a427235e core: add a missing newline on a string to be logged (moneromooo-monero)
b6a2230e unit_tests: fix minor blockchain_db regression (moneromooo-monero)
c488eca5 hardfork: tone down some logs (moneromooo-monero)
- fix wrong block being used when a new block is received between
a node elaying a fluffy block and sending a new fluffy block
with txes a peer did not have
- misc a neverending ping pong requesting the same missing txids
when a new block is received in the meantime, causing the top
block to not be the one we need
- send the original fluffy block message block height when sending
a new fluffy block, not the current top height, which might
have been updated since
- avoid sending back the whole block blob when asking for txes,
send only the hash instead
- plus misc cleanup and additional debugging logs
3ff54bdd Check for correct thread before ending batch transaction (Howard Chu)
eaf8470b Must wait for previous batch to finish before starting new one (Howard Chu)
c903c554 Don't cache block height, always get from DB (Howard Chu)
eb1fb601 Tweak default db-sync-mode to fast:async:1 (Howard Chu)
0693cff9 Use batch transactions when syncing (Howard Chu)
If a checksum word is present, language detection would use
just the word prefixes. However, a set of word prefixes may
be found in more than one language, and so the wrong language
may be found first, which could then fail the checksum, since
the check may be done with a different unique prefix length
from the one it was created from.
We now make a checksum test when we we detect a language from
prefixes only, to make sure we have the correct one.
5783dd8c tests: add unit tests for uri parsing (moneromooo-monero)
82ba2108 wallet: add API and RPC to create/parse monero: URIs (moneromooo-monero)
d9001b43 epee: add functions to convert from URL format (ie, %XX values) (moneromooo-monero)
The fee will vary based on the base reward and the current
block size limit:
fee = (R/R0) * (M0/M) * F0
R: base reward
R0: reference base reward (10 monero)
M: block size limit
M0: minimum block size limit (60000)
F0: 0.002 monero
Starts applying at v4
bba6af9 wallet: cold wallet transaction signing (moneromooo-monero)
9872dcb wallet: fix log confusion between bytes and kilobytes (moneromooo-monero)
d9b0bf9 cryptonote_core: make extra field removal more generic (moneromooo-monero)
98f19d4 serialization: add support for serializing std::pair and std::list (moneromooo-monero)
This change adds the ability to create a new unsigned transaction
from a watch only wallet, and save it to a file. This file can
then be moved to another computer/VM where a cold wallet may load
it, sign it, and save it. That cold wallet does not need to have
a blockchain nor daemon. The signed transaction file can then be
moved back to the watch only wallet, which can load it and send
it to the daemon.
Two new simplewallet commands to use it:
sign_transfer (on the cold wallet)
submit_transfer (on the watch only wallet)
The transfer command used on a watch only wallet now writes an
unsigned transaction set in a file called 'unsigned_monero_tx'
instead of submitting the tx to the daemon as a normal wallet does.
The signed tx file is called 'signed_monero_tx'.
Keep the immediate direct deps at the library that depends on them,
declare deps as PUBLIC so that targets that link against that library
get the library's deps as transitive deps.
Break dep cycle between blockchain_db <-> crytonote_core.
No code refactoring, just hide cycle from cmake so that
it doesn't complain (cycles are allowed only between
static libs, not shared libs).
This is in preparation for supproting BUILD_SHARED_LIBS cmake
built-in option for building internal libs as shared.
Since this queries block heights for blocks that may or may not
exist, queries for non existing blocks would throw an exception,
and that would slow down the loop a lot. 7 seconds to go through
a 30 hash list.
Fix this by adding an optional return block height to block_exists
and using this instead. Actual errors will still throw an
exception.
This also cuts down on log exception spam.
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
The whole rct data apart from the MLSAGs is now included in
the signed message, to avoid malleability issues.
Instead of passing the data that's not serialized as extra
parameters to the verification API, the transaction is modified
to fill all that information. This means the transaction can
not be const anymore, but it cleaner in other ways.
Since these are needed at the same time as the output pubkeys,
this is a whole lot faster, and takes less space. Only outputs
of 0 amount store the commitment. When reading other outputs,
a fake commitment is regenerated on the fly. This avoids having
to rewrite the database to add space for fake commitments for
existing outputs.
This code relies on two things:
- LMDB must support fixed size records per key, rather than
per database (ie, all records on key 0 are the same size, all
records for non 0 keys are same size, but records from key 0
and non 0 keys do have different sizes).
- the commitment must be directly after the rest of the data
in outkey and output_data_t.
The mixRing (output keys and commitments) and II fields (key images)
can be reconstructed from vin data.
This saves some modest amount of space in the tx.
It may be suboptimal, but it's a pain to have to rebuild everything
when some of this changes.
Also, no clue why there seems to be two different code paths for
serializing a tx...
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.
This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
Compilation of bitmonero on Arch with gcc 6.1 results in the following
error:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp: In member function ‘virtual void TestDB::set_hard_fork_version(uint64_t, uint8_t)’:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp:132:5: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
if (versions.size() <= height) versions.resize(height+1); versions[height] = version;
This can be fixed by simply unfolding this line into three lines.
This is a list of existing output amounts along with the number
of outputs of that amount in the blockchain.
The daemon command takes:
- no parameters: all outputs with at least 3 instances
- one parameter: all outputs with at least that many instances
- two parameters: all outputs within that many instances
The default starts at 3 to avoid massive spamming of all dust
outputs in the blockchain, and is the current minimum mixin
requirement.
An optional vector of amounts may be passed, to request
histogram only for those outputs.
7658ac0 blockchain: revert handle_get_objects adding block id on tx not found (moneromooo-monero)
3a0f4d8 berkeleydb: fix delete/free mismatch (moneromooo-monero)
1642be2 minor bugfixes and refactoring (Thomas Winget)
098dcf2 unit_tests: fix mnemonics unit test testing invalid seeds (moneromooo-monero)
Some word triplets, such as "mugged names nail", are not valid
results from any 32 bit value. If used to decode a 32 bit value,
the result will therefore encode to a different word triplet.
Fix this by using random words converted from an actual random
bitstring, ensuring we always get valid triplets.
Also add some more tests, and rename some instances of
"version" and "add" for clarity.
NOTE: the starting height values are sometimes wrong.
I suspect this is due to the hard fork reorg code being
buggy, since they're good when syncing after the fact.
However, they're not actually used by the consensus code,
so I'm ignoring this for now, but this needs debugging.
Using major version would cause older daemons to reject those
blocks as they fail to deserialize blocks with a major version
which is not 1. There is no such restriction on the minor
version, so switching allows older daemons to coexist with
newer ones till the actual fork date, when most will hopefully
have updated already.
Also, for the same reason, we consider a vote for 0 to be a
vote for 1, since older daemons set minor version to 0.
This allows knowing the hard fork a block must obey in order to be
added to the blockchain. The previous semantics would use that new
block's version vote to determine this hard fork, which made it
impossible to use the rules to validate transactions entering the
tx pool (and made it impossible to validate a block before adding
it to the blockchain).
This ensures one can't instanciate a DNSResolver object by
mistake, but uses the singleton. A separate create static
function is added for cases where a new object is explicitely
needed.
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.
Add tests.
Test:
make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
DNSSEC is now implemented with the hardcoded key from unbound.
This will need to be not hardcoded in the future, but is okay for now.
Unit tests updated for DNSSEC (as well as for the fact that, contrary to
previous assumption, example.com does not have a static IP address).
Everything except actually *using* BlockchainBDB is wired up, but the db
itself is not yet working. Some error about user mem not large enough.
I think I know what this error means, but I can't determine the cause.
Notes: BerkeleyDB does not allow 0-indexing in its recno type databases,
so block numbers *in the database* will be 1-indexed. Modifications
to indexing have been made as needed.
+toc -doc -drmonero
Fixed the windows path, and improved logging and data
(for graph) logging, fixed some locks and added more checks.
Still there is a locking error,
not added by my patches, but present in master version
(locking of map/list of peers).
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
Some BlockchainDB unit testing fleshed out (and working), rudimentary
linker flag for lmdb in CMakeLists, but should probably be done
"correctly" at some point (find it on whatever system you're building on
and all that jazz).
update for rebase (warptangent 2015-01-04)
fix conflicts with upstream CMakeLists.txt files
tests/CMakeLists.txt (remove edits from original commit)
b94b8cd Added unit test. Fails for Japanese for some reason. (Oran Juice)
4c8a628 Remove iostream header put in during testing (Oran Juice)
9875f5b Variable unique prefix lengths for seed (Oran Juice)
Note: DNSResolver does not yet *use* DNSSEC, but rather this commit is
preparation for including DNSSEC validation. The function in
src/wallet/wallet2.cpp that uses DNSResolver still needs its parameters
updated accordingly.
