TC: A Tor control protocol (Version 1) 0. Scope This document describes an implementation-specific protocol that is used for other programs (such as frontend user-interfaces) to communicate with a locally running Tor process. It is not part of the Tor onion routing protocol. This protocol replaces version 0 of TC, which is now deprecated. For reference, TC is described in "control-spec-v0.txt". Implementors are recommended to avoid using TC directly, but instead to use a library that can easily be updated to use the newer protocol. (Version 0 is used by Tor versions 0.1.0.x; the protocol in this document only works with Tor versions in the 0.1.1.x series and later.) 1. Protocol outline TC is a bidirectional message-based protocol. It assumes an underlying stream for communication between a controlling process (the "client" or "controller") and a Tor process (or "server"). The stream may be implemented via TCP, TLS-over-TCP, a Unix-domain socket, or so on, but it must provide reliable in-order delivery. For security, the stream should not be accessible by untrusted parties. In TC, the client and server send typed messages to each other over the underlying stream. The client sends "commands" and the server sends "replies". By default, all messages from the server are in response to messages from the client. Some client requests, however, will cause the server to send messages to the client indefinitely far into the future. Such "asynchronous" replies are marked as such. Servers respond to messages in the order messages are received. 2. Message format 2.1. Description format The message formats listed below use ABNF as described in RFC 2234. The protocol itself is loosely based on SMTP (see RFC 2821). We use the following nonterminals from RFC 2822: atom, qcontent We define the following general-use nonterminals: String = DQUOTE *qcontent DQUOTE There are explicitly no limits on line length. All 8-bit characters are permitted unless explicitly disallowed. Wherever CRLF is specified to be accepted from the controller, Tor MAY also accept LF. Tor, however, MUST NOT generate LF instead of CRLF. Controllers SHOULD always send CRLF. 2.2. Commands from controller to Tor Command = Keyword Arguments CRLF / "+" Keyword Arguments CRLF Data Keyword = 1*ALPHA Arguments = *(SP / VCHAR) Specific commands and their arguments are described below in section 3. 2.3. Replies from Tor to the controller Reply = SyncReply / AsyncReply SyncReply = *(MidReplyLine / DataReplyLine) EndReplyLine AsyncReply = *(MidReplyLine / DataReplyLine) EndReplyLine MidReplyLine = StatusCode "-" ReplyLine DataReplyLine = StatusCode "+" ReplyLine Data EndReplyLine = StatusCode SP ReplyLine ReplyLine = [ReplyText] CRLF ReplyText = XXXX StatusCode = 3DIGIT Specific replies are mentioned below in section 3, and described more fully in section 4. [Compatibility note: versions of Tor before 0.2.0.3-alpha sometimes generate AsyncReplies of the form "*(MidReplyLine / DataReplyLine)". This is incorrect, but controllers that need to work with these versions of Tor should be prepared to get multi-line AsyncReplies with the final line (usually "650 OK") omitted.] 2.4. General-use tokens ; CRLF means, "the ASCII Carriage Return character (decimal value value 13) ; followed by the ASCII Linefeed character (decimal value 10)." CRLF = CR LF ; Identifiers for servers. ServerID = Nickname / Fingerprint Nickname = 1*19 NicknameChar NicknameChar = "a"-"z" / "A"-"Z" / "0" - "9" Fingerprint = "$" 40*HEXDIG ; A "=" indicates that the given nickname is canonical; a "~" indicates ; that the given nickname is not canonical. If no nickname is given at ; all, Tor does not even have a guess for what this router calls itself. LongName = Fingerprint [ ( "=" / "~" ) Nickname ] ; How a controller tells Tor about a particular OR. There are four ; possible formats: ; $Digest -- The router whose identity key hashes to the given digest. ; This is the preferred way to refer to an OR. ; $Digest~Name -- The router whose identity key hashes to the given ; digest, but only if the router has the given nickname. ; $Digest=Name -- The router whose identity key hashes to the given ; digest, but only if the router is Named and has the given ; nickname. ; Name -- The Named router with the given nickname, or, if no such ; router exists, any router whose nickname matches the one given. ; This is not a safe way to refer to routers, since Named status ; could under some circumstances change over time. ServerSpec = LongName / Nickname ; Unique identifiers for streams or circuits. Currently, Tor only ; uses digits, but this may change StreamID = 1*16 IDChar CircuitID = 1*16 IDChar IDChar = ALPHA / DIGIT Address = ip4-address / ip6-address / hostname (XXXX Define these) ; A "Data" section is a sequence of octets concluded by the terminating ; sequence CRLF "." CRLF. The terminating sequence may not appear in the ; body of the data. Leading periods on lines in the data are escaped with ; an additional leading period as in RFC 2821 section 4.5.2. Data = *DataLine "." CRLF DataLine = CRLF / "." 1*LineItem CRLF / NonDotItem *LineItem CRLF LineItem = NonCR / 1*CR NonCRLF NonDotItem = NonDotCR / 1*CR NonCRLF 3. Commands All commands are case-insensitive, but most keywords are case-sensitive. 3.1. SETCONF Change the value of one or more configuration variables. The syntax is: "SETCONF" 1*(SP keyword ["=" value]) CRLF value = String / QuotedString Tor behaves as though it had just read each of the key-value pairs from its configuration file. Keywords with no corresponding values have their configuration values reset to 0 or NULL (use RESETCONF if you want to set it back to its default). SETCONF is all-or-nothing: if there is an error in any of the configuration settings, Tor sets none of them. Tor responds with a "250 configuration values set" reply on success. If some of the listed keywords can't be found, Tor replies with a "552 Unrecognized option" message. Otherwise, Tor responds with a "513 syntax error in configuration values" reply on syntax error, or a "553 impossible configuration setting" reply on a semantic error. When a configuration option takes multiple values, or when multiple configuration keys form a context-sensitive group (see GETCONF below), then setting _any_ of the options in a SETCONF command is taken to reset all of the others. For example, if two ORBindAddress values are configured, and a SETCONF command arrives containing a single ORBindAddress value, the new command's value replaces the two old values. Sometimes it is not possible to change configuration options solely by issuing a series of SETCONF commands, because the value of one of the configuration options depends on the value of another which has not yet been set. Such situations can be overcome by setting multiple configuration options with a single SETCONF command (e.g. SETCONF ORPort=443 ORListenAddress=9001). 3.2. RESETCONF Remove all settings for a given configuration option entirely, assign its default value (if any), and then assign the String provided. Typically the String is left empty, to simply set an option back to its default. The syntax is: "RESETCONF" 1*(SP keyword ["=" String]) CRLF Otherwise it behaves like SETCONF above. 3.3. GETCONF Request the value of a configuration variable. The syntax is: "GETCONF" 1*(SP keyword) CRLF If all of the listed keywords exist in the Tor configuration, Tor replies with a series of reply lines of the form: 250 keyword=value If any option is set to a 'default' value semantically different from an empty string, Tor may reply with a reply line of the form: 250 keyword Value may be a raw value or a quoted string. Tor will try to use unquoted values except when the value could be misinterpreted through not being quoted. If some of the listed keywords can't be found, Tor replies with a "552 unknown configuration keyword" message. If an option appears multiple times in the configuration, all of its key-value pairs are returned in order. Some options are context-sensitive, and depend on other options with different keywords. These cannot be fetched directly. Currently there is only one such option: clients should use the "HiddenServiceOptions" virtual keyword to get all HiddenServiceDir, HiddenServicePort, HiddenServiceNodes, and HiddenServiceExcludeNodes option settings. 3.4. SETEVENTS Request the server to inform the client about interesting events. The syntax is: "SETEVENTS" [SP "EXTENDED"] *(SP EventCode) CRLF EventCode = "CIRC" / "STREAM" / "ORCONN" / "BW" / "DEBUG" / "INFO" / "NOTICE" / "WARN" / "ERR" / "NEWDESC" / "ADDRMAP" / "AUTHDIR_NEWDESCS" / "DESCCHANGED" / "STATUS_GENERAL" / "STATUS_CLIENT" / "STATUS_SERVER" / "GUARD" / "NS" / "STREAM_BW" / "CLIENTS_SEEN" / "NEWCONSENSUS" / "BUILDTIMEOUT_SET" Any events *not* listed in the SETEVENTS line are turned off; thus, sending SETEVENTS with an empty body turns off all event reporting. The server responds with a "250 OK" reply on success, and a "552 Unrecognized event" reply if one of the event codes isn't recognized. (On error, the list of active event codes isn't changed.) If the flag string "EXTENDED" is provided, Tor may provide extra information with events for this connection; see 4.1 for more information. NOTE: All events on a given connection will be provided in extended format, or none. NOTE: "EXTENDED" is only supported in Tor 0.1.1.9-alpha or later. Each event is described in more detail in Section 4.1. 3.5. AUTHENTICATE Sent from the client to the server. The syntax is: "AUTHENTICATE" [ SP 1*HEXDIG / QuotedString ] CRLF The server responds with "250 OK" on success or "515 Bad authentication" if the authentication cookie is incorrect. Tor closes the connection on an authentication failure. The format of the 'cookie' is implementation-dependent; see 5.1 below for information on how the standard Tor implementation handles it. Before the client has authenticated, no command other than PROTOCOLINFO, AUTHENTICATE, or QUIT is valid. If the controller sends any other command, or sends a malformed command, or sends an unsuccessful AUTHENTICATE command, or sends PROTOCOLINFO more than once, Tor sends an error reply and closes the connection. To prevent some cross-protocol attacks, the AUTHENTICATE command is still required even if all authentication methods in Tor are disabled. In this case, the controller should just send "AUTHENTICATE" CRLF. (Versions of Tor before 0.1.2.16 and 0.2.0.4-alpha did not close the connection after an authentication failure.) 3.6. SAVECONF Sent from the client to the server. The syntax is: "SAVECONF" CRLF Instructs the server to write out its config options into its torrc. Server returns "250 OK" if successful, or "551 Unable to write configuration to disk" if it can't write the file or some other error occurs. See also the "getinfo config-text" command, if the controller wants to write the torrc file itself. 3.7. SIGNAL Sent from the client to the server. The syntax is: "SIGNAL" SP Signal CRLF Signal = "RELOAD" / "SHUTDOWN" / "DUMP" / "DEBUG" / "HALT" / "HUP" / "INT" / "USR1" / "USR2" / "TERM" / "NEWNYM" / "CLEARDNSCACHE" The meaning of the signals are: RELOAD -- Reload: reload config items, refetch directory. (like HUP) SHUTDOWN -- Controlled shutdown: if server is an OP, exit immediately. If it's an OR, close listeners and exit after 30 seconds. (like INT) DUMP -- Dump stats: log information about open connections and circuits. (like USR1) DEBUG -- Debug: switch all open logs to loglevel debug. (like USR2) HALT -- Immediate shutdown: clean up and exit now. (like TERM) CLEARDNSCACHE -- Forget the client-side cached IPs for all hostnames. NEWNYM -- Switch to clean circuits, so new application requests don't share any circuits with old ones. Also clears the client-side DNS cache. (Tor MAY rate-limit its response to this signal.) The server responds with "250 OK" if the signal is recognized (or simply closes the socket if it was asked to close immediately), or "552 Unrecognized signal" if the signal is unrecognized. 3.8. MAPADDRESS Sent from the client to the server. The syntax is: "MAPADDRESS" 1*(Address "=" Address SP) CRLF The first address in each pair is an "original" address; the second is a "replacement" address. The client sends this message to the server in order to tell it that future SOCKS requests for connections to the original address should be replaced with connections to the specified replacement address. If the addresses are well-formed, and the server is able to fulfill the request, the server replies with a 250 message: 250-OldAddress1=NewAddress1 250 OldAddress2=NewAddress2 containing the source and destination addresses. If request is malformed, the server replies with "512 syntax error in command argument". If the server can't fulfill the request, it replies with "451 resource exhausted". The client may decline to provide a body for the original address, and instead send a special null address ("0.0.0.0" for IPv4, "::0" for IPv6, or "." for hostname), signifying that the server should choose the original address itself, and return that address in the reply. The server should ensure that it returns an element of address space that is unlikely to be in actual use. If there is already an address mapped to the destination address, the server may reuse that mapping. If the original address is already mapped to a different address, the old mapping is removed. If the original address and the destination address are the same, the server removes any mapping in place for the original address. Example: C: MAPADDRESS 0.0.0.0=torproject.org 1.2.3.4=tor.freehaven.net S: 250-127.192.10.10=torproject.org S: 250 1.2.3.4=tor.freehaven.net {Note: This feature is designed to be used to help Tor-ify applications that need to use SOCKS4 or hostname-less SOCKS5. There are three approaches to doing this: 1. Somehow make them use SOCKS4a or SOCKS5-with-hostnames instead. 2. Use tor-resolve (or another interface to Tor's resolve-over-SOCKS feature) to resolve the hostname remotely. This doesn't work with special addresses like x.onion or x.y.exit. 3. Use MAPADDRESS to map an IP address to the desired hostname, and then arrange to fool the application into thinking that the hostname has resolved to that IP. This functionality is designed to help implement the 3rd approach.} Mappings set by the controller last until the Tor process exits: they never expire. If the controller wants the mapping to last only a certain time, then it must explicitly un-map the address when that time has elapsed. 3.9. GETINFO Sent from the client to the server. The syntax is as for GETCONF: "GETINFO" 1*(SP keyword) CRLF one or more NL-terminated strings. The server replies with an INFOVALUE message, or a 551 or 552 error. Unlike GETCONF, this message is used for data that are not stored in the Tor configuration file, and that may be longer than a single line. On success, one ReplyLine is sent for each requested value, followed by a final 250 OK ReplyLine. If a value fits on a single line, the format is: 250-keyword=value If a value must be split over multiple lines, the format is: 250+keyword= value . Recognized keys and their values include: "version" -- The version of the server's software, including the name of the software. (example: "Tor 0.0.9.4") "config-file" -- The location of Tor's configuration file ("torrc"). "config-text" -- The contents that Tor would write if you send it a SAVECONF command, so the controller can write the file to disk itself. [First implemented in 0.2.2.7-alpha.] ["exit-policy/prepend" -- The default exit policy lines that Tor will *prepend* to the ExitPolicy config option. -- Never implemented. Useful?] "exit-policy/default" -- The default exit policy lines that Tor will *append* to the ExitPolicy config option. "desc/id/" or "desc/name/" -- the latest server descriptor for a given OR, NUL-terminated. "desc-annotations/id/" -- outputs the annotations string (source, timestamp of arrival, purpose, etc) for the corresponding descriptor. [First implemented in 0.2.0.13-alpha.] "extra-info/digest/" -- the extrainfo document whose digest (in hex) is . Only available if we're downloading extra-info documents. "ns/id/" or "ns/name/" -- the latest router status info (v2 directory style) for a given OR. Router status info is as given in dir-spec.txt, and reflects the current beliefs of this Tor about the router in question. Like directory clients, controllers MUST tolerate unrecognized flags and lines. The published date and descriptor digest are those believed to be best by this Tor, not necessarily those for a descriptor that Tor currently has. [First implemented in 0.1.2.3-alpha.] "ns/all" -- Router status info (v2 directory style) for all ORs we have an opinion about, joined by newlines. [First implemented in 0.1.2.3-alpha.] "ns/purpose/" -- Router status info (v2 directory style) for all ORs of this purpose. Mostly designed for /ns/purpose/bridge queries. [First implemented in 0.2.0.13-alpha.] "desc/all-recent" -- the latest server descriptor for every router that Tor knows about. "network-status" -- a space-separated list (v1 directory style) of all known OR identities. This is in the same format as the router-status line in v1 directories; see dir-spec-v1.txt section 3 for details. (If VERBOSE_NAMES is enabled, the output will not conform to dir-spec-v1.txt; instead, the result will be a space-separated list of LongName, each preceded by a "!" if it is believed to be not running.) This option is deprecated; use "ns/all" instead. "address-mappings/all" "address-mappings/config" "address-mappings/cache" "address-mappings/control" -- a \r\n-separated list of address mappings, each in the form of "from-address to-address expiry". The 'config' key returns those address mappings set in the configuration; the 'cache' key returns the mappings in the client-side DNS cache; the 'control' key returns the mappings set via the control interface; the 'all' target returns the mappings set through any mechanism. Expiry is formatted as with ADDRMAP events, except that "expiry" is always a time in GMT or the string "NEVER"; see section 4.1.7. First introduced in 0.2.0.3-alpha. "addr-mappings/*" -- as for address-mappings/*, but without the expiry portion of the value. Use of this value is deprecated since 0.2.0.3-alpha; use address-mappings instead. "address" -- the best guess at our external IP address. If we have no guess, return a 551 error. (Added in 0.1.2.2-alpha) "fingerprint" -- the contents of the fingerprint file that Tor writes as a server, or a 551 if we're not a server currently. (Added in 0.1.2.3-alpha) "circuit-status" A series of lines as for a circuit status event. Each line is of the form: CircuitID SP CircStatus [SP Path] CRLF "stream-status" A series of lines as for a stream status event. Each is of the form: StreamID SP StreamStatus SP CircID SP Target CRLF "orconn-status" A series of lines as for an OR connection status event. Each is of the form: ServerID SP ORStatus CRLF "entry-guards" A series of lines listing the currently chosen entry guards, if any. Each is of the form: ServerID2 SP Status [SP ISOTime] CRLF Status-with-time = ("unlisted") SP ISOTime Status = ("up" / "never-connected" / "down" / "unusable" / "unlisted" ) ServerID2 = Nickname / 40*HEXDIG [From 0.1.1.4-alpha to 0.1.1.10-alpha, this was called "helper-nodes". Tor still supports calling it that for now, but support will be removed in 0.1.3.x.] [Older versions of Tor (before 0.1.2.x-final) generated 'down' instead of unlisted/unusable. Current Tors never generate 'down'.] [XXXX ServerID2 differs from ServerID in not prefixing fingerprints with a $. This is an implementation error. It would be nice to add the $ back in if we can do so without breaking compatibility.] "accounting/enabled" "accounting/hibernating" "accounting/bytes" "accounting/bytes-left" "accounting/interval-start" "accounting/interval-wake" "accounting/interval-end" Information about accounting status. If accounting is enabled, "enabled" is 1; otherwise it is 0. The "hibernating" field is "hard" if we are accepting no data; "soft" if we're accepting no new connections, and "awake" if we're not hibernating at all. The "bytes" and "bytes-left" fields contain (read-bytes SP write-bytes), for the start and the rest of the interval respectively. The 'interval-start' and 'interval-end' fields are the borders of the current interval; the 'interval-wake' field is the time within the current interval (if any) where we plan[ned] to start being active. The times are GMT. "config/names" A series of lines listing the available configuration options. Each is of the form: OptionName SP OptionType [ SP Documentation ] CRLF OptionName = Keyword OptionType = "Integer" / "TimeInterval" / "DataSize" / "Float" / "Boolean" / "Time" / "CommaList" / "Dependant" / "Virtual" / "String" / "LineList" Documentation = Text "info/names" A series of lines listing the available GETINFO options. Each is of one of these forms: OptionName SP Documentation CRLF OptionPrefix SP Documentation CRLF OptionPrefix = OptionName "/*" "events/names" A space-separated list of all the events supported by this version of Tor's SETEVENTS. "features/names" A space-separated list of all the events supported by this version of Tor's USEFEATURE. "ip-to-country/*" Maps IP addresses to 2-letter country codes. For example, "GETINFO ip-to-country/18.0.0.1" should give "US". "next-circuit/IP:port" XXX todo. "dir/status-vote/current/consensus" [added in Tor 0.2.1.6-alpha] "dir/status/authority" "dir/status/fp/" "dir/status/fp/++" "dir/status/all" "dir/server/fp/" "dir/server/fp/++" "dir/server/d/" "dir/server/d/++" "dir/server/authority" "dir/server/all" A series of lines listing directory contents, provided according to the specification for the URLs listed in Section 4.4 of dir-spec.txt. Note that Tor MUST NOT provide private information, such as descriptors for routers not marked as general-purpose. When asked for 'authority' information for which this Tor is not authoritative, Tor replies with an empty string. "status/circuit-established" "status/enough-dir-info" "status/good-server-descriptor" "status/accepted-server-descriptor" "status/..." These provide the current internal Tor values for various Tor states. See Section 4.1.10 for explanations. (Only a few of the status events are available as getinfo's currently. Let us know if you want more exposed.) "status/reachability-succeeded/or" 0 or 1, depending on whether we've found our ORPort reachable. "status/reachability-succeeded/dir" 0 or 1, depending on whether we've found our DirPort reachable. "status/reachability-succeeded" "OR=" ("0"/"1") SP "DIR=" ("0"/"1") Combines status/reachability-succeeded/*; controllers MUST ignore unrecognized elements in this entry. "status/bootstrap-phase" Returns the most recent bootstrap phase status event sent. Specifically, it returns a string starting with either "NOTICE BOOTSTRAP ..." or "WARN BOOTSTRAP ...". Controllers should use this getinfo when they connect or attach to Tor to learn its current bootstrap state. "status/version/recommended" List of currently recommended versions. "status/version/current" Status of the current version. One of: new, old, unrecommended, recommended, new in series, obsolete, unknown. "status/clients-seen" A summary of which countries we've seen clients from recently, formatted the same as the CLIENTS_SEEN status event described in Section 4.1.14. This GETINFO option is currently available only for bridge relays. Examples: C: GETINFO version desc/name/moria1 S: 250+desc/name/moria= S: [Descriptor for moria] S: . S: 250-version=Tor 0.1.1.0-alpha-cvs S: 250 OK 3.10. EXTENDCIRCUIT Sent from the client to the server. The format is: "EXTENDCIRCUIT" SP CircuitID [SP ServerSpec *("," ServerSpec) SP "purpose=" Purpose] CRLF This request takes one of two forms: either the CircuitID is zero, in which case it is a request for the server to build a new circuit, or the CircuitID is nonzero, in which case it is a request for the server to extend an existing circuit with that ID according to the specified path. If the CircuitID is 0, the controller has the option of providing a path for Tor to use to build the circuit. If it does not provide a path, Tor will select one automatically from high capacity nodes according to path-spec.txt. If CircuitID is 0 and "purpose=" is specified, then the circuit's purpose is set. Two choices are recognized: "general" and "controller". If not specified, circuits are created as "general". If the request is successful, the server sends a reply containing a message body consisting of the CircuitID of the (maybe newly created) circuit. The syntax is "250" SP "EXTENDED" SP CircuitID CRLF. 3.11. SETCIRCUITPURPOSE Sent from the client to the server. The format is: "SETCIRCUITPURPOSE" SP CircuitID SP Purpose CRLF This changes the circuit's purpose. See EXTENDCIRCUIT above for details. 3.12. SETROUTERPURPOSE Sent from the client to the server. The format is: "SETROUTERPURPOSE" SP NicknameOrKey SP Purpose CRLF This changes the descriptor's purpose. See +POSTDESCRIPTOR below for details. NOTE: This command was disabled and made obsolete as of Tor 0.2.0.8-alpha. It doesn't exist anymore, and is listed here only for historical interest. 3.13. ATTACHSTREAM Sent from the client to the server. The syntax is: "ATTACHSTREAM" SP StreamID SP CircuitID [SP "HOP=" HopNum] CRLF This message informs the server that the specified stream should be associated with the specified circuit. Each stream may be associated with at most one circuit, and multiple streams may share the same circuit. Streams can only be attached to completed circuits (that is, circuits that have sent a circuit status 'BUILT' event or are listed as built in a GETINFO circuit-status request). If the circuit ID is 0, responsibility for attaching the given stream is returned to Tor. If HOP=HopNum is specified, Tor will choose the HopNumth hop in the circuit as the exit node, rather than the last node in the circuit. Hops are 1-indexed; generally, it is not permitted to attach to hop 1. Tor responds with "250 OK" if it can attach the stream, 552 if the circuit or stream didn't exist, or 551 if the stream couldn't be attached for another reason. {Implementation note: Tor will close unattached streams by itself, roughly two minutes after they are born. Let the developers know if that turns out to be a problem.} {Implementation note: By default, Tor automatically attaches streams to circuits itself, unless the configuration variable "__LeaveStreamsUnattached" is set to "1". Attempting to attach streams via TC when "__LeaveStreamsUnattached" is false may cause a race between Tor and the controller, as both attempt to attach streams to circuits.} {Implementation note: You can try to attachstream to a stream that has already sent a connect or resolve request but hasn't succeeded yet, in which case Tor will detach the stream from its current circuit before proceeding with the new attach request.} 3.14. POSTDESCRIPTOR Sent from the client to the server. The syntax is: "+POSTDESCRIPTOR" [SP "purpose=" Purpose] [SP "cache=" Cache] CRLF Descriptor CRLF "." CRLF This message informs the server about a new descriptor. If Purpose is specified, it must be either "general", "controller", or "bridge", else we return a 552 error. The default is "general". If Cache is specified, it must be either "no" or "yes", else we return a 552 error. If Cache is not specified, Tor will decide for itself whether it wants to cache the descriptor, and controllers must not rely on its choice. The descriptor, when parsed, must contain a number of well-specified fields, including fields for its nickname and identity. If there is an error in parsing the descriptor, the server must send a "554 Invalid descriptor" reply. If the descriptor is well-formed but the server chooses not to add it, it must reply with a 251 message whose body explains why the server was not added. If the descriptor is added, Tor replies with "250 OK". 3.15. REDIRECTSTREAM Sent from the client to the server. The syntax is: "REDIRECTSTREAM" SP StreamID SP Address [SP Port] CRLF Tells the server to change the exit address on the specified stream. If Port is specified, changes the destination port as well. No remapping is performed on the new provided address. To be sure that the modified address will be used, this event must be sent after a new stream event is received, and before attaching this stream to a circuit. Tor replies with "250 OK" on success. 3.16. CLOSESTREAM Sent from the client to the server. The syntax is: "CLOSESTREAM" SP StreamID SP Reason *(SP Flag) CRLF Tells the server to close the specified stream. The reason should be one of the Tor RELAY_END reasons given in tor-spec.txt, as a decimal. Flags is not used currently; Tor servers SHOULD ignore unrecognized flags. Tor may hold the stream open for a while to flush any data that is pending. Tor replies with "250 OK" on success, or a 512 if there aren't enough arguments, or a 552 if it doesn't recognize the StreamID or reason. 3.17. CLOSECIRCUIT The syntax is: CLOSECIRCUIT SP CircuitID *(SP Flag) CRLF Flag = "IfUnused" Tells the server to close the specified circuit. If "IfUnused" is provided, do not close the circuit unless it is unused. Other flags may be defined in the future; Tor SHOULD ignore unrecognized flags. Tor replies with "250 OK" on success, or a 512 if there aren't enough arguments, or a 552 if it doesn't recognize the CircuitID. 3.18. QUIT Tells the server to hang up on this controller connection. This command can be used before authenticating. 3.19. USEFEATURE The syntax is: "USEFEATURE" *(SP FeatureName) CRLF FeatureName = 1*(ALPHA / DIGIT / "_" / "-") Sometimes extensions to the controller protocol break compatibility with older controllers. In this case, whenever possible, the extensions are first included in Tor disabled by default, and only enabled on a given controller connection when the "USEFEATURE" command is given. Once a "USEFEATURE" command is given, it applies to all subsequent interactions on the same connection; to disable an enabled feature, a new controller connection must be opened. This is a forward-compatibility mechanism; each feature will eventually become a regular part of the control protocol in some future version of Tor. Tor will ignore a request to use any feature that is already on by default. Tor will give a "552" error if any requested feature is not recognized. Feature names are case-insensitive. EXTENDED_EVENTS Same as passing 'EXTENDED' to SETEVENTS; this is the preferred way to request the extended event syntax. This feature was first used in 0.1.2.3-alpha. It is always-on in Tor 0.2.2.1-alpha and later. VERBOSE_NAMES Instead of ServerID as specified above, the controller should identify ORs by LongName in events and GETINFO results. This format is strictly more informative: rather than including Nickname for known Named routers and Fingerprint for unknown or unNamed routers, the LongName format includes a Fingerprint, an indication of Named status, and a Nickname (if one is known). This will not be always-enabled until at least two stable releases after 0.1.2.2-alpha, the release where it was first available. It is always-on in Tor 0.2.2.1-alpha and later. 3.20. RESOLVE The syntax is "RESOLVE" *Option *Address CRLF Option = "mode=reverse" Address = a hostname or IPv4 address This command launches a remote hostname lookup request for every specified request (or reverse lookup if "mode=reverse" is specified). Note that the request is done in the background: to see the answers, your controller will need to listen for ADDRMAP events; see 4.1.7 below. [Added in Tor 0.2.0.3-alpha] 3.21. PROTOCOLINFO The syntax is: "PROTOCOLINFO" *(SP PIVERSION) CRLF The server reply format is: "250-PROTOCOLINFO" SP PIVERSION CRLF *InfoLine "250 OK" CRLF InfoLine = AuthLine / VersionLine / OtherLine AuthLine = "250-AUTH" SP "METHODS=" AuthMethod *(",")AuthMethod *(SP "COOKIEFILE=" AuthCookieFile) CRLF VersionLine = "250-VERSION" SP "Tor=" TorVersion [SP Arguments] CRLF AuthMethod = "NULL" / ; No authentication is required "HASHEDPASSWORD" / ; A controller must supply the original password "COOKIE" / ; A controller must supply the contents of a cookie AuthCookieFile = QuotedString TorVersion = QuotedString OtherLine = "250-" Keyword [SP Arguments] CRLF PIVERSION: 1*DIGIT Tor MAY give its InfoLines in any order; controllers MUST ignore InfoLines with keywords they do not recognize. Controllers MUST ignore extraneous data on any InfoLine. PIVERSION is there in case we drastically change the syntax one day. For now it should always be "1". Controllers MAY provide a list of the protocolinfo versions they support; Tor MAY select a version that the controller does not support. AuthMethod is used to specify one or more control authentication methods that Tor currently accepts. AuthCookieFile specifies the absolute path and filename of the authentication cookie that Tor is expecting and is provided iff the METHODS field contains the method "COOKIE". Controllers MUST handle escape sequences inside this string. The VERSION line contains the Tor version. [Unlike other commands besides AUTHENTICATE, PROTOCOLINFO may be used (but only once!) before AUTHENTICATE.] [PROTOCOLINFO was not supported before Tor 0.2.0.5-alpha.] 4. Replies Reply codes follow the same 3-character format as used by SMTP, with the first character defining a status, the second character defining a subsystem, and the third designating fine-grained information. The TC protocol currently uses the following first characters: 2yz Positive Completion Reply The command was successful; a new request can be started. 4yz Temporary Negative Completion reply The command was unsuccessful but might be reattempted later. 5yz Permanent Negative Completion Reply The command was unsuccessful; the client should not try exactly that sequence of commands again. 6yz Asynchronous Reply Sent out-of-order in response to an earlier SETEVENTS command. The following second characters are used: x0z Syntax Sent in response to ill-formed or nonsensical commands. x1z Protocol Refers to operations of the Tor Control protocol. x5z Tor Refers to actual operations of Tor system. The following codes are defined: 250 OK 251 Operation was unnecessary [Tor has declined to perform the operation, but no harm was done.] 451 Resource exhausted 500 Syntax error: protocol 510 Unrecognized command 511 Unimplemented command 512 Syntax error in command argument 513 Unrecognized command argument 514 Authentication required 515 Bad authentication 550 Unspecified Tor error 551 Internal error [Something went wrong inside Tor, so that the client's request couldn't be fulfilled.] 552 Unrecognized entity [A configuration key, a stream ID, circuit ID, event, mentioned in the command did not actually exist.] 553 Invalid configuration value [The client tried to set a configuration option to an incorrect, ill-formed, or impossible value.] 554 Invalid descriptor 555 Unmanaged entity 650 Asynchronous event notification Unless specified to have specific contents, the human-readable messages in error replies should not be relied upon to match those in this document. 4.1. Asynchronous events These replies can be sent after a corresponding SETEVENTS command has been received. They will not be interleaved with other Reply elements, but they can appear between a command and its corresponding reply. For example, this sequence is possible: C: SETEVENTS CIRC S: 250 OK C: GETCONF SOCKSPORT ORPORT S: 650 CIRC 1000 EXTENDED moria1,moria2 S: 250-SOCKSPORT=9050 S: 250 ORPORT=0 But this sequence is disallowed: C: SETEVENTS CIRC S: 250 OK C: GETCONF SOCKSPORT ORPORT S: 250-SOCKSPORT=9050 S: 650 CIRC 1000 EXTENDED moria1,moria2 S: 250 ORPORT=0 Clients MUST tolerate more arguments in an asynchonous reply than expected, and MUST tolerate more lines in an asynchronous reply than expected. For instance, a client that expects a CIRC message like: 650 CIRC 1000 EXTENDED moria1,moria2 must tolerate: 650-CIRC 1000 EXTENDED moria1,moria2 0xBEEF 650-EXTRAMAGIC=99 650 ANONYMITY=high If clients ask for extended events, then each event line as specified below will be followed by additional extensions. Additional lines will be of the form "650" ("-"/" ") KEYWORD ["=" ARGUMENTS] CRLF Additional arguments will be of the form SP KEYWORD ["=" ( QuotedString / * NonSpDquote ) ] Such clients MUST tolerate lines with keywords they do not recognize. 4.1.1. Circuit status changed The syntax is: "650" SP "CIRC" SP CircuitID SP CircStatus [SP Path] [SP "REASON=" Reason [SP "REMOTE_REASON=" Reason]] CRLF CircStatus = "LAUNCHED" / ; circuit ID assigned to new circuit "BUILT" / ; all hops finished, can now accept streams "EXTENDED" / ; one more hop has been completed "FAILED" / ; circuit closed (was not built) "CLOSED" ; circuit closed (was built) Path = ServerID *("," ServerID) Reason = "NONE" / "TORPROTOCOL" / "INTERNAL" / "REQUESTED" / "HIBERNATING" / "RESOURCELIMIT" / "CONNECTFAILED" / "OR_IDENTITY" / "OR_CONN_CLOSED" / "TIMEOUT" / "FINISHED" / "DESTROYED" / "NOPATH" / "NOSUCHSERVICE" The path is provided only when the circuit has been extended at least one hop. The "REASON" field is provided only for FAILED and CLOSED events, and only if extended events are enabled (see 3.19). Clients MUST accept reasons not listed above. Reasons are as given in tor-spec.txt, except for: NOPATH (Not enough nodes to make circuit) The "REMOTE_REASON" field is provided only when we receive a DESTROY or TRUNCATE cell, and only if extended events are enabled. It contains the actual reason given by the remote OR for closing the circuit. Clients MUST accept reasons not listed above. Reasons are as listed in tor-spec.txt. 4.1.2. Stream status changed The syntax is: "650" SP "STREAM" SP StreamID SP StreamStatus SP CircID SP Target [SP "REASON=" Reason [ SP "REMOTE_REASON=" Reason ]] [SP "SOURCE=" Source] [ SP "SOURCE_ADDR=" Address ":" Port ] [SP "PURPOSE=" Purpose] CRLF StreamStatus = "NEW" / ; New request to connect "NEWRESOLVE" / ; New request to resolve an address "REMAP" / ; Address re-mapped to another "SENTCONNECT" / ; Sent a connect cell along a circuit "SENTRESOLVE" / ; Sent a resolve cell along a circuit "SUCCEEDED" / ; Received a reply; stream established "FAILED" / ; Stream failed and not retriable "CLOSED" / ; Stream closed "DETACHED" ; Detached from circuit; still retriable Target = Address ":" Port The circuit ID designates which circuit this stream is attached to. If the stream is unattached, the circuit ID "0" is given. Reason = "MISC" / "RESOLVEFAILED" / "CONNECTREFUSED" / "EXITPOLICY" / "DESTROY" / "DONE" / "TIMEOUT" / "HIBERNATING" / "INTERNAL"/ "RESOURCELIMIT" / "CONNRESET" / "TORPROTOCOL" / "NOTDIRECTORY" / "END" The "REASON" field is provided only for FAILED, CLOSED, and DETACHED events, and only if extended events are enabled (see 3.19). Clients MUST accept reasons not listed above. Reasons are as given in tor-spec.txt, except for: END (We received a RELAY_END cell from the other side of this stream.) [XXXX document more. -NM] The "REMOTE_REASON" field is provided only when we receive a RELAY_END cell, and only if extended events are enabled. It contains the actual reason given by the remote OR for closing the stream. Clients MUST accept reasons not listed above. Reasons are as listed in tor-spec.txt. "REMAP" events include a Source if extended events are enabled: Source = "CACHE" / "EXIT" Clients MUST accept sources not listed above. "CACHE" is given if the Tor client decided to remap the address because of a cached answer, and "EXIT" is given if the remote node we queried gave us the new address as a response. The "SOURCE_ADDR" field is included with NEW and NEWRESOLVE events if extended events are enabled. It indicates the address and port that requested the connection, and can be (e.g.) used to look up the requesting program. Purpose = "DIR_FETCH" / "UPLOAD_DESC" / "DNS_REQUEST" / "USER" / "DIRPORT_TEST" The "PURPOSE" field is provided only for NEW and NEWRESOLVE events, and only if extended events are enabled (see 3.19). Clients MUST accept purposes not listed above. 4.1.3. OR Connection status changed The syntax is: "650" SP "ORCONN" SP (ServerID / Target) SP ORStatus [ SP "REASON=" Reason ] [ SP "NCIRCS=" NumCircuits ] CRLF ORStatus = "NEW" / "LAUNCHED" / "CONNECTED" / "FAILED" / "CLOSED" NEW is for incoming connections, and LAUNCHED is for outgoing connections. CONNECTED means the TLS handshake has finished (in either direction). FAILED means a connection is being closed that hasn't finished its handshake, and CLOSED is for connections that have handshaked. A ServerID is specified unless it's a NEW connection, in which case we don't know what server it is yet, so we use Address:Port. If extended events are enabled (see 3.19), optional reason and circuit counting information is provided for CLOSED and FAILED events. Reason = "MISC" / "DONE" / "CONNECTREFUSED" / "IDENTITY" / "CONNECTRESET" / "TIMEOUT" / "NOROUTE" / "IOERROR" / "RESOURCELIMIT" NumCircuits counts both established and pending circuits. 4.1.4. Bandwidth used in the last second The syntax is: "650" SP "BW" SP BytesRead SP BytesWritten *(SP Type "=" Num) CRLF BytesRead = 1*DIGIT BytesWritten = 1*DIGIT Type = "DIR" / "OR" / "EXIT" / "APP" / ... Num = 1*DIGIT BytesRead and BytesWritten are the totals. [In a future Tor version, we may also include a breakdown of the connection types that used bandwidth this second (not implemented yet).] 4.1.5. Log messages The syntax is: "650" SP Severity SP ReplyText CRLF or "650+" Severity CRLF Data 650 SP "OK" CRLF Severity = "DEBUG" / "INFO" / "NOTICE" / "WARN"/ "ERR" 4.1.6. New descriptors available Syntax: "650" SP "NEWDESC" 1*(SP ServerID) CRLF 4.1.7. New Address mapping Syntax: "650" SP "ADDRMAP" SP Address SP NewAddress SP Expiry [SP Error] SP GMTExpiry CRLF NewAddress = Address / "" Expiry = DQUOTE ISOTime DQUOTE / "NEVER" Error = "error=" ErrorCode ErrorCode = XXXX GMTExpiry = "EXPIRES=" DQUOTE IsoTime DQUOTE Error and GMTExpiry are only provided if extended events are enabled. Expiry is expressed as the local time (rather than GMT). This is a bug, left in for backward compatibility; new code should look at GMTExpiry instead. These events are generated when a new address mapping is entered in the cache, or when the answer for a RESOLVE command is found. 4.1.8. Descriptors uploaded to us in our role as authoritative dirserver Syntax: "650" "+" "AUTHDIR_NEWDESCS" CRLF Action CRLF Message CRLF Descriptor CRLF "." CRLF "650" SP "OK" CRLF Action = "ACCEPTED" / "DROPPED" / "REJECTED" Message = Text 4.1.9. Our descriptor changed Syntax: "650" SP "DESCCHANGED" CRLF [First added in 0.1.2.2-alpha.] 4.1.10. Status events Status events (STATUS_GENERAL, STATUS_CLIENT, and STATUS_SERVER) are sent based on occurrences in the Tor process pertaining to the general state of the program. Generally, they correspond to log messages of severity Notice or higher. They differ from log messages in that their format is a specified interface. Syntax: "650" SP StatusType SP StatusSeverity SP StatusAction [SP StatusArguments] CRLF StatusType = "STATUS_GENERAL" / "STATUS_CLIENT" / "STATUS_SERVER" StatusSeverity = "NOTICE" / "WARN" / "ERR" StatusAction = 1*ALPHA StatusArguments = StatusArgument *(SP StatusArgument) StatusArgument = StatusKeyword '=' StatusValue StatusKeyword = 1*(ALNUM / "_") StatusValue = 1*(ALNUM / '_') / QuotedString Action is a string, and Arguments is a series of keyword=value pairs on the same line. Values may be space-terminated strings, or quoted strings. These events are always produced with EXTENDED_EVENTS and VERBOSE_NAMES; see the explanations in the USEFEATURE section for details. Controllers MUST tolerate unrecognized actions, MUST tolerate unrecognized arguments, MUST tolerate missing arguments, and MUST tolerate arguments that arrive in any order. Each event description below is accompanied by a recommendation for controllers. These recommendations are suggestions only; no controller is required to implement them. Compatibility note: versions of Tor before 0.2.0.22-rc incorrectly generated "STATUS_SERVER" as "STATUS_SEVER". To be compatible with those versions, tools should accept both. Actions for STATUS_GENERAL events can be as follows: CLOCK_JUMPED "TIME=NUM" Tor spent enough time without CPU cycles that it has closed all its circuits and will establish them anew. This typically happens when a laptop goes to sleep and then wakes up again. It also happens when the system is swapping so heavily that Tor is starving. The "time" argument specifies the number of seconds Tor thinks it was unconscious for (or alternatively, the number of seconds it went back in time). This status event is sent as NOTICE severity normally, but WARN severity if Tor is acting as a server currently. {Recommendation for controller: ignore it, since we don't really know what the user should do anyway. Hm.} DANGEROUS_VERSION "CURRENT=version" "REASON=NEW/OBSOLETE/UNRECOMMENDED" "RECOMMENDED=\"version, version, ...\"" Tor has found that directory servers don't recommend its version of the Tor software. RECOMMENDED is a comma-and-space-separated string of Tor versions that are recommended. REASON is NEW if this version of Tor is newer than any recommended version, OBSOLETE if this version of Tor is older than any recommended version, and UNRECOMMENDED if some recommended versions of Tor are newer and some are older than this version. (The "OBSOLETE" reason was called "OLD" from Tor 0.1.2.3-alpha up to and including 0.2.0.12-alpha.) {Controllers may want to suggest that the user upgrade OLD or UNRECOMMENDED versions. NEW versions may be known-insecure, or may simply be development versions.} TOO_MANY_CONNECTIONS "CURRENT=NUM" Tor has reached its ulimit -n or whatever the native limit is on file descriptors or sockets. CURRENT is the number of sockets Tor currently has open. The user should really do something about this. The "current" argument shows the number of connections currently open. {Controllers may recommend that the user increase the limit, or increase it for them. Recommendations should be phrased in an OS-appropriate way and automated when possible.} BUG "REASON=STRING" Tor has encountered a situation that its developers never expected, and the developers would like to learn that it happened. Perhaps the controller can explain this to the user and encourage her to file a bug report? {Controllers should log bugs, but shouldn't annoy the user in case a bug appears frequently.} CLOCK_SKEW SKEW="+" / "-" SECONDS MIN_SKEW="+" / "-" SECONDS. SOURCE="DIRSERV:" IP ":" Port / "NETWORKSTATUS:" IP ":" Port / "OR:" IP ":" Port / "CONSENSUS" If "SKEW" is present, it's an estimate of how far we are from the time declared in the source. (In other words, if we're an hour in the past, the value is -3600.) "MIN_SKEW" is present, it's a lower bound. If the source is a DIRSERV, we got the current time from a connection to a dirserver. If the source is a NETWORKSTATUS, we decided we're skewed because we got a v2 networkstatus from far in the future. If the source is OR, the skew comes from a NETINFO cell from a connection to another relay. If the source is CONSENSUS, we decided we're skewed because we got a networkstatus consensus from the future. {Tor should send this message to controllers when it thinks the skew is so high that it will interfere with proper Tor operation. Controllers shouldn't blindly adjust the clock, since the more accurate source of skew info (DIRSERV) is currently unauthenticated.} BAD_LIBEVENT "METHOD=" libevent method "VERSION=" libevent version "BADNESS=" "BROKEN" / "BUGGY" / "SLOW" "RECOVERED=" "NO" / "YES" Tor knows about bugs in using the configured event method in this version of libevent. "BROKEN" libevents won't work at all; "BUGGY" libevents might work okay; "SLOW" libevents will work fine, but not quickly. If "RECOVERED" is YES, Tor managed to switch to a more reliable (but probably slower!) libevent method. {Controllers may want to warn the user if this event occurs, though generally it's the fault of whoever built the Tor binary and there's not much the user can do besides upgrade libevent or upgrade the binary.} DIR_ALL_UNREACHABLE Tor believes that none of the known directory servers are reachable -- this is most likely because the local network is down or otherwise not working, and might help to explain for the user why Tor appears to be broken. {Controllers may want to warn the user if this event occurs; further action is generally not possible.} CONSENSUS_ARRIVED Tor has received and validated a new consensus networkstatus. (This event can be delayed a little while after the consensus is received, if Tor needs to fetch certificates.) Actions for STATUS_CLIENT events can be as follows: BOOTSTRAP "PROGRESS=" num "TAG=" Keyword "SUMMARY=" String ["WARNING=" String "REASON=" Keyword "COUNT=" num "RECOMMENDATION=" Keyword ] Tor has made some progress at establishing a connection to the Tor network, fetching directory information, or making its first circuit; or it has encountered a problem while bootstrapping. This status event is especially useful for users with slow connections or with connectivity problems. "Progress" gives a number between 0 and 100 for how far through the bootstrapping process we are. "Summary" is a string that can be displayed to the user to describe the *next* task that Tor will tackle, i.e., the task it is working on after sending the status event. "Tag" is a string that controllers can use to recognize bootstrap phases, if they want to do something smarter than just blindly displaying the summary string; see Section 5 for the current tags that Tor issues. The StatusSeverity describes whether this is a normal bootstrap phase (severity notice) or an indication of a bootstrapping problem (severity warn). For bootstrap problems, we include the same progress, tag, and summary values as we would for a normal bootstrap event, but we also include "warning", "reason", "count", and "recommendation" key/value combos. The "count" number tells how many bootstrap problems there have been so far at this phase. The "reason" string lists one of the reasons allowed in the ORCONN event. The "warning" argument string with any hints Tor has to offer about why it's having troubles bootstrapping. The "reason" values are long-term-stable controller-facing tags to identify particular issues in a bootstrapping step. The warning strings, on the other hand, are human-readable. Controllers SHOULD NOT rely on the format of any warning string. Currently the possible values for "recommendation" are either "ignore" or "warn" -- if ignore, the controller can accumulate the string in a pile of problems to show the user if the user asks; if warn, the controller should alert the user that Tor is pretty sure there's a bootstrapping problem. Currently Tor uses recommendation=ignore for the first nine bootstrap problem reports for a given phase, and then uses recommendation=warn for subsequent problems at that phase. Hopefully this is a good balance between tolerating occasional errors and reporting serious problems quickly. ENOUGH_DIR_INFO Tor now knows enough network-status documents and enough server descriptors that it's going to start trying to build circuits now. {Controllers may want to use this event to decide when to indicate progress to their users, but should not interrupt the user's browsing to tell them so.} NOT_ENOUGH_DIR_INFO We discarded expired statuses and router descriptors to fall below the desired threshold of directory information. We won't try to build any circuits until ENOUGH_DIR_INFO occurs again. {Controllers may want to use this event to decide when to indicate progress to their users, but should not interrupt the user's browsing to tell them so.} CIRCUIT_ESTABLISHED Tor is able to establish circuits for client use. This event will only be sent if we just built a circuit that changed our mind -- that is, prior to this event we didn't know whether we could establish circuits. {Suggested use: controllers can notify their users that Tor is ready for use as a client once they see this status event. [Perhaps controllers should also have a timeout if too much time passes and this event hasn't arrived, to give tips on how to troubleshoot. On the other hand, hopefully Tor will send further status events if it can identify the problem.]} CIRCUIT_NOT_ESTABLISHED "REASON=" "EXTERNAL_ADDRESS" / "DIR_ALL_UNREACHABLE" / "CLOCK_JUMPED" We are no longer confident that we can build circuits. The "reason" keyword provides an explanation: which other status event type caused our lack of confidence. {Controllers may want to use this event to decide when to indicate progress to their users, but should not interrupt the user's browsing to do so.} [Note: only REASON=CLOCK_JUMPED is implemented currently.] DANGEROUS_PORT "PORT=" port "RESULT=" "REJECT" / "WARN" A stream was initiated to a port that's commonly used for vulnerable-plaintext protocols. If the Result is "reject", we refused the connection; whereas if it's "warn", we allowed it. {Controllers should warn their users when this occurs, unless they happen to know that the application using Tor is in fact doing so correctly (e.g., because it is part of a distributed bundle). They might also want some sort of interface to let the user configure their RejectPlaintextPorts and WarnPlaintextPorts config options.} DANGEROUS_SOCKS "PROTOCOL=" "SOCKS4" / "SOCKS5" "ADDRESS=" IP:port A connection was made to Tor's SOCKS port using one of the SOCKS approaches that doesn't support hostnames -- only raw IP addresses. If the client application got this address from gethostbyname(), it may be leaking target addresses via DNS. {Controllers should warn their users when this occurs, unless they happen to know that the application using Tor is in fact doing so correctly (e.g., because it is part of a distributed bundle).} SOCKS_UNKNOWN_PROTOCOL "DATA=string" A connection was made to Tor's SOCKS port that tried to use it for something other than the SOCKS protocol. Perhaps the user is using Tor as an HTTP proxy? The DATA is the first few characters sent to Tor on the SOCKS port. {Controllers may want to warn their users when this occurs: it indicates a misconfigured application.} SOCKS_BAD_HOSTNAME "HOSTNAME=QuotedString" Some application gave us a funny-looking hostname. Perhaps it is broken? In any case it won't work with Tor and the user should know. {Controllers may want to warn their users when this occurs: it usually indicates a misconfigured application.} Actions for STATUS_SERVER can be as follows: EXTERNAL_ADDRESS "ADDRESS=IP" "HOSTNAME=NAME" "METHOD=CONFIGURED/DIRSERV/RESOLVED/INTERFACE/GETHOSTNAME" Our best idea for our externally visible IP has changed to 'IP'. If 'HOSTNAME' is present, we got the new IP by resolving 'NAME'. If the method is 'CONFIGURED', the IP was given verbatim as a configuration option. If the method is 'RESOLVED', we resolved the Address configuration option to get the IP. If the method is 'GETHOSTNAME', we resolved our hostname to get the IP. If the method is 'INTERFACE', we got the address of one of our network interfaces to get the IP. If the method is 'DIRSERV', a directory server told us a guess for what our IP might be. {Controllers may want to record this info and display it to the user.} CHECKING_REACHABILITY "ORADDRESS=IP:port" "DIRADDRESS=IP:port" We're going to start testing the reachability of our external OR port or directory port. {This event could affect the controller's idea of server status, but the controller should not interrupt the user to tell them so.} REACHABILITY_SUCCEEDED "ORADDRESS=IP:port" "DIRADDRESS=IP:port" We successfully verified the reachability of our external OR port or directory port (depending on which of ORADDRESS or DIRADDRESS is given.) {This event could affect the controller's idea of server status, but the controller should not interrupt the user to tell them so.} GOOD_SERVER_DESCRIPTOR We successfully uploaded our server descriptor to at least one of the directory authorities, with no complaints. {Originally, the goal of this event was to declare "every authority has accepted the descriptor, so there will be no complaints about it." But since some authorities might be offline, it's harder to get certainty than we had thought. As such, this event is equivalent to ACCEPTED_SERVER_DESCRIPTOR below. Controllers should just look at ACCEPTED_SERVER_DESCRIPTOR and should ignore this event for now.} SERVER_DESCRIPTOR_STATUS "STATUS=" "LISTED" / "UNLISTED" We just got a new networkstatus consensus, and whether we're in it or not in it has changed. Specifically, status is "listed" if we're listed in it but previous to this point we didn't know we were listed in a consensus; and status is "unlisted" if we thought we should have been listed in it (e.g. we were listed in the last one), but we're not. {Moving from listed to unlisted is not necessarily cause for alarm. The relay might have failed a few reachability tests, or the Internet might have had some routing problems. So this feature is mainly to let relay operators know when their relay has successfully been listed in the consensus.} [Not implemented yet. We should do this in 0.2.2.x. -RD] NAMESERVER_STATUS "NS=addr" "STATUS=" "UP" / "DOWN" "ERR=" message One of our nameservers has changed status. {This event could affect the controller's idea of server status, but the controller should not interrupt the user to tell them so.} NAMESERVER_ALL_DOWN All of our nameservers have gone down. {This is a problem; if it happens often without the nameservers coming up again, the user needs to configure more or better nameservers.} DNS_HIJACKED Our DNS provider is providing an address when it should be saying "NOTFOUND"; Tor will treat the address as a synonym for "NOTFOUND". {This is an annoyance; controllers may want to tell admins that their DNS provider is not to be trusted.} DNS_USELESS Our DNS provider is giving a hijacked address instead of well-known websites; Tor will not try to be an exit node. {Controllers could warn the admin if the server is running as an exit server: the admin needs to configure a good DNS server. Alternatively, this happens a lot in some restrictive environments (hotels, universities, coffeeshops) when the user hasn't registered.} BAD_SERVER_DESCRIPTOR "DIRAUTH=addr:port" "REASON=string" A directory authority rejected our descriptor. Possible reasons include malformed descriptors, incorrect keys, highly skewed clocks, and so on. {Controllers should warn the admin, and try to cope if they can.} ACCEPTED_SERVER_DESCRIPTOR "DIRAUTH=addr:port" A single directory authority accepted our descriptor. // actually notice {This event could affect the controller's idea of server status, but the controller should not interrupt the user to tell them so.} REACHABILITY_FAILED "ORADDRESS=IP:port" "DIRADDRESS=IP:port" We failed to connect to our external OR port or directory port successfully. {This event could affect the controller's idea of server status. The controller should warn the admin and suggest reasonable steps to take.} 4.1.11. Our set of guard nodes has changed Syntax: "650" SP "GUARD" SP Type SP Name SP Status ... CRLF Type = "ENTRY" Name = The (possibly verbose) nickname of the guard affected. Status = "NEW" | "UP" | "DOWN" | "BAD" | "GOOD" | "DROPPED" [explain states. XXX] 4.1.12. Network status has changed Syntax: "650" "+" "NS" CRLF 1*NetworkStatus "." CRLF "650" SP "OK" CRLF The event is used whenever our local view of a relay status changes. This happens when we get a new v3 consensus (in which case the entries we see are a duplicate of what we see in the NEWCONSENSUS event, below), but it also happens when we decide to mark a relay as up or down in our local status, for example based on connection attempts. [First added in 0.1.2.3-alpha] 4.1.13. Bandwidth used on an application stream The syntax is: "650" SP "STREAM_BW" SP StreamID SP BytesWritten SP BytesRead CRLF BytesWritten = 1*DIGIT BytesRead = 1*DIGIT BytesWritten and BytesRead are the number of bytes written and read by the application since the last STREAM_BW event on this stream. Note that from Tor's perspective, *reading* a byte on a stream means that the application *wrote* the byte. That's why the order of "written" vs "read" is opposite for stream_bw events compared to bw events. These events are generated about once per second per stream; no events are generated for streams that have not written or read. These events apply only to streams entering Tor (such as on a SOCKSPort, TransPort, or so on). They are not generated for exiting streams. 4.1.14. Per-country client stats The syntax is: "650" SP "CLIENTS_SEEN" SP TimeStarted SP CountrySummary CRLF We just generated a new summary of which countries we've seen clients from recently. The controller could display this for the user, e.g. in their "relay" configuration window, to give them a sense that they are actually being useful. Currently only bridge relays will receive this event, but once we figure out how to sufficiently aggregate and sanitize the client counts on main relays, we might start sending these events in other cases too. TimeStarted is a quoted string indicating when the reported summary counts from (in GMT). The CountrySummary keyword has as its argument a comma-separated, possibly empty set of "countrycode=count" pairs. For example (without linebreak), 650-CLIENTS_SEEN TimeStarted="2008-12-25 23:50:43" CountrySummary=us=16,de=8,uk=8 4.1.15. New consensus networkstatus has arrived. The syntax is: "650" "+" "NEWCONSENSUS" CRLF 1*NetworkStatus "." CRLF "650" SP "OK" CRLF A new consensus networkstatus has arrived. We include NS-style lines for every relay in the consensus. NEWCONSENSUS is a separate event from the NS event, because the list here represents every usable relay: so any relay *not* mentioned in this list is implicitly no longer recommended. [First added in 0.2.1.13-alpha] 4.1.16. New circuit buildtime has been set. The syntax is: "650" SP "BUILDTIMEOUT_SET" SP Type SP "TOTAL_TIMES=" Total SP "TIMEOUT_MS=" Timeout SP "XM=" Xm SP "ALPHA=" Alpha SP "CUTOFF_QUANTILE=" Quantile SP "TIMEOUT_RATE=" Rate CRLF Type = "COMPUTED" / "RESET" / "SUSPENDED" / "DISCARD" / "RESUME" Total = Integer count of timeouts stored Timeout = Integer timeout in milliseconds Xm = Estimated integer Pareto parameter Xm in milliseconds Alpha = Estimated floating point Paredo paremter alpha Quantile = Floating point CDF quantile cutoff point for this timeout Rate = Floating point ratio of circuits that timeout A new circuit build timeout time has been set. If Type is "COMPUTED", Tor has computed the value based on historical data. If Type is "RESET", initialization or drastic network changes have caused Tor to reset the timeout back to the default, to relearn again. If Type is "SUSPENDED", Tor has detected a loss of network connectivity and has temporarily changed the timeout value to the default until the network recovers. If type is "DISCARD", Tor has decided to discard timeout values that likely happened while the network was down. If type is "RESUME", Tor has decided to resume timeout calculation. The Total value is the count of circuit build times Tor used in computing this value. It is capped internally at the maximum number of build times Tor stores (NCIRCUITS_TO_OBSERVE). The Timeout itself is provided in milliseconds. Internally, Tor rounds this value to the nearest second before using it. [First added in 0.2.2.7-alpha] 5. Implementation notes 5.1. Authentication If the control port is open and no authentication operation is enabled, Tor trusts any local user that connects to the control port. This is generally a poor idea. If the 'CookieAuthentication' option is true, Tor writes a "magic cookie" file named "control_auth_cookie" into its data directory. To authenticate, the controller must send the contents of this file, encoded in hexadecimal. If the 'HashedControlPassword' option is set, it must contain the salted hash of a secret password. The salted hash is computed according to the S2K algorithm in RFC 2440 (OpenPGP), and prefixed with the s2k specifier. This is then encoded in hexadecimal, prefixed by the indicator sequence "16:". Thus, for example, the password 'foo' could encode to: 16:660537E3E1CD49996044A3BF558097A981F539FEA2F9DA662B4626C1C2 ++++++++++++++++**^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ salt hashed value indicator You can generate the salt of a password by calling 'tor --hash-password ' or by using the example code in the Python and Java controller libraries. To authenticate under this scheme, the controller sends Tor the original secret that was used to generate the password, either as a quoted string or encoded in hexadecimal. 5.2. Don't let the buffer get too big. If you ask for lots of events, and 16MB of them queue up on the buffer, the Tor process will close the socket. 5.3. Backward compatibility with v0 control protocol. The 'version 0' control protocol was replaced in Tor 0.1.1.x. Support was removed in Tor 0.2.0.x. Every non-obsolete version of Tor now supports the version 1 control protocol. For backward compatibility with the "version 0" control protocol, Tor used to check whether the third octet of the first command is zero. (If it was, Tor assumed that version 0 is in use.) This compatibility was removed in Tor 0.1.2.16 and 0.2.0.4-alpha. 5.4. Tor config options for use by controllers Tor provides a few special configuration options for use by controllers. These options can be set and examined by the SETCONF and GETCONF commands, but are not saved to disk by SAVECONF. Generally, these options make Tor unusable by disabling a portion of Tor's normal operations. Unless a controller provides replacement functionality to fill this gap, Tor will not correctly handle user requests. __AllDirOptionsPrivate If true, Tor will try to launch all directory operations through anonymous connections. (Ordinarily, Tor only tries to anonymize requests related to hidden services.) This option will slow down directory access, and may stop Tor from working entirely if it does not yet have enough directory information to build circuits. (Boolean. Default: "0".) __DisablePredictedCircuits If true, Tor will not launch preemptive "general-purpose" circuits for streams to attach to. (It will still launch circuits for testing and for hidden services.) (Boolean. Default: "0".) __LeaveStreamsUnattached If true, Tor will not automatically attach new streams to circuits; instead, the controller must attach them with ATTACHSTREAM. If the controller does not attach the streams, their data will never be routed. (Boolean. Default: "0".) __HashedControlSessionPassword As HashedControlPassword, but is not saved to the torrc file by SAVECONF. Added in Tor 0.2.0.20-rc. __ReloadTorrcOnSIGHUP If this option is true (the default), we reload the torrc from disk every time we get a SIGHUP (from the controller or via a signal). Otherwise, we don't. This option exists so that controllers can keep their options from getting overwritten when a user sends Tor a HUP for some other reason (for example, to rotate the logs). (Boolean. Default: "1") 5.5. Phases from the Bootstrap status event. This section describes the various bootstrap phases currently reported by Tor. Controllers should not assume that the percentages and tags listed here will continue to match up, or even that the tags will stay in the same order. Some phases might also be skipped (not reported) if the associated bootstrap step is already complete, or if the phase no longer is necessary. Only "starting" and "done" are guaranteed to exist in all future versions. Current Tor versions enter these phases in order, monotonically. Future Tors MAY revisit earlier stages. Phase 0: tag=starting summary="Starting" Tor starts out in this phase. Phase 5: tag=conn_dir summary="Connecting to directory mirror" Tor sends this event as soon as Tor has chosen a directory mirror -- e.g. one of the authorities if bootstrapping for the first time or after a long downtime, or one of the relays listed in its cached directory information otherwise. Tor will stay at this phase until it has successfully established a TCP connection with some directory mirror. Problems in this phase generally happen because Tor doesn't have a network connection, or because the local firewall is dropping SYN packets. Phase 10: tag=handshake_dir summary="Finishing handshake with directory mirror" This event occurs when Tor establishes a TCP connection with a relay used as a directory mirror (or its https proxy if it's using one). Tor remains in this phase until the TLS handshake with the relay is finished. Problems in this phase generally happen because Tor's firewall is doing more sophisticated MITM attacks on it, or doing packet-level keyword recognition of Tor's handshake. Phase 15: tag=onehop_create summary="Establishing one-hop circuit for dir info" Once TLS is finished with a relay, Tor will send a CREATE_FAST cell to establish a one-hop circuit for retrieving directory information. It will remain in this phase until it receives the CREATED_FAST cell back, indicating that the circuit is ready. Phase 20: tag=requesting_status summary="Asking for networkstatus consensus" Once we've finished our one-hop circuit, we will start a new stream for fetching the networkstatus consensus. We'll stay in this phase until we get the 'connected' relay cell back, indicating that we've established a directory connection. Phase 25: tag=loading_status summary="Loading networkstatus consensus" Once we've established a directory connection, we will start fetching the networkstatus consensus document. This could take a while; this phase is a good opportunity for using the "progress" keyword to indicate partial progress. This phase could stall if the directory mirror we picked doesn't have a copy of the networkstatus consensus so we have to ask another, or it does give us a copy but we don't find it valid. Phase 40: tag=loading_keys summary="Loading authority key certs" Sometimes when we've finished loading the networkstatus consensus, we find that we don't have all the authority key certificates for the keys that signed the consensus. At that point we put the consensus we fetched on hold and fetch the keys so we can verify the signatures. Phase 45 tag=requesting_descriptors summary="Asking for relay descriptors" Once we have a valid networkstatus consensus and we've checked all its signatures, we start asking for relay descriptors. We stay in this phase until we have received a 'connected' relay cell in response to a request for descriptors. Phase 50: tag=loading_descriptors summary="Loading relay descriptors" We will ask for relay descriptors from several different locations, so this step will probably make up the bulk of the bootstrapping, especially for users with slow connections. We stay in this phase until we have descriptors for at least 1/4 of the usable relays listed in the networkstatus consensus. This phase is also a good opportunity to use the "progress" keyword to indicate partial steps. Phase 80: tag=conn_or summary="Connecting to entry guard" Once we have a valid consensus and enough relay descriptors, we choose some entry guards and start trying to build some circuits. This step is similar to the "conn_dir" phase above; the only difference is the context. If a Tor starts with enough recent cached directory information, its first bootstrap status event will be for the conn_or phase. Phase 85: tag=handshake_or summary="Finishing handshake with entry guard" This phase is similar to the "handshake_dir" phase, but it gets reached if we finish a TCP connection to a Tor relay and we have already reached the "conn_or" phase. We'll stay in this phase until we complete a TLS handshake with a Tor relay. Phase 90: tag=circuit_create summary="Establishing circuits" Once we've finished our TLS handshake with an entry guard, we will set about trying to make some 3-hop circuits in case we need them soon. Phase 100: tag=done summary="Done" A full 3-hop exit circuit has been established. Tor is ready to handle application connections now.