When we tried to use the deprecated non-threadsafe evdns
interfaces in Libevent 2 without using the also-deprecated
event_init() interface, Libevent 2 would sensibly crash, since it
has no guess where to find the Libevent library.
Here we use the evdns_base_*() functions instead if they're
present, and fake them if they aren't.
This is a possible fix for bug 1023, where if we vote (or make a v2
consensus networkstatus) right after we come online, we can call
rep_hist_note_router_unreachable() on every router we haven't connected
to yet, and thereby make all their uptime values reset.
This seems to be happening to me a lot on a garbage DSL line.
We may need to come up with 2 threshholds: a high short onehop
count and a lower longer count.
Don't count one-hop circuits when we're estimating how long it
takes circuits to build on average. Otherwise we'll set our circuit
build timeout lower than we should. Bugfix on 0.2.2.2-alpha.
Directory authorities now reject Tor relays with versions less than
0.1.2.14. This step cuts out four relays from the current network,
none of which are very big.
This shouldn't be necessary, but apparently the Android cross-compiler
doesn't respect -I as well as it should. (-I is supposed to add to the
*front* of the search path. Android's gcc wrapper apparently likes to add to
the end. This is broken, but we need to work around it.)
- Avoid memmoving 0 bytes which might lead to compiler warnings.
- Don't require relays to be entry node AND bridge at the same to time to
record clients.
- Fix a memory leak when writing dirreq-stats.
- Don't say in the stats files that measurement intervals are twice as long
as they really are.
- Reduce minimum observation time for requests to 12 hours, or we might
never record usage.
- Clear exit stats correctly after writing them, or we accumulate old stats
over time.
- Reset interval start for buffer stats, too.
The big change is to add a function to display the current SSL handshake
state, and to log it everywhere reasonable. (A failure in
SSL23_ST_CR_SRVR_HELLO_A is different from one in
SSL3_ST_CR_SESSION_TICKET_A.)
This patch also adds a new log domain for OR handshaking, so you can pull out
all the handshake log messages without having to run at debug for everything.
For example, you'd just say "log notice-err [handshake]debug-err file
tor.log".
This was the only log notice that happened during other
tor invocations, like --verify-config and --list-fingerprint.
Plus, now we think it works, so no need to hear about it.
"Tinytest" is a minimalist C unit testing framework I wrote for
Libevent. It supports some generally useful features, like being able
to run separate unit tests in their own processes.
I tried to do the refactoring to change test.c as little as possible.
Thus, we mostly don't call the tinytest macros directly. Instead, the
test.h header is now a wrapper on tinytest.h to make our existing
test_foo() macros work.
The next step(s) here will be:
- To break test.c into separate files, each with its own test group.
- To look into which things we can test
- To refactor the more fiddly tests to use the tinytest macros
directly and/or run forked.
- To see about writing unit tests for things we couldn't previously
test without forking.
If the networkstatus consensus tells us that we should use a
negative circuit package window, ignore it. Otherwise we'll
believe it and then trigger an assert.
Also, change the interface for networkstatus_get_param() so we
don't have to lookup the consensus beforehand.
A) We were considering a circuit had timed out in the special cases
where we close rendezvous circuits because the final rendezvous
circuit couldn't be built in time.
B) We were looking at the wrong timestamp_created when considering
a timeout.
Don't discard all circuits every MaxCircuitDirtiness, because the
user might legitimately have set that to a very lower number.
Also don't use up all of our idle circuits with testing circuits,
since that defeats the point of preemptive circuits.
We want it to be under our control so it doesn't mess
up initialization. This is likely the cause for
the bug the previous assert-adding commit (09a75ad) was
trying to address.
Using CircuitBuildTimeout is prone to issues with SIGHUP, etc.
Also, shuffle the circuit build times array after loading it
in so that newer measurements don't replace chunks of
similarly timed measurements.
To further attempt to fix bug 1090, make sure connection_ap_can_use_exit
always returns 0 when the chosen exit router is excluded. This should fix
bug1090.
When we excluded some Exits, we were sometimes warning the user that we
were going to use the node regardless. Many of those warnings were in
fact bogus, because the relay in question was not used to connect to
the outside world.
Based on patch by Rotor, thanks!
Tor now reads the "circwindow" parameter out of the consensus,
and uses that value for its circuit package window rather than the
default of 1000 cells. Begins the implementation of proposal 168.
This code adds a new field to vote on: "params". It consists of a list of
sorted key=int pairs. The output is computed as the median of all the
integers for any key on which anybody voted.
Improved with input from Roger.
Adding the same vote to a networkstatus consensus leads to a memory leak
on the client side. Fix that by only using the first vote from any given
voter, and ignoring the others.
Problem found by Rotor, who also helped writing the patch. Thanks!
A vote may only contain exactly one signature. Make sure we reject
votes that violate this.
Problem found by Rotor, who also helped writing the patch. Thanks!
Fix an obscure bug where hidden services on 64-bit big-endian
systems might mis-read the timestamp in v3 introduce cells, and
refuse to connect back to the client. Discovered by "rotor".
Bugfix on 0.2.1.6-alpha.
Add a "getinfo status/accepted-server-descriptor" controller
command, which is the recommended way for controllers to learn
whether our server descriptor has been successfully received by at
least on directory authority. Un-recommend good-server-descriptor
getinfo and status events until we have a better design for them.
We were telling the controller about CHECKING_REACHABILITY and
REACHABILITY_FAILED status events whenever we launch a testing
circuit or notice that one has failed. Instead, only tell the
controller when we want to inform the user of overall success or
overall failure. Bugfix on 0.1.2.6-alpha. Fixes bug 1075. Reported
by SwissTorExit.
When we added support for fractional units (like 1.5 MB) I broke
support for giving units with no space (like 2MB). This patch should
fix that. It also adds a propoer tor_parse_double().
Fix for bug 1076. Bugfix on 0.2.2.1-alpha.
We were triggering a CLOCK_SKEW controller status event whenever
we connect via the v2 connection protocol to any relay that has
a wrong clock. Instead, we should only inform the controller when
it's a trusted authority that claims our clock is wrong. Bugfix
on 0.2.0.20-rc; starts to fix bug 1074. Reported by SwissTorExit.
- Refactor geoip.c by moving duplicate code into rotate_request_period().
- Don't leak memory when cleaning up cell queues.
- Make sure that exit_(streams|bytes_(read|written)) are initialized in all
places accessing these arrays.
- Read only the last block from *stats files and ensure that its timestamp
is not more than 25 hours in the past and not more than 1 hour in the
future.
- Stop truncating the last character when reading *stats files.
The only thing that's left now is to avoid reading whole *stats files into
memory.
Note that unlike subversion revision numbers, it isn't meaningful to
compare these for anything but equality. We define a sort-order anyway,
in case one of these accidentally slips into a recommended-versions
list.
If any the v3 certs we download are unparseable, we should actually
notice the failure so we don't retry indefinitely. Bugfix on 0.2.0.x;
reported by "rotator".
The more verbose logs that were added in ee58153 also include a string
that might not have been initialized. This can lead to segfaults, e.g.,
when setting up private Tor networks. Initialize this string with NULL.
Send circuit or stream sendme cells when our window has decreased
by 100 cells, not when it has decreased by 101 cells. Bug uncovered
by Karsten when testing the "reduce circuit window" performance
patch. Bugfix on the 54th commit on Tor -- from July 2002,
before the release of Tor 0.0.0. This is the new winner of the
oldest-bug prize.
I don't think we actually use (or plan to use) strtok_r in a reentrant
way anywhere in our code, but would be nice not to have to think about
whether we're doing it.
Relays no longer publish a new server descriptor if they change
their MaxAdvertisedBandwidth config option but it doesn't end up
changing their advertised bandwidth numbers. Bugfix on 0.2.0.28-rc;
fixes bug 1026. Patch from Sebastian.
Specifically, every time we get a create cell but we have so many already
queued that we refuse it.
Bugfix on 0.2.0.19-alpha; fixes bug 1034. Reported by BarkerJr.
The problem is that clients and hidden services are receiving
relay_early cells, and they tear down the circuit.
Hack #1 is for rendezvous points to rewrite relay_early cells to
relay cells. That way there are never any incoming relay_early cells.
Hack #2 is for clients and hidden services to never send a relay_early
cell on an established rendezvous circuit. That works around rendezvous
points that haven't upgraded yet.
Hack #3 is for clients and hidden services to not tear down the circuit
when they receive an inbound relay_early cell. We already refuse extend
cells at clients.
When determining how long directory requests take or how long cells spend
in queues, we were comparing timestamps on microsecond detail only to
convert results to second or millisecond detail later on. But on 32-bit
architectures this means that 2^31 microseconds only cover time
differences of up to 36 minutes. Instead, compare timestamps on
millisecond detail.
Now that we require EntryStatistics to be 1 for counting connecting
clients, unit tests need to set that config option, too.
Reported by Sebastian Hahn.
Changes to directory request statistics:
- Rename GEOIP statistics to DIRREQ statistics, because they now include
more than only GeoIP-based statistics, whereas other statistics are
GeoIP-dependent, too.
- Rename output file from geoip-stats to dirreq-stats.
- Add new config option DirReqStatistics that is required to measure
directory request statistics.
- Clean up ChangeLog.
Also ensure that entry guards statistics have access to a local GeoIP
database.
This new option will allow clients to download the newest fresh consensus
much sooner than they normally would do so, even if they previously set
FetchDirInfoEarly. This includes a proper ChangeLog entry and an updated man
page.
Introduce a threshold of 0.01% of bytes that must be read and written per
port in order to be included in the statistics. Otherwise we cannot include
these statistics in extra-info documents, because they are too big.
Change the labels "-written" and "-read" so that the meanings are as
intended.
The internal error "could not find intro key" occurs when we want to send
an INTRODUCE1 cell over a recently finished introduction circuit and think
we built the introduction circuit with a v2 hidden service descriptor, but
cannot find the introduction key in our descriptor.
My first guess how we can end up in this situation is that we are wrong in
thinking that we built the introduction circuit based on a v2 hidden
service descriptor. This patch checks if we have a v0 descriptor, too, and
uses that instead.
o Minor features:
- If we're a relay and we change our IP address, be more verbose
about the reason that made us change. Should help track down
further bugs for relays on dynamic IP addresses.
when we write out our stability info, detect relays that have slipped
through the cracks. log about them and correct the problem.
if we continue to see a lot of these over time, it means there's another
spot where relays fall out of the routerlist without being marked as
unreachable.
Marks the control port connection for flushing before closing when
the QUIT command is issued. This allows a QUIT to be issued during
a long reply over the control port, flushing the reply and then
closing the connection. Fixes bug 1015.
rather than the bandwidth values in each relay descriptor. This approach
opens the door to more accurate bandwidth estimates once the directory
authorities start doing active measurements. Implements more of proposal
141.
arma's rationale: "I think this is a bug, since people intentionally
set DirPortFrontPage, so they really do want their relay to serve that
page when it's asked for. Having it appear only sometimes (or roughly
never in Sebastian's case) makes it way less useful."
Fixes bug 1013; bugfix on 0.2.1.8-alpha.
Added a sanity check in config.c and a check in directory.c
directory_initiate_command_rend() to catch any direct connection attempts
when a socks proxy is configured.
The rest of the code was only including event.h so that it could see
EV_READ and EV_WRITE, which we were using as part of the
connection_watch_events interface for no very good reason.
This patch adds a new compat_libevent.[ch] set of files, and moves our
Libevent compatibility and utilitity functions there. We build them
into a separate .a so that nothing else in src/commmon depends on
Libevent (partially fixing bug 507).
Also, do not use our own built-in evdns copy when we have Libevent
2.0, whose evdns is finally good enough (thus fixing Bug 920).
Fix an edge case where a malicious exit relay could convince a
controller that the client's DNS question resolves to an internal IP
address. Bug found and fixed by "optimist"; bugfix on 0.1.2.8-beta.
Fix an edge case where a malicious exit relay could convince a
controller that the client's DNS question resolves to an internal IP
address. Bug found and fixed by "optimist"; bugfix on 0.1.2.8-beta.
Hidden service clients didn't use a cached service descriptor that
was older than 15 minutes, but wouldn't fetch a new one either. Now,
use a cached descriptor no matter how old it is and only fetch a new
one when all introduction points fail. Fix for bug 997. Patch from
Marcus Griep.
Apparently all the stuff that does a linear scan over all the DNS
cache entries can get really expensive when your DNS cache is very
large. It's hard to say how much this will help performance, since
gprof doesn't count time spent in OpenSSL or zlib, but I'd guess 10%.
Also, this patch removes calls to assert_connection_ok() from inside
the read and write callbacks, which are similarly unneeded, and a
little costlier than I'm happy with.
This is probably worth backporting to 0.2.0.
Provide a useful warning when launch_circuit tries to make us use a
node we don't want to use. Just give an info message when this is a
normal and okay situation. Fix for logging issues in bug 984.
This patch adds a function to determine whether we're in the main
thread, and changes control_event_logmsg() to return immediately if
we're in a subthread. This is necessary because otherwise we will
call connection_write_to_buf, which modifies non-locked data
structures.
Bugfix on 0.2.0.x; fix for at least one of the things currently
called "bug 977".
Tas (thanks!) noticed that when *ListenAddress is set, Tor would
still warn on startup when *Port is low and hibernation is active.
The patch parses all the *ListenAddress lines, and checks the
ports. Bugfix on 0.2.1.15-rc
With the last fix of task 932 (5f03d6c), client requests are only added to
the history when they happen after the start of the current history. This
conflicts with the unit tests that insert current requests first (defining
the start of the client request history) followed by requests in the past.
The fix is to insert requests in chronological order in the unit tests.
- Write geoip stats to disk every 24 hours, not every hour.
- Remove configuration options and define reasonable defaults.
- Clear history of client requests every 24 hours (which wasn't done at
all before).
Specifically if you send SIGUSR1, it will add two lines to the log file:
May 22 07:41:59.576 [notice] Our DNS cache has 3364 entries.
May 22 07:41:59.576 [notice] Our DNS cache size is approximately 1022656
bytes.
[tweaked a bit by nickm]
Really, our idiocy was that we were calling event_set() on the same
event more than once, which sometimes led to us calling event_set() on
an event that was already inserted, thus making it look uninserted.
With this patch, we just initialize the timeout events when we create
the requests and nameservers, and we don't need to worry about
double-add and double-del cases at all.
If we ever add an event, then set it, then add it again, there will be
now two pointers to the event in the event base. If we delete one and
free it, the first pointer will still be there, and possibly cause a
crash later.
This patch adds detection for this case to the code paths in
eventdns.c, and works around it. If the warning message ever
displays, then a cleverer fix is in order.
{I am not too confident that this *is* the fix, since bug 957 is very
tricky. If it is, it is a bugfix on 0.2.0.}
When we got a descriptor that we (as an authority) rejected as totally
bad, we were freeing it, then using the digest in its RAM to look up its
download status. Caught by arma with valgrind. Bugfix on 0.2.1.9-alpha.
Bridges are not supposed to publish router descriptors to the directory
authorities. It defeats the point of bridges when they are included in the
public relay directory.
This patch puts out a warning and exits when the node is configured as
a bridge and to publish v1, v2, or v3 descriptors at the same time.
Also fixes part of bug 932.
This addresses the first part of bug 918. Users are now warned when
they try to use hibernation in combination with a port below 1024
when they're not on Windows. We don't want to die here, because
people might run Tor as root, use a capabilities system or some
other platform that will allow them to re-attach low ports.
Wording suggested by Marian
(Don't crash immediately if we have leftover chunks to free after
freeing chunks in a buffer freelist; instead log a debugging message
that might help.)
