Changes in version 0.1.0.8-rc - 2005-05-23 o Bugfixes: - It turns out that kqueue on OS X 10.3.9 was causing kernel panics. Disable kqueue on all OS X Tors. - Fix RPM: remove duplicate line accidentally added to the rpm spec file. - Disable threads on openbsd too, since its gethostaddr is not reentrant either. - Tolerate libevent 0.8 since it still works, even though it's ancient. - Enable building on Red Hat 9.0 again. - Allow the middle hop of the testing circuit to be running any version, now that most of them have the bugfix to let them connect to unknown servers. This will allow reachability testing to work even when 0.0.9.7-0.0.9.9 become obsolete. - Handle relay cells with rh.length too large. This prevents a potential attack that could read arbitrary memory (maybe even keys) from the exit server's process. - We screwed up the dirport reachability testing when we don't yet have a cached version of the directory. Hopefully now fixed. - Clean up router_load_single_router() (used by the controller), so it doesn't seg fault on error. - Fix a minor memory leak when somebody establishes an introduction point at your Tor server. - If a socks connection ends because read fails, don't warn that you're not sending a socks reply back. o Features: - Add HttpProxyAuthenticator config option too, that works like the HttpsProxyAuthenticator config option. - Encode hashed controller passwords in hex instead of base64, to make it easier to write controllers. Changes in version 0.1.0.7-rc - 2005-05-17 o Bugfixes: - Fix a bug in the OS X package installer that prevented it from installing on Tiger. - Fix a script bug in the OS X package installer that made it complain during installation. - Find libevent even if it's hiding in /usr/local/ and your CFLAGS and LDFLAGS don't tell you to look there. - Be able to link with libevent as a shared library (the default after 1.0d), even if it's hiding in /usr/local/lib and even if you haven't added /usr/local/lib to your /etc/ld.so.conf, assuming you're running gcc. Otherwise fail and give a useful error message. - Fix a bug in the RPM packager: set home directory for _tor to something more reasonable when first installing. - Free a minor amount of memory that is still reachable on exit. Changes in version 0.1.0.6-rc - 2005-05-14 o Bugfixes: - Implement --disable-threads configure option. Disable threads on netbsd by default, because it appears to have no reentrant resolver functions. - Apple's OS X 10.4.0 ships with a broken kqueue. The new libevent release (1.1) detects and disables kqueue if it's broken. - Append default exit policy before checking for implicit internal addresses. Now we don't log a bunch of complaints on startup when using the default exit policy. - Some people were putting "Address " in their torrc, and they had a buggy resolver that resolved " " to 0.0.0.0. Oops. - If DataDir is ~/.tor, and that expands to /.tor, then default to LOCALSTATEDIR/tor instead. - Fix fragmented-message bug in TorControl.py. - Resolve a minor bug which would prevent unreachable dirports from getting suppressed in the published descriptor. - When the controller gave us a new descriptor, we weren't resolving it immediately, so Tor would think its address was 0.0.0.0 until we fetched a new directory. - Fix an uppercase/lowercase case error in suppressing a bogus libevent warning on some Linuxes. o Features: - Begin scrubbing sensitive strings from logs by default. Turn off the config option SafeLogging if you need to do debugging. - Switch to a new buffer management algorithm, which tries to avoid reallocing and copying quite as much. In first tests it looks like it uses *more* memory on average, but less cpu. - First cut at support for "create-fast" cells. Clients can use these when extending to their first hop, since the TLS already provides forward secrecy and authentication. Not enabled on clients yet. - When dirservers refuse a router descriptor, we now log its contactinfo, platform, and the poster's IP address. - Call tor_free_all instead of connections_free_all after forking, to save memory on systems that need to fork. - Whine at you if you're a server and you don't set your contactinfo. - Implement --verify-config command-line option to check if your torrc is valid without actually launching Tor. - Rewrite address "serifos.exit" to "externalIP.serifos.exit" rather than just rejecting it. Changes in version 0.1.0.5-rc - 2005-04-27 o Bugfixes: - Stop trying to print a null pointer if an OR conn fails because we didn't like its cert. o Features: - Switch our internal buffers implementation to use a ring buffer, to hopefully improve performance for fast servers a lot. - Add HttpsProxyAuthenticator support (basic auth only), based on patch from Adam Langley. - Bump the default BandwidthRate from 1 MB to 2 MB, to accommodate the fast servers that have been joining lately. - Give hidden service accesses extra time on the first attempt, since 60 seconds is often only barely enough. This might improve robustness more. - Improve performance for dirservers: stop re-parsing the whole directory every time you regenerate it. - Add more debugging info to help us find the weird dns netbsd pthreads bug; cleaner debug messages to help track future issues. Changes in version 0.1.0.4-rc - 2005-04-23 o Bugfixes: - If unofficial Tor clients connect and send weird TLS certs, our Tor server triggers an assert. Stop asserting, and start handling TLS errors better in other situations too. - When the controller asks us to tell it about all the debug-level logs, it turns out we were generating debug-level logs while telling it about them, which turns into a bad loop. Now keep track of whether you're sending a debug log to the controller, and don't log when you are. - Fix the "postdescriptor" feature of the controller interface: on non-complete success, only say "done" once. o Features: - Clients are now willing to load balance over up to 2mB, not 1mB, of advertised bandwidth capacity. - Add a NoPublish config option, so you can be a server (e.g. for testing running Tor servers in other Tor networks) without publishing your descriptor to the primary dirservers. Changes in version 0.1.0.3-rc - 2005-04-08 o Improvements on 0.1.0.2-rc: - Client now retries when streams end early for 'hibernating' or 'resource limit' reasons, rather than failing them. - More automated handling for dirserver operators: - Automatically approve nodes running 0.1.0.2-rc or later, now that the the reachability detection stuff is working. - Now we allow two unverified servers with the same nickname but different keys. But if a nickname is verified, only that nickname+key are allowed. - If you're an authdirserver connecting to an address:port, and it's not the OR you were expecting, forget about that descriptor. If he *was* the one you were expecting, then forget about all other descriptors for that address:port. - Allow servers to publish descriptors from 12 hours in the future. Corollary: only whine about clock skew from the dirserver if he's a trusted dirserver (since now even verified servers could have quite wrong clocks). - Adjust maximum skew and age for rendezvous descriptors: let skew be 48 hours rather than 90 minutes. - Efficiency improvements: - Keep a big splay tree of (circid,orconn)->circuit mappings to make it much faster to look up a circuit for each relay cell. - Remove most calls to assert_all_pending_dns_resolves_ok(), since they're eating our cpu on exit nodes. - Stop wasting time doing a case insensitive comparison for every dns name every time we do any lookup. Canonicalize the names to lowercase and be done with it. - Start sending 'truncated' cells back rather than destroy cells, if the circuit closes in front of you. This means we won't have to abandon partially built circuits. - Only warn once per nickname from add_nickname_list_to_smartlist per failure, so an entrynode or exitnode choice that's down won't yell so much. - Put a note in the torrc about abuse potential with the default exit policy. - Revise control spec and implementation to allow all log messages to be sent to controller with their severities intact (suggested by Matt Edman). Update TorControl to handle new log event types. - Provide better explanation messages when controller's POSTDESCRIPTOR fails. - Stop putting nodename in the Platform string in server descriptors. It doesn't actually help, and it is confusing/upsetting some people. o Bugfixes on 0.1.0.2-rc: - We were printing the host mask wrong in exit policies in server descriptors. This isn't a critical bug though, since we were still obeying the exit policy internally. - Fix Tor when compiled with libevent but without pthreads: move connection_unregister() from _connection_free() to connection_free(). - Fix an assert trigger (already fixed in 0.0.9.x): when we have the rare mysterious case of accepting a conn on 0.0.0.0:0, then when we look through the connection array, we'll find any of the cpu/dnsworkers. This is no good. o Bugfixes on 0.0.9.x: - Fix possible bug on threading platforms (e.g. win32) which was leaking a file descriptor whenever a cpuworker or dnsworker died. - When using preferred entry or exit nodes, ignore whether the circuit wants uptime or capacity. They asked for the nodes, they get the nodes. - chdir() to your datadirectory at the *end* of the daemonize process, not the beginning. This was a problem because the first time you run tor, if your datadir isn't there, and you have runasdaemon set to 1, it will try to chdir to it before it tries to create it. Oops. - Handle changed router status correctly when dirserver reloads fingerprint file. We used to be dropping all unverified descriptors right then. The bug was hidden because we would immediately fetch a directory from another dirserver, which would include the descriptors we just dropped. - When we're connecting to an OR and he's got a different nickname/key than we were expecting, only complain loudly if we're an OP or a dirserver. Complaining loudly to the OR admins just confuses them. - Tie MAX_DIR_SIZE to MAX_BUF_SIZE, so now directory sizes won't get artificially capped at 500kB. Changes in version 0.1.0.2-rc - 2005-04-01 o Bugfixes on 0.1.0.1-rc: - Fixes on reachability detection: - Don't check for reachability while hibernating. - If ORPort is reachable but DirPort isn't, still publish the descriptor, but zero out DirPort until it's found reachable. - When building testing circs for ORPort testing, use only high-bandwidth nodes, so fewer circuits fail. - Complain about unreachable ORPort separately from unreachable DirPort, so the user knows what's going on. - Make sure we only conclude ORPort reachability if we didn't initiate the conn. Otherwise we could falsely conclude that we're reachable just because we connected to the guy earlier and he used that same pipe to extend to us. - Authdirservers shouldn't do ORPort reachability detection, since they're in clique mode, so it will be rare to find a server not already connected to them. - When building testing circuits, always pick middle hops running Tor 0.0.9.7, so we avoid the "can't extend to unknown routers" bug. (This is a kludge; it will go away when 0.0.9.x becomes obsolete.) - When we decide we're reachable, actually publish our descriptor right then. - Fix bug in redirectstream in the controller. - Fix the state descriptor strings so logs don't claim edge streams are in a different state than they actually are. - Use recent libevent features when possible (this only really affects win32 and osx right now, because the new libevent with these features hasn't been released yet). Add code to suppress spurious libevent log msgs. - Prevent possible segfault in connection_close_unattached_ap(). - Fix newlines on torrc in win32. - Improve error msgs when tor-resolve fails. o Improvements on 0.0.9.x: - New experimental script tor/contrib/ExerciseServer.py (needs more work) that uses the controller interface to build circuits and fetch pages over them. This will help us bootstrap servers that have lots of capacity but haven't noticed it yet. - New experimental script tor/contrib/PathDemo.py (needs more work) that uses the controller interface to let you choose whole paths via addresses like "...path" - When we've connected to an OR and handshaked but didn't like the result, we were closing the conn without sending destroy cells back for pending circuits. Now send those destroys. Changes in version 0.1.0.1-rc - 2005-03-28 o New features: - Add reachability testing. Your Tor server will automatically try to see if its ORPort and DirPort are reachable from the outside, and it won't upload its descriptor until it decides they are. - Handle unavailable hidden services better. Handle slow or busy hidden services better. - Add support for CONNECTing through https proxies, with "HttpsProxy" config option. - New exit policy: accept most low-numbered ports, rather than rejecting most low-numbered ports. - More Tor controller support (still experimental). See http://tor.eff.org/doc/control-spec.txt for all the new features, including signals to emulate unix signals from any platform; redirectstream; extendcircuit; mapaddress; getinfo; postdescriptor; closestream; closecircuit; etc. - Make nt services work and start on startup on win32 (based on patch by Matt Edman). - Add a new AddressMap config directive to rewrite incoming socks addresses. This lets you, for example, declare an implicit required exit node for certain sites. - Add a new TrackHostExits config directive to trigger addressmaps for certain incoming socks addresses -- for sites that break when your exit keeps changing (based on patch from Mike Perry). - Redo the client-side dns cache so it's just an addressmap too. - Notice when our IP changes, and reset stats/uptime/reachability. - When an application is using socks5, give him the whole variety of potential socks5 responses (connect refused, host unreachable, etc), rather than just "success" or "failure". - A more sane version numbering system. See http://tor.eff.org/cvs/tor/doc/version-spec.txt for details. - New contributed script "exitlist": a simple python script to parse directories and find Tor nodes that exit to listed addresses/ports. - New contributed script "privoxy-tor-toggle" to toggle whether Privoxy uses Tor. Seems to be configured for Debian by default. - Report HTTP reasons to client when getting a response from directory servers -- so you can actually know what went wrong. - New config option MaxAdvertisedBandwidth which lets you advertise a low bandwidthrate (to not attract as many circuits) while still allowing a higher bandwidthrate in reality. o Robustness/stability fixes: - Make Tor use Niels Provos's libevent instead of its current poll-but-sometimes-select mess. This will let us use faster async cores (like epoll, kpoll, and /dev/poll), and hopefully work better on Windows too. - pthread support now too. This was forced because when we forked, we ended up wasting a lot of duplicate ram over time. Also switch to foo_r versions of some library calls to allow reentry and threadsafeness. - Better handling for heterogeneous / unreliable nodes: - Annotate circuits w/ whether they aim to contain high uptime nodes and/or high capacity nodes. When building circuits, choose appropriate nodes. - This means that every single node in an intro rend circuit, not just the last one, will have a minimum uptime. - New config option LongLivedPorts to indicate application streams that will want high uptime circuits. - Servers reset uptime when a dir fetch entirely fails. This hopefully reflects stability of the server's network connectivity. - If somebody starts his tor server in Jan 2004 and then fixes his clock, don't make his published uptime be a year. - Reset published uptime when you wake up from hibernation. - Introduce a notion of 'internal' circs, which are chosen without regard to the exit policy of the last hop. Intro and rendezvous circs must be internal circs, to avoid leaking information. Resolve and connect streams can use internal circs if they want. - New circuit pooling algorithm: make sure to have enough circs around to satisfy any predicted ports, and also make sure to have 2 internal circs around if we've required internal circs lately (and with high uptime if we've seen that lately too). - Split NewCircuitPeriod option into NewCircuitPeriod (30 secs), which describes how often we retry making new circuits if current ones are dirty, and MaxCircuitDirtiness (10 mins), which describes how long we're willing to make use of an already-dirty circuit. - Cannibalize GENERAL circs to be C_REND, C_INTRO, S_INTRO, and S_REND circ as necessary, if there are any completed ones lying around when we try to launch one. - Make hidden services try to establish a rendezvous for 30 seconds, rather than for n (where n=3) attempts to build a circuit. - Change SHUTDOWN_WAIT_LENGTH from a fixed 30 secs to a config option "ShutdownWaitLength". - Try to be more zealous about calling connection_edge_end when things go bad with edge conns in connection.c. - Revise tor-spec to add more/better stream end reasons. - Revise all calls to connection_edge_end to avoid sending "misc", and to take errno into account where possible. o Bug fixes: - Fix a race condition that can trigger an assert, when we have a pending create cell and an OR connection fails right then. - Fix several double-mark-for-close bugs, e.g. where we were finding a conn for a cell even if that conn is already marked for close. - Make sequence of log messages when starting on win32 with no config file more reasonable. - When choosing an exit node for a new non-internal circ, don't take into account whether it'll be useful for any pending x.onion addresses -- it won't. - Turn addr_policy_compare from a tristate to a quadstate; this should help address our "Ah, you allow 1.2.3.4:80. You are a good choice for google.com" problem. - Make "platform" string in descriptor more accurate for Win32 servers, so it's not just "unknown platform". - Fix an edge case in parsing config options (thanks weasel). If they say "--" on the commandline, it's not an option. - Reject odd-looking addresses at the client (e.g. addresses that contain a colon), rather than having the server drop them because they're malformed. - tor-resolve requests were ignoring .exit if there was a working circuit they could use instead. - REUSEADDR on normal platforms means you can rebind to the port right after somebody else has let it go. But REUSEADDR on win32 means to let you bind to the port _even when somebody else already has it bound_! So, don't do that on Win32. - Change version parsing logic: a version is "obsolete" if it is not recommended and (1) there is a newer recommended version in the same series, or (2) there are no recommended versions in the same series, but there are some recommended versions in a newer series. A version is "new" if it is newer than any recommended version in the same series. - Stop most cases of hanging up on a socks connection without sending the socks reject. o Helpful fixes: - Require BandwidthRate to be at least 20kB/s for servers. - When a dirserver causes you to give a warn, mention which dirserver it was. - New config option DirAllowPrivateAddresses for authdirservers. Now by default they refuse router descriptors that have non-IP or private-IP addresses. - Stop publishing socksport in the directory, since it's not actually meant to be public. For compatibility, publish a 0 there for now. - Change DirFetchPeriod/StatusFetchPeriod to have a special "Be smart" value, that is low for servers and high for clients. - If our clock jumps forward by 100 seconds or more, assume something has gone wrong with our network and abandon all not-yet-used circs. - Warn when exit policy implicitly allows local addresses. - If we get an incredibly skewed timestamp from a dirserver mirror that isn't a verified OR, don't warn -- it's probably him that's wrong. - Since we ship our own Privoxy on OS X, tweak it so it doesn't write cookies to disk and doesn't log each web request to disk. (Thanks to Brett Carrington for pointing this out.) - When a client asks us for a dir mirror and we don't have one, launch an attempt to get a fresh one. - If we're hibernating and we get a SIGINT, exit immediately. - Add --with-dmalloc ./configure option, to track memory leaks. - And try to free all memory on closing, so we can detect what we're leaking. - Cache local dns resolves correctly even when they're .exit addresses. - Give a better warning when some other server advertises an ORPort that is actually an apache running ssl. - Add "opt hibernating 1" to server descriptor to make it clearer whether the server is hibernating. Changes in version 0.0.9.9 - 2005-04-23 o Bugfixes on 0.0.9.x: - If unofficial Tor clients connect and send weird TLS certs, our Tor server triggers an assert. This release contains a minimal backport from the broader fix that we put into 0.1.0.4-rc. Changes in version 0.0.9.8 - 2005-04-07 o Bugfixes on 0.0.9.x: - We have a bug that I haven't found yet. Sometimes, very rarely, cpuworkers get stuck in the 'busy' state, even though the cpuworker thinks of itself as idle. This meant that no new circuits ever got established. Here's a workaround to kill any cpuworker that's been busy for more than 100 seconds. Changes in version 0.0.9.7 - 2005-04-01 o Bugfixes on 0.0.9.x: - Fix another race crash bug (thanks to Glenn Fink for reporting). - Compare identity to identity, not to nickname, when extending to a router not already in the directory. This was preventing us from extending to unknown routers. Oops. - Make sure to create OS X Tor user in <500 range, so we aren't creating actual system users. - Note where connection-that-hasn't-sent-end was marked, and fix a few really loud instances of this harmless bug (it's fixed more in 0.1.0.x). Changes in version 0.0.9.6 - 2005-03-24 o Bugfixes on 0.0.9.x (crashes and asserts): - Add new end stream reasons to maintainance branch. Fix bug where reason (8) could trigger an assert. Prevent bug from recurring. - Apparently win32 stat wants paths to not end with a slash. - Fix assert triggers in assert_cpath_layer_ok(), where we were blowing away the circuit that conn->cpath_layer points to, then checking to see if the circ is well-formed. Backport check to make sure we dont use the cpath on a closed connection. - Prevent circuit_resume_edge_reading_helper() from trying to package inbufs for marked-for-close streams. - Don't crash on hup if your options->address has become unresolvable. - Some systems (like OS X) sometimes accept() a connection and tell you the remote host is 0.0.0.0:0. If this happens, due to some other mis-features, we get confused; so refuse the conn for now. o Bugfixes on 0.0.9.x (other): - Fix harmless but scary "Unrecognized content encoding" warn message. - Add new stream error reason: TORPROTOCOL reason means "you are not speaking a version of Tor I understand; say bye-bye to your stream." - Be willing to cache directories from up to ROUTER_MAX_AGE seconds into the future, now that we are more tolerant of skew. This resolves a bug where a Tor server would refuse to cache a directory because all the directories it gets are too far in the future; yet the Tor server never logs any complaints about clock skew. - Mac packaging magic: make man pages useable, and do not overwrite existing torrc files. - Make OS X log happily to /var/log/tor/tor.log Changes in version 0.0.9.5 - 2005-02-22 o Bugfixes on 0.0.9.x: - Fix an assert race at exit nodes when resolve requests fail. - Stop picking unverified dir mirrors--it only leads to misery. - Patch from Matt Edman to make NT services work better. Service support is still not compiled into the executable by default. - Patch from Dmitri Bely so the Tor service runs better under the win32 SYSTEM account. - Make tor-resolve actually work (?) on Win32. - Fix a sign bug when getrlimit claims to have 4+ billion file descriptors available. - Stop refusing to start when bandwidthburst == bandwidthrate. - When create cells have been on the onion queue more than five seconds, just send back a destroy and take them off the list. Changes in version 0.0.9.4 - 2005-02-03 o Bugfixes on 0.0.9: - Fix an assert bug that took down most of our servers: when a server claims to have 1 GB of bandwidthburst, don't freak out. - Don't crash as badly if we have spawned the max allowed number of dnsworkers, or we're out of file descriptors. - Block more file-sharing ports in the default exit policy. - MaxConn is now automatically set to the hard limit of max file descriptors we're allowed (ulimit -n), minus a few for logs, etc. - Give a clearer message when servers need to raise their ulimit -n when they start running out of file descriptors. - SGI Compatibility patches from Jan Schaumann. - Tolerate a corrupt cached directory better. - When a dirserver hasn't approved your server, list which one. - Go into soft hibernation after 95% of the bandwidth is used, not 99%. This is especially important for daily hibernators who have a small accounting max. Hopefully it will result in fewer cut connections when the hard hibernation starts. - Load-balance better when using servers that claim more than 800kB/s of capacity. - Make NT services work (experimental, only used if compiled in). Changes in version 0.0.9.3 - 2005-01-21 o Bugfixes on 0.0.9: - Backport the cpu use fixes from main branch, so busy servers won't need as much processor time. - Work better when we go offline and then come back, or when we run Tor at boot before the network is up. We do this by optimistically trying to fetch a new directory whenever an application request comes in and we think we're offline -- the human is hopefully a good measure of when the network is back. - Backport some minimal hidserv bugfixes: keep rend circuits open as long as you keep using them; actually publish hidserv descriptors shortly after they change, rather than waiting 20-40 minutes. - Enable Mac startup script by default. - Fix duplicate dns_cancel_pending_resolve reported by Giorgos Pallas. - When you update AllowUnverifiedNodes or FirewallPorts via the controller's setconf feature, we were always appending, never resetting. - When you update HiddenServiceDir via setconf, it was screwing up the order of reading the lines, making it fail. - Do not rewrite a cached directory back to the cache; otherwise we will think it is recent and not fetch a newer one on startup. - Workaround for webservers that lie about Content-Encoding: Tor now tries to autodetect compressed directories and compression itself. This lets us Proxypass dir fetches through apache. Changes in version 0.0.9.2 - 2005-01-04 o Bugfixes on 0.0.9 (crashes and asserts): - Fix an assert on startup when the disk is full and you're logging to a file. - If you do socks4 with an IP of 0.0.0.x but *don't* provide a socks4a style address, then we'd crash. - Fix an assert trigger when the running-routers string we get from a dirserver is broken. - Make worker threads start and run on win32. Now win32 servers may work better. - Bandaid (not actually fix, but now it doesn't crash) an assert where the dns worker dies mysteriously and the main Tor process doesn't remember anything about the address it was resolving. o Bugfixes on 0.0.9 (Win32): - Workaround for brain-damaged __FILE__ handling on MSVC: keep Nick's name out of the warning/assert messages. - Fix a superficial "unhandled error on read" bug on win32. - The win32 installer no longer requires a click-through for our license, since our Free Software license grants rights but does not take any away. - Win32: When connecting to a dirserver fails, try another one immediately. (This was already working for non-win32 Tors.) - Stop trying to parse $HOME on win32 when hunting for default DataDirectory. - Make tor-resolve.c work on win32 by calling network_init(). o Bugfixes on 0.0.9 (other): - Make 0.0.9.x build on Solaris again. - Due to a fencepost error, we were blowing away the \n when reporting confvalue items in the controller. So asking for multiple config values at once couldn't work. - When listing circuits that are pending on an opening OR connection, if we're an OR we were listing circuits that *end* at us as being pending on every listener, dns/cpu worker, etc. Stop that. - Dirservers were failing to create 'running-routers' or 'directory' strings if we had more than some threshold of routers. Fix them so they can handle any number of routers. - Fix a superficial "Duplicate mark for close" bug. - Stop checking for clock skew for OR connections, even for servers. - Fix a fencepost error that was chopping off the last letter of any nickname that is the maximum allowed nickname length. - Update URLs in log messages so they point to the new website. - Fix a potential problem in mangling server private keys while writing to disk (not triggered yet, as far as we know). - Include the licenses for other free software we include in Tor, now that we're shipping binary distributions more regularly. Changes in version 0.0.9.1 - 2004-12-15 o Bugfixes on 0.0.9: - Make hibernation actually work. - Make HashedControlPassword config option work. - When we're reporting event circuit status to a controller, don't use the stream status code. Changes in version 0.0.9 - 2004-12-12 o Bugfixes on 0.0.8.1 (Crashes and asserts): - Catch and ignore SIGXFSZ signals when log files exceed 2GB; our write() call will fail and we handle it there. - When we run out of disk space, or other log writing error, don't crash. Just stop logging to that log and continue. - Fix isspace() and friends so they still make Solaris happy but also so they don't trigger asserts on win32. - Fix assert failure on malformed socks4a requests. - Fix an assert bug where a hidden service provider would fail if the first hop of his rendezvous circuit was down. - Better handling of size_t vs int, so we're more robust on 64 bit platforms. o Bugfixes on 0.0.8.1 (Win32): - Make windows sockets actually non-blocking (oops), and handle win32 socket errors better. - Fix parse_iso_time on platforms without strptime (eg win32). - win32: when being multithreaded, leave parent fdarray open. - Better handling of winsock includes on non-MSV win32 compilers. - Change our file IO stuff (especially wrt OpenSSL) so win32 is happier. - Make unit tests work on win32. o Bugfixes on 0.0.8.1 (Path selection and streams): - Calculate timeout for waiting for a connected cell from the time we sent the begin cell, not from the time the stream started. If it took a long time to establish the circuit, we would time out right after sending the begin cell. - Fix router_compare_addr_to_addr_policy: it was not treating a port of * as always matching, so we were picking reject *:* nodes as exit nodes too. Oops. - When read() failed on a stream, we would close it without sending back an end. So 'connection refused' would simply be ignored and the user would get no response. - Stop a sigpipe: when an 'end' cell races with eof from the app, we shouldn't hold-open-until-flush if the eof arrived first. - Let resolve conns retry/expire also, rather than sticking around forever. - Fix more dns related bugs: send back resolve_failed and end cells more reliably when the resolve fails, rather than closing the circuit and then trying to send the cell. Also attach dummy resolve connections to a circuit *before* calling dns_resolve(), to fix a bug where cached answers would never be sent in RESOLVED cells. o Bugfixes on 0.0.8.1 (Circuits): - Finally fix a bug that's been plaguing us for a year: With high load, circuit package window was reaching 0. Whenever we got a circuit-level sendme, we were reading a lot on each socket, but only writing out a bit. So we would eventually reach eof. This would be noticed and acted on even when there were still bytes sitting in the inbuf. - Use identity comparison, not nickname comparison, to choose which half of circuit-ID-space each side gets to use. This is needed because sometimes we think of a router as a nickname, and sometimes as a hex ID, and we can't predict what the other side will do. o Bugfixes on 0.0.8.1 (Other): - Fix a whole slew of memory leaks. - Disallow NDEBUG. We don't ever want anybody to turn off debug. - If we are using select, make sure we stay within FD_SETSIZE. - When poll() is interrupted, we shouldn't believe the revents values. - Add a FAST_SMARTLIST define to optionally inline smartlist_get and smartlist_len, which are two major profiling offenders. - If do_hup fails, actually notice. - Flush the log file descriptor after we print "Tor opening log file", so we don't see those messages days later. - Hidden service operators now correctly handle version 1 style INTRODUCE1 cells (nobody generates them still, so not a critical bug). - Handle more errnos from accept() without closing the listener. Some OpenBSD machines were closing their listeners because they ran out of file descriptors. - Some people had wrapped their tor client/server in a script that would restart it whenever it died. This did not play well with our "shut down if your version is obsolete" code. Now people don't fetch a new directory if their local cached version is recent enough. - Make our autogen.sh work on ksh as well as bash. - Better torrc example lines for dirbindaddress and orbindaddress. - Improved bounds checking on parsed ints (e.g. config options and the ones we find in directories.) - Stop using separate defaults for no-config-file and empty-config-file. Now you have to explicitly turn off SocksPort, if you don't want it open. - We were starting to daemonize before we opened our logs, so if there were any problems opening logs, we would complain to stderr, which wouldn't work, and then mysteriously exit. - If a verified OR connects to us before he's uploaded his descriptor, or we verify him and hup but he still has the original TLS connection, then conn->nickname is still set like he's unverified. o Code security improvements, inspired by Ilja: - tor_snprintf wrapper over snprintf with consistent (though not C99) overflow behavior. - Replace sprintf with tor_snprintf. (I think they were all safe, but hey.) - Replace strcpy/strncpy with strlcpy in more places. - Avoid strcat; use tor_snprintf or strlcat instead. o Features (circuits and streams): - New circuit building strategy: keep a list of ports that we've used in the past 6 hours, and always try to have 2 circuits open or on the way that will handle each such port. Seed us with port 80 so web users won't complain that Tor is "slow to start up". - Make kill -USR1 dump more useful stats about circuits. - When warning about retrying or giving up, print the address, so the user knows which one it's talking about. - If you haven't used a clean circuit in an hour, throw it away, just to be on the safe side. (This means after 6 hours a totally unused Tor client will have no circuits open.) - Support "foo.nickname.exit" addresses, to let Alice request the address "foo" as viewed by exit node "nickname". Based on a patch from Geoff Goodell. - If your requested entry or exit node has advertised bandwidth 0, pick it anyway. - Be more greedy about filling up relay cells -- we try reading again once we've processed the stuff we read, in case enough has arrived to fill the last cell completely. - Refuse application socks connections to port 0. - Use only 0.0.9pre1 and later servers for resolve cells. o Features (bandwidth): - Hibernation: New config option "AccountingMax" lets you set how many bytes per month (in each direction) you want to allow your server to consume. Rather than spreading those bytes out evenly over the month, we instead hibernate for some of the month and pop up at a deterministic time, work until the bytes are consumed, then hibernate again. Config option "MonthlyAccountingStart" lets you specify which day of the month your billing cycle starts on. - Implement weekly/monthly/daily accounting: now you specify your hibernation properties by AccountingMax N bytes|KB|MB|GB|TB AccountingStart day|week|month [day] HH:MM Defaults to "month 1 0:00". - Let bandwidth and interval config options be specified as 5 bytes, kb, kilobytes, etc; and as seconds, minutes, hours, days, weeks. o Features (directories): - New "router-status" line in directory, to better bind each verified nickname to its identity key. - Clients can ask dirservers for /dir.z to get a compressed version of the directory. Only works for servers running 0.0.9, of course. - Make clients cache directories and use them to seed their router lists at startup. This means clients have a datadir again. - Respond to content-encoding headers by trying to uncompress as appropriate. - Clients and servers now fetch running-routers; cache running-routers; compress running-routers; serve compressed running-routers.z - Make moria2 advertise a dirport of 80, so people behind firewalls will be able to get a directory. - Http proxy support - Dirservers translate requests for http://%s:%d/x to /x - You can specify "HttpProxy %s[:%d]" and all dir fetches will be routed through this host. - Clients ask for /tor/x rather than /x for new enough dirservers. This way we can one day coexist peacefully with apache. - Clients specify a "Host: %s%d" http header, to be compatible with more proxies, and so running squid on an exit node can work. - Protect dirservers from overzealous descriptor uploading -- wait 10 seconds after directory gets dirty, before regenerating. o Features (packages and install): - Add NSI installer contributed by J Doe. - Apply NT service patch from Osamu Fujino. Still needs more work. - Commit VC6 and VC7 workspace/project files. - Commit a tor.spec for making RPM files, with help from jbash. - Add contrib/torctl.in contributed by Glenn Fink. - Make expand_filename handle ~ and ~username. - Use autoconf to enable largefile support where necessary. Use ftello where available, since ftell can fail at 2GB. - Ship src/win32/ in the tarball, so people can use it to build. - Make old win32 fall back to CWD if SHGetSpecialFolderLocation is broken. o Features (ui controller): - Control interface: a separate program can now talk to your client/server over a socket, and get/set config options, receive notifications of circuits and streams starting/finishing/dying, bandwidth used, etc. The next step is to get some GUIs working. Let us know if you want to help out. See doc/control-spec.txt . - Ship a contrib/tor-control.py as an example script to interact with the control port. - "tor --hash-password zzyxz" will output a salted password for use in authenticating to the control interface. - Implement the control-spec's SAVECONF command, to write your configuration to torrc. - Get cookie authentication for the controller closer to working. - When set_conf changes our server descriptor, upload a new copy. But don't upload it too often if there are frequent changes. o Features (config and command-line): - Deprecate unofficial config option abbreviations, and abbreviations not on the command line. - Configuration infrastructure support for warning on obsolete options. - Give a slightly more useful output for "tor -h". - Break DirFetchPostPeriod into: - DirFetchPeriod for fetching full directory, - StatusFetchPeriod for fetching running-routers, - DirPostPeriod for posting server descriptor, - RendPostPeriod for posting hidden service descriptors. - New log format in config: "Log minsev[-maxsev] stdout|stderr|syslog" or "Log minsev[-maxsev] file /var/foo" - DirPolicy config option, to let people reject incoming addresses from their dirserver. - "tor --list-fingerprint" will list your identity key fingerprint and then exit. - Make tor --version --version dump the cvs Id of every file. - New 'MyFamily nick1,...' config option for a server to specify other servers that shouldn't be used in the same circuit with it. Only believed if nick1 also specifies us. - New 'NodeFamily nick1,nick2,...' config option for a client to specify nodes that it doesn't want to use in the same circuit. - New 'Redirectexit pattern address:port' config option for a server to redirect exit connections, e.g. to a local squid. - Add "pass" target for RedirectExit, to make it easier to break out of a sequence of RedirectExit rules. - Make the dirservers file obsolete. - Include a dir-signing-key token in directories to tell the parsing entity which key is being used to sign. - Remove the built-in bulky default dirservers string. - New config option "Dirserver %s:%d [fingerprint]", which can be repeated as many times as needed. If no dirservers specified, default to moria1,moria2,tor26. - Make 'Routerfile' config option obsolete. - Discourage people from setting their dirfetchpostperiod more often than once per minute. o Features (other): - kill -USR2 now moves all logs to loglevel debug (kill -HUP to get back to normal.) - Accept *:706 (silc) in default exit policy. - Implement new versioning format for post 0.1. - Distinguish between TOR_TLS_CLOSE and TOR_TLS_ERROR, so we can log more informatively. - Check clock skew for verified servers, but allow unverified servers and clients to have any clock skew. - Make sure the hidden service descriptors are at a random offset from each other, to hinder linkability. - Clients now generate a TLS cert too, in preparation for having them act more like real nodes. - Add a pure-C tor-resolve implementation. - Use getrlimit and friends to ensure we can reach MaxConn (currently 1024) file descriptors. - Raise the max dns workers from 50 to 100. Changes in version 0.0.8.1 - 2004-10-13 o Bugfixes: - Fix a seg fault that can be triggered remotely for Tor clients/servers with an open dirport. - Fix a rare assert trigger, where routerinfos for entries in our cpath would expire while we're building the path. - Fix a bug in OutboundBindAddress so it (hopefully) works. - Fix a rare seg fault for people running hidden services on intermittent connections. - Fix a bug in parsing opt keywords with objects. - Fix a stale pointer assert bug when a stream detaches and reattaches. - Fix a string format vulnerability (probably not exploitable) in reporting stats locally. - Fix an assert trigger: sometimes launching circuits can fail immediately, e.g. because too many circuits have failed recently. - Fix a compile warning on 64 bit platforms. Changes in version 0.0.8 - 2004-08-25 o Bugfixes: - Made our unit tests compile again on OpenBSD 3.5, and tor itself compile again on OpenBSD on a sparc64. - We were neglecting milliseconds when logging on win32, so everything appeared to happen at the beginning of each second. - Check directory signature _before_ you decide whether you're you're running an obsolete version and should exit. - Check directory signature _before_ you parse the running-routers list to decide who's running. - Check return value of fclose while writing to disk, so we don't end up with broken files when servers run out of disk space. - Port it to SunOS 5.9 / Athena - Fix two bugs in saving onion keys to disk when rotating, so hopefully we'll get fewer people using old onion keys. - Remove our mostly unused -- and broken -- hex_encode() function. Use base16_encode() instead. (Thanks to Timo Lindfors for pointing out this bug.) - Only pick and establish intro points after we've gotten a directory. - Fix assert triggers: if the other side returns an address 0.0.0.0, don't put it into the client dns cache. - If a begin failed due to exit policy, but we believe the IP address should have been allowed, switch that router to exitpolicy reject *:* until we get our next directory. o Protocol changes: - 'Extend' relay cell payloads now include the digest of the intended next hop's identity key. Now we can verify that we're extending to the right router, and also extend to routers we hadn't heard of before. o Features: - Tor nodes can now act as relays (with an advertised ORPort) without being manually verified by the dirserver operators. - Uploaded descriptors of unverified routers are now accepted by the dirservers, and included in the directory. - Verified routers are listed by nickname in the running-routers list; unverified routers are listed as "$". - We now use hash-of-identity-key in most places rather than nickname or addr:port, for improved security/flexibility. - AllowUnverifiedNodes config option to let circuits choose no-name routers in entry,middle,exit,introduction,rendezvous positions. Allow middle and rendezvous positions by default. - When picking unverified routers, skip those with low uptime and/or low bandwidth, depending on what properties you care about. - ClientOnly option for nodes that never want to become servers. - Directory caching. - "AuthoritativeDir 1" option for the official dirservers. - Now other nodes (clients and servers) will cache the latest directory they've pulled down. - They can enable their DirPort to serve it to others. - Clients will pull down a directory from any node with an open DirPort, and check the signature/timestamp correctly. - Authoritative dirservers now fetch directories from other authdirservers, to stay better synced. - Running-routers list tells who's down also, along with noting if they're verified (listed by nickname) or unverified (listed by hash-of-key). - Allow dirservers to serve running-router list separately. This isn't used yet. - You can now fetch $DIRURL/running-routers to get just the running-routers line, not the whole descriptor list. (But clients don't use this yet.) - Clients choose nodes proportional to advertised bandwidth. - Clients avoid using nodes with low uptime as introduction points. - Handle servers with dynamic IP addresses: don't just replace options->Address with the resolved one at startup, and detect our address right before we make a routerinfo each time. - 'FascistFirewall' option to pick dirservers and ORs on specific ports; plus 'FirewallPorts' config option to tell FascistFirewall which ports are open. (Defaults to 80,443) - Try other dirservers immediately if the one you try is down. This should tolerate down dirservers better now. - ORs connect-on-demand to other ORs - If you get an extend cell to an OR you're not connected to, connect, handshake, and forward the create cell. - The authoritative dirservers stay connected to everybody, and everybody stays connected to 0.0.7 servers, but otherwise clients/servers expire unused connections after 5 minutes. - When servers get a sigint, they delay 30 seconds (refusing new connections) then exit. A second sigint causes immediate exit. - File and name management: - Look for .torrc if no CONFDIR "torrc" is found. - If no datadir is defined, then choose, make, and secure ~/.tor as datadir. - If torrc not found, exitpolicy reject *:*. - Expands ~/ in filenames to $HOME/ (but doesn't yet expand ~arma). - If no nickname is defined, derive default from hostname. - Rename secret key files, e.g. identity.key -> secret_id_key, to discourage people from mailing their identity key to tor-ops. - Refuse to build a circuit before the directory has arrived -- it won't work anyway, since you won't know the right onion keys to use. - Parse tor version numbers so we can do an is-newer-than check rather than an is-in-the-list check. - New socks command 'resolve', to let us shim gethostbyname() locally. - A 'tor_resolve' script to access the socks resolve functionality. - A new socks-extensions.txt doc file to describe our interpretation and extensions to the socks protocols. - Add a ContactInfo option, which gets published in descriptor. - Write tor version at the top of each log file - New docs in the tarball: - tor-doc.html. - Document that you should proxy your SSL traffic too. - Log a warning if the user uses an unsafe socks variant, so people are more likely to learn about privoxy or socat. - Log a warning if you're running an unverified server, to let you know you might want to get it verified. - Change the default exit policy to reject the default edonkey, kazaa, gnutella ports. - Add replace_file() to util.[ch] to handle win32's rename(). - Publish OR uptime in descriptor (and thus in directory) too. - Remember used bandwidth (both in and out), and publish 15-minute snapshots for the past day into our descriptor. - Be more aggressive about trying to make circuits when the network has changed (e.g. when you unsuspend your laptop). - Check for time skew on http headers; report date in response to "GET /". - If the entrynode config line has only one node, don't pick it as an exitnode. - Add strict{entry|exit}nodes config options. If set to 1, then we refuse to build circuits that don't include the specified entry or exit nodes. - OutboundBindAddress config option, to bind to a specific IP address for outgoing connect()s. - End truncated log entries (e.g. directories) with "[truncated]". Changes in version 0.0.7.3 - 2004-08-12 o Stop dnsworkers from triggering an assert failure when you ask them to resolve the host "". Changes in version 0.0.7.2 - 2004-07-07 o A better fix for the 0.0.0.0 problem, that will hopefully eliminate the remaining related assertion failures. Changes in version 0.0.7.1 - 2004-07-04 o When an address resolves to 0.0.0.0, treat it as a failed resolve, since internally we use 0.0.0.0 to signify "not yet resolved". Changes in version 0.0.7 - 2004-06-07 o Fixes for crashes and other obnoxious bugs: - Fix an epipe bug: sometimes when directory connections failed to connect, we would give them a chance to flush before closing them. - When we detached from a circuit because of resolvefailed, we would immediately try the same circuit twice more, and then give up on the resolve thinking we'd tried three different exit nodes. - Limit the number of intro circuits we'll attempt to build for a hidden service per 15-minute period. - Check recommended-software string *early*, before actually parsing the directory. Thus we can detect an obsolete version and exit, even if the new directory format doesn't parse. o Fixes for security bugs: - Remember which nodes are dirservers when you startup, and if a random OR enables his dirport, don't automatically assume he's a trusted dirserver. o Other bugfixes: - Directory connections were asking the wrong poll socket to start writing, and not asking themselves to start writing. - When we detached from a circuit because we sent a begin but didn't get a connected, we would use it again the first time; but after that we would correctly switch to a different one. - Stop warning when the first onion decrypt attempt fails; they will sometimes legitimately fail now that we rotate keys. - Override unaligned-access-ok check when $host_cpu is ia64 or arm. Apparently they allow it but the kernel whines. - Dirservers try to reconnect periodically too, in case connections have failed. - Fix some memory leaks in directory servers. - Allow backslash in Win32 filenames. - Made Tor build complain-free on FreeBSD, hopefully without breaking other BSD builds. We'll see. - Check directory signatures based on name of signer, not on whom we got the directory from. This will let us cache directories more easily. - Rotate dnsworkers and cpuworkers on SIGHUP, so they get new config settings too. o Features: - Doxygen markup on all functions and global variables. - Make directory functions update routerlist, not replace it. So now directory disagreements are not so critical a problem. - Remove the upper limit on number of descriptors in a dirserver's directory (not that we were anywhere close). - Allow multiple logfiles at different severity ranges. - Allow *BindAddress to specify ":port" rather than setting *Port separately. Allow multiple instances of each BindAddress config option, so you can bind to multiple interfaces if you want. - Allow multiple exit policy lines, which are processed in order. Now we don't need that huge line with all the commas in it. - Enable accept/reject policies on SOCKS connections, so you can bind to 0.0.0.0 but still control who can use your OP. - Updated the man page to reflect these features. Changes in version 0.0.6.2 - 2004-05-16 o Our integrity-checking digest was checking only the most recent cell, not the previous cells like we'd thought. Thanks to Stefan Mark for finding the flaw! Changes in version 0.0.6.1 - 2004-05-06 o Fix two bugs in our AES counter-mode implementation (this affected onion-level stream encryption, but not TLS-level). It turns out we were doing something much more akin to a 16-character polyalphabetic cipher. Oops. Thanks to Stefan Mark for finding the flaw! o Retire moria3 as a directory server, and add tor26 as a directory server. Changes in version 0.0.6 - 2004-05-02 o Features: - Hidden services and rendezvous points are implemented. Go to http://6sxoyfb3h2nvok2d.onion/ for an index of currently available hidden services. (This only works via a socks4a proxy such as Privoxy, and currently it's quite slow.) - We now rotate link (tls context) keys and onion keys. - CREATE cells now include oaep padding, so you can tell if you decrypted them correctly. - Retry stream correctly when we fail to connect because of exit-policy-reject (should try another) or can't-resolve-address. - When we hup a dirserver and we've *removed* a server from the approved-routers list, now we remove that server from the in-memory directories too. - Add bandwidthburst to server descriptor. - Directories now say which dirserver signed them. - Use a tor_assert macro that logs failed assertions too. - Since we don't support truncateds much, don't bother sending them; just close the circ. - Fetch randomness from /dev/urandom better (not via fopen/fread) - Better debugging for tls errors - Set Content-Type on the directory and hidserv descriptor. - Remove IVs from cipher code, since AES-ctr has none. o Bugfixes: - Fix an assert trigger for exit nodes that's been plaguing us since the days of 0.0.2prexx (thanks weasel!) - Fix a bug where we were closing tls connections intermittently. It turns out openssl keeps its errors around -- so if an error happens, and you don't ask about it, and then another openssl operation happens and succeeds, and you ask if there was an error, it tells you about the first error. - Fix a bug that's been lurking since 27 may 03 (!) When passing back a destroy cell, we would use the wrong circ id. - Don't crash if a conn that sent a begin has suddenly lost its circuit. - Some versions of openssl have an SSL_pending function that erroneously returns bytes when there is a non-application record pending. - Win32 fixes. Tor now compiles on win32 with no warnings/errors. o We were using an array of length zero in a few places. o Win32's gethostbyname can't resolve an IP to an IP. o Win32's close can't close a socket. o Handle windows socket errors correctly. o Portability: - check for so we build on FreeBSD again, and for NetBSD. Changes in version 0.0.5 - 2004-03-30 o Install torrc as torrc.sample -- we no longer clobber your torrc. (Woo!) o Fix mangled-state bug in directory fetching (was causing sigpipes). o Only build circuits after we've fetched the directory: clients were using only the directory servers before they'd fetched a directory. This also means longer startup time; so it goes. o Fix an assert trigger where an OP would fail to handshake, and we'd expect it to have a nickname. o Work around a tsocks bug: do a socks reject when AP connection dies early, else tsocks goes into an infinite loop. o Hold socks connection open until reply is flushed (if possible) o Make exit nodes resolve IPs to IPs immediately, rather than asking the dns farm to do it. o Fix c99 aliasing warnings in rephist.c o Don't include server descriptors that are older than 24 hours in the directory. o Give socks 'reject' replies their whole 15s to attempt to flush, rather than seeing the 60s timeout and assuming the flush had failed. o Clean automake droppings from the cvs repository o Add in a 'notice' log level for things the operator should hear but that aren't warnings Changes in version 0.0.4 - 2004-03-26 o When connecting to a dirserver or OR and the network is down, we would crash. Changes in version 0.0.3 - 2004-03-26 o Warn and fail if server chose a nickname with illegal characters o Port to Solaris and Sparc: - include missing header fcntl.h - have autoconf find -lsocket -lnsl automatically - deal with hardware word alignment - make uname() work (solaris has a different return convention) - switch from using signal() to sigaction() o Preliminary work on reputation system: - Keep statistics on success/fail of connect attempts; they're published by kill -USR1 currently. - Add a RunTesting option to try to learn link state by creating test circuits, even when SocksPort is off. - Remove unused open circuits when there are too many. Changes in version 0.0.2 - 2004-03-19 - Include strlcpy and strlcat for safer string ops - define INADDR_NONE so we compile (but still not run) on solaris Changes in version 0.0.2pre27 - 2004-03-14 o Bugfixes: - Allow internal tor networks (we were rejecting internal IPs, now we allow them if they're set explicitly). - And fix a few endian issues. Changes in version 0.0.2pre26 - 2004-03-14 o New features: - If a stream times out after 15s without a connected cell, don't try that circuit again: try a new one. - Retry streams at most 4 times. Then give up. - When a dirserver gets a descriptor from an unknown router, it logs its fingerprint (so the dirserver operator can choose to accept it even without mail from the server operator). - Inform unapproved servers when we reject their descriptors. - Make tor build on Windows again. It works as a client, who knows about as a server. - Clearer instructions in the torrc for how to set up a server. - Be more efficient about reading fd's when our global token bucket (used for rate limiting) becomes empty. o Bugfixes: - Stop asserting that computers always go forward in time. It's simply not true. - When we sent a cell (e.g. destroy) and then marked an OR connection expired, we might close it before finishing a flush if the other side isn't reading right then. - Don't allow dirservers to start if they haven't defined RecommendedVersions - We were caching transient dns failures. Oops. - Prevent servers from publishing an internal IP as their address. - Address a strcat vulnerability in circuit.c Changes in version 0.0.2pre25 - 2004-03-04 o New features: - Put the OR's IP in its router descriptor, not its fqdn. That way we'll stop being stalled by gethostbyname for nodes with flaky dns, e.g. poblano. o Bugfixes: - If the user typed in an address that didn't resolve, the server crashed. Changes in version 0.0.2pre24 - 2004-03-03 o Bugfixes: - Fix an assertion failure in dns.c, where we were trying to dequeue a pending dns resolve even if it wasn't pending - Fix a spurious socks5 warning about still trying to write after the connection is finished. - Hold certain marked_for_close connections open until they're finished flushing, rather than losing bytes by closing them too early. - Correctly report the reason for ending a stream - Remove some duplicate calls to connection_mark_for_close - Put switch_id and start_daemon earlier in the boot sequence, so it will actually try to chdir() to options.DataDirectory - Make 'make test' exit(1) if a test fails; fix some unit tests - Make tor fail when you use a config option it doesn't know about, rather than warn and continue. - Make --version work - Bugfixes on the rpm spec file and tor.sh, so it's more up to date Changes in version 0.0.2pre23 - 2004-02-29 o New features: - Print a statement when the first circ is finished, so the user knows it's working. - If a relay cell is unrecognized at the end of the circuit, send back a destroy. (So attacks to mutate cells are more clearly thwarted.) - New config option 'excludenodes' to avoid certain nodes for circuits. - When it daemonizes, it chdir's to the DataDirectory rather than "/", so you can collect coredumps there. o Bugfixes: - Fix a bug in tls flushing where sometimes data got wedged and didn't flush until more data got sent. Hopefully this bug was a big factor in the random delays we were seeing. - Make 'connected' cells include the resolved IP, so the client dns cache actually gets populated. - Disallow changing from ORPort=0 to ORPort>0 on hup. - When we time-out on a stream and detach from the circuit, send an end cell down it first. - Only warn about an unknown router (in exitnodes, entrynodes, excludenodes) after we've fetched a directory. Changes in version 0.0.2pre22 - 2004-02-26 o New features: - Servers publish less revealing uname information in descriptors. - More memory tracking and assertions, to crash more usefully when errors happen. - If the default torrc isn't there, just use some default defaults. Plus provide an internal dirservers file if they don't have one. - When the user tries to use Tor as an http proxy, give them an http 501 failure explaining that we're a socks proxy. - Dump a new router.desc on hup, to help confused people who change their exit policies and then wonder why router.desc doesn't reflect it. - Clean up the generic tor.sh init script that we ship with. o Bugfixes: - If the exit stream is pending on the resolve, and a destroy arrives, then the stream wasn't getting removed from the pending list. I think this was the one causing recent server crashes. - Use a more robust poll on OSX 10.3, since their poll is flaky. - When it couldn't resolve any dirservers, it was useless from then on. Now it reloads the RouterFile (or default dirservers) if it has no dirservers. - Move the 'tor' binary back to /usr/local/bin/ -- it turns out many users don't even *have* a /usr/local/sbin/. Changes in version 0.0.2pre21 - 2004-02-18 o New features: - There's a ChangeLog file that actually reflects the changelog. - There's a 'torify' wrapper script, with an accompanying tor-tsocks.conf, that simplifies the process of using tsocks for tor. It even has a man page. - The tor binary gets installed to sbin rather than bin now. - Retry streams where the connected cell hasn't arrived in 15 seconds - Clean up exit policy handling -- get the default out of the torrc, so we can update it without forcing each server operator to fix his/her torrc. - Allow imaps and pop3s in default exit policy o Bugfixes: - Prevent picking middleman nodes as the last node in the circuit Changes in version 0.0.2pre20 - 2004-01-30 o New features: - We now have a deb package, and it's in debian unstable. Go to it, apt-getters. :) - I've split the TotalBandwidth option into BandwidthRate (how many bytes per second you want to allow, long-term) and BandwidthBurst (how many bytes you will allow at once before the cap kicks in). This better token bucket approach lets you, say, set BandwidthRate to 10KB/s and BandwidthBurst to 10MB, allowing good performance while not exceeding your monthly bandwidth quota. - Push out a tls record's worth of data once you've got it, rather than waiting until you've read everything waiting to be read. This may improve performance by pipelining better. We'll see. - Add an AP_CONN_STATE_CONNECTING state, to allow streams to detach from failed circuits (if they haven't been connected yet) and attach to new ones. - Expire old streams that haven't managed to connect. Some day we'll have them reattach to new circuits instead. o Bugfixes: - Fix several memory leaks that were causing servers to become bloated after a while. - Fix a few very rare assert triggers. A few more remain. - Setuid to User _before_ complaining about running as root. Changes in version 0.0.2pre19 - 2004-01-07 o Bugfixes: - Fix deadlock condition in dns farm. We were telling a child to die by closing the parent's file descriptor to him. But newer children were inheriting the open file descriptor from the parent, and since they weren't closing it, the socket never closed, so the child never read eof, so he never knew to exit. Similarly, dns workers were holding open other sockets, leading to all sorts of chaos. - New cleaner daemon() code for forking and backgrounding. - If you log to a file, it now prints an entry at the top of the logfile so you know it's working. - The onionskin challenge length was 30 bytes longer than necessary. - Started to patch up the spec so it's not quite so out of date. Changes in version 0.0.2pre18 - 2004-01-02 o Bugfixes: - Fix endian issues with the 'integrity' field in the relay header. - Fix a potential bug where connections in state AP_CONN_STATE_CIRCUIT_WAIT might unexpectedly ask to write. Changes in version 0.0.2pre17 - 2003-12-30 o Bugfixes: - Made --debuglogfile (or any second log file, actually) work. - Resolved an edge case in get_unique_circ_id_by_conn where a smart adversary could force us into an infinite loop. o Features: - Each onionskin handshake now includes a hash of the computed key, to prove the server's identity and help perfect forward secrecy. - Changed cell size from 256 to 512 bytes (working toward compatibility with MorphMix). - Changed cell length to 2 bytes, and moved it to the relay header. - Implemented end-to-end integrity checking for the payloads of relay cells. - Separated streamid from 'recognized' (otherwise circuits will get messed up when we try to have streams exit from the middle). We use the integrity-checking to confirm that a cell is addressed to this hop. - Randomize the initial circid and streamid values, so an adversary who breaks into a node can't learn how many circuits or streams have been made so far. Changes in version 0.0.2pre16 - 2003-12-14 o Bugfixes: - Fixed a bug that made HUP trigger an assert - Fixed a bug where a circuit that immediately failed wasn't being counted as a failed circuit in counting retries. o Features: - Now we close the circuit when we get a truncated cell: otherwise we're open to an anonymity attack where a bad node in the path truncates the circuit and then we open streams at him. - Add port ranges to exit policies - Add a conservative default exit policy - Warn if you're running tor as root - on HUP, retry OR connections and close/rebind listeners - options.EntryNodes: try these nodes first when picking the first node - options.ExitNodes: if your best choices happen to include any of your preferred exit nodes, you choose among just those preferred exit nodes. - options.ExcludedNodes: nodes that are never picked in path building Changes in version 0.0.2pre15 - 2003-12-03 o Robustness and bugfixes: - Sometimes clients would cache incorrect DNS resolves, which would really screw things up. - An OP that goes offline would slowly leak all its sockets and stop working. - A wide variety of bugfixes in exit node selection, exit policy handling, and processing pending streams when a new circuit is established. - Pick nodes for a path only from those the directory says are up - Choose randomly from all running dirservers, not always the first one - Increase allowed http header size for directory fetch. - Stop writing to stderr (if we're daemonized it will be closed). - Enable -g always, so cores will be more useful to me. - Switch "-lcrypto -lssl" to "-lssl -lcrypto" for broken distributions. o Documentation: - Wrote a man page. It lists commonly used options. o Configuration: - Change default loglevel to warn. - Make PidFile default to null rather than littering in your CWD. - OnionRouter config option is now obsolete. Instead it just checks ORPort>0. - Moved to a single unified torrc file for both clients and servers. Changes in version 0.0.2pre14 - 2003-11-29 o Robustness and bugfixes: - Force the admin to make the DataDirectory himself - to get ownership/permissions right - so clients no longer make a DataDirectory and then never use it - fix bug where a client who was offline for 45 minutes would never pull down a directory again - fix (or at least hide really well) the dns assert bug that was causing server crashes - warnings and improved robustness wrt clockskew for certs - use the native daemon(3) to daemonize, when available - exit if bind() fails - exit if neither socksport nor orport is defined - include our own tor_timegm (Win32 doesn't have its own) - bugfix for win32 with lots of connections - fix minor bias in PRNG - make dirserver more robust to corrupt cached directory o Documentation: - Wrote the design document (woo) o Circuit building and exit policies: - Circuits no longer try to use nodes that the directory has told them are down. - Exit policies now support bitmasks (18.0.0.0/255.0.0.0) and bitcounts (18.0.0.0/8). - Make AP connections standby for a circuit if no suitable circuit exists, rather than failing - Circuits choose exit node based on addr/port, exit policies, and which AP connections are standing by - Bump min pathlen from 2 to 3 - Relay end cells have a payload to describe why the stream ended. - If the stream failed because of exit policy, try again with a new circuit. - Clients have a dns cache to remember resolved addresses. - Notice more quickly when we have no working circuits o Configuration: - APPort is now called SocksPort - SocksBindAddress, ORBindAddress, DirBindAddress let you configure where to bind - RecommendedVersions is now a config variable rather than hardcoded (for dirservers) - Reloads config on HUP - Usage info on -h or --help - If you set User and Group config vars, it'll setu/gid to them. Changes in version 0.0.2pre13 - 2003-10-19 o General stability: - SSL_write no longer fails when it returns WANTWRITE and the number of bytes in the buf has changed by the next SSL_write call. - Fix segfault fetching directory when network is down - Fix a variety of minor memory leaks - Dirservers reload the fingerprints file on HUP, so I don't have to take down the network when I approve a new router - Default server config file has explicit Address line to specify fqdn o Buffers: - Buffers grow and shrink as needed (Cut process size from 20M to 2M) - Make listener connections not ever alloc bufs o Autoconf improvements: - don't clobber an external CFLAGS in ./configure - Make install now works - create var/lib/tor on make install - autocreate a tor.sh initscript to help distribs - autocreate the torrc and sample-server-torrc with correct paths o Log files and Daemonizing now work: - If --DebugLogFile is specified, log to it at -l debug - If --LogFile is specified, use it instead of commandline - If --RunAsDaemon is set, tor forks and backgrounds on startup