nihilist/tor
1
0
Fork 0
mirror of https://gitlab.torproject.org/tpo/core/tor.git synced 2024-11-24 12:23:32 +01:00
Code Issues Packages Projects Releases Wiki Activity
b3618cccf5
tor/doc/spec/control-spec.txt
Nick Mathewson c0c2001a5b r16279@catbus: nickm | 2007-10-30 11:14:29 -0400 
Improved skew reporting:  "You are 365 days in the duture" is more useful than "You are 525600 minutes in the future".  Also, when we get something that proves we are at least an hour in the past, tell the controller "CLOCK_SKEW MIN_SKEW=-3600" rather than just "CLOCK_SKEW"


svn:r12283
2007-10-30 15:17:07 +00:00

1531 lines
61 KiB
Plaintext
Raw Blame History

$Id$
TC: A Tor control protocol (Version 1)
0. Scope
This document describes an implementation-specific protocol that is used
for other programs (such as frontend user-interfaces) to communicate with a
locally running Tor process. It is not part of the Tor onion routing
protocol.
This protocol replaces version 0 of TC, which is now deprecated. For
reference, TC is described in "control-spec-v0.txt". Implementors are
recommended to avoid using TC directly, but instead to use a library that
can easily be updated to use the newer protocol. (Version 0 is used by Tor
versions 0.1.0.x; the protocol in this document only works with Tor
versions in the 0.1.1.x series and later.)
1. Protocol outline
TC is a bidirectional message-based protocol. It assumes an underlying
stream for communication between a controlling process (the "client"
or "controller") and a Tor process (or "server"). The stream may be
implemented via TCP, TLS-over-TCP, a Unix-domain socket, or so on,
but it must provide reliable in-order delivery. For security, the
stream should not be accessible by untrusted parties.
In TC, the client and server send typed messages to each other over the
underlying stream. The client sends "commands" and the server sends
"replies".
By default, all messages from the server are in response to messages from
the client. Some client requests, however, will cause the server to send
messages to the client indefinitely far into the future. Such
"asynchronous" replies are marked as such.
Servers respond to messages in the order messages are received.
2. Message format
2.1. Description format
The message formats listed below use ABNF as described in RFC 2234.
The protocol itself is loosely based on SMTP (see RFC 2821).
We use the following nonterminals from RFC 2822: atom, qcontent
We define the following general-use nonterminals:
String = DQUOTE *qcontent DQUOTE
There are explicitly no limits on line length. All 8-bit characters are
permitted unless explicitly disallowed.
Wherever CRLF is specified to be accepted from the controller, Tor MAY also
accept LF. Tor, however, MUST NOT generate LF instead of CRLF.
Controllers SHOULD always send CRLF.
2.2. Commands from controller to Tor
Command = Keyword Arguments CRLF / "+" Keyword Arguments CRLF Data
Keyword = 1*ALPHA
Arguments = *(SP / VCHAR)
Specific commands and their arguments are described below in section 3.
2.3. Replies from Tor to the controller
Reply = SyncReply / AsyncReply
SyncReply = *(MidReplyLine / DataReplyLine) EndReplyLine
AsyncReply = *(MidReplyLine / DataReplyLine) EndReplyLine
MidReplyLine = StatusCode "-" ReplyLine
DataReplyLine = StatusCode "+" ReplyLine Data
EndReplyLine = StatusCode SP ReplyLine
ReplyLine = [ReplyText] CRLF
ReplyText = XXXX
StatusCode = 3DIGIT
Specific replies are mentioned below in section 3, and described more fully
in section 4.
[Compatibility note: versions of Tor before 0.2.0.3-alpha sometimes
generate AsyncReplies of the form "*(MidReplyLine / DataReplyLine)".
This is incorrect, but controllers that need to work with these
versions of Tor should be prepared to get multi-line AsyncReplies with
the final line (usually "650 OK") omitted.]
2.4. General-use tokens
; Identifiers for servers.
ServerID = Nickname / Fingerprint
Nickname = 1*19 NicknameChar
NicknameChar = "a"-"z" / "A"-"Z" / "0" - "9"
Fingerprint = "$" 40*HEXDIG
; A "=" indicates that the given nickname is canonical; a "~" indicates
; that the given nickname is not canonical.
LongName = Fingerprint [ ( "=" / "~" ) Nickname ]
; How a controller tells Tor about a particular OR. There are four
; possible formats:
; $Digest -- The router whose identity key hashes to the given digest.
; This is the preferred way to refer to an OR.
; $Digest~Name -- The router whose identity key hashes to the given
; digest, but only if the router has the given nickname.
; $Digest=Name -- The router whose identity key hashes to the given
; digest, but only if the router is Named and has the given
; nickname.
; Name -- The Named router with the given nickname, or, if no such
; router exists, any router whose nickname matches the one given.
; This is not a safe way to refer to routers, since Named status
; could under some circumstances change over time.
ServerSpec = LongName / Nickname
; Unique identifiers for streams or circuits. Currently, Tor only
; uses digits, but this may change
StreamID = 1*16 IDChar
CircuitID = 1*16 IDChar
IDChar = ALPHA / DIGIT
Address = ip4-address / ip6-address / hostname (XXXX Define these)
; A "Data" section is a sequence of octets concluded by the terminating
; sequence CRLF "." CRLF. The terminating sequence may not appear in the
; body of the data. Leading periods on lines in the data are escaped with
; an additional leading period as in RFC 2821 section 4.5.2.
Data = *DataLine "." CRLF
DataLine = CRLF / "." 1*LineItem CRLF / NonDotItem *LineItem CRLF
LineItem = NonCR / 1*CR NonCRLF
NonDotItem = NonDotCR / 1*CR NonCRLF
3. Commands
All commands are case-insensitive, but most keywords are case-sensitive.
3.1. SETCONF
Change the value of one or more configuration variables. The syntax is:
"SETCONF" 1*(SP keyword ["=" String]) CRLF
Tor behaves as though it had just read each of the key-value pairs
from its configuration file. Keywords with no corresponding values have
their configuration values reset to 0 or NULL (use RESETCONF if you want
to set it back to its default). SETCONF is all-or-nothing: if there
is an error in any of the configuration settings, Tor sets none of them.
Tor responds with a "250 configuration values set" reply on success.
If some of the listed keywords can't be found, Tor replies with a
"552 Unrecognized option" message. Otherwise, Tor responds with a
"513 syntax error in configuration values" reply on syntax error, or a
"553 impossible configuration setting" reply on a semantic error.
When a configuration option takes multiple values, or when multiple
configuration keys form a context-sensitive group (see GETCONF below), then
setting _any_ of the options in a SETCONF command is taken to reset all of
the others. For example, if two ORBindAddress values are configured, and a
SETCONF command arrives containing a single ORBindAddress value, the new
command's value replaces the two old values.
3.2. RESETCONF
Remove all settings for a given configuration option entirely, assign
its default value (if any), and then assign the String provided.
Typically the String is left empty, to simply set an option back to
its default. The syntax is:
"RESETCONF" 1*(SP keyword ["=" String]) CRLF
Otherwise it behaves like SETCONF above.
3.3. GETCONF
Request the value of a configuration variable. The syntax is:
"GETCONF" 1*(SP keyword) CRLF
If all of the listed keywords exist in the Tor configuration, Tor replies
with a series of reply lines of the form:
250 keyword=value
If any option is set to a 'default' value semantically different from an
empty string, Tor may reply with a reply line of the form:
250 keyword
If some of the listed keywords can't be found, Tor replies with a
"552 unknown configuration keyword" message.
If an option appears multiple times in the configuration, all of its
key-value pairs are returned in order.
Some options are context-sensitive, and depend on other options with
different keywords. These cannot be fetched directly. Currently there
is only one such option: clients should use the "HiddenServiceOptions"
virtual keyword to get all HiddenServiceDir, HiddenServicePort,
HiddenServiceNodes, and HiddenServiceExcludeNodes option settings.
3.4. SETEVENTS
Request the server to inform the client about interesting events. The
syntax is:
"SETEVENTS" [SP "EXTENDED"] *(SP EventCode) CRLF
EventCode = "CIRC" / "STREAM" / "ORCONN" / "BW" / "DEBUG" /
"INFO" / "NOTICE" / "WARN" / "ERR" / "NEWDESC" / "ADDRMAP" /
"AUTHDIR_NEWDESCS" / "DESCCHANGED" / "STATUS_GENERAL" /
"STATUS_CLIENT" / "STATUS_SERVER" / "GUARD" / "NS" / "STREAM_BW"
Any events *not* listed in the SETEVENTS line are turned off; thus, sending
SETEVENTS with an empty body turns off all event reporting.
The server responds with a "250 OK" reply on success, and a "552
Unrecognized event" reply if one of the event codes isn't recognized. (On
error, the list of active event codes isn't changed.)
If the flag string "EXTENDED" is provided, Tor may provide extra
information with events for this connection; see 4.1 for more information.
NOTE: All events on a given connection will be provided in extended format,
or none.
NOTE: "EXTENDED" is only supported in Tor 0.1.1.9-alpha or later.
Each event is described in more detail in Section 4.1.
3.5. AUTHENTICATE
Sent from the client to the server. The syntax is:
"AUTHENTICATE" [ SP 1*HEXDIG / QuotedString ] CRLF
The server responds with "250 OK" on success or "515 Bad authentication" if
the authentication cookie is incorrect. Tor closes the connection on an
authentication failure.
The format of the 'cookie' is implementation-dependent; see 5.1 below for
information on how the standard Tor implementation handles it.
Before the client has authenticated, no command other than PROTOCOLINFO,
AUTHENTICATE, or QUIT is valid. If the controller sends any other command,
or sends a malformed command, or sends an unsuccessful AUTHENTICATE
command, or sends PROTOCOLINFO more than once, Tor sends an error reply and
closes the connection.
(Versions of Tor before 0.1.2.16 and 0.2.0.4-alpha did not close the
connection after an authentication failure.)
3.6. SAVECONF
Sent from the client to the server. The syntax is:
"SAVECONF" CRLF
Instructs the server to write out its config options into its torrc. Server
returns "250 OK" if successful, or "551 Unable to write configuration
to disk" if it can't write the file or some other error occurs.
3.7. SIGNAL
Sent from the client to the server. The syntax is:
"SIGNAL" SP Signal CRLF
Signal = "RELOAD" / "SHUTDOWN" / "DUMP" / "DEBUG" / "HALT" /
"HUP" / "INT" / "USR1" / "USR2" / "TERM" / "NEWNYM" /
"CLEARDNSCACHE"
The meaning of the signals are:
RELOAD -- Reload: reload config items, refetch directory. (like HUP)
SHUTDOWN -- Controlled shutdown: if server is an OP, exit immediately.
If it's an OR, close listeners and exit after 30 seconds.
(like INT)
DUMP -- Dump stats: log information about open connections and
circuits. (like USR1)
DEBUG -- Debug: switch all open logs to loglevel debug. (like USR2)
HALT -- Immediate shutdown: clean up and exit now. (like TERM)
CLEARDNSCACHE -- Forget the client-side cached IPs for all hostnames.
NEWNYM -- Switch to clean circuits, so new application requests
don't share any circuits with old ones. Also clears
the client-side DNS cache. (Tor MAY rate-limit its
response to this signal.)
The server responds with "250 OK" if the signal is recognized (or simply
closes the socket if it was asked to close immediately), or "552
Unrecognized signal" if the signal is unrecognized.
3.8. MAPADDRESS
Sent from the client to the server. The syntax is:
"MAPADDRESS" 1*(Address "=" Address SP) CRLF
The first address in each pair is an "original" address; the second is a
"replacement" address. The client sends this message to the server in
order to tell it that future SOCKS requests for connections to the original
address should be replaced with connections to the specified replacement
address. If the addresses are well-formed, and the server is able to
fulfill the request, the server replies with a 250 message:
250-OldAddress1=NewAddress1
250 OldAddress2=NewAddress2
containing the source and destination addresses. If request is
malformed, the server replies with "512 syntax error in command
argument". If the server can't fulfill the request, it replies with
"451 resource exhausted".
The client may decline to provide a body for the original address, and
instead send a special null address ("0.0.0.0" for IPv4, "::0" for IPv6, or
"." for hostname), signifying that the server should choose the original
address itself, and return that address in the reply. The server
should ensure that it returns an element of address space that is unlikely
to be in actual use. If there is already an address mapped to the
destination address, the server may reuse that mapping.
If the original address is already mapped to a different address, the old
mapping is removed. If the original address and the destination address
are the same, the server removes any mapping in place for the original
address.
Example:
C: MAPADDRESS 0.0.0.0=torproject.org 1.2.3.4=tor.freehaven.net
S: 250-127.192.10.10=torproject.org
S: 250 1.2.3.4=tor.freehaven.net
{Note: This feature is designed to be used to help Tor-ify applications
that need to use SOCKS4 or hostname-less SOCKS5. There are three
approaches to doing this:
1. Somehow make them use SOCKS4a or SOCKS5-with-hostnames instead.
2. Use tor-resolve (or another interface to Tor's resolve-over-SOCKS
feature) to resolve the hostname remotely. This doesn't work
with special addresses like x.onion or x.y.exit.
3. Use MAPADDRESS to map an IP address to the desired hostname, and then
arrange to fool the application into thinking that the hostname
has resolved to that IP.
This functionality is designed to help implement the 3rd approach.}
Mappings set by the controller last until the Tor process exits:
they never expire. If the controller wants the mapping to last only
a certain time, then it must explicitly un-map the address when that
time has elapsed.
3.9. GETINFO
Sent from the client to the server. The syntax is as for GETCONF:
"GETINFO" 1*(SP keyword) CRLF
one or more NL-terminated strings. The server replies with an INFOVALUE
message, or a 551 or 552 error.
Unlike GETCONF, this message is used for data that are not stored in the Tor
configuration file, and that may be longer than a single line. On success,
one ReplyLine is sent for each requested value, followed by a final 250 OK
ReplyLine. If a value fits on a single line, the format is:
250-keyword=value
If a value must be split over multiple lines, the format is:
250+keyword=
value
.
Recognized keys and their values include:
"version" -- The version of the server's software, including the name
of the software. (example: "Tor 0.0.9.4")
"config-file" -- The location of Tor's configuration file ("torrc").
["exit-policy/prepend" -- The default exit policy lines that Tor will
*prepend* to the ExitPolicy config option.
-- Never implemented. Useful?]
"exit-policy/default" -- The default exit policy lines that Tor will
*append* to the ExitPolicy config option.
"desc/id/<OR identity>" or "desc/name/<OR nickname>" -- the latest
server descriptor for a given OR, NUL-terminated.
"extra-info/digest/<digest>" -- the extrainfo document whose digest (in
hex) is <digest>. Only available if we're downloading extra-info
documents.
"ns/id/<OR identity>" or "ns/name/<OR nickname>" -- the latest network
status info for a given OR. Network status info is as given in
dir-spec.txt, and reflects the current beliefs of this Tor about the
router in question. Like directory clients, controllers MUST
tolerate unrecognized flags and lines. The published date and
descriptor digest are those believed to be best by this Tor,
not necessarily those for a descriptor that Tor currently has.
[First implemented in 0.1.2.3-alpha.]
"ns/all" -- Network status info (v2 directory style) for all ORs we
have an opinion about, joined by newlines. [First implemented
in 0.1.2.3-alpha.]
"desc/all-recent" -- the latest server descriptor for every router that
Tor knows about.
"network-status" -- a space-separated list (v1 directory style)
of all known OR identities. This is in the same format as the
router-status line in v1 directories; see dir-spec-v1.txt section
3 for details. (If VERBOSE_NAMES is enabled, the output will
not conform to dir-spec-v1.txt; instead, the result will be a
space-separated list of LongName, each preceded by a "!" if it is
believed to be not running.)
"address-mappings/all"
"address-mappings/config"
"address-mappings/cache"
"address-mappings/control" -- a \r\n-separated list of address
mappings, each in the form of "from-address to-address expiry".
The 'config' key returns those address mappings set in the
configuration; the 'cache' key returns the mappings in the
client-side DNS cache; the 'control' key returns the mappings set
via the control interface; the 'all' target returns the mappings
set through any mechanism.
Expiry is formatted as with ADDRMAP events, except that "expiry" is
always a time in GMT or the string "NEVER"; see section 4.1.7.
First introduced in 0.2.0.3-alpha.
"addr-mappings/*" -- as for address-mappings/*, but without the
expiry portion of the value. Use of this value is deprecated
since 0.2.0.3-alpha; use address-mappings instead.
"address" -- the best guess at our external IP address. If we
have no guess, return a 551 error. (Added in 0.1.2.2-alpha)
"fingerprint" -- the contents of the fingerprint file that Tor
writes as a server, or a 551 if we're not a server currently.
(Added in 0.1.2.3-alpha)
"circuit-status"
A series of lines as for a circuit status event. Each line is of
the form:
CircuitID SP CircStatus [SP Path] CRLF
"stream-status"
A series of lines as for a stream status event. Each is of the form:
StreamID SP StreamStatus SP CircID SP Target CRLF
"orconn-status"
A series of lines as for an OR connection status event. Each is of the
form:
ServerID SP ORStatus CRLF
"entry-guards"
A series of lines listing the currently chosen entry guards, if any.
Each is of the form:
ServerID2 SP Status [SP ISOTime] CRLF
Status-with-time = ("unlisted") SP ISOTime
Status = ("up" / "never-connected" / "down" /
"unusable" / "unlisted" )
ServerID2 = Nickname / 40*HEXDIG
[From 0.1.1.4-alpha to 0.1.1.10-alpha, this was called "helper-nodes".
Tor still supports calling it that for now, but support will be
removed in 0.1.3.x.]
[Older versions of Tor (before 0.1.2.x-final) generated 'down' instead
of unlisted/unusable. Current Tors never generate 'down'.]
[XXXX ServerID2 differs from ServerID in not prefixing fingerprints
with a $. This is an implementation error. It would be nice to add
the $ back in if we can do so without breaking compatibility.]
"accounting/enabled"
"accounting/hibernating"
"accounting/bytes"
"accounting/bytes-left"
"accounting/interval-start"
"accounting/interval-wake"
"accounting/interval-end"
Information about accounting status. If accounting is enabled,
"enabled" is 1; otherwise it is 0. The "hibernating" field is "hard"
if we are accepting no data; "soft" if we're accepting no new
connections, and "awake" if we're not hibernating at all. The "bytes"
and "bytes-left" fields contain (read-bytes SP write-bytes), for the
start and the rest of the interval respectively. The 'interval-start'
and 'interval-end' fields are the borders of the current interval; the
'interval-wake' field is the time within the current interval (if any)
where we plan[ned] to start being active.
"config/names"
A series of lines listing the available configuration options. Each is
of the form:
OptionName SP OptionType [ SP Documentation ] CRLF
OptionName = Keyword
OptionType = "Integer" / "TimeInterval" / "DataSize" / "Float" /
"Boolean" / "Time" / "CommaList" / "Dependant" / "Virtual" /
"String" / "LineList"
Documentation = Text
"info/names"
A series of lines listing the available GETINFO options. Each is of
one of these forms:
OptionName SP Documentation CRLF
OptionPrefix SP Documentation CRLF
OptionPrefix = OptionName "/*"
"events/names"
A space-separated list of all the events supported by this version of
Tor's SETEVENTS.
"features/names"
A space-separated list of all the events supported by this version of
Tor's USEFEATURE.
"next-circuit/IP:port"
XXX todo.
"dir/status/authority"
"dir/status/fp/<F>"
"dir/status/fp/<F1>+<F2>+<F3>"
"dir/status/all"
"dir/server/fp/<F>"
"dir/server/fp/<F1>+<F2>+<F3>"
"dir/server/d/<D>"
"dir/server/d/<D1>+<D2>+<D3>"
"dir/server/authority"
"dir/server/all"
A series of lines listing directory contents, provided according to the
specification for the URLs listed in Section 4.4 of dir-spec.txt. Note
that Tor MUST NOT provide private information, such as descriptors for
routers not marked as general-purpose. When asked for 'authority'
information for which this Tor is not authoritative, Tor replies with
an empty string.
"status/circuit-established"
"status/enough-dir-info"
"status/good-server-descriptor"
"status/..."
These provide the current internal Tor values for various Tor
states. See Section 4.1.10 for explanations. (Only a few of the
status events are available as getinfo's currently. Let us know if
you want more exposed.)<
"status/reachability/or"
0 or 1, depending on whether we've found our ORPort reachable.
"status/reachability/dir"
0 or 1, depending on whether we've found our DirPort reachable.
"status/reachability"
"OR=" ("0"/"1") SP "DIR=" ("0"/"1")
Combines status/reachability/*; controllers MUST ignore unrecognized
elements in this entry.
"status/version/recommended" -- List of currently recommended versions
"status/version/current" -- Status of the current version. One of:
new, old, unrecommended, recommended, new in series, obsolete.
"status/version/num-versioning" -- Number of versioning authorities
"status/version/num-concurring" -- Number of versioning authorities
agreeing on the status of the current version
Examples:
C: GETINFO version desc/name/moria1
S: 250+desc/name/moria=
S: [Descriptor for moria]
S: .
S: 250-version=Tor 0.1.1.0-alpha-cvs
S: 250 OK
3.10. EXTENDCIRCUIT
Sent from the client to the server. The format is:
"EXTENDCIRCUIT" SP CircuitID SP
ServerSpec *("," ServerSpec)
[SP "purpose=" Purpose] CRLF
This request takes one of two forms: either the CircuitID is zero, in
which case it is a request for the server to build a new circuit according
to the specified path, or the CircuitID is nonzero, in which case it is a
request for the server to extend an existing circuit with that ID according
to the specified path.
If CircuitID is 0 and "purpose=" is specified, then the circuit's
purpose is set. Two choices are recognized: "general" and
"controller". If not specified, circuits are created as "general".
If the request is successful, the server sends a reply containing a
message body consisting of the CircuitID of the (maybe newly created)
circuit. The syntax is "250" SP "EXTENDED" SP CircuitID CRLF.
3.11. SETCIRCUITPURPOSE
Sent from the client to the server. The format is:
"SETCIRCUITPURPOSE" SP CircuitID SP Purpose CRLF
This changes the circuit's purpose. See EXTENDCIRCUIT above for details.
3.12. SETROUTERPURPOSE
Sent from the client to the server. The format is:
"SETROUTERPURPOSE" SP NicknameOrKey SP Purpose CRLF
This changes the descriptor's purpose. See +POSTDESCRIPTOR below
for details.
NOTE: This command was disabled and made obsolete as of Tor
0.2.0.8-alpha. It doesn't exist anymore, and is listed here only for
historical interest.
3.13. ATTACHSTREAM
Sent from the client to the server. The syntax is:
"ATTACHSTREAM" SP StreamID SP CircuitID [SP "HOP=" HopNum] CRLF
This message informs the server that the specified stream should be
associated with the specified circuit. Each stream may be associated with
at most one circuit, and multiple streams may share the same circuit.
Streams can only be attached to completed circuits (that is, circuits that
have sent a circuit status 'BUILT' event or are listed as built in a
GETINFO circuit-status request).
If the circuit ID is 0, responsibility for attaching the given stream is
returned to Tor.
If HOP=HopNum is specified, Tor will choose the HopNumth hop in the
circuit as the exit node, rather than the last node in the circuit.
Hops are 1-indexed; generally, it is not permitted to attach to hop 1.
Tor responds with "250 OK" if it can attach the stream, 552 if the circuit
or stream didn't exist, or 551 if the stream couldn't be attached for
another reason.
{Implementation note: Tor will close unattached streams by itself,
roughly two minutes after they are born. Let the developers know if
that turns out to be a problem.}
{Implementation note: By default, Tor automatically attaches streams to
circuits itself, unless the configuration variable
"__LeaveStreamsUnattached" is set to "1". Attempting to attach streams
via TC when "__LeaveStreamsUnattached" is false may cause a race between
Tor and the controller, as both attempt to attach streams to circuits.}
{Implementation note: You can try to attachstream to a stream that
has already sent a connect or resolve request but hasn't succeeded
yet, in which case Tor will detach the stream from its current circuit
before proceeding with the new attach request.}
3.14. POSTDESCRIPTOR
Sent from the client to the server. The syntax is:
"+POSTDESCRIPTOR" [SP "purpose=" Purpose] [SP "cache=" Cache]
CRLF Descriptor CRLF "." CRLF
This message informs the server about a new descriptor. If Purpose is
specified, it must be either "general" or "controller", else we
return a 552 error.
If Cache is specified, it must be either "no" or "yes", else we
return a 552 error. If Cache is not specified, Tor will decide for
itself whether it wants to cache the descriptor, and controllers
must not rely on its choice.
The descriptor, when parsed, must contain a number of well-specified
fields, including fields for its nickname and identity.
If there is an error in parsing the descriptor, the server must send a "554
Invalid descriptor" reply. If the descriptor is well-formed but the server
chooses not to add it, it must reply with a 251 message whose body explains
why the server was not added. If the descriptor is added, Tor replies with
"250 OK".
3.15. REDIRECTSTREAM
Sent from the client to the server. The syntax is:
"REDIRECTSTREAM" SP StreamID SP Address [SP Port] CRLF
Tells the server to change the exit address on the specified stream. If
Port is specified, changes the destination port as well. No remapping
is performed on the new provided address.
To be sure that the modified address will be used, this event must be sent
after a new stream event is received, and before attaching this stream to
a circuit.
Tor replies with "250 OK" on success.
3.16. CLOSESTREAM
Sent from the client to the server. The syntax is:
"CLOSESTREAM" SP StreamID SP Reason *(SP Flag) CRLF
Tells the server to close the specified stream. The reason should be one
of the Tor RELAY_END reasons given in tor-spec.txt, as a decimal. Flags is
not used currently; Tor servers SHOULD ignore unrecognized flags. Tor may
hold the stream open for a while to flush any data that is pending.
Tor replies with "250 OK" on success, or a 512 if there aren't enough
arguments, or a 552 if it doesn't recognize the StreamID or reason.
3.17. CLOSECIRCUIT
The syntax is:
CLOSECIRCUIT SP CircuitID *(SP Flag) CRLF
Flag = "IfUnused"
Tells the server to close the specified circuit. If "IfUnused" is
provided, do not close the circuit unless it is unused.
Other flags may be defined in the future; Tor SHOULD ignore unrecognized
flags.
Tor replies with "250 OK" on success, or a 512 if there aren't enough
arguments, or a 552 if it doesn't recognize the CircuitID.
3.18. QUIT
Tells the server to hang up on this controller connection. This command
can be used before authenticating.
3.19. USEFEATURE
The syntax is:
"USEFEATURE" *(SP FeatureName) CRLF
FeatureName = 1*(ALPHA / DIGIT / "_" / "-")
Sometimes extensions to the controller protocol break compatibility with
older controllers. In this case, whenever possible, the extensions are
first included in Tor disabled by default, and only enabled on a given
controller connection when the "USEFEATURE" command is given. Once a
"USEFEATURE" command is given, it applies to all subsequent interactions on
the same connection; to disable an enabled feature, a new controller
connection must be opened.
This is a forward-compatibility mechanism; each feature will eventually
become a regular part of the control protocol in some future version of Tor.
Tor will ignore a request to use any feature that is already on by default.
Tor will give a "552" error if any requested feature is not recognized.
Feature names are case-insensitive.
EXTENDED_EVENTS
Same as passing 'EXTENDED' to SETEVENTS; this is the preferred way to
request the extended event syntax.
This will not be always-enabled until at least XXX (or, at least two
stable releases after XXX, the release where it was first used for
anything.)
VERBOSE_NAMES
Instead of ServerID as specified above, the controller should
identify ORs by LongName in events and GETINFO results. This format is
strictly more informative: rather than including Nickname for
known Named routers and Fingerprint for unknown or unNamed routers, the
LongName format includes a Fingerprint, an indication of Named status,
and a Nickname (if one is known).
This will not be always-enabled until at least 0.1.4.x (or at least two
stable releases after 0.1.2.2-alpha, the release where it was first
available.)
3.20. RESOLVE
The syntax is
"RESOLVE" *Option *Address CRLF
Option = "mode=reverse"
Address = a hostname or IPv4 address
This command launches a remote hostname lookup request for every specified
request (or reverse lookup if "mode=reverse" is specified). Note that the
request is done in the background: to see the answers, your controller will
need to listen for ADDRMAP events; see 4.1.7 below.
[Added in Tor 0.2.0.3-alpha]
3.21. PROTOCOLINFO
The syntax is:
"PROTOCOLINFO" *(SP PIVERSION) CRLF
The server reply format is:
"250-PROTOCOLINFO" SP PIVERSION CRLF *InfoLine "250 OK" CRLF
InfoLine = AuthLine / VersionLine / OtherLine
AuthLine = "250-AUTH" SP "METHODS=" AuthMethod *(",")AuthMethod
*(SP "COOKIEFILE=" AuthCookieFile) CRLF
VersionLine = "250-VERSION" SP "Tor=" TorVersion [SP Arguments] CRLF
AuthMethod =
"NULL" / ; No authentication is required
"HASHEDPASSWORD" / ; A controller must supply the original password
"COOKIE" / ; A controller must supply the contents of a cookie
AuthCookieFile = QuotedString
TorVersion = QuotedString
OtherLine = "250-" Keyword [SP Arguments] CRLF
PIVERSION: 1*DIGIT
Tor MAY give its InfoLines in any order; controllers MUST ignore InfoLines
with keywords they do not recognize. Controllers MUST ignore extraneous
data on any InfoLine.
PIVERSION is there in case we drastically change the syntax one day. For
now it should always be "1". Controllers MAY provide a list of the
protocolinfo versions they support; Tor MAY select a version that the
controller does not support.
AuthMethod is used to specify one or more control authentication
methods that Tor currently accepts.
AuthCookieFile specifies the absolute path and filename of the
authentication cookie that Tor is expecting and is provided iff
the METHODS field contains the method "COOKIE". Controllers MUST handle
escape sequences inside this string.
The VERSION line contains the Tor version.
[Unlike other commands besides AUTHENTICATE, PROTOCOLINFO may be used (but
only once!) before AUTHENTICATE.]
[PROTOCOLINFO was not supported before Tor 0.2.0.5-alpha.]
4. Replies
Reply codes follow the same 3-character format as used by SMTP, with the
first character defining a status, the second character defining a
subsystem, and the third designating fine-grained information.
The TC protocol currently uses the following first characters:
2yz Positive Completion Reply
The command was successful; a new request can be started.
4yz Temporary Negative Completion reply
The command was unsuccessful but might be reattempted later.
5yz Permanent Negative Completion Reply
The command was unsuccessful; the client should not try exactly
that sequence of commands again.
6yz Asynchronous Reply
Sent out-of-order in response to an earlier SETEVENTS command.
The following second characters are used:
x0z Syntax
Sent in response to ill-formed or nonsensical commands.
x1z Protocol
Refers to operations of the Tor Control protocol.
x5z Tor
Refers to actual operations of Tor system.
The following codes are defined:
250 OK
251 Operation was unnecessary
[Tor has declined to perform the operation, but no harm was done.]
451 Resource exhausted
500 Syntax error: protocol
510 Unrecognized command
511 Unimplemented command
512 Syntax error in command argument
513 Unrecognized command argument
514 Authentication required
515 Bad authentication
550 Unspecified Tor error
551 Internal error
[Something went wrong inside Tor, so that the client's
request couldn't be fulfilled.]
552 Unrecognized entity
[A configuration key, a stream ID, circuit ID, event,
mentioned in the command did not actually exist.]
553 Invalid configuration value
[The client tried to set a configuration option to an
incorrect, ill-formed, or impossible value.]
554 Invalid descriptor
555 Unmanaged entity
650 Asynchronous event notification
Unless specified to have specific contents, the human-readable messages
in error replies should not be relied upon to match those in this document.
4.1. Asynchronous events
These replies can be sent after a corresponding SETEVENTS command has been
received. They will not be interleaved with other Reply elements, but they
can appear between a command and its corresponding reply. For example,
this sequence is possible:
C: SETEVENTS CIRC
S: 250 OK
C: GETCONF SOCKSPORT ORPORT
S: 650 CIRC 1000 EXTENDED moria1,moria2
S: 250-SOCKSPORT=9050
S: 250 ORPORT=0
But this sequence is disallowed:
C: SETEVENTS CIRC
S: 250 OK
C: GETCONF SOCKSPORT ORPORT
S: 250-SOCKSPORT=9050
S: 650 CIRC 1000 EXTENDED moria1,moria2
S: 250 ORPORT=0
Clients MUST tolerate more arguments in an asynchonous reply than
expected, and MUST tolerate more lines in an asynchronous reply than
expected. For instance, a client that expects a CIRC message like:
650 CIRC 1000 EXTENDED moria1,moria2
must tolerate:
650-CIRC 1000 EXTENDED moria1,moria2 0xBEEF
650-EXTRAMAGIC=99
650 ANONYMITY=high
If clients ask for extended events, then each event line as specified below
will be followed by additional extensions. Additional lines will be of the
form
"650" ("-"/" ") KEYWORD ["=" ARGUMENTS] CRLF
Additional arguments will be of the form
SP KEYWORD ["=" ( QuotedString / * NonSpDquote ) ]
Such clients MUST tolerate lines with keywords they do not recognize.
4.1.1. Circuit status changed
The syntax is:
"650" SP "CIRC" SP CircuitID SP CircStatus [SP Path]
[SP "REASON=" Reason [SP "REMOTE_REASON=" Reason]] CRLF
CircStatus =
"LAUNCHED" / ; circuit ID assigned to new circuit
"BUILT" / ; all hops finished, can now accept streams
"EXTENDED" / ; one more hop has been completed
"FAILED" / ; circuit closed (was not built)
"CLOSED" ; circuit closed (was built)
Path = ServerID *("," ServerID)
Reason = "NONE" / "TORPROTOCOL" / "INTERNAL" / "REQUESTED" /
"HIBERNATING" / "RESOURCELIMIT" / "CONNECTFAILED" /
"OR_IDENTITY" / "OR_CONN_CLOSED" / "TIMEOUT" /
"FINISHED" / "DESTROYED" / "NOPATH" / "NOSUCHSERVICE"
The path is provided only when the circuit has been extended at least one
hop.
The "REASON" field is provided only for FAILED and CLOSED events, and only
if extended events are enabled (see 3.19). Clients MUST accept reasons
not listed above. Reasons are as given in tor-spec.txt, except for:
NOPATH (Not enough nodes to make circuit)
The "REMOTE_REASON" field is provided only when we receive a DESTROY or
TRUNCATE cell, and only if extended events are enabled. It contains the
actual reason given by the remote OR for closing the circuit. Clients MUST
accept reasons not listed above. Reasons are as listed in tor-spec.txt.
4.1.2. Stream status changed
The syntax is:
"650" SP "STREAM" SP StreamID SP StreamStatus SP CircID SP Target
[SP "REASON=" Reason [ SP "REMOTE_REASON=" Reason ]]
[SP "SOURCE=" Source] [ SP "SOURCE_ADDR=" Address ":" Port ]
CRLF
StreamStatus =
"NEW" / ; New request to connect
"NEWRESOLVE" / ; New request to resolve an address
"REMAP" / ; Address re-mapped to another
"SENTCONNECT" / ; Sent a connect cell along a circuit
"SENTRESOLVE" / ; Sent a resolve cell along a circuit
"SUCCEEDED" / ; Received a reply; stream established
"FAILED" / ; Stream failed and not retriable
"CLOSED" / ; Stream closed
"DETACHED" ; Detached from circuit; still retriable
Target = Address ":" Port
The circuit ID designates which circuit this stream is attached to. If
the stream is unattached, the circuit ID "0" is given.
Reason = "MISC" / "RESOLVEFAILED" / "CONNECTREFUSED" /
"EXITPOLICY" / "DESTROY" / "DONE" / "TIMEOUT" /
"HIBERNATING" / "INTERNAL"/ "RESOURCELIMIT" /
"CONNRESET" / "TORPROTOCOL" / "NOTDIRECTORY" / "END"
The "REASON" field is provided only for FAILED, CLOSED, and DETACHED
events, and only if extended events are enabled (see 3.19). Clients MUST
accept reasons not listed above. Reasons are as given in tor-spec.txt,
except for:
END (We received a RELAY_END cell from the other side of thise
stream.)
[XXXX document more.]
The "REMOTE_REASON" field is provided only when we receive a RELAY_END
cell, and only if extended events are enabled. It contains the actual
reason given by the remote OR for closing the stream. Clients MUST accept
reasons not listed above. Reasons are as listed in tor-spec.txt.
"REMAP" events include a Source if extended events are enabled:
Source = "CACHE" / "EXIT"
Clients MUST accept sources not listed above. "CACHE" is given if
the Tor client decided to remap the address because of a cached
answer, and "EXIT" is given if the remote node we queried gave us
the new address as a response.
The "SOURCE_ADDR" field is included with NEW and NEWRESOLVE events if
extended events are enabled. It indicates the address and port
that requested the connection, and can be (e.g.) used to look up the
requesting program.
4.1.3. OR Connection status changed
The syntax is:
"650" SP "ORCONN" SP (ServerID / Target) SP ORStatus [ SP "REASON="
Reason ] [ SP "NCIRCS=" NumCircuits ] CRLF
ORStatus = "NEW" / "LAUNCHED" / "CONNECTED" / "FAILED" / "CLOSED"
NEW is for incoming connections, and LAUNCHED is for outgoing
connections. CONNECTED means the TLS handshake has finished (in
either direction). FAILED means a connection is being closed that
hasn't finished its handshake, and CLOSED is for connections that
have handshaked.
A ServerID is specified unless it's a NEW connection, in which
case we don't know what server it is yet, so we use Address:Port.
If extended events are enabled (see 3.19), optional reason and
circuit counting information is provided for CLOSED and FAILED
events.
Reason = "MISC" / "DONE" / "CONNECTREFUSED" /
"IDENTITY" / "CONNECTRESET" / "TIMEOUT" / "NOROUTE" /
"IOERROR"
NumCircuits counts both established and pending circuits.
4.1.4. Bandwidth used in the last second
The syntax is:
"650" SP "BW" SP BytesRead SP BytesWritten *(SP Type "=" Num) CRLF
BytesRead = 1*DIGIT
BytesWritten = 1*DIGIT
Type = "DIR" / "OR" / "EXIT" / "APP" / ...
Num = 1*DIGIT
BytesRead and BytesWritten are the totals. In Tor 0.1.x.y-alpha
and later, we also include a breakdown of the connection types
that used bandwidth this second (not implemented yet).
4.1.5. Log messages
The syntax is:
"650" SP Severity SP ReplyText CRLF
or
"650+" Severity CRLF Data 650 SP "OK" CRLF
Severity = "DEBUG" / "INFO" / "NOTICE" / "WARN"/ "ERR"
4.1.6. New descriptors available
Syntax:
"650" SP "NEWDESC" 1*(SP ServerID) CRLF
4.1.7. New Address mapping
Syntax:
"650" SP "ADDRMAP" SP Address SP NewAddress SP Expiry
[SP Error] SP GMTExpiry CRLF
NewAddress = Address / "<error>"
Expiry = DQUOTE ISOTime DQUOTE / "NEVER"
Error = "error=" ErrorCode
ErrorCode = XXXX
GMTExpiry = "EXPIRES=" DQUOTE IsoTime DQUOTE
Error and GMTExpiry are only provided if extended events are enabled.
Expiry is expressed as the local time (rather than GMT). This is a bug,
left in for backward compatibility; new code should look at GMTExpiry
instead.
These events are generated when a new address mapping is entered in the
cache, or when the answer for a RESOLVE command is found.
4.1.8. Descriptors uploaded to us in our role as authoritative dirserver
Syntax:
"650" "+" "AUTHDIR_NEWDESCS" CRLF Action CRLF Message CRLF
Descriptor CRLF "." CRLF "650" SP "OK" CRLF
Action = "ACCEPTED" / "DROPPED" / "REJECTED"
Message = Text
4.1.9. Our descriptor changed
Syntax:
"650" SP "DESCCHANGED" CRLF
[First added in 0.1.2.2-alpha.]
4.1.10. Status events
Status events (STATUS_GENERAL, STATUS_CLIENT, and STATUS_SERVER) are sent
based on occurrences in the Tor process pertaining to the general state of
the program. Generally, they correspond to log messages of severity Notice
or higher. They differ from log messages in that their format is a
specified interface.
Syntax:
"650" SP StatusType SP StatusSeverity SP StatusAction
[SP StatusArguments] CRLF
StatusType = "STATUS_GENERAL" / "STATUS_CLIENT" / "STATUS_SERVER"
StatusSeverity = "NOTICE" / "WARN" / "ERR"
StatusAction = 1*ALPHA
StatusArguments = StatusArgument *(SP StatusArgument)
StatusArgument = StatusKeyword '=' StatusValue
StatusKeyword = 1*(ALNUM / "_")
StatusValue = 1*(ALNUM / '_') / QuotedString
Action is a string, and Arguments is a series of keyword=value
pairs on the same line. Values may be space-terminated strings,
or quoted strings.
These events are always produced with EXTENDED_EVENTS and
VERBOSE_NAMES; see the explanations in the USEFEATURE section
for details.
Controllers MUST tolerate unrecognized actions, MUST tolerate
unrecognized arguments, MUST tolerate missing arguments, and MUST
tolerate arguments that arrive in any order.
Each event description below is accompanied by a recommendation for
controllers. These recommendations are suggestions only; no controller
is required to implement them.
Actions for STATUS_GENERAL events can be as follows:
CLOCK_JUMPED
"TIME=NUM"
Tor spent enough time without CPU cycles that it has closed all
its circuits and will establish them anew. This typically
happens when a laptop goes to sleep and then wakes up again. It
also happens when the system is swapping so heavily that Tor is
starving. The "time" argument specifies the number of seconds Tor
thinks it was unconscious for (or alternatively, the number of
seconds it went back in time).
This status event is sent as NOTICE severity normally, but WARN
severity if Tor is acting as a server currently.
{Recommendation for controller: ignore it, since we don't really
know what the user should do anyway. Hm.}
DANGEROUS_VERSION
"CURRENT=version"
"REASON=NEW/OLD/UNRECOMMENDED"
"RECOMMENDED=\"version, version, ...\""
Tor has found that directory servers don't recommend its version of
the Tor software. RECOMMENDED is a comma-and-space-separated string
of Tor versions that are recommended. REASON is NEW if this version
of Tor is newer than any recommended version, OLD if this version of
Tor is older than any recommended version, and UNRECOMMENDED if
some recommended versions of Tor are newer and some are old than this
version.
{Controllers may want to suggest that the user upgrade OLD or
UNRECOMMENDED versions. NEW versions may be known-insecure, or may
simply be development versions.}
TOO_MANY_CONNECTIONS
"CURRENT=NUM"
Tor has reached its ulimit -n or whatever the native limit is on file
descriptors or sockets. CURRENT is the number of sockets Tor
currently has open. The user should really do something about
this. The "current" argument shows the number of connections currently
open.
{Controllers may recommend that the user increase the limit, or
increase it for them. Recommendations should be phrased in an
OS-appropriate way and automated when possible.}
BUG
"REASON=STRING"
Tor has encountered a situation that its developers never expected,
and the developers would like to learn that it happened. Perhaps
the controller can explain this to the user and encourage her to
file a bug report?
{Controllers should log bugs, but shouldn't annoy the user in case a
bug appears frequently.}
CLOCK_SKEW
SKEW="+" / "-" SECONDS
MIN_SKEW="+" / "-" SECONDS.
SOURCE="DIRSERV:IP:Port" / "NETWORKSTATUS:IP:PORT" / "CONSENSUS"
If "SKEW" is present, it's an estimate of how far we are from the
time declared in the source. (In other words, if we're an hour in
the past, the value is -3600.) "MIN_SKEW" is present, it's a lower
bound. If the source is a DIRSERV, we got the current time from a
connection to a dirserver. If the source is a NETWORKSTATUS, we
decided we're skewed because we got a v2 networkstatus from far in
the future. If the source is CONSENSUS, we decided we're skewed
because we got a networkstatus consensus from the future.
{Controllers may want to warn the user if the skew is high, or if
multiple skew messages appear at severity WARN. Controllers
shouldn't blindly adjust the clock, since the more accurate source
of skew info (DIRSERV) is currently unauthenticated.}
BAD_LIBEVENT
"METHOD=" libevent method
"VERSION=" libevent version
"BADNESS=" "BROKEN" / "BUGGY" / "SLOW"
"RECOVERED=" "NO" / "YES"
Tor knows about bugs in using the configured event method in this
version of libevent. "BROKEN" libevents won't work at all;
"BUGGY" libevents might work okay; "SLOW" libevents will work
fine, but not quickly. If "RECOVERED" is YES, Tor managed to
switch to a more reliable (but probably slower!) libevent method.
{Controllers may want to warn the user if this event occurs, though
generally it's the fault of whoever built the Tor binary and there's
not much the user can do besides upgrade libevent or upgrade the
binary.}
DIR_ALL_UNREACHABLE
Tor believes that none of the known directory servers are
reachable -- this is most likely because the local network is
down or otherwise not working, and might help to explain for the
user why Tor appears to be broken.
{Controllers may want to warn the user if this event occurs; further
action is generally not possible.}
Actions for STATUS_CLIENT events can be as follows:
ENOUGH_DIR_INFO
Tor now knows enough network-status documents and enough server
descriptors that it's going to start trying to build circuits now.
{Controllers may want to use this event to decide when to indicate
progress to their users, but should not interrupt the user's browsing
to tell them so.}
NOT_ENOUGH_DIR_INFO
We discarded expired statuses and router descriptors to fall
below the desired threshold of directory information. We won't
try to build any circuits until ENOUGH_DIR_INFO occurs again.
{Controllers may want to use this event to decide when to indicate
progress to their users, but should not interrupt the user's browsing
to tell them so.}
CIRCUIT_ESTABLISHED
Tor is able to establish circuits for client use. This event will
only be sent if we just built a circuit that changed our mind --
that is, prior to this event we didn't know whether we could
establish circuits.
{Suggested use: controllers can notify their users that Tor is
ready for use as a client once they see this status event. [Perhaps
controllers should also have a timeout if too much time passes and
this event hasn't arrived, to give tips on how to troubleshoot.
On the other hand, hopefully Tor will send further status events
if it can identify the problem.]}
CIRCUIT_NOT_ESTABLISHED
"REASON=" "EXTERNAL_ADDRESS" / "DIR_ALL_UNREACHABLE" / "CLOCK_JUMPED"
We are no longer confident that we can build circuits. The "reason"
keyword provides an explanation: which other status event type caused
our lack of confidence.
{Controllers may want to use this event to decide when to indicate
progress to their users, but should not interrupt the user's browsing
to do so.}
[Note: only REASON=CLOCK_JUMPED is implemented currently.]
DANGEROUS_SOCKS
"PROTOCOL=SOCKS4/SOCKS5"
"ADDRESS=IP:port"
A connection was made to Tor's SOCKS port using one of the SOCKS
approaches that doesn't support hostnames -- only raw IP addresses.
If the client application got this address from gethostbyname(),
it may be leaking target addresses via DNS.
{Controllers should warn their users when this occurs, unless they
happen to know that the application using Tor is in fact doing so
correctly (e.g., because it is part of a distributed bundle).}
SOCKS_UNKNOWN_PROTOCOL
"DATA=string"
A connection was made to Tor's SOCKS port that tried to use it
for something other than the SOCKS protocol. Perhaps the user is
using Tor as an HTTP proxy? The DATA is the first few characters
sent to Tor on the SOCKS port.
{Controllers may want to warn their users when this occurs: it
indicates a misconfigured application.}
SOCKS_BAD_HOSTNAME
"HOSTNAME=QuotedString"
Some application gave us a funny-looking hostname. Perhaps
it is broken? In any case it won't work with Tor and the user
should know.
{Controllers may want to warn their users when this occurs: it
usually indicates a misconfigured application.}
Actions for STATUS_SERVER can be as follows:
EXTERNAL_ADDRESS
"ADDRESS=IP"
"HOSTNAME=NAME"
"METHOD=CONFIGURED/DIRSERV/RESOLVED/INTERFACE/GETHOSTNAME"
Our best idea for our externally visible IP has changed to 'IP'.
If 'HOSTNAME' is present, we got the new IP by resolving 'NAME'. If the
method is 'CONFIGURED', the IP was given verbatim as a configuration
option. If the method is 'RESOLVED', we resolved the Address
configuration option to get the IP. If the method is 'GETHOSTNAME',
we resolved our hostname to get the IP. If the method is 'INTERFACE',
we got the address of one of our network interfaces to get the IP. If
the method is 'DIRSERV', a directory server told us a guess for what
our IP might be.
{Controllers may want to record this info and display it to the user.}
CHECKING_REACHABILITY
"ORADDRESS=IP:port"
"DIRADDRESS=IP:port"
We're going to start testing the reachability of our external OR port
or directory port.
{This event could effect the controller's idea of server status, but
the controller should not interrupt the user to tell them so.}
REACHABILITY_SUCCEEDED
"ORADDRESS=IP:port"
"DIRADDRESS=IP:port"
We successfully verified the reachability of our external OR port or
directory port (depending on which of ORADDRESS or DIRADDRESS is
given.)
{This event could effect the controller's idea of server status, but
the controller should not interrupt the user to tell them so.}
GOOD_SERVER_DESCRIPTOR
We successfully uploaded our server descriptor to each of the
directory authorities, with no complaints.
{This event could effect the controller's idea of server status, but
the controller should not interrupt the user to tell them so.}
NAMESERVER_STATUS
"NS=addr"
"STATUS=" "UP" / "DOWN"
"ERR=" message
One of our nameservers has changed status.
// actually notice
{This event could effect the controller's idea of server status, but
the controller should not interrupt the user to tell them so.}
NAMESERVER_ALL_DOWN
All of our nameservers have gone down.
{This is a problem; if it happens often without the nameservers
coming up again, the user needs to configure more or better
nameservers.}
DNS_HIJACKED
Our DNS provider is providing an address when it should be saying
"NOTFOUND"; Tor will treat the address as a synonym for "NOTFOUND".
{This is an annoyance; controllers may want to tell admins that their
DNS provider is not to be trusted.}
DNS_USELESS
Our DNS provider is giving a hijacked address instead of well-known
websites; Tor will not try to be an exit node.
{Controllers could warn the admin if the server is running as an
exit server: the admin needs to configure a good DNS server.
Alternatively, this happens a lot in some restrictive environments
(hotels, universities, coffeeshops) when the user hasn't registered.}
BAD_SERVER_DESCRIPTOR
"DIRAUTH=addr:port"
"REASON=string"
A directory authority rejected our descriptor. Possible reasons
include malformed descriptors, incorrect keys, highly skewed clocks,
and so on.
{Controllers should warn the admin, and try to cope if they can.}
ACCEPTED_SERVER_DESCRIPTOR
"DIRAUTH=addr:port"
A single directory authority accepted our descriptor.
// actually notice
{This event could effect the controller's idea of server status, but
the controller should not interrupt the user to tell them so.}
REACHABILITY_FAILED
"ORADDRESS=IP:port"
"DIRADDRESS=IP:port"
We failed to connect to our external OR port or directory port
successfully.
{This event could effect the controller's idea of server status. The
controller should warn the admin and suggest reasonable steps to take.}
4.1.11. Our set of guard nodes has changed
Syntax:
"650" SP "GUARD" SP Type SP Name SP Status ... CRLF
Type = "ENTRY"
Name = The (possibly verbose) nickname of the guard affected.
Status = "NEW" | "UP" | "DOWN" | "BAD" | "GOOD" | "DROPPED"
[explain states. XXX]
4.1.12. Network status has changed
Syntax:
"650" "+" "NS" CRLF 1*NetworkStatus "." CRLF "650" SP "OK" CRLF
[First added in 0.1.2.3-alpha]
4.1.13. Bandwidth used on an application stream
The syntax is:
"650" SP "STREAM_BW" SP StreamID SP BytesRead SP BytesWritten CRLF
BytesRead = 1*DIGIT
BytesWritten = 1*DIGIT
BytesRead and BytesWritten are the number of bytes read and written since
the last STREAM_BW event on this stream. These events are generated about
once per second per stream; no events are generated for streams that have
not read or written.
These events apply only to streams entering Tor (such as on a SOCKSPort,
TransPort, or so on). They are not generated for exiting streams.
5. Implementation notes
5.1. Authentication
By default, the current Tor implementation trusts all local users.
If the 'CookieAuthentication' option is true, Tor writes a "magic cookie"
file named "control_auth_cookie" into its data directory. To authenticate,
the controller must send the contents of this file, encoded in hexadecimal.
If the 'HashedControlPassword' option is set, it must contain the salted
hash of a secret password. The salted hash is computed according to the
S2K algorithm in RFC 2440 (OpenPGP), and prefixed with the s2k specifier.
This is then encoded in hexadecimal, prefixed by the indicator sequence
"16:". Thus, for example, the password 'foo' could encode to:
16:660537E3E1CD49996044A3BF558097A981F539FEA2F9DA662B4626C1C2
++++++++++++++++**^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
salt hashed value
indicator
You can generate the salt of a password by calling
'tor --hash-password <password>'
or by using the example code in the Python and Java controller libraries.
To authenticate under this scheme, the controller sends Tor the original
secret that was used to generate the password.
5.2. Don't let the buffer get too big.
If you ask for lots of events, and 16MB of them queue up on the buffer,
the Tor process will close the socket.
5.3. Backward compatibility with v0 control protocol.
The 'version 0' control protocol was replaced in Tor 0.1.1.x. Support was
removed in Tor 0.2.0.x. Every non-obsolete version of Tor now supports the
version 1 control protocol.
For backward compatibility with the "version 0" control protocol,
Tor used to check whether the third octet of the first command is zero.
(If it was, Tor assumed that version 0 is in use.)
This compatibility was removed in Tor 0.1.2.16 and 0.2.0.4-alpha.
5.4. Options for use by controllers
Tor provides a few special configuration options for use by controllers.
These options can be set and examined by the SETCONF and GETCONF commands,
but are not saved to disk by SAVECONF.
Generally, these options make Tor unusable by disabling a portion of Tor's
normal operations. Unless a controller provides replacement functionality
to fill this gap, Tor will not correctly handle user requests.
__AllDirOptionsPrivate
If true, Tor will try to launch all directory operations through
anonymous connections. (Ordinarily, Tor only tries to anonymize
requests related to hidden services.) This option will slow down
directory access, and may stop Tor from working entirely if it does not
yet have enough directory information to build circuits.
(Boolean. Default: "0".)
__DisablePredictedCircuits
If true, Tor will not launch preemptive "general purpose" circuits for
streams to attach to. (It will still launch circuits for testing and
for hidden services.)
(Boolean. Default: "0".)
__LeaveStreamsUnattached
If true, Tor will not automatically attach new streams to circuits;
instead, the controller must attach them with ATTACHSTREAM. If the
controller does not attach the streams, their data will never be routed.
(Boolean. Default: "0".)
Reference in New Issue View Git Blame Copy Permalink