nihilist/tor
1
0
Fork 0
mirror of https://gitlab.torproject.org/tpo/core/tor.git synced 2024-11-24 20:33:31 +01:00
Code Issues Packages Projects Releases Wiki Activity
9f1618b518
tor/doc/spec/rend-spec.txt
Sebastian Hahn d230827912 Remove all svn metadata minus what I missed. 
Tor doesn't use SVN anymore, making $Revision$, $Id$ and $Date$
meaningless. Remove them without replacement.
2009-05-05 17:05:46 +02:00

752 lines
34 KiB
Plaintext
Raw Blame History

Tor Rendezvous Specification
0. Overview and preliminaries
Read
https://www.torproject.org/doc/design-paper/tor-design.html#sec:rendezvous
before you read this specification. It will make more sense.
Rendezvous points provide location-hidden services (server
anonymity) for the onion routing network. With rendezvous points,
Bob can offer a TCP service (say, a webserver) via the onion
routing network, without revealing the IP of that service.
Bob does this by anonymously advertising a public key for his
service, along with a list of onion routers to act as "Introduction
Points" for his service. He creates forward circuits to those
introduction points, and tells them about his public key. To
connect to Bob, Alice first builds a circuit to an OR to act as
her "Rendezvous Point." She then connects to one of Bob's chosen
introduction points, optionally provides authentication or
authorization information, and asks it to tell him about her Rendezvous
Point (RP). If Bob chooses to answer, he builds a circuit to her
RP, and tells it to connect him to Alice. The RP joins their
circuits together, and begins relaying cells. Alice's 'BEGIN'
cells are received directly by Bob's OP, which passes data to
and from the local server implementing Bob's service.
Below we describe a network-level specification of this service,
along with interfaces to make this process transparent to Alice
(so long as she is using an OP).
0.1. Notation, conventions and prerequisites
In the specifications below, we use the same notation and terminology
as in "tor-spec.txt". The service specified here also requires the
existence of an onion routing network as specified in that file.
H(x) is a SHA1 digest of x.
PKSign(SK,x) is a PKCS.1-padded RSA signature of x with SK.
PKEncrypt(SK,x) is a PKCS.1-padded RSA encryption of x with SK.
Public keys are all RSA, and encoded in ASN.1.
All integers are stored in network (big-endian) order.
All symmetric encryption uses AES in counter mode, except where
otherwise noted.
In all discussions, "Alice" will refer to a user connecting to a
location-hidden service, and "Bob" will refer to a user running a
location-hidden service.
An OP is (as defined elsewhere) an "Onion Proxy" or Tor client.
An OR is (as defined elsewhere) an "Onion Router" or Tor server.
An "Introduction point" is a Tor server chosen to be Bob's medium-term
'meeting place'. A "Rendezvous point" is a Tor server chosen by Alice to
be a short-term communication relay between her and Bob. All Tor servers
potentially act as introduction and rendezvous points.
0.2. Protocol outline
1. Bob->Bob's OP: "Offer IP:Port as
public-key-name:Port". [configuration]
(We do not specify this step; it is left to the implementor of
Bob's OP.)
2. Bob's OP generates keypair and rendezvous service descriptor:
"Meet public-key X at introduction point A, B, or C." (signed)
3. Bob's OP->Introduction point via Tor: [introduction setup]
"This pk is me."
4. Bob's OP->directory service via Tor: publishes Bob's service
descriptor [advertisement]
5. Out of band, Alice receives a [x.y.]z.onion:port address.
She opens a SOCKS connection to her OP, and requests
x.y.z.onion:port.
6. Alice's OP retrieves Bob's descriptor via Tor. [descriptor lookup.]
7. Alice's OP chooses a rendezvous point, opens a circuit to that
rendezvous point, and establishes a rendezvous circuit. [rendezvous
setup.]
8. Alice connects to the Introduction point via Tor, and tells it about
her rendezvous point and optional authentication/authorization
information. (Encrypted to Bob.) [Introduction 1]
9. The Introduction point passes this on to Bob's OP via Tor, along the
introduction circuit. [Introduction 2]
10. Bob's OP decides whether to connect to Alice, and if so, creates a
circuit to Alice's RP via Tor. Establishes a shared circuit.
[Rendezvous.]
11. Alice's OP sends begin cells to Bob's OP. [Connection]
0.3. Constants and new cell types
Relay cell types
32 -- RELAY_ESTABLISH_INTRO
33 -- RELAY_ESTABLISH_RENDEZVOUS
34 -- RELAY_INTRODUCE1
35 -- RELAY_INTRODUCE2
36 -- RELAY_RENDEZVOUS1
37 -- RELAY_RENDEZVOUS2
38 -- RELAY_INTRO_ESTABLISHED
39 -- RELAY_RENDEZVOUS_ESTABLISHED
40 -- RELAY_COMMAND_INTRODUCE_ACK
0.4. Version overview
There are several parts in the hidden service protocol that have
changed over time, each of them having its own version number, whereas
other parts remained the same. The following list of potentially
versioned protocol parts should help reduce some confusion:
- Hidden service descriptor: the binary-based v0 was the default for
a long time, and an ascii-based v2 has been added by proposal
114. See 1.2.
- Hidden service descriptor propagation mechanism: currently related to
the hidden service descriptor version -- v0 publishes to the original
hs directory authorities, whereas v2 publishes to a rotating subset
of relays with the "hsdir" flag; see 1.4 and 1.6.
- Introduction protocol for how to generate an introduction cell:
v0 specified a nickname for the rendezvous point and assumed the
relay would know about it, whereas v2 now specifies IP address,
port, and onion key so the relay doesn't need to already recognize
it. See 1.8.
1. The Protocol
1.1. Bob configures his local OP.
We do not specify a format for the OP configuration file. However,
OPs SHOULD allow Bob to provide more than one advertised service
per OP, and MUST allow Bob to specify one or more virtual ports per
service. Bob provides a mapping from each of these virtual ports
to a local IP:Port pair.
1.2. Bob's OP generates service descriptors.
The first time the OP provides an advertised service, it generates
a public/private keypair (stored locally).
Beginning with 0.2.0.10-alpha, Bob's OP encodes "V2" descriptors. The
format of a "V2" descriptor is as follows:
"rendezvous-service-descriptor" descriptor-id NL
[At start, exactly once]
Indicates the beginning of the descriptor. "descriptor-id" is a
periodically changing identifier of 160 bits formatted as 32 base32
chars that is calculated by the hidden service and its clients. If
the optional "descriptor-cookie" is used, this "descriptor-id"
cannot be computed by anyone else. (Everyone can verify that this
"descriptor-id" belongs to the rest of the descriptor, even without
knowing the optional "descriptor-cookie", as described below.) The
"descriptor-id" is calculated by performing the following operation:
descriptor-id =
H(permanent-id | H(time-period | descriptor-cookie | replica))
"permanent-id" is the permanent identifier of the hidden service,
consisting of 80 bits. It can be calculated by computing the hash value
of the public hidden service key and truncating after the first 80 bits:
permanent-id = H(public-key)[:10]
"H(time-period | descriptor-cookie | replica)" is the (possibly
secret) id part that is
necessary to verify that the hidden service is the true originator
of this descriptor. It can only be created by the hidden service
and its clients, but the "signature" below can only be created by
the service.
"descriptor-cookie" is an optional secret password of 128 bits that
is shared between the hidden service provider and its clients.
"replica" denotes the number of the non-consecutive replica.
(Each descriptor is replicated on a number of _consecutive_ nodes
in the identifier ring by making every storing node responsible
for the identifier intervals starting from its 3rd predecessor's
ID to its own ID. In addition to that, every service publishes
multiple descriptors with different descriptor IDs in order to
distribute them to different places on the ring. Therefore,
"replica" chooses one of the _non-consecutive_ replicas. -KL)
The "time-period" changes periodically depending on the global time and
as a function of "permanent-id". The current value for "time-period" can
be calculated using the following formula:
time-period = (current-time + permanent-id-byte * 86400 / 256)
/ 86400
"current-time" contains the current system time in seconds since
1970-01-01 00:00, e.g. 1188241957. "permanent-id-byte" is the first
(unsigned) byte of the permanent identifier (which is in network
order), e.g. 143. Adding the product of "permanent-id-byte" and
86400 (seconds per day), divided by 256, prevents "time-period" from
changing for all descriptors at the same time of the day. The result
of the overall operation is a (network-ordered) 32-bit integer, e.g.
13753 or 0x000035B9 with the example values given above.
"version" version-number NL
[Exactly once]
The version number of this descriptor's format. In this case: 2.
"permanent-key" NL a public key in PEM format
[Exactly once]
The public key of the hidden service which is required to verify the
"descriptor-id" and the "signature".
"secret-id-part" secret-id-part NL
[Exactly once]
The result of the following operation as explained above, formatted as
32 base32 chars. Using this secret id part, everyone can verify that
the signed descriptor belongs to "descriptor-id".
secret-id-part = H(time-period | descriptor-cookie | replica)
"publication-time" YYYY-MM-DD HH:MM:SS NL
[Exactly once]
A timestamp when this descriptor has been created.
"protocol-versions" version-string NL
[Exactly once]
A comma-separated list of recognized and permitted version numbers
for use in INTRODUCE cells; these versions are described in section
1.8 below.
"introduction-points" NL encrypted-string
[At most once]
A list of introduction points. If the optional "descriptor-cookie" is
used, this list is encrypted with AES in CTR mode with a random
initialization vector of 128 bits that is written to
the beginning of the encrypted string, and the "descriptor-cookie" as
secret key of 128 bits length.
The string containing the introduction point data (either encrypted
or not) is encoded in base64, and surrounded with
"-----BEGIN MESSAGE-----" and "-----END MESSAGE-----".
The unencrypted string may begin with:
["service-authentication" auth-type NL auth-data ... reserved]
[At start, any number]
The service-specific authentication data can be used to perform
client authentication. This data is independent of the selected
introduction point as opposed to "intro-authentication" below.
Subsequently, an arbitrary number of introduction point entries may
follow, each containing the following data:
"introduction-point" identifier NL
[At start, exactly once]
The identifier of this introduction point: the base-32 encoded
hash of this introduction point's identity key.
"ip-address" ip-address NL
[Exactly once]
The IP address of this introduction point.
"onion-port" port NL
[Exactly once]
The TCP port on which the introduction point is listening for
incoming onion requests.
"onion-key" NL a public key in PEM format
[Exactly once]
The public key that can be used to encrypt messages to this
introduction point.
"service-key" NL a public key in PEM format
[Exactly once]
The public key that can be used to encrypt messages to the hidden
service.
["intro-authentication" auth-type NL auth-data ... reserved]
[Any number]
The introduction-point-specific authentication data can be used
to perform client authentication. This data depends on the
selected introduction point as opposed to "service-authentication"
above.
(This ends the fields in the encrypted portion of the descriptor.)
[It's ok for Bob to advertise 0 introduction points. He might want
to do that if he previously advertised some introduction points,
and now he doesn't have any. -RD]
"signature" NL signature-string
[At end, exactly once]
A signature of all fields above with the private key of the hidden
service.
1.2.1. Other descriptor formats we don't use.
Support for the V0 descriptor format was dropped in 0.2.2.0-alpha-dev:
KL Key length [2 octets]
PK Bob's public key [KL octets]
TS A timestamp [4 octets]
NI Number of introduction points [2 octets]
Ipt A list of NUL-terminated ORs [variable]
SIG Signature of above fields [variable]
KL is the length of PK, in octets.
TS is the number of seconds elapsed since Jan 1, 1970.
The members of Ipt may be either (a) nicknames, or (b) identity key
digests, encoded in hex, and prefixed with a '$'.
The V1 descriptor format was understood and accepted from
0.1.1.5-alpha-cvs to 0.2.0.6-alpha-dev, but no Tors generated it and
it was removed:
V Format byte: set to 255 [1 octet]
V Version byte: set to 1 [1 octet]
KL Key length [2 octets]
PK Bob's public key [KL octets]
TS A timestamp [4 octets]
PROTO Protocol versions: bitmask [2 octets]
NI Number of introduction points [2 octets]
For each introduction point: (as in INTRODUCE2 cells)
IP Introduction point's address [4 octets]
PORT Introduction point's OR port [2 octets]
ID Introduction point identity ID [20 octets]
KLEN Length of onion key [2 octets]
KEY Introduction point onion key [KLEN octets]
SIG Signature of above fields [variable]
A hypothetical "V1" descriptor, that has never been used but might
be useful for historical reasons, contains:
V Format byte: set to 255 [1 octet]
V Version byte: set to 1 [1 octet]
KL Key length [2 octets]
PK Bob's public key [KL octets]
TS A timestamp [4 octets]
PROTO Rendezvous protocol versions: bitmask [2 octets]
NA Number of auth mechanisms accepted [1 octet]
For each auth mechanism:
AUTHT The auth type that is supported [2 octets]
AUTHL Length of auth data [1 octet]
AUTHD Auth data [variable]
NI Number of introduction points [2 octets]
For each introduction point: (as in INTRODUCE2 cells)
ATYPE An address type (typically 4) [1 octet]
ADDR Introduction point's IP address [4 or 16 octets]
PORT Introduction point's OR port [2 octets]
AUTHT The auth type that is supported [2 octets]
AUTHL Length of auth data [1 octet]
AUTHD Auth data [variable]
ID Introduction point identity ID [20 octets]
KLEN Length of onion key [2 octets]
KEY Introduction point onion key [KLEN octets]
SIG Signature of above fields [variable]
AUTHT specifies which authentication/authorization mechanism is
required by the hidden service or the introduction point. AUTHD
is arbitrary data that can be associated with an auth approach.
Currently only AUTHT of [00 00] is supported, with an AUTHL of 0.
See section 2 of this document for details on auth mechanisms.
1.3. Bob's OP establishes his introduction points.
The OP establishes a new introduction circuit to each introduction
point. These circuits MUST NOT be used for anything but hidden service
introduction. To establish the introduction, Bob sends a
RELAY_ESTABLISH_INTRO cell, containing:
KL Key length [2 octets]
PK Introduction public key [KL octets]
HS Hash of session info [20 octets]
SIG Signature of above information [variable]
[XXX011, need to add auth information here. -RD]
To prevent replay attacks, the HS field contains a SHA-1 hash based on the
shared secret KH between Bob's OP and the introduction point, as
follows:
HS = H(KH | "INTRODUCE")
That is:
HS = H(KH | [49 4E 54 52 4F 44 55 43 45])
(KH, as specified in tor-spec.txt, is H(g^xy | [00]) .)
Upon receiving such a cell, the OR first checks that the signature is
correct with the included public key. If so, it checks whether HS is
correct given the shared state between Bob's OP and the OR. If either
check fails, the OP discards the cell; otherwise, it associates the
circuit with Bob's public key, and dissociates any other circuits
currently associated with PK. On success, the OR sends Bob a
RELAY_INTRO_ESTABLISHED cell with an empty payload.
Bob's OP does not include its own public key in the RELAY_ESTABLISH_INTRO
cell, but the public key of a freshly generated introduction key pair.
The OP also includes these fresh public keys in the v2 hidden service
descriptor together with the other introduction point information. The
reason is that the introduction point does not need to and therefore
should not know for which hidden service it works, so as to prevent it
from tracking the hidden service's activity.
1.4. Bob's OP advertises his service descriptor(s).
Bob's OP opens a stream to each directory server's directory port via Tor.
(He may re-use old circuits for this.) Over this stream, Bob's OP makes
an HTTP 'POST' request, to a URL "/tor/rendezvous/publish" relative to the
directory server's root, containing as its body Bob's service descriptor.
Bob should upload a service descriptor for each version format that
is supported in the current Tor network.
Upon receiving a descriptor, the directory server checks the signature,
and discards the descriptor if the signature does not match the enclosed
public key. Next, the directory server checks the timestamp. If the
timestamp is more than 24 hours in the past or more than 1 hour in the
future, or the directory server already has a newer descriptor with the
same public key, the server discards the descriptor. Otherwise, the
server discards any older descriptors with the same public key and
version format, and associates the new descriptor with the public key.
The directory server remembers this descriptor for at least 24 hours
after its timestamp. At least every 18 hours, Bob's OP uploads a
fresh descriptor.
Bob's OP publishes v2 descriptors to a changing subset of all v2 hidden
service directories. Therefore, Bob's OP opens a stream via Tor to each
responsible hidden service directory. (He may re-use old circuits
for this.) Over this stream, Bob's OP makes an HTTP 'POST' request to a
URL "/tor/rendezvous2/publish" relative to the hidden service
directory's root, containing as its body Bob's service descriptor.
At any time, there are 6 hidden service directories responsible for
keeping replicas of a descriptor; they consist of 2 sets of 3 hidden
service directories with consecutive onion IDs. Bob's OP learns about
the complete list of hidden service directories by filtering the
consensus status document received from the directory authorities. A
hidden service directory is deemed responsible for all descriptor IDs in
the interval from its direct predecessor, exclusive, to its own ID,
inclusive; it further holds replicas for its 2 predecessors. A
participant only trusts its own routing list and never learns about
routing information from other parties.
Bob's OP publishes a new v2 descriptor once an hour or whenever its
content changes. V2 descriptors can be found by clients within a given
time period of 24 hours, after which they change their ID as described
under 1.2. If a published descriptor would be valid for less than 60
minutes (= 2 x 30 minutes to allow the server to be 30 minutes behind
and the client 30 minutes ahead), Bob's OP publishes the descriptor
under the ID of both, the current and the next publication period.
1.5. Alice receives a x.y.z.onion address.
When Alice receives a pointer to a location-hidden service, it is as a
hostname of the form "z.onion" or "y.z.onion" or "x.y.z.onion", where
z is a base-32 encoding of a 10-octet hash of Bob's service's public
key, computed as follows:
1. Let H = H(PK).
2. Let H' = the first 80 bits of H, considering each octet from
most significant bit to least significant bit.
2. Generate a 16-character encoding of H', using base32 as defined
in RFC 3548.
(We only use 80 bits instead of the 160 bits from SHA1 because we
don't need to worry about arbitrary collisions, and because it will
make handling the url's more convenient.)
The string "x", if present, is the base-32 encoding of the
authentication/authorization required by the introduction point.
The string "y", if present, is the base-32 encoding of the
authentication/authorization required by the hidden service.
Omitting a string is taken to mean auth type [00 00].
See section 2 of this document for details on auth mechanisms.
[Yes, numbers are allowed at the beginning. See RFC 1123. -NM]
1.6. Alice's OP retrieves a service descriptor.
Similarly to the description in section 1.4, Alice's OP fetches a v2
descriptor from a randomly chosen hidden service directory out of the
changing subset of 6 nodes. If the request is unsuccessful, Alice retries
the other remaining responsible hidden service directories in a random
order. Alice relies on Bob to care about a potential clock skew between
the two by possibly storing two sets of descriptors (see end of section
1.4).
Alice's OP opens a stream via Tor to the chosen v2 hidden service
directory. (She may re-use old circuits for this.) Over this stream,
Alice's OP makes an HTTP 'GET' request for the document
"/tor/rendezvous2/<z>", where z is replaced with the encoding of the
descriptor ID. The directory replies with a 404 HTTP response if it does
not recognize <z>, and otherwise returns Bob's most recently uploaded
service descriptor.
If Alice's OP receives a 404 response, it tries the other directory
servers, and only fails the lookup if none recognize the public key hash.
Upon receiving a service descriptor, Alice verifies with the same process
as the directory server uses, described above in section 1.4.
The directory server gives a 400 response if it cannot understand Alice's
request.
Alice should cache the descriptor locally, but should not use
descriptors that are more than 24 hours older than their timestamp.
[Caching may make her partitionable, but she fetched it anonymously,
and we can't very well *not* cache it. -RD]
1.7. Alice's OP establishes a rendezvous point.
When Alice requests a connection to a given location-hidden service,
and Alice's OP does not have an established circuit to that service,
the OP builds a rendezvous circuit. It does this by establishing
a circuit to a randomly chosen OR, and sending a
RELAY_ESTABLISH_RENDEZVOUS cell to that OR. The body of that cell
contains:
RC Rendezvous cookie [20 octets]
[XXX011 this looks like an auth mechanism. should we generalize here? -RD]
The rendezvous cookie is an arbitrary 20-byte value, chosen randomly by
Alice's OP.
Upon receiving a RELAY_ESTABLISH_RENDEZVOUS cell, the OR associates the
RC with the circuit that sent it. It replies to Alice with an empty
RELAY_RENDEZVOUS_ESTABLISHED cell to indicate success.
Alice's OP MUST NOT use the circuit which sent the cell for any purpose
other than rendezvous with the given location-hidden service.
1.8. Introduction: from Alice's OP to Introduction Point
Alice builds a separate circuit to one of Bob's chosen introduction
points, and sends it a RELAY_INTRODUCE1 cell containing:
Cleartext
PK_ID Identifier for Bob's PK [20 octets]
Encrypted to Bob's PK: (in the v0 intro protocol)
RP Rendezvous point's nickname [20 octets]
RC Rendezvous cookie [20 octets]
g^x Diffie-Hellman data, part 1 [128 octets]
OR (in the v1 intro protocol)
VER Version byte: set to 1. [1 octet]
RP Rendezvous point nick or ID [42 octets]
RC Rendezvous cookie [20 octets]
g^x Diffie-Hellman data, part 1 [128 octets]
OR (in the v2 intro protocol)
VER Version byte: set to 2. [1 octet]
IP Rendezvous point's address [4 octets]
PORT Rendezvous point's OR port [2 octets]
ID Rendezvous point identity ID [20 octets]
KLEN Length of onion key [2 octets]
KEY Rendezvous point onion key [KLEN octets]
RC Rendezvous cookie [20 octets]
g^x Diffie-Hellman data, part 1 [128 octets]
PK_ID is the hash of Bob's public key. RP is NUL-padded and
terminated. In version 0, it must contain a nickname. In version 1,
it must contain EITHER a nickname or an identity key digest that is
encoded in hex and prefixed with a '$'.
The hybrid encryption to Bob's PK works just like the hybrid
encryption in CREATE cells (see tor-spec). Thus the payload of the
version 0 RELAY_INTRODUCE1 cell on the wire will contain
20+42+16+20+20+128=246 bytes, and the version 1 and version 2
introduction formats have other sizes.
Through Tor 0.2.0.6-alpha, clients only generated the v0 introduction
format, whereas hidden services have understood and accepted v0,
v1, and v2 since 0.1.1.x. As of Tor 0.2.0.7-alpha and 0.1.2.18,
clients switched to using the v2 intro format.
If Alice has downloaded a v2 descriptor, she uses the contained public
key ("service-key") instead of Bob's public key to create the
RELAY_INTRODUCE1 cell as described above.
1.8.1. Other introduction formats we don't use.
We briefly speculated about using the following format for the
"encrypted to Bob's PK" part of the introduction, but no Tors have
ever generated these.
VER Version byte: set to 3. [1 octet]
ATYPE An address type (typically 4) [1 octet]
ADDR Rendezvous point's IP address [4 or 16 octets]
PORT Rendezvous point's OR port [2 octets]
AUTHT The auth type that is supported [2 octets]
AUTHL Length of auth data [1 octet]
AUTHD Auth data [variable]
ID Rendezvous point identity ID [20 octets]
KLEN Length of onion key [2 octets]
KEY Rendezvous point onion key [KLEN octets]
RC Rendezvous cookie [20 octets]
g^x Diffie-Hellman data, part 1 [128 octets]
1.9. Introduction: From the Introduction Point to Bob's OP
If the Introduction Point recognizes PK_ID as a public key which has
established a circuit for introductions as in 1.3 above, it sends the body
of the cell in a new RELAY_INTRODUCE2 cell down the corresponding circuit.
(If the PK_ID is unrecognized, the RELAY_INTRODUCE1 cell is discarded.)
After sending the RELAY_INTRODUCE2 cell, the OR replies to Alice with an
empty RELAY_COMMAND_INTRODUCE_ACK cell. If no RELAY_INTRODUCE2 cell can
be sent, the OR replies to Alice with a non-empty cell to indicate an
error. (The semantics of the cell body may be determined later; the
current implementation sends a single '1' byte on failure.)
When Bob's OP receives the RELAY_INTRODUCE2 cell, it decrypts it with
the private key for the corresponding hidden service, and extracts the
rendezvous point's nickname, the rendezvous cookie, and the value of g^x
chosen by Alice.
1.10. Rendezvous
Bob's OP builds a new Tor circuit ending at Alice's chosen rendezvous
point, and sends a RELAY_RENDEZVOUS1 cell along this circuit, containing:
RC Rendezvous cookie [20 octets]
g^y Diffie-Hellman [128 octets]
KH Handshake digest [20 octets]
(Bob's OP MUST NOT use this circuit for any other purpose.)
If the RP recognizes RC, it relays the rest of the cell down the
corresponding circuit in a RELAY_RENDEZVOUS2 cell, containing:
g^y Diffie-Hellman [128 octets]
KH Handshake digest [20 octets]
(If the RP does not recognize the RC, it discards the cell and
tears down the circuit.)
When Alice's OP receives a RELAY_RENDEZVOUS2 cell on a circuit which
has sent a RELAY_ESTABLISH_RENDEZVOUS cell but which has not yet received
a reply, it uses g^y and H(g^xy) to complete the handshake as in the Tor
circuit extend process: they establish a 60-octet string as
K = SHA1(g^xy | [00]) | SHA1(g^xy | [01]) | SHA1(g^xy | [02])
and generate
KH = K[0..15]
Kf = K[16..31]
Kb = K[32..47]
Subsequently, the rendezvous point passes relay cells, unchanged, from
each of the two circuits to the other. When Alice's OP sends
RELAY cells along the circuit, it first encrypts them with the
Kf, then with all of the keys for the ORs in Alice's side of the circuit;
and when Alice's OP receives RELAY cells from the circuit, it decrypts
them with the keys for the ORs in Alice's side of the circuit, then
decrypts them with Kb. Bob's OP does the same, with Kf and Kb
interchanged.
1.11. Creating streams
To open TCP connections to Bob's location-hidden service, Alice's OP sends
a RELAY_BEGIN cell along the established circuit, using the special
address "", and a chosen port. Bob's OP chooses a destination IP and
port, based on the configuration of the service connected to the circuit,
and opens a TCP stream. From then on, Bob's OP treats the stream as an
ordinary exit connection.
[ Except he doesn't include addr in the connected cell or the end
cell. -RD]
Alice MAY send multiple RELAY_BEGIN cells along the circuit, to open
multiple streams to Bob. Alice SHOULD NOT send RELAY_BEGIN cells for any
other address along her circuit to Bob; if she does, Bob MUST reject them.
2. Authentication and authorization.
Foo.
3. Hidden service directory operation
This section has been introduced with the v2 hidden service descriptor
format. It describes all operations of the v2 hidden service descriptor
fetching and propagation mechanism that are required for the protocol
described in section 1 to succeed with v2 hidden service descriptors.
3.1. Configuring as hidden service directory
Every onion router that has its directory port open can decide whether it
wants to store and serve hidden service descriptors. An onion router which
is configured as such includes the "hidden-service-dir" flag in its router
descriptors that it sends to directory authorities.
The directory authorities include a new flag "HSDir" for routers that
decided to provide storage for hidden service descriptors and that
have been running for at least 24 hours.
3.2. Accepting publish requests
Hidden service directory nodes accept publish requests for v2 hidden service
descriptors and store them to their local memory. (It is not necessary to
make descriptors persistent, because after restarting, the onion router
would not be accepted as a storing node anyway, because it has not been
running for at least 24 hours.) All requests and replies are formatted as
HTTP messages. Requests are initiated via BEGIN_DIR cells directed to
the router's directory port, and formatted as HTTP POST requests to the URL
"/tor/rendezvous2/publish" relative to the hidden service directory's root,
containing as its body a v2 service descriptor.
A hidden service directory node parses every received descriptor and only
stores it when it thinks that it is responsible for storing that descriptor
based on its own routing table. See section 1.4 for more information on how
to determine responsibility for a certain descriptor ID.
3.3. Processing fetch requests
Hidden service directory nodes process fetch requests for hidden service
descriptors by looking them up in their local memory. (They do not need to
determine if they are responsible for the passed ID, because it does no harm
if they deliver a descriptor for which they are not (any more) responsible.)
All requests and replies are formatted as HTTP messages. Requests are
initiated via BEGIN_DIR cells directed to the router's directory port,
and formatted as HTTP GET requests for the document "/tor/rendezvous2/<z>",
where z is replaced with the encoding of the descriptor ID.
Reference in New Issue View Git Blame Copy Permalink