We cleared this value in second_elapsed_callback. But what were we
using it for? For detecting if Libevent returned EINVAL too often!
We already have a way to detect too-frequent events, and that's with
a ratelim_t. Refactor the code to use that instead. Closes ticket
26016.
This test was using the current time to pick the time period number,
and a randomly generated hs key. Therefore, it sometimes picked an
index that would wrap around the example dht, and sometimes would
not.
The fix here is just to fix the time period and the public key.
Fixes bug 25997; bugfix on 0.3.2.1-alpha.
When directory authorities read a zero-byte bandwidth file, they log
a warning with the contents of an uninitialised buffer. Log a warning
about the empty file instead.
Fixes bug 26007; bugfix on 0.2.2.1-alpha.
LibreSSL, despite not having the OpenSSL 1.1 API, does define
OPENSSL_VERSION in crypto.h. Additionally, it apparently annotates
some functions as returning NULL, so that our unit tests need to be
more careful about checking for NULL so they don't get compilation
warnings.
Closes ticket 26006.
This test, in test_client_pick_intro(), will have different coverage
depending on whether it selects a good intro point the first time or
whether it has to try a few times. Since it produces the shorter
coverage with P=1/4, repeat this test 64 times so that it only
provides reduced coverage with P=1/2^128. The performance cost is
negligible.
Closes ticket 25996. This test was introduced in 0.3.2.1-alpha.
I'd prefer not to do this for randomized tests, but as things stand
with this test, it produces nondeterministic test coverage.
Closes ticket 25995; bugfix on 0.2.2.2-alpha when this test was
introduced.
This change should make it impossible for the monotonic time to roll
over from one EWMA tick to the next during this test, and make it so
that this test never invokes scale_active_circuits() (which it
doesn't test).
(Earlier changes during the 0.3.4 series should make this call even
rarer than it was before, since we fixed#25927 and removed
cached_gettimeofday. Because this test didn't update
cached_gettimeofday, the chance of rolling over a 10-second interval
was much higher.)
Closes ticket 25994; bugfix on 0.3.3.1-alpha when this test was
introduced.
Arguably, the conditions under which these events happen should be a
bit different, but the rules are complex enough here that I've tried
to have this commit be pure refactoring.
Closes ticket 25952.
Finally, before this code goes away, take a moment to look at the
amazing way that we used to try to have an event happen
every N seconds:
get_uptime() / N != (get_uptime()+seconds_elapsed) / N
Truly, it is a thing of wonder. I'm glad we didn't start using this
pattern everywhere else.
Implement the ability to set flags per events which influences the set up of
the event.
This commit only adds one flag which is "need network" meaning that the event
is not enabled if tor has disabled the network or if hibernation mode.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Prior to #23100, we were not counting HS circuit build times in our
calculation of the timeout. This could lead to a condition where our timeout
was set too low, based on non HS circuit build times, and then we would
abandon all HS circuits, storing no valid timeouts in the histogram.
This commit avoids the assert.
Previously were using this value to have a cheap highish-resolution
timer. But we were only using it in one place, and current dogma is
to use monotime_coarse_t for this kind of thing.
This part of the code was the only part that used "cached
getttimeofday" feature, which wasn't monotonic, which we updated at
slight expense, and which I'd rather not maintain.
Now that we update our buckets on demand before reading or writing,
we no longer need to update them all every TokenBucketRefillInterval
msec.
When a connection runs out of bandwidth, we do need a way to
reenable it, however. We do this by scheduling a timer to reenable
all blocked connections for TokenBucketRefillInterval msec after a
connection becomes blocked.
(If we were using PerConnBWRate more, it might make sense to have a
per-connection timer, rather than a single timeout. But since
PerConnBWRate is currently (mostly) unused, I'm going to go for the
simpler approach here, since usually whenever one connection has
become blocked on bandwidth, most connections are blocked on
bandwidth.)
Implements ticket 25373.
We used to do this 10x per second in connection_buckets_refill();
instead, we now do it when the bucket becomes empty. This change is
part of the work of making connection_buckets_refill() obsolete.
Closes ticket 25828; bugfix on 0.2.3.5-alpha.
This commit introduces the consensus parameter "circ_max_cell_queue_size"
which controls the maximum number of cells a circuit queue should have.
The default value is currently 50000 cells which is above what should be
expected but keeps us a margin of error for padding cells.
Related to this is #9072. Back in 0.2.4.14-alpha, we've removed that limit due
to a Guard discovery attack. Ticket #25226 details why we are putting back the
limit due to the memory pressure issue on relays.
Fixes#25226
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add to the Denial of Service section of the man page an explanation about the
three different mitigation Tor has.
Fixes#25248.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In d1874b4339, we adjusted this check so that we insist on
using routerinfos for bridges. That's almost correct... but if we
have a bridge that is also a regular relay, then we should use
insist on its routerinfo when connecting to it as a bridge
(directly), and be willing to use its microdescriptor when
connecting to it elsewhere in our circuits.
This bug is a likely cause of some (all?) of the (exit_ei == NULL)
failures we've been seeing.
Fixes bug 25691; bugfix on 0.3.3.4-alpha
This patch changes the algorithm of compute_real_max_mem_in_queues() to
use 0.4 * RAM iff the system has more than or equal to 8 GB of RAM, but
will continue to use the old value of 0.75 * RAM if the system have less
than * GB of RAM available.
This patch also adds tests for compute_real_max_mem_in_queues().
See: https://bugs.torproject.org/24782
This one happens if for some reason you start with DirPort enabled
but server mode turned off entirely.
Fixes a case of bug 23693; bugfix on 0.3.1.1-alpha.
This patch lifts the list of default directory authorities from config.c
into their own auth_dirs.inc file, which is then included in config.c
using the C preprocessor.
Patch by beastr0.
See: https://bugs.torproject.org/24854
Both in geoip_note_client_seen() and options_need_geoip_info(), switch from
accessing the options directly to using the should_record_bridge_info() helper
function.
Fixes#25290
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a relay is collecting internal statistics about how many
create cell requests it has seen of each type, accurately count the
requests from relays that temporarily fall out of the consensus.
(To be extra conservative, we were already ignoring requests from clients
in our counts, and we continue ignoring them here.)
Fixes bug 24910; bugfix on 0.2.4.17-rc.
Directory authorities no longer vote in favor of the Guard flag
for relays that don't advertise directory support.
Starting in Tor 0.3.0.1-alpha, Tor clients have been avoiding using
such relays in the Guard position, leading to increasingly broken load
balancing for the 5%-or-so of Guards that don't advertise directory
support.
Fixes bug 22310; bugfix on 0.3.0.6.
Add a missing lock acquisition around access to queued_control_events
in control_free_all(). Use the reassign-and-unlock strategy as in
queued_events_flush_all(). Fixes bug 25675. Coverity found this bug,
but only after we recently added an access to
flush_queued_event_pending.
The anchor here was originally introduced to make sure that the
manpage would format correctly, but we had mistaken it for a section
anchor, and introduced a bogus section heading in 3563a2c819.
Fixes bug 25582; bugfix on 0.3.3.1-alpha.
Coverity found a null pointer reference in nodelist_add_microdesc().
This is almost certainly impossible assuming that the routerstatus_t
returned by router_get_consensus_status_by_descriptor_digest() always
corresponds to an entry in the nodelist. Fixes bug 25629.
Coverity found a null pointer reference in nodelist_add_microdesc().
This is almost certainly impossible assuming that the routerstatus_t
returned by router_get_consensus_status_by_descriptor_digest() always
corresponds to an entry in the nodelist. Fixes bug 25629.
Coverity found a null pointer reference in nodelist_add_microdesc().
This is almost certainly impossible assuming that the routerstatus_t
returned by router_get_consensus_status_by_descriptor_digest() always
corresponds to an entry in the nodelist. Fixes bug 25629.
If we failed to connect at the TCP level to a relay, note it down and refuse
to connect again for another 60 seconds.
Fixes#24767
Signed-off-by: David Goulet <dgoulet@torproject.org>
This update is needed to make it consistent with the behavior of
node_awaiting_ipv6(), which doesn't believe in the addresses from
routerinfos unless it actually plans to use those routerinfos.
Fixes bug 25213; bugfix on b66b62fb75 in 0.3.3.1-alpha,
which tightened up the definition of node_awaiting_ipv6().
There was a nonfatal assertion in pathbias_should_count that would
trigger if onehop_tunnel was set, but the desired_path_length was
greater than 1. This patch fixes that. Fixes bug 24903; bugfix on
0.2.5.2-alpha.
Make sure we actually only report client channel to the geoip cache instead of
looking if it is a known relay. Looking if it is a known relay can be
unreliable because they come and go from the consensus.
Fixes#24904
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because of #25306 for which we are unable to reproduce nor understand how it
is possible, this commit removes the asserts() and BUG() on the missing
descriptors instead when rotating them.
This allows us to log more data on error but also to let tor recover
gracefully instead of dying.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch adds some additional logging to circuits_handle_oom() to give
us more information about which specific compression backend that is
using a certain amount of memory.
See: https://bugs.torproject.org/25372
This should avoid most intermittent test failures on developer and CI machines,
but there could (and probably should) be a more elegant solution.
Also, this test was testing that the IP was created and its expiration time was
set to a time greater than or equal to `now+INTRO_POINT_LIFETIME_MIN_SECONDS+5`:
/* Time to expire MUST also be in that range. We add 5 seconds because
* there could be a gap between setting now and the time taken in
* service_intro_point_new. On ARM, it can be surprisingly slow... */
tt_u64_op(ip->time_to_expire, OP_GE,
now + INTRO_POINT_LIFETIME_MIN_SECONDS + 5);
However, this appears to be a typo, since, according to the comment above it,
adding five seconds was done because the IP creation can be slow on some
systems. But the five seconds is added to the *minimum* time we're comparing
against, and so it actually functions to make this test *more* likely to fail on
slower systems. (It should either subtract five seconds, or instead add it to
time_to_expire.)
* FIXES#25450: https://bugs.torproject.org/25450
The C code and the rust code had different separate integer overflow
bugs here. That suggests that we're better off just forbidding this
pathological case.
Also, add tests for expected behavior on receiving a bad protocol
list in a consensus.
Fixes another part of 25249.
This one can only be exploited if you can generate a correctly
signed consensus, so it's not as bad as 25074.
Fixes bug 25251; also tracked as TROVE-2018-004.
In some cases we had checked for it, but in others we had not. One
of these cases could have been used to remotely cause
denial-of-service against directory authorities while they attempted
to vote.
Fixes TROVE-2018-001.
since all it does is produce false positives
this commit should get merged into 0.2.9 and 0.3.0 *and* 0.3.1, even
though the code in the previous commit is already present in 0.3.1. sorry
for the mess.
[Cherry-picked]
since all it does is produce false positives
this commit should get merged into 0.2.9 and 0.3.0 *and* 0.3.1, even
though the code in the previous commit is already present in 0.3.1. sorry
for the mess.
This commit takes a piece of commit af8cadf3a9 and a piece of commit
46fe353f25, with the goal of making channel_is_client() be based on what
sort of connection handshake the other side used, rather than seeing
whether the other side ever sent a create_fast cell to us.
We had this safeguard around dos_init() but not when the consensus changes
which can modify consensus parameters and possibly enable the DoS mitigation
even if tor wasn't a public relay.
Fixes#25223
Signed-off-by: David Goulet <dgoulet@torproject.org>
Explicitly inform the operator of the rejected relay to set a valid email
address in the ContactInfo field and contact bad-relays@ mailing list.
Fixes#25170
Signed-off-by: David Goulet <dgoulet@torproject.org>
Explicitly inform the operator of the rejected relay to set a valid email
address in the ContactInfo field and contact bad-relays@ mailing list.
Fixes#25170
Signed-off-by: David Goulet <dgoulet@torproject.org>
At this commit, the SocksSocketsGroupWritable option is renamed to
UnixSocksGroupWritable. A deprecated warning is triggered if the old option is
used and tor will use it properly.
Fixes#24343
Signed-off-by: David Goulet <dgoulet@torproject.org>
On slow system, 1 msec between one read and the other was too tight. For
instance, it failed on armel with a 4msec gap:
https://buildd.debian.org/status/package.php?p=tor&suite=experimental
Increase to 10 msec for now to address slow system. It is important that we
keep this OP_LE test in so we make sure the msec/usec/nsec read aren't
desynchronized by huge gaps. We'll adjust again if we ever encounter a system
that goes slower than 10 msec between calls.
Fixes#25113
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove a series of connection counters that were only used when dumping the
rephist statistics with SIGUSR1 signal.
This reduces the or_history_t structure size.
Closes#25163
Signed-off-by: David Goulet <dgoulet@torproject.org>
Services can keep rendezvous circuits for a while so don't log them if tor is
a single onion service.
Fixes#25116
Signed-off-by: David Goulet <dgoulet@torproject.org>
If the cache is using 20% of our maximum allowed memory, clean 10% of it. Same
behavior as the HS descriptor cache.
Closes#25122
Signed-off-by: David Goulet <dgoulet@torproject.org>
This reverts commit 9a06282546.
It appears that I misunderstood how the seccomp2 filter rules
interact. It appears that `SCMP_ACT_ERRNO()` always takes
precedence over `SCMP_ACT_ALLOW()` -- I had thought instead that
earlier rules would override later ones. But this change caused bug
25115 (not in any released Tor).
The accurate address of a connection is real_addr, not the addr member.
channel_tls_get_remote_addr_method() now returns real_addr instead.
Fixes#24952; bugfix on 707c1e2 in 0.2.4.11-alpha.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Tor preemptiely builds circuits and they can be cannibalized later in their
lifetime. A Guard node can become unusable (from our guard state) but we can
still have circuits using that node opened. It is important to not pick those
circuits for any usage through the cannibalization process.
Fixes#24469
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 0.3.2.1-alpha, we've added notify_networkstatus_changed() in order to have
a way to notify other subsystems that the consensus just changed. The old and
new consensus are passed to it.
Before this patch, this was done _before_ the new consensus was set globally
(thus NOT accessible by getting the latest consensus). The scheduler
notification was assuming that it was set and select_scheduler() is looking at
the latest consensus to get the parameters it might needs. This was very wrong
because at that point it is still the old consensus set globally.
This commit changes the notify_networkstatus_changed() to be the "before"
function and adds an "after" notification from which the scheduler subsystem
is notified.
Fixes#24975
This is the quick fix that is keeping the channel in PENDING state so if we
ever try to reschedule the same channel, it won't happened.
Fixes#24700
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is possible in normal circumstances that a client fetches a descriptor
that has a lower revision counter than the one in its cache. This can happen
due to HSDir desync.
Fixes#24976
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 0.3.2.1-alpha, we've added this function in order to have a way to notify
other subsystems that the consensus just changed. The old consensus and the
new one are passed to it.
Before this patch, this was done _before_ the new consensus was set globally
(thus NOT accessible by getting the latest consensus). The scheduler
notification was assuming that it was set and select_scheduler() is looking at
the latest consensus to get the parameters it might needs. This was very wrong
because at that point it is still the old consensus set globally.
With this commit, notify_networkstatus_changed() has been moved _after_ the
new consensus is set globally. The main obvious reasons is to fix the bug
described above and in #24975. The other reason is that this notify function
doesn't return anything which could be allowing the possibility of refusing to
set the new consensus on error. In other words, the new consensus is set right
after the notification whatever happens.
It does no harm or change in behavior to set the new consensus first and then
notify the subsystems. The two functions currently used are for the control
port using the old and new consensus and sending the diff. The second is the
scheduler that needs the new consensus to be set globally before being called.
Of course, the function has been documented accordinly to clearly state it is
done _after_ the new consensus is set.
Fixes#24975
Signed-off-by: David Goulet <dgoulet@torproject.org>
Stop adding unneeded channel padding right after we finish flushing
to a connection that has been trying to flush for many seconds.
Instead, treat all partial or complete flushes as activity on the
channel, which will defer the time until we need to add padding.
This fix should resolve confusing and scary log messages like
"Channel padding timeout scheduled 221453ms in the past."
Fixes bug 22212; bugfix on 0.3.1.1-alpha.
I think technically we could resolve bug 22212 by adding a call to
channel_timestamp_active() only in the finished_flushing case. But I added
a call in the flushed_some case too since that seems to more accurately
reflect the notion of "active".
I'm leaving the getsockname code in transproxy alone, since it is
comparatively isolated, rather platform-specific, and hard to test.
Implements 18105.
We'd been using crypto_digest_dup() and crypto_digest_assign() here,
but they aren't necessary. Instead we can just use the stack to
store the previous state of the SHA_CTX and avoid a malloc/free pair.
Closes ticket 24914.
This patch updates the HiddenServiceVersion man-page entry to only
accept either 2 or 3 as argument and not a list of multiple versions.
See: https://bugs.torproject.org/25026
In order to make the OR and dir checking functions in router.c less confusing
we renamed some functions and splitted consider_testing_reachability() into
router_should_check_reachability() and router_do_reachability_checks(). Also we
improved the documentation.
Fixes#18918.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Previously, we wouldn't do this when running with a routerinfo_t in
some cases, leading to many needless calls to the protover module.
This change also cleans up the code in nodelist.c a bit.
Fixes bug 25008; bugfix on 0.2.9.4-alpha.
Without this patch, not only will TLS1.3 not work with Tor, but
OpenSSL 1.1.1 with TLS1.3 enabled won't build any connections at
all: It requires that either TLS1.3 be disabled, or some TLS1.3
ciphersuites be listed.
Closes ticket 24978.
For 23847, we want Tor to be able to shut down and then restart in
the same process. Here's a patch to make the Tor binary do that.
To test it, you need to build with --enable-restart-debugging, and
then you need to set the environment variable TOR_DEBUG_RESTART.
With this option, Tor will then run for 5 seconds, then restart
itself in-process without exiting. This only happens once.
You can change the 5-second interval using
TOR_DEBUG_RESTART_AFTER_SECONDS.
Implements ticket 24583.
Fix an "off by 2" error in counting rendezvous failures on the onion
service side.
While we thought we would stop the rendezvous attempt after one failed
circuit, we were actually making three circuit attempts before giving up.
Fixes bug 24895; bugfix on 0.0.6.
Fix a set of false positives where relays would consider connections
to other relays as being client-only connections (and thus e.g.
deserving different link padding schemes) if those relays fell out
of the consensus briefly.
Now we look only at the initial handshake and whether the connection
authenticated as a relay.
Fixes bug 24898; bugfix on 0.3.1.1-alpha.
New-style (v3) onion services now obey the "max rendezvous circuit
attempts" logic.
Previously they would make as many rendezvous circuit attempts as they
could fit in the MAX_REND_TIMEOUT second window before giving up.
Fixes bug 24894; bugfix on 0.3.2.1-alpha.
Define TOR_PRIuSZ as minGW compiler doesn't support zu format specifier for
size_t type.
Fixes#24861 on ac9eebd.
Signed-off-by: Fernando Fernandez Mancera <ffernandezmancera@gmail.com>
... in get_interface_addresses_ioctl().
This pointer alignment issue exists on x86_64 macOS, but is unlikely to exist
elsewhere. (i386 macOS only requires 4-byte alignment, and other OSs have
8-byte ints.)
Fixes bug 24733; not in any released version of tor.
