This module doesn't actually need to mock the libevent mainloop at
all: it can just use the regular mainloop that the test environment
sets up.
Part of ticket 23750.
This change makes cpuworker and test_workqueue no longer need to
include event2/event.h. Now workqueue.c needs to include it, but
that is at least somewhat logical here.
There's now no difference in these tests w.r.t. the C or Rust: both
fail miserably (well, Rust fails with nice descriptive errors, and C
gives you a traceback, because, well, C).
The DoS potential is slightly higher in C now due to some differences to the
Rust code, see the C_RUST_DIFFERS tags in src/rust/protover/tests/protover.rs.
Also, the comment about "failing at the splitting stage" in Rust wasn't true,
since when we split, we ignore empty chunks (e.g. "1--1" parses into
"(1,None),(None,1)" and "None" can't be parsed into an integer).
Finally, the comment about "Rust seems to experience an internal error" is only
true in debug mode, where u32s are bounds-checked at runtime. In release mode,
code expressing the equivalent of this test will error with
`Err(ProtoverError::Unparseable)` because 4294967295 is too large.
Previously, if "Link=1-5" was supported, and you asked protover_all_supported()
(or protover::all_supported() in Rust) if it supported "Link=3-999", the C
version would return "Link=3-999" and the Rust would return "Link=6-999". These
both behave the same now, i.e. both return "Link=6-999".
There's now no difference in these tests w.r.t. the C or Rust: both
fail miserably (well, Rust fails with nice descriptive errors, and C
gives you a traceback, because, well, C).
The DoS potential is slightly higher in C now due to some differences to the
Rust code, see the C_RUST_DIFFERS tags in src/rust/protover/tests/protover.rs.
Also, the comment about "failing at the splitting stage" in Rust wasn't true,
since when we split, we ignore empty chunks (e.g. "1--1" parses into
"(1,None),(None,1)" and "None" can't be parsed into an integer).
Finally, the comment about "Rust seems to experience an internal error" is only
true in debug mode, where u32s are bounds-checked at runtime. In release mode,
code expressing the equivalent of this test will error with
`Err(ProtoverError::Unparseable)` because 4294967295 is too large.
Previously, if "Link=1-5" was supported, and you asked protover_all_supported()
(or protover::all_supported() in Rust) if it supported "Link=3-999", the C
version would return "Link=3-999" and the Rust would return "Link=6-999". These
both behave the same now, i.e. both return "Link=6-999".
These tests handle incoming and outgoing cells on a three-hop
circuit, and make sure that the crypto works end-to-end. They don't
yet test spec conformance, leaky-pipe, or various error cases.
Additionally, this change extracts the functions that created and
freed these elements.
These structures had common "forward&reverse stream&digest"
elements, but they were initialized and freed through cpath objects,
and different parts of the code depended on them. Now all that code
is extacted, and kept in relay_crypto.c
This should help us improve modularity, and should also make it
easier for people to experiment with other relay crypto strategies
down the road.
This commit is pure function movement.
This should avoid most intermittent test failures on developer and CI machines,
but there could (and probably should) be a more elegant solution.
Also, this test was testing that the IP was created and its expiration time was
set to a time greater than or equal to `now+INTRO_POINT_LIFETIME_MIN_SECONDS+5`:
/* Time to expire MUST also be in that range. We add 5 seconds because
* there could be a gap between setting now and the time taken in
* service_intro_point_new. On ARM, it can be surprisingly slow... */
tt_u64_op(ip->time_to_expire, OP_GE,
now + INTRO_POINT_LIFETIME_MIN_SECONDS + 5);
However, this appears to be a typo, since, according to the comment above it,
adding five seconds was done because the IP creation can be slow on some
systems. But the five seconds is added to the *minimum* time we're comparing
against, and so it actually functions to make this test *more* likely to fail on
slower systems. (It should either subtract five seconds, or instead add it to
time_to_expire.)
* FIXES#25450: https://bugs.torproject.org/25450
These were meant to demonstrate old behavior, or old rust behavior.
One of them _should_ work in Rust, but won't because of
implementation details. We'll fix that up later.
The C code and the rust code had different separate integer overflow
bugs here. That suggests that we're better off just forbidding this
pathological case.
Also, add tests for expected behavior on receiving a bad protocol
list in a consensus.
Fixes another part of 25249.
I've refactored these to be a separate function, to avoid tricky
merge conflicts.
Some of these are disabled with "XXXX" comments; they should get
fixed moving forward.
* ADD includes for "torint.h" and "container.h" to crypto_digest.h.
* ADD includes for "crypto_digest.h" to a couple places in which
crypto_digest_t was then missing.
* FIXES part of #24658: https://bugs.torproject.org/24658#comment:30
Folks have found two in the past week or so; we may as well fix the
others.
Found with:
\#!/usr/bin/python3
import re
def findMulti(fname):
includes = set()
with open(fname) as f:
for line in f:
m = re.match(r'^\s*#\s*include\s+["<](\S+)[>"]', line)
if m:
inc = m.group(1)
if inc in includes:
print("{}: {}".format(fname, inc))
includes.add(m.group(1))
import sys
for fname in sys.argv[1:]:
findMulti(fname)
Since 0.2.4, tor uses EWMA circuit policy to prioritize. The previous
algorithm, round-robin, hasn't been used since then but was still used as a
fallback.
Now that EWMA is mandatory, remove that code entirely and enforce a cmux
policy to be set.
This is part of a circuitmux cleanup to improve performance and reduce
complexity in the code. We'll be able to address future optimization with this
work.
Closes#25268
Signed-off-by: David Goulet <dgoulet@torproject.org>
To achieve this, a default value for the CircuitPriorityHalflife option was
needed. We still look in the options and then the consensus but in case no
value can be found, the default CircuitPriorityHalflifeMsec=30000 is used. It
it the value we've been using since 0.2.4.4-alpha.
This means that EWMA, our only policy, can not be disabled anymore fallbacking
to the round robin algorithm. Unneeded code to control that is removed in this
commit.
Part of #25268
Signed-off-by: David Goulet <dgoulet@torproject.org>
On slow system, 1 msec between one read and the other was too tight. For
instance, it failed on armel with a 4msec gap:
https://buildd.debian.org/status/package.php?p=tor&suite=experimental
Increase to 10 msec for now to address slow system. It is important that we
keep this OP_LE test in so we make sure the msec/usec/nsec read aren't
desynchronized by huge gaps. We'll adjust again if we ever encounter a system
that goes slower than 10 msec between calls.
Fixes#25113
Signed-off-by: David Goulet <dgoulet@torproject.org>
Since we're making it so that unstable zstd apis can be disabled,
we need to test them. I do this by adding a variant setup/cleanup
function for the tests, and teaching it about a fake compression
method called "x-zstd:nostatic".
If the cache is using 20% of our maximum allowed memory, clean 10% of it. Same
behavior as the HS descriptor cache.
Closes#25122
Signed-off-by: David Goulet <dgoulet@torproject.org>
The current code flow makes it that we can release a channel in a PENDING
state but not in the pending list. This happens while the channel is being
processed in the scheduler loop.
Fixes#25125
Signed-off-by: David Goulet <dgoulet@torproject.org>
This tests many cases of the KIST scheduler with the pending list state by
calling entry point in the scheduler while channels are scheduled or not.
Also, it adds a test for the bug #24700.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 0.3.2.1-alpha, we've added notify_networkstatus_changed() in order to have
a way to notify other subsystems that the consensus just changed. The old and
new consensus are passed to it.
Before this patch, this was done _before_ the new consensus was set globally
(thus NOT accessible by getting the latest consensus). The scheduler
notification was assuming that it was set and select_scheduler() is looking at
the latest consensus to get the parameters it might needs. This was very wrong
because at that point it is still the old consensus set globally.
This commit changes the notify_networkstatus_changed() to be the "before"
function and adds an "after" notification from which the scheduler subsystem
is notified.
Fixes#24975
When we stopped looking at the "protocols" variable directly, we
broke the hs_service/build_update_descriptors test, since it didn't
actually update any of the flags.
The fix here is to call summarize_protover_flags() from that test,
and to expose summarize_protover_flags() as "STATIC" from
routerparse.c.
Since helper_create_introduce1_cell() checks "cell" for nullness,
scan-build is concerned that test_introduce1_validation()
dereferences it without checking it. So, add a check.
Not backporting, since this is spurious, _and_ tests-only.
These are all about local variables shadowing global
functions. That isn't normally a problem, but at least one
compiler we care about seems to treat this as a case of -Wshadow
violation, so let's fix it.
Fixes bug 24634; bugfix on 0.3.2.1-alpha.
Using tt_assert in these helpers was implying to scan-build that our
'new' functions might be returning NULL, which in turn would make it
warn about null-pointer use.
We've been seeing problems with destroy cells queues taking up a
huge amount of RAM. We can mitigate this, since while a full packed
destroy cell takes 514 bytes, we only need 5 bytes to remember a
circuit ID and a reason.
Fixes bug 24666. Bugfix on 0.2.5.1-alpha, when destroy cell queues
were introduced.
Using absolute_msec requires a 64-bit division operation every time
we calculate it, which gets expensive on 32-bit architectures.
Instead, just use the lazy "monotime_coarse_get()" operation, and
don't convert to milliseconds until we absolutely must.
In this case, it seemed fine to use a full monotime_coarse_t rather
than a truncated "stamp" as we did to solve this problem for the
timerstamps in buf_t and packed_cell_t: There are vastly more cells
and buffer chunks than there are channels, and using 16 bytes per
channel in the worst case is not a big deal.
There are still more millisecond operations here than strictly
necessary; let's see any divisions show up in profiles.
Retry directory downloads when we get our first bridge descriptor
during bootstrap or while reconnecting to the network. Keep retrying
every time we get a bridge descriptor, until we have a reachable bridge.
Stop delaying bridge descriptor fetches when we have cached bridge
descriptors. Instead, only delay bridge descriptor fetches when we
have at least one reachable bridge.
Fixes bug 24367; bugfix on 0.2.0.3-alpha.
networkstatus_consensus_has_ipv6() tells us whether the consensus method of
our current consensus supports IPv6 ORPorts in the consensus.
Part of #23827.
