This unifies CircuitIdleTimeout and PredictedCircsRelevanceTime into a single
option, and randomizes it.
It also gives us control over the default value as well as relay-to-relay
connection lifespan through the consensus.
Conflicts:
src/or/circuituse.c
src/or/config.c
src/or/main.c
src/test/testing_common.c
This defense will cause Cisco, Juniper, Fortinet, and other routers operating
in the default configuration to collapse netflow records that would normally
be split due to the 15 second flow idle timeout.
Collapsing these records should greatly reduce the utility of default netflow
data for correlation attacks, since all client-side records should become 30
minute chunks of total bytes sent/received, rather than creating multiple
separate records for every webpage load/ssh command interaction/XMPP chat/whatever
else happens to be inactive for more than 15 seconds.
The defense adds consensus parameters to govern the range of timeout values
for sending padding packets, as well as for keeping connections open.
The defense only sends padding when connections are otherwise inactive, and it
does not pad connections used solely for directory traffic at all. By default
it also doesn't pad inter-relay connections.
Statistics on the total padding in the last 24 hours are exported to the
extra-info descriptors.
Stop modifying the value of our torrc option HiddenServiceStatistics just
because we're not a bridge or relay. This bug was causing Tor Browser users to
write "HiddenServiceStatistics 0" in their torrc files as if they had chosen
to change the config.
Fixes#21150
Signed-off-by: David Goulet <dgoulet@torproject.org>
The server-side clipping now clamps to one of two values, both
for what to report, and how long to cache.
Additionally, we move some defines to dns.h, and give them better
names.
When marking for close a circuit, the reason value, a integer, was assigned to
a uint16_t converting any negative reasons (internal) to the wrong value. On
the HS side, this was causing the client to flag introduction points to be
unreachable as the internal reason was wrongfully converted to a positive
16bit value leading to flag 2 out of 3 intro points to be unreachable.
Fixes#20307 and partially fixes#21056
Signed-off-by: David Goulet <dgoulet@torproject.org>
The new HS circuitmap API replaces old public functions as follows:
circuit_clear_rend_token -> hs_circuitmap_remove_circuit
circuit_get_rendezvous -> hs_circuitmap_get_rend_circ
circuit_get_intro_point -> hs_circuitmap_get_intro_circ_v2
circuit_set_rendezvous_cookie -> hs_circuitmap_register_rend_circ
circuit_set_intro_point_digest -> hs_circuitmap_register_intro_circ_v2
This commit also removes the old rendinfo code that is now unused.
It also fixes the broken rendinfo unittests.
The HS circuitmap is a hash table that maps introduction and rendezvous
tokens to specific circuits such that given a token it's easy to find
the corresponding circuit. It supports rend circuits and v2/v3 intro
circuits.
It will be used by the prop224 ESTABLISH_INTRO code to register and
lookup v3 introduction circuits.
The next commit after this removes the old code and fixes the unittests.
Please consult both commits while reviewing functionality differences
between the old and new code. Let me know if you want this rebased
differently :)
WRT architectural differences, this commit removes the rendinfo pointer
from or_circuit_t. It then adds an hs_token_t pointer and a hashtable
node for the HS circuitmap. IIUC, this adds another pointer to the
weight of or_circuit_t. Let me know if you don't like this, or if you
have suggestions on improving it.
Back when Roger had do do most of our testing on the moria host, we
needed a higher limit for the number of relays running on a single
IP address when that limit was shared with an authority. Nowadays,
the idea is pretty obsolete.
Also remove the router_addr_is_trusted_dir() function, which served
no other purpose.
Closes ticket 20960.
If there is some horrible bug in our ed25519 link authentication
code that causes us to label every single ed25519-having node as
non-running, we'll be glad we had this. Otherwise we can remove it
later.
I need to be able to turn on Ed25519 support in client generation
of extend cells so I can test it, but leave it off-by-default until
enough clients support it for us to turn it on for a bunch at once.
This is part of #15056 / prop#220.
To do this, it makes sense to treat legacy guards as a separate
guard_selection_t *, and handle them separately. This also means we
add support here for having multiple guard selections.
Note that we don't persist pathbias information yet; that will take
some refactoring.
This patch doesn't cover every case; omitted cases are marked with
"XXXX prop271", as usual. It leaves both the old interface and the
new interface for guard status notification, since they don't
actually work in the same way: the new API wants to be told when a
circuit has failed or succeeded, whereas the old API wants to know
when a channel has failed or succeeded.
I ran into some trouble with directory guard stuff, since when we
pick the directory guard, we don't actually have a circuit to
associate it with. I solved that by allowing guard states to be
associated with directory connections, not just circuits.
I expect we'll be ripping this out somewhere in 0.3.0, but let's
keep it around for a little while in case it turns out to be the
only way to avert disaster?
This state corresponds to the WAITING_FOR_BETTER_GUARD state; it's
for circuits that are 100% constructed, but which we won't use until
we are sure that we wouldn't use circuits with a better guard.
Here we add a little bit of state to origin circuits, and set up
the necessary functions for the circuit code to call in order to
find guards, use guards, and decide when circuits can be used.
There's also an incomplete function for the hard part of the
circuit-maintenance code, where we figure out whether any waiting
guards are ready to become usable.
(This patch finally uses the handle.c code to make safe handles to
entry_guard_t objects, so that we are allowed to free an
entry_guard_t without checking whether any origin_circuit_t is
holding a reference to it.)
In order to implement proposal 224, we need the data structure rend_data_t to
be able to accomodate versionning that is the current version of hidden
service (2) and the new version (3) and future version.
For that, we implement a series of accessors and a downcast function to get
the v2 data structure. rend_data_t becomes a top level generic place holder.
The entire rend_data_t API has been moved to hs_common.{c|h} in order to
seperate code that is shared from between HS versions and unshared code (in
rendcommon.c).
Closes#19024
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
This code stores the ed certs as appropriate, and tries to check
them. The Ed25519 result is not yet used, and (because of its
behavior) this will break RSA authenticate cells. That will get
fixed as we go, however.
This should implement 19157, but it needs tests, and it needs
to get wired in.
In particular, these functions are the ones that set the identity of
a given connection or channel, and/or confirm that we have learned
said IDs.
There's a lot of stub code here: we don't actually need to use the
new keys till we start looking up connections/channels by Ed25519
IDs. Still, we want to start passing the Ed25519 IDs in now, so it
makes sense to add these stubs as part of 15055.
See proposal 244. This feature lets us stop looking at the internals
of SSL objects, *and* should let us port better to more SSL libraries,
if they have RFC5705 support.
Preparatory for #19156
(Technically, we could just remove extend2 cell checking entirely,
since all Tor versions on our network are required to have it, but
let's keep this around as an example of How To Do It.)
