The client addr is essentially meaningless in this context (yes, it is
possible to explicitly `bind()` AF_LOCAL client side sockets to a path,
but no one does it, and there are better ways to grant that sort of
feature if people want it like using `SO_PASSCRED`).
Parse the value to UseEntryNodes_option, then set UseEntryNodes before
validating options.
This way, Authorities, Tor2web, and Single Onion Services don't write
spurious "UseEntryNodes 0" lines to their configs. Document the fact that
these tor configurations ignore UseEntryNodes in the manual page.
Also reorder options validation so we modify UseEntryNodes first, then
check its value against EntryNodes.
And silence a warning about disabled UseEntryNodes for hidden services
when we're actually in non-anonymous single onion service mode.
Add experimental OnionServiceSingleHopMode and
OnionServiceNonAnonymousMode options. When both are set to 1, every
hidden service on a tor instance becomes a non-anonymous Single Onion
Service. Single Onions make one-hop (direct) connections to their
introduction and renzedvous points. One-hop circuits make Single Onion
servers easily locatable, but clients remain location-anonymous.
This is compatible with the existing hidden service implementation, and
works on the current tor network without any changes to older relays or
clients.
Implements proposal #260, completes ticket #17178. Patch by teor & asn.
squash! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! Implement Prop #260: Single Onion Services
Redesign single onion service poisoning.
When in OnionServiceSingleHopMode, each hidden service key is poisoned
(marked as non-anonymous) on creation by creating a poison file in the
hidden service directory.
Existing keys are considered non-anonymous if this file exists, and
anonymous if it does not.
Tor refuses to launch in OnionServiceSingleHopMode if any existing keys
are anonymous. Similarly, it refuses to launch in anonymous client mode
if any existing keys are non-anonymous.
Rewrite the unit tests to match and be more comprehensive.
Adds a bonus unit test for rend_service_load_all_keys().
... when the directory authorities don't set min_paths_for_circs_pct.
Fixes bug 20117; bugfix on 02c320916e in tor-0.2.4.10-alpha.
Reported by Jesse V.
OnionTrafficOnly is equivalent to NoDNSRequest, NoIPv4Traffic,
and NoIPv6Traffic.
Add unit tests for parsing and checking option validity.
Add documentation for each flag to the man page.
Add changes file for all of #18693.
Parsing only: the flags do not change client behaviour (yet!)
Rely on onion_populate_cpath to check that we're only using
TAP for the rare hidden service cases.
Check and log if handshakes only support TAP when they should support
ntor.
asciidoc adds a timestamp at the end of a generated HTML file.
This timestamp is based on the date of the file but it can change
depending on the TZ environment variable.
This commit adds the commit(s) line in the vote as well as the SR values. It
also has the mechanism to add the majority SRVs in the consensus.
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Signed-off-by: David Goulet <dgoulet@torproject.org>
From 0.2.7.2-alpha onwards, Exits would reject all the IP addresses
they knew about in their exit policy. But this may have disclosed
addresses that were otherwise unlisted.
Now, only advertised addresses are rejected by default by
ExitPolicyRejectPrivate. All known addresses are only rejected when
ExitPolicyRejectLocalInterfaces is explicitly set to 1.
Document this convention.
Add a script to post-process .gcov files in order to stop nagging us
about excluded lines.
Teach cov-diff to handle these post-processed files.
Closes ticket 16792
This changes simply renames them by removing "Testing" in front of them and
they do not require TestingTorNetwork to be enabled anymore.
Fixes#18481
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Regardless of the setting of ExtendAllowPrivateAddresses.
This fixes a bug with pluggable transports that ignore the
(potentially private) address in their bridge line.
Fixes bug 18517; bugfix on 23b088907f in tor-0.2.8.1-alpha.
When ClientPreferIPv6ORPort is auto, bridges prefer the configured
bridge ORPort address. Otherwise, they use the value of the option.
Other clients prefer IPv4 ORPorts if ClientPreferIPv6ORPort is auto.
When ClientPreferIPv6DirPort is auto, all clients prefer IPv4 DirPorts.
Bridge clients ignore ClientUseIPv6, acting as if it is always 1.
This preserves existing behaviour.
Make ClientPreferIPv6OR/DirPort auto by default:
* Bridge clients prefer IPv6 by default.
* Other clients prefer IPv4 by default.
This preserves existing behaviour.
ClientUseIPv4 0 tells tor to avoid IPv4 client connections.
ClientPreferIPv6DirPort 1 tells tor to prefer IPv6 directory connections.
Refactor policy for IPv4/IPv6 preferences.
Fix a bug where node->ipv6_preferred could become stale if
ClientPreferIPv6ORPort was changed after the consensus was loaded.
Update documentation, existing code, add unit tests.
Fixes bug 17924; bugfix on 0.2.4.1-alpha.
In ddf5020ea8, we added config.log to CLEANFILES in doc/Makefile.am
so that distcheck would be happy about the presence of doc/config.log.
But when we moved to nonrecursie makefiles in 2a4a149624, we
accidentally left that filename unchanged, so that it referred to
config.log instead.
Patch from cypherpunks.
This will give relay operators the ability of disabling the caching of
directory data. In general, this should not be necessary, but on some
lower-resource systems it may beneficial.
* The option is now KeepBindCapabilities
* We now warn if the user specifically asked for KeepBindCapabilities
and we can't deliver.
* The unit tests are willing to start.
* Fewer unused-variable warnings.
* More documentation, fewer misspellings.
Once tor is downloading a usable consensus, any other connection
attempts are not needed.
Choose a connection to keep, favouring:
* fallback directories over authorities,
* connections initiated earlier over later connections
Close all other connections downloading a consensus.
Prop210: Add attempt-based connection schedules
Existing tor schedules increment the schedule position on failure,
then retry the connection after the scheduled time.
To make multiple simultaneous connections, we need to increment the
schedule position when making each attempt, then retry a (potentially
simultaneous) connection after the scheduled time.
(Also change find_dl_schedule_and_len to find_dl_schedule, as it no
longer takes or returns len.)
Prop210: Add multiple simultaneous consensus downloads for clients
Make connections on TestingClientBootstrapConsensus*DownloadSchedule,
incrementing the schedule each time the client attempts to connect.
Check if the number of downloads is less than
TestingClientBootstrapConsensusMaxInProgressTries before trying any
more connections.
UseDefaultFallbackDirs enables any hard-coded fallback
directory mirrors. Default is 1, set it to 0 to disable fallbacks.
Implements ticket 17576.
Patch by "teor".
Refuse connection requests to private OR addresses unless
ExtendAllowPrivateAddresses is set. Previously, tor would
connect, then refuse to send any cells to a private address.
Fixes bugs 17674 and 8976; bugfix on b7c172c9ec (28 Aug 2012)
Original bug 6710, released in 0.2.3.21-rc and an 0.2.2 maint
release.
Patch by "teor".
The slop testing options are the only spot where we try to enumerate multiple
options on the same line. Changing them to each be on their own line as we do
elsewhere.
When applying changes from proposal 171 Nick renamed SocksPort to SOCKSPort,
and SocksListenAddress to SOCKSListenAddress...
https://gitweb.torproject.org/tor.git/commit/?id=891ccd3cd0690e83f1dc4dde7698c3bd9d7fe98d
However, this didn't change the option itself in tor (it's still SocksPort),
and wasn't even uniform in the man page. Functionally this doesn't matter
(tor's config options are case insensitive) but this is a pretty clear
regression.
When logging to syslog, allow a tag to be added to the syslog identity
("Tor"), i.e. the string prepended to every log message. The tag can be
configured by setting SyslogIdentityTag and defaults to none. Setting
it to "foo" will cause logs to be tagged as "Tor-foo". Closes: #17194.
Update the definition of the private exit policy in the man page
and torrcs. It didn't get merged correctly into the man page, and
it was incomplete in the torrcs. (Unfortunately, we only reject the
primary configured IPv4 and IPv6 addresses, not all configured IPv4
and IPv6 addresses.)
Also fixup msn page formatting errors from changes in tickets 16069
and 17027, mainly unescaped *s.
Advise users how to configure separate IPv4 and IPv6 exit
policies in the manpage and sample torrcs.
Related to fixes in ticket #16069 and #17027. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
src/test/test_policy.c:
Merged calls to policies_parse_exit_policy by adding additional arguments.
fixup to remaining instance of ~EXIT_POLICY_IPV6_ENABLED.
Compacting logic test now produces previous list length of 4, corrected this.
src/config/torrc.sample.in:
src/config/torrc.minimal.in-staging:
Merged torrc modification dates in favour of latest.
ExitPolicyRejectPrivate now rejects more local addresses by default:
* the relay's published IPv6 address (if any), and
* any publicly routable IPv4 or IPv6 addresses on any local interfaces.
This resolves a security issue for IPv6 Exits and multihomed Exits that
trust connections originating from localhost.
Resolves ticket 17027. Patch by "teor".
Patch on 42b8fb5a15 (11 Nov 2007), released in 0.2.0.11-alpha.
In previous versions of Tor, ExitPolicy accept6/reject6 * produced
policy entries for IPv4 and IPv6 wildcard addresses.
To reduce operator confusion, change accept6/reject6 * to only produce
an IPv6 wildcard address.
Resolves bug #16069.
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
This controls the circuit dirtyness reset behavior added for Tor
Browser's user experience fix (#15482). Unlike previous iterations
of this patch, the tunable actually works, and is documented.
When this is set, and Tor is running as a relay, it will not
generate or load its secret identity key. You can manage the secret
identity key with --keygen. Implements ticket 16944.
"option to prevent guard,exit,hsdir flag assignment"
"A node will never receive the corresponding flag unless
that node is specified in the
TestingDirAuthVote{Exit,Guard,HSDir} list, regardless of
its uptime, bandwidth, exit policy, or DirPort".
Patch modified by "teor": VoteOnHidServDirectoriesV2
is now obsolete, so TestingDirAuthVoteHSDir always
votes on HSDirs.
Closes ticket 14882. Patch by "robgjansen".
Commit message and changes file by "teor"
with quotes from "robgjansen".
Fix an error in the manual page and comments for
TestingDirAuthVoteHSDir, which suggested that a
HSDir required "ORPort connectivity". While this is true,
it is in no way unique to the HSDir flag. Of all the flags,
only HSDirs need a DirPort configured in order for the
authorities to assign that particular flag.
Fixed as part of 14882. Patch by "teor".
Bugfix on 0.2.6.3 (f9d57473e1 on 10 January 2015).
This is a way to specify the amount of introduction points an hidden service
can have. Maximum value is 10 and the default is 3.
Fixes#4862
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Document use of coverity, clang static analyzer, and clang dynamic
undefined behavior and address sanitizers in doc/HACKING.
Add clang dynamic sanitizer blacklist in
contrib/clang/sanitizer_blacklist.txt to exempt known undefined
behavior. Include detailed usage instructions in this blacklist file.
Patch by "teor".
When set, this limits the maximum number of simultaneous streams per
rendezvous circuit on the server side of a HS, with further RELAY_BEGIN
cells being silently ignored.
This can be modified via "HiddenServiceMaxStreamsCloseCircuit", which
if set will cause offending rendezvous circuits to be torn down instead.
Addresses part of #16052.
Additional fixes to make the change work;
- fix Python 2 vs 3 issues
- fix some PEP 8 warnings
- handle paths with numbers correctly
- mention the make rule in doc/HACKING.
Parse the file just before voting and apply its information to the
provided vote_routerstatus_t. This follows the same logic as when
dirauths parse bwauth files.
This incidentally makes unix SocksSocket support all the same options
as SocksPort.
This patch breaks 'SocksSocket 0'; next will restore it.
Resolves 14254.
TestingDirAuthVoteHSDir ensures that authorities vote the HSDir flag
for the listed relays regardless of uptime or ORPort connectivity.
Respects the value of VoteOnHidServDirectoriesV2.
Partial fix for bug 14067.
If we're not a relay, we ignore it.
If it's set to 1, we obey ExitPolicy.
If it's set to 0, we force ExitPolicy to 'reject *:*'
And if it's set to auto, then we warn the user if they're running an
exit, and tell them how they can stop running an exit if they didn't
mean to do that.
Fixes ticket 10067
This allows hidden services to disable the anti-scanning feature
introduced in 0.2.6.2-alpha. With this option not set, a connection
to an unlisted port closes the circuit. With this option set, only
a RELAY_DONE cell is sent.
Closes ticket #14084.
The two statistics are:
1. number of RELAY cells observed on successfully established
rendezvous circuits; and
2. number of .onion addresses observed as hidden-service
directory.
Both statistics are accumulated over 24 hours, obfuscated by rounding
up to the next multiple of a given number and adding random noise,
and written to local file stats/hidserv-stats.
Notably, no statistics will be gathered on clients or services, but
only on relays.
Authorities are no longer voting on Named, so specifying nodes by
nickname isn't a clever thing to do. (Not that it ever was!) So
remove the documentation that suggests that you should do it.
Additionally, add proper cross-references to our __node__ lists, and
explain about the optional $ before identity digests.
Also, the oxford comma: endorsed by Steven Pinker, my spouse, and my
11th grade English teacher.
Closes 13381.
Add the TestingDirAuthVoteExit option, a list of nodes to vote Exit for,
regardless of their uptime, bandwidth, or exit policy.
TestingTorNetwork must be set for this option to have any effect.
Works around an issue where authorities would take up to 35 minutes to
give nodes the Exit flag in a test network, despite short consensus
intervals. Partially implements ticket 13161.
This implements the meat of #12899. This commit should simply remove the
parts of Tor dirauths used to check whether a relay was supposed to be
named or not, it doesn't yet convert to a new mechanism for
reject/invalid/baddir/badexiting relays.
This is in preparation for a big patch series removing the entire Naming
system from Tor. In its wake, the approved-routers file is being
deprecated, and a replacement option to allow only pre-approved routers
is not being implemented.
When we merged the cookieauthfile creation logic in 33c3e60a37, we
accidentally took out this feature. Fixes bug 12864, bugfix on
0.2.5.1-alpha.
Also adds an ExtORPortCookieAuthFileGroupReadable, since there's no
reason not to.
I don't know whether we missed these or misclassified them when we
first made the "DIRECTORY AUTHORITY SERVER OPTIONS" section, but they
really belong there.
If we can't detect the physical memory, the new default is 8 GB on
64-bit architectures, and 1 GB on 32-bit architectures.
If we *can* detect the physical memory, the new default is
CLAMP(256 MB, phys_mem * 0.75, MAX_DFLT)
where MAX_DFLT is 8 GB on 64-bit architectures and 2 GB on 32-bit
architectures.
You can still override the default by hand. The logic here is simply
trying to choose a lower default value on systems with less than 12 GB
of physical RAM.
This means that tor can run without needing to communicate with ioctls
to the firewall, and therefore doesn't need to run with privileges to
open the /dev/pf device node.
A new TransProxyType is added for this purpose, "pf-divert"; if the user
specifies this TransProxyType in their torrc, then the pf device node is
never opened and the connection destination is determined with getsockname
(as per pf(4)). The default behaviour (ie., when TransProxyType is "default"
when using the pf firewall) is still to assume that pf is configured with
rdr-to rules.
This isn't on by default; to get it, you need to set "TransProxyType
ipfw". (The original patch had automatic detection for whether
/dev/pf is present and openable, but that seems marginally fragile.)
We are searching @CONFDIR@ before $HOME, but the documentation
implied otherwise.
I screwed this up in f5e86bcd6c, when I
first documented the $HOME/.torrc possibility.
Fix for bug 9213; bugfix on 0.2.3.18-rc.
The build was broken by changes in f8c45339f7, but we didn't
notice, since that commit also made torify.1 only get built when
tor-fw-helper was turned on.
Fixes bug 11321; bugfix on Tor 0.2.5.1-alpha.
In the end this required a slightly nasty hack using a dummy anchor as
an option heading in order to make the "Other recognized __flags__"
line indent properly.
Fixes bug 11061; Bugfix on 61d740ed.
We have ignored any ports listed here since 80365b989 (0.0.7rc1),
but we didn't warn the user that we were ignoring them. This patch
adds a warning if you put explicit ports in any of the options
{Socks,Dir}Policy or AuthDir{Reject,Invalid,BadDir,BadExit}. It
also adjusts the manpage to say that ports are ignored.
Fixes ticket 11108.
These options were added back in 0.1.2.5-alpha, but no longer make any
sense now that all directories support tunneled connections and
BEGIN_DIR cells. These options were on by default; now they are
always-on.
This is a fix for 10849, where TunnelDirConns 0 would break hidden
services -- and that bug arrived, I think, in 0.2.0.10-alpha.
(There is no longer meaningfully any such thing as a HS authority,
since we stopped uploading or downloading v0 hs descriptors in
0.2.2.1-alpha.)
Implements #10881, and part of #10841.
Explicitly include bridges, and note that we archive and publish all
descriptors.
(We are not yet publishing ContactInfo lines contained in bridge
descriptors, but maybe we'll want to do that soon, so let's err on the
side of caution here.)
Related to #9854.
According to the manpage, bridges use P256 for conformity and relays
use P224 for speed. But skruffy points out that we've gotten it
backwards in the code.
In this patch, we make the default P256 for everybody.
Fixes bug 9780; bugfix on 0.2.4.8-alpha.
For now, round down to the nearest 10 minutes. Later, eliminate entirely by
setting a consensus parameter.
(This rounding is safe because, in 0.2.2, where the timestamp mattered,
REND_REPLAY_TIME_INTERVAL was a nice generous 60 minutes.)
This implements "algorithm 1" from my discussion of bug #9072: on OOM,
find the circuits with the longest queues, and kill them. It's also a
fix for #9063 -- without the side-effects of bug #9072.
The memory bounds aren't perfect here, and you need to be sure to
allow some slack for the rest of Tor's usage.
This isn't a perfect fix; the rest of the solutions I describe on
codeable.
doc/TODO and doc/spec/README were placeholders to tell people where to
look for the real TODO and README stuff -- we replaced them years ago,
though.
authority-policy, v3-authority-howto, and torel-design.txt belong in
torspec. I'm putting them in attic there since I think they may be in
large part obsolete, but someone can rescue them if they're not.
translations.txt is outdated, and refers to lots of programs other
than Tor. We have much better translation resources on the website
now.
tor-win32-mingw-creation.txt is pending review of a revised version
for 0.2.5 (see ticket #4520), but there's no reason to ship this one
while we're waiting for an accurate version.
the tor-rpm-creation.txt isn't obsolete AFAIK, but it belongs in
doc/contrib if anywhere.
Resolves bug #8965.
A new option TestingV3AuthVotingStartOffset is added which offsets the
starting time of the voting interval. This is possible only when
TestingTorNetwork is set.
This patch makes run_scheduled_events() check for new consensus
downloads every second when TestingTorNetwork, instead of every
minute. This should be fine, see #8532 for reasoning.
This patch also brings MIN_VOTE_SECONDS and MIN_DIST_SECONDS down from
20 to 2 seconds, unconditionally. This makes sanity checking of
misconfiguration slightly less sane.
Addresses #8532.
- Avoid control_event_refill_global function with 13 arguments and
increase code reuse factor by moving more code from control.c to
connection.c.
- Avoid an unsafe uint32_t -> int cast.
- Add TestingEnableTbEmptyEvent option.
- Prepare functions for testing.
- Rename a few functions and improve documentation.
- Move cell_command_to_string from control.c to command.c.
- Use accessor for global_circuitlist instead of extern.
- Add a struct for cell statistics by command instead of six arrays.
- Split up control_event_circuit_cell_stats by using two helper functions.
- Add TestingEnableCellStatsEvent option.
- Prepare functions for testing.
- Rename a few variables and document a few things better.
Now the manpages no longer refer to tsocks or tsocks.conf, and we no
longer have or ship a tor-tsocks.conf. The only remaining instances
of "tsocks" in our repository are old ChangeLog and ReleaseNotes
entries, and the torify script saying that it doesn't support tsocks.
Fixes bug 8290.
Also, deprecate the torrc options for the scaling values. It's unlikely anyone
but developers will ever tweak them, even if we provided a single ratio value.
Instead of hardcoding the minimum fraction of possible paths to 0.6, we
take it from the user, and failing that from the consensus, and
failing that we fall back to 0.6.
This is ticket 7706, reported by "bugcatcher." The rationale here
is that if somebody says 'ExcludeNodes {tv}', then they probably
don't just want to block definitely Tuvaluan nodes: they also want
to block nodes that have unknown country, since for all they know
such nodes are also in Tuvalu.
This behavior is controlled by a new GeoIPExcludeUnknown autobool
option. With the default (auto) setting, we exclude ?? and A1 if
any country is excluded. If the option is 1, we add ?? and A1
unconditionally; if the option is 0, we never add them.
(Right now our geoip file doesn't actually seem to include A1: I'm
including it here in case it comes back.)
This feature only takes effect if you have a GeoIP file. Otherwise
you'd be excluding every node.
The right way to set "MaxOnionsPending" was to adjust it until the
processing delay was appropriate. So instead, let's measure how long
it takes to process onionskins (sampling them once we have a big
number), and then limit the queue based on its expected time to
finish.
This change is extra-necessary for ntor, since there is no longer a
reasonable way to set MaxOnionsPending without knowing what mix of
onionskins you'll get.
This patch also reserves 1/3 of the onionskin spots for ntor
handshakes, on the theory that TAP handshakes shouldn't be allowed to
starve their speedier cousins. We can change this later if need be.
Resolves 7291.
With an IPv6 virtual address map, we can basically hand out a new
IPv6 address for _every_ address we connect to. That'll be cool, and
will let us maybe get around prop205 issues.
This uses some fancy logic to try to make the code paths in the ipv4
and the ipv6 case as close as possible, and moves to randomly
generated addresses so we don't need to maintain those stupid counters
that will collide if Tor restarts but apps don't.
Also has some XXXX items to fix to make this useful. More design
needed.
This replaces the old FallbackConsensus notion, and should provide a
way -- assuming we pick reasonable nodes! -- to give clients
suggestions of placs to go to get their first consensus.
See #4771 for rationale.
Note that this patch does not take suggested changes in #4470 into
account and keeps treating AuthDirHasIPv6Connectivity as an
AUTOBOOL. Thus, bug fixes for that are included here as well.
This is a fix on master, unreleased as of now.
Add ClientUseIPv6 and ClientPreferIPv6ORPort configuration options.
Use "preferred OR port" for all entry nodes, not only for bridges.
Mark bridges with "prefer IPv6 OR port" if an IPv6 address is
configured in Bridge line and ClientPreferIPv6ORPort is set.
Mark relays with "prefer IPv6 OR port" if an IPv6 address is found in
descriptor and ClientPreferIPv6ORPort is set.
Filter "preferred OR port" through the ClientUseIPv6 config option. We
might want to move this test to where actual connection is being set
up once we have a fall back mechanism in place.
Have only non-servers pick an IPv6 address for the first hop: We
don't want relays to connect over IPv6 yet. (IPv6 has never been used
for second or third hops.)
Implements ticket 5535.
This is important, since otherwise an attacker can use timing info
to probe the internal network.
Also, add an option (ExtendAllowPrivateAddresses) so that
TestingTorNetwork won't break.
Fix for bug 6710; bugfix on all released versions of Tor.
This gives us a few benefits:
1) make -j clean all
this will start working, as it should. It currently doesn't.
2) increased parallel build
recursive make will max out at number of files in a directory,
non-recursive make doesn't have such a limitation
3) Removal of duplicate information in make files,
less error prone
I've also slightly updated how we call AM_INIT_AUTOMAKE, as the way
that was used was not only deprecated but will be *removed* in the next
major automake release (1.13).... so probably best that we can continue
to bulid tor without requiring old automake.
(see http://www.gnu.org/software/automake/manual/html_node/Public-Macros.html )
For more reasons why, see resources such as:
http://miller.emu.id.au/pmiller/books/rmch/
This makes the V=1 or V=0 automake silent build options display (or hide)
the full command line used.
GEN foo.bar
will be seen rather than the full command.
As with all automake silent rules, "make V=1" will output the full command.
This is based on a pair of patches from A. Costa. I couldn't apply
those directly, since they changed the generated *roff files, not
the asciidoc source.
Fixes Tor bug 6500 and Debian bug 683359.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
The defense counts the circuit failure rate for each guard for the past N
circuits. Failure is defined as the ability to complete a first hop, but not
finish completing the circuit all the way to the exit.
If the failure rate exceeds a certain amount, a notice is emitted.
If it exceeds a greater amount, a warn is emitted and the guard is disabled.
These values are governed by consensus parameters which we intend to tune as
we perform experiments and statistical simulations.
Nearly everywhere, we end options with "(Default: foo)". But in a
few places, we inserted an extra period after or before the close
parenthesis, and in a few other places we said "(Defaults to foo)".
Let's not do that.
This feature can make Tor relays less identifiable by their use of the
mod_ssl DH group, but at the cost of some usability (#4721) and bridge
tracing (#6087) regressions.
We should try to turn this on by default again if we find that the
mod_ssl group is uncommon and/or we move to a different DH group size
(see #6088). Before we can do so, we need a fix for bugs #6087 and
Resolves ticket #5598 for now.
make the asciidoc work; make the example more generic; tighten the
prose a little; be more specific that *.example.com matches
example.com; simplify an example.
1. Only allow '*.' in MapAddress expressions. Ignore '*ample.com' and '.example.com'.
This has resulted in a slight refactoring of config_register_addressmaps.
2. Add some more detail to the man page entry for AddressMap.
3. Fix initialization of a pointer to NULL rather than 0.
4. Update the unit tests to cater for the changes in 1 and test more explicitly for
recursive mapping.
1. Implement the following mapping rules:
MapAddress a.b.c d.e.f # This is what we have now
MapAddress .a.b.c d.e.f # Replaces any address ending with .a.b.c with d.e.f
MapAddress .a.b.c .d.e.f # Replaces the .a.b.c at the end of any addr with .d.e.f
(Note that 'a.b.c .d.e.f' is invalid, and will be rejected.)
2. Add tests for the new rules.
3. Allow proper wildcard annotation, i.e. '*.d.e' '.d.e' will still work.
4. Update addressmap_entry_t with an is_wildcard member.
If set to 1, Tor will attempt to prevent basic debugging
attachment attempts by other processes. (Default: 1)
Supports Mac OS X and Gnu/Linux.
Sebastian provided useful feedback and refactoring suggestions.
Signed-off-by: Jacob Appelbaum <jacob@appelbaum.net>
When running a system-wide instance of Tor on Unix-like systems, having
a ControlSocket is a quite handy mechanism to access Tor control
channel. But it would be easier if access to the Unix domain socket can
be granted by making control users members of the group running the Tor
process.
This change introduces a UnixSocketsGroupWritable option, which will
create Unix domain sockets (and thus ControlSocket) 'g+rw'. This allows
ControlSocket to offer same access control measures than
ControlPort+CookieAuthFileGroupReadable.
See <http://bugs.debian.org/552556> for more details.
Clients and relays haven't used them since early 0.2.0.x. The only
remaining use by authorities learning about new relays ahead of scedule;
see proposal 147 for what we intend to do about that.
We're leaving in an option (FetchV2Networkstatus) to manually fetch v2
networkstatuses, because apparently dnsel and maybe bwauth want them.
This fixes bug 3022.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
- Document it in the manpage
- Add a changes entry
- No need to log when it is set: we don't log for other options.
- Use doxygen to document the new flag.
- Test truth of C variables with "if (x)", not "if (x == 1)".
- Simplify a complex boolean expression by breaking it up.
Sets:
* Documentation
* Logging domain
* Configuration option
* Scheduled event
* Makefile
It also creates status.c and the log_heartbeat() function.
All code was written by Sebastian Hahn. Commit message was
written by me (George Kadianakis).
We detect and reject said attempts if there is no chosen exit node or
circuit: connecting to a private addr via a randomly chosen exit node
will usually fail (if all exits reject private addresses), is always
ill-defined (you're not asking for any particular host or service),
and usually an error (you've configured all requests to go over Tor
when you really wanted to configure all _remote_ requests to go over
Tor).
This can also help detect forwarding loop requests.
Found as part of bug2279.
Previously if you wanted to say "All messages except network
messages", you needed to say "[*,~net]" and if you said "[~net]" by
mistake, you would get no messages at all. Now, if you say "[~net]",
you get everything except networking messages.
We need to make sure that the worst thing that a weird consensus param
can do to us is to break our Tor (and only if the other Tors are
reliably broken in the same way) so that the majority of directory
authorities can't pull any attacks that are worse than the DoS that
they can trigger by simply shutting down.
One of these worse things was the cbtnummodes parameter, which could
lead to heap corruption on some systems if the value was sufficiently
large.
This commit fixes this particular issue and also introduces sanity
checking for all consensus parameters.
This was originally a patch provided by pipe
(http://www.mail-archive.com/or-talk@freehaven.net/msg13085.html) to
provide a method for controllers to query the total amount of traffic
tor has handled (this is a frequently requested piece of information
by relay operators).
The spec stated that support for the helper-nodes command would be removed
in 0.1.3.x, however support for this command is still in Tor. Updated the spec
to reflect this and added a node that the command is deprecated.
Several updates to grammars for events and GETINFO results. All relate
to the fact that LongName has replaced ServerID since 0.2.2.1-alpha. See
documentation of VERBOSE_NAMES for more information. The following
grammars were changed:
* orconn-status GETINFO result
* entry-guards GETINFO result
* Path general token
* OR Connection status changed event
* New descriptors available event
In all cases a note was added about when the old grammar applies.
(1) Made the wording of the comments consistant with token names.
Digest/Fingerprint and Name/Nickname were being used interchangeably.
Better to just use Fingerprint and Nickname becuase they are the names
of the tokens.
(2) Places the tokens currently in use before the tokens used in older
versions. ServerSpec should be documented before ServerID.
(3) Added a note to the comments about ServerID that cross reference
the VERBOSE_FEATURE, allowing users to see when and why ServerID was
replaced with LongName.
(1) On by default is a bad way to describe features. Rather, they
are always on and should be viewed as a part of the control
protocol. Updated the wording in USEFEATURE to reflect this.
(2) Made descriptions of Tor versions consistant across all
features. There is the version in which a feature was introduced and
the version in which it became part of the protocol.
(3) Reworded the description of the VERBOSE_NAMES feature. The
previous wording describes the way things used to be first. Better to
lead with the current state of things and then describe how it differs
from old versions.
Having very long single lines with lots and lots of things in them
tends to make files hard to diff and hard to merge. Since our tools
are one-line-at-a-time, we should try to construct lists that way too,
within reason.
This incidentally turned up a few headers in configure.in that we were
for some reason searching for twice.
We decided to no longer ship expert packages for OS X because they're a
lot of trouble to keep maintained and confuse users. For those who want
a tor on OS X without Vidalia, macports is a fine option. Alternatively,
building from source is easy, too.
The polipo stuff that is still required for the Vidalia bundle build can
now be found in the torbrowser repository,
git://git.torproject.org/torbrowser.git.
Instead of rejecting a value that doesn't divide into 1 second, round to
the nearest divisor of 1 second and warn.
Document that the option only controls the granularity written by Tor to a
file or console log. It does not (for example) "batch up" log messages to
affect times logged by a controller, times attached to syslog messages, or
the mtime fields on log files.
