monero/src/device/device.hpp
cslashm 2c274e05fe Fix sub-address tx scan.
When additional keys was needed, the TX scan failed because the
derivation data was always recomputed with the main tx_key and not
the corresponding additional one.

Moreover this patch avoid perf decreasing when not using HW device.
2018-04-12 13:58:57 +02:00

208 lines
10 KiB
C++

// Copyright (c) 2017-2018, The Monero Project
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
/* Note about debug:
* To debug Device you can def the following :
* #define DEBUG_HWDEVICE
* Activate debug mechanism:
* - Add more trace
* - All computation done by device are checked by default device.
* Required IODUMMYCRYPT_HWDEVICE or IONOCRYPT_HWDEVICE for fully working
* #define IODUMMYCRYPT_HWDEVICE 1
* - It assumes sensitive data encryption is is off on device side. a XOR with 0x55. This allow Ledger Class to make check on clear value
* #define IONOCRYPT_HWDEVICE 1
* - It assumes sensitive data encryption is off on device side.
*/
#pragma once
#include "crypto/crypto.h"
#include "crypto/chacha.h"
#include "ringct/rctTypes.h"
#ifndef USE_DEVICE_LEDGER
#define USE_DEVICE_LEDGER 1
#endif
#if !defined(HAVE_PCSC)
#undef USE_DEVICE_LEDGER
#define USE_DEVICE_LEDGER 0
#endif
#if USE_DEVICE_LEDGER
#define WITH_DEVICE_LEDGER
#endif
// forward declaration needed because this header is included by headers in libcryptonote_basic which depends on libdevice
namespace cryptonote
{
struct account_public_address;
struct account_keys;
struct subaddress_index;
}
namespace hw {
namespace {
//device funcion not supported
#define dfns() \
throw std::runtime_error(std::string("device function not supported: ")+ std::string(__FUNCTION__) + \
std::string(" (device.hpp line ")+std::to_string(__LINE__)+std::string(").")); \
return false;
}
class device {
protected:
std::string name;
public:
device() {}
device(const device &hwdev) {}
virtual ~device() {}
explicit virtual operator bool() const = 0;
enum device_mode {
NONE,
TRANSACTION_CREATE_REAL,
TRANSACTION_CREATE_FAKE,
TRANSACTION_PARSE
};
/* ======================================================================= */
/* SETUP/TEARDOWN */
/* ======================================================================= */
virtual bool set_name(const std::string &name) = 0;
virtual const std::string get_name() const = 0;
virtual bool init(void) = 0;
virtual bool release() = 0;
virtual bool connect(void) = 0;
virtual bool disconnect(void) = 0;
virtual bool set_mode(device_mode mode) = 0;
/* ======================================================================= */
/* LOCKER */
/* ======================================================================= */
virtual void lock(void) = 0;
virtual void unlock(void) = 0;
virtual bool try_lock(void) = 0;
/* ======================================================================= */
/* WALLET & ADDRESS */
/* ======================================================================= */
virtual bool get_public_address(cryptonote::account_public_address &pubkey) = 0;
virtual bool get_secret_keys(crypto::secret_key &viewkey , crypto::secret_key &spendkey) = 0;
virtual bool generate_chacha_key(const cryptonote::account_keys &keys, crypto::chacha_key &key) = 0;
/* ======================================================================= */
/* SUB ADDRESS */
/* ======================================================================= */
virtual bool derive_subaddress_public_key(const crypto::public_key &pub, const crypto::key_derivation &derivation, const std::size_t output_index, crypto::public_key &derived_pub) = 0;
virtual crypto::public_key get_subaddress_spend_public_key(const cryptonote::account_keys& keys, const cryptonote::subaddress_index& index) = 0;
virtual std::vector<crypto::public_key> get_subaddress_spend_public_keys(const cryptonote::account_keys &keys, uint32_t account, uint32_t begin, uint32_t end) = 0;
virtual cryptonote::account_public_address get_subaddress(const cryptonote::account_keys& keys, const cryptonote::subaddress_index &index) = 0;
virtual crypto::secret_key get_subaddress_secret_key(const crypto::secret_key &sec, const cryptonote::subaddress_index &index) = 0;
/* ======================================================================= */
/* DERIVATION & KEY */
/* ======================================================================= */
virtual bool verify_keys(const crypto::secret_key &secret_key, const crypto::public_key &public_key) = 0;
virtual bool scalarmultKey(rct::key & aP, const rct::key &P, const rct::key &a) = 0;
virtual bool scalarmultBase(rct::key &aG, const rct::key &a) = 0;
virtual bool sc_secret_add( crypto::secret_key &r, const crypto::secret_key &a, const crypto::secret_key &b) = 0;
virtual crypto::secret_key generate_keys(crypto::public_key &pub, crypto::secret_key &sec, const crypto::secret_key& recovery_key = crypto::secret_key(), bool recover = false) = 0;
virtual bool generate_key_derivation(const crypto::public_key &pub, const crypto::secret_key &sec, crypto::key_derivation &derivation) = 0;
virtual bool conceal_derivation(crypto::key_derivation &derivation, const crypto::public_key &tx_pub_key, const std::vector<crypto::public_key> &additional_tx_pub_keys, const crypto::key_derivation &main_derivation, const std::vector<crypto::key_derivation> &additional_derivations) = 0;
virtual bool derivation_to_scalar(const crypto::key_derivation &derivation, const size_t output_index, crypto::ec_scalar &res) = 0;
virtual bool derive_secret_key(const crypto::key_derivation &derivation, const std::size_t output_index, const crypto::secret_key &sec, crypto::secret_key &derived_sec) = 0;
virtual bool derive_public_key(const crypto::key_derivation &derivation, const std::size_t output_index, const crypto::public_key &pub, crypto::public_key &derived_pub) = 0;
virtual bool secret_key_to_public_key(const crypto::secret_key &sec, crypto::public_key &pub) = 0;
virtual bool generate_key_image(const crypto::public_key &pub, const crypto::secret_key &sec, crypto::key_image &image) = 0;
// alternative prototypes available in libringct
rct::key scalarmultKey(const rct::key &P, const rct::key &a)
{
rct::key aP;
scalarmultKey(aP, P, a);
return aP;
}
rct::key scalarmultBase(const rct::key &a)
{
rct::key aG;
scalarmultBase(aG, a);
return aG;
}
/* ======================================================================= */
/* TRANSACTION */
/* ======================================================================= */
virtual bool open_tx(crypto::secret_key &tx_key) = 0;
virtual bool encrypt_payment_id(crypto::hash8 &payment_id, const crypto::public_key &public_key, const crypto::secret_key &secret_key) = 0;
bool decrypt_payment_id(crypto::hash8 &payment_id, const crypto::public_key &public_key, const crypto::secret_key &secret_key)
{
// Encryption and decryption are the same operation (xor with a key)
return encrypt_payment_id(payment_id, public_key, secret_key);
}
virtual bool ecdhEncode(rct::ecdhTuple & unmasked, const rct::key & sharedSec) = 0;
virtual bool ecdhDecode(rct::ecdhTuple & masked, const rct::key & sharedSec) = 0;
virtual bool add_output_key_mapping(const crypto::public_key &Aout, const crypto::public_key &Bout, const bool is_subaddress, const size_t real_output_index,
const rct::key &amount_key, const crypto::public_key &out_eph_public_key) = 0;
virtual bool mlsag_prehash(const std::string &blob, size_t inputs_size, size_t outputs_size, const rct::keyV &hashes, const rct::ctkeyV &outPk, rct::key &prehash) = 0;
virtual bool mlsag_prepare(const rct::key &H, const rct::key &xx, rct::key &a, rct::key &aG, rct::key &aHP, rct::key &rvII) = 0;
virtual bool mlsag_prepare(rct::key &a, rct::key &aG) = 0;
virtual bool mlsag_hash(const rct::keyV &long_message, rct::key &c) = 0;
virtual bool mlsag_sign(const rct::key &c, const rct::keyV &xx, const rct::keyV &alpha, const size_t rows, const size_t dsRows, rct::keyV &ss) = 0;
virtual bool close_tx(void) = 0;
} ;
struct reset_mode {
device& hwref;
reset_mode(hw::device& dev) : hwref(dev) { }
~reset_mode() { hwref.set_mode(hw::device::NONE);}
};
device& get_device(const std::string device_descriptor) ;
}