Previously, when outputs_amount == inputs_amount, the "m_overspend" property
was set, whereas "m_fee_too_low" would have been the correct property to set.
This is unlikely to ever occur and just something I've noticed while reading
through the code.
Scheme by luigi1111:
Multisig for RingCT on Monero
2 of 2
User A (coordinator):
Spendkey b,B
Viewkey a,A (shared)
User B:
Spendkey c,C
Viewkey a,A (shared)
Public Address: C+B, A
Both have their own watch only wallet via C+B, a
A will coordinate spending process (though B could easily as well, coordinator is more needed for more participants)
A and B watch for incoming outputs
B creates "half" key images for discovered output D:
I2_D = (Hs(aR)+c) * Hp(D)
B also creates 1.5 random keypairs (one scalar and 2 pubkeys; one on base G and one on base Hp(D)) for each output, storing the scalar(k) (linked to D),
and sending the pubkeys with I2_D.
A also creates "half" key images:
I1_D = (Hs(aR)+b) * Hp(D)
Then I_D = I1_D + I2_D
Having I_D allows A to check spent status of course, but more importantly allows A to actually build a transaction prefix (and thus transaction).
A builds the transaction until most of the way through MLSAG_Gen, adding the 2 pubkeys (per input) provided with I2_D
to his own generated ones where they are needed (secret row L, R).
At this point, A has a mostly completed transaction (but with an invalid/incomplete signature). A sends over the tx and includes r,
which allows B (with the recipient's address) to verify the destination and amount (by reconstructing the stealth address and decoding ecdhInfo).
B then finishes the signature by computing ss[secret_index][0] = ss[secret_index][0] + k - cc[secret_index]*c (secret indices need to be passed as well).
B can then broadcast the tx, or send it back to A for broadcasting. Once B has completed the signing (and verified the tx to be valid), he can add the full I_D
to his cache, allowing him to verify spent status as well.
NOTE:
A and B *must* present key A and B to each other with a valid signature proving they know a and b respectively.
Otherwise, trickery like the following becomes possible:
A creates viewkey a,A, spendkey b,B, and sends a,A,B to B.
B creates a fake key C = zG - B. B sends C back to A.
The combined spendkey C+B then equals zG, allowing B to spend funds at any time!
The signature fixes this, because B does not know a c corresponding to C (and thus can't produce a signature).
2 of 3
User A (coordinator)
Shared viewkey a,A
"spendkey" j,J
User B
"spendkey" k,K
User C
"spendkey" m,M
A collects K and M from B and C
B collects J and M from A and C
C collects J and K from A and B
A computes N = nG, n = Hs(jK)
A computes O = oG, o = Hs(jM)
B anc C compute P = pG, p = Hs(kM) || Hs(mK)
B and C can also compute N and O respectively if they wish to be able to coordinate
Address: N+O+P, A
The rest follows as above. The coordinator possesses 2 of 3 needed keys; he can get the other
needed part of the signature/key images from either of the other two.
Alternatively, if secure communication exists between parties:
A gives j to B
B gives k to C
C gives m to A
Address: J+K+M, A
3 of 3
Identical to 2 of 2, except the coordinator must collect the key images from both of the others.
The transaction must also be passed an additional hop: A -> B -> C (or A -> C -> B), who can then broadcast it
or send it back to A.
N-1 of N
Generally the same as 2 of 3, except participants need to be arranged in a ring to pass their keys around
(using either the secure or insecure method).
For example (ignoring viewkey so letters line up):
[4 of 5]
User: spendkey
A: a
B: b
C: c
D: d
E: e
a -> B, b -> C, c -> D, d -> E, e -> A
Order of signing does not matter, it just must reach n-1 users. A "remaining keys" list must be passed around with
the transaction so the signers know if they should use 1 or both keys.
Collecting key image parts becomes a little messy, but basically every wallet sends over both of their parts with a tag for each.
Thia way the coordinating wallet can keep track of which images have been added and which wallet they come from. Reasoning:
1. The key images must be added only once (coordinator will get key images for key a from both A and B, he must add only one to get the proper key actual key image)
2. The coordinator must keep track of which helper pubkeys came from which wallet (discussed in 2 of 2 section). The coordinator
must choose only one set to use, then include his choice in the "remaining keys" list so the other wallets know which of their keys to use.
You can generalize it further to N-2 of N or even M of N, but I'm not sure there's legitimate demand to justify the complexity. It might
also be straightforward enough to support with minimal changes from N-1 format.
You basically just give each user additional keys for each additional "-1" you desire. N-2 would be 3 keys per user, N-3 4 keys, etc.
The process is somewhat cumbersome:
To create a N/N multisig wallet:
- each participant creates a normal wallet
- each participant runs "prepare_multisig", and sends the resulting string to every other participant
- each participant runs "make_multisig N A B C D...", with N being the threshold and A B C D... being the strings received from other participants (the threshold must currently equal N)
As txes are received, participants' wallets will need to synchronize so that those new outputs may be spent:
- each participant runs "export_multisig FILENAME", and sends the FILENAME file to every other participant
- each participant runs "import_multisig A B C D...", with A B C D... being the filenames received from other participants
Then, a transaction may be initiated:
- one of the participants runs "transfer ADDRESS AMOUNT"
- this partly signed transaction will be written to the "multisig_monero_tx" file
- the initiator sends this file to another participant
- that other participant runs "sign_multisig multisig_monero_tx"
- the resulting transaction is written to the "multisig_monero_tx" file again
- if the threshold was not reached, the file must be sent to another participant, until enough have signed
- the last participant to sign runs "submit_multisig multisig_monero_tx" to relay the transaction to the Monero network
43f5269f Wallets now do not depend on the daemon rpc lib (moneromooo-monero)
bb89ae8b move connection_basic and network_throttle from src/p2p to epee (moneromooo-monero)
4abf25f3 cryptonote_core does not depend on p2p anymore (moneromooo-monero)
0d9c0db9 Do not build against epee_readline if it was not built (Howard Chu)
178014c9 split off readline code into epee_readline (moneromooo-monero)
a9e14a19 link against readline only for monerod and wallet-wallet-{rpc,cli} (moneromooo-monero)
437421ce wallet: move some scoped_message_writer calls from the libs (moneromooo-monero)
e89994e9 wallet: rejig to avoid prompting in wallet2 (moneromooo-monero)
ec5135e5 move input_line from command_line to simplewallet (moneromooo-monero)
082db75f move cryptonote command line options to cryptonote_core (moneromooo-monero)
ec48e8d8 core: do not forbid txes without destination (moneromooo-monero)
523084bc core: don't add empty additional pub keys field to extra (moneromooo-monero)
This patch allows to filter out sensitive information for queries that rely on the pool state, when running in restricted mode.
This filtering is only applied to data sent back to RPC queries. Results of inline commands typed locally in the daemon are not affected.
In practice, when running with `--restricted-rpc`:
* get_transaction_pool will list relayed transactions with the fields "last relayed time" and "received time" set to zero.
* get_transaction_pool will not list transaction that have do_not_relay set to true, and will not list key images that are used only for such transactions
* get_transaction_pool_hashes.bin will not list such transaction
* get_transaction_pool_stats will not count such transactions in any of the aggregated values that are computed
The implementation does not make filtering the default, so developers should be mindful of this if they add new RPC functionality.
Fixes#2590.
Transactions in the txpool are marked when another transaction
is seen double spending one or more of its inputs.
This is then exposed wherever appropriate.
Note that being marked with this "double spend seen" flag does
NOT mean this transaction IS a double spend and will never be
mined: it just means that the network has seen at least another
transaction spending at least one of the same inputs, so care
should be taken to wait for a few confirmations before acting
upon that transaction (ie, mostly of use for merchants wanting
to accept unconfirmed transactions).
It is safe in those cases, though might return slightly out of date
information if another thread is busy modifying the blockchain,
but it avoids potentially lengthy delays just to get things like
the current blockchain height.
22b51e06 db_lmdb: include chain height when failing to find an output key (moneromooo-monero)
5db433b3 blockchain: avoid exceptions in output verification (moneromooo-monero)
0aaaca29 tx_pool: set the "invalid input" bit when check_tx_inputs fails (moneromooo-monero)
9236823b simplewallet: print tx rejection reason where it was missing (moneromooo-monero)
3dee3301 core_rpc_server: print tx rejection reason at L0 too (moneromooo-monero)
6137a0b9 blockchain: reject unsorted ins and outs from v7 (moneromooo-monero)
16afab90 core: sort ins and outs key key image and public key, respectively (moneromooo-monero)
0c36b9f9 common: add apply_permutation file and function (moneromooo-monero)
It was always returning true, and could not be foreseen to
usefully return errors in the future. This silences CID 162652
as well as saves some checking code in a few places.
0299cb77 Fix various oversights/bugs in ZMQ RPC server code (Thomas Winget)
77986023 json serialization for rpc-relevant monero types (Thomas Winget)
5c1e08fe Refactor some things into more composable (smaller) functions (Thomas Winget)
9ac2ad07 DRY refactoring (Thomas Winget)
And optimize import startup:
Remember start_height position during initial count_blocks pass
to avoid having to reread entire file again to arrive at start_height
It is unused, as it was apparently a future optimization,
and it leaks some information (though since pools publish
thei blocks they find, that amount seems small).
Structured {de-,}serialization methods for (many new) types
which are used for requests or responses in the RPC.
New types include RPC requests and responses, and structs which compose
types within those.
# Conflicts:
# src/cryptonote_core/blockchain.cpp
This commit refactors some of the rpc-related functions in the
Blockchain class to be more composable. This change was made
in order to make implementing the new zmq rpc easier without
trampling on the old rpc.
New functions:
Blockchain::get_num_mature_outputs
Blockchain::get_random_outputs
Blockchain::get_output_key
Blockchain::get_output_key_mask_unlocked
Blockchain::find_blockchain_supplement (overload)
functions which previously had this functionality inline now call these
functions as necessary.
This might prevent some calls to terminate when the LockedTXN
dtor is called as part of stack unwinding caused by another
exception in the first place.
c867357a cryptonote_protocol: error handling on cleanup_handle_incoming_blocks (moneromooo-monero)
ce901fcb Fix blockchain_import wedge on exception in cleanup_handle_incoming_blocks (moneromooo-monero)
84fa015e core: guard against exceptions in handle_incoming_{block,tx} (moneromooo-monero)
5807529e blockchain: cap memory size of retrieved blocks (moneromooo-monero)
c1b10381 rpc: decrease memory usage a bit in getblocks.bin (moneromooo-monero)
3dd34a49 Cleanup test impact of moving blockchain_db_types() (Howard Chu)
80344740 More DB support cleanup (Howard Chu)
4c7f8ac0 DB cleanup (Howard Chu)
If monerod is started with default sync mode, set it to SAFE after
synchronization completes. Set it back to FAST if synchronization
restarts (e.g. because another peer has a longer blockchain).
If monerod is started with an explicit sync mode, none of this
automation takes effect.
5d4ef719 core: speed up output index unique set calculation (moneromooo-monero)
19d7f568 perf_timer: allow profiling more granular than millisecond (moneromooo-monero)
bda8c598 epee: add nanosecond timer and pause/restart profiling macros (moneromooo-monero)
Add get_fork_version and add_ideal_fork_version to core so
cryptonote_protocol does not have to need the Blockchain
class directly, as it's not in its dependencies, and add
those to the fake core classes in tests too.
We won't even talk to a peer which claims a wrong version
for its top block. This will avoid syncing to known bad
peers in the first place.
Also add IP fails when failing to verify a block.
