This patch extracts the inner part of config_register_addressmaps --
the part that knows about detecting wildcard addresses addresses --
and makes it into a new function. The new function is deliberately
not moved or reindented, so that the diff is smaller.
I need this to fix bug 6244.
Thanks to the changes we started making with SocksPort and friends
in 0.2.3.3-alpha, any of our code that did "if (options->Sockport)"
became wrong, since "SocksPort 0" would make that test true whereas
using the default SocksPort value would make it false. (We didn't
actually do "if (options->SockPort)" but we did have tests for
TransPort. When we moved DirPort, ORPort, and ControlPort over to
the same system in 0.2.3.9-alpha, the problem got worse, since our
code is littered with checks for DirPort and ORPort as booleans.
This code renames the current linelist-based FooPort options to
FooPort_lines, and adds new FooPort_set options which get set at
parse-and-validate time on the or_options_t. FooPort_set is true
iff we will actually try to open a listener of the given type. (I
renamed the FooPort options rather than leave them alone so that
every previous user of a FooPort would need to get inspected, and so
that any new code that forgetfully uses FooPort will need fail to
compile.)
Fix for bug 6507.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
The SMARTLIST_FOREACH macro is more convenient than BEGIN/END when
you have a nice short loop body, but using it for long bodies makes
your preprocessor tell the compiler that all the code is on the same
line. That causes grief, since compiler warnings and debugger lines
will all refer to that one line.
So, here's a new style rule: SMARTLIST_FOREACH blocks need to be
short.
The defense counts the circuit failure rate for each guard for the past N
circuits. Failure is defined as the ability to complete a first hop, but not
finish completing the circuit all the way to the exit.
If the failure rate exceeds a certain amount, a notice is emitted.
If it exceeds a greater amount, a warn is emitted and the guard is disabled.
These values are governed by consensus parameters which we intend to tune as
we perform experiments and statistical simulations.
From what I can tell, this configuration is usually a mistake, and
leads people to think that all their traffic is getting proxied when
in fact practically none of it is. Resolves the issue behind "bug"
4663.
The function is not guaranteed to NUL-terminate its output. It
*is*, however, guaranteed not to generate more than two bytes per
multibyte character (plus terminating nul), so the general approach
I'm taking is to try to allocate enough space, AND to manually add a
NUL at the end of each buffer just in case I screwed up the "enough
space" thing.
Fixes bug 5909.
This feature can make Tor relays less identifiable by their use of the
mod_ssl DH group, but at the cost of some usability (#4721) and bridge
tracing (#6087) regressions.
We should try to turn this on by default again if we find that the
mod_ssl group is uncommon and/or we move to a different DH group size
(see #6088). Before we can do so, we need a fix for bugs #6087 and
Resolves ticket #5598 for now.
These stats are currently discarded, but we might as well
hard-disable them on bridges, to be clean.
Fix for bug 5824; bugfix on 0.2.1.17-rc.
Patch originally by Karsten Loesing.
Also, try to resolve some doxygen issues. First, define a magic
"This is doxygen!" macro so that we take the correct branch in
various #if/#else/#endifs in order to get the right documentation.
Second, add in a few grouping @{ and @} entries in order to get some
variables and fields to get grouped together.
Roger explains at
http://archives.seul.org/tor/talk/Nov-2011/msg00209.html :
"If you list your bridge as part of your family in the relay
descriptor, then everybody can learn your bridge fingerprint, and
they can look up your bridge's descriptor (and thus location) at
the bridge directory authority."
Now, we can't stop relays from listing bridges, but we can warn when
we notice a bridge listing anybody, which might help some.
This fixes bug 4657; it's a fix on 0.2.0.3-alpha, where bridges were
first introduced.
Previously, we skipped everything that got invoked from
options_init_from_torrc. But some of the stuff in
options_act_reversible and options_act is actually important, like
reopening the logs.
Now, a SIGHUP always makes the effects of an options_set() happen,
even though the options haven't changed.
Fix for bug 5095; bugfix on 0.2.1.9-alpha, which introduced
__ReloadTorrcOnSIGHUP.
Instead, allow packagers to put a 'TOR_BUILD_TAG' field in the
server descriptor to indicate a platform-specific value, if they
need to. (According to weasel, this was his use for the git- tag
previously.)
This is part of 2988
* Document fmt_addr_impl() and friends.
* Parenthesize macro arguments.
* Rename get_first_listener_addrport_for_pt() to
get_first_listener_addrport_string().
* Handle port_cfg_t with no_listen.
* Handle failure of router_get_active_listener_port_by_type().
* Add an XXX to router_get_active_listener_port_by_type().
This is just refactoring work here. The old logic was kind of
convoluted, especially after the bug 5572 fix. We don't actually need to
distinguish so many cases here. Dropping detection of the
"!old_options || !old_options->DynamicDHGroups" case is fine because
that's the same that we'd do for clients.
Also add a changes file for bug 5572.
This fixes a side-channel attack on the (fortunately unused!)
BridgePassword option for bridge authorities. Fix for bug 5543;
bugfix on 0.2.0.14-alpha.
Introduce get_first_listener_addrport_for_pt() which returns a string
containing the addrport of the first listener we could find. Use it to
form the TOR_PT_ORPORT managed proxy protocol line.
This commit is completely mechanical; I used this perl script to make it:
#!/usr/bin/perl -w -i.bak -p
if (/^\s*\#/) {
s/MS_WINDOWS/_WIN32/g;
s/\bWIN32\b/_WIN32/g;
}
These were found by looking for tor_snprintf() instances that were
preceeded closely by tor_malloc(), though I probably converted some
more snprintfs as well.
(In every case, make sure that the length variable (if any) is
removed, renamed, or lowered, so that anything else that might have
assumed a longer buffer doesn't exist.)
These were found by looking for tor_snprintf() instances that were
followed closely by tor_strdup(), though I probably converted some
other snprintfs as well.
(To ensure correctness, in every case, make sure that the temporary
variable is deleted, renamed, or lowered in scope, so we can't have
any bugs related to accidentally relying on the no-longer-filled
variable.)
The Tor2webMode torrc option is still required to run a Tor client in
'tor2web mode', but now it can't be turned on at runtime in a normal build
of Tor. (And a tor2web build of Tor can't be used as a normal Tor client,
so we don't have to worry as much about someone distributing packages with
this particular pistol accessible to normal users.)
It might be nice to support this someday, but for now it would fail
with an infinite remap cycle. (If I say "remap * *.foo.exit",
then example.com ->
example.com.foo.exit ->
example.com.foo.exit.foo.exit ->
example.com.foo.exit.foo.exit.foo.exit -> ...)
In this new representation for wildcarded addresses, there are no
longer any 'magic addresses': rather, "a.b c.d", "*.a.b c.d" and
"*.a.b *.c.d" are all represented by a mapping from "a.b" to "c.d". we
now distinguish them by setting bits in the addressmap_entry_t
structure, where src_wildcard is set if the source address had a
wildcard, and dst_wildcard is set if the target address had a
wildcard.
This lets the case where "*.a.b *.c.d" or "*.a.b c.d" remap the
address "a.b" get handled trivially, and lets us simplify and improve
the addressmap_match_superdomains implementation: we can now have it
run in O(parts of address) rather than O(entries in addressmap).
1. Only allow '*.' in MapAddress expressions. Ignore '*ample.com' and '.example.com'.
This has resulted in a slight refactoring of config_register_addressmaps.
2. Add some more detail to the man page entry for AddressMap.
3. Fix initialization of a pointer to NULL rather than 0.
4. Update the unit tests to cater for the changes in 1 and test more explicitly for
recursive mapping.
1. Implement the following mapping rules:
MapAddress a.b.c d.e.f # This is what we have now
MapAddress .a.b.c d.e.f # Replaces any address ending with .a.b.c with d.e.f
MapAddress .a.b.c .d.e.f # Replaces the .a.b.c at the end of any addr with .d.e.f
(Note that 'a.b.c .d.e.f' is invalid, and will be rejected.)
2. Add tests for the new rules.
3. Allow proper wildcard annotation, i.e. '*.d.e' '.d.e' will still work.
4. Update addressmap_entry_t with an is_wildcard member.
This code handles the new ORPort options, and incidentally makes all
remaining port types use the new port configuration systems.
There are some rough edges! It doesn't do well in the case where your
Address says one thing but you say to Advertise another ORPort. It
doesn't handle AllAddrs. It doesn't actually advertise anything besides
the first listed advertised IPv4 ORPort and DirPort. It doesn't do
port forwarding to them either.
It's not tested either, it needs more documentation, and it probably
forgets to put the milk back in the refrigerator.
Some controllers want this so they can mess with Tor's configuration
for a while via the control port before actually letting Tor out of
the house.
We do this with a new DisableNetwork option, that prevents Tor from
making any outbound connections or binding any non-control
listeners. Additionally, it shuts down the same functionality as
shuts down when we are hibernating, plus the code that launches
directory downloads.
To make sure I didn't miss anything, I added a clause straight to
connection_connect, so that we won't even try to open an outbound
socket when the network is disabled. In my testing, I made this an
assert, but since I probably missed something, I've turned it into a
BUG warning for testing.
This will mainly help distributors by giving a way to set system or package
defaults that a user can override, and that a later package can replace.
No promises about the particular future location or semantics for this:
we will probably want to tweak it some before 0.2.3.x-rc
The file is searched for in CONFDIR/torrc-defaults , which can be
overridden with the "--defaults-torrc" option on the command line.
This starts an effort to refactor torrc handling code to make it easier
to live with. It makes it possible to override exit policies from the
command line, and possible to override (rather than append to) socksport
lists from the command line.
It'll be necessary to make a "base" torrc implementation work at all.
Instead of only writing the dynamic DH prime modulus to a file, write
the whole DH parameters set for forward compatibility. At the moment
we only accept '2' as the group generator.
The DH parameters gets stored in base64-ed DER format to the
'dynamic_dh_params' file.
We used to do init_keys() if DynamicDHGroups changed after a HUP, so
that the dynamic DH modulus was stored on the disk. Since we are now
doing dynamic DH modulus storing in crypto.c, we can simply initialize
the TLS context and be good with it.
Introduce a new function router_initialize_tls_context() which
initializes the TLS context and use it appropriately.
Completely disable stats if we aren't running as a relay. We won't
collect any anyway, so setting up the infrastructure for them and
logging about them is wrong. This also removes a confusing log
message that clients without a geoip db would have seen.
Fixes bug 4353.
When running with IOCP, we are in theory able to use userspace-
allocated buffers to avoid filling up the stingy amount of kernel
space allocated for sockets buffers.
The bufferevent_async implementation in Libevent provides this
ability, in theory. (There are likely to be remaining bugs). This
patch adds a new option that, when using IOCP bufferevents, sets
each socket's send and receive buffers to 0, so that we should use
this ability.
When all the bugs are worked out here, if we are right about bug 98,
this might solve or mitigate bug 98.
This option is experimental and will likely require lots of testing
and debugging.
This way, all of the DA operators can upgrade immediately, without nuking
every client's set of entry guards as soon as a majority of them upgrade.
Until enough guards have upgraded, a majority of dirauths should set this
config option so that there are still enough guards in the network. After
a few days pass, all dirauths should use the default.
This is used for the bridge authority currently, to get a better
intuition on how many descriptors are actually fetched from it and how
many fetches happen in total.
Implements ticket 4200.
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Without this patch, Tor wasn't sure whether it would be hibernating or
not, so it postponed opening listeners until after the privs had been
dropped. This doesn't work so well for low ports. Bug was introduced in
the fix for bug 2003. Fixes bug 4217, reported by Zax and katmagic.
Thanks!
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
This is the cherry-picked 499661524b.
With managed proxies you would always get the error message:
"You have a Bridge line using the X pluggable transport, but there
doesn't seem to be a corresponding ClientTransportPlugin line."
because the check happened directly after parse_client_transport_line()
when managed proxies were not fully configured and their transports
were not registered.
The fix is to move the validation to run_scheduled_events() and make
sure that all managed proxies are configured first.
* Create mark/sweep functions for transports.
* Create a transport_resolve_conflicts() function that tries to
resolve conflicts when registering transports.
Previously the FooPort was ignored and the default used instead,
causing Tor to bind to the wrong port if FooPort and the default
port don't match or the CONN_TYPE_FOO_LISTENER has no default port.
Fixes#3936.
* Use strcmpstart() instead of strcmp(x,y,strlen(y)).
* Warn the user if the managed proxy failed to launch.
* Improve function documentation.
* Use smartlist_len() instead of n_unconfigured_proxies.
* Split managed_proxy_destroy() to managed_proxy_destroy()
and managed_proxy_destroy_with_transports().
* Constification.
One-hop dirconn streams all share a session group, and get the
ISO_SESSIONGRP flag: they may share circuits with each other and
nothing else.
Anonymized dirconn streams get a new internal-use-only ISO_STREAM
flag: they may not share circuits with anything, including each other.
This is mainly meant as a way to keep clients from accidentally
DOSing themselves by (e.g.) enabling IsolateDestAddr or
IsolateDestPort on a port that they use for HTTP.
This patch adds fields to track how streams should be isolated, and
ensures that those fields are set correctly. It also adds fields to
track what streams can go on a circuit, and adds functions to see
whether a streams can go on a circuit and update the circuit
accordingly. Those functions aren't yet called.
Proposal 171 gives us a new syntax for parsing client port options.
You can now have as many FooPort options as you want (for Foo in
Socks, Trans, DNS, NATD), and they can have address:port arguments,
and you can specify the level of isolation on those ports.
Additionally, this patch refactors the client port parsing logic to
use a new type, port_cfg_t. Previously, ports to be bound were
half-parsed in config.c, and later re-parsed in connection.c when
we're about to bind them. Now, parsing a port means converting it
into a port_cfg_t, and binding it uses only a port_cfg_t, without
needing to parse the user-provided strings at all.
We should do a related refactoring on other port types. For
control ports, that'll be easy enough. For ORPort and DirPort,
we'll want to do this when we solve proposal 118 (letting servers
bind to and advertise multiple ports).
This implements tickets 3514 and 3515.
