Tor checks that the flag matches the configured onion service anonymity.
Tor refuses to create unflagged onion service using ADD_ONION, if they
would be non-anonymous. The error is:
512 Tor is in non-anonymous onion mode
Similarly, if the NonAnonymous flag is present, and Tor has the default
anonymous onion config:
512 Tor is in anonymous onion mode
Parse the value to UseEntryNodes_option, then set UseEntryNodes before
validating options.
This way, Authorities, Tor2web, and Single Onion Services don't write
spurious "UseEntryNodes 0" lines to their configs. Document the fact that
these tor configurations ignore UseEntryNodes in the manual page.
Also reorder options validation so we modify UseEntryNodes first, then
check its value against EntryNodes.
And silence a warning about disabled UseEntryNodes for hidden services
when we're actually in non-anonymous single onion service mode.
We log this message every time we validate tor's options.
There's no need to log a duplicate in main() as well.
(It is impossible to run main() without validating our options.)
The changes in #19973 fixed ReachableAddresses being applied
too broadly, but they also broke Tor2web (somewhat unintentional)
compatibility with ReachableAddresses.
This patch restores that functionality, which makes intro and
rend point selection is consistent between Tor2web and Single Onion
Services.
Add experimental OnionServiceSingleHopMode and
OnionServiceNonAnonymousMode options. When both are set to 1, every
hidden service on a tor instance becomes a non-anonymous Single Onion
Service. Single Onions make one-hop (direct) connections to their
introduction and renzedvous points. One-hop circuits make Single Onion
servers easily locatable, but clients remain location-anonymous.
This is compatible with the existing hidden service implementation, and
works on the current tor network without any changes to older relays or
clients.
Implements proposal #260, completes ticket #17178. Patch by teor & asn.
squash! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! Implement Prop #260: Single Onion Services
Redesign single onion service poisoning.
When in OnionServiceSingleHopMode, each hidden service key is poisoned
(marked as non-anonymous) on creation by creating a poison file in the
hidden service directory.
Existing keys are considered non-anonymous if this file exists, and
anonymous if it does not.
Tor refuses to launch in OnionServiceSingleHopMode if any existing keys
are anonymous. Similarly, it refuses to launch in anonymous client mode
if any existing keys are non-anonymous.
Rewrite the unit tests to match and be more comprehensive.
Adds a bonus unit test for rend_service_load_all_keys().
(We check consensus method when deciding whether to assume a node is
valid. No need to check the consensus method for Running, since
we will never see a method before 13.)
Closes ticket 20001
g
The other test vectors are pretty complete, and get full coverage, I
believe.
This one test vector accounted for half the time spent in
test-slow. "Now that's slow!"
We have a mock for our RSA key generation function, so we now wire
it to pk_generate(). This covers all the cases that were not using
pk_generate() before -- all ~93 of them.
Previously, you needed to store the previous log severity in a local
variable, and it wasn't clear if you were allowed to call these
functions more than once.
The functions it warns about are:
assert, memcmp, strcat, strcpy, sprintf, malloc, free, realloc,
strdup, strndup, calloc.
Also, fix a few lingering instances of these in the code. Use other
conventions to indicate _intended_ use of assert and
malloc/realloc/etc.
We should consider them bugs. If they are happening intentionally,
we should use the log_test_helpers code to capture and suppress
them. But having them off-by-default has potential to cause
programming errors.
Previously setup_capture_of_logs would prevent log messages from
going to the console entirely. That's a problem, since sometimes
log messages are bugs! Now setup_capture_of_logs() acts sensibly.
If you really do need to keep a message from going to the console
entirely, there is setup_full_capture_of_logs(). But only use that
if you're prepared to make sure that there are no extraneous
messages generated at all.
Users can't run an anonymous client and non-anonymous single
onion service at the same time. We need to know whether we have
any client ports or sockets open to do this check.
When determining whether a client port (SOCKS, Trans, NATD, DNS)
is set, count unix sockets when counting client listeners. This
has no user-visible behaviour change, because these options are
set once and never read in the current tor codebase.
Don't count sockets when setting ControlPort_set, that's what
ControlSocket is for. (This will be reviewed in #19665.)
Don't count sockets when counting server listeners, because the code
that uses these options expects to count externally-visible ports.
(And it would change the behaviour of Tor.)
Copying the integer 42 in a char buffer has a different representation
depending on the endianess of the system thus that unit test was failing on
big endian system.
This commit introduces a python script, like the one we have for SRV, that
computes a COMMIT/REVEAL from scratch so we can use it as a test vector for
our encoding unit tests.
With this, we use a random value of bytes instead of a number fixing the
endianess issue and making the whole test case more solid with an external
tool that builds the COMMIT and REVEAL according to the spec.
Fixes#19977
Signed-off-by: David Goulet <dgoulet@torproject.org>
Check NoOnionTraffic before attaching a stream.
NoOnionTraffic refuses connections to all onion hostnames,
but permits non-onion hostnames and IP addresses.
Check NoDNSRequest, NoIPv4Traffic, and NoIPv6Traffic before
attaching a stream.
NoDNSRequest refuses connections to all non-onion hostnames,
but permits IP addresses.
NoIPv4Traffic refuses connections to IPv4 addresses, but resolves
hostnames.
NoIPv6Traffic refuses connections to IPv6 addresses, but resolves
hostnames.
Combined, they refuse all non-onion hostnames and IP addresses.
OnionTrafficOnly is equivalent to NoDNSRequest, NoIPv4Traffic,
and NoIPv6Traffic.
Add unit tests for parsing and checking option validity.
Add documentation for each flag to the man page.
Add changes file for all of #18693.
Parsing only: the flags do not change client behaviour (yet!)
Rely on onion_populate_cpath to check that we're only using
TAP for the rare hidden service cases.
Check and log if handshakes only support TAP when they should support
ntor.
When a client connects to an intro point not in the client's consensus,
or a hidden service connects to a rend point not in the hidden service's
consensus, we are stuck with using TAP, because there is no ntor link
specifier.
This bug had existed since 0.2.4.7-alpha, but now that we have
FallbackDirs by default, it actually matters.
Fixes bug 19947; bugfix on 0.2.4.7-alpha or maybe 0.2.8.1-alpha.
Rubiate wrote the patch; teor wrote the changes file.
Longer and more explicit log message so we don't confuse users with behind NAT with working configurations and state that public IP addresses only should be provided with "Address", won't work with internal addresses.
OpenBSD removes this function, and now that Tor requires Libevent 2,
we should also support the OpenBSD Libevent 2.
Fixes bug 19904; bugfix on 0.2.5.4-alpha.
These functions were there so that we could abstract the differences
between evbuffer and buf_t. But with the bufferevent removal, this
no longer serves a purpose.
To maintain precision, to get nanoseconds, we were multiplying our
tick count by a billion, then dividing by ticks-per-second. But
that apparently isn't such a great idea, since ticks-per-second is
sometimes a billion on its own, so our intermediate result was
giving us attoseconds.
When you're counting in attoseconds, you can only fit about 9
seconds into an int64_t, which is not so great for our purposes.
Instead, we now simplify the 1000000000/1000000000 fraction before
we start messing with nanoseconds. This has potential to mess us
up if some future MS version declares that performance counters will
use 1,000,000,007 units per second, but let's burn that bridge when
we come to it.
* Raise limit: 16k isn't all that high.
* Don't log when limit exceded; log later on.
* Say "over" when we log more than we say we log.
* Add target version to changes file
This code uses QueryPerformanceCounter() [**] on Windows,
mach_absolute_time() on OSX, clock_gettime() where available, and
gettimeofday() [*] elsewhere.
Timer types are stored in an opaque OS-specific format; the only
supported operation is to compute the difference between two timers.
[*] As you know, gettimeofday() isn't monotonic, so we include
a simple ratchet function to ensure that it only moves forward.
[**] As you may not know, QueryPerformanceCounter() isn't actually
always as monotonic as you might like it to be, so we ratchet that
one too.
We also include a "coarse monotonic timer" for cases where we don't
actually need high-resolution time. This is GetTickCount{,64}() on
Windows, clock_gettime(CLOCK_MONOTONIC_COARSE) on Linux, and falls
back to regular monotonic time elsewhere.
If we know a node's version, and it can't do ntor, consider it not running.
If we have a node's descriptor, and it doesn't have a valid ntor key,
consider it not running.
Refactor these checks so they're consistent between authorities and clients.
Before, they checked for version 0.2.4.18-rc or later, but this
would not catch relays without version lines, or buggy or malicious
relays missing an ntor key.
If we did not find a non-private IPaddress by iterating over interfaces,
we would try to get one via
get_interface_address6_via_udp_socket_hack(). This opens a datagram
socket with IPPROTO_UDP. Previously all our datagram sockets (via
libevent) used IPPROTO_IP, so we did not have that in the sandboxing
whitelist. Add (SOCK_DGRAM, IPPROTO_UDP) sockets to the sandboxing
whitelist. Fixes bug 19660.
This fixes#19608, allowing IPv6-only clients to use
microdescriptors, while preserving the ability of bridge clients
to have some IPv4 bridges and some IPv6 bridges.
Fix on c281c036 in 0.2.8.2-alpha.
The test was checking for EISDIR which is a Linux-ism making other OSes
unhappy. Instead of checking for a negative specific errno value, just make
sure it's negative indicating an error. We don't need more for this test.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We introduded a shadowed variable, thereby causing a log message to
be wrong. Fixes 19578. I believe the bug was introduced by
54d7d31cba in 0.2.2.29-beta.
I grepped and hand-inspected the "it's" instances, to see if any
were supposed to be possessive. While doing that, I found a
"the the", so I grepped to see if there were any more.
Keep the base16 representation of the RSA identity digest in the commit object
so we can use it without using hex_str() or dynamically encoding it everytime
we need it. It's used extensively in the logs for instance.
Fixes#19561
Signed-off-by: David Goulet <dgoulet@torproject.org>
Encoded commit has an extra byte at the end for the NUL terminated byte and
the test was overrunning the payload buffer by one byte.
Found by Coverity issue 1362984.
Fixes#19567
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch also updates a comment in the same function for accuracy.
Found by Coverity issue 1362985. Partily fixes#19567.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Only some very ancient distributions don't ship with Libevent 2 anymore,
even the oldest supported Ubuntu LTS version has it. This allows us to
get rid of a lot of compat code.
Our sandboxing code would not allow us to write to stats/hidserv-stats,
causing tor to abort while trying to write stats. This was previously
masked by bug#19556.
When sandboxing is enabled, we could not write any stats to disk.
check_or_create_data_subdir("stats"), which prepares the private stats
directory, calls check_private_dir(), which also opens and not just stats() the
directory. Therefore, we need to also allow open() for the stats dir in our
sandboxing setup.
The test_state_update() test would fail if you run it between 23:30 and
00:00UTC in the following line because n_protocol_runs was 2:
tt_u64_op(state->n_protocol_runs, ==, 1);
The problem is that when you launch the test at 23:30UTC (reveal phase),
sr_state_update() gets called from sr_state_init() and it will prepare
the state for the voting round at 00:00UTC (commit phase). Since we
transition from reveal to commit phase, this would trigger a phase
transition and increment the n_protocol_runs counter.
The solution is to initialize the n_protocol_runs to 0 explicitly in the
beginning of the test, as we do for n_reveal_rounds, n_commit_rounds etc.
The *get* state query functions for the SRVs now only return const pointers
and the DEL action needs to be used to delete the SRVs from the state.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch makes us retain the intermediate list of K=V entries for
the duration of computing our vote, and lets us use that list with
a new function in order to look up parameters before the consensus
is published.
We can't actually use this function yet because of #19011: our
existing code to do this doesn't actually work, and we'll need a new
consensus method to start using it.
Closes ticket #19012.
Commit and reveal length macro changed from int to unsigned long int
(size_t) because of the sizeof().
Signed-off-by: David Goulet <dgoulet@torproject.org>
See ticket #19132 for the clang/llvm warning.
Since voting_schedule is a global static struct, it will be initialized
to zero even without explicitly initializing it with {0}.
This is what the C spec says:
If an object that has automatic storage duration is not initialized
explicitly, its value is indeterminate. If an object that has static
storage duration is not initialized explicitly, then:
— if it has pointer type, it is initialized to a null pointer;
— if it has arithmetic type, it is initialized to (positive or unsigned) zero;
— if it is an aggregate, every member is initialized (recursively) according to these rules;
— if it is a union, the first named member is initialized (recursively) according to these rules.
Code has been changed so every RSA fingerprint for a commit in our state is
validated before being used. This fixes the unit tests by mocking one of the
key function and updating the hardcoded state string.
Also, fix a time parsing overflow on platforms with 32bit time_t
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
We assert on it using the ASSERT_COMMIT_VALID() macro in critical places
where we use them expecting a commit to be valid.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The prop250 code used the RSA identity key fingerprint to index commit in a
digestmap instead of using the digest.
To behavior change except the fact that we are actually using digestmap
correctly.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit makes it that tor now uses the shared random protocol by
initializing the subsystem.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
One of the last piece that parses the votes and consensus in order to update
our state and make decision for the SR values.
We need to inform the SR subsystem when we set the current consensus because
this can be called when loaded from file or downloaded from other authorities
or computed.
The voting schedule is used for the SR timings since we are bound to the
voting system.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
This commit adds the commit(s) line in the vote as well as the SR values. It
also has the mechanism to add the majority SRVs in the consensus.
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Signed-off-by: David Goulet <dgoulet@torproject.org>
This adds the logic of commit and SR values generation. Furthermore, the
concept of a protocol run is added that is commit is generated at the right
time as well as SR values which are also rotated before a new protocol run.
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Signed-off-by: David Goulet <dgoulet@torproject.org>
From 0.2.7.2-alpha onwards, Exits would reject all the IP addresses
they knew about in their exit policy. But this may have disclosed
addresses that were otherwise unlisted.
Now, only advertised addresses are rejected by default by
ExitPolicyRejectPrivate. All known addresses are only rejected when
ExitPolicyRejectLocalInterfaces is explicitly set to 1.
Validate that tv_usec inputs to tv_udiff and tv_mdiff are in range.
Do internal calculations in tv_udiff and tv_mdiff in 64-bit,
which makes the function less prone to integer overflow,
particularly on platforms where long and time_t are 32-bit,
but tv_sec is 64-bit, like some BSD configurations.
Check every addition and subtraction that could overflow.
If we manually remove fallbacks in C by adding '/*' and '*/' on separate
lines, stem still parses them as being present, because it only looks at
the start of a line.
Add a comment to this effect in the generated source code.
Remove a fallback that changed its fingerprint after it was listed
This happened after to a software update:
https://lists.torproject.org/pipermail/tor-relays/2016-June/009473.html
Remove a fallback that changed IPv4 address
Remove two fallbacks that were slow to deliver consensuses,
we can't guarantee they'll be fast in future.
Blacklist all these fallbacks until operators confirm they're stable.
This commit introduces two new files with their header.
"shared_random.c" contains basic functions to initialize the state and allow
commit decoding for the disk state to be able to parse them from disk.
"shared_random_state.c" contains everything that has to do with the state
for both our memory and disk. Lots of helper functions as well as a
mechanism to query the state in a synchronized way.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Make sure to memset(0) the destination buffer so we don't leave any
uninitialized data.
Fixes#19462
Signed-off-by: David Goulet <dgoulet@torproject.org>
This hack provides a way to make sure we can see coverage from
test-switch-id. If you set OVERRIDE_GCDA_PERMISSIONS_HACK, we
temporarily make the .gcda files mode 0666 before we run the
test scripts, and then we set them to 0644 again afterwards.
That's necessary because the test_switch_id.sh script does a
setuid() to 'nobody' part way through, and drops the ability to
change its mind back.
Slow system can sometime take more than 10 seconds to reach the test
callsite resulting in the unit test failing when using time in the future or
in the past.
Fixes#19465
Signed-off-by: David Goulet <dgoulet@torproject.org>
base16_decodes() now returns the number of decoded bytes. It's interface
changes from returning a "int" to a "ssize_t". Every callsite now checks the
returned value.
Fixes#14013
Signed-off-by: David Goulet <dgoulet@torproject.org>
