Ian's original message:
The current code actually correctly handles queued data at the
Exit; if there is queued data in a EXIT_CONN_STATE_CONNECTING
stream, that data will be immediately sent when the connection
succeeds. If the connection fails, the data will be correctly
ignored and freed. The problem with the current server code is
that the server currently drops DATA cells on streams in the
EXIT_CONN_STATE_CONNECTING state. Also, if you try to queue data
in the EXIT_CONN_STATE_RESOLVING state, bad things happen because
streams in that state don't yet have conn->write_event set, and so
some existing sanity checks (any stream with queued data is at
least potentially writable) are no longer sound.
The solution is to simply not drop received DATA cells while in
the EXIT_CONN_STATE_CONNECTING state. Also do not send SENDME
cells in this state, so that the OP cannot send more than one
window's worth of data to be queued at the Exit. Finally, patch
the sanity checks so that streams in the EXIT_CONN_STATE_RESOLVING
state that have buffered data can pass.
[...] Here is a simple patch. It seems to work with both regular
streams and hidden services, but there may be other corner cases
I'm not aware of. (Do streams used for directory fetches, hidden
services, etc. take a different code path?)
Right now, we only consider sending stream-level SENDME cells when we
have completely flushed a connection_edge's outbuf, or when it sends
us a DATA cell. Neither of these is ideal for throughput.
This patch changes the behavior so we now call
connection_edge_consider_sending_sendme when we flush _some_ data from
an edge outbuf.
Fix for bug 2756; bugfix on svn r152.
Resolved nontrivial conflict around rewrite_x_address_for_bridge and
learned_bridge_descriptor. Now, since leanred_bridge_descriptor works
on nodes, we must make sure that rewrite_node_address_for_bridge also
works on nodes.
Conflicts:
src/or/circuitbuild.c
hid_serv_responsible_for_desc_id's return value is never negative, and
there is no need to search through the consensus to find out whether we
are responsible for a descriptor ID before we look in our cache for a
descriptor.
Name the magic value "10" rather than re-deriving it.
Comment more.
Use the pattern that works for periodic timers, not the pattern that
doesn't work. ;)
It is important to verify the uptime claim of a relay instead of just
trusting it, otherwise it becomes too easy to blackhole a specific
hidden service. rephist already has data available that we can use here.
Bugfix on 0.2.0.10-alpha.
Partial backport of daa0326aaa .
Resolves bug 2402. Bugfix on 0.2.1.15 (for the part where we switched to
git) and on 0.2.1.30 (for the part where we dumped micro-revisions.)
The calculation of when to send the logmessage was correct, but we
didn't give the correct number of relays required: We want more than
half of all authorities we know about. Fixes bug 2663.
This fixes a remotely triggerable assert on directory authorities, who
don't handle descriptors with ipv6 contents well yet. We will want to
revert this once we're ready to handle ipv6.
Issue raised by lorth on #tor, who wasn't able to use Tor anymore.
Analyzed with help from Christian Fromme. Fix suggested by arma. Bugfix
on 0.2.1.3-alpha.
We want to use the discard port correctly, so a htons() was missing.
Also we need to set it correctly depending on address family.
Review provided by danieldg
SSL_*_app_data uses ex_data index 0, which will be the first one allocated
by SSL_get_ex_new_index. Thus, if we ever started using the ex_data feature
for some other purpose, or a library linked to Tor ever started using
OpenSSL's ex_data feature, Tor would break in spectacular and mysterious
ways. Using the SSL_*_ex_data functions directly now may save us from
that particular form of breakage in the future.
But I would not be surprised if using OpenSSL's ex_data functions at all
(directly or not) comes back to bite us on our backends quite hard. The
specified behaviour of dup_func in the man page is stupid, and
crypto/ex_data.c is a horrific mess.
This should fix a bug that special ran into, where if your state file
didn't record period maxima, it would never decide that it had
successfully parsed itself unless you got lucky with your
uninitialized-variable values.
This patch also tries to improve error messags in the case where a
maximum value legitimately doesn't parse.
In private networks, the defaults for some options are changed. This
means that in options_validate(), where we're testing that the defaults
are what we think they are, we fail. Use a workaround by setting a
hidden configuration option _UsingTestingTorNetwork when we have altered
the configuration this way, so that options_validate() can do the right
thing.
Fixes bug 2250, bugfix on 0.2.1.2-alpha (the version introducing private
network options).
Changed received_netinfo_from_trusted_dir into a
tristate in order to keep track of whether we have
already tried contacting a trusted dir. So we don't
send multiple requests if we get a bunch of skews.
The underlying fix is to stop indicating requests "ns" consensuses by
putting NULL in their requested_resource field: we already had a
specialized meaning for requested_resource==NULL, which was (more or
less) "Treat a failure here as a network failure, since it's too early
to possibly be a resource or directory failure." Overloading the two
meant that very early microdesc consensus download failures would get
treated as ns consensus download failures, so the failure count there
would get incremented, but the microdesc download would get retried
immediately in an infinite loop.
Fix for bug2381. Diagnosed by mobmix.
Sets:
* Documentation
* Logging domain
* Configuration option
* Scheduled event
* Makefile
It also creates status.c and the log_heartbeat() function.
All code was written by Sebastian Hahn. Commit message was
written by me (George Kadianakis).
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
(Backport from 0.2.2's 5ed73e3807)
Patch our implementation of tor_lockfile_lock() to handle this case
correctly. Also add a note that blocking behaviour differs from windows
to *nix. Fixes bug 2504, issue pointed out by mobmix.
rransom noticed that a change of ORPort is just as bad as a change of IP
address from a client's perspective, because both mean that the relay is
not available to them while the new information hasn't propagated.
Change the bug1035 fix accordingly.
Also make sure we don't log a bridge's IP address (which might happen
when we are the bridge authority).
It is often not entirely clear what options Tor was built with, so it
might not be immediately obvious which config file Tor is using when it
found one. Log the config file at startup.
When calling circuit_build_times_shuffle_and_store_array, we were
passing a uint32_t as an int. arma is pretty sure that this can't
actually cause a bug, because of checks elsewhere in the code, but
it's best not to pass a uint32_t as an int anyway.
Found by doorss; fix on 0.2.2.4-alpha.
We detect and reject said attempts if there is no chosen exit node or
circuit: connecting to a private addr via a randomly chosen exit node
will usually fail (if all exits reject private addresses), is always
ill-defined (you're not asking for any particular host or service),
and usually an error (you've configured all requests to go over Tor
when you really wanted to configure all _remote_ requests to go over
Tor).
This can also help detect forwarding loop requests.
Found as part of bug2279.
Left circuit_build_times_get_bw_scale() uncommented because it is in the wrong
place due to an improper bug2317 fix. It needs to be moved and renamed, as it
is not a cbt parameter.
To quote arma: "So instead of stopping your CBT from screaming, you're just
going to throw it in the closet and hope you can't hear it?"
Yep. The log message can happen because at 95% point on the curve, we can be
way beyond the max timeout we've seen, if the curve has few points and is
shallow.
Also applied Nick's rule of thumb for rewriting some other notice log messages
to read like how you would explain them to a raving lunatic on #tor who was
shouting at you demanding what they meant. Hopefully the changes live up to
that standard.
If we got a signed digest that was shorter than the required digest
length, but longer than 20 bytes, we would accept it as long
enough.... and then immediately fail when we want to check it.
Fixes bug 2409; bug in 0.2.2.20-alpha; found by piebeer.
Previously if you wanted to say "All messages except network
messages", you needed to say "[*,~net]" and if you said "[~net]" by
mistake, you would get no messages at all. Now, if you say "[~net]",
you get everything except networking messages.
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
When we stopped using svn, 0.2.1.x lost the ability to notice its svn
revision and report it in the version number. However, it kept
looking at the micro-revision.i file... so if you switched to master,
built tor, then switched to 0.2.1.x, you'd get a micro-revision.i file
from master reported as an SVN tag. This patch takes out the "include
the svn tag" logic entirely.
Bugfix on 0.2.1.15-rc; fixes bug 2402.
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
We need to make sure that the worst thing that a weird consensus param
can do to us is to break our Tor (and only if the other Tors are
reliably broken in the same way) so that the majority of directory
authorities can't pull any attacks that are worse than the DoS that
they can trigger by simply shutting down.
One of these worse things was the cbtnummodes parameter, which could
lead to heap corruption on some systems if the value was sufficiently
large.
This commit fixes this particular issue and also introduces sanity
checking for all consensus parameters.
Our public key functions assumed that they were always writing into a
large enough buffer. In one case, they weren't.
(Incorporates fixes from sebastian)
In dnsserv_resolved(), we carefully made a nul-terminated copy of the
answer in a PTR RESOLVED cell... then never used that nul-terminated
copy. Ouch.
Surprisingly this one isn't as huge a security problem as it could be.
The only place where the input to dnsserv_resolved wasn't necessarily
nul-terminated was when it was called indirectly from relay.c with the
contents of a relay cell's payload. If the end of the payload was
filled with junk, eventdns.c would take the strdup() of the name [This
part is bad; we might crash there if the cell is in a bad part of the
stack or the heap] and get a name of at least length
495[*]. eventdns.c then rejects any name of length over 255, so the
bogus data would be neither transmitted nor altered.
[*] If the name was less than 495 bytes long, the client wouldn't
actually be reading off the end of the cell.
Nonetheless this is a reasonably annoying bug. Better fix it.
Found while looking at bug 2332, reported by doorss. Bugfix on
0.2.0.1-alpha.
The C standard says that INT32_MAX is supposed to be a signed
integer. On platforms that have it, we get the correct
platform-defined value. Our own replacement, however, was
unsigned. That's going to cause a bug somewhere eventually.
Previously, we only looked at up to 128 bytes. This is a bad idea
since socks messages can be at least 256+x bytes long. Now we look at
up to 512 bytes; this should be enough for 0.2.2.x to handle all valid
SOCKS messages. For 0.2.3.x, we can think about handling trickier
cases.
Fixes 2330. Bugfix on 0.2.0.16-alpha.
Right now, Tor routers don't save the maxima values from the
bw_history_t between sessions. That's no good, since we use those
values to determine bandwidth. This code adds a new BWHist.*Maximum
set of values to the state file. If they're not present, we estimate
them by taking the observed total bandwidth and dividing it by the
period length, which provides a lower bound.
This should fix bug 1863. I'm calling it a feature.
Previously, our state parsing code would fail to parse a bwhist
correctly if the Interval was anything other than the default
hardcoded 15 minutes. This change makes the parsing less incorrect,
though the resulting history array might get strange values in it if
the intervals don't match the one we're using. (That is, if stuff was
generated in 15 minute intervals, and we read it into an array that
expects 30 minute intervals, we're fine, since values can be combined
pairwise. But if we generate data at 30 minute intervals and read it
into 15 minute intervals, alternating buckets will be empty.)
Bugfix on 0.1.1.11-alpha.
The trick of looping from i=0..4 , switching on i to set up some
variables, then running some common code is much better expressed by
just calling a function 4 times with 4 sets of arguments. This should
make the code a little easier to follow and maintain here.
An object, you'll recall, is something between -----BEGIN----- and
-----END----- tags in a directory document. Some of our code, as
doorss has noted in bug 2352, could assert if one of these ever
overflowed SIZE_T_CEILING but not INT_MAX. As a solution, I'm setting
a maximum size on a single object such that neither of these limits
will ever be hit. I'm also fixing the INT_MAX checks, just to be sure.
When using libevent 2, we use evdns_base_resolve_*(). When not, we
fake evdns_base_resolve_*() using evdns_resolve_*().
Our old check was looking for negative values (like libevent 2
returns), but our eventdns.c code returns 1. This code makes the
check just test for nonzero.
Note that this broken check was not for _resolve_ failures or even for
failures to _launch_ a resolve: it was for failures to _create_ or
_encode_ a resolve request.
Bug introduced in 81eee0ecfff3dac1e9438719d2f7dc0ba7e84a71; found by
lodger; uploaded to trac by rransom. Bug 2363. Fix on 0.2.2.6-alpha.
This was originally a patch provided by pipe
(http://www.mail-archive.com/or-talk@freehaven.net/msg13085.html) to
provide a method for controllers to query the total amount of traffic
tor has handled (this is a frequently requested piece of information
by relay operators).
C99 allows a syntax for structures whose last element is of
unspecified length:
struct s {
int elt1;
...
char last_element[];
};
Recent (last-5-years) autoconf versions provide an
AC_C_FLEXIBLE_ARRAY_MEMBER test that defines FLEXIBLE_ARRAY_MEMBER
to either no tokens (if you have c99 flexible array support) or to 1
(if you don't). At that point you just use offsetof
[STRUCT_OFFSET() for us] to see where last_element begins, and
allocate your structures like:
struct s {
int elt1;
...
char last_element[FLEXIBLE_ARRAY_MEMBER];
};
tor_malloc(STRUCT_OFFSET(struct s, last_element) +
n_elements*sizeof(char));
The advantages are:
1) It's easier to see which structures and elements are of
unspecified length.
2) The compiler and related checking tools can also see which
structures and elements are of unspecified length, in case they
wants to try weird bounds-checking tricks or something.
3) The compiler can warn us if we do something dumb, like try
to stack-allocate a flexible-length structure.
We were not decrementing "available" every time we did
++next_virtual_addr in addressmap_get_virtual_address: we left out the
--available when we skipped .00 and .255 addresses.
This didn't actually cause a bug in most cases, since the failure mode
was to keep looping around the virtual addresses until we found one,
or until available hit zero. It could have given you an infinite loop
rather than a useful message, however, if you said "VirtualAddrNetwork
127.0.0.255/32" or something broken like that.
Spotted by cypherpunks
We were decrementing "available" twice for each in-use address we ran
across. This would make us declare that we ran out of virtual
addresses when the address space was only half full.
On Windows, we never use pthreads, since it doesn't usually exist,
and when it does it tends to be a little weirdly-behaved. But some
mingw installations have a pthreads installed, so autoconf detects
pthread.h and tells us about it. This would make us include
pthread.h, which could make for trouble when the iffy pthread.h
tried to include config.h.
This patch changes compat.h so that we never include pthread.h on
Windows. Fixes bug 2313; bugfix on 0.1.0.1-rc.
evbuffer_pullup does nothing and returns NULL if the caller asks it to
linearize more data than the buffer contains.
Introduced in 9796b9bfa6.
Reported by piebeer; fixed with help from doors.
Libevent 2.0 has a "changelist" feature that avoids making redundant
syscalls if we wind up doing a lot of event_add/event_del operations
on the same fd in a row. Unfortunately, due to a weird design
choice in Linux, it doesn't work right with epoll when multiple fds
refer to the same socket (e.g., one is a dup() of the other). We
don't dup() anything we give to Libevent, though, so it is safe for
us to explicitly turn this feature on.
If a SOCKS5 client insists on authentication, allow it to
negotiate a connection with Tor's SOCKS server successfully.
Any credentials the client provides are ignored.
This allows Tor to work with SOCKS5 clients that can only
support 'authenticated' connections.
Also add a bunch of basic unit tests for SOCKS4/4a/5 support
in buffers.c.
It's all too easy in C to convert an unsigned value to a signed one,
which will (on all modern computers) give you a huge signed value. If
you have a size_t value of size greater than SSIZE_T_MAX, that is way
likelier to be an underflow than it is to be an actual request for
more than 2gb of memory in one go. (There's nothing in Tor that
should be trying to allocate >2gb chunks.)
If you had TIME_MAX > INT_MAX, and your "time_to_exhaust_bw =
accountingmax/expected_bandwidth_usage * 60" calculation managed to
overflow INT_MAX, then your time_to_consider value could underflow and
wind up being rediculously low or high. "Low" was no problem;
negative values got caught by the (time_to_consider <= 0) check.
"High", however, would get you a wakeup time somewhere in the distant
future.
The fix is to check for time_to_exhaust_bw overflowing INT_MAX, not
TIME_MAX: We don't allow any accounting interval longer than a month,
so if time_to_exhaust_bw is significantly larger than 31*24*60*60, we
can just clip it.
This is a bugfix on 0.0.9pre6, when accounting was first introduced.
It fixes bug 2146, unless there are other causes there too. The fix
is from boboper. (I tweaked it slightly by removing an assignment
that boboper marked as dead, and lowering a variable that no longer
needed to be function-scoped.)
The old logic would have us fetch from authorities if we were refusing
unknown exits and our exit policy was reject*. Instead, we want to
fetch from authorities if we're refusing unknown exits and our exit
policy is _NOT_ reject*.
Fixed by boboper. Fixes more of 2097. Bugfix on 0.2.2.16-alpha.
We use a hash of the identity key to seed a prng to tell when an
accounting period should end. But thanks to the bug998 changes,
clients no longer have server-identity keys to use as a long-term seed
in accounting calculations. In any case, their identity keys (as used
in TLS) were never never fixed. So we can just set the wakeup time
from a random seed instead there. Still open is whether everybody
should be random.
This patch fixes bug 2235, which was introduced in 0.2.2.18-alpha.
Diagnosed with help from boboper on irc.
This is not the most beautiful fix for this problem, but it is the simplest.
Bugfix for 2205. Thanks to Sebastian and Mashael for finding the
bug, and boboper/cypherpunks for figuring out why it was happening
and how to fix it, and for writing a few fixes.
The reason the "streams problem" occurs is due to the complicated
interaction between Tor's congestion control and libevent. At some point
during the experiment, the circuit window is exhausted, which blocks all
edge streams. When a circuit level sendme is received at Exit, it
resumes edge reading by looping over linked list of edge streams, and
calling connection_start_reading() to inform libevent to resume reading.
When the streams are activated again, Tor gets the chance to service the
first three streams activated before the circuit window is exhausted
again, which causes all streams to be blocked again. As an experiment,
we reversed the order in which the streams are activated, and indeed the
first three streams, rather than the last three, got service, while the
others starved.
Our solution is to change the order in which streams are activated. We
choose a random edge connection from the linked list, and then we
activate streams starting from that chosen stream. When we reach the end
of the list, then we continue from the head of the list until our chosen
stream (treating the linked list as a circular linked list). It would
probably be better to actually remember which streams have received
service recently, but this way is simple and effective.
Doing so could make Libevent call Libevent from inside a Libevent
logging call, which is a recipe for reentrant confusion and
hard-to-debug crashes. This would especially hurt if Libevent
debug-level logging is enabled AND the user has a controller
watching for low-severity log messages.
Fix bug 2190; fix on 0.1.0.2-rc.
Doing so could make Libevent call Libevent from inside a Libevent
logging call, which is a recipe for reentrant confusion and
hard-to-debug crashes. This would especially hurt if Libevent
debug-level logging is enabled AND the user has a controller
watching for low-severity log messages.
Fix bug 2190; fix on 0.1.0.2-rc.
Sebastian notes (and I think correctly) that one of our ||s should
have been an &&, which simplifies a boolean expression to decide
whether to replace bridges. I'm also refactoring out the negation at
the start of the expression, to make it more readable.
Pick 5 seconds as the limit. 5 seconds is a compromise here between
making sure the user notices that the bad behaviour is (still) happening
and not spamming their log too much needlessly (the log message is
pretty long). We also keep warning every time if safesocks is
specified, because then the user presumably wants to hear about every
blocked instance.
(This is based on the original patch by Sebastian, then backported to
0.2.2 and with warnings split into their own function.)
Our checks that we don't exceed the 50 KB size limit of extra-info
descriptors apparently failed. This patch fixes these checks and reserves
another 250 bytes for appending the signature. Fixes bug 2183.
When intro->extend_info is created for an introduction point, it
only starts out with a nickname, not necessarily an identity digest.
Thus, doing router_get_by_digest isn't necessarily safe.
https://trac.torproject.org/projects/tor/ticket/1859
Use router_get_by_digest() instead of router_get_by_hexdigest()
in circuit_discard_optional_exit_enclaves() and
rend_client_get_random_intro(), per Nick's comments.
Using router_get_by_digest() in rend_client_get_random_intro() will
break hidden services published by Tor versions pre 0.1.2.18 and
0.2.07-alpha as they only publish by nickname. This is acceptable
however as these versions only publish to authority tor26 and
don't work for versions in the 0.2.2.x series anyway.
https://trac.torproject.org/projects/tor/ticket/1859
There are two problems in this bug:
1. When an OP makes a .exit request specifying itself as the exit, and the exit
is not yet listed, Tor gets all the routerinfos needed for the circuit but
discovers in circuit_is_acceptable() that its own routerinfo is not in the
routerdigest list and cannot be used. Tor then gets locked in a cycle of
repeating these two steps. When gathering the routerinfos for a circuit,
specifically when the exit has been chosen by .exit notation, Tor needs to
apply the same rules it uses later on when deciding if it can build a
circuit with those routerinfos.
2. A different bug arises in the above situation when the Tor instance's
routerinfo *is* listed in the routerlist, it shares its nickname with a
number of other Tor nodes, and it does not have 'Named' rights to its
nickname.
So for example, if (i) there are five nodes named Bob in the network, (ii) I
am running one of them but am flagged as 'Unnamed' because someone else
claimed the 'Bob' nickname first, and (iii) I run my Tor as both client
and exit the following can happen to me:
- I go to www.evil.com
- I click on a link www.evil.com.bob.exit
- My request will exit through my own Tor node rather than the 'Named'
node Bob or any of the others.
- www.evil.com now knows I am actually browsing from the same computer
that is running my 'Bob' node
So to solve both issues we need to ensure:
- When fulfilling a .exit request we only choose a routerinfo if it exists in
the routerlist, even when that routerinfo is ours.
- When getting a router by nickname we only return our own router information
if it is not going to be used for building a circuit.
We ensure this by removing the special treatment afforded our own router in
router_get_by_nickname(). This means the function will only return the
routerinfo of our own router if it is in the routerlist built from authority
info and has a unique nickname or is bound to a non-unique nickname.
There are some uses of router_get_by_nickname() where we are looking for the
router by name because of a configuration directive, specifically local
declaration of NodeFamilies and EntryNodes and other routers' declaration of
MyFamily. In these cases it is not at first clear if we need to continue
returning our own routerinfo even if our router is not listed and/or has a
non-unique nickname with the Unnamed flag.
The patch treats each of these cases as follows:
Other Routers' Declaration of MyFamily
This happens in routerlist_add_family(). If another router declares our router
in its family and our router has the Unnamed flag or is not in the routerlist
yet, should we take advantage of the fact that we know our own routerinfo to
add us in anyway? This patch says 'no, treat our own router just like any
other'. This is a safe choice because it ensures our client has the same view
of the network as other clients. We also have no good way of knowing if our
router is Named or not independently of the authorities, so we have to rely on
them in this.
Local declaration of NodeFamilies
Again, we have no way of knowing if the declaration 'NodeFamilies
Bob,Alice,Ringo' refers to our router Bob or the Named router Bob, so we have
to defer to the authorities and treat our own router like any other.
Local declaration of NodeFamilies
Again, same as above. There's also no good reason we would want our client to
choose it's own router as an entry guard if it does not meet the requirements
expected of any other router on the network.
In order to reduce the possibility of error, the patch also replaces two
instances where we were using router_get_by_nickname() with calls to
router_get_by_hexdigest() where the identity digest of the router
is available.
Sending a log message to a control port can cause Tor to allocate a buffer,
thereby changing the length of the freelist behind buf_shrink_freelists's back,
thereby causing an assertion to fail.
Fixes bug #1125.
Sending a log message to a control port can cause Tor to allocate a buffer,
thereby changing the length of the freelist behind buf_shrink_freelists's back,
thereby causing an assertion to fail.
Fixes bug #1125.
Having very long single lines with lots and lots of things in them
tends to make files hard to diff and hard to merge. Since our tools
are one-line-at-a-time, we should try to construct lists that way too,
within reason.
This incidentally turned up a few headers in configure.in that we were
for some reason searching for twice.
We would never actually enforce multiplicity rules when parsing
annotations, since the counts array never got entries added to it for
annotations in the token list that got added by earlier calls to
tokenize_string.
Found by piebeer.
We had a spelling discrepancy between the manpage and the source code
for some option. Resolve these in favor of the manpage, because it
makes more sense (for example, HTTP should be capitalized).
The code that makes use of the RunTesting option is #if 0, so setting
this option has no effect. Mark the option as obsolete for now, so that
Tor doesn't list it as an available option erroneously.
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
We need filtering bufferevent_openssl so that we can wrap around
IOCP bufferevents on Windows. This patch adds a temporary option to
turn on filtering mode, so that we can test it out on non-IOCP
systems to make sure it hasn't got any surprising bugs.
It also fixes some allocation/teardown errors in using
bufferevent_openssl as a filter.
Instead of rejecting a value that doesn't divide into 1 second, round to
the nearest divisor of 1 second and warn.
Document that the option only controls the granularity written by Tor to a
file or console log. It does not (for example) "batch up" log messages to
affect times logged by a controller, times attached to syslog messages, or
the mtime fields on log files.
In the case where old_router == NULL but sdmap has an entry for the
router, we can currently safely infer that the old_router was not a
bridge. Add an assert to ensure that this remains true, and fix the
logic not to die with the tor_assert(old_router) call.
In a2bb0bf we started using a separate client identity key. When we are
in "public server mode" (that means not a bridge) we will use the same
key. Reusing the key without doing the proper refcounting leads to a
segfault on cleanup during shutdown. Fix that.
Also introduce an assert that triggers if our refcount falls below 0.
That should never happen.
We now require that:
- Only actual servers should ever call get_server_identity_key
- If you're being a client or bridge, the client and server keys should
differ.
- If you're being a public relay, the client and server keys
should be the same.
When intro->extend_info is created for an introduction point, it
only starts out with a nickname, not necessarily an identity digest.
Thus, doing router_get_by_digest isn't necessarily safe.
https://trac.torproject.org/projects/tor/ticket/1859
Use router_get_by_digest() instead of router_get_by_hexdigest()
in circuit_discard_optional_exit_enclaves() and
rend_client_get_random_intro(), per Nick's comments.
Using router_get_by_digest() in rend_client_get_random_intro() will
break hidden services published by Tor versions pre 0.1.2.18 and
0.2.07-alpha as they only publish by nickname. This is acceptable
however as these versions only publish to authority tor26 and
don't work for versions in the 0.2.2.x series anyway.
Mainly, this comes from turning two lists that needed to be kept in
synch into a single list of structs. This should save a little RAM,
and make the code simpler.
The old comment was from before I tried a huge pile of crazy stuff to
make the inner loop faster. Short answer: GCC already knows how to
unroll loops pretty well. Other short answer: we should have made the
relay payload size an even multiple of 4, 8, or ideally 16.
There's no reason to keep a time_t and a struct timeval to represent
the same value: highres_created.tv_sec was the same as timestamp_created.
This should save a few bytes per circuit.
The short version is, "where we want to do it, we have nothing real to
chose from and we can't do it easily. Where it's easy to do, we have
no reason to do it yet."
Our old code correctly called bufferevent_flush() on linked
connections to make sure that the other side got an EOF event... but
it didn't call bufferevent_flush() when the connection wasn't
hold_open_until_flushed. Directory connections don't use
hold_open_until_flushed, so the linked exit connection never got an
EOF, so they never sent a RELAY_END cell to the client, and the
client never concluded that data had arrived.
The solution is to make the bufferevent_flush() code apply to _all_
closing linked conns whose partner is not already marked for close.
https://trac.torproject.org/projects/tor/ticket/1859
There are two problems in this bug:
1. When an OP makes a .exit request specifying itself as the exit, and the exit
is not yet listed, Tor gets all the routerinfos needed for the circuit but
discovers in circuit_is_acceptable() that its own routerinfo is not in the
routerdigest list and cannot be used. Tor then gets locked in a cycle of
repeating these two steps. When gathering the routerinfos for a circuit,
specifically when the exit has been chosen by .exit notation, Tor needs to
apply the same rules it uses later on when deciding if it can build a
circuit with those routerinfos.
2. A different bug arises in the above situation when the Tor instance's
routerinfo *is* listed in the routerlist, it shares its nickname with a
number of other Tor nodes, and it does not have 'Named' rights to its
nickname.
So for example, if (i) there are five nodes named Bob in the network, (ii) I
am running one of them but am flagged as 'Unnamed' because someone else
claimed the 'Bob' nickname first, and (iii) I run my Tor as both client
and exit the following can happen to me:
- I go to www.evil.com
- I click on a link www.evil.com.bob.exit
- My request will exit through my own Tor node rather than the 'Named'
node Bob or any of the others.
- www.evil.com now knows I am actually browsing from the same computer
that is running my 'Bob' node
So to solve both issues we need to ensure:
- When fulfilling a .exit request we only choose a routerinfo if it exists in
the routerlist, even when that routerinfo is ours.
- When getting a router by nickname we only return our own router information
if it is not going to be used for building a circuit.
We ensure this by removing the special treatment afforded our own router in
router_get_by_nickname(). This means the function will only return the
routerinfo of our own router if it is in the routerlist built from authority
info and has a unique nickname or is bound to a non-unique nickname.
There are some uses of router_get_by_nickname() where we are looking for the
router by name because of a configuration directive, specifically local
declaration of NodeFamilies and EntryNodes and other routers' declaration of
MyFamily. In these cases it is not at first clear if we need to continue
returning our own routerinfo even if our router is not listed and/or has a
non-unique nickname with the Unnamed flag.
The patch treats each of these cases as follows:
Other Routers' Declaration of MyFamily
This happens in routerlist_add_family(). If another router declares our router
in its family and our router has the Unnamed flag or is not in the routerlist
yet, should we take advantage of the fact that we know our own routerinfo to
add us in anyway? This patch says 'no, treat our own router just like any
other'. This is a safe choice because it ensures our client has the same view
of the network as other clients. We also have no good way of knowing if our
router is Named or not independently of the authorities, so we have to rely on
them in this.
Local declaration of NodeFamilies
Again, we have no way of knowing if the declaration 'NodeFamilies
Bob,Alice,Ringo' refers to our router Bob or the Named router Bob, so we have
to defer to the authorities and treat our own router like any other.
Local declaration of NodeFamilies
Again, same as above. There's also no good reason we would want our client to
choose it's own router as an entry guard if it does not meet the requirements
expected of any other router on the network.
In order to reduce the possibility of error, the patch also replaces two
instances where we were using router_get_by_nickname() with calls to
router_get_by_hexdigest() where the identity digest of the router
is available.
First start of a fix for bug2001, but my test network still isn't
working: the client and the server send each other VERSIONS cells,
but never notice that they got them.
Currently the unit tests test_util_spawn_background_* assume that they
are run from the Tor build directory. This is not the case when running
make distcheck, so the test will fail. This problem is fixed by autoconf
setting BUILDDIR to be the root of the Tor build directory, and this
preprocessor variable being used to specify the absolute path to
test-child. Also, in test-child, do not print out argv[0] because this will
no longer be predictable. Found by Sebastian Hahn.
* Make tor_tls_context_new internal to tortls.c, and return the new
tor_tls_context_t from it.
* Add a public tor_tls_context_init wrapper function to replace it.
- Responsibility of clearing hex_errno is no longer with caller
- More conservative bounds checking
- Length requirement of hex_errno documented
- Output format documented
Some of these functions only work for routerinfo-based nodes, and as
such are only usable for advisory purposes. Fortunately, our uses
of them are compatible with this limitation.
Also, make the NodeFamily option into a list of routersets. This
lets us git rid of router_in_nickname_list (or whatever it was
called) without porting it to work with nodes, and also lets people
specify country codes and IP ranges in NodeFamily
This was the only flag in routerstatus_t that we would previously
change in a routerstatus_t in a consensus. We no longer have reason
to do so -- and probably never did -- as you can now confirm more
easily than you could have done by grepping for is_running before
this patch.
The name change is to emphasize that the routerstatus_t is_running
flag is only there to tell you whether the consensus says it's
running, not whether it *you* think it's running.
A node_t is an abstraction over routerstatus_t, routerinfo_t, and
microdesc_t. It should try to present a consistent interface to all
of them. There should be a node_t for a server whenever there is
* A routerinfo_t for it in the routerlist
* A routerstatus_t in the current_consensus.
(note that a microdesc_t alone isn't enough to make a node_t exist,
since microdescriptors aren't usable on their own.)
There are three ways to get a node_t right now: looking it up by ID,
looking it up by nickname, and iterating over the whole list of
microdescriptors.
All (or nearly all) functions that are supposed to return "a router"
-- especially those used in building connections and circuits --
should return a node_t, not a routerinfo_t or a routerstatus_t.
A node_t should hold all the *mutable* flags about a node. This
patch moves the is_foo flags from routerinfo_t into node_t. The
flags in routerstatus_t remain, but they get set from the consensus
and should not change.
Some other highlights of this patch are:
* Looking up routerinfo and routerstatus by nickname is now
unified and based on the "look up a node by nickname" function.
This tries to look only at the values from current consensus,
and not get confused by the routerinfo_t->is_named flag, which
could get set for other weird reasons. This changes the
behavior of how authorities (when acting as clients) deal with
nodes that have been listed by nickname.
* I tried not to artificially increase the size of the diff here
by moving functions around. As a result, some functions that
now operate on nodes are now in the wrong file -- they should
get moved to nodelist.c once this refactoring settles down.
This moving should happen as part of a patch that moves
functions AND NOTHING ELSE.
* Some old code is now left around inside #if 0/1 blocks, and
should get removed once I've verified that I don't want it
sitting around to see how we used to do things.
There are still some unimplemented functions: these are flagged
with "UNIMPLEMENTED_NODELIST()." I'll work on filling in the
implementation here, piece by piece.
I wish this patch could have been smaller, but there did not seem to
be any piece of it that was independent from the rest. Moving flags
forces many functions that once returned routerinfo_t * to return
node_t *, which forces their friends to change, and so on.
The node_t type is meant to serve two key functions:
1) Abstracting difference between routerinfo_t and microdesc_t
so that clients can use microdesc_t instead of routerinfo_t.
2) Being a central place to hold mutable state about nodes
formerly held in routerstatus_t and routerinfo_t.
This patch implements a nodelist type that holds a node for every
router that we would consider using.
* MINIUPNPC rather than the generic UPNP
* Nick suggested a better abstraction model for tor-fw-helper
* Fix autoconf to build with either natpmp or miniupnpc
* Add AM_PROG_CC_C_O to fix automake complaint
* update spec to address nickm's concern
* refactor nat-pmp to match upnp state
* we prefer tor_snprintf to snprintf
* link properlty for tor_snprintf
* rename test_commandline_options to log_commandline_options
* cast this uint as an int
* detect possible FD_SETSIZE errors
* make note about future enhancements for natpmp
* add upnp enhancement note
* ChangeLog entry
* doxygen and check-spaces cleanup
* create tor-fw-helper.1.txt
tor-fw-helper is a command-line tool to wrap and abstract various
firewall port-forwarding tools.
This commit matches the state of Jacob's tor-fw-helper branch as of
23 September 2010.
(commit msg by Nick)
When picking bridges (or other nodes without a consensus entry (and
thus no bandwidth weights)) we shouldn't just trust the node's
descriptor. So far we believed anything between 0 and 10MB/s, where 0
would mean that a node doesn't get any use from use unless it is our
only one, and 10MB/s would be a quite siginficant weight. To make this
situation better, we now believe weights in the range from 20kB/s to
100kB/s. This should allow new bridges to get use more quickly, and
means that it will be harder for bridges to see almost all our traffic.
In the first 100 circuits, our timeout_ms and close_ms
are the same. So we shouldn't transition circuits to purpose
CIRCUIT_PURPOSE_C_MEASURE_TIMEOUT, since they will just timeout again
next time we check.
We really should ignore any timeouts that have *no* network activity for their
entire measured lifetime, now that we have the 95th percentile measurement
changes. Usually this is up to a minute, even on fast connections.
If we really want all this complexity for these stages here, we need to handle
it better for people with large timeouts. It should probably go away, though.
Rechecking the timeout condition was foolish, because it is checked on the
same codepath. It was also wrong, because we didn't round.
Also, the liveness check itself should be <, and not <=, because we only have
1 second resolution.
Specifically, a circ attempt that we'd launched while the network was
down could timeout after we've marked our entrynodes up, marking them
back down again. The fix is to annotate as bad the OR conns that were
around before we did the retry, so if a circuit that's attached to them
times out we don't do anything about it.
This is needed for IOCP, since telling the IOCP backend about all
your CPUs is a good idea. It'll also come in handy with asn's
multithreaded crypto stuff, and for people who run servers without
reading the manual.
