This function once served to let circuits continue to be built over
version-1 link connections. But such connections are long-obsolete,
and it's time to remove this check.
Closes#40081.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
protover_contains_long_protocol_names protover_list_is_invalid
Added tests for
1. commit_max
2. advance_obs
3. add_obs
4. rep_hist_fill_bandwidth_history
5. rep_hist_get_bandwidth_lines
(Lightly edited by nickm to use new names from bwhist refactoring.)
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
We found this in #40076, after we started using buf_move_all() in
more places. Fixes bug #40076; bugfix on 0.3.3.1-alpha. As far as
I know, the crash only affects master, but I think this warrants a
backport, "just in case".
This function tried to modify an array in place, but did it in a
pretty confusing and complicated way. I've revised it to follow a
much more straightforward approach.
Fixes bug #40065.
Fix crash introduced in #40020. On startup, tor calls
check_private_dir on the data and key directories. This function
uses open instead of opendir on the received directory. Data and
key directoryes are only opened here, so the seccomp rule added
should be for open instead of opendir, despite the fact that they
are directories.
On an IPv6 reachability failure test, if the address was configured, don't
publish the descriptor and log warn. If the address was auto discovered, still
publish the descriptor.
Closes#33247.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Enum allows us to easily compare what is being returned but also better
semantic to the code.
Related #33247
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now support IPv4 _and_ IPv6.
This also cleans up nicely the function that was moving IPv4 addresses from
uint32_t to tor_addr_t.
Fixes#40058
Signed-off-by: David Goulet <dgoulet@torproject.org>
Without this fix, if an PT forgets to send a USERADDR command, that
results in a connection getting treated as local for the purposes of
rate-limiting.
If the PT _does_ use USERADDR, we still believe it.
Closes ticket 33747.
Previously we tolerated up to 1.5 connections for every relay we
were connected to, and didn't warn if we had fewer than 5
connections total.
Now we tolerate up to 1.5 connections per relay, and up to 4
connections per authority, and we don't warn at all when we have
fewer than 25 connections total.
Fixes bug 33880, which seems to have been provoked by our #17592
change in 0.3.5.
In routerconf_find_ipv6_or_ap(), we check if the returned ORPort is internal
but not for listening. This means that IPv6 [::] is considered internal.
Thus, we can't use it, we have to look directly at the configured address and
port and if they are valid, we do consider that we have a valid IPv6 ORPort
and that we can thus extend in IPv6.
Related #33246
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now that tor automatically binds to IPv4 _and_ IPv6, in order to avoid
breaking configurations, we sanitize the parsed lists for duplicate ORPorts.
It is possible to happen because we still allow this configuration;
ORPort 9888
ORPort [4242::1]:9888
Meaning that the first ORPort value will bind to 0.0.0.0:9888 _and_ [::]:9888
which would lead to an error when attempting to bind on [4242::1]:9888.
However, that configuration is accepted today and thus we must not break it.
To remedy, we now sanitize the parsed list and prioritize an ORPort that has
an explicit address over the global one.
A warning is emitted if such configuration pattern is found. This is only for
the ORPort.
Related to #33246
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit makes it that if the ORPort is set with a single port, it will
bind to both global listen IPv4 and IPv6 addresses.
To pin an "ORPort <PORT>" to be IPv4 or IPv6, the IPv4Only/IPv6Only flags are
honored thus this will _only_ bind on IPv6 for that port value:
ORPort 9050 IPv6Only
Results in: [::]:9050
ORPort 9051 IPv4Only
Results in: [0.0.0.0]:9051
Attempting to configure an explicit IPv4 address with IPv6Only flag is an
error and vice versa.
Closes#33246
Signed-off-by: David Goulet <dgoulet@torproject.org>
These now (or_port and dir_port) now have "find" names, since they
look at the portcfg first, then at the actual ports from the
listeners.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
router_get_advertised_or_port routerconf_find_or_port \
router_get_advertised_ipv6_or_ap routerconf_find_ipv6_or_ap \
router_has_advertised_ipv6_orport routerconf_has_ipv6_orport \
router_get_advertised_dir_port routerconf_find_dir_port
Rationale: these don't actually give the first advertised
address/port, but instead give us the first such port that we are
_configured_ to advertise. Putting them in a portconf_ namespace
therefore makes sense.
Similarly, there are no other functions that get the first
configured advertised addr/port, so the "by_type_af()" part is needless.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
get_first_advertised_addr_by_type_af portconf_get_first_advertised_addr \
get_first_advertised_port_by_type_af portconf_get_first_advertised_port
This option controls if a tor relay will attempt address auto discovery and
thus ultimately publish an IPv6 ORPort in the descriptor.
Behavior is from proposal 312 section 3.2.6.
Closes#33245
Signed-off-by: David Goulet <dgoulet@torproject.org>
The ORPort can be IPv4Only which means that even if we can auto discover an
IPv6 address, we should not publish it because it would have an ORPort of 0.
Fixes#40054
Signed-off-by: David Goulet <dgoulet@torproject.org>
The need for casting negative syscall arguments depends on the
glibc version. This affects the rules for the openat syscall which
uses the constant AT_FDCWD that is defined as a negative number.
This commit adds logic to only apply the cast when necessary, on
glibc versions from 2.27 onwards.
Different versions of glibc use either open or openat for the
opendir function. This commit adds logic to use the correct rule
for each glibc version, namely:
- Until 2.14 open is used
- From 2.15 to to 2.21 openat is used
- From 2.22 to 2.26 open is used
- From 2.27 onwards openat is used
The need for casting negative syscall arguments depends on the
glibc version. This affects the rules for the openat syscall which
uses the constant AT_FDCWD that is defined as a negative number.
This commit adds logic to only apply the cast when necessary, on
glibc versions from 2.27 onwards.
Dirauth code use the warn log severity when calling find_my_address() which
made it that every time we would find an address, it would log a warning.
These are not needed below info level and thus set them to info level. An IP
change is set to notice by default.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead of a boolean saying "cache_only" add the concept of flags so we add
semantic through out the code and allow ourselves to have more options in the
future.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tell the relay find address interface to only use the cache so we don't
trigger an address resolve everytime the "GETINFO address" is called.
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previous development introduced the error of using 0/1 for a boolean
parameter. Fix that everywhere
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove use of router_pick_published_address() and use
relay_find_addr_to_publish instead.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
At the moment, this command only returns the IPv4. Do so by using the new
relay_find_addr_to_publish().
New commands to return IPv4 and IPv6 will be done with the work in tor#40039.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the new relay_has_address_set() interface when deciding if we need to
fetch directory information from an authority as a relay.
If no IPv4 address is found, we'll proceed with a fetch so we can learn our
address in the HTTP header or NETINFO cell that a trusted authority will send
us back.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tor periodic events have moved to a role base model where relays have specific
events. One of those is to rebuild the descriptor and that is ran every
minute.
This removes the call to router_rebuild_descriptor() from
router_get_my_routerinfo_with_err() because that is the only code path that
can call for a rebuild every second.
Instead, when we mark the descriptor as dirty, immediately reschedule the
descriptor check periodic event so it can be rebuilt that way instead of
randomly when router_get_my_routerinfo_with_err() is called.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a relay builds a new descriptor, use the new relay_find_addr_to_publish()
interface to find the address to publish per family.
This commit also make the check for address consistency to also work for a
configured IPv6 for which before it was IPv4 only.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
In case the transport has no usable address configured (likely 0.0.0.0 or
[::]), attempt to find the IPv4 and on failure, fallback to the IPv6. If none
are found, a log error is emitted and the transport is skiped.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order for a relay to find which address to publish in its descriptor,
router_pick_published_address() is used. However, that function only supports
AF_INET and uses the directory server suggested address discovery mechanism.
This new function uses a new interface so that the caller can request an
address family and get the tor_addr_t object. Furthermore, it drops the use of
directory servers address discovery (tor#33244) and instead uses the new
suggested cache that is populated at the moment from data in the NETINFO cell
coming from the directory authorities.
At this commit, function is unused.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Commit b14b1f2b1d was a mistake.
In case an Address statement is missing for the wanted family but another one
exists for another family, simply continue the address discovery.
It is not a mistake to be missing an Address statement for a family because
the address could simply be discovered by the next methods. Not all address
family requires a specific Address statement.
However, we do bail if we couldn't find any valid address for the requested
family _and_ a resolve failed meaning we had a hostname but couldn't resolve
it. In that case, we can't know if that hostname would have been for v4 or v6
thus we can't continue the address discovery properly.
Couple unit tests case were removed to match this reality.
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead of replacing connection_t.{addr,port} with a canonical
orport, and tracking the truth in real_addr, we now leave
connection_t.addr alone, and put the canonical address in
canonical_orport.
Closes#40042Closes#33898
(This is not fully general yet: we only pick randomly among
_supported_ addresses, and each extendinfo contains at most one IPv4
address and at most one IPv6 address, no matter what the extend cell
had.)
This change will help dual-stack relays do IPv6 reachability tests,
in theory, by having them sometimes do IPv4 connections and
sometimes do ipv6 connections.
Closes ticket 33220.
This fixes CID 1465291, which was a complaint that we never actually
checked the return value of this function. It turns out that this
function was failing, and it didn't matter, because it wasn't
necessary for this test.
This is an automated commit made with a python script.
After running the automated script, I had to hand-revert the cases where it
made the conversion functions call themselves.
Additionally, I had to edit a variable declaration in control_bootstrap.c so
that the result of a const cast could be put in a const field.
Only log the 'real_addr' when it is set to something.
Only log the ID when it is set.
When scrubbing the address, don't include a canonical address.
(There should never be a canonical address for a connection with no
ID set.)
Now that we've clarified that these functions only need to describe
the peer in a human-readable way, we can have them delegate to
connection_describe_peer().
This mode was only used in one place, and it caused a dangerous
mingling of functionality. The method is supposed to _describe_ the
peer's address, not give its actual address. We already had a
function to get the actual address.
* We no longer call this an optional method
* We document that it returns the real address, not a canonical one.
* We have it try harder if the real address hasn't been set yet.
Tests %include with files and folders, modifying and reloading
the config file with sandbox enabled and reponse of SAVECONF and
getinfo config-can-saveconf control commmands.
This patch ensures that we strip "\r" characters on both Windows as well
as Unix when we read text files. This should prevent the issue where
some Tor state files have been moved from a Windows machine, and thus
contains CRLF line ending, to a Unix machine where only \n is needed.
We add a test-case to ensure that we handle this properly on all our
platforms.
See: https://bugs.torproject.org/tpo/core/tor/33781
Pass the IPv4 before the IPv6 like all our other interfaces.
Changes unreleased code related to #40043.
Closes#40045
Signed-off-by: David Goulet <dgoulet@torproject.org>
This changes a LOT of code but in the end, behavior is the same.
Unfortunately, many functions had to be changed to accomodate but in majority
of cases, to become simpler.
Functions are also removed specifically those that were there to convert an
IPv4 as a host format to a tor_addr_t. Those are not needed anymore.
The IPv4 address field has been standardized to "ipv4_addr", the ORPort to
"ipv4_orport" (currently IPv6 uses ipv6_orport) and DirPort to "ipv4_dirport".
This is related to Sponsor 55 work that adds IPv6 support for relays and this
work is needed in order to have a common interface between IPv4 and IPv6.
Closes#40043.
Signed-off-by: David Goulet <dgoulet@torproject.org>
These fields have a complicated history, some slightly complicated
behavior, and some definitely inadequate documentation. Before we
go fixing them up, let's document how they work now.
Fix on unreleased code.
Logical || in the BUG() made it that it would always trigger the BUG().
Fixes#40034
Signed-off-by: David Goulet <dgoulet@torproject.org>
Fix on unreleased code.
The relay_new_address_suggestion() is called when a NETINFO cell is received
thus not only for relay or bridges.
Remove the BUG() that made sure only in server mode we could handle the
suggested address.
Fixes#40032
Signed-off-by: David Goulet <dgoulet@torproject.org>
We've done a lot to improve our internal APIs since we wrote this
code, and it shows. We can just use a buf_t to build up the
bandwidth lines, and save a bunch of stack fiddling.
Additionally, we can use a function to format a single line, and
thereby get rid of the cheezy pattern that does
for (i=0;i<n;++i) {
switch (i) {
...
}
...
}
Unclear but that somehow failed on Windows once (?) according to ticket #33768
but we are not seeing that failure.
Nevertheless, add a simple unit test.
Closes#33768
Signed-off-by: David Goulet <dgoulet@torproject.org>
This will make sure that we always properly initialize the cache by the exact
size all the time.
Related to #40022
Signed-off-by: David Goulet <dgoulet@torproject.org>
When receiving an introduction NACK, the client either decides to close or
re-extend the circuit to another intro point.
In order to do this, the service descriptor needs to exists but it is possible
that it gets removed from the cache between the establishement of the
introduction circuit and the reception of the (N)ACK.
For that reason, the BUG(desc == NULL) is removed because it is a possible
normal use case. Tor recovers gracefully already.
Fixes#34087
Signed-off-by: David Goulet <dgoulet@torproject.org>
It now uses the 'goto err' pattern, instead of the fatal_unreached()
pattern. The latter pattern is usually used when there is a loop, but there is
no loop in this function so it can be simplified easily.
This commit modifies the behavior of `parse_extended_address` in such a way
that if it fails, it will always return a `BAD_HOSTNAME` value, which is then
used to return the 0xF6 extended error code. This way, in any case that is
not a valid v2 address, we return the 0xF6 error code, which is the expected
behavior.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Built in tracing should _not_ be run if it was not set on purpose. Warn as
loud as we can in order to inform the user that they are running a version
with tracing capabilities built in.
This commit also adds a subsys stub because utlimately the logging will happen
in the init phase but because the default log file is not set in the
sys_logging init function, the stub is not useful for now.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to disambiguate the subsystem and event_name identifiers in the
tor_trace() macro, add TR_SUBSYS() and TR_EV() which help to identify the
parameters of tor_trace() explicitly.
Signed-off-by: David Goulet <dgoulet@torproject.org>
LTTng tracepoint probe declaration is not really following a C standard that
coccinelle and checkSpace.pl likes.
Move everything to a .inc file and standardize the trace_probes_circuit.h
header to include that LTTng specific file if the instrumentation was enabled
at configure time.
Part of #32910
Signed-off-by: David Goulet <dgoulet@torproject.org>
For now, trace_probes_circuit.c only contains LTTng probes so build it only if
enabled within in the build system _and_ the code.
Also, ignore trace_probes_circuit.h for coccinelle parsing.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is the very first tracepoint in tor. It is in the circuit subsystem for
when a new circuit opens.
LTTng instrumentation requires lot more around a tracepoint than USDT thus
this commit only adds one tracepoint in order to outline a base to add more
tracepoints later.
The idea is that we separate subsystem into what LTTng defines as "providers"
so the circuit provider contains the tracepoint definitions for the circuit
subsystem.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: David Goulet <dgoulet@torproject.org>
In the next commits, we'll add more tracing options for instrumentation and
specific tracer.
This rename follows a more meaningful naming standard. It also adds a catch
all "HAVE_TRACING" define that indicate in the code that we have tracing
enabled.
Part of #32910
Signed-off-by: David Goulet <dgoulet@torproject.org>
We do look at the address but with this we also look if the identity digest of
the relay suggesting us an address is a trusted source.
Related to #40022
Signed-off-by: David Goulet <dgoulet@torproject.org>
This reverts commit bf2a399fc0.
Don't set by default the prefer IPv6 feature on client ports because it breaks
the torsocks use case. The SOCKS resolve command is lacking a mechanism to ask
for a specific address family (v4 or v6) thus prioritizing IPv6 when an IPv4
address is asked on the resolve SOCKS interface resulting in a failure.
Tor Browser explicitly set PreferIPv6 so this should not affect the majority
of our users.
Closes#33796
Signed-off-by: David Goulet <dgoulet@torproject.org>
If no Address statement are found in the configuration file, attempt to learn
our address by looking at the ORPort address if any. Specifying an address is
optional so if we can't find one, it is fine, we move on to the next discovery
mechanism.
Note that specifying a hostname on the ORPort is not yet supported at this
commit.
Closes#33236
Signed-off-by: David Goulet <dgoulet@torproject.org>
Attempt to learn our address from the NETINFO cell.
At this commit, the address won't be used in the descriptor if selected. Next
commit will make it happen.
Related to #40022
Signed-off-by: David Goulet <dgoulet@torproject.org>
This behaves like router_new_address_suggestion() but differs in couple of
ways:
1. It takes a tor_addr_t instead of an address string and supports both
AF_INET and AF_INET6.
2. It does _not_ use the last_guessed_ip local cache and instead only relies
on the last resolved address cache in resolve_addr.c
It is not used at this commit. This function is made to process a suggested
address found in a NETINFO cell exactly like router_new_address_suggestion()
does with the address a directory suggests us.
Related to #40022
Signed-off-by: David Goulet <dgoulet@torproject.org>
Rename the static function update_resolved_cache() to resolved_addr_set_last()
and make it public.
We are about to use it in order to record any suggested address from a NETINFO
cell.
Related to #40022
Signed-off-by: David Goulet <dgoulet@torproject.org>
In the spirit of reducing technical debt. Move code that marks a channel as a
client into its own function and document it properly.
No behavior change, only code movement.
Related to #40022
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to process a NETINFO cell, the OR connection needs to go through a
series of validation else we don't process the cell.
Move those into its own function in and improve documentation.
This is an attempt at reducing technical debt of the rather large and
complicated channel_tls_process_netinfo_cell() function.
Related to #40022
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch changes our bits-to-bytes conversion logic in the NSS
implementation of `tor_tls_cert_matches_key()` from using (x >> 3) to
((x + 7) >> 3) since DER bit-strings are allowed to contain a number of
bits that is not a multiple of 8.
Additionally, we add a comment on why we cannot use the
`DER_ConvertBitString()` macro from NSS, as we would potentially apply
the bits-to-bytes conversion logic twice, which would lead to an
insignificant amount of bytes being compared in
`SECITEM_ItemsAreEqual()` and thus turn the logic into being a
prefix match instead of a full match.
The `DER_ConvertBitString()` macro is defined in NSS as:
/*
** Macro to convert der decoded bit string into a decoded octet
** string. All it needs to do is fiddle with the length code.
*/
#define DER_ConvertBitString(item) \
{ \
(item)->len = ((item)->len + 7) >> 3; \
}
Thanks to Taylor Yu for spotting this problem.
This patch is part of the fix for TROVE-2020-001.
See: https://bugs.torproject.org/33119
We add constness to `peer_info_orig_len` and `cert_info_orig_len` in
`tor_tls_cert_matches_key` to ensure that we don't accidentally alter
the variables.
This patch is part of the fix for TROVE-2020-001.
See: https://bugs.torproject.org/33119
This patch fixes an out-of-bound memory read in
`tor_tls_cert_matches_key()` when Tor is compiled to use Mozilla's NSS
instead of OpenSSL.
The NSS library stores some length fields in bits instead of bytes, but
the comparison function found in `SECITEM_ItemsAreEqual()` needs the
length to be encoded in bytes. This means that for a 140-byte,
DER-encoded, SubjectPublicKeyInfo struct (with a 1024-bit RSA public key
in it), we would ask `SECITEM_ItemsAreEqual()` to compare the first 1120
bytes instead of 140 (140bytes * 8bits = 1120bits).
This patch fixes the issue by converting from bits to bytes before
calling `SECITEM_ItemsAreEqual()` and convert the `len`-fields back to
bits before we leave the function.
This patch is part of the fix for TROVE-2020-001.
See: https://bugs.torproject.org/33119
This patch lifts the `tor_tls_cert_matches_key()` tests out of the
OpenSSL specific TLS test suite and moves it into the generic TLS test
suite that is executed for both OpenSSL and NSS.
This patch is largely a code movement, but we had to rewrite parts of
the test to avoid using OpenSSL specific data-types (such as `X509 *`)
and replace it with the generic Tor abstraction type
(`tor_x509_cert_impl_t *`).
This patch is part of the fix for TROVE-2020-001.
See: https://bugs.torproject.org/33119
If at least one service is configured as a version 2, a log warning is emitted
once and only once.
Closes#40003
Signed-off-by: David Goulet <dgoulet@torproject.org>
We don't need to log that we're about to look for a channel for a
given extend_info_t, since we're either going to log that we're
launching one (at info), or that we're using an existing one (at
debug).
In practice, there will be at most one ipv4 address and ipv6 address
for now, but this code is designed to not care which address is
which until forced to do so.
This patch does not yet actually create extend_info_t objects with
multiple addresses.
Closes#34069.
The find_my_address() function now prioritize the local interface over the
local hostname when guessing the IP address.
See proposal 312, section 3.2.1, general case:
https://gitweb.torproject.org/torspec.git/tree/proposals/312-relay-auto-ipv6-addr.txt#n359
The entire unit tests had to be refactored to make this possible. Instead of
hot patching it, it has been rewritten to cover all possible cases and the
test interface has been changed to accomodate both IPv4 and IPv6 in order for
them to be tested identically.
Closes#33238
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now instead of saying "DONE, DONE" or "MISC, MISC" or "TLS_ERROR,
TLS_ERROR", we can finally give a nice sensible "TLS_ERROR,
wrong version number" which should help debug a great deal.
Closes ticket 32622.
These tests don't actually exercise the authority IPv6 ORPort
self-add feature in 32822, but they do improve coverage of the
related config code.
Part of 32822.
Authorities currently add themselves to the trusted dir servers list,
but if they have an IPv6 ORPort, they leave it out.
This commit makes authorities add their own IPv6 ORPort to the trusted
dir servers list.
Closes ticket 32822.
The exposed interface is "stats/" thus make the unit tests clear that it is
testing that specific GETINFO command.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is in response to a question about why we don't always log
orport self-tests as reachability tests.
I'm not 100% convinced that bandwidth self-tests are still useful,
but that's an issue for another day. :)
This function is about learning if a given address is local to us as in the
resolved address as a relay.
Closes#40009
Signed-off-by: David Goulet <dgoulet@torproject.org>
New name reflects that the function is only used to compare router addresses
in order to learn if they are in the same network.
The network check is /16 and /32 respectively for IPv4 and IPv6.
Related to #40009
Signed-off-by: David Goulet <dgoulet@torproject.org>
If at least one Address line is given but invalid, we should not attempt to
guess our address.
This commit sends back the "bail" signal so find_my_address() can return an
error if the requested family doesn't exists but still an Address line is
found which is likely another family.
Fixed in #33235
Related to #33233
Signed-off-by: David Goulet <dgoulet@torproject.org>
When going over all Address lines from the configuration, continue to attempt
resolving other lines if one fails.
Before that, we would bail right away and never noticed the other Address
lines.
Fixed in #33235
Related to #33233
Signed-off-by: David Goulet <dgoulet@torproject.org>
In get_address_from_config(), we would attempt to resolve an Address line that
is not from the requested family but that line could be a valid address from
another family (v4 vs v6).
This makes it that we don't attempt to resolve a valid address from another
family.
Found with unit test config/find_my_address_mixed.
Fixed in #33235
Related to #33233
Signed-off-by: David Goulet <dgoulet@torproject.org>
This unit tests validates the use of IPv4 _and_ IPv6 together as in multiple
option Address lines both addresses and hostnames.
Closes#33235
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is not actually a bug! It can happen for a bunch of reasons,
which all boil down to "trying to add an extrainfo for which we no
longer have the corresponding routerinfo".
Fixes#16016; bugfix on 0.2.6.3-alpha.
Previously we had two chains of logic for reachability tests: one
for launching them, and one for telling the user that we had
launched them. Now, we simply have the launch code inform the user:
this way, we can't get out of sync.
Closes ticket 34137.
If our TLS connection fails for a "misc" reason, we don't need to
say that the reason is "misc" -- we can at least localize it to
the TLS module.
Part of a fix for #32622.
Previously, we would only update this field when the error happened
during a read.
This will improves our reporting for our bootstrap status, and help
to address #32622. The problem is not completely solved by this
patch, however: too many errors are still lumped into "MISC".
AssumeReachable should only be about whether a relay thinks that it
is reachable itself. But previously, we've had it also turn off
reachability checking of _other_ relays on authorities.
(Technically, reachability tests were still run, but we would ignore
the results.)
With this patch, there is a new AuthDirTestReachability option
(default 1) that controls whether authorities run reachability
tests.
Making this change allows us to have test networks where authorities
set AssumeReachable without disabling their reachability testing
entirely.
Closes ticket #34445.
These parameters do not suppress checks, but they tell relays that
it's okay to publish even when those checks fail.
I have chosen lowercase hyphenated names, since these seem to be
more common in networkstatus params.
Closes#33224 and part of #34064.
This was supposed to happen in #40012, but the command line was wrong.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
router_should_skip_orport_reachability_check router_all_orports_seem_reachable
Instead of a complex if/else block, use a table of functions that have the
same interface and each of them attempt to find the address one after the
other.
Pointed out by nickm's during review.
Signed-off-by: David Goulet <dgoulet@torproject.org>
