In rend_service_intro_has_opened(), this is subject to a possible underflow
because of how the if() casts the results. In the case where the expiring
nodes list length is bigger than the number of IP circuits, we end up in the
following situation where the result will be cast to an unsigned int. For
instance, "5 - 6" is actually a BIG number.
Ultimately leading to closing IP circuits in a non stop loop.
Partially fixes#21302.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In rend_consider_services_intro_points(), we had a possible interger underflow
which could lead to creating a very large number of intro points. We had a
safe guard against that *except* if the expiring_nodes list was not empty
which is realistic thing.
This commit removes the check on the expiring nodes length being zero. It's
not because we have an empty list of expiring nodes that we don't want to open
new IPs. Prior to this check, we remove invalid IP nodes from the main list of
a service so it should be the only thing to look at when deciding if we need
to create new IP(s) or not.
Partially fixes#21302.
Signed-off-by: David Goulet <dgoulet@torproject.org>
An operator couldn't set the number of introduction point below the default
value which is 3. With this commit, from 0 to the hardcoded maximum is now
allowed.
Closes#21033
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 8a0ea3ee43 we added a
temp_service_list local variable to rend_config_services, but we
didn't add a corresponding "free" for it to all of the exit paths.
Fixes bug 20987; bugfix on 0.3.0.1-alpha.
First, this commit moves the code used to prune the service list when
reloading Tor (HUP signal for instance) to a function from
rend_config_services().
Second, fix bug #21054, improve the code by using the newly added
circuit_get_next_service_intro_circ() function instead of poking at the global
list directly and add _many_ more comments.
Fixes#21054.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This resolves two issues:
* the checks in rend_add_services were only being performed when adding
the service, and not when the service was validated,
(this meant that duplicate checks were not being performed, and some SETCONF
commands appeared to succeed when they actually failed), and
* if one service failed while services were being added, then the service
list would be left in an inconsistent state (tor dies when this happens,
but the code is cleaner now).
Fixes#20860.
Instead, refuse to start tor until the misconfigurations have been corrected.
Fixes bug 20559; bugfix on multiple commits in 0.2.7.1-alpha and earlier.
Instead, refuse to start tor if any hidden service key has been used in
a different hidden service anonymity mode.
Fixes bug 20638; bugfix on 17178 in 0.2.9.3-alpha; reported by ahf.
The original single onion service poisoning code checked poisoning state
in options_validate, and poisoned in options_act. This was problematic,
because the global array of hidden services had not been populated in
options_validate (and there were ordrering issues with hidden service
directory creation).
This patch fixes this issue in rend_service_check_dir_and_add, which:
* creates the directory, or checks permissions on an existing directory, then
* checks the poisoning state of the directory, then
* poisons the directory.
When validating, only the permissions checks and the poisoning state checks
are perfomed (the directory is not modified).
This patch doesn't cover every case; omitted cases are marked with
"XXXX prop271", as usual. It leaves both the old interface and the
new interface for guard status notification, since they don't
actually work in the same way: the new API wants to be told when a
circuit has failed or succeeded, whereas the old API wants to know
when a channel has failed or succeeded.
I ran into some trouble with directory guard stuff, since when we
pick the directory guard, we don't actually have a circuit to
associate it with. I solved that by allowing guard states to be
associated with directory connections, not just circuits.
(We only create HS directories if we are acting on the config.)
Log a BUG warning if the directories aren't present immediately before they
are used, then fail.
In order to implement proposal 224, we need the data structure rend_data_t to
be able to accomodate versionning that is the current version of hidden
service (2) and the new version (3) and future version.
For that, we implement a series of accessors and a downcast function to get
the v2 data structure. rend_data_t becomes a top level generic place holder.
The entire rend_data_t API has been moved to hs_common.{c|h} in order to
seperate code that is shared from between HS versions and unshared code (in
rendcommon.c).
Closes#19024
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
(Also, refactor the code to create a hidden service directory into a
separate funcion, so we don't have to duplicate it.)
Fixes bug 20484; bugfix on 0.2.9.3-alpha.
Use the following coccinelle script to change uses of
smartlist_add(sl, tor_strdup(str)) to
smartlist_add_strdup(sl, string) (coccinelle script from nickm
via bug 20048):
@@
expression a;
expression b;
@@
- smartlist_add
+ smartlist_add_strdup
(a,
- tor_strdup(
b
- )
)
* Check consistency between the two single onion torrc options
* Use the more relevant option each time we check for single onion mode
* Clarify log messages
* Clarify comments
* Otherwise, no behaviour change
Add experimental OnionServiceSingleHopMode and
OnionServiceNonAnonymousMode options. When both are set to 1, every
hidden service on a tor instance becomes a non-anonymous Single Onion
Service. Single Onions make one-hop (direct) connections to their
introduction and renzedvous points. One-hop circuits make Single Onion
servers easily locatable, but clients remain location-anonymous.
This is compatible with the existing hidden service implementation, and
works on the current tor network without any changes to older relays or
clients.
Implements proposal #260, completes ticket #17178. Patch by teor & asn.
squash! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! Implement Prop #260: Single Onion Services
Redesign single onion service poisoning.
When in OnionServiceSingleHopMode, each hidden service key is poisoned
(marked as non-anonymous) on creation by creating a poison file in the
hidden service directory.
Existing keys are considered non-anonymous if this file exists, and
anonymous if it does not.
Tor refuses to launch in OnionServiceSingleHopMode if any existing keys
are anonymous. Similarly, it refuses to launch in anonymous client mode
if any existing keys are non-anonymous.
Rewrite the unit tests to match and be more comprehensive.
Adds a bonus unit test for rend_service_load_all_keys().
When deleting an ephemeral HS, we were only iterating on circuit with an
OPEN state. However, it could be possible that an intro point circuit didn't
reached the open state yet.
This commit makes it that we close the circuit regardless of its state
except if it was already marked for close.
Fixes#18604
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tor stores client authorization cookies in two slightly different forms.
The service's client_keys file has the standard base64-encoded cookie,
including two chars of padding. The hostname file and the client remove
the two padding chars, and store an auth type flag in the unused bits.
The distinction makes no sense. Refactor all decoding to use the same
function, which will accept either form, and use a helper function for
encoding the truncated format.
When an HS process an INTRODUCE2 cell, we didn't validate if the IP address
of the rendezvous point was a local address. If it's the case, we end up
wasting resources by trying to extend to a local address which fails since
we do not allow that in circuit_extend().
This commit now rejects a rendezvous point that has a local address once
seen at the hidden service side unless ExtendAllowPrivateAddresses is set.
Fixes#8976
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The wrong list was used when looking up expired intro points in a rend
service object causing what we think could be reachability issues and
triggering a BUG log.
Fixes#16702
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Removes a check to PublishHidServDescriptors in
rend_consider_services_upload(). This allows descriptors to be
generated and stored in the local cache when PublishHidServDescriptor = 0.
Keep the PublishHidServDescriptors option check in
rend_consider_descriptor_republication(). We will never need to republish
a descriptor if we are not publishing descriptors to the HSDirs.
Service descriptors are now generated regardless of the the
PublishHidServDescriptors option. The generated descriptors are stored
in the service descriptor cache.
The PublishHidServDescriptors = 1 option now prevents descriptor
publication to the HSDirs rather than descriptor generation.
Deindent a block of code inside the PublishHidServDescriptors option
check in upload_service_descriptor(). Stylistic commit to make the
subsequent reworking of this code cleaner.
When cleaning up extra circuits that we've opened for performance reason, we
need to count all the introduction circuit and not only the established ones
else we can end up with too many introduction points.
This also adds the check for expiring nodes when serving an INTRODUCE cell
since it's possible old clients are still using them before we have time to
close them.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
To upload a HS descriptor, this commits makes it that we wait for all
introduction point to be fully established.
Else, the HS ends up uploading a descriptor that may contain intro points
that are not yet "valid" meaning not yet established or proven to work. It
could also trigger three uploads for the *same* descriptor if every intro
points takes more than 30 seconds to establish because of desc_is_dirty
being set at each intro established.
To achieve that, n_intro_points_established varialbe is added to the
rend_service_t object that is incremented when we established introduction
point and decremented when we remove a valid intro point from our list.
The condition to upload a descriptor also changes to test if all intro
points are ready by making sure we have equal or more wanted intro points
that are ready.
The desc_id_dirty flag is kept to be able to still use the
RendInitialPostPeriod option.
This partially fixes#13483.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
There is a case where if the introduction circuit fails but the node is
still in the consensus, we clean up the intro point and choose an other one.
This commit fixes that by trying to reuse the existing intro point with a
maximum value of retry.
A retry_nodes list is added to rend_services_introduce() and when we remove
an invalid intro points that fits the use case mentionned before, we add the
node to the retry list instead of removing it. Then, we retry on them before
creating new ones.
This means that the requirement to remove an intro point changes from "if no
intro circuit" to "if no intro circuit then if no node OR we've reached our
maximum circuit creation count".
For now, the maximum retries is set to 3 which it completely arbitrary. It
should also at some point be tied to the work done on detecting if our
network is down or not.
Fixes#8239
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The reasoning for refactoring this function is that removing the
introduction point adaptative algorithm (#4862) ended up changing quite a
bit rend_services_introduce(). Also, to fix some open issues (#8239, #8864
and #13483), this work had to be done.
First, this removes time_expiring variable in an intro point object and
INTRO_POINT_EXPIRATION_GRACE_PERIOD trickery and use an expiring_nodes list
where intro nodes that should expire are moved to that list and cleaned up
only once the new descriptor is successfully uploaded. The previous scheme
was adding complexity and arbitrary timing to when we expire an intro point.
We keep the intro points until we are sure that the new descriptor is
uploaded and thus ready to be used by clients. For this,
rend_service_desc_has_uploaded() is added to notify the HS subsystem that
the descriptor has been successfully uploaded. The purpose of this function
is to cleanup the expiring nodes and circuits if any.
Secondly, this adds the remove_invalid_intro_points() function in order to
split up rend_services_introduce() a bit with an extra modification to it
that fixes#8864. We do NOT close the circuit nor delete the intro point if
the circuit is still alive but the node was removed from the consensus. Due
to possible information leak, we let the circuit and intro point object
expire instead.
Finally, the whole code flow is simplified and large amount of documentation
has been added to mostly explain the why of things in there.
Fixes#8864
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This is a way to specify the amount of introduction points an hidden service
can have. Maximum value is 10 and the default is 3.
Fixes#4862
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
