Roger Dingledine
ceb3d4d578
no measurement circs if not enough build times
...
In the first 100 circuits, our timeout_ms and close_ms
are the same. So we shouldn't transition circuits to purpose
CIRCUIT_PURPOSE_C_MEASURE_TIMEOUT, since they will just timeout again
next time we check.
2010-09-29 18:05:10 -04:00
Roger Dingledine
7f10707c42
refactor and recomment; no actual changes
2010-09-29 18:01:22 -04:00
Roger Dingledine
355fc63790
Merge branch 'maint-0.2.2'
2010-09-29 17:21:43 -04:00
Roger Dingledine
48cd096276
Merge commit 'mikeperry/bug1739' into maint-0.2.2
2010-09-29 17:17:59 -04:00
Roger Dingledine
474e4d2722
Merge commit 'mikeperry/bug1740' into maint-0.2.2
2010-09-29 17:05:38 -04:00
Mike Perry
f1b0e4e4b4
Add changes file.
2010-09-29 11:49:43 -07:00
Mike Perry
4324bb1b21
Cap the circuit build timeout to the max time we've seen.
...
Also, cap the measurement timeout to 2X the max we've seen.
2010-09-29 11:49:43 -07:00
Mike Perry
11910cf5b3
Do away with the complexity of the network liveness detection.
...
We really should ignore any timeouts that have *no* network activity for their
entire measured lifetime, now that we have the 95th percentile measurement
changes. Usually this is up to a minute, even on fast connections.
2010-09-29 11:49:43 -07:00
Mike Perry
0744a175af
Fix state checks on liveness handling.
...
If we really want all this complexity for these stages here, we need to handle
it better for people with large timeouts. It should probably go away, though.
2010-09-29 11:49:43 -07:00
Mike Perry
9a77743b7b
Fix non-live condition checks.
...
Rechecking the timeout condition was foolish, because it is checked on the
same codepath. It was also wrong, because we didn't round.
Also, the liveness check itself should be <, and not <=, because we only have
1 second resolution.
2010-09-29 11:49:31 -07:00
Mike Perry
4caf39f1c8
Add changes file.
2010-09-29 11:46:36 -07:00
Mike Perry
c5b5643965
Send control port events for timeouts.
...
We now differentiate between timeouts and cutoffs by the REASON string and
the PURPOSE string.
2010-09-29 11:46:36 -07:00
Mike Perry
caba3bc57e
Add changes file.
2010-09-29 11:41:35 -07:00
Mike Perry
5aa4564ab9
Only count timeout data for 3 hop circuits.
...
Use 4/3 of this timeout value for 4 hop circuits, and use half of it for
canabalized circuits.
2010-09-29 11:41:27 -07:00
Roger Dingledine
0ed8d5a537
allow countries and IP addresses in EntryNodes
2010-09-29 03:00:06 -04:00
Roger Dingledine
50720a9a4f
make c612ddee compile with old libevents
2010-09-29 02:50:46 -04:00
Nick Mathewson
703eb087f5
Merge remote branch 'origin/maint-0.2.2'
2010-09-29 00:38:44 -04:00
Roger Dingledine
a58610a87e
even more comment
2010-09-28 23:50:56 -04:00
Nick Mathewson
f3e8bc391a
Remove the has_old_dnsworkers flag.
2010-09-28 23:37:45 -04:00
Roger Dingledine
512433346f
improve code comments, based on comments from nick
2010-09-28 23:27:00 -04:00
Roger Dingledine
7e644b3f69
a changelog entry for the entrynodes retry mess
2010-09-28 22:49:36 -04:00
Roger Dingledine
9997676802
handle ugly edge case in retrying entrynodes
...
Specifically, a circ attempt that we'd launched while the network was
down could timeout after we've marked our entrynodes up, marking them
back down again. The fix is to annotate as bad the OR conns that were
around before we did the retry, so if a circuit that's attached to them
times out we don't do anything about it.
2010-09-28 22:32:38 -04:00
Roger Dingledine
7de1caa33f
Actually notice when our last entrynode goes down
...
Otherwise we'd never set have_minimum_dir_info to false, so the
"optimistic retry" would never trigger.
2010-09-28 21:59:31 -04:00
Roger Dingledine
bb22360bad
optimistically retry EntryNodes on socks request
...
We used to mark all our known bridges up when they're all down and we
get a new socks request. Now do that when we've set EntryNodes too.
2010-09-28 19:10:23 -04:00
Roger Dingledine
8bac188572
remove a redundant assert
2010-09-28 19:10:22 -04:00
Roger Dingledine
127f37ad29
refactor; no actual changes
2010-09-28 19:10:22 -04:00
Roger Dingledine
8d1fe50284
Merge branch 'maint-0.2.2'
2010-09-28 18:42:04 -04:00
Roger Dingledine
09a715bb72
Merge branch 'maint-0.2.1' into maint-0.2.2
2010-09-28 18:37:55 -04:00
Roger Dingledine
339993b409
actually retry bridges when your network goes away
2010-09-28 18:36:15 -04:00
Nick Mathewson
3efaa30727
Merge branch 'iocp_option'
2010-09-28 14:42:52 -04:00
Nick Mathewson
c58b7a1095
Merge remote branch 'origin/maint-0.2.2'
2010-09-28 14:42:50 -04:00
Nick Mathewson
73d93c033d
Autodetect the number of CPUs when possible if NumCPUs==0
...
This is needed for IOCP, since telling the IOCP backend about all
your CPUs is a good idea. It'll also come in handy with asn's
multithreaded crypto stuff, and for people who run servers without
reading the manual.
2010-09-28 14:42:21 -04:00
Nick Mathewson
c612ddee17
Add a new option to enable/disable IOCP support
2010-09-28 14:01:45 -04:00
Nick Mathewson
6d8f2885d8
Remove the completely outdated Win32Build directory
...
If you want to try to build Tor with a recent MSVC, you are better
off starting from scratch than trying to use the project files that
we used to build 2006 versions of Tor using 2006 versions of MSVC.
2010-09-28 13:38:28 -04:00
Nick Mathewson
d6e255edbd
Merge branch 'microdesc_dl_v2'
2010-09-28 00:46:01 -04:00
Roger Dingledine
f006f02ca4
Merge branch 'maint-0.2.2'
2010-09-27 18:33:12 -04:00
Roger Dingledine
a467bf5fbb
a dir-spec entry for refuseunknownexits
...
plus quiet a log line
2010-09-27 18:32:09 -04:00
Nick Mathewson
d45b912058
Clean long-unlisted microdescs from the cache
2010-09-27 18:05:01 -04:00
Nick Mathewson
3a492d31d5
Download microdescriptors if you're a cache
...
This commit adds some functions to see what microdescriptors we're missing,
and adds fetch-microdesc/store-microdesc logic to the directory code.
2010-09-27 18:04:44 -04:00
Nick Mathewson
e34d0d3365
When updating routerdesc downloads, look specifically at the ns consensus
...
This will be needed when "get_live_consensus" potentially returns a
microdesc consensus.
2010-09-27 18:04:44 -04:00
Nick Mathewson
9f5b752e4f
Actually parse the m lines from a microdesc consensus
2010-09-27 18:04:44 -04:00
Nick Mathewson
4e0f7f4ffc
Code to download, parse, and store microdesc consensuses
2010-09-27 18:04:43 -04:00
Nick Mathewson
4bfc64ba1c
New function to grab a directory connection fetching a resource
...
We need this to tell if a given consensus flavor is being downloaded
or not.
2010-09-27 18:04:43 -04:00
Nick Mathewson
af7fab020a
Merge remote branch 'origin/maint-0.2.2'
...
Conflicts:
src/or/config.c
2010-09-27 17:52:20 -04:00
Roger Dingledine
8df3a90946
the actual changelog entry this time
2010-09-27 17:44:51 -04:00
Roger Dingledine
9d7f0badb5
changelog entry for bug1751
2010-09-27 17:44:00 -04:00
Nick Mathewson
614eeb378b
Merge remote branch 'sebastian/bug1964' into maint-0.2.2
2010-09-27 17:26:32 -04:00
Sebastian Hahn
c951830002
Fix a bridge segfault
...
When we enabled support to change statistic options without restarting
Tor we forgot to initialize geoip_countries. Fix that.
2010-09-27 23:19:25 +02:00
Nick Mathewson
7c83b0a2a2
Merge branch 'refuseunknown' into maint-0.2.2
2010-09-27 17:15:57 -04:00
Sebastian Hahn
8ac2de5ab9
Add RefuseUnknownExits to the manpage
2010-09-27 17:15:41 -04:00
