In 0.2.3.18-rc, we started warning on this case while building a
list of missing microdescriptor digests. That turned out to spam
the logs; instead let's warn at parse time.
Partial fix for bug 6404.
The spec requires that every router in a microdesc consensus have an
m line; we weren't obeying that spec.
This creates a new consensus method (13) to allow voting to continue
to work right. Partial fix for bug 6404; fix on 0.2.2.6-alpha.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
We can end up in dirserv_orconn_tls_done() with a node missing
routerinfo in at least two cases -- command_process_certs_cell() and
connection_or_check_valid_tls_handshake() -- and probably more.
You can say "struct foo_t" as much as you want, but you'd better not
have "typedef struct foo_t foo_t" more than once.
Fix for bug 6416. Bug not in any released version of Tor.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
The SMARTLIST_FOREACH macro is more convenient than BEGIN/END when
you have a nice short loop body, but using it for long bodies makes
your preprocessor tell the compiler that all the code is on the same
line. That causes grief, since compiler warnings and debugger lines
will all refer to that one line.
So, here's a new style rule: SMARTLIST_FOREACH blocks need to be
short.
- Add a changes/ file.
- Make it compile under --enable-gcc-warnings.
- Update the file-level documentation of src/or/transports.c.
- Only update descriptor if at least a managed proxy was configured.
- Add our external IP address to the extra-info descriptor instead of 0.0.0.0.
This could result in bizarre window values. Report and patch
contributed pseudymously. Fixes part of bug 6271. This bug was
introduced before the first Tor release, in svn commit r152.
(bug 6271, part a.)
This reverts commit c32ec9c425.
It turns out the two sides of the circuit don't actually stay in sync,
so it is perfectly normal for the circuit window on the exit relay to
grow to 2000+. We should fix that bug and then reconsider this patch.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
We were doing a tor_strclear() on client_keys_str when it might not
even be set.
Fix for bug 6255; bug not in any release of Tor. Thanks to katmagic
for finding this one!
The functions parse_{s,c}method_line() were using
tor_addr_port_lookup() which is capable of doing DNS lookups. DNS
lookups should not be necessary when parsing {C,S}METHOD lines.
We now catch bare {s that should be on the previous line with a do,
while, if, or for, and elses that should share a line with their
preceding }.
That is,
if (foo)
{
and
if (foo) {
...
}
else
are now detected.
We should think about maybe making Tor uncrustify-clean some day,
but configuring uncrustify is an exercise in bizarreness, and
reformatting huge gobs of Tor is always painful.
The code that detected the source of a remapped address checked that
an address mapping's source was a given rewrite rule if addr_orig had
no .exit, and addr did have a .exit after processing that rule. But
addr_orig was formatted for logging: it was not the original address
at all, but rather was the address escaped for logging and possibly
replaced with "[scrubbed]".
This new logic will correctly set ADDRMAPSRC_NONE in the case when the
address starts life as a .exit address, so that AllowDotExit can work
again.
Fixes bug 6211; bugfix on 0.2.3.17-beta
It turns out this can happen. Even though there is no reason for
connections to be marked but reading, we leave them reading anyway,
so warning here is unwarranted. Let's turn that back on once we do
something sensible and disable reading when we mark. Bugfix for
6203 on Tor 0.2.3.17-beta.
Thanks to cypherpunks for pointing out the general stupidity of the
original code here.
Now it's an orthodox "goto err/done" exit path, and it isn't some
screwy thing where we stick err/done at the end of a loop and
duplicate our cleanup code.
Previously, a directory would check the latest NS consensus for
having the signatures the client wanted, and use that consensus's
valid_until time to set the HTTP lifetime. With this patch, the
directory looks at NS consensus or the microdesc consensus,
depending on what the client asked for.
I saw 72% on a test run with 26 circuits. 70% might be a little close to the
line. That, or min_circs is too low and we need to be more patient. We still
need to test/simulate more.
The defense counts the circuit failure rate for each guard for the past N
circuits. Failure is defined as the ability to complete a first hop, but not
finish completing the circuit all the way to the exit.
If the failure rate exceeds a certain amount, a notice is emitted.
If it exceeds a greater amount, a warn is emitted and the guard is disabled.
These values are governed by consensus parameters which we intend to tune as
we perform experiments and statistical simulations.
The warning message of validate_pluggable_transports_config() is
superseded by the changes in the warning message of
connection_or_connect() when the proxy credentials can't be found.
There is a bug causing busy loops in Libevent and infinite loops in
the Shadow simulator. A connection that is marked for close, wants
to flush, is held open to flush, but is rate limited (the token
bucket is empty) triggers the bug.
This commit fixes the bug. Details are below.
This currently happens on read and write callbacks when the active
socket is marked for close. In this case, Tor doesn't actually try
to complete the read or write (it returns from those methods when
marked), but instead tries to clear the connection with
conn_close_if_marked(). Tor will not close a marked connection that
contains data: it must be flushed first. The bug occurs when this
flush operation on the marked connection can not occur because the
connection is rate-limited (its write token bucket is empty).
The fix is to detect when rate limiting is preventing a marked
connection from properly flushing. In this case, it should be
flagged as read/write_blocked_on_bandwidth and the read/write events
de-registered from Libevent. When the token bucket gets refilled, it
will check the associated read/write_blocked_on_bandwidth flag, and
add the read/write event back to Libevent, which will cause it to
fire. This time, it will be properly flushed and closed.
The reason that both read and write events are both de-registered
when the marked connection can not flush is because both result in
the same behavior. Both read/write events on marked connections will
never again do any actual reads/writes, and are only useful to
trigger the flush and close the connection. By setting the
associated read/write_blocked_on_bandwidth flag, we ensure that the
event will get added back to Libevent, properly flushed, and closed.
Why is this important? Every Shadow event occurs at a discrete time
instant. If Tor does not properly deregister Libevent events that
fire but result in Tor essentially doing nothing, Libevent will
repeatedly fire the event. In Shadow this means infinite loop,
outside of Shadow this means wasted CPU cycles.
From what I can tell, this configuration is usually a mistake, and
leads people to think that all their traffic is getting proxied when
in fact practically none of it is. Resolves the issue behind "bug"
4663.
The function is not guaranteed to NUL-terminate its output. It
*is*, however, guaranteed not to generate more than two bytes per
multibyte character (plus terminating nul), so the general approach
I'm taking is to try to allocate enough space, AND to manually add a
NUL at the end of each buffer just in case I screwed up the "enough
space" thing.
Fixes bug 5909.
This feature can make Tor relays less identifiable by their use of the
mod_ssl DH group, but at the cost of some usability (#4721) and bridge
tracing (#6087) regressions.
We should try to turn this on by default again if we find that the
mod_ssl group is uncommon and/or we move to a different DH group size
(see #6088). Before we can do so, we need a fix for bugs #6087 and
Resolves ticket #5598 for now.
These stats are currently discarded, but we might as well
hard-disable them on bridges, to be clean.
Fix for bug 5824; bugfix on 0.2.1.17-rc.
Patch originally by Karsten Loesing.
Also, try to resolve some doxygen issues. First, define a magic
"This is doxygen!" macro so that we take the correct branch in
various #if/#else/#endifs in order to get the right documentation.
Second, add in a few grouping @{ and @} entries in order to get some
variables and fields to get grouped together.
This code shouldn't have any effect in 0.2.3, since we already accept
(and handle) data received while we are expecting a renegotiation.
(That's because the 0.2.3.x handshake _does_ have data there instead of
the renegotiation.)
I'm leaving it in anyway, since if it breaks anything, we'll want it
broken in master too so we can find out about it. I added an XXX023
comment so that we can come back later and fix that.
This fixes a DoS issue where a client could send so much data in 5
minutes that they exhausted the server's RAM. Fix for bug 5934 and
6007. Bugfix on 0.2.0.20-rc, which enabled the v2 handshake.
This solves bug 5283, where client traffic could get sent over the
same circuit as an anonymized connection to a directory, even if
that circuit used an exit node unsuitable for clients. By marking
the directory connection as needs_internal, we ensure that the
(non-internal!) client-traffic connection won't be sent over the
same circuit.
On Windows, getsockname() on a nonblocking apparently won't work
until the connection is done connecting. On XP, it seems to fail by
reporting success and declaring that your address is INADDR_ANY. On the
Win8 preview, though, it fails more loudly and says WSAEINVAL.
Fix for bug 5374; bugfix on 0.1.1.14-alpha.
