2022-03-01 12:16:17 +01:00
|
|
|
// Copyright (c) 2019-2022, The Monero Project
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
//
|
|
|
|
// All rights reserved.
|
|
|
|
//
|
|
|
|
// Redistribution and use in source and binary forms, with or without modification, are
|
|
|
|
// permitted provided that the following conditions are met:
|
|
|
|
//
|
|
|
|
// 1. Redistributions of source code must retain the above copyright notice, this list of
|
|
|
|
// conditions and the following disclaimer.
|
|
|
|
//
|
|
|
|
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
|
|
|
|
// of conditions and the following disclaimer in the documentation and/or other
|
|
|
|
// materials provided with the distribution.
|
|
|
|
//
|
|
|
|
// 3. Neither the name of the copyright holder nor the names of its contributors may be
|
|
|
|
// used to endorse or promote products derived from this software without specific
|
|
|
|
// prior written permission.
|
|
|
|
//
|
|
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
|
|
|
|
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
|
|
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
|
|
|
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
|
|
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
|
|
|
#define IN_UNIT_TESTS
|
|
|
|
|
|
|
|
#include "gtest/gtest.h"
|
|
|
|
#include "cryptonote_core/blockchain.h"
|
|
|
|
#include "cryptonote_core/tx_pool.h"
|
|
|
|
#include "cryptonote_core/cryptonote_core.h"
|
|
|
|
#include "blockchain_db/testdb.h"
|
|
|
|
|
|
|
|
#define TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW 5000
|
|
|
|
|
|
|
|
namespace
|
|
|
|
{
|
|
|
|
|
|
|
|
class TestDB: public cryptonote::BaseTestDB
|
|
|
|
{
|
|
|
|
private:
|
|
|
|
struct block_t
|
|
|
|
{
|
|
|
|
size_t weight;
|
|
|
|
uint64_t long_term_weight;
|
|
|
|
};
|
|
|
|
|
|
|
|
public:
|
|
|
|
TestDB() { m_open = true; }
|
|
|
|
|
|
|
|
virtual void add_block( const cryptonote::block& blk
|
|
|
|
, size_t block_weight
|
|
|
|
, uint64_t long_term_block_weight
|
|
|
|
, const cryptonote::difficulty_type& cumulative_difficulty
|
|
|
|
, const uint64_t& coins_generated
|
|
|
|
, uint64_t num_rct_outs
|
|
|
|
, const crypto::hash& blk_hash
|
|
|
|
) override {
|
|
|
|
blocks.push_back({block_weight, long_term_block_weight});
|
|
|
|
}
|
|
|
|
virtual uint64_t height() const override { return blocks.size(); }
|
|
|
|
virtual size_t get_block_weight(const uint64_t &h) const override { return blocks[h].weight; }
|
|
|
|
virtual uint64_t get_block_long_term_weight(const uint64_t &h) const override { return blocks[h].long_term_weight; }
|
2019-02-21 01:13:21 +01:00
|
|
|
virtual std::vector<uint64_t> get_block_weights(uint64_t start_height, size_t count) const override {
|
|
|
|
std::vector<uint64_t> ret;
|
|
|
|
ret.reserve(count);
|
|
|
|
while (count-- && start_height < blocks.size()) ret.push_back(blocks[start_height++].weight);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
virtual std::vector<uint64_t> get_long_term_block_weights(uint64_t start_height, size_t count) const override {
|
|
|
|
std::vector<uint64_t> ret;
|
|
|
|
ret.reserve(count);
|
|
|
|
while (count-- && start_height < blocks.size()) ret.push_back(blocks[start_height++].long_term_weight);
|
|
|
|
return ret;
|
|
|
|
}
|
2019-04-03 02:09:49 +02:00
|
|
|
virtual crypto::hash get_block_hash_from_height(const uint64_t &height) const override {
|
|
|
|
crypto::hash hash = crypto::null_hash;
|
|
|
|
*(uint64_t*)&hash = height;
|
|
|
|
return hash;
|
|
|
|
}
|
2018-11-20 21:19:39 +01:00
|
|
|
virtual crypto::hash top_block_hash(uint64_t *block_height = NULL) const override {
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
uint64_t h = height();
|
|
|
|
crypto::hash top = crypto::null_hash;
|
|
|
|
if (h)
|
|
|
|
*(uint64_t*)&top = h - 1;
|
2018-11-20 21:19:39 +01:00
|
|
|
if (block_height)
|
|
|
|
*block_height = h - 1;
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
return top;
|
|
|
|
}
|
|
|
|
virtual void pop_block(cryptonote::block &blk, std::vector<cryptonote::transaction> &txs) override { blocks.pop_back(); }
|
|
|
|
|
|
|
|
private:
|
|
|
|
std::vector<block_t> blocks;
|
|
|
|
};
|
|
|
|
|
|
|
|
static uint32_t lcg_seed = 0;
|
|
|
|
|
|
|
|
static uint32_t lcg()
|
|
|
|
{
|
|
|
|
lcg_seed = (lcg_seed * 0x100000001b3 + 0xcbf29ce484222325) & 0xffffffff;
|
|
|
|
return lcg_seed;
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2020-12-18 16:56:54 +01:00
|
|
|
struct BlockchainAndPool
|
|
|
|
{
|
|
|
|
cryptonote::tx_memory_pool txpool;
|
|
|
|
cryptonote::Blockchain bc;
|
|
|
|
BlockchainAndPool(): txpool(bc), bc(txpool) {}
|
|
|
|
};
|
|
|
|
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
#define PREFIX_WINDOW(hf_version,window) \
|
2020-12-18 16:56:54 +01:00
|
|
|
BlockchainAndPool bap; \
|
|
|
|
cryptonote::Blockchain *bc = &bap.bc; \
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
struct get_test_options { \
|
|
|
|
const std::pair<uint8_t, uint64_t> hard_forks[3]; \
|
|
|
|
const cryptonote::test_options test_options = { \
|
|
|
|
hard_forks, \
|
|
|
|
window, \
|
|
|
|
}; \
|
|
|
|
get_test_options(): hard_forks{std::make_pair(1, (uint64_t)0), std::make_pair((uint8_t)hf_version, (uint64_t)1), std::make_pair((uint8_t)0, (uint64_t)0)} {} \
|
|
|
|
} opts; \
|
2020-12-18 16:56:54 +01:00
|
|
|
bool r = bc->init(new TestDB(), cryptonote::FAKECHAIN, true, &opts.test_options, 0, NULL); \
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(r)
|
|
|
|
|
|
|
|
#define PREFIX(hf_version) PREFIX_WINDOW(hf_version, TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW)
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, empty_short)
|
|
|
|
{
|
|
|
|
PREFIX(9);
|
|
|
|
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
|
|
|
|
ASSERT_EQ(bc->get_current_cumulative_block_weight_median(), CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5);
|
|
|
|
ASSERT_EQ(bc->get_current_cumulative_block_weight_limit(), CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 * 2);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, identical_before_fork)
|
|
|
|
{
|
|
|
|
PREFIX(9);
|
|
|
|
|
|
|
|
for (uint64_t h = 1; h < 10 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW; ++h)
|
|
|
|
{
|
|
|
|
size_t w = h < CRYPTONOTE_REWARD_BLOCKS_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
for (uint64_t h = 0; h < 10 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW; ++h)
|
|
|
|
{
|
|
|
|
ASSERT_EQ(bc->get_db().get_block_long_term_weight(h), bc->get_db().get_block_weight(h));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, identical_after_fork_before_long_term_window)
|
|
|
|
{
|
|
|
|
PREFIX(10);
|
|
|
|
|
|
|
|
for (uint64_t h = 1; h <= TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW; ++h)
|
|
|
|
{
|
|
|
|
size_t w = h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
for (uint64_t h = 0; h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW; ++h)
|
|
|
|
{
|
|
|
|
ASSERT_EQ(bc->get_db().get_block_long_term_weight(h), bc->get_db().get_block_weight(h));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, ceiling_at_30000000)
|
|
|
|
{
|
|
|
|
PREFIX(10);
|
|
|
|
|
|
|
|
for (uint64_t h = 0; h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW + TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW / 2 - 1; ++h)
|
|
|
|
{
|
|
|
|
size_t w = h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
ASSERT_EQ(bc->get_current_cumulative_block_weight_median(), 15000000);
|
|
|
|
ASSERT_EQ(bc->get_current_cumulative_block_weight_limit(), 30000000);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, multi_pop)
|
|
|
|
{
|
|
|
|
PREFIX(10);
|
|
|
|
|
|
|
|
for (uint64_t h = 1; h <= TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW + 20; ++h)
|
|
|
|
{
|
|
|
|
size_t w = h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
|
|
|
|
const uint64_t effective_median = bc->get_current_cumulative_block_weight_median();
|
|
|
|
const uint64_t effective_limit = bc->get_current_cumulative_block_weight_limit();
|
|
|
|
|
2019-04-09 12:38:11 +02:00
|
|
|
const uint64_t num_pop = 4;
|
|
|
|
for (uint64_t h = 0; h < num_pop; ++h)
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
{
|
2019-04-09 12:38:11 +02:00
|
|
|
size_t w = bc->get_current_cumulative_block_weight_limit();
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
|
|
|
|
cryptonote::block b;
|
|
|
|
std::vector<cryptonote::transaction> txs;
|
2019-04-09 12:38:11 +02:00
|
|
|
for (uint64_t h = 0; h < num_pop; ++h)
|
|
|
|
bc->get_db().pop_block(b, txs);
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
|
|
|
|
ASSERT_EQ(effective_median, bc->get_current_cumulative_block_weight_median());
|
|
|
|
ASSERT_EQ(effective_limit, bc->get_current_cumulative_block_weight_limit());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, multiple_updates)
|
|
|
|
{
|
|
|
|
PREFIX(10);
|
|
|
|
|
|
|
|
for (uint64_t h = 1; h <= 3 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW; ++h)
|
|
|
|
{
|
|
|
|
size_t w = h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
const uint64_t effective_median = bc->get_current_cumulative_block_weight_median();
|
|
|
|
const uint64_t effective_limit = bc->get_current_cumulative_block_weight_limit();
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
ASSERT_EQ(effective_median, bc->get_current_cumulative_block_weight_median());
|
|
|
|
ASSERT_EQ(effective_limit, bc->get_current_cumulative_block_weight_limit());
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
ASSERT_EQ(effective_median, bc->get_current_cumulative_block_weight_median());
|
|
|
|
ASSERT_EQ(effective_limit, bc->get_current_cumulative_block_weight_limit());
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
ASSERT_EQ(effective_median, bc->get_current_cumulative_block_weight_median());
|
|
|
|
ASSERT_EQ(effective_limit, bc->get_current_cumulative_block_weight_limit());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, pop_invariant_max)
|
|
|
|
{
|
|
|
|
PREFIX(10);
|
|
|
|
|
|
|
|
for (uint64_t h = 1; h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW - 10; ++h)
|
|
|
|
{
|
|
|
|
size_t w = bc->get_db().height() < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
|
|
|
|
for (int n = 0; n < 1000; ++n)
|
|
|
|
{
|
|
|
|
// pop some blocks, then add some more
|
|
|
|
int remove = 1 + (n * 17) % 8;
|
|
|
|
int add = (n * 23) % 12;
|
|
|
|
|
|
|
|
// save long term block weights we're about to remove
|
|
|
|
uint64_t old_ltbw[16], h0 = bc->get_db().height() - remove - 1;
|
|
|
|
for (int i = -2; i < remove; ++i)
|
|
|
|
{
|
|
|
|
old_ltbw[i + 2] = bc->get_db().get_block_long_term_weight(h0 + i);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (int i = 0; i < remove; ++i)
|
|
|
|
{
|
|
|
|
cryptonote::block b;
|
|
|
|
std::vector<cryptonote::transaction> txs;
|
|
|
|
bc->get_db().pop_block(b, txs);
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
for (int i = 0; i < add; ++i)
|
|
|
|
{
|
|
|
|
size_t w = bc->get_db().height() < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, bc->get_db().height(), bc->get_db().height(), {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
|
|
|
|
// check the new values are the same as the old ones
|
|
|
|
for (int i = -2; i < std::min(add, remove); ++i)
|
|
|
|
{
|
|
|
|
ASSERT_EQ(bc->get_db().get_block_long_term_weight(h0 + i), old_ltbw[i + 2]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, pop_invariant_random)
|
|
|
|
{
|
|
|
|
PREFIX(10);
|
|
|
|
|
2019-04-09 12:38:11 +02:00
|
|
|
for (uint64_t h = 1; h < 2 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW - 10; ++h)
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
{
|
2019-04-09 12:38:11 +02:00
|
|
|
lcg_seed = bc->get_db().height();
|
|
|
|
uint32_t r = lcg();
|
|
|
|
size_t w = bc->get_db().height() < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : (r % bc->get_current_cumulative_block_weight_limit());
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
}
|
|
|
|
|
|
|
|
for (int n = 0; n < 1000; ++n)
|
|
|
|
{
|
|
|
|
// pop some blocks, then add some more
|
|
|
|
int remove = 1 + (n * 17) % 8;
|
|
|
|
int add = (n * 23) % 123;
|
|
|
|
|
|
|
|
// save long term block weights we're about to remove
|
|
|
|
uint64_t old_ltbw[16], h0 = bc->get_db().height() - remove - 1;
|
|
|
|
for (int i = -2; i < remove; ++i)
|
|
|
|
{
|
|
|
|
old_ltbw[i + 2] = bc->get_db().get_block_long_term_weight(h0 + i);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (int i = 0; i < remove; ++i)
|
|
|
|
{
|
|
|
|
cryptonote::block b;
|
|
|
|
std::vector<cryptonote::transaction> txs;
|
|
|
|
bc->get_db().pop_block(b, txs);
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
const uint64_t effective_median = bc->get_current_cumulative_block_weight_median();
|
|
|
|
const uint64_t effective_limit = bc->get_current_cumulative_block_weight_limit();
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
ASSERT_EQ(effective_median, bc->get_current_cumulative_block_weight_median());
|
|
|
|
ASSERT_EQ(effective_limit, bc->get_current_cumulative_block_weight_limit());
|
|
|
|
}
|
|
|
|
for (int i = 0; i < add; ++i)
|
|
|
|
{
|
|
|
|
lcg_seed = bc->get_db().height();
|
|
|
|
uint32_t r = lcg();
|
|
|
|
size_t w = bc->get_db().height() < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW ? CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 : (r % bc->get_current_cumulative_block_weight_limit());
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, bc->get_db().height(), bc->get_db().height(), {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
const uint64_t effective_median = bc->get_current_cumulative_block_weight_median();
|
|
|
|
const uint64_t effective_limit = bc->get_current_cumulative_block_weight_limit();
|
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit());
|
|
|
|
ASSERT_EQ(effective_median, bc->get_current_cumulative_block_weight_median());
|
|
|
|
ASSERT_EQ(effective_limit, bc->get_current_cumulative_block_weight_limit());
|
|
|
|
}
|
|
|
|
|
|
|
|
// check the new values are the same as the old ones
|
|
|
|
for (int i = -2; i < std::min(add, remove); ++i)
|
|
|
|
{
|
|
|
|
ASSERT_EQ(bc->get_db().get_block_long_term_weight(h0 + i), old_ltbw[i + 2]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST(long_term_block_weight, long_growth_spike_and_drop)
|
|
|
|
{
|
|
|
|
PREFIX(10);
|
|
|
|
|
|
|
|
uint64_t long_term_effective_median_block_weight;
|
|
|
|
|
|
|
|
// constant init
|
|
|
|
for (uint64_t h = 0; h < TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW; ++h)
|
|
|
|
{
|
|
|
|
size_t w = CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5;
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit(&long_term_effective_median_block_weight));
|
|
|
|
}
|
|
|
|
ASSERT_EQ(long_term_effective_median_block_weight, 300000);
|
|
|
|
|
|
|
|
// slow 10% yearly for a year (scaled down by 100000 / TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW) -> 8% change
|
|
|
|
for (uint64_t h = 0; h < 365 * 720 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW / 100000; ++h)
|
|
|
|
{
|
|
|
|
//size_t w = bc->get_current_cumulative_block_weight_median() * rate;
|
|
|
|
float t = h / float(365 * 720 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW / 100000);
|
|
|
|
size_t w = 300000 + t * 30000;
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit(&long_term_effective_median_block_weight));
|
|
|
|
}
|
|
|
|
ASSERT_GT(long_term_effective_median_block_weight, 300000 * 1.07);
|
|
|
|
ASSERT_LT(long_term_effective_median_block_weight, 300000 * 1.09);
|
|
|
|
|
|
|
|
// spike over three weeks - does not move much
|
|
|
|
for (uint64_t h = 0; h < 21 * 720 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW / 100000; ++h)
|
|
|
|
{
|
|
|
|
size_t w = bc->get_current_cumulative_block_weight_limit();
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit(&long_term_effective_median_block_weight));
|
|
|
|
}
|
|
|
|
ASSERT_GT(long_term_effective_median_block_weight, 300000 * 1.07);
|
|
|
|
ASSERT_LT(long_term_effective_median_block_weight, 300000 * 1.09);
|
|
|
|
|
|
|
|
// drop - does not move much
|
|
|
|
for (uint64_t h = 0; h < 21 * 720 * TEST_LONG_TERM_BLOCK_WEIGHT_WINDOW / 100000; ++h)
|
|
|
|
{
|
|
|
|
size_t w = bc->get_current_cumulative_block_weight_median() * .25;
|
|
|
|
uint64_t ltw = bc->get_next_long_term_block_weight(w);
|
2018-11-11 15:51:03 +01:00
|
|
|
bc->get_db().add_block(std::make_pair(cryptonote::block(), ""), w, ltw, h, h, {});
|
ArticMine's new block weight algorithm
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
2019-01-21 18:18:50 +01:00
|
|
|
ASSERT_TRUE(bc->update_next_cumulative_weight_limit(&long_term_effective_median_block_weight));
|
|
|
|
}
|
|
|
|
ASSERT_GT(long_term_effective_median_block_weight, 300000 * 1.07);
|
|
|
|
ASSERT_LT(long_term_effective_median_block_weight, 300000 * 1.09);
|
|
|
|
}
|