$Id$ Tor directory protocol, version 2 0. Scope and preliminaries This directory protocol is used by Tor version 0.1.1.x and later. See dir-spec-v1.txt for information on earlier versions. 0.1. Goals and motivation There were several problems with the way Tor handles directory information in version 0.1.0.x and earlier. Here are the problems we try to fix with this new design, already implemented in 0.1.1.x: 1. Directories were very large and use up a lot of bandwidth: clients downloaded descriptors for all router several times an hour. 2. Every directory authority was a trust bottleneck: if a single directory authority lied, it could make clients believe for a time an arbitrarily distorted view of the Tor network. 3. Our current "verified server" system is kind of nonsensical. 4. Getting more directory authorities would add more points of failure and worsen possible partitioning attacks. There are two problems that remain unaddressed by this design. 5. Requiring every client to know about every router won't scale. 6. Requiring every directory cache to know every router won't scale. We attempt to fix 1-4 here, and to build a solution that will work when we figure out an answer for 5. We haven't thought at all about what to do about 6. 1. Outline There is a small set (say, around 10) of semi-trusted directory authorities. A default list of authorities is shipped with the Tor software. Users can change this list, but are encouraged not to do so, in order to avoid partitioning attacks. Routers periodically upload signed "descriptors" to the directory authorities describing their keys, capabilities, and other information. Routers may act as directory mirrors (also called "caches"), to reduce load on the directory authorities. They announce this in their descriptors. Each directory authority periodically generates and signs a compact "network status" document that lists that authority's view of the current descriptors and status for known routers, but which does not include the descriptors themselves. Directory mirrors download, cache, and re-serve network-status documents to clients. Clients, directory mirrors, and directory authorities all use network-status documents to find out when their list of routers is out-of-date. If it is, they download any missing router descriptors. Clients download missing descriptors from mirrors; mirrors and authorities download from authorities. Descriptors are downloaded by the hash of the descriptor, not by the server's identity key: this prevents servers from attacking clients by giving them descriptors nobody else uses. All directory information is uploaded and downloaded with HTTP. Coordination among directory authorities is done client-side: clients compute a vote-like algorithm among the network-status documents they have, and base their decisions on the result. 1.1. What's different from 0.1.0.x? Clients used to download a signed concatenated set of router descriptors (called a "directory") from directory mirrors, regardless of which descriptors had changed. Between downloading directories, clients would download "network-status" documents that would list which servers were supposed to running. Clients would always believe the most recently published network-status document they were served. Routers used to upload fresh descriptors all the time, whether their keys and other information had changed or not. 1.2. Document meta-format Router descriptors, directories, and running-routers documents all obey the following lightweight extensible information format. The highest level object is a Document, which consists of one or more Items. Every Item begins with a KeywordLine, followed by one or more Objects. A KeywordLine begins with a Keyword, optionally followed by whitespace and more non-newline characters, and ends with a newline. A Keyword is a sequence of one or more characters in the set [A-Za-z0-9-]. An Object is a block of encoded data in pseudo-Open-PGP-style armor. (cf. RFC 2440) More formally: Document ::= (Item | NL)+ Item ::= KeywordLine Object* KeywordLine ::= Keyword NL | Keyword WS ArgumentsChar+ NL Keyword = KeywordChar+ KeywordChar ::= 'A' ... 'Z' | 'a' ... 'z' | '0' ... '9' | '-' ArgumentChar ::= any printing ASCII character except NL. WS = (SP | TAB)+ Object ::= BeginLine Base-64-encoded-data EndLine BeginLine ::= "-----BEGIN " Keyword "-----" NL EndLine ::= "-----END " Keyword "-----" NL The BeginLine and EndLine of an Object must use the same keyword. When interpreting a Document, software MUST ignore any KeywordLine that starts with a keyword it doesn't recognize; future implementations MUST NOT require current clients to understand any KeywordLine not currently described. The "opt" keyword was used until Tor 0.1.2.5-alpha for non-critical future extensions. All implementations MUST ignore any item of the form "opt keyword ....." when they would not recognize "keyword ....."; and MUST treat "opt keyword ....." as synonymous with "keyword ......" when keyword is recognized. Implementations before 0.1.2.5-alpha rejected any document with a KeywordLine that started with a keyword that they didn't recognize. Implementations MUST prefix items not recognized by older versions of Tor with an "opt" until those versions of Tor are obsolete. 2. Router operation ORs SHOULD generate a new router descriptor whenever any of the following events have occurred: - A period of time (18 hrs by default) has passed since the last time a descriptor was generated. - A descriptor field other than bandwidth or uptime has changed. - Bandwidth has changed by more than +/- 50% from the last time a descriptor was generated, and at least a given interval of time (20 mins by default) has passed since then. - Its uptime has been reset (by restarting). After generating a descriptor, ORs upload it to every directory authority they know, by posting it to the URL http:///tor/ 2.1. Router descriptor format Every router descriptor MUST start with a "router" Item; MUST end with a "router-signature" Item and an extra NL; and MUST contain exactly one instance of each of the following Items: "published" "onion-key" "link-key" "signing-key" "bandwidth". Additionally, a router descriptor MAY contain any number of "accept", "reject", "fingerprint", "uptime", and "opt" Items. Other than "router" and "router-signature", the items may appear in any order. The items' formats are as follows: "router" nickname address ORPort SocksPort DirPort Indicates the beginning of a router descriptor. "address" must be an IPv4 address in dotted-quad format. The last three numbers indicate the TCP ports at which this OR exposes functionality. ORPort is a port at which this OR accepts TLS connections for the main OR protocol; SocksPort is deprecated and should always be 0; and DirPort is the port at which this OR accepts directory-related HTTP connections. If any port is not supported, the value 0 is given instead of a port number. "bandwidth" bandwidth-avg bandwidth-burst bandwidth-observed Estimated bandwidth for this router, in bytes per second. The "average" bandwidth is the volume per second that the OR is willing to sustain over long periods; the "burst" bandwidth is the volume that the OR is willing to sustain in very short intervals. The "observed" value is an estimate of the capacity this server can handle. The server remembers the max bandwidth sustained output over any ten second period in the past day, and another sustained input. The "observed" value is the lesser of these two numbers. "platform" string A human-readable string describing the system on which this OR is running. This MAY include the operating system, and SHOULD include the name and version of the software implementing the Tor protocol. "published" YYYY-MM-DD HH:MM:SS The time, in GMT, when this descriptor was generated. "fingerprint" A fingerprint (a HASH_LEN-byte of asn1 encoded public key, encoded in hex, with a single space after every 4 characters) for this router's identity key. A descriptor is considered invalid (and MUST be rejected) if the fingerprint line does not match the public key. [We didn't start parsing this line until Tor 0.1.0.6-rc; it should be marked with "opt" until earlier versions of Tor are obsolete.] "hibernating" 0|1 If the value is 1, then the Tor server was hibernating when the descriptor was published, and shouldn't be used to build circuits. [We didn't start parsing this line until Tor 0.1.0.6-rc; it should be marked with "opt" until earlier versions of Tor are obsolete.] "uptime" The number of seconds that this OR process has been running. "onion-key" NL a public key in PEM format This key is used to encrypt EXTEND cells for this OR. The key MUST be accepted for at least 1 week after any new key is published in a subsequent descriptor. "signing-key" NL a public key in PEM format The OR's long-term identity key. "accept" exitpattern "reject" exitpattern These lines describe the rules that an OR follows when deciding whether to allow a new stream to a given address. The 'exitpattern' syntax is described below. The rules are considered in order; if no rule matches, the address will be accepted. For clarity, the last such entry SHOULD be accept *:* or reject *:*. "router-signature" NL Signature NL The "SIGNATURE" object contains a signature of the PKCS1-padded hash of the entire router descriptor, taken from the beginning of the "router" line, through the newline after the "router-signature" line. The router descriptor is invalid unless the signature is performed with the router's identity key. "contact" info NL Describes a way to contact the server's administrator, preferably including an email address and a PGP key fingerprint. "family" names NL 'Names' is a space-separated list of server nicknames or hexdigests. If two ORs list one another in their "family" entries, then OPs should treat them as a single OR for the purpose of path selection. For example, if node A's descriptor contains "family B", and node B's descriptor contains "family A", then node A and node B should never be used on the same circuit. "read-history" YYYY-MM-DD HH:MM:SS (NSEC s) NUM,NUM,NUM,NUM,NUM... NL "write-history" YYYY-MM-DD HH:MM:SS (NSEC s) NUM,NUM,NUM,NUM,NUM... NL Declare how much bandwidth the OR has used recently. Usage is divided into intervals of NSEC seconds. The YYYY-MM-DD HH:MM:SS field defines the end of the most recent interval. The numbers are the number of bytes used in the most recent intervals, ordered from oldest to newest. [We didn't start parsing these lines until Tor 0.1.0.6-rc; they should be marked with "opt" until earlier versions of Tor are obsolete.] "eventdns" bool NL Declare whether this version of Tor is using the newer enhanced dns logic. Versions of Tor without eventdns SHOULD NOT be used for reverse hostname lookups. [All versions of Tor before 0.1.2.2-alpha should be assumed to have this option set to 0 if it is not present. All Tor versions at 0.1.2.2-alpha or later should be assumed to have this option set to 1 if it is not present. Until 0.1.2.1-alpha-dev, this option was not generated, even when eventdns was in use. Versions of Tor before 0.1.2.1-alpha-dev did not parse this option, so it should be marked "opt". With some future version, the old 'dnsworker' logic will be removed, rendering this option of historical interest only.] 2.2. Nonterminals in router descriptors nickname ::= between 1 and 19 alphanumeric characters, case-insensitive. hexdigest ::= a '$', followed by 20 hexadecimal characters. [Represents a server by the digest of its identity key.] exitpattern ::= addrspec ":" portspec portspec ::= "*" | port | port "-" port port ::= an integer between 1 and 65535, inclusive. [Some implementations incorrectly generate ports with value 0. Implementations SHOULD accept this, and SHOULD NOT generate it.] addrspec ::= "*" | ip4spec | ip6spec ipv4spec ::= ip4 | ip4 "/" num_ip4_bits | ip4 "/" ip4mask ip4 ::= an IPv4 address in dotted-quad format ip4mask ::= an IPv4 mask in dotted-quad format num_ip4_bits ::= an integer between 0 and 32 ip6spec ::= ip6 | ip6 "/" num_ip6_bits ip6 ::= an IPv6 address, surrounded by square brackets. num_ip6_bits ::= an integer between 0 and 128 bool ::= "0" | "1" Ports are required; if they are not included in the router line, they must appear in the "ports" lines. 3. Network status format Directory authorities generate, sign, and compress network-status documents. Directory servers SHOULD generate a fresh network-status document when the contents of such a document would be different from the last one generated, and some time (at least one second, possibly longer) has passed since the last one was generated. The network status document contains a preamble, a set of router status entries, and a signature, in that order. We use the same meta-format as used for directories and router descriptors in "tor-spec.txt". Implementations MAY insert blank lines for clarity between sections; these blank lines are ignored. Implementations MUST NOT depend on blank lines in any particular location. As used here, "whitespace" is a sequence of 1 or more tab or space characters. The preamble contains: "network-status-version" -- A document format version. For this specification, the version is "2". "dir-source" -- The authority's hostname, current IP address, and directory port, all separated by whitespace. "fingerprint" -- A base16-encoded hash of the signing key's fingerprint, with no additional spaces added. "contact" -- An arbitrary string describing how to contact the directory server's administrator. Administrators should include at least an email address and a PGP fingerprint. "dir-signing-key" -- The directory server's public signing key. "client-versions" -- A comma-separated list of recommended client versions. "server-versions" -- A comma-separated list of recommended server versions. "published" -- The publication time for this network-status object. "dir-options" -- A set of flags, in any order, separated by whitespace: "Names" if this directory authority performs name bindings. "Versions" if this directory authority recommends software versions. "BadExits" if the directory authority flags nodes that it believes are performing incorrectly as exit nodes. "BadDirectories" if the directory authority flags nodes that it believes are performing incorrectly as directory caches. The dir-options entry is optional. The "-versions" entries are required if the "Versions" flag is present. The other entries are required and must appear exactly once. The "network-status-version" entry must appear first; the others may appear in any order. Implementations MUST ignore additional arguments to the items above, and MUST ignore unrecognized flags. For each router, the router entry contains: (This format is designed for conciseness.) "r" -- followed by the following elements, in order, separated by whitespace: - The OR's nickname, - A hash of its identity key, encoded in base64, with trailing = signs removed. - A hash of its most recent descriptor, encoded in base64, with trailing = signs removed. (The hash is calculated as for computing the signature of a descriptor.) - The publication time of its most recent descriptor, in the form YYYY-MM-DD HH:MM:SS, in GMT. - An IP address - An OR port - A directory port (or "0" for none") "s" -- A series of whitespace-separated status flags, in any order: "Authority" if the router is a directory authority. "BadExit" if the router is believed to be useless as an exit node (because its ISP censors it, because it is behind a restrictive proxy, or for some similar reason). "BadDirectory" if the router is believed to be useless as a directory cache (because its directory port isn't working, its bandwidth is always throttled, or for some similar reason). "Exit" if the router is useful for building general-purpose exit circuits. "Fast" if the router is suitable for high-bandwidth circuits. "Guard" if the router is suitable for use as an entry guard. "Named" if the router's identity-nickname mapping is canonical, and this authority binds names. "Stable" if the router is suitable for long-lived circuits. "Running" if the router is currently usable. "Valid" if the router has been 'validated'. "V2Dir" if the router implements this protocol. "v" -- The version of the Tor protocol that this server is running. If the value begins with "Tor" SP, the rest of the string is a Tor version number, and the protocol is "The Tor protocol as supported by the given version of Tor." Otherwise, if the value begins with some other string, Tor has upgraded to a more sophisticated protocol versioning system, and the protocol is "a version of the Tor protocol more recent than any we recognize." The "r" entry for each router must appear first and is required. The "s" entry is optional (see Section 3.1 below for how the flags are decided). Unrecognized flags on the "s" line and extra elements on the "r" line must be ignored. The "v" line is optional; it was not supported until 0.1.2.5-alpha, and it must be preceded with an "opt" until all earlier versions of Tor are obsolete. The signature section contains: "directory-signature" nickname-of-dirserver NL Signature Signature is a signature of this network-status document (the document up until the signature, including the line "directory-signature \n"), using the directory authority's signing key. We compress the network status list with zlib before transmitting it. 3.1. Establishing server status (This section describes how directory authorities choose which status flags to apply to routers, as of Tor 0.1.1.18-rc. Later directory authorities MAY do things differently, so long as clients keep working well. Clients MUST NOT depend on the exact behaviors in this section.) In the below definitions, a router is considered "active" if it is running, valid, and not hibernating. "Valid" -- a router is 'Valid' if it is running a version of Tor not known to be broken, and the directory authority has not blacklisted it as suspicious. "Named" -- Directory authority administrators may decide to support name binding. If they do, then they must maintain a file of nickname-to-identity-key mappings, and try to keep this file consistent with other directory authorities. If they don't, they act as clients, and report bindings made by other directory authorities (name X is bound to identity Y if at least one binding directory lists it, and no directory binds X to some other Y'.) A router is called 'Named' if the router believes the given name should be bound to the given key. "Running" -- A router is 'Running' if the authority managed to connect to it successfully within the last 30 minutes. "Stable" -- A router is 'Stable' if it is active, and either its uptime is at least the median uptime for known active routers, or its uptime is at least 30 days. Routers are never called stable if they are running a version of Tor known to drop circuits stupidly. (0.1.1.10-alpha through 0.1.1.16-rc are stupid this way.) "Fast" -- A router is 'Fast' if it is active, and its bandwidth is in the top 7/8ths for known active routers. "Guard" -- A router is a possible 'Guard' if it is 'Stable' and its bandwidth is above median for known active routers. If the total bandwidth of active non-BadExit Exit servers is less than one third of the total bandwidth of all active servers, no Exit is listed as a Guard. "Authority" -- A router is called an 'Authority' if the authority generating the network-status document believes it is an authority. "V2Dir" -- A router supports the v2 directory protocol if it has an open directory port, and it is running a version of the directory protocol that supports the functionality clients need. (Currently, this is 0.1.1.9-alpha or later.) Directory server administrators may label some servers or IPs as blacklisted, and elect not to include them in their network-status lists. Thus, the network-status list includes all non-blacklisted, non-expired, non-superseded descriptors. 4. Directory server operation All directory authorities and directory mirrors ("directory servers") implement this section, except as noted. 4.1. Accepting uploads (authorities only) When a router posts a signed descriptor to a directory authority, the authority first checks whether it is well-formed and correctly self-signed. If it is, the authority next verifies that the nickname question is already assigned to a router with a different public key. Finally, the authority MAY check that the router is not blacklisted because of its key, IP, or another reason. If the descriptor passes these tests, and the authority does not already have a descriptor for a router with this public key, it accepts the descriptor and remembers it. If the authority _does_ have a descriptor with the same public key, the newly uploaded descriptor is remembered if its publication time is more recent than the most recent old descriptor for that router, and either: - There are non-cosmetic differences between the old descriptor and the new one. - Enough time has passed between the descriptors' publication times. (Currently, 12 hours.) Differences between router descriptors are "non-cosmetic" if they would be sufficient to force an upload as described in section 2 above. Note that the "cosmetic difference" test only applies to uploaded descriptors, not to descriptors that the authority downloads from other authorities. 4.2. Downloading network-status documents (authorities and caches) All directory servers (authorities and mirrors) try to keep a fresh set of network-status documents from every authority. To do so, every 5 minutes, each authority asks every other authority for its most recent network-status document. Every 15 minutes, each mirror picks a random authority and asks it for the most recent network-status documents for all the authorities the authority knows about (including the chosen authority itself). Directory servers and mirrors remember and serve the most recent network-status document they have from each authority. Other network-status documents don't need to be stored. If the most recent network-status document is over 10 days old, it is discarded anyway. Mirrors SHOULD store and serve network-status documents from authorities they don't recognize, but SHOULD NOT use such documents for any other purpose. Mirrors SHOULD discard network-status documents older than 48 hours. 4.3. Downloading and storing router descriptors (authorities and caches) Periodically (currently, every 10 seconds), directory servers check whether there are any specific descriptors (as identified by descriptor hash in a network-status document) that they do not have and that they are not currently trying to download. If so, the directory server launches requests to the authorities for these descriptors, such that each authority is only asked for descriptors listed in its most recent network-status. When more than one authority lists the descriptor, we choose which to ask at random. If one of these downloads fails, we do not try to download that descriptor from the authority that failed to serve it again unless we receive a newer network-status from that authority that lists the same descriptor. Directory servers must potentially cache multiple descriptors for each router. Servers must not discard any descriptor listed by any current network-status document from any authority. If there is enough space to store additional descriptors, servers SHOULD try to hold those which clients are likely to download the most. (Currently, this is judged based on the interval for which each descriptor seemed newest.) Authorities SHOULD NOT download descriptors for routers that they would immediately reject for reasons listed in 3.1. 4.4. HTTP URLs "Fingerprints" in these URLs are base-16-encoded SHA1 hashes. The authoritative network-status published by a host should be available at: http:///tor/status/authority.z The network-status published by a host with fingerprint should be available at: http:///tor/status/fp/.z The network-status documents published by hosts with fingerprints ,, should be available at: http:///tor/status/fp/++.z The most recent network-status documents from all known authorities, concatenated, should be available at: http:///tor/status/all.z The most recent descriptor for a server whose identity key has a fingerprint of should be available at: http:///tor/server/fp/.z The most recent descriptors for servers with identity fingerprints ,, should be available at: http:///tor/server/fp/++.z (NOTE: Implementations SHOULD NOT download descriptors by identity key fingerprint. This allows a corrupted server (in collusion with a cache) to provide a unique descriptor to a client, and thereby partition that client from the rest of the network.) The server descriptor with (descriptor) digest (in hex) should be available at: http:///tor/server/d/.z The most recent descriptors with digests ,, should be available at: http:///tor/server/d/++.z The most recent descriptor for this server should be at: http:///tor/server/authority.z [Nothing in the Tor protocol uses this resource yet, but it is useful for debugging purposes. Also, the official Tor implementations (starting at 0.1.1.x) use this resource to test whether a server's own DirPort is reachable.] A concatenated set of the most recent descriptors for all known servers should be available at: http:///tor/server/all.z For debugging, directories SHOULD expose non-compressed objects at URLs like the above, but without the final ".z". Clients MUST handle compressed concatenated information in two forms: - A concatenated list of zlib-compressed objects. - A zlib-compressed concatenated list of objects. Directory servers MAY generate either format: the former requires less CPU, but the latter requires less bandwidth. Clients SHOULD use upper case letters (A-F) when base16-encoding fingerprints. Servers MUST accept both upper and lower case fingerprints in requests. 5. Client operation: downloading information Every Tor that is not a directory server (that is, those that do not have a DirPort set) implements this section. 5.1. Downloading network-status documents Each client maintains an ordered list of directory authorities. Insofar as possible, clients SHOULD all use the same ordered list. For each network-status document a client has, it keeps track of its publication time *and* the time when the client retrieved it. Clients consider a network-status document "live" if it was published within the last 24 hours. Clients try to have a live network-status document hours from *every* authority, and try to periodically get new network-status documents from each authority in rotation as follows: If a client is missing a live network-status document for any authority, it tries to fetch it from a directory cache. On failure, the client waits briefly, then tries that network-status document again from another cache. The client does not build circuits until it has live network-status documents from more than half the authorities it trusts, and it has descriptors for more than 1/4 of the routers that it believes are running. If the most recently _retrieved_ network-status document is over 30 minutes old, the client attempts to download a network-status document. When choosing which documents to download, clients treat their list of directory authorities as a circular ring, and begin with the authority appearing immediately after the authority for their most recently retrieved network-status document. If this attempt fails, the client retries at other caches several times, before moving on to the next network-status document in sequence. Clients discard all network-status documents over 24 hours old. If enough mirrors (currently 4) claim not to have a given network status, we stop trying to download that authority's network-status, until we download a new network-status that makes us believe that the authority in question is running. Clients should wait a little longer after each failure. Clients SHOULD try to batch as many network-status requests as possible into each HTTP GET. (Note: clients can and should pick caches based on the network-status information they have: once they have first fetched network-status info from an authority, they should not need to go to the authority directly again.) 5.2. Downloading and storing router descriptors Clients try to have the best descriptor for each router. A descriptor is "best" if: * It is the most recently published descriptor listed for that router by at least two network-status documents. OR, * No descriptor for that router is listed by two or more network-status documents, and it is the most recently published descriptor listed by any network-status document. Periodically (currently every 10 seconds) clients check whether there are any "downloadable" descriptors. A descriptor is downloadable if: - It is the "best" descriptor for some router. - The descriptor was published at least 10 minutes in the past. (This prevents clients from trying to fetch descriptors that the mirrors have probably not yet retrieved and cached.) - The client does not currently have it. - The client is not currently trying to download it. - The client would not discard it immediately upon receiving it. - The client thinks it is running and valid (see 6.1 below). If at least 16 known routers have downloadable descriptors, or if enough time (currently 10 minutes) has passed since the last time the client tried to download descriptors, it launches requests for all downloadable descriptors, as described in 5.3 below. When a descriptor download fails, the client notes it, and does not consider the descriptor downloadable again until a certain amount of time has passed. (Currently 0 seconds for the first failure, 60 seconds for the second, 5 minutes for the third, 10 minutes for the fourth, and 1 day thereafter.) Periodically (currently once an hour) clients reset the failure count. No descriptors are downloaded until the client has downloaded more than half of the network-status documents. Clients retain the most recent descriptor they have downloaded for each router so long as it is not too old (currently, 48 hours), OR so long as it is recommended by at least one networkstatus AND no "better" descriptor has been downloaded. [Versions of Tor before 0.1.2.3-alpha would discard descriptors simply for being published too far in the past.] [The code seems to discard descriptors in all cases after they're 5 days old. True? -RD] 5.3. Managing downloads When a client has no live network-status documents, it downloads network-status documents from a randomly chosen authority. In all other cases, the client downloads from mirrors randomly chosen from among those believed to be V2 directory servers. (This information comes from the network-status documents; see 6 below.) When downloading multiple router descriptors, the client chooses multiple mirrors so that: - At least 3 different mirrors are used, except when this would result in more than one request for under 4 descriptors. - No more than 128 descriptors are requested from a single mirror. - Otherwise, as few mirrors as possible are used. After choosing mirrors, the client divides the descriptors among them randomly. After receiving any response client MUST discard any network-status documents and descriptors that it did not request. 6. Using directory information Everyone besides directory authorities uses the approaches in this section to decide which servers to use and what their keys are likely to be. (Directory authorities just believe their own opinions, as in 3.1 above.) 6.1. Choosing routers for circuits. Tor implementations only pay attention to "live" network-status documents. A network status is "live" if it is the most recently downloaded network status document for a given directory server, and the server is a directory server trusted by the client, and the network-status document is no more than 1 day old. For time-sensitive information, Tor implementations focus on "recent" network-status documents. A network status is "recent" if it is live, and if it was published in the last 60 minutes. If there are fewer than 3 such documents, the most recently published 3 are "recent." If there are fewer than 3 in all, all are "recent.") Circuits SHOULD NOT be built until the client has enough directory information: network-statuses (or failed attempts to download network-statuses) for all authorities, network-statuses for at more than half of the authorites, and descriptors for at least 1/4 of the servers believed to be running. A server is "listed" if it is included by more than half of the live network status documents. Clients SHOULD NOT use unlisted servers. Clients believe the flags "Valid", "Exit", "Fast", "Guard", "Stable", and "V2Dir" about a given router when they are asserted by more than half of the live network-status documents. Clients believe the flag "Running" if it is listed by more than half of the recent network-status documents. These flags are used as follows: - Clients SHOULD NOT use non-'Valid' or non-'Running' routers unless requested to do so. - Clients SHOULD NOT use non-'Fast' routers for any purpose other than very-low-bandwidth circuits (such as introduction circuits). - Clients SHOULD NOT use non-'Stable' routers for circuits that are likely to need to be open for a very long time (such as those used for IRC or SSH connections). - Clients SHOULD NOT choose non-'Guard' nodes when picking entry guard nodes. - Clients SHOULD NOT download directory information from non-'V2Dir' caches. 6.2. Managing naming In order to provide human-memorable names for individual server identities, some directory servers bind names to IDs. Clients handle names in two ways: When a client encounters a name it has not mapped before: If all the live "Naming" network-status documents the client has claim that the name binds to some identity ID, and the client has at least three live network-status documents, the client maps the name to ID. When a user tries to refer to a router with a name that does not have a mapping under the above rules, the implementation SHOULD warn the user. After giving the warning, the implementation MAY use a router that at least one Naming authority maps the name to, so long as no other naming authority maps that name to a different router. If no Naming authority maps the name to a router, the implementation MAY use any router that advertises the name. Not every router needs a nickname. When a router doesn't configure a nickname, it publishes with the default nickname "Unnamed". Authorities SHOULD NOT ever mark a router with this nickname as Named; client software SHOULD NOT ever use a router in response to a user request for a router called "Unnamed". 6.3. Software versions An implementation of Tor SHOULD warn when it has fetched (or has attempted to fetch and failed four consecutive times) a network-status for each authority, and it is running a software version not listed on more than half of the live "Versioning" network-status documents. 6.4. Warning about a router's status. If a router tries to publish its descriptor to a Naming authority that has its nickname mapped to another key, the router SHOULD warn the operator that it is either using the wrong key or is using an already claimed nickname. If a router has fetched (or attempted to fetch and failed four consecutive times) a network-status for every authority, and at least one of the authorities is "Naming", and no live "Naming" authorities publish a binding for the router's nickname, the router MAY remind the operator that the chosen nickname is not bound to this key at the authorities, and suggest contacting the authority operators. ... 6.5. Router protocol versions A client should believe that a router supports a given feature if that feature is supported by the router or protocol versions in more than half of the live networkstatus's "v" entries for that router. In other words, if the "v" entries for some router are: v Tor 0.0.8pre1 (from authority 1) v Tor 0.1.2.11 (from authority 2) v FutureProtocolDescription 99 (from authority 3) then the client should believe that the router supports any feature supported by 0.1.2.11. This is currently equivalent to believing the median declared version for a router in all live networkstatuses. 7. Standards compliance All clients and servers MUST support HTTP 1.0. 7.1. HTTP headers Servers MAY set the Content-Length: header. Servers SHOULD set Content-Encoding to "deflate" or "identity". Servers MAY include an X-Your-Address-Is: header, whose value is the apparent IP address of the client connecting to them (as a dotted quad). For directory connections tunneled over a BEGIN_DIR stream, servers SHOULD report the IP from which the circuit carrying the BEGIN_DIR stream reached them. [Servers before version 0.1.2.5-alpha reported 127.0.0.1 for all BEGIN_DIR-tunneled connections.] Servers SHOULD disable caching of multiple network statuses or multiple router descriptors. Servers MAY enable caching of single descriptors, single network statuses, the list of all router descriptors, a v1 directory, or a v1 running routers document. XXX mention times. 7.2. HTTP status codes XXX We should write down what return codes dirservers send in what situations.