Commit Graph

33 Commits

Author SHA1 Message Date
moneromooo-monero
bf6d1474c0
new flush_txpool command, and associated RPC call
It can flush a particular tx, or the whole pool (the RPC command
can flush a list of transactions too)
2016-01-30 13:28:26 +00:00
Riccardo Spagni
de03926850
updated copyright year 2015-12-31 08:39:56 +02:00
moneromooo-monero
b0541a56eb
blockchain: remove obsolete containers 2015-12-26 18:01:24 +00:00
moneromooo-monero
f33a88cfc1
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 22:13:38 +00:00
moneromooo-monero
81cb0fcdcc
blockchain: fix bitflipping test with quantized block rewards
Block reward may now be less than the full amount allowed.
This was breaking the bitflipping test.
We now keep track of whether a block which was accepted by the core
has a lower than allowed block reward, and allow this in the test.
2015-12-25 22:07:58 +00:00
moneromooo-monero
8ea7af1ba3
Allow the wallet to access hard fork information
And make it change behavior slightly when close/after first hard fork
2015-12-19 14:52:30 +00:00
warptangent
725acc7f17
Replace tabs with two spaces for consistency with rest of codebase
Remove trailing whitespace in same files.
2015-12-15 06:22:06 -08:00
moneromooo-monero
10da0a0b7c
add a --fakechain argument for tests
The core tests use the blockchain, and reset it to be able
to add test data to it. This does not play nice with the
databases, since those will save that data without an explicit
save call.
We add a fakechain flag that the tests will set, which tells
the core and blockchain code to use a separate database, as
well as skip a few things like checkpoints and fixup, which
only make sense for real data.
2015-12-13 11:38:37 +00:00
Javier Smooth
baf101ef4a More changes for 2-min blocks
Use the correct block time for realtime fuzz on locktime
Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting)
Lock unit tests to original block time for now
2015-11-13 00:37:35 -08:00
moneromooo-monero
4f873bcbaa
Remove some old/obsolete/unused code
git history's here if needed to get any of this back
2015-10-27 10:01:20 +00:00
moneromooo-monero
5f397e4412
Add functions to iterate through blocks, txes, outputs, key images 2015-10-25 12:36:11 +00:00
moneromooo-monero
ac90d488e7
from hard fork 2, all outputs must be decomposed
The wallet decomposes fully as of now too.
2015-10-11 13:02:55 +01:00
moneromooo-monero
5b11a89a76
hardfork: most state now saved to the DB
There will be a delay on first load of an existing blockchain
as it gets reparsed for this state data.
2015-09-20 18:42:52 +01:00
moneromooo-monero
e546f3724a
Add an RPC call and daemon command to get info on hard fork voting 2015-09-19 16:47:48 +01:00
moneromooo-monero
a7177610b3
core: add consts where appropriate 2015-09-19 16:47:35 +01:00
moneromooo-monero
8ffc508cef
core: moan when we think an update is needed to get latest hard fork info 2015-09-13 18:09:57 +01:00
moneromooo-monero
f85498422d
blockchain: use the new hardfork class 2015-09-12 11:15:53 +01:00
moneromooo-monero
bed9a44e56
blockchain: add a couple missing includes 2015-09-12 11:14:34 +01:00
moneromooo-monero
35abef1b92
blockchain: remove dead code 2015-08-11 10:48:51 +01:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
94ea3e8ed2 Removed on_idle() calls to Blockchain::store_blockchain() for lmdb.
Added option to cache tx-input verification results.
2015-07-15 23:20:25 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
e5d2680094 ** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).

Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.

LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5

ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.

[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
   This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.

[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
	a. 0 = Compute long hash per block (may take a while depending on CPU)
	b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
	a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
	b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
	Fast    - Write meta-data but defer data flush.
	Fastest - Defer meta-data and data flush.
	Sync    - Flush data after nblocks_per_sync and wait.
	Async   - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
        Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
	Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
	For berkeley-db only. Auto remove logs if enabled.

**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
	At the moment, you need a full resync to use this optimized version.

[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.

Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block

**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop,   Dual-core / 4-threads U4200  (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).

lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k  (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-15 23:20:16 -07:00
Riccardo Spagni
e01d32e52d
cleaning up, removing redundant files, renaming, fixing incorrect licenses 2015-05-31 13:40:18 +02:00
Thomas Winget
7b14d4a17f
Steps toward multiple dbs available -- working
There will need to be some more refactoring for these changes to be
considered complete/correct, but for now it's working.

new daemon cli argument "--db-type", works for LMDB and BerkeleyDB.

A good deal of refactoring is also present in this commit, namely
Blockchain no longer instantiates BlockchainDB, but rather is passed a
pointer to an already-instantiated BlockchainDB on init().
2015-03-25 12:09:44 -04:00
warptangent
4bedd68d2c
Update Blockchain::get_db() to return reference instead of pointer
Where this method is used, a BlockchainDB object is always expected, so
a pointer is unnecessary and less safe.
2015-03-22 15:45:36 -07:00
warptangent
275cbd4348
Add support for database open with flags
Add support to:
  - BlockchainDB, BlockchainLMDB
  - blockchain_import utility to open LMDB database with one or more
    LMDB flags.

Sample use:
  $ blockchain_import --database lmdb#nosync
  $ blockchain_import --database lmdb#nosync,nometasync
2015-03-16 00:26:59 -07:00
warptangent
ca75b4789c
Blockchain: add get_db() accessor, needed for blockchain_import
This handling may be changed in the future.
2015-03-15 13:22:52 -07:00
Thomas Winget
5eab480cb1
Moved BlockchainDB into its own src/ subfolder
Ostensibly janitorial work, but should be more relevant later down the
line.  Things that depend on core cryptonote things (i.e.
    cryptonote_core) don't necessarily depend on BlockchainDB and thus
have no need to have BlockchainDB baked in with them.
2015-03-06 15:20:45 -05:00
warptangent
59305d3137
Blockchain: match original function declaration from blockchain_storage 2015-02-23 00:33:35 -08:00
moneromooo-monero
b7270ab60e blockchain: add consts where appropriate 2015-01-04 19:39:41 -08:00
Thomas Winget
26a7db38eb add new checkpointing behavior to Blockchain class 2015-01-04 19:31:20 -08:00
Thomas Winget
74a1a89e27
Integrate BlockchainDB into cryptonote_core
Probably needs more looking at -- lot of things were done...in a rushed
sort of way.  That said, it all builds and *should* be at least
testable.

update for rebase (warptangent 2015-01-04)
  fix conflicts with upstream CMakeLists.txt files

  src/CMakeLists.txt (remove edits from original commit)
  tests/CMakeLists.txt (remove edits from original commit)
  src/cryptonote_core/CMakeLists.txt (edit)
  - use blockchain db .cpp and .h files
  - add LMDB_LIBRARIES
2015-01-04 19:29:51 -08:00
Thomas Winget
07733f98c0 update new blockchain to build with new changes
Still need to add in the new checkpointing functionality, as well as
touch up a few things, but is okay for now.
2015-01-04 18:41:44 -08:00
Thomas Winget
aba548cbf7 import of BlockchainDB files
tried rebasing, tree-filter, and many other things.  at this point,
the history of these files previous to this can live on
in my bc2 branch, as I'm importing them as-is to here.
2015-01-04 18:41:43 -08:00