was turned on.
Fixes bug 11321; bugfix on Tor 0.2.5.1-alpha.
Most of these are simple. The only nontrivial part is that our
pattern for using ENUM_BF was confusing doxygen by making declarations
that didn't look like declarations.
In circuitlist_free_all, we free all the circuits, removing them from
the map as we go, but we weren't actually freeing the placeholder
entries that we use to indicate pending DESTROY cells.
Fix for bug 11278; bugfix on the 7912 code that was merged in
0.2.5.1-alpha
In the end this required a slightly nasty hack using a dummy anchor as
an option heading in order to make the "Other recognized __flags__"
line indent properly.
Fixes bug 11061; Bugfix on 61d740ed.
The crypto_early_init() function could only be called at most twice,
and both of those were during startup. AFAICT leaking the first set
of locks was the only non-idempotent thing.
There are still quite a few 0.2.3.2x relays running for x<5, and while I
agree they should upgrade, I don't think cutting them out of the network
is a net win on either side.
This change prevents LD_BUG warnings and bootstrap failure messages
when we try to do directory fetches when starting with
DisableNetwork == 1, a consensus present, but no descriptors (or
insufficient descriptors) yet.
Fixes bug 11200 and bug 10405. It's a bugfix on 0.2.3.9-alpha.
Thanks to mcs for walking me through the repro instructions!
This is meant to be a better bug 9229 fix -- or at least, one more
in tune with the intent of the original code, which calls
router_retry_directory_downloads() only on the first bridge descriptor.
This prevents long stalls when we're starting with a state file but
with no bridge descriptors. Fixes bug 9229. I believe this bug has
been present since 0.2.0.3-alpha.
By default, after you've made a connection to port XYZ, we assume
you might still want to have an exit ready to connect to XYZ for one
hour. This patch lets you lower that interval.
Implements ticket 91
We have ignored any ports listed here since 80365b989 (0.0.7rc1),
but we didn't warn the user that we were ignoring them. This patch
adds a warning if you put explicit ports in any of the options
{Socks,Dir}Policy or AuthDir{Reject,Invalid,BadDir,BadExit}. It
also adjusts the manpage to say that ports are ignored.
Fixes ticket 11108.
See 1d2179bc90 in master for details.
"""
Fall back to registered country if necessary.
When extracting geoip and geoip6 files from MaxMind's GeoLite2 Country
database, we only look at country->iso_code which is the two-character ISO
3166-1 country code of the country where MaxMind believes the end user is
located.
But if MaxMind thinks a range belongs to anonymous proxies, they don't put
anything there. Hence, we omit those ranges and resolve them all to '??'.
That's not what we want.
What we should do is first try country->iso_code, and if there's no such
key, try registered_country->iso_code which is the country in which the
ISP has registered the IP address.
In short: let's fill all A1 entries with what ARIN et. al think.
"""
It's possible for two threads to hit assertion failures at the same
time. If that happens, let's keep them from stomping on the same
cb_buf field.
Fixes bug 11048; bugfix on 0.2.5.2-alpha. Reported by "cypherpunks".
This should make more platforms (in particular, ones with compilers
where -fomit-frame-pointer is on by default but table generation
isn't) support backtrace generation. Thanks to cypherpunks for this
one.
Fixes bug 11047; bugfix on 0.2.5.2-alpha.
Back in 5e762e6a5c, non-exit servers
stopped launching DNS requests for users. So there's no need for them
to see if their DNS answers are hijacked.
Patch from Matt Pagan. I think this is a 965 fix.
For a client using a SocksPort connection and IPv6, the connect reply
from tor daemon did not handle AF_INET6 thus sending back the wrong
payload to the client.
A changes file is provided and this fixes#10987
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
On busy servers, this function takes up something like 3-7% in
different profiles, and gets invoked every time we need to participate
as the midpoint in a hidden service.
So maybe walking through a linked list of all the circuits here wasn't
a good idea.
We log only one message, containing a complete list of what's
wrong. We log the complete list whenever any of the possible things
that could have gotten wrong gets worse.
Fix for #9870. Bugfix on 10480dff01, which we merged in
0.2.5.1-alpha.
If you had a resolv.conf file with a nameserver line containing no
nameserver IP, we would crash. That's not terrible, but it's not
desirable.
Fixes bug 8788; bugfix on 0.1.1.23. Libevent already has this fix.
These options were added back in 0.1.2.5-alpha, but no longer make any
sense now that all directories support tunneled connections and
BEGIN_DIR cells. These options were on by default; now they are
always-on.
This is a fix for 10849, where TunnelDirConns 0 would break hidden
services -- and that bug arrived, I think, in 0.2.0.10-alpha.
This is a bugfix on 0.2.2.26-beta, because 6b83b3b made directory
authorities remove themselves from the list of directory authorities to
upload to, but didn't suppress the warning in case they're the only
directory authority in the network.
(There is no longer meaningfully any such thing as a HS authority,
since we stopped uploading or downloading v0 hs descriptors in
0.2.2.1-alpha.)
Implements #10881, and part of #10841.
Apparently fedora currently has ECDH but not P224. This isn't a huge
deal, since we no longer use OpenSSL's P224 ever (see #9780 and
72c1e5acfe). But we shouldn't have segfaulting benchmarks really.
Fixes bug 10835; bugfix on 0.2.4.8-alpha.
This time, we use a pthread_attr to make sure that if pthread_create
succeeds, the thread is successfully detached.
This probably isn't the big thing going on with 4345, since it'd be
a bit weird for pthread_detach to be failing. But it's worth
getting it right.
Right now this accounts for about 1% of circuits over all, but if you
pick a guard that's running 0.2.3, it will be about 6% of the circuits
running through that guard.
Making sure that every circuit has at least one ntor link means that
we're getting plausibly good forward secrecy on every circuit.
This implements ticket 9777,
It's possible to set your ExitNodes to contains only exits that don't
have the Exit flag. If you do that, we'll decide that 0 of your exits
are working. Instead, in that case we should look at nodes which have
(or which might have) exit policies that don't reject everything.
Fix for bug 10543; bugfix on 0.2.4.10-alpha.
If you want a slow shutdown, send SIGNAL SHUTDOWN.
(Why not just have the default be SIGNAL QUIT? Because this case
should only happen when an owning controller has crashed, and a
crashed controller won't be able to give the user any "tor is
shutting down" feedback, and so the user gets confused for a while.
See bug 10449 for more info)
The remaining vestige is that we continue to publish the V2dir flag,
and that, for the controller, we continue to emit v2 directory
formats when requested.
Previously, we would sometimes decide in directory_get_from_hs_dir()
to connect to an excluded node, and then later in
directory_initiate_command_routerstatus_rend() notice that it was
excluded and strictnodes was set, and catch it as a stopgap.
Additionally, this patch preferentially tries to fetch from
non-excluded nodes even when StrictNodes is off.
Fix for bug #10722. Bugfix on 0.2.0.10-alpha (the v2 hidserv directory
system was introduced in e136f00ca). Reported by "mr-4".
If we don't, we can wind up with a wedged cpuworker, and write to it
for ages and ages.
Found by skruffy. This was a bug in 2dda97e8fd, a.k.a. svn
revision 402. It's been there since we have been using cpuworkers.
