directory is the string that dirserv.c and directory.c deal with
routerlist is routerinfo's that are bundled together in routers.c
rename some of the get_routerlist functions to set_routerlist
preparing to break into router.c for stuff the router does,
and routerlist.c for handling routerlist.
svn:r886
never work.
fix vicious bug in choose_good_exit_server that caused it to *skip over*
pending circuits, and look only at *non-pending circuits*, when choosing
a good exit node for the new circuit.
bugfix: remove incorrect asserts in circuit_get_newest()
svn:r876
bugfix in connection_ap_can_use_exit: it was using the wrong port
bugfix: the OP now handles a port of '*' correctly when the IP is not
yet known and it's trying to guess whether a router's exit policy
might accept it.
we now don't ever pick exit routers which will reject *:*
attach_circuit now fails a new stream outright if it will never work.
when you get an 'end' cell that resolves an IP, now it will fail the circuit outright if no safe exit nodes exist for that IP.
don't try building a new circuit after an 'end' if a suitable one is
already on the way.
svn:r874
bugfix: keep going when a circ fails in circuit_n_conn_open
(make circuit_enumerate_by_naddr_nport obsolete)
bugfix: make circuit_n_conn_open only look at circ's that start at us
bugfix: only try circuit_n_conn_open if we're an OP. Otherwise we
expect connections to always already be up.
bugfix: when choosing path length, pay attention to whether the directory
says a router is down.
bugfix: when picking good exit, skip routers which are known to be down
(more work needs to be done on this one)
svn:r838
- Exit policies now support bitmasks (18.0.0.0/255.0.0.0) and bitcounts
18.0.0.0/8. Policies are parsed on startup, not when comparing to them.
- desired_path_len is now part of an opaque cpath_build_state_t structure.
- END_REASON_EXITPOLICY cells no longer include a port.
- RELAY_COMMAND_CONNECTED cells now include the IP address we've connected
to.
- connection_edge now has a client_dns cache to remember resolved addresses.
It gets populated by RELAY_COMMAND_CONNECTED cells and END_REASON_EXITPOLICY
cells. It gets used by connection_ap_handshake_send_begin. We don't
compare it to exit policies yet.
svn:r812
is a the first step in computing hops one step at a time. Next, we move
the responsibility for calling onion_extend_cpath into circuit.c
(Later, we may want to special-case onion_extend_cpath to treat entry
and exit routers differently.)
svn:r792
ERR is if something fatal just happened
WARNING is something bad happened, but we're still running. The bad thing
is either a bug in the code, an attack or buggy protocol/implementation
of the remote peer, etc. The operator should examine the bad thing and
try to correct it.
(No error or warning messages should be expected. I expect most people
to run on -l warning eventually.)
NOTICE is never ever used.
INFO means something happened (maybe bad, maybe ok), but there's nothing
you need to (or can) do about it.
DEBUG is for everything louder than INFO.
svn:r486
'buf_t' is now an opaque type defined in buffers.c .
Router descriptors now include all keys; routers generate keys as
needed on startup (in a newly defined "data directory"), and generate
their own descriptors. Descriptors are now self-signed.
Implementation is not complete: descriptors are never published; and
upon receiving a descriptor, the directory doesn't do anything with
it.
At least "routers.or" and orkeygen are now obsolete, BTW.
svn:r483
they used to be used for
* queueing relay cells at the edge of the network, when windows are empty
* queueing relay cells that arrive after an onion but before the onion
has been processed.
both of these uses are gone. so out they go.
svn:r315
circuits no longer queue more cells when the windows are empty --
they simply don't package it from the buffer if they're not going to want it.
we can restore this code later if we need to resume queueing.
svn:r294
on startup, it forks off a master dns handler, which forks off dns
slaves (like the apache model). slaves as spawned as load increases,
and then reused. excess slaves are not ever killed, currently.
implemented topics. each topic has a receive window in each direction
at each edge of the circuit, and sends sendme's at the data level, as
per before. each circuit also has receive windows in each direction at
each hop; an edge sends a circuit-level sendme as soon as enough data
cells have arrived (regardless of whether the data cells were flushed
to the exit conns). removed the 'connected' cell type, since it's now
a topic command within data cells.
at the edge of the circuit, there can be multiple connections associated
with a single circuit. you find them via the linked list conn->next_topic.
currently each new ap connection starts its own circuit, so we ought
to see comparable performance to what we had before. but that's only
because i haven't written the code to reattach to old circuits. please
try to break it as-is, and then i'll make it reuse the same circuit and
we'll try to break that.
svn:r152
this was a major faq, because it would fail with an error only on
the *server* side when the client-side time was wrong. the client would
simply not work.
svn:r145
we also queue data cells destined for a circuit that is
pending, and process them once the circuit opens
destroys reach into the queue and remove the pending onion,
along with its collected data cells
svn:r142
prkey is only fetched when it's needed
tor nodes who aren't dirservers now fetch directories and autoconnect
to new nodes listed in the directory
default role is a non-dirserver node
svn:r120
revamped the router reading section
reference counting for crypto pk env's (so we can dup them)
we now read and write pem pk keys from string rather than from FILE*,
in anticipation of fetching directories over a socket
(so now on startup we slurp in the whole file, then parse it as a string)
fixed a bug in the proxy side, where you could get some circuits
wedged if they showed up while the connection was being made
svn:r110
I modified new_route so we don't pick twins back-to-back in the path.
I also had to patch my previous uses of connection_twin_get_by_addr_port()
because they assumed that "addr" and "port" would be the same for a twin
as for the original router.
svn:r56
Each socket reads at most 'bandwidth' bytes per second sustained, but
can handle bursts of up to 10*bandwidth bytes.
Cells are now sent out at evenly-spaced intervals, with padding sent
out otherwise. Set Linkpadding=0 in the rc file to send cells as soon
as they're available (and to never send padding cells).
Added license/copyrights statements at the top of most files.
router->min and router->max have been merged into a single 'bandwidth'
value. We should make the routerinfo_t reflect this (want to do that,
Mat?)
As the bandwidth increases, and we want to stop sleeping more and more
frequently to send a single cell, cpu usage goes up. At 128kB/s we're
pretty much calling poll with a timeout of 1ms or even 0ms. The current
code takes a timeout of 0-9ms and makes it 10ms. prepare_for_poll()
handles everything that should have happened in the past, so as long as
our buffers don't get too full in that 10ms, we're ok.
Speaking of too full, if you run three servers at 100kB/s with -l debug,
it spends too much time printing debugging messages to be able to keep
up with the cells. The outbuf ultimately fills up and it kills that
connection. If you run with -l err, it works fine up through 500kB/s and
probably beyond. Down the road we'll want to teach it to recognize when
an outbuf is getting full, and back off.
svn:r50
The 'or' process can now be told (by the global_role variable) what
roles this server should play -- connect to all ORs, listen for ORs,
listen for OPs, listen for APs, or any combination.
* everything in /src/op/ is now obsolete.
* connection_ap.c now handles all interactions with application proxies
* "port" is now or_port, op_port, ap_port. But routers are still always
referenced (say, in conn_get_by_addr_port()) by addr / or_port. We
should make routers.c actually read these new ports (currently I've
kludged it so op_port = or_port+10, ap_port=or_port+20)
* circuits currently know if they're at the beginning of the path because
circ->cpath is set. They use this instead for crypts (both ways),
if it's set.
* I still obey the "send a 0 back to the AP when you're ready" protocol,
but I think we should phase it out. I can simply not read from the AP
socket until I'm ready.
I need to do a lot of cleanup work here, but the code appears to work, so
now's a good time for a checkin.
svn:r22
