nihilist/tor
1
0
Fork 0
mirror of https://gitlab.torproject.org/tpo/core/tor.git synced 2024-11-24 04:13:28 +01:00
Code Issues Packages Projects Releases Wiki Activity
f4cf279eb5
tor/doc/tor.1.txt
Roger Dingledine 6f82ae44cb Merge branch 'maint-0.2.3'
2012-09-05 16:41:43 -04:00

1999 lines
99 KiB
Plaintext
Raw Blame History

// Copyright (c) The Tor Project, Inc.
// See LICENSE for licensing information
// This is an asciidoc file used to generate the manpage/html reference.
// Learn asciidoc on http://www.methods.co.nz/asciidoc/userguide.html
:man source: Tor
:man manual: Tor Manual
TOR(1)
======
NAME
----
tor - The second-generation onion router
SYNOPSIS
--------
**tor** [__OPTION__ __value__]...
DESCRIPTION
-----------
__tor__ is a connection-oriented anonymizing communication
service. Users choose a source-routed path through a set of nodes, and
negotiate a "virtual circuit" through the network, in which each node
knows its predecessor and successor, but no others. Traffic flowing down
the circuit is unwrapped by a symmetric key at each node, which reveals
the downstream node. +
Basically __tor__ provides a distributed network of servers ("onion routers").
Users bounce their TCP streams -- web traffic, ftp, ssh, etc -- around the
routers, and recipients, observers, and even the routers themselves have
difficulty tracking the source of the stream.
COMMAND-LINE OPTIONS
--------------------
**-h**, **-help**::
Display a short help message and exit.
**-f** __FILE__::
Specify a new configuration file to contain further Tor configuration
options. (Default: $HOME/.torrc, or @CONFDIR@/torrc if that file is not
found)
**--defaults-torrc** __FILE__::
Specify a file in which to find default values for Tor options. The
contents of this file are overridden by those in the regular
configuration file, and by those on the command line. (Default:
@CONFDIR@/torrc-defaults.)
**--hash-password**::
Generates a hashed password for control port access.
**--list-fingerprint**::
Generate your keys and output your nickname and fingerprint.
**--verify-config**::
Verify the configuration file is valid.
**--service install** [**--options** __command-line options__]::
Install an instance of Tor as a Windows service, with the provided
command-line options. Current instructions can be found at
https://trac.torproject.org/projects/tor/wiki/doc/TorFAQ#HowdoIrunmyTorrelayasanNTservice
**--service** **remove**|**start**|**stop**::
Remove, start, or stop a configured Tor Windows service.
**--nt-service**::
Used internally to implement a Windows service.
**--list-torrc-options**::
List all valid options.
**--version**::
Display Tor version and exit.
**--quiet**|**--hush**::
Override the default console log. By default, Tor starts out logging
messages at level "notice" and higher to the console. It stops doing so
after it parses its configuration, if the configuration tells it to log
anywhere else. You can override this behavior with the **--hush** option,
which tells Tor to only send warnings and errors to the console, or with
the **--quiet** option, which tells Tor not to log to the console at all.
Other options can be specified on the command-line in the format "--option
value", in the format "option value", or in a configuration file. For
instance, you can tell Tor to start listening for SOCKS connections on port
9999 by passing --SOCKSPort 9999 or SOCKPort 9999 to it on the command line,
or by putting "SOCKSPort 9999" in the configuration file. You will need to
quote options with spaces in them: if you want Tor to log all debugging
messages to debug.log, you will probably need to say --Log 'debug file
debug.log'.
Options on the command line override those in configuration files. See the
next section for more information.
THE CONFIGURATION FILE FORMAT
-----------------------------
All configuration options in a configuration are written on a single line by
default. They take the form of an option name and a value, or an option name
and a quoted value (option value or option "value"). Anything after a #
character is treated as a comment. Options are
case-insensitive. C-style escaped characters are allowed inside quoted
values. To split one configuration entry into multiple lines, use a single
backslash character (\) before the end of the line. Comments can be used in
such multiline entries, but they must start at the beginning of a line.
By default, an option on the command line overrides an option found in the
configuration file, and an option in a configuration file overrides one in
the defaults file.
This rule is simple for options that take a single value, but it can become
complicated for options that are allowed to occur more than once: if you
specify four SOCKSPorts in your configuration file, and one more SOCKSPort on
the command line, the option on the command line will replace __all__ of the
SOCKSPorts in the configuration file. If this isn't what you want, prefix
the option name with a plus sign, and it will be appended to the previous set
of options instead.
Alternatively, you might want to remove every instance of an option in the
configuration file, and not replace it at all: you might want to say on the
command line that you want no SOCKSPorts at all. To do that, prefix the
option name with a forward slash.
GENERAL OPTIONS
---------------
**BandwidthRate** __N__ **bytes**|**KB**|**MB**|**GB**::
A token bucket limits the average incoming bandwidth usage on this node to
the specified number of bytes per second, and the average outgoing
bandwidth usage to that same value. If you want to run a relay in the
public network, this needs to be _at the very least_ 30 KB (that is,
30720 bytes). (Default: 5 MB)
**BandwidthBurst** __N__ **bytes**|**KB**|**MB**|**GB**::
Limit the maximum token bucket size (also known as the burst) to the given
number of bytes in each direction. (Default: 10 MB)
**MaxAdvertisedBandwidth** __N__ **bytes**|**KB**|**MB**|**GB**::
If set, we will not advertise more than this amount of bandwidth for our
BandwidthRate. Server operators who want to reduce the number of clients
who ask to build circuits through them (since this is proportional to
advertised bandwidth rate) can thus reduce the CPU demands on their server
without impacting network performance.
**RelayBandwidthRate** __N__ **bytes**|**KB**|**MB**|**GB**::
If not 0, a separate token bucket limits the average incoming bandwidth
usage for \_relayed traffic_ on this node to the specified number of bytes
per second, and the average outgoing bandwidth usage to that same value.
Relayed traffic currently is calculated to include answers to directory
requests, but that may change in future versions. (Default: 0)
**RelayBandwidthBurst** __N__ **bytes**|**KB**|**MB**|**GB**::
If not 0, limit the maximum token bucket size (also known as the burst) for
\_relayed traffic_ to the given number of bytes in each direction.
(Default: 0)
**PerConnBWRate** __N__ **bytes**|**KB**|**MB**|**GB**::
If set, do separate rate limiting for each connection from a non-relay.
You should never need to change this value, since a network-wide value is
published in the consensus and your relay will use that value. (Default: 0)
**PerConnBWBurst** __N__ **bytes**|**KB**|**MB**|**GB**::
If set, do separate rate limiting for each connection from a non-relay.
You should never need to change this value, since a network-wide value is
published in the consensus and your relay will use that value. (Default: 0)
**ClientTransportPlugin** __transport__ socks4|socks5 __IP__:__PORT__::
**ClientTransportPlugin** __transport__ exec __path-to-binary__ [options]::
In its first form, when set along with a corresponding Bridge line, the Tor
client forwards its traffic to a SOCKS-speaking proxy on "IP:PORT". It's the
duty of that proxy to properly forward the traffic to the bridge. +
+
In its second form, when set along with a corresponding Bridge line, the Tor
client launches the pluggable transport proxy executable in
__path-to-binary__ using __options__ as its command-line options, and
forwards its traffic to it. It's the duty of that proxy to properly forward
the traffic to the bridge.
**ServerTransportPlugin** __transport__ exec __path-to-binary__ [options]::
The Tor relay launches the pluggable transport proxy in __path-to-binary__
using __options__ as its command-line options, and expects to receive
proxied client traffic from it.
**ConnLimit** __NUM__::
The minimum number of file descriptors that must be available to the Tor
process before it will start. Tor will ask the OS for as many file
descriptors as the OS will allow (you can find this by "ulimit -H -n").
If this number is less than ConnLimit, then Tor will refuse to start. +
+
You probably don't need to adjust this. It has no effect on Windows
since that platform lacks getrlimit(). (Default: 1000)
**DisableNetwork** **0**|**1**::
When this option is set, we don't listen for or accept any connections
other than controller connections, and we don't make any outbound
connections. Controllers sometimes use this option to avoid using
the network until Tor is fully configured. (Default: 0)
**ConstrainedSockets** **0**|**1**::
If set, Tor will tell the kernel to attempt to shrink the buffers for all
sockets to the size specified in **ConstrainedSockSize**. This is useful for
virtual servers and other environments where system level TCP buffers may
be limited. If you're on a virtual server, and you encounter the "Error
creating network socket: No buffer space available" message, you are
likely experiencing this problem. +
+
The preferred solution is to have the admin increase the buffer pool for
the host itself via /proc/sys/net/ipv4/tcp_mem or equivalent facility;
this configuration option is a second-resort. +
+
The DirPort option should also not be used if TCP buffers are scarce. The
cached directory requests consume additional sockets which exacerbates
the problem. +
+
You should **not** enable this feature unless you encounter the "no buffer
space available" issue. Reducing the TCP buffers affects window size for
the TCP stream and will reduce throughput in proportion to round trip
time on long paths. (Default: 0)
**ConstrainedSockSize** __N__ **bytes**|**KB**::
When **ConstrainedSockets** is enabled the receive and transmit buffers for
all sockets will be set to this limit. Must be a value between 2048 and
262144, in 1024 byte increments. Default of 8192 is recommended.
**ControlPort** __PORT__|**auto**::
If set, Tor will accept connections on this port and allow those
connections to control the Tor process using the Tor Control Protocol
(described in control-spec.txt). Note: unless you also specify one or
more of **HashedControlPassword** or **CookieAuthentication**,
setting this option will cause Tor to allow any process on the local
host to control it. (Setting both authentication methods means either
method is sufficient to authenticate to Tor.) This
option is required for many Tor controllers; most use the value of 9051.
Set it to "auto" to have Tor pick a port for you. (Default: 0)
**ControlListenAddress** __IP__[:__PORT__]::
Bind the controller listener to this address. If you specify a port, bind
to this port rather than the one specified in ControlPort. We strongly
recommend that you leave this alone unless you know what you're doing,
since giving attackers access to your control listener is really
dangerous. This directive can be specified multiple
times to bind to multiple addresses/ports. (Default: 127.0.0.1)
**ControlSocket** __Path__::
Like ControlPort, but listens on a Unix domain socket, rather than a TCP
socket. (Unix and Unix-like systems only.)
**ControlSocketsGroupWritable** **0**|**1**::
If this option is set to 0, don't allow the filesystem group to read and
write unix sockets (e.g. ControlSocket). If the option is set to 1, make
the control socket readable and writable by the default GID. (Default: 0)
**HashedControlPassword** __hashed_password__::
Allow connections on the control port if they present
the password whose one-way hash is __hashed_password__. You
can compute the hash of a password by running "tor --hash-password
__password__". You can provide several acceptable passwords by using more
than one HashedControlPassword line.
**CookieAuthentication** **0**|**1**::
If this option is set to 1, allow connections on the control port
when the connecting process knows the contents of a file named
"control_auth_cookie", which Tor will create in its data directory. This
authentication method should only be used on systems with good filesystem
security. (Default: 0)
**CookieAuthFile** __Path__::
If set, this option overrides the default location and file name
for Tor's cookie file. (See CookieAuthentication above.)
**CookieAuthFileGroupReadable** **0**|**1**|__Groupname__::
If this option is set to 0, don't allow the filesystem group to read the
cookie file. If the option is set to 1, make the cookie file readable by
the default GID. [Making the file readable by other groups is not yet
implemented; let us know if you need this for some reason.] (Default: 0)
**ControlPortWriteToFile** __Path__::
If set, Tor writes the address and port of any control port it opens to
this address. Usable by controllers to learn the actual control port
when ControlPort is set to "auto".
**ControlPortFileGroupReadable** **0**|**1**::
If this option is set to 0, don't allow the filesystem group to read the
control port file. If the option is set to 1, make the control port
file readable by the default GID. (Default: 0)
**DataDirectory** __DIR__::
Store working data in DIR (Default: @LOCALSTATEDIR@/lib/tor)
**DirServer** [__nickname__] [**flags**] __address__:__port__ __fingerprint__::
Use a nonstandard authoritative directory server at the provided address
and port, with the specified key fingerprint. This option can be repeated
many times, for multiple authoritative directory servers. Flags are
separated by spaces, and determine what kind of an authority this directory
is. By default, every authority is authoritative for current ("v2")-style
directories, unless the "no-v2" flag is given. If the "v1" flags is
provided, Tor will use this server as an authority for old-style (v1)
directories as well. (Only directory mirrors care about this.) Tor will
use this server as an authority for hidden service information if the "hs"
flag is set, or if the "v1" flag is set and the "no-hs" flag is **not** set.
Tor will use this authority as a bridge authoritative directory if the
"bridge" flag is set. If a flag "orport=**port**" is given, Tor will use the
given port when opening encrypted tunnels to the dirserver. Lastly, if a
flag "v3ident=**fp**" is given, the dirserver is a v3 directory authority
whose v3 long-term signing key has the fingerprint **fp**. +
+
If no **dirserver** line is given, Tor will use the default directory
servers. NOTE: this option is intended for setting up a private Tor
network with its own directory authorities. If you use it, you will be
distinguishable from other users, because you won't believe the same
authorities they do.
**DynamicDHGroups** **0**|**1**::
If this option is set to 1, when running as a server, generate our
own Diffie-Hellman group instead of using the one from Apache's mod_ssl.
This option may help circumvent censorship based on static
Diffie-Hellman parameters. (Default: 0)
**AlternateDirAuthority** [__nickname__] [**flags**] __address__:__port__ __fingerprint__ +
**AlternateHSAuthority** [__nickname__] [**flags**] __address__:__port__ __fingerprint__ +
**AlternateBridgeAuthority** [__nickname__] [**flags**] __address__:__port__ __ fingerprint__::
These options behave as DirServer, but they replace fewer of the
default directory authorities. Using
AlternateDirAuthority replaces the default Tor directory authorities, but
leaves the default hidden service authorities and bridge authorities in
place. Similarly, AlternateHSAuthority replaces the default hidden
service authorities, but not the directory or bridge authorities; and
AlternateBridgeAuthority replaces the default bridge authority,
but leaves the directory and hidden service authorities alone.
**DisableAllSwap** **0**|**1**::
If set to 1, Tor will attempt to lock all current and future memory pages,
so that memory cannot be paged out. Windows, OS X and Solaris are currently
not supported. We believe that this feature works on modern Gnu/Linux
distributions, and that it should work on *BSD systems (untested). This
option requires that you start your Tor as root, and you should use the
**User** option to properly reduce Tor's privileges. (Default: 0)
**DisableDebuggerAttachment** **0**|**1**::
If set to 1, Tor will attempt to prevent basic debugging attachment attempts
by other processes. It has no impact for users who wish to attach if they
have CAP_SYS_PTRACE or if they are root. We believe that this feature
works on modern Gnu/Linux distributions, and that it may also work on *BSD
systems (untested). Some modern Gnu/Linux systems such as Ubuntu have the
kernel.yama.ptrace_scope sysctl and by default enable it as an attempt to
limit the PTRACE scope for all user processes by default. This feature will
attempt to limit the PTRACE scope for Tor specifically - it will not attempt
to alter the system wide ptrace scope as it may not even exist. If you wish
to attach to Tor with a debugger such as gdb or strace you will want to set
this to 0 for the duration of your debugging. Normal users should leave it
on. Disabling this option while Tor is running is prohibited. (Default: 1)
**FetchDirInfoEarly** **0**|**1**::
If set to 1, Tor will always fetch directory information like other
directory caches, even if you don't meet the normal criteria for fetching
early. Normal users should leave it off. (Default: 0)
**FetchDirInfoExtraEarly** **0**|**1**::
If set to 1, Tor will fetch directory information before other directory
caches. It will attempt to download directory information closer to the
start of the consensus period. Normal users should leave it off.
(Default: 0)
**FetchHidServDescriptors** **0**|**1**::
If set to 0, Tor will never fetch any hidden service descriptors from the
rendezvous directories. This option is only useful if you're using a Tor
controller that handles hidden service fetches for you. (Default: 1)
**FetchServerDescriptors** **0**|**1**::
If set to 0, Tor will never fetch any network status summaries or server
descriptors from the directory servers. This option is only useful if
you're using a Tor controller that handles directory fetches for you.
(Default: 1)
**FetchUselessDescriptors** **0**|**1**::
If set to 1, Tor will fetch every non-obsolete descriptor from the
authorities that it hears about. Otherwise, it will avoid fetching useless
descriptors, for example for routers that are not running. This option is
useful if you're using the contributed "exitlist" script to enumerate Tor
nodes that exit to certain addresses. (Default: 0)
**HTTPProxy** __host__[:__port__]::
Tor will make all its directory requests through this host:port (or host:80
if port is not specified), rather than connecting directly to any directory
servers.
**HTTPProxyAuthenticator** __username:password__::
If defined, Tor will use this username:password for Basic HTTP proxy
authentication, as in RFC 2617. This is currently the only form of HTTP
proxy authentication that Tor supports; feel free to submit a patch if you
want it to support others.
**HTTPSProxy** __host__[:__port__]::
Tor will make all its OR (SSL) connections through this host:port (or
host:443 if port is not specified), via HTTP CONNECT rather than connecting
directly to servers. You may want to set **FascistFirewall** to restrict
the set of ports you might try to connect to, if your HTTPS proxy only
allows connecting to certain ports.
**HTTPSProxyAuthenticator** __username:password__::
If defined, Tor will use this username:password for Basic HTTPS proxy
authentication, as in RFC 2617. This is currently the only form of HTTPS
proxy authentication that Tor supports; feel free to submit a patch if you
want it to support others.
**Socks4Proxy** __host__[:__port__]::
Tor will make all OR connections through the SOCKS 4 proxy at host:port
(or host:1080 if port is not specified).
**Socks5Proxy** __host__[:__port__]::
Tor will make all OR connections through the SOCKS 5 proxy at host:port
(or host:1080 if port is not specified).
**Socks5ProxyUsername** __username__ +
**Socks5ProxyPassword** __password__::
If defined, authenticate to the SOCKS 5 server using username and password
in accordance to RFC 1929. Both username and password must be between 1 and
255 characters.
**KeepalivePeriod** __NUM__::
To keep firewalls from expiring connections, send a padding keepalive cell
every NUM seconds on open connections that are in use. If the connection
has no open circuits, it will instead be closed after NUM seconds of
idleness. (Default: 5 minutes)
**Log** __minSeverity__[-__maxSeverity__] **stderr**|**stdout**|**syslog**::
Send all messages between __minSeverity__ and __maxSeverity__ to the standard
output stream, the standard error stream, or to the system log. (The
"syslog" value is only supported on Unix.) Recognized severity levels are
debug, info, notice, warn, and err. We advise using "notice" in most cases,
since anything more verbose may provide sensitive information to an
attacker who obtains the logs. If only one severity level is given, all
messages of that level or higher will be sent to the listed destination.
**Log** __minSeverity__[-__maxSeverity__] **file** __FILENAME__::
As above, but send log messages to the listed filename. The
"Log" option may appear more than once in a configuration file.
Messages are sent to all the logs that match their severity
level.
**Log** **[**__domain__,...**]**__minSeverity__[-__maxSeverity__] ... **file** __FILENAME__ +
**Log** **[**__domain__,...**]**__minSeverity__[-__maxSeverity__] ... **stderr**|**stdout**|**syslog**::
As above, but select messages by range of log severity __and__ by a
set of "logging domains". Each logging domain corresponds to an area of
functionality inside Tor. You can specify any number of severity ranges
for a single log statement, each of them prefixed by a comma-separated
list of logging domains. You can prefix a domain with $$~$$ to indicate
negation, and use * to indicate "all domains". If you specify a severity
range without a list of domains, it matches all domains. +
+
This is an advanced feature which is most useful for debugging one or two
of Tor's subsystems at a time. +
+
The currently recognized domains are: general, crypto, net, config, fs,
protocol, mm, http, app, control, circ, rend, bug, dir, dirserv, or, edge,
acct, hist, and handshake. Domain names are case-insensitive. +
+
For example, "`Log [handshake]debug [~net,~mm]info notice stdout`" sends
to stdout: all handshake messages of any severity, all info-and-higher
messages from domains other than networking and memory management, and all
messages of severity notice or higher.
**LogMessageDomains** **0**|**1**::
If 1, Tor includes message domains with each log message. Every log
message currently has at least one domain; most currently have exactly
one. This doesn't affect controller log messages. (Default: 0)
**OutboundBindAddress** __IP__::
Make all outbound connections originate from the IP address specified. This
is only useful when you have multiple network interfaces, and you want all
of Tor's outgoing connections to use a single one. This setting will be
ignored for connections to the loopback addresses (127.0.0.0/8 and ::1).
**PidFile** __FILE__::
On startup, write our PID to FILE. On clean shutdown, remove
FILE.
**ProtocolWarnings** **0**|**1**::
If 1, Tor will log with severity \'warn' various cases of other parties not
following the Tor specification. Otherwise, they are logged with severity
\'info'. (Default: 0)
**RunAsDaemon** **0**|**1**::
If 1, Tor forks and daemonizes to the background. This option has no effect
on Windows; instead you should use the --service command-line option.
(Default: 0)
**LogTimeGranularity** __NUM__::
Set the resolution of timestamps in Tor's logs to NUM milliseconds.
NUM must be positive and either a divisor or a multiple of 1 second.
Note that this option only controls the granularity written by Tor to
a file or console log. Tor does not (for example) "batch up" log
messages to affect times logged by a controller, times attached to
syslog messages, or the mtime fields on log files. (Default: 1 second)
**SafeLogging** **0**|**1**|**relay**::
Tor can scrub potentially sensitive strings from log messages (e.g.
addresses) by replacing them with the string [scrubbed]. This way logs can
still be useful, but they don't leave behind personally identifying
information about what sites a user might have visited. +
+
If this option is set to 0, Tor will not perform any scrubbing, if it is
set to 1, all potentially sensitive strings are replaced. If it is set to
relay, all log messages generated when acting as a relay are sanitized, but
all messages generated when acting as a client are not. (Default: 1)
**User** __UID__::
On startup, setuid to this user and setgid to their primary group.
**HardwareAccel** **0**|**1**::
If non-zero, try to use built-in (static) crypto hardware acceleration when
available. (Default: 0)
**AccelName** __NAME__::
When using OpenSSL hardware crypto acceleration attempt to load the dynamic
engine of this name. This must be used for any dynamic hardware engine.
Names can be verified with the openssl engine command.
**AccelDir** __DIR__::
Specify this option if using dynamic hardware acceleration and the engine
implementation library resides somewhere other than the OpenSSL default.
**AvoidDiskWrites** **0**|**1**::
If non-zero, try to write to disk less frequently than we would otherwise.
This is useful when running on flash memory or other media that support
only a limited number of writes. (Default: 0)
**TunnelDirConns** **0**|**1**::
If non-zero, when a directory server we contact supports it, we will build
a one-hop circuit and make an encrypted connection via its ORPort.
(Default: 1)
**PreferTunneledDirConns** **0**|**1**::
If non-zero, we will avoid directory servers that don't support tunneled
directory connections, when possible. (Default: 1)
**CircuitPriorityHalflife** __NUM1__::
If this value is set, we override the default algorithm for choosing which
circuit's cell to deliver or relay next. When the value is 0, we
round-robin between the active circuits on a connection, delivering one
cell from each in turn. When the value is positive, we prefer delivering
cells from whichever connection has the lowest weighted cell count, where
cells are weighted exponentially according to the supplied
CircuitPriorityHalflife value (in seconds). If this option is not set at
all, we use the behavior recommended in the current consensus
networkstatus. This is an advanced option; you generally shouldn't have
to mess with it. (Default: not set)
**DisableIOCP** **0**|**1**::
If Tor was built to use the Libevent's "bufferevents" networking code
and you're running on Windows, setting this option to 1 will tell Libevent
not to use the Windows IOCP networking API. (Default: 1)
**UserspaceIOCPBuffers** **0**|**1**::
If IOCP is enabled (see DisableIOCP above), setting this option to 1
will tell Tor to disable kernel-space TCP buffers, in order to avoid
needless copy operations and try not to run out of non-paged RAM.
This feature is experimental; don't use it yet unless you're eager to
help tracking down bugs. (Default: 0)
**_UseFilteringSSLBufferevents** **0**|**1**::
Tells Tor to do its SSL communication using a chain of
bufferevents: one for SSL and one for networking. This option has no
effect if bufferevents are disabled (in which case it can't turn on), or
if IOCP bufferevents are enabled (in which case it can't turn off). This
option is useful for debugging only; most users shouldn't touch it.
(Default: 0)
**CountPrivateBandwidth** **0**|**1**::
If this option is set, then Tor's rate-limiting applies not only to
remote connections, but also to connections to private addresses like
127.0.0.1 or 10.0.0.1. This is mostly useful for debugging
rate-limiting. (Default: 0)
CLIENT OPTIONS
--------------
The following options are useful only for clients (that is, if
**SocksPort**, **TransPort**, **DNSPort**, or **NATDPort** is non-zero):
**AllowInvalidNodes** **entry**|**exit**|**middle**|**introduction**|**rendezvous**|**...**::
If some Tor servers are obviously not working right, the directory
authorities can manually mark them as invalid, meaning that it's not
recommended you use them for entry or exit positions in your circuits. You
can opt to use them in some circuit positions, though. The default is
"middle,rendezvous", and other choices are not advised.
**ExcludeSingleHopRelays** **0**|**1**::
This option controls whether circuits built by Tor will include relays with
the AllowSingleHopExits flag set to true. If ExcludeSingleHopRelays is set
to 0, these relays will be included. Note that these relays might be at
higher risk of being seized or observed, so they are not normally
included. Also note that relatively few clients turn off this option,
so using these relays might make your client stand out.
(Default: 1)
**Bridge** [__transport__] __IP__:__ORPort__ [__fingerprint__]::
When set along with UseBridges, instructs Tor to use the relay at
"IP:ORPort" as a "bridge" relaying into the Tor network. If "fingerprint"
is provided (using the same format as for DirServer), we will verify that
the relay running at that location has the right fingerprint. We also use
fingerprint to look up the bridge descriptor at the bridge authority, if
it's provided and if UpdateBridgesFromAuthority is set too. +
+
If "transport" is provided, and matches to a ClientTransportPlugin
line, we use that pluggable transports proxy to transfer data to
the bridge.
**LearnCircuitBuildTimeout** **0**|**1**::
If 0, CircuitBuildTimeout adaptive learning is disabled. (Default: 1)
**CircuitBuildTimeout** __NUM__::
Try for at most NUM seconds when building circuits. If the circuit isn't
open in that time, give up on it. If LearnCircuitBuildTimeout is 1, this
value serves as the initial value to use before a timeout is learned. If
LearnCircuitBuildTimeout is 0, this value is the only value used.
(Default: 60 seconds)
**CircuitIdleTimeout** __NUM__::
If we have kept a clean (never used) circuit around for NUM seconds, then
close it. This way when the Tor client is entirely idle, it can expire all
of its circuits, and then expire its TLS connections. Also, if we end up
making a circuit that is not useful for exiting any of the requests we're
receiving, it won't forever take up a slot in the circuit list. (Default: 1
hour)
**CircuitStreamTimeout** __NUM__::
If non-zero, this option overrides our internal timeout schedule for how
many seconds until we detach a stream from a circuit and try a new circuit.
If your network is particularly slow, you might want to set this to a
number like 60. (Default: 0)
**ClientOnly** **0**|**1**::
If set to 1, Tor will under no circumstances run as a relay or serve
directory requests. This config option is mostly meaningless: we
added it back when we were considering having Tor clients auto-promote
themselves to being relays if they were stable and fast enough. The
current behavior is simply that Tor is a client unless ORPort or
DirPort are configured. (Default: 0)
**ExcludeNodes** __node__,__node__,__...__::
A list of identity fingerprints, nicknames, country codes and address
patterns of nodes to avoid when building a circuit.
(Example:
ExcludeNodes SlowServer, ABCD1234CDEF5678ABCD1234CDEF5678ABCD1234, \{cc}, 255.254.0.0/8) +
+
By default, this option is treated as a preference that Tor is allowed
to override in order to keep working.
For example, if you try to connect to a hidden service,
but you have excluded all of the hidden service's introduction points,
Tor will connect to one of them anyway. If you do not want this
behavior, set the StrictNodes option (documented below). +
+
Note also that if you are a relay, this (and the other node selection
options below) only affects your own circuits that Tor builds for you.
Clients can still build circuits through you to any node. Controllers
can tell Tor to build circuits through any node.
**ExcludeExitNodes** __node__,__node__,__...__::
A list of identity fingerprints, nicknames, country codes and address
patterns of nodes to never use when picking an exit node---that is, a
node that delivers traffic for you outside the Tor network. Note that any
node listed in ExcludeNodes is automatically considered to be part of this
list too. See also the caveats on the "ExitNodes" option below.
**ExitNodes** __node__,__node__,__...__::
A list of identity fingerprints, nicknames, country codes and address
patterns of nodes to use as exit node---that is, a
node that delivers traffic for you outside the Tor network. +
+
Note that if you list too few nodes here, or if you exclude too many exit
nodes with ExcludeExitNodes, you can degrade functionality. For example,
if none of the exits you list allows traffic on port 80 or 443, you won't
be able to browse the web. +
+
Note also that not every circuit is used to deliver traffic outside of
the Tor network. It is normal to see non-exit circuits (such as those
used to connect to hidden services, those that do directory fetches,
those used for relay reachability self-tests, and so on) that end
at a non-exit node. To
keep a node from being used entirely, see ExcludeNodes and StrictNodes. +
+
The ExcludeNodes option overrides this option: any node listed in both
ExitNodes and ExcludeNodes is treated as excluded. +
+
The .exit address notation, if enabled via AllowDotExit, overrides
this option.
**EntryNodes** __node__,__node__,__...__::
A list of identity fingerprints, nicknames, and country codes of nodes
to use for the first hop in your normal circuits.
Normal circuits include all
circuits except for direct connections to directory servers. The Bridge
option overrides this option; if you have configured bridges and
UseBridges is 1, the Bridges are used as your entry nodes. +
+
The ExcludeNodes option overrides this option: any node listed in both
EntryNodes and ExcludeNodes is treated as excluded.
**StrictNodes** **0**|**1**::
If StrictNodes is set to 1, Tor will treat the ExcludeNodes option as a
requirement to follow for all the circuits you generate, even if doing so
will break functionality for you. If StrictNodes is set to 0, Tor will
still try to avoid nodes in the ExcludeNodes list, but it will err on the
side of avoiding unexpected errors. Specifically, StrictNodes 0 tells
Tor that it is okay to use an excluded node when it is *necessary* to
perform relay reachability self-tests, connect to
a hidden service, provide a hidden service to a client, fulfill a .exit
request, upload directory information, or download directory information.
(Default: 0)
**FascistFirewall** **0**|**1**::
If 1, Tor will only create outgoing connections to ORs running on ports
that your firewall allows (defaults to 80 and 443; see **FirewallPorts**).
This will allow you to run Tor as a client behind a firewall with
restrictive policies, but will not allow you to run as a server behind such
a firewall. If you prefer more fine-grained control, use
ReachableAddresses instead.
**FirewallPorts** __PORTS__::
A list of ports that your firewall allows you to connect to. Only used when
**FascistFirewall** is set. This option is deprecated; use ReachableAddresses
instead. (Default: 80, 443)
**ReachableAddresses** __ADDR__[/__MASK__][:__PORT__]...::
A comma-separated list of IP addresses and ports that your firewall allows
you to connect to. The format is as for the addresses in ExitPolicy, except
that "accept" is understood unless "reject" is explicitly provided. For
example, \'ReachableAddresses 99.0.0.0/8, reject 18.0.0.0/8:80, accept
\*:80' means that your firewall allows connections to everything inside net
99, rejects port 80 connections to net 18, and accepts connections to port
80 otherwise. (Default: \'accept \*:*'.)
**ReachableDirAddresses** __ADDR__[/__MASK__][:__PORT__]...::
Like **ReachableAddresses**, a list of addresses and ports. Tor will obey
these restrictions when fetching directory information, using standard HTTP
GET requests. If not set explicitly then the value of
**ReachableAddresses** is used. If **HTTPProxy** is set then these
connections will go through that proxy.
**ReachableORAddresses** __ADDR__[/__MASK__][:__PORT__]...::
Like **ReachableAddresses**, a list of addresses and ports. Tor will obey
these restrictions when connecting to Onion Routers, using TLS/SSL. If not
set explicitly then the value of **ReachableAddresses** is used. If
**HTTPSProxy** is set then these connections will go through that proxy. +
+
The separation between **ReachableORAddresses** and
**ReachableDirAddresses** is only interesting when you are connecting
through proxies (see **HTTPProxy** and **HTTPSProxy**). Most proxies limit
TLS connections (which Tor uses to connect to Onion Routers) to port 443,
and some limit HTTP GET requests (which Tor uses for fetching directory
information) to port 80.
**HidServAuth** __onion-address__ __auth-cookie__ [__service-name__]::
Client authorization for a hidden service. Valid onion addresses contain 16
characters in a-z2-7 plus ".onion", and valid auth cookies contain 22
characters in A-Za-z0-9+/. The service name is only used for internal
purposes, e.g., for Tor controllers. This option may be used multiple times
for different hidden services. If a hidden service uses authorization and
this option is not set, the hidden service is not accessible. Hidden
services can be configured to require authorization using the
**HiddenServiceAuthorizeClient** option.
**CloseHSClientCircuitsImmediatelyOnTimeout** **0**|**1**::
If 1, Tor will close unfinished hidden service client circuits
which have not moved closer to connecting to their destination
hidden service when their internal state has not changed for the
duration of the current circuit-build timeout. Otherwise, such
circuits will be left open, in the hope that they will finish
connecting to their destination hidden services. In either case,
another set of introduction and rendezvous circuits for the same
destination hidden service will be launched. (Default: 0)
**CloseHSServiceRendCircuitsImmediatelyOnTimeout** **0**|**1**::
If 1, Tor will close unfinished hidden-service-side rendezvous
circuits after the current circuit-build timeout. Otherwise, such
circuits will be left open, in the hope that they will finish
connecting to their destinations. In either case, another
rendezvous circuit for the same destination client will be
launched. (Default: 0)
**LongLivedPorts** __PORTS__::
A list of ports for services that tend to have long-running connections
(e.g. chat and interactive shells). Circuits for streams that use these
ports will contain only high-uptime nodes, to reduce the chance that a node
will go down before the stream is finished. Note that the list is also
honored for circuits (both client and service side) involving hidden
services whose virtual port is in this list. (Default: 21, 22, 706,
1863, 5050, 5190, 5222, 5223, 6523, 6667, 6697, 8300)
**MapAddress** __address__ __newaddress__::
When a request for address arrives to Tor, it will transform to newaddress
before processing it. For example, if you always want connections to
www.example.com to exit via __torserver__ (where __torserver__ is the
nickname of the server), use "MapAddress www.example.com
www.example.com.torserver.exit". If the value is prefixed with a
"\*.", matches an entire domain. For example, if you
always want connections to example.com and any if its subdomains
to exit via
__torserver__ (where __torserver__ is the nickname of the server), use
"MapAddress \*.example.com \*.example.com.torserver.exit". (Note the
leading "*." in each part of the directive.) You can also redirect all
subdomains of a domain to a single address. For example, "MapAddress
*.example.com www.example.com". +
+
NOTES:
1. When evaluating MapAddress expressions Tor stops when it hits the most
recently added expression that matches the requested address. So if you
have the following in your torrc, www.torproject.org will map to 1.1.1.1:
MapAddress www.torproject.org 2.2.2.2
MapAddress www.torproject.org 1.1.1.1
2. Tor evaluates the MapAddress configuration until it finds no matches. So
if you have the following in your torrc, www.torproject.org will map to
2.2.2.2:
MapAddress 1.1.1.1 2.2.2.2
MapAddress www.torproject.org 1.1.1.1
3. The following MapAddress expression is invalid (and will be
ignored) because you cannot map from a specific address to a wildcard
address:
MapAddress www.torproject.org *.torproject.org.torserver.exit
4. Using a wildcard to match only part of a string (as in *ample.com) is
also invalid.
**NewCircuitPeriod** __NUM__::
Every NUM seconds consider whether to build a new circuit. (Default: 30
seconds)
**MaxCircuitDirtiness** __NUM__::
Feel free to reuse a circuit that was first used at most NUM seconds ago,
but never attach a new stream to a circuit that is too old. For hidden
services, this applies to the __last__ time a circuit was used, not the
first. (Default: 10 minutes)
**MaxClientCircuitsPending** __NUM__::
Do not allow more than NUM circuits to be pending at a time for handling
client streams. A circuit is pending if we have begun constructing it,
but it has not yet been completely constructed. (Default: 32)
**NodeFamily** __node__,__node__,__...__::
The Tor servers, defined by their identity fingerprints or nicknames,
constitute a "family" of similar or co-administered servers, so never use
any two of them in the same circuit. Defining a NodeFamily is only needed
when a server doesn't list the family itself (with MyFamily). This option
can be used multiple times. In addition to nodes, you can also list
IP address and ranges and country codes in {curly braces}.
**EnforceDistinctSubnets** **0**|**1**::
If 1, Tor will not put two servers whose IP addresses are "too close" on
the same circuit. Currently, two addresses are "too close" if they lie in
the same /16 range. (Default: 1)
**SOCKSPort** \['address':]__port__|**auto** [_isolation flags_]::
Open this port to listen for connections from SOCKS-speaking
applications. Set this to 0 if you don't want to allow application
connections via SOCKS. Set it to "auto" to have Tor pick a port for
you. This directive can be specified multiple times to bind
to multiple addresses/ports. (Default: 9050) +
+
The _isolation flags_ arguments give Tor rules for which streams
received on this SOCKSPort are allowed to share circuits with one
another. Recognized isolation flags are:
**IsolateClientAddr**;;
Don't share circuits with streams from a different
client address. (On by default and strongly recommended;
you can disable it with **NoIsolateClientAddr**.)
**IsolateSOCKSAuth**;;
Don't share circuits with streams for which different
SOCKS authentication was provided. (On by default;
you can disable it with **NoIsolateSOCKSAuth**.)
**IsolateClientProtocol**;;
Don't share circuits with streams using a different protocol.
(SOCKS 4, SOCKS 5, TransPort connections, NATDPort connections,
and DNSPort requests are all considered to be different protocols.)
**IsolateDestPort**;;
Don't share circuits with streams targetting a different
destination port.
**IsolateDestAddr**;;
Don't share circuits with streams targetting a different
destination address.
**SessionGroup=**__INT__;;
If no other isolation rules would prevent it, allow streams
on this port to share circuits with streams from every other
port with the same session group. (By default, streams received
on different SOCKSPorts, TransPorts, etc are always isolated from one
another. This option overrides that behavior.)
**SOCKSListenAddress** __IP__[:__PORT__]::
Bind to this address to listen for connections from Socks-speaking
applications. (Default: 127.0.0.1) You can also specify a port (e.g.
192.168.0.1:9100). This directive can be specified multiple times to bind
to multiple addresses/ports. (DEPRECATED: As of 0.2.3.x-alpha, you can
now use multiple SOCKSPort entries, and provide addresses for SOCKSPort
entries, so SOCKSListenAddress no longer has a purpose. For backward
compatibility, SOCKSListenAddress is only allowed when SOCKSPort is just
a port number.)
**SocksPolicy** __policy__,__policy__,__...__::
Set an entrance policy for this server, to limit who can connect to the
SocksPort and DNSPort ports. The policies have the same form as exit
policies below.
**SocksTimeout** __NUM__::
Let a socks connection wait NUM seconds handshaking, and NUM seconds
unattached waiting for an appropriate circuit, before we fail it. (Default:
2 minutes)
**TokenBucketRefillInterval** __NUM__ [**msec**|**second**]::
Set the refill interval of Tor's token bucket to NUM milliseconds.
NUM must be between 1 and 1000, inclusive. Note that the configured
bandwidth limits are still expressed in bytes per second: this
option only affects the frequency with which Tor checks to see whether
previously exhausted connections may read again. (Default: 100 msec)
**TrackHostExits** __host__,__.domain__,__...__::
For each value in the comma separated list, Tor will track recent
connections to hosts that match this value and attempt to reuse the same
exit node for each. If the value is prepended with a \'.\', it is treated as
matching an entire domain. If one of the values is just a \'.', it means
match everything. This option is useful if you frequently connect to sites
that will expire all your authentication cookies (i.e. log you out) if
your IP address changes. Note that this option does have the disadvantage
of making it more clear that a given history is associated with a single
user. However, most people who would wish to observe this will observe it
through cookies or other protocol-specific means anyhow.
**TrackHostExitsExpire** __NUM__::
Since exit servers go up and down, it is desirable to expire the
association between host and exit server after NUM seconds. The default is
1800 seconds (30 minutes).
**UpdateBridgesFromAuthority** **0**|**1**::
When set (along with UseBridges), Tor will try to fetch bridge descriptors
from the configured bridge authorities when feasible. It will fall back to
a direct request if the authority responds with a 404. (Default: 0)
**UseBridges** **0**|**1**::
When set, Tor will fetch descriptors for each bridge listed in the "Bridge"
config lines, and use these relays as both entry guards and directory
guards. (Default: 0)
**UseEntryGuards** **0**|**1**::
If this option is set to 1, we pick a few long-term entry servers, and try
to stick with them. This is desirable because constantly changing servers
increases the odds that an adversary who owns some servers will observe a
fraction of your paths. (Default: 1)
**NumEntryGuards** __NUM__::
If UseEntryGuards is set to 1, we will try to pick a total of NUM routers
as long-term entries for our circuits. (Default: 3)
**SafeSocks** **0**|**1**::
When this option is enabled, Tor will reject application connections that
use unsafe variants of the socks protocol -- ones that only provide an IP
address, meaning the application is doing a DNS resolve first.
Specifically, these are socks4 and socks5 when not doing remote DNS.
(Default: 0)
**TestSocks** **0**|**1**::
When this option is enabled, Tor will make a notice-level log entry for
each connection to the Socks port indicating whether the request used a
safe socks protocol or an unsafe one (see above entry on SafeSocks). This
helps to determine whether an application using Tor is possibly leaking
DNS requests. (Default: 0)
**WarnUnsafeSocks** **0**|**1**::
When this option is enabled, Tor will warn whenever a request is
received that only contains an IP address instead of a hostname. Allowing
applications to do DNS resolves themselves is usually a bad idea and
can leak your location to attackers. (Default: 1)
**VirtualAddrNetwork** __Address__/__bits__::
When Tor needs to assign a virtual (unused) address because of a MAPADDRESS
command from the controller or the AutomapHostsOnResolve feature, Tor
picks an unassigned address from this range. (Default:
127.192.0.0/10) +
+
When providing proxy server service to a network of computers using a tool
like dns-proxy-tor, change this address to "10.192.0.0/10" or
"172.16.0.0/12". The default **VirtualAddrNetwork** address range on a
properly configured machine will route to the loopback interface. For
local use, no change to the default VirtualAddrNetwork setting is needed.
**AllowNonRFC953Hostnames** **0**|**1**::
When this option is disabled, Tor blocks hostnames containing illegal
characters (like @ and :) rather than sending them to an exit node to be
resolved. This helps trap accidental attempts to resolve URLs and so on.
(Default: 0)
**AllowDotExit** **0**|**1**::
If enabled, we convert "www.google.com.foo.exit" addresses on the
SocksPort/TransPort/NATDPort into "www.google.com" addresses that exit from
the node "foo". Disabled by default since attacking websites and exit
relays can use it to manipulate your path selection. (Default: 0)
**FastFirstHopPK** **0**|**1**::
When this option is disabled, Tor uses the public key step for the first
hop of creating circuits. Skipping it is generally safe since we have
already used TLS to authenticate the relay and to establish forward-secure
keys. Turning this option off makes circuit building slower. +
+
Note that Tor will always use the public key step for the first hop if it's
operating as a relay, and it will never use the public key step if it
doesn't yet know the onion key of the first hop. (Default: 1)
**TransPort** \['address':]__port__|**auto** [_isolation flags_]::
Open this port to listen for transparent proxy connections. Set this to
0 if you don't want to allow transparent proxy connections. Set the port
to "auto" to have Tor pick a port for you. This directive can be
specified multiple times to bind to multiple addresses/ports. See
SOCKSPort for an explanation of isolation flags. +
+
TransPort requires OS support for transparent proxies, such as BSDs' pf or
Linux's IPTables. If you're planning to use Tor as a transparent proxy for
a network, you'll want to examine and change VirtualAddrNetwork from the
default setting. You'll also want to set the TransListenAddress option for
the network you'd like to proxy. (Default: 0)
**TransListenAddress** __IP__[:__PORT__]::
Bind to this address to listen for transparent proxy connections. (Default:
127.0.0.1). This is useful for exporting a transparent proxy server to an
entire network. (DEPRECATED: As of 0.2.3.x-alpha, you can
now use multiple TransPort entries, and provide addresses for TransPort
entries, so TransListenAddress no longer has a purpose. For backward
compatibility, TransListenAddress is only allowed when TransPort is just
a port number.)
**NATDPort** \['address':]__port__|**auto** [_isolation flags_]::
Open this port to listen for connections from old versions of ipfw (as
included in old versions of FreeBSD, etc) using the NATD protocol.
Use 0 if you don't want to allow NATD connections. Set the port
to "auto" to have Tor pick a port for you. This directive can be
specified multiple times to bind to multiple addresses/ports. See
SOCKSPort for an explanation of isolation flags. +
+
This option is only for people who cannot use TransPort. (Default: 0)
**NATDListenAddress** __IP__[:__PORT__]::
Bind to this address to listen for NATD connections. (DEPRECATED: As of
0.2.3.x-alpha, you can now use multiple NATDPort entries, and provide
addresses for NATDPort entries, so NATDListenAddress no longer has a
purpose. For backward compatibility, NATDListenAddress is only allowed
when NATDPort is just a port number.)
**AutomapHostsOnResolve** **0**|**1**::
When this option is enabled, and we get a request to resolve an address
that ends with one of the suffixes in **AutomapHostsSuffixes**, we map an
unused virtual address to that address, and return the new virtual address.
This is handy for making ".onion" addresses work with applications that
resolve an address and then connect to it. (Default: 0)
**AutomapHostsSuffixes** __SUFFIX__,__SUFFIX__,__...__::
A comma-separated list of suffixes to use with **AutomapHostsOnResolve**.
The "." suffix is equivalent to "all addresses." (Default: .exit,.onion).
**DNSPort** \['address':]__port__|**auto** [_isolation flags_]::
If non-zero, open this port to listen for UDP DNS requests, and resolve
them anonymously. Set the port to "auto" to have Tor pick a port for
you. This directive can be specified multiple times to bind to multiple
addresses/ports. See SOCKSPort for an explanation of isolation
flags. (Default: 0)
**DNSListenAddress** __IP__[:__PORT__]::
Bind to this address to listen for DNS connections. (DEPRECATED: As of
0.2.3.x-alpha, you can now use multiple DNSPort entries, and provide
addresses for DNSPort entries, so DNSListenAddress no longer has a
purpose. For backward compatibility, DNSListenAddress is only allowed
when DNSPort is just a port number.)
**ClientDNSRejectInternalAddresses** **0**|**1**::
If true, Tor does not believe any anonymously retrieved DNS answer that
tells it that an address resolves to an internal address (like 127.0.0.1 or
192.168.0.1). This option prevents certain browser-based attacks; don't
turn it off unless you know what you're doing. (Default: 1)
**ClientRejectInternalAddresses** **0**|**1**::
If true, Tor does not try to fulfill requests to connect to an internal
address (like 127.0.0.1 or 192.168.0.1) __unless a exit node is
specifically requested__ (for example, via a .exit hostname, or a
controller request). (Default: 1)
**DownloadExtraInfo** **0**|**1**::
If true, Tor downloads and caches "extra-info" documents. These documents
contain information about servers other than the information in their
regular router descriptors. Tor does not use this information for anything
itself; to save bandwidth, leave this option turned off. (Default: 0)
**FallbackNetworkstatusFile** __FILENAME__::
If Tor doesn't have a cached networkstatus file, it starts out using this
one instead. Even if this file is out of date, Tor can still use it to
learn about directory mirrors, so it doesn't need to put load on the
authorities. (Default: None)
**WarnPlaintextPorts** __port__,__port__,__...__::
Tells Tor to issue a warnings whenever the user tries to make an anonymous
connection to one of these ports. This option is designed to alert users
to services that risk sending passwords in the clear. (Default:
23,109,110,143)
**RejectPlaintextPorts** __port__,__port__,__...__::
Like WarnPlaintextPorts, but instead of warning about risky port uses, Tor
will instead refuse to make the connection. (Default: None)
**AllowSingleHopCircuits** **0**|**1**::
When this option is set, the attached Tor controller can use relays
that have the **AllowSingleHopExits** option turned on to build
one-hop Tor connections. (Default: 0)
**OptimisticData** **0**|**1**|**auto**::
When this option is set, and Tor is using an exit node that supports
the feature, it will try optimistically to send data to the exit node
without waiting for the exit node to report whether the connection
succeeded. This can save a round-trip time for protocols like HTTP
where the client talks first. If OptimisticData is set to **auto**,
Tor will look at the UseOptimisticData parameter in the networkstatus.
(Default: auto)
**Tor2webMode** **0**|**1**::
When this option is set, Tor connects to hidden services
**non-anonymously**. This option also disables client connections to
non-hidden-service hostnames through Tor. It **must only** be used when
running a tor2web Hidden Service web proxy.
To enable this option the compile time flag --enable-tor2webmode must be
specified. (Default: 0)
**UseMicrodescriptors** **0**|**1**|**auto**::
Microdescriptors are a smaller version of the information that Tor needs
in order to build its circuits. Using microdescriptors makes Tor clients
download less directory information, thus saving bandwidth. Directory
caches need to fetch regular descriptors and microdescriptors, so this
option doesn't save any bandwidth for them. If this option is set to
"auto" (recommended) then it is on for all clients that do not set
FetchUselessDescriptors. (Default: auto)
**PathBiasCircThreshold** __NUM__ +
**PathBiasNoticeRate** __NUM__ +
**PathBiasDisableRate** __NUM__ +
**PathBiasScaleThreshold** __NUM__ +
**PathBiasScaleFactor** __NUM__::
These options override the default behavior of Tor's (**currently
experimental**) path bias detection algorithm. To try to find broken or
misbehaving guard nodes, Tor looks for nodes where more than a certain
fraction of circuits through that node fail after the first hop. The
PathBiasCircThreshold option controls how many circuits we need to build
through a guard before we make these checks. The PathBiasNoticeRate and
PathBiasDisableRate options control what fraction of circuits must
succeed through a guard so we won't warn about it or disable it,
respectively. When we have seen more than PathBiasScaleThreshold
circuits through a guard, we divide our observations by
PathBiasScaleFactor, so that new observations don't get swamped by old
ones. +
+
By default, or if a negative value is provided for one of these options,
Tor uses reasonable defaults from the networkstatus consensus document.
If no defaults are available there, these options default to 20, .70,
0.0, 200, and 4 respectively.
**ClientUseIPv6** **0**|**1**::
If this option is set to 1, Tor might connect to entry nodes over
IPv6. Note that clients configured with an IPv6 address in a
**Bridge** line will try connecting over IPv6 even if
**ClientUseIPv6** is set to 0. (Default: 0)
**ClientPreferIPv6ORPort** **0**|**1**::
If this option is set to 1, Tor prefers an OR port with an IPv6
address over one with IPv4 if a given entry node has both. Other
things may influence the choice. This option breaks a tie to the
favor of IPv6. (Default: 0)
SERVER OPTIONS
--------------
The following options are useful only for servers (that is, if ORPort
is non-zero):
**Address** __address__::
The IP address or fully qualified domain name of this server (e.g.
moria.mit.edu). You can leave this unset, and Tor will guess your IP
address. This IP address is the one used to tell clients and other
servers where to find your Tor server; it doesn't affect the IP that your
Tor client binds to. To bind to a different address, use the
*ListenAddress and OutboundBindAddress options.
**AllowSingleHopExits** **0**|**1**::
This option controls whether clients can use this server as a single hop
proxy. If set to 1, clients can use this server as an exit even if it is
the only hop in the circuit. Note that most clients will refuse to use
servers that set this option, since most clients have
ExcludeSingleHopRelays set. (Default: 0)
**AssumeReachable** **0**|**1**::
This option is used when bootstrapping a new Tor network. If set to 1,
don't do self-reachability testing; just upload your server descriptor
immediately. If **AuthoritativeDirectory** is also set, this option
instructs the dirserver to bypass remote reachability testing too and list
all connected servers as running.
**BridgeRelay** **0**|**1**::
Sets the relay to act as a "bridge" with respect to relaying connections
from bridge users to the Tor network. It mainly causes Tor to publish a
server descriptor to the bridge database, rather than publishing a relay
descriptor to the public directory authorities.
**ContactInfo** __email_address__::
Administrative contact information for server. This line might get picked
up by spam harvesters, so you may want to obscure the fact that it's an
email address.
**ExitPolicy** __policy__,__policy__,__...__::
Set an exit policy for this server. Each policy is of the form
"**accept**|**reject** __ADDR__[/__MASK__][:__PORT__]". If /__MASK__ is
omitted then this policy just applies to the host given. Instead of giving
a host or network you can also use "\*" to denote the universe (0.0.0.0/0).
__PORT__ can be a single port number, an interval of ports
"__FROM_PORT__-__TO_PORT__", or "\*". If __PORT__ is omitted, that means
"\*". +
+
For example, "accept 18.7.22.69:\*,reject 18.0.0.0/8:\*,accept \*:\*" would
reject any traffic destined for MIT except for web.mit.edu, and accept
anything else. +
+
To specify all internal and link-local networks (including 0.0.0.0/8,
169.254.0.0/16, 127.0.0.0/8, 192.168.0.0/16, 10.0.0.0/8, and
172.16.0.0/12), you can use the "private" alias instead of an address.
These addresses are rejected by default (at the beginning of your exit
policy), along with your public IP address, unless you set the
ExitPolicyRejectPrivate config option to 0. For example, once you've done
that, you could allow HTTP to 127.0.0.1 and block all other connections to
internal networks with "accept 127.0.0.1:80,reject private:\*", though that
may also allow connections to your own computer that are addressed to its
public (external) IP address. See RFC 1918 and RFC 3330 for more details
about internal and reserved IP address space. +
+
This directive can be specified multiple times so you don't have to put it
all on one line. +
+
Policies are considered first to last, and the first match wins. If you
want to \_replace_ the default exit policy, end your exit policy with
either a reject \*:* or an accept \*:*. Otherwise, you're \_augmenting_
(prepending to) the default exit policy. The default exit policy is: +
reject *:25
reject *:119
reject *:135-139
reject *:445
reject *:563
reject *:1214
reject *:4661-4666
reject *:6346-6429
reject *:6699
reject *:6881-6999
accept *:*
**ExitPolicyRejectPrivate** **0**|**1**::
Reject all private (local) networks, along with your own public IP address,
at the beginning of your exit policy. See above entry on ExitPolicy.
(Default: 1)
**MaxOnionsPending** __NUM__::
If you have more than this number of onionskins queued for decrypt, reject
new ones. (Default: 100)
**MyFamily** __node__,__node__,__...__::
Declare that this Tor server is controlled or administered by a group or
organization identical or similar to that of the other servers, defined by
their identity fingerprints or nicknames. When two servers both declare
that they are in the same \'family', Tor clients will not use them in the
same circuit. (Each server only needs to list the other servers in its
family; it doesn't need to list itself, but it won't hurt.) Do not list
any bridge relay as it would compromise its concealment.
**Nickname** __name__::
Set the server's nickname to \'name'. Nicknames must be between 1 and 19
characters inclusive, and must contain only the characters [a-zA-Z0-9].
**NumCPUs** __num__::
How many processes to use at once for decrypting onionskins and other
parallelizable operations. If this is set to 0, Tor will try to detect
how many CPUs you have, defaulting to 1 if it can't tell. (Default: 0)
**ORPort** \['address':]__PORT__|**auto** [_flags_]::
Advertise this port to listen for connections from Tor clients and
servers. This option is required to be a Tor server.
Set it to "auto" to have Tor pick a port for you. Set it to 0 to not
run an ORPort at all. This option can occur more than once. (Default: 0)
+
Tor recognizes these flags on each ORPort:
**NoAdvertise**::
By default, we bind to a port and tell our users about it. If
NoAdvertise is specified, we don't advertise, but listen anyway. This
can be useful if the port everybody will be connecting to (for
example, one that's opened on our firewall) is somewhere else.
**NoListen**::
By default, we bind to a port and tell our users about it. If
NoListen is specified, we don't bind, but advertise anyway. This
can be useful if something else (for example, a firewall's port
forwarding configuration) is causing connections to reach us.
**IPv4Only**::
If the address is absent, or resolves to both an IPv4 and an IPv6
address, only listen to the IPv4 address.
**IPv6Only**::
If the address is absent, or resolves to both an IPv4 and an IPv6
address, only listen to the IPv6 address.
+
For obvious reasons, NoAdvertise and NoListen are mutually exclusive, and
IPv4Only and IPv6Only are mutually exclusive.
**ORListenAddress** __IP__[:__PORT__]::
Bind to this IP address to listen for connections from Tor clients and
servers. If you specify a port, bind to this port rather than the one
specified in ORPort. (Default: 0.0.0.0) This directive can be specified
multiple times to bind to multiple addresses/ports.
+
This option is deprecated; you can get the same behavior with ORPort now
that it supports NoAdvertise and explicit addresses.
**PortForwarding** **0**|**1**::
Attempt to automatically forward the DirPort and ORPort on a NAT router
connecting this Tor server to the Internet. If set, Tor will try both
NAT-PMP (common on Apple routers) and UPnP (common on routers from other
manufacturers). (Default: 0)
**PortForwardingHelper** __filename__|__pathname__::
If PortForwarding is set, use this executable to configure the forwarding.
If set to a filename, the system path will be searched for the executable.
If set to a path, only the specified path will be executed.
(Default: tor-fw-helper)
**PublishServerDescriptor** **0**|**1**|**v1**|**v2**|**v3**|**bridge**,**...**::
This option specifies which descriptors Tor will publish when acting as
a relay. You can
choose multiple arguments, separated by commas.
+
If this option is set to 0, Tor will not publish its
descriptors to any directories. (This is useful if you're testing
out your server, or if you're using a Tor controller that handles directory
publishing for you.) Otherwise, Tor will publish its descriptors of all
type(s) specified. The default is "1",
which means "if running as a server, publish the
appropriate descriptors to the authorities".
**ShutdownWaitLength** __NUM__::
When we get a SIGINT and we're a server, we begin shutting down:
we close listeners and start refusing new circuits. After **NUM**
seconds, we exit. If we get a second SIGINT, we exit immedi-
ately. (Default: 30 seconds)
**HeartbeatPeriod** __N__ **minutes**|**hours**|**days**|**weeks**::
Log a heartbeat message every **HeartbeatPeriod** seconds. This is
a log level __info__ message, designed to let you know your Tor
server is still alive and doing useful things. Settings this
to 0 will disable the heartbeat. (Default: 6 hours)
**AccountingMax** __N__ **bytes**|**KB**|**MB**|**GB**|**TB**::
Never send more than the specified number of bytes in a given accounting
period, or receive more than that number in the period. For example, with
AccountingMax set to 1 GB, a server could send 900 MB and receive 800 MB
and continue running. It will only hibernate once one of the two reaches 1
GB. When the number of bytes gets low, Tor will stop accepting new
connections and circuits. When the number of bytes
is exhausted, Tor will hibernate until some
time in the next accounting period. To prevent all servers from waking at
the same time, Tor will also wait until a random point in each period
before waking up. If you have bandwidth cost issues, enabling hibernation
is preferable to setting a low bandwidth, since it provides users with a
collection of fast servers that are up some of the time, which is more
useful than a set of slow servers that are always "available".
**AccountingStart** **day**|**week**|**month** [__day__] __HH:MM__::
Specify how long accounting periods last. If **month** is given, each
accounting period runs from the time __HH:MM__ on the __dayth__ day of one
month to the same day and time of the next. (The day must be between 1 and
28.) If **week** is given, each accounting period runs from the time __HH:MM__
of the __dayth__ day of one week to the same day and time of the next week,
with Monday as day 1 and Sunday as day 7. If **day** is given, each
accounting period runs from the time __HH:MM__ each day to the same time on
the next day. All times are local, and given in 24-hour time. (Default:
"month 1 0:00")
**RefuseUnknownExits** **0**|**1**|**auto**::
Prevent nodes that don't appear in the consensus from exiting using this
relay. If the option is 1, we always block exit attempts from such
nodes; if it's 0, we never do, and if the option is "auto", then we do
whatever the authorities suggest in the consensus. (Default: auto)
**ServerDNSResolvConfFile** __filename__::
Overrides the default DNS configuration with the configuration in
__filename__. The file format is the same as the standard Unix
"**resolv.conf**" file (7). This option, like all other ServerDNS options,
only affects name lookups that your server does on behalf of clients.
(Defaults to use the system DNS configuration.)
**ServerDNSAllowBrokenConfig** **0**|**1**::
If this option is false, Tor exits immediately if there are problems
parsing the system DNS configuration or connecting to nameservers.
Otherwise, Tor continues to periodically retry the system nameservers until
it eventually succeeds. (Default: 1)
**ServerDNSSearchDomains** **0**|**1**::
If set to 1, then we will search for addresses in the local search domain.
For example, if this system is configured to believe it is in
"example.com", and a client tries to connect to "www", the client will be
connected to "www.example.com". This option only affects name lookups that
your server does on behalf of clients. (Default: 0)
**ServerDNSDetectHijacking** **0**|**1**::
When this option is set to 1, we will test periodically to determine
whether our local nameservers have been configured to hijack failing DNS
requests (usually to an advertising site). If they are, we will attempt to
correct this. This option only affects name lookups that your server does
on behalf of clients. (Default: 1)
**ServerDNSTestAddresses** __address__,__address__,__...__::
When we're detecting DNS hijacking, make sure that these __valid__ addresses
aren't getting redirected. If they are, then our DNS is completely useless,
and we'll reset our exit policy to "reject *:*". This option only affects
name lookups that your server does on behalf of clients. (Default:
"www.google.com, www.mit.edu, www.yahoo.com, www.slashdot.org")
**ServerDNSAllowNonRFC953Hostnames** **0**|**1**::
When this option is disabled, Tor does not try to resolve hostnames
containing illegal characters (like @ and :) rather than sending them to an
exit node to be resolved. This helps trap accidental attempts to resolve
URLs and so on. This option only affects name lookups that your server does
on behalf of clients. (Default: 0)
**BridgeRecordUsageByCountry** **0**|**1**::
When this option is enabled and BridgeRelay is also enabled, and we have
GeoIP data, Tor keeps a keep a per-country count of how many client
addresses have contacted it so that it can help the bridge authority guess
which countries have blocked access to it. (Default: 1)
**ServerDNSRandomizeCase** **0**|**1**::
When this option is set, Tor sets the case of each character randomly in
outgoing DNS requests, and makes sure that the case matches in DNS replies.
This so-called "0x20 hack" helps resist some types of DNS poisoning attack.
For more information, see "Increased DNS Forgery Resistance through
0x20-Bit Encoding". This option only affects name lookups that your server
does on behalf of clients. (Default: 1)
**GeoIPFile** __filename__::
A filename containing GeoIP data, for use with BridgeRecordUsageByCountry.
**CellStatistics** **0**|**1**::
When this option is enabled, Tor writes statistics on the mean time that
cells spend in circuit queues to disk every 24 hours. (Default: 0)
**DirReqStatistics** **0**|**1**::
When this option is enabled, a Tor directory writes statistics on the
number and response time of network status requests to disk every 24
hours. (Default: 1)
**EntryStatistics** **0**|**1**::
When this option is enabled, Tor writes statistics on the number of
directly connecting clients to disk every 24 hours. (Default: 0)
**ExitPortStatistics** **0**|**1**::
When this option is enabled, Tor writes statistics on the number of relayed
bytes and opened stream per exit port to disk every 24 hours. (Default: 0)
**ConnDirectionStatistics** **0**|**1**::
When this option is enabled, Tor writes statistics on the bidirectional use
of connections to disk every 24 hours. (Default: 0)
**ExtraInfoStatistics** **0**|**1**::
When this option is enabled, Tor includes previously gathered statistics in
its extra-info documents that it uploads to the directory authorities.
(Default: 1)
**ExtendAllowPrivateAddresses** **0**|**1**::
When this option is enabled, Tor routers allow EXTEND request to
localhost, RFC1918 addresses, and so on. This can create security issues;
you should probably leave it off. (Default: 0)
DIRECTORY SERVER OPTIONS
------------------------
The following options are useful only for directory servers (that is,
if DirPort is non-zero):
**AuthoritativeDirectory** **0**|**1**::
When this option is set to 1, Tor operates as an authoritative directory
server. Instead of caching the directory, it generates its own list of
good servers, signs it, and sends that to the clients. Unless the clients
already have you listed as a trusted directory, you probably do not want
to set this option. Please coordinate with the other admins at
tor-ops@torproject.org if you think you should be a directory.
**DirPortFrontPage** __FILENAME__::
When this option is set, it takes an HTML file and publishes it as "/" on
the DirPort. Now relay operators can provide a disclaimer without needing
to set up a separate webserver. There's a sample disclaimer in
contrib/tor-exit-notice.html.
**V1AuthoritativeDirectory** **0**|**1**::
When this option is set in addition to **AuthoritativeDirectory**, Tor
generates version 1 directory and running-routers documents (for legacy
Tor clients up to 0.1.0.x).
**V2AuthoritativeDirectory** **0**|**1**::
When this option is set in addition to **AuthoritativeDirectory**, Tor
generates version 2 network statuses and serves descriptors, etc as
described in doc/spec/dir-spec-v2.txt (for Tor clients and servers running
0.1.1.x and 0.1.2.x).
**V3AuthoritativeDirectory** **0**|**1**::
When this option is set in addition to **AuthoritativeDirectory**, Tor
generates version 3 network statuses and serves descriptors, etc as
described in doc/spec/dir-spec.txt (for Tor clients and servers running at
least 0.2.0.x).
**VersioningAuthoritativeDirectory** **0**|**1**::
When this option is set to 1, Tor adds information on which versions of
Tor are still believed safe for use to the published directory. Each
version 1 authority is automatically a versioning authority; version 2
authorities provide this service optionally. See **RecommendedVersions**,
**RecommendedClientVersions**, and **RecommendedServerVersions**.
**NamingAuthoritativeDirectory** **0**|**1**::
When this option is set to 1, then the server advertises that it has
opinions about nickname-to-fingerprint bindings. It will include these
opinions in its published network-status pages, by listing servers with
the flag "Named" if a correct binding between that nickname and fingerprint
has been registered with the dirserver. Naming dirservers will refuse to
accept or publish descriptors that contradict a registered binding. See
**approved-routers** in the **FILES** section below.
**HSAuthoritativeDir** **0**|**1**::
When this option is set in addition to **AuthoritativeDirectory**, Tor also
accepts and serves v0 hidden service descriptors,
which are produced and used by Tor 0.2.1.x and older. (Default: 0)
**HidServDirectoryV2** **0**|**1**::
When this option is set, Tor accepts and serves v2 hidden service
descriptors. Setting DirPort is not required for this, because clients
connect via the ORPort by default. (Default: 1)
**BridgeAuthoritativeDir** **0**|**1**::
When this option is set in addition to **AuthoritativeDirectory**, Tor
accepts and serves router descriptors, but it caches and serves the main
networkstatus documents rather than generating its own. (Default: 0)
**MinUptimeHidServDirectoryV2** __N__ **seconds**|**minutes**|**hours**|**days**|**weeks**::
Minimum uptime of a v2 hidden service directory to be accepted as such by
authoritative directories. (Default: 25 hours)
**DirPort** \['address':]__PORT__|**auto** [_flags_]::
If this option is nonzero, advertise the directory service on this port.
Set it to "auto" to have Tor pick a port for you. This option can occur
more than once. (Default: 0)
+
The same flags are supported here as are supported by ORPort.
**DirListenAddress** __IP__[:__PORT__]::
Bind the directory service to this address. If you specify a port, bind to
this port rather than the one specified in DirPort. (Default: 0.0.0.0)
This directive can be specified multiple times to bind to multiple
addresses/ports.
+
This option is deprecated; you can get the same behavior with DirPort now
that it supports NoAdvertise and explicit addresses.
**DirPolicy** __policy__,__policy__,__...__::
Set an entrance policy for this server, to limit who can connect to the
directory ports. The policies have the same form as exit policies above.
**FetchV2Networkstatus** **0**|**1**::
If set, we try to fetch the (obsolete, unused) version 2 network status
consensus documents from the directory authorities. No currently
supported Tor version uses them. (Default: 0)
DIRECTORY AUTHORITY SERVER OPTIONS
----------------------------------
**RecommendedVersions** __STRING__::
STRING is a comma-separated list of Tor versions currently believed to be
safe. The list is included in each directory, and nodes which pull down the
directory learn whether they need to upgrade. This option can appear
multiple times: the values from multiple lines are spliced together. When
this is set then **VersioningAuthoritativeDirectory** should be set too.
**RecommendedClientVersions** __STRING__::
STRING is a comma-separated list of Tor versions currently believed to be
safe for clients to use. This information is included in version 2
directories. If this is not set then the value of **RecommendedVersions**
is used. When this is set then **VersioningAuthoritativeDirectory** should
be set too.
**RecommendedServerVersions** __STRING__::
STRING is a comma-separated list of Tor versions currently believed to be
safe for servers to use. This information is included in version 2
directories. If this is not set then the value of **RecommendedVersions**
is used. When this is set then **VersioningAuthoritativeDirectory** should
be set too.
**ConsensusParams** __STRING__::
STRING is a space-separated list of key=value pairs that Tor will include
in the "params" line of its networkstatus vote.
**DirAllowPrivateAddresses** **0**|**1**::
If set to 1, Tor will accept router descriptors with arbitrary "Address"
elements. Otherwise, if the address is not an IP address or is a private IP
address, it will reject the router descriptor. (Default: 0)
**AuthDirBadDir** __AddressPattern...__::
Authoritative directories only. A set of address patterns for servers that
will be listed as bad directories in any network status document this
authority publishes, if **AuthDirListBadDirs** is set.
**AuthDirBadExit** __AddressPattern...__::
Authoritative directories only. A set of address patterns for servers that
will be listed as bad exits in any network status document this authority
publishes, if **AuthDirListBadExits** is set.
**AuthDirInvalid** __AddressPattern...__::
Authoritative directories only. A set of address patterns for servers that
will never be listed as "valid" in any network status document that this
authority publishes.
**AuthDirReject** __AddressPattern__...::
Authoritative directories only. A set of address patterns for servers that
will never be listed at all in any network status document that this
authority publishes, or accepted as an OR address in any descriptor
submitted for publication by this authority.
**AuthDirBadDirCCs** __CC__,... +
**AuthDirBadExitCCs** __CC__,... +
**AuthDirInvalidCCs** __CC__,... +
**AuthDirRejectCCs** __CC__,...::
Authoritative directories only. These options contain a comma-separated
list of country codes such that any server in one of those country codes
will be marked as a bad directory/bad exit/invalid for use, or rejected
entirely.
**AuthDirListBadDirs** **0**|**1**::
Authoritative directories only. If set to 1, this directory has some
opinion about which nodes are unsuitable as directory caches. (Do not set
this to 1 unless you plan to list non-functioning directories as bad;
otherwise, you are effectively voting in favor of every declared
directory.)
**AuthDirListBadExits** **0**|**1**::
Authoritative directories only. If set to 1, this directory has some
opinion about which nodes are unsuitable as exit nodes. (Do not set this to
1 unless you plan to list non-functioning exits as bad; otherwise, you are
effectively voting in favor of every declared exit as an exit.)
**AuthDirRejectUnlisted** **0**|**1**::
Authoritative directories only. If set to 1, the directory server rejects
all uploaded server descriptors that aren't explicitly listed in the
fingerprints file. This acts as a "panic button" if we get hit with a Sybil
attack. (Default: 0)
**AuthDirMaxServersPerAddr** __NUM__::
Authoritative directories only. The maximum number of servers that we will
list as acceptable on a single IP address. Set this to "0" for "no limit".
(Default: 2)
**AuthDirMaxServersPerAuthAddr** __NUM__::
Authoritative directories only. Like AuthDirMaxServersPerAddr, but applies
to addresses shared with directory authorities. (Default: 5)
**AuthDirFastGuarantee** __N__ **bytes**|**KB**|**MB**|**GB**::
Authoritative directories only. If non-zero, always vote the
Fast flag for any relay advertising this amount of capacity or
more. (Default: 100 KB)
**AuthDirGuardBWGuarantee** __N__ **bytes**|**KB**|**MB**|**GB**::
Authoritative directories only. If non-zero, this advertised capacity
or more is always sufficient to satisfy the bandwidth requirement
for the Guard flag. (Default: 250 KB)
**BridgePassword** __Password__::
If set, contains an HTTP authenticator that tells a bridge authority to
serve all requested bridge information. Used by the (only partially
implemented) "bridge community" design, where a community of bridge
relay operators all use an alternate bridge directory authority,
and their target user audience can periodically fetch the list of
available community bridges to stay up-to-date. (Default: not set)
**V3AuthVotingInterval** __N__ **minutes**|**hours**::
V3 authoritative directories only. Configures the server's preferred voting
interval. Note that voting will __actually__ happen at an interval chosen
by consensus from all the authorities' preferred intervals. This time
SHOULD divide evenly into a day. (Default: 1 hour)
**V3AuthVoteDelay** __N__ **minutes**|**hours**::
V3 authoritative directories only. Configures the server's preferred delay
between publishing its vote and assuming it has all the votes from all the
other authorities. Note that the actual time used is not the server's
preferred time, but the consensus of all preferences. (Default: 5 minutes)
**V3AuthDistDelay** __N__ **minutes**|**hours**::
V3 authoritative directories only. Configures the server's preferred delay
between publishing its consensus and signature and assuming it has all the
signatures from all the other authorities. Note that the actual time used
is not the server's preferred time, but the consensus of all preferences.
(Default: 5 minutes)
**V3AuthNIntervalsValid** __NUM__::
V3 authoritative directories only. Configures the number of VotingIntervals
for which each consensus should be valid for. Choosing high numbers
increases network partitioning risks; choosing low numbers increases
directory traffic. Note that the actual number of intervals used is not the
server's preferred number, but the consensus of all preferences. Must be at
least 2. (Default: 3)
**V3BandwidthsFile** __FILENAME__::
V3 authoritative directories only. Configures the location of the
bandwidth-authority generated file storing information on relays' measured
bandwidth capacities. (Default: unset)
**V3AuthUseLegacyKey** **0**|**1**::
If set, the directory authority will sign consensuses not only with its
own signing key, but also with a "legacy" key and certificate with a
different identity. This feature is used to migrate directory authority
keys in the event of a compromise. (Default: 0)
**RephistTrackTime** __N__ **seconds**|**minutes**|**hours**|**days**|**weeks**::
Tells an authority, or other node tracking node reliability and history,
that fine-grained information about nodes can be discarded when it hasn't
changed for a given amount of time. (Default: 24 hours)
**VoteOnHidServDirectoriesV2** **0**|**1**::
When this option is set in addition to **AuthoritativeDirectory**, Tor
votes on whether to accept relays as hidden service directories.
(Default: 1)
**AuthDirHasIPv6Connectivity** **0**|**1**::
Authoritative directories only. When set to 0, OR ports with an
IPv6 address are being accepted without reachability testing.
When set to 1, IPv6 OR ports are being tested just like IPv4 OR
ports. (Default: 0)
HIDDEN SERVICE OPTIONS
----------------------
The following options are used to configure a hidden service.
**HiddenServiceDir** __DIRECTORY__::
Store data files for a hidden service in DIRECTORY. Every hidden service
must have a separate directory. You may use this option multiple times to
specify multiple services. DIRECTORY must be an existing directory.
**HiddenServicePort** __VIRTPORT__ [__TARGET__]::
Configure a virtual port VIRTPORT for a hidden service. You may use this
option multiple times; each time applies to the service using the most
recent hiddenservicedir. By default, this option maps the virtual port to
the same port on 127.0.0.1. You may override the target port, address, or
both by specifying a target of addr, port, or addr:port. You may also have
multiple lines with the same VIRTPORT: when a user connects to that
VIRTPORT, one of the TARGETs from those lines will be chosen at random.
**PublishHidServDescriptors** **0**|**1**::
If set to 0, Tor will run any hidden services you configure, but it won't
advertise them to the rendezvous directory. This option is only useful if
you're using a Tor controller that handles hidserv publishing for you.
(Default: 1)
**HiddenServiceVersion** __version__,__version__,__...__::
A list of rendezvous service descriptor versions to publish for the hidden
service. Currently, only version 2 is supported. (Default: 2)
**HiddenServiceAuthorizeClient** __auth-type__ __client-name__,__client-name__,__...__::
If configured, the hidden service is accessible for authorized clients
only. The auth-type can either be \'basic' for a general-purpose
authorization protocol or \'stealth' for a less scalable protocol that also
hides service activity from unauthorized clients. Only clients that are
listed here are authorized to access the hidden service. Valid client names
are 1 to 19 characters long and only use characters in A-Za-z0-9+-_ (no
spaces). If this option is set, the hidden service is not accessible for
clients without authorization any more. Generated authorization data can be
found in the hostname file. Clients need to put this authorization data in
their configuration file using **HidServAuth**.
**RendPostPeriod** __N__ **seconds**|**minutes**|**hours**|**days**|**weeks**::
Every time the specified period elapses, Tor uploads any rendezvous
service descriptors to the directory servers. This information is also
uploaded whenever it changes. (Default: 1 hour)
TESTING NETWORK OPTIONS
-----------------------
The following options are used for running a testing Tor network.
**TestingTorNetwork** **0**|**1**::
If set to 1, Tor adjusts default values of the configuration options below,
so that it is easier to set up a testing Tor network. May only be set if
non-default set of DirServers is set. Cannot be unset while Tor is running.
(Default: 0) +
ServerDNSAllowBrokenConfig 1
DirAllowPrivateAddresses 1
EnforceDistinctSubnets 0
AssumeReachable 1
AuthDirMaxServersPerAddr 0
AuthDirMaxServersPerAuthAddr 0
ClientDNSRejectInternalAddresses 0
ClientRejectInternalAddresses 0
CountPrivateBandwidth 1
ExitPolicyRejectPrivate 0
ExtendAllowPrivateAddresses 1
V3AuthVotingInterval 5 minutes
V3AuthVoteDelay 20 seconds
V3AuthDistDelay 20 seconds
MinUptimeHidServDirectoryV2 0 seconds
TestingV3AuthInitialVotingInterval 5 minutes
TestingV3AuthInitialVoteDelay 20 seconds
TestingV3AuthInitialDistDelay 20 seconds
TestingAuthDirTimeToLearnReachability 0 minutes
TestingEstimatedDescriptorPropagationTime 0 minutes
**TestingV3AuthInitialVotingInterval** __N__ **minutes**|**hours**::
Like V3AuthVotingInterval, but for initial voting interval before the first
consensus has been created. Changing this requires that
**TestingTorNetwork** is set. (Default: 30 minutes)
**TestingV3AuthInitialVoteDelay** __N__ **minutes**|**hours**::
Like TestingV3AuthInitialVoteDelay, but for initial voting interval before
the first consensus has been created. Changing this requires that
**TestingTorNetwork** is set. (Default: 5 minutes)
**TestingV3AuthInitialDistDelay** __N__ **minutes**|**hours**::
Like TestingV3AuthInitialDistDelay, but for initial voting interval before
the first consensus has been created. Changing this requires that
**TestingTorNetwork** is set. (Default: 5 minutes)
**TestingAuthDirTimeToLearnReachability** __N__ **minutes**|**hours**::
After starting as an authority, do not make claims about whether routers
are Running until this much time has passed. Changing this requires
that **TestingTorNetwork** is set. (Default: 30 minutes)
**TestingEstimatedDescriptorPropagationTime** __N__ **minutes**|**hours**::
Clients try downloading router descriptors from directory caches after this
time. Changing this requires that **TestingTorNetwork** is set. (Default:
10 minutes)
SIGNALS
-------
Tor catches the following signals:
**SIGTERM**::
Tor will catch this, clean up and sync to disk if necessary, and exit.
**SIGINT**::
Tor clients behave as with SIGTERM; but Tor servers will do a controlled
slow shutdown, closing listeners and waiting 30 seconds before exiting.
(The delay can be configured with the ShutdownWaitLength config option.)
**SIGHUP**::
The signal instructs Tor to reload its configuration (including closing and
reopening logs), and kill and restart its helper processes if applicable.
**SIGUSR1**::
Log statistics about current connections, past connections, and throughput.
**SIGUSR2**::
Switch all logs to loglevel debug. You can go back to the old loglevels by
sending a SIGHUP.
**SIGCHLD**::
Tor receives this signal when one of its helper processes has exited, so it
can clean up.
**SIGPIPE**::
Tor catches this signal and ignores it.
**SIGXFSZ**::
If this signal exists on your platform, Tor catches and ignores it.
FILES
-----
**@CONFDIR@/torrc**::
The configuration file, which contains "option value" pairs.
**@LOCALSTATEDIR@/lib/tor/**::
The tor process stores keys and other data here.
__DataDirectory__**/cached-status/**::
The most recently downloaded network status document for each authority.
Each file holds one such document; the filenames are the hexadecimal
identity key fingerprints of the directory authorities. Mostly obsolete.
__DataDirectory__**/cached-consensus** and/or **cached-microdesc-consensus**::
The most recent consensus network status document we've downloaded.
__DataDirectory__**/cached-descriptors** and **cached-descriptors.new**::
These files hold downloaded router statuses. Some routers may appear more
than once; if so, the most recently published descriptor is used. Lines
beginning with @-signs are annotations that contain more information about
a given router. The ".new" file is an append-only journal; when it gets
too large, all entries are merged into a new cached-descriptors file.
__DataDirectory__**/cached-microdescs** and **cached-microdescs.new**::
These files hold downloaded microdescriptors. Lines beginning with
@-signs are annotations that contain more information about a given
router. The ".new" file is an append-only journal; when it gets too
large, all entries are merged into a new cached-microdescs file.
__DataDirectory__**/cached-routers** and **cached-routers.new**::
Obsolete versions of cached-descriptors and cached-descriptors.new. When
Tor can't find the newer files, it looks here instead.
__DataDirectory__**/state**::
A set of persistent key-value mappings. These are documented in
the file. These include:
- The current entry guards and their status.
- The current bandwidth accounting values (unused so far; see
below).
- When the file was last written
- What version of Tor generated the state file
- A short history of bandwidth usage, as produced in the router
descriptors.
__DataDirectory__**/bw_accounting**::
Used to track bandwidth accounting values (when the current period starts
and ends; how much has been read and written so far this period). This file
is obsolete, and the data is now stored in the \'state' file as well. Only
used when bandwidth accounting is enabled.
__DataDirectory__**/control_auth_cookie**::
Used for cookie authentication with the controller. Location can be
overridden by the CookieAuthFile config option. Regenerated on startup. See
control-spec.txt for details. Only used when cookie authentication is
enabled.
__DataDirectory__**/keys/***::
Only used by servers. Holds identity keys and onion keys.
__DataDirectory__**/fingerprint**::
Only used by servers. Holds the fingerprint of the server's identity key.
__DataDirectory__**/approved-routers**::
Only for naming authoritative directory servers (see
**NamingAuthoritativeDirectory**). This file lists nickname to identity
bindings. Each line lists a nickname and a fingerprint separated by
whitespace. See your **fingerprint** file in the __DataDirectory__ for an
example line. If the nickname is **!reject** then descriptors from the
given identity (fingerprint) are rejected by this server. If it is
**!invalid** then descriptors are accepted but marked in the directory as
not valid, that is, not recommended.
__DataDirectory__**/router-stability**::
Only used by authoritative directory servers. Tracks measurements for
router mean-time-between-failures so that authorities have a good idea of
how to set their Stable flags.
__HiddenServiceDirectory__**/hostname**::
The <base32-encoded-fingerprint>.onion domain name for this hidden service.
If the hidden service is restricted to authorized clients only, this file
also contains authorization data for all clients.
__HiddenServiceDirectory__**/private_key**::
The private key for this hidden service.
__HiddenServiceDirectory__**/client_keys**::
Authorization data for a hidden service that is only accessible by
authorized clients.
SEE ALSO
--------
**privoxy**(1), **tsocks**(1), **torify**(1) +
**https://www.torproject.org/**
BUGS
----
Plenty, probably. Tor is still in development. Please report them.
AUTHORS
-------
Roger Dingledine [arma at mit.edu], Nick Mathewson [nickm at alum.mit.edu].
Reference in New Issue View Git Blame Copy Permalink