This replaces the old FallbackConsensus notion, and should provide a
way -- assuming we pick reasonable nodes! -- to give clients
suggestions of placs to go to get their first consensus.
This is the simplest possible workaround: make it safe to call
circuit_cell_queue_clear() on a non-attached circuit, and make it
safe-but-a-LD_BUG-warning to call update_circuit_on_cmux() on a
non-attached circuit.
LocalWords: unstage src Untracked
Apparently some compilers like to eliminate memset() operations on
data that's about to go out-of-scope. I've gone with the safest
possible replacement, which might be a bit slow. I don't think this
is critical path in any way that will affect performance, but if it
is, we can work on that in 0.2.4.
Fixes bug 7352.
Instead of warning about low ports that are advertised, we should have
been warning about low ports that we're listening on. Bug 7285, fix
on 0.2.3.9-alpha.
That's not where I'd want to put a $, but apparently the other
foo/id/<identity> things allow it, as does an arguably valid
interpretation of control-spec.txt. So let's be consistent.
Fix for a piece of bug 7059.
This is part of what's needed to build without warnings on mingw64:
it was warning about the cast from void* to long that happened in
the places we were using test_{n,}eq on pointers.
The alternative here would have been to broaden tt_int_op to accept
a long long or an intptr_t, but that's less correct (since pointers
aren't integers), and would hurt the portability of tinytest a
little.
Fixes part of 7260.
We still want to build on compilers w/o c99 support, such as
(notoriously, shamefully) MSVC.
So I'm commenting out the designated initializers in
circuitmux_ewma.c. The alternative would have been to use some kind
of macros to use designated initializers only when they're
supported, but that's error-prone, and can lead to code having
different meanings under different compilers.
Bug 7286; fix on 0.2.4.4-alpha; spotted by Gisle Vanem.
If we completed the handshake for the v2 link protocol but wound up
negotiating the wong protocol version, we'd become so confused about
what part of the handshake we were in that we'd promptly die with an
assertion.
This is a fix for CVE-2012-2250; it's a bugfix on 0.2.3.6-alpha.
All servers running that version or later should really upgrade.
Bug and fix from "some guy from France." I tweaked his code slightly
to make it log the IP of the offending node, and to forward-port it to
0.2.4.
If we completed the handshake for the v2 link protocol but wound up
negotiating the wong protocol version, we'd become so confused about
what part of the handshake we were in that we'd promptly die with an
assertion.
This is a fix for CVE-2012-2250; it's a bugfix on 0.2.3.6-alpha.
All servers running that version or later should really upgrade.
Bug and fix from "some guy from France." I tweaked his code slightly
to make it log the IP of the offending node.
Clients now consider the ClientRejectInternalAddresses config option
when using a microdescriptor consensus stanza to decide whether
an exit relay would allow exiting to an internal address. Fixes
bug 7190; bugfix on 0.2.3.1-alpha.
Our implementation of parse_short_policy was screwed up: it would
ignore the last character of every short policy. Obviously, that's
broken.
This patch fixes the busted behavior, and adds a bunch of unit tests
to make sure the rest of that function is okay.
Fixes bug 7192; fix on 0.2.3.1-alpha.
Conflicts:
src/or/circuitbuild.c
There was a huge-looking conflict in circuitbuild.c, but the only
change that had been made to circuitbuild.c since I forked off the
split_circuitbuild branch was 17442560c4. So I took the
split_circuitbuild version of the conflicting part, and manually
re-applied the change from 17442560c44e8093f9a..
OpenSSL 1.0.0 added an implementation of TLS session tickets, a
"feature" that let session resumption occur without server-side state
by giving clients an encrypted "ticket" that the client could present
later to get the session going again with the same keys as before.
OpenSSL was giving the keys to decrypt these tickets the lifetime of
the SSL contexts, which would have been terrible for PFS if we had
long-lived SSL contexts. Fortunately, we don't. Still, it's pretty
bad. We should also drop these, since our use of the extension stands
out with our non-use of session cacheing.
Found by nextgens. Bugfix on all versions of Tor when built with
openssl 1.0.0 or later. Fixes bug 7139.
Failure to do so left us open to a remotely triggerable assertion
failure. Fixes CVE-2012-2249; bugfix on 0.2.3.6-alpha. Reported by
"some guy from France".
This patch is a forward-port to 0.2.4, to work with the new channel
logic.
Failure to do so left us open to a remotely triggerable assertion
failure. Fixes CVE-2012-2249; bugfix on 0.2.3.6-alpha. Reported by
"some guy from France".
Our convention is that we use the changelog to note release-to-release
changes; we don't need to add changelog entries for bugs that didn't
appear in any released version of Tor. (By convention, we sometimes
say "this bug does not appear in any released version of Tor" or words
to that effect in the commit message so that when Roger goes to make
sure the changelog is right, he knows not to expect a changelog entry
for that part.)
There are as many divergent implementations of sys/queue.h as there
are operating systems shipping it, it would seem. They have some code
in common, but have drifted apart, and have added other stuff named
differently. So I'm taking a relatively sane one, and hoping for the
best.
I'm taking OpenBSD's in particular because of the lack of external
dependencies, the presence of a CIRCLEQ (we could use one of those in
places), and the liberal licensing terms.
I'm naming the file tor_queue.h, since historically we've run into
trouble having headers with the same names as system headers (log.h,
for example.)
The rationale for treating these files differently is that we should
be checking upstream for changes as applicable, and merging changes
upstream as warranted.
Conflicts:
src/or/circuitbuild.c
The conflict was trivial, since no line of code actually changed in
both branches: There was a fmt_addr() that turned into fmt_addrport()
in bug7011, and a "if (!n_conn)" that turned into "if (!n_chan)" in
master.
They're typically redundant with the "Your computer is too slow"
messages. Fixes bug 7038; bugfix on 0.2.2.16-alpha.
(In retrospect, we should have fixed this bug back in ticket 1042.)
We used to never return an IPv6 address unless ClientUseIPv6 was
set. We should allow clients running with bridges use IPv6 OR ports
even without setting ClientUseIPv6. Configuring an IPv6 address in a
Bridge line should imply that.
Fixes th second part of #6757.
Look at the address family of the preferred OR port rather than the
node.ipv6_preferred flag since the logic has changed with new
ClientUseIPv6 config option.
Fixes ticket 6884.
Right-shifting negative values has implementation-defined behavior.
On all the platforms we work on right now, the behavior is to
sign-extend the input. That isn't what we wanted in
auth_type_val = (descriptor_cookie_tmp[16] >> 4) + 1;
Fix for 6861; bugfix on 0.2.1.5-alpha; reported pseudonymously.
The broken behavior didn't actually hurt anything, I think, since the
only way to get sign-extension to happen would be to have the top bit
of descriptor_cookie_tmp[16] set, which would make the value of
descriptor_cookie_tmp[16] >> 4 somewhere between 0b11111111 and
0b11111000 (that is, between -1 and -8). So auth_type_val would be
between -7 and 0. And the immediate next line does:
if (auth_type_val < 1 || auth_type_val > 2) {
So the incorrectly computed auth_type_val would be rejected as
invalid, just as a correctly computed auth_type_val would be.
Still, this stuff shouldn't sit around the codebase.
We were doing (1<<p) to generate a flag at position p, but we should
have been doing (U64_LITERAL(1)<<p).
Fixes bug 6861; bugfix on 0.2.0.3-alpha; reported pseudonymously.
We already had code on windows to fix our file sizes when we're
reading a file in text mode and its size doesn't match the size from
fstat. But that code was only enabled when _WIN32 was defined, and
Cygwin defines __CYGWIN__ instead.
Fixes bug 6844; bugfix on 0.1.2.7-alpha.
This would be undefined behavior if it happened. (It can't actually
happen as we're using round_to_power_of_2, since we would have to
be trying to allocate exabytes of data.)
While we're at it, fix the behavior of round_to_power_of_2(0),
and document the function better.
Fix for bug 6831.
Our flag voting code needs to handle unrecognized flags, so it stores
them in a 64-bit bitfield. But we never actually checked for too many
flags, so we were potentially doing stuff like U64_LITERAL(1)<<flagnum
with flagnum >= 64. That's undefined behavior.
Fix for bug 6833; bugfix on 0.2.0.1-alpha.
097 hasn't seen a new version since 2007; we can drop support too.
This lets us remove our built-in sha256 implementation, and some
checks for old bugs.
This reverts commit 4aff97cfc7.
We don't actually want to be changing the torrc.sample on stable or
near-stable stuff, since doing so makes pointless busywork for debian
users.
When I removed version_supports_begindir, I accidentally removed the
mechanism we had been using to make a directory cache self-test its
directory port. This caused bug 6815, which caused 6814 (both in
0.2.4.2-alpha).
To fix this bug, I'm replacing the "anonymized_connection" argument to
directory_initiate_command_* with an enumeration to say how indirectly
to connect to a directory server. (I don't want to reinstate the
"version_supports_begindir" argument as "begindir_ok" or anything --
these functions already take too many arguments.)
For safety, I made sure that passing 0 and 1 for 'indirection' gives
the same result as you would have gotten before -- just in case I
missed any 0s or 1s.
We already do this for libevent; let's do it for openssl too.
For now, I'm making it always a warn, since this has caused some
problems in the past. Later, we can see about making it less severe.
Add ClientUseIPv6 and ClientPreferIPv6ORPort configuration options.
Use "preferred OR port" for all entry nodes, not only for bridges.
Mark bridges with "prefer IPv6 OR port" if an IPv6 address is
configured in Bridge line and ClientPreferIPv6ORPort is set.
Mark relays with "prefer IPv6 OR port" if an IPv6 address is found in
descriptor and ClientPreferIPv6ORPort is set.
Filter "preferred OR port" through the ClientUseIPv6 config option. We
might want to move this test to where actual connection is being set
up once we have a fall back mechanism in place.
Have only non-servers pick an IPv6 address for the first hop: We
don't want relays to connect over IPv6 yet. (IPv6 has never been used
for second or third hops.)
Implements ticket 5535.
Define new new consensus method 14 adding "a" lines to vote and
consensus documents.
From proposal 186:
As with other data in the vote derived from the descriptor, the
consensus will include whichever set of "a" lines are given by the
most authorities who voted for the descriptor digest that will be
used for the router.
This patch implements this.
Allow one-hop directory fetching circuits the full "circuit build timeout"
period, rather than just half of it, before failing them and marking
the relay down. This fix should help reduce cases where clients declare
relays (or worse, bridges) unreachable because the TLS handshake takes
a few seconds to complete.
Fixes bug 6743 (one piece of bug 3443); bugfix on 0.2.2.2-alpha, where
we changed the timeout from a static 30 seconds.
We've had over two months to fix them, and didn't. Now we need
0.2.3.x stable. Yes, it would be cool to get this working in
0.2.3.x, but not at the expense of delaying every other feature that
_does_ work in 0.2.3.x. We can do a real fix in 0.2.4.
This is important, since otherwise an attacker can use timing info
to probe the internal network.
Also, add an option (ExtendAllowPrivateAddresses) so that
TestingTorNetwork won't break.
Fix for bug 6710; bugfix on all released versions of Tor.
Move extend_info_from_router() from circuitbuild.c to router.c and
make it static.
Add get_configured_bridge_by_orports_digest() and have
get_configured_bridge_by_routerinfo() and
node_is_a_configured_bridge() use it. We now consider all OR ports of
a bridge when looking for it.
Move node_get_*_orport to nodelist.c.
Fix a cut'n'paste error in header of nodelist.h.
Add node_assert_ok().
Add router_get_all_orports(). It's duplicating code from
node_get_all_orports(). Worth fixing at the cost of complicating the
API slightly?
Failure to do this would lead to double-free cases and similar,
especially when the exit's DNS was broken. See bug 6472 for full
details; this is a fix for 6472.
Anonymous patch from "cypherpunks" on trac.
Long ago, before we had cell queues, it was necessary to maybe call
connection_handle_write() from connectino_write_to_buf_impl() on OR
connections, so that we wouldn't get into a loop of reading infinite
amounts of data and queueing it all on an outbuf before bothering to
write any data.
If that doesn't sounds like what our code does now, you're right:
right now, we won't stick more than OR_CONN_HIGHWATER bytes of cells
on an outbuf, and we won't suck more than CELL_QUEUE_HIGHWATER_SIZE
cells off any edge connection. So, there's no more call for that
code.
Removing this code will simplify our data flow, and that should be
something we can all get behind.
The warning fixes are:
- Only define issetugid if it's missing.
- Explicitly ignore the return value of writev.
- Explicitly cast the retval of readlink() to int.
The 64-bit problems are related to just storing a size_t in an int. Not cool! Use a size_t instead.
Fix for bug 6379. Bugfix on 0.2.0.20-rc, which introduced openbsd-malloc.
Extend cells aren't allowed to have a stream_id, but we were only
blocking them when they had a stream_id that corresponded to a
connection. As far as I can tell, this change is harmless: it will
make some kinds of broken clients not work any more, but afaik nobody
actually make a client that was broken in that way.
Found while hunting for other places where we made the same mistake
as in 6271.
Bugfix on d7f50337c1 back from May 2003, which introduced
telescoping circuit construction into 0.0.2pre8.
Thanks to the changes we started making with SocksPort and friends
in 0.2.3.3-alpha, any of our code that did "if (options->Sockport)"
became wrong, since "SocksPort 0" would make that test true whereas
using the default SocksPort value would make it false. (We didn't
actually do "if (options->SockPort)" but we did have tests for
TransPort. When we moved DirPort, ORPort, and ControlPort over to
the same system in 0.2.3.9-alpha, the problem got worse, since our
code is littered with checks for DirPort and ORPort as booleans.
This code renames the current linelist-based FooPort options to
FooPort_lines, and adds new FooPort_set options which get set at
parse-and-validate time on the or_options_t. FooPort_set is true
iff we will actually try to open a listener of the given type. (I
renamed the FooPort options rather than leave them alone so that
every previous user of a FooPort would need to get inspected, and so
that any new code that forgetfully uses FooPort will need fail to
compile.)
Fix for bug 6507.
The old approach, because of its "tmp >= rand_bw &&
!i_has_been_chosen" check, would run through the second part of the
loop slightly slower than the first part. Now, we remove
i_has_been_chosen, and instead set rand_bw = UINT64_MAX, so that
every instance of the loop will do exactly the same amount of work
regardless of the initial value of rand_bw.
Fix for bug 6538.
This should make our preferred solution to #6538 easier to
implement, avoid a bunch of potential nastiness with excessive
int-vs-double math, and generally make the code there a little less
scary.
"But wait!" you say. "Is it really safe to do this? Won't the
results come out differently?"
Yes, but not much. We now round every weighted bandwidth to the
nearest byte before computing on it. This will make every node that
had a fractional part of its weighted bandwidth before either
slighty more likely or slightly less likely. Further, the rand_bw
value was only ever set with integer precision, so it can't
accurately sample routers with tiny fractional bandwidth values
anyway. Finally, doing repeated double-vs-uint64 comparisons is
just plain sad; it will involve an implicit cast to double, which is
never a fun thing.
I don't personally agree that this is likely to be easy to exploit,
and some initial experimention I've done suggests that cache-miss
times are just plain too fast to get useful info out of when they're
mixed up with the rest of Tor's timing noise. Nevertheless, I'm
leaving Robert's initial changelog entry in the git history so that he
can be the voice of reason if I'm wrong. :)
$ make V=1 # will temporarily disable them
otherwise you see:
CC foo.c
rather than the giant long bulid line.
This makes it significantly easier to spot compiler warnings etc.
Additionally, make them conditional, so we won't error on automake <
1.11
(commits squashed by nickm.)
In 0.2.3.18-rc, we started warning on this case while building a
list of missing microdescriptor digests. That turned out to spam
the logs; instead let's warn at parse time.
Partial fix for bug 6404.
The spec requires that every router in a microdesc consensus have an
m line; we weren't obeying that spec.
This creates a new consensus method (13) to allow voting to continue
to work right. Partial fix for bug 6404; fix on 0.2.2.6-alpha.
This is based on a pair of patches from A. Costa. I couldn't apply
those directly, since they changed the generated *roff files, not
the asciidoc source.
Fixes Tor bug 6500 and Debian bug 683359.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
This avoids a possible crash bug in flush_from_first_active_circuit.
Fixes bug 6341; bugfix on 0.2.2.7-alpha.
Bug reported and fixed by a pseudonymous user on IRC.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
The SMARTLIST_FOREACH macro is more convenient than BEGIN/END when
you have a nice short loop body, but using it for long bodies makes
your preprocessor tell the compiler that all the code is on the same
line. That causes grief, since compiler warnings and debugger lines
will all refer to that one line.
So, here's a new style rule: SMARTLIST_FOREACH blocks need to be
short.
- Add a changes/ file.
- Make it compile under --enable-gcc-warnings.
- Update the file-level documentation of src/or/transports.c.
- Only update descriptor if at least a managed proxy was configured.
- Add our external IP address to the extra-info descriptor instead of 0.0.0.0.
This could result in bizarre window values. Report and patch
contributed pseudymously. Fixes part of bug 6271. This bug was
introduced before the first Tor release, in svn commit r152.
(bug 6271, part a.)
This reverts commit c32ec9c425.
It turns out the two sides of the circuit don't actually stay in sync,
so it is perfectly normal for the circuit window on the exit relay to
grow to 2000+. We should fix that bug and then reconsider this patch.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
With glibc 2.15 and clang 3.0, I get warnings from where we use the
strcpsn implementation in the header as strcspn(string, "="). This
is apparently because clang sees that part of the strcspn macro
expands to "="[2], and doesn't realize that that part of the macro
is only evaluated when "="[1] != 0.
The functions parse_{s,c}method_line() were using
tor_addr_port_lookup() which is capable of doing DNS lookups. DNS
lookups should not be necessary when parsing {C,S}METHOD lines.
The code that detected the source of a remapped address checked that
an address mapping's source was a given rewrite rule if addr_orig had
no .exit, and addr did have a .exit after processing that rule. But
addr_orig was formatted for logging: it was not the original address
at all, but rather was the address escaped for logging and possibly
replaced with "[scrubbed]".
This new logic will correctly set ADDRMAPSRC_NONE in the case when the
address starts life as a .exit address, so that AllowDotExit can work
again.
Fixes bug 6211; bugfix on 0.2.3.17-beta
It turns out this can happen. Even though there is no reason for
connections to be marked but reading, we leave them reading anyway,
so warning here is unwarranted. Let's turn that back on once we do
something sensible and disable reading when we mark. Bugfix for
6203 on Tor 0.2.3.17-beta.
Thanks to cypherpunks for pointing out the general stupidity of the
original code here.
On some platforms, the linker is perfectly happy to produce binaries
that won't run if you give it the wrong set of flags. So when not
cross-compiling, try to link-and-run a little test program, rather
than just linking it.
Possible fix for 6173.
Previously, a directory would check the latest NS consensus for
having the signatures the client wanted, and use that consensus's
valid_until time to set the HTTP lifetime. With this patch, the
directory looks at NS consensus or the microdesc consensus,
depending on what the client asked for.
The warning message of validate_pluggable_transports_config() is
superseded by the changes in the warning message of
connection_or_connect() when the proxy credentials can't be found.
This is a feature removal: we no longer fake any ciphersuite other
than the not-really-standard SSL_RSA_FIPS_WITH_3DES_EDE_CBC_SHA
(0xfeff). This change will let servers rely on our actually
supporting what we claim to support, and thereby let Tor migrate to
better TLS ciphersuites.
As a drawback, Tor instances that use old openssl versions and
openssl builds with ciphers disabled will no longer give the
"firefox" cipher list.
Manually removed range 0.116.0.0 to 0.119.255.255 which Maxmind says is
assigned to AT. This is very likely a bug in their database, because
0.0.0.0/8 is a reserved range.
From what I can tell, this configuration is usually a mistake, and
leads people to think that all their traffic is getting proxied when
in fact practically none of it is. Resolves the issue behind "bug"
4663.
