When picking bridges (or other nodes without a consensus entry (and
thus no bandwidth weights)) we shouldn't just trust the node's
descriptor. So far we believed anything between 0 and 10MB/s, where 0
would mean that a node doesn't get any use from use unless it is our
only one, and 10MB/s would be a quite siginficant weight. To make this
situation better, we now believe weights in the range from 20kB/s to
100kB/s. This should allow new bridges to get use more quickly, and
means that it will be harder for bridges to see almost all our traffic.
In the first 100 circuits, our timeout_ms and close_ms
are the same. So we shouldn't transition circuits to purpose
CIRCUIT_PURPOSE_C_MEASURE_TIMEOUT, since they will just timeout again
next time we check.
We really should ignore any timeouts that have *no* network activity for their
entire measured lifetime, now that we have the 95th percentile measurement
changes. Usually this is up to a minute, even on fast connections.
If we really want all this complexity for these stages here, we need to handle
it better for people with large timeouts. It should probably go away, though.
Rechecking the timeout condition was foolish, because it is checked on the
same codepath. It was also wrong, because we didn't round.
Also, the liveness check itself should be <, and not <=, because we only have
1 second resolution.
Specifically, a circ attempt that we'd launched while the network was
down could timeout after we've marked our entrynodes up, marking them
back down again. The fix is to annotate as bad the OR conns that were
around before we did the retry, so if a circuit that's attached to them
times out we don't do anything about it.
We want to make sure that we don't break old torrc files that might have
used something like this made-up example:
ContactInfo UberUser <uber@user.com> # /// Fake email! \\\
Log info file /home/nick.mathewson/projects/tor-info.log
And we also want to support the following style of writing your torrc:
ExcludeNodes \
# Node1337 is run by the Bavarian Illuminati
Node1337, \
# The operator of Node99 looked at me funny
Node99
The code already handles both cases, but the unit test should help prove
it.
Roger correctly pointed out that my code was broken for accounting
periods that shifted forwards, since
start_of_accounting_period_containing(interval_start_time) would not
be equal to interval_start_time, but potentially much earlier.
This function uses GetSystemDirectory() to make sure we load the version
of the library from c:\windows\system32 (or local equivalent) rather than
whatever version lives in the cwd.
The RefuseUnknownExits config option is now a tristate, with "1"
meaning "enable it no matter what the consensus says", "0" meaning
"disable it no matter what the consensus says", and "auto" meaning "do
what the consensus says". If the consensus is silent, we enable
RefuseUnknownExits.
This patch also changes the dirserv logic so that refuseunknownexits
won't make us cache unless we're an exit.
Do not double-report signatures from unrecognized authorities both as
"from unknown authority" and "not present". Fixes bug 1956, bugfix on
0.2.2.16-alpha.
Our attempt to make compilation work on old versions of Windows
again while keeping wince compatibility broke the build for Win2k+.
helix reports this patch fixes the issue for WinXP. Bugfix on
0.2.2.15-alpha; related to bug 1797.
When the CellStatistics option is off, we don't store cell insertion
times. Doing so would also not be very smart, because there seem to
still be some performance issues with this type of statistics. Nothing
harmful happens when we don't have insertion times, so we don't need to
alarm the user.
Previously[*], the function would start with the first stream on the
circuit, and let it package as many cells as it wanted before
proceeding to the next stream in turn. If a circuit had many live
streams that all wanted to package data, the oldest would get
preference, and the newest would get ignored.
Now, we figure out how many cells we're willing to send per stream,
and try to allocate them fairly.
Roger diagnosed this in the comments for bug 1298.
[*] This bug has existed since before the first-ever public release
of Tor. It was added by r152 of Tor on 26 Jan 2003, which was
the first commit to implement streams (then called "topics").
This is not the oldest bug to be fixed in 0.2.2.x: that honor
goes to the windowing bug in r54, which got fixed in e50b7768 by
Roger with diagnosis by Karsten. This is, however, the most
long-lived bug to be fixed in 0.2.2.x: the r54 bug was fixed
2580 days after it was introduced, whereas I am writing this
commit message 2787 days after r152.
I'm going to use this to implement more fairness in
circuit_resume_edge_reading_helper in an attempt to fix bug 1298.
(Updated with fixes from arma and Sebastian)
An authority should never download a consensus if it has a live one,
but when it doesn't, it should admit that it's not going to get one,
and see if anybody else can give it one.
Fixes 1300, fix on 0.2.0.9-alpha
Bridges and other relays not included in the consensus don't
necessarily have a non-zero bandwidth capacity. If all our
configured bridges had a zero bw capacity we would warn the
user. Change that.
Previously, we were also considering the time spent in
soft-hibernation. If this was a long time, we would wind up
underestimating our bandwidth by a lot, and skewing our wakeup time
towards the start of the accounting interval.
This patch also makes us store a few more fields in the state file,
including the time at which we entered soft hibernation.
Fixes bug 1789. Bugfix on 0.0.9pre5.
This will make changes for DST still work, and avoid double-spending
bytes when there are slight changes to configurations.
Fixes bug 1511; the DST issue is a bugfix on 0.0.9pre5.
When we introduced the code to close non-open OR connections after
KeepalivePeriod had passed, we replaced some code that said
if (!connection_is_open(conn)) {
/* let it keep handshaking forever */
} else if (do other tests here) {
...
with new code that said
if (!connection_is_open(conn) && past_keepalive) {
/* let it keep handshaking forever */
} else if (do other tests here) {
...
This was a mistake, since it made all the other tests start applying
to non-open connections, thus causing bug 1840, where non-open
connections get closed way early.
Fixes bug 1840. Bugfix on 0.2.1.26 (commit 67b38d50).
- Move checks for extra_info to callers
- Change argument name from failed to descs
- Use strlen("fp/") instead of a magic number
- I passed on the suggestion to rename functions from *_failed() to
*_handle_failure(). There are a lot of these so for now just follow
the house style.
It's normal when bootstrapping to have a lot of different certs
missing, so we don't want missing certs to make us warn... unless
the certs we're missing are ones that we've tried to fetch a couple
of times and failed at.
May fix bug 1145.
We frequently add cells to stream-blocked queues for valid reasons
that don't mean we need to block streams. The most obvious reason
is if the cell arrives over a circuit rather than from an edge: we
don't block circuits, no matter how full queues get. The next most
obvious reason is that we allow CONNECTED cells from a newly created
stream to get delivered just fine.
This patch changes the behavior so that we only iterate over the
streams on a circuit when the cell in question came from a stream,
and we only block the stream that generated the cell, so that other
streams can still get their CONNECTEDs in.
This should keep WinCE working (unicode always-on) and get Win98
working again (unicode never-on).
There are two places where we explicitly use ASCII-only APIs, still:
in ntmain.c and in the unit tests.
This patch also fixes a bug in windoes tor_listdir that would cause
the first file to be listed an arbitrary number of times that was
also introduced with WinCE support.
Should fix bug 1797.
Setting CookieAuthFileGroupReadable but without setting CookieAuthFile makes
no sense, because unix directory permissions for the data directory prevent
the group from accessing the file anyways.
When this happens, run through the streams on the circuit and make
sure they're all blocked. If some aren't, that's a bug: block them
all and log it! If they all are, where did the cell come from? Log
it!
(I suspect that this actually happens pretty frequently, so I'm making
these log messages appear at INFO.)
Do not start reading on exit streams when we get a SENDME unless we
have space in the appropriate circuit's cell queue.
Draft fix for bug 1653.
(commit message by nickm)
router_add_to_routerlist() is supposed to be a nice minimal function
that only touches the routerlist structures, but it included a call to
dirserv_single_reachability_test().
We have a function that gets called _after_ adding descriptors
successfully: routerlist_descriptors_added. This patch moves the
responsibility for testing there.
Because the decision of whether to test or not depends on whether
there was an old routerinfo for this router or not, we have to first
detect whether we _will_ want to run the tests if the router is added.
We make this the job of
routers_update_status_from_consensus_networkstatus().
Finally, this patch makes the code notice if a router is going from
hibernating to non-hibernating, and if so causes a reachability test
to get launched.
This solves the problem Roger noted as:
What if the router has a clock that's 5 minutes off, so it
publishes a descriptor for 5 minutes in the future, and we test it
three minutes in. In this edge case, we will continue to advertise
it as Running for the full 45 minute period.
If the voting interval was short enough, the two-minutes delay
of CONSENSUS_MIN_SECONDS_BEFORE_CACHING would confuse bridges
to the point where they would assert before downloading a consensus.
It it was even shorter (<4 minutes, I think), caches would
assert too. This patch fixes that by having replacing the
two-minutes value with MIN(2 minutes, interval/16).
Bugfix for 1141; the cache bug could occur since 0.2.0.8-alpha, so
I'm calling this a bugfix on that. Robert Hogan diagnosed this.
Done as a patch against maint-0.2.1, since it makes it hard to
run some kinds of testing networks.
requests to authorities fail due to a network error.
Bug#1138
"When a Tor client starts up using a bridge, and UpdateBridgesFromAuthority
is set, Tor will go to the authority first and look up the bridge by
fingerprint. If the bridge authority is filtered, Tor will never notice that
the bridge authority lookup failed. So it will never fall back."
Add connection_dir_bridge_routerdesc_failed(), a function for unpacking
the bridge information from a failed request, and ensure
connection_dir_request_failed() calls it if the failed request
was for a bridge descriptor.
Test:
1. for ip in `grep -iR 'router ' cached-descriptors|cut -d ' ' -f 3`;
do sudo iptables -A OUTPUT -p tcp -d $ip -j DROP; done
2. remove all files from user tor directory
3. Put the following in torrc:
UseBridges 1
UpdateBridgesFromAuthority 1
Bridge 85.108.88.19:443 7E1B28DB47C175392A0E8E4A287C7CB8686575B7
4. Launch tor - it should fall back to downloading descriptors
directly from the bridge.
Initial patch reviewed and corrected by mingw-san.
Apparently the way we handled cleaning up temporary directories with
atexit() meant that when the child process exited, it would remove the
temporary directory, thus making other tests in the main process fail.
https://trac.torproject.org/projects/tor/ticket/1525
"The codepath taken by the control port "RESOLVE" command to create a
synthetic SOCKS resolve request isn't the same as the path taken by
a real SOCKS request from 'tor-resolve'.
This prevents controllers who set LeaveStreamsUnattached=1 from
being able to attach RESOLVE streams to circuits of their choosing."
Create a new function connection_ap_rewrite_and_attach_if_allowed()
and call that when Tor needs to attach a stream to a circuit but
needs to know if the controller permits it.
No tests added.
Since the rend code doesn't like the port to be 0, we shouldn't generate
the port by declaring crypto_rand_int(65536); instead we should
say crypto_rand_int(65535)+1.
Diagnosed by Matt Edman; fixes bug 1808.
With this patch we stop scheduling when we should write statistics using a
single timestamp in run_scheduled_events(). Instead, we remember when a
statistics interval starts separately for each statistic type in geoip.c
and rephist.c. Every time run_scheduled_events() tries to write stats to
disk, it learns when it should schedule the next such attempt.
This patch also enables all statistics to be stopped and restarted at a
later time.
This patch comes with a few refactorings, some of which were not easily
doable without the patch.
We already had the country code ?? indicating an unknown country, so all we
needed to do to make unknown countries excludable was to make the ?? code
discoverable.
It's okay to get (say) a SocksPort line in the torrc, and then a
SocksPort on the command line to override it, and then a SocksPort via
a controller to override *that*. But if there are two occurrences of
SocksPort in the torrc, or on the command line, or in a single SETCONF
command, then the user is likely confused. Our old code would not
help unconfuse the user, but would instead silently ignore all but
the last occurrence.
This patch changes the behavior so that if the some option is passed
more than once to any torrc, command line, or SETCONF (each of which
coincidentally corresponds to a call to config_assign()), and the
option is not a type that allows multiple occurrences (LINELIST or
LINELIST_X), then we can warn the user.
This closes trac entry 1384.
At best, this patch helps us avoid sending queued relayed cells that
would get ignored during the time between when a destroy cell is
sent and when the circuit is finally freed. At worst, it lets us
release some memory a little earlier than it would otherwise.
Fix for bug #1184. Bugfix on 0.2.0.1-alpha.
The next series of commits begins addressing the issue that we're
currently including the complete or.h file in all of our source files.
To change that, we're splitting function definitions into new header
files (one header file per source file).
Right now it says "552 internal error" because there's no way for
getinfo_helper_*() countries to specify an error message. This
patch changes the getinfo_helper_*() interface, and makes most of the
getinfo helpers give useful error messages in response to failures.
This should prevent recurrences of bug 1699, where a missing GeoIPFile
line in the torrc made GETINFO ip-to-county/* fail in a "not obvious
how to fix" way.
V3 authorities no longer decide not to vote on Guard+Exit. The bandwidth
weights should take care of this now.
Also, lower the max threshold for WFU to 0.98, to allow more nodes to become
guards.
This should make us conflict less with system files named "log.h".
Yes, we shouldn't have been conflicting with those anyway, but some
people's compilers act very oddly.
The actual change was done with one "git mv", by editing
Makefile.am, and running
find . -name '*.[ch]' | xargs perl -i -pe 'if (/^#include.*\Wlog.h/) {s/log.h/torlog.h/; }'
We now record large times as abandoned, to prevent a filter step from
happening and skewing our results.
Also, issue a warn for a rare case that can happen for funky values of Xm or
too many abandoned circuits. Can happen (very rarely) during unit tests, but
should not be possble during live operation, due to network liveness filters
and discard logic.
Many friendly operating systems have 64-bit times, and it's not nice
to pass them to an %ld format.
It's also extremely not-nice to write a time to the log as an
integer. Most people think it's 2010 June 29 23:57 UTC+epsilon, not
1277855805+epsilon.
These timers behave better with non-monotonic clocks than our old
ones, and also try harder to make once-per-second events get called
one second apart, rather than one-plus-epsilon seconds apart.
This fixes bug 943 for everybody using Libevent 2.0 or later.
From the code:
zlib 1.2.4 and 1.2.5 do some "clever" things with macros. Instead of
saying "(defined(FOO) ? FOO : 0)" they like to say "FOO-0", on the theory
that nobody will care if the compile outputs a no-such-identifier warning.
Sorry, but we like -Werror over here, so I guess we need to define these.
I hope that zlib 1.2.6 doesn't break these too.
Possible fix for bug 1526.
This should never happen unless openssl is buggy or some of our
assumptions are deeply wrong, but one of those might have been the
cause of the not-yet-reproducible bug 1209. If it ever happens again,
let's get some info we can use.
We need to ensure that we close timeout measurement circuits. While
we're at it, we should close really old circuits of certain types that
aren't in use, and log really old circuits of other types.
We need to record different statistics at point of timeout, vs the point
of forcible closing.
Also, give some better names to constants and state file variables
to indicate they are not dealing with timeouts, but abandoned circuits.
Having ~/.tor expand into /.tor is, after all, almost certainly not
what the user wanted, and it deserves a warning message.
Also, convert a guess-and-malloc-and-sprintf triple into an asprintf.
In rare cases, we could cannibalize a one-hop circuit, ending up
with a two-hop circuit. This circuit would not be actually used,
but we should prevent its creation in the first place.
Thanks to outofwords and swissknife for helping to analyse this.
Most of the changes here are switches to use APIs available on Windows
CE. The most pervasive change is that Windows CE only provides the
wide-character ("FooW") variants of most of the windows function, and
doesn't support the older ASCII verions at all.
This patch will require use of the wcecompat library to get working
versions of the posix-style fd-based file IO functions.
[commit message by nickm]
Back when we changed the idea of a connection being "too old" for new
circuits into the connection being "bad" for new circuits, we didn't
actually change the info messages. This led to telling the user that
we were labelling connections as "too old" for being worse than
connections that were actually older than them.
Found by Scott on or-talk.
There are now four ways that CBT can be disabled:
1. Network-wide, with the cbtdisabled consensus param.
2. Via config, with "LearnCircuitBuildTimeout 0"
3. Via config, with "AuthoritativeDirectory 1"
4. Via a state file write failure.
This should prevent some asserts and storage of incorrect build times
for the cases where Tor is suspended during a circuit construction, or
just after completing a circuit. The idea is that if the circuit
build time is much greater than we would have cut it off at, we probably
had a suspend event along this codepath, and we should discard the
value.
In case we decide that the timeout rate is now too high due to our
change of the max synthetic quantile value, this consensus parameter
will allow us to restore it to the previous value.
This is for the other issue we saw in Bug 1335. A large number of high
timeouts were causing the timeout calculation to slowly drift upwards,
especially in conditions of load. This fix repeatedly regenerates all of
our synthetic timeouts whenever the timeout changes, to try to prevent
drift.
It also lowers the timeout cap to help for some cases of Bug 1245, where
some timeout values were so large that we ended up allocating a ton of
scratch memory to count the histogram bins.
The downside is that lowering this cap is affecting our timeout rate.
Unfortunately, the buildtimeout quantile is now higher than the actual
completion rate by what appears to be about 7-10%, which probably
represents the skew in the distribution due to lowering this synthetic
cap.
In my state files, I was seeing several peaks, probably due to different
guards having different latency. This change is meant to better capture
this behavior and generate more reasonable timeouts when it happens. It
is improving the timeout values for my collection of state files.
what's happening here is that we're fetching certs for obsolete
authorities -- probably legacy signers in this case. but try to
remain general in the log message.
It's natural for the definition of bandwidth_rule_t to be with the functions
that actually care about its values. Unfortunately, this means declaring
bandwidth_rate_rule_to_string() out of sequence. Someday we'll just rename
reasons.c to strings.c, and put it at the end of or.h, and this will all be
better.
1) mingw doesn't have _vscprintf(); mingw instead has a working snprintf.
2) windows compilers that _do_ have a working _vscprintf spell it so; they do
not spell it _vcsprintf().
Works like the --enable-static-openssl/libevent options. Requires
--with-zlib-dir to be set. Note that other dependencies might still
pull in a dynamicly linked zlib, if you don't link them in statically
too.
Our code assumed that any version of OpenSSL before 0.9.8l could not
possibly require SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION. This is
so... except that many vendors have backported the flag from later
versions of openssl when they backported the RFC5476 renegotiation
feature.
The new behavior is particularly annoying to detect. Previously,
leaving SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION unset meant that
clients would fail to renegotiate. People noticed that one fast!
Now, OpenSSL's RFC5476 support means that clients will happily talk to
any servers there are, but servers won't accept renegotiation requests
from unpatched clients unless SSL_OP_ALLOW_etc is set. More fun:
servers send back a "no renegotiation for you!" error, which unpatched
clients respond to by stalling, and generally producing no useful
error message.
This might not be _the_ cause of bug 1346, but it is quite likely _a_
cause for bug 1346.
Everything that accepted the 'Circ' name handled it wrong, so even now
that we fixed the handling of the parameter, we wouldn't be able to
set it without making all the 0.2.2.7..0.2.2.10 relays act wonky.
This patch makes Tors accept the 'Circuit' name instead, so we can
turn on circuit priorities without confusing the versions that treated
the 'Circ' name as occasion to act weird.
I'm adding this because I can never remember what stuff like 'rule 3'
means. That's the one where if somebody goes limp or taps out, the
fight is over, right?
When you mean (a=b(c,d)) >= 0, you had better not say (a=b(c,d)>=0).
We did the latter, and so whenever CircPriorityHalflife was in the
consensus, it was treated as having a value of 1 msec (that is,
boolean true).
We need to make sure we have an event_base in dns.c before we call
anything that wants one. Make sure we always have one in dns_reset()
when we're a client. Fixes bug 1341.
Now if you're a published relay and you set RefuseUnknownExits, even
if your dirport is off, you'll fetch dir info from the authorities,
fetch it early, and cache it.
In the future, RefuseUnknownExits (or something like it) will be on
by default.
From http://archives.seul.org/tor/relays/Mar-2010/msg00006.html :
As I understand it, the bug should show up on relays that don't set
Address to an IP address (so they need to resolve their Address
line or their hostname to guess their IP address), and their
hostname or Address line fails to resolve -- at that point they'll
pick a random 4 bytes out of memory and call that their address. At
the same time, relays that *do* successfully resolve their address
will ignore the result, and only come up with a useful address if
their interface address happens to be a public IP address.
When the bandwidth-weights branch added the "directory-footer"
token, and began parsing the directory footer at the first
occurrence of "directory-footer", it made it possible to fool the
parsing algorithm into accepting unsigned data at the end of a
consensus or vote. This patch fixes that bug by treating the footer
as starting with the first "directory-footer" or the first
"directory-signature", whichever comes first.
Treat strings returned from signed_descriptor_get_body_impl() as not
NUL-terminated. Since the length of the strings is available, this is
not a big problem.
Discovered by rieo.
Don't allow anything but directory-signature tokens in a consensus after
the first directory-signature token. Fixes bug in bandwidth-weights branch.
Found by "outofwords."
Another dereference-then-NULL-check sequence. No reports of this bug
triggered in the wild. Fixes bugreport 1256.
Thanks to ekir for discovering and reporting this bug.
Fix a dereference-then-NULL-check sequence. This bug wasn't triggered
in the wild, but we should fix it anyways in case it ever happens.
Also make sure users get a note about this being a bug when they
see it in their log.
Thanks to ekir for discovering and reporting this bug.
We used to only zero the first ptrsize bytes of the cipher. Since
cipher is large enough, we didn't zero too many bytes. Discovered
and fixed by ekir. Fixes bug 1254.
This means that "if (E<G) {abc} else if (E>=G) {def}" can be replaced with
"if (E<G) {abc} else {def}"
Doing the second test explicitly made my mingw gcc nervous that we might
never be initializing casename.
For my 64-bit Linux system running with GCC 4.4.3-fc12-whatever, you
can't do 'printf("%lld", (int64_t)x);' Instead you need to tell the
compiler 'printf("%lld", (long long int)x);' or else it doesn't
believe the types match. This is why we added U64_PRINTF_ARG; it
looks like we needed an I64_PRINTF_ARG too.
asprintf() is a GNU extension that some BSDs have picked up: it does a printf
into a newly allocated chunk of RAM.
Our tor_asprintf() differs from standard asprintf() in that:
- Like our other malloc functions, it asserts on OOM.
- It works on windows.
- It always sets its return-field.
All other bandwidthrate settings are restricted to INT32_MAX, but
this check was forgotten for PerConnBWRate and PerConnBWBurst. Also
update the manpage to reflect the fact that specifying a bandwidth
in terabytes does not make sense, because that value will be too
large.
Fix a dereference-then-NULL-check sequence. This bug wasn't triggered
in the wild, but we should fix it anyways in case it ever happens.
Also make sure users get a note about this being a bug when they
see it in their log.
Thanks to ekir for discovering and reporting this bug.
On Windows, we don't have a notion of ~ meaning "our homedir", so we
were deliberately using an #ifdef to avoid calling expand_filename()
in multiple places. This is silly: The right place to turn a function
into a no-op on a single platform is in the function itself, not in
every single call-site.
We used to only zero the first ptrsize bytes of the cipher. Since
cipher is large enough, we didn't zero too many bytes. Discovered
and fixed by ekir. Fixes bug 1254.
Spec conformance issue: The code didn't force the network-status-version
token to be the first token in a v3 vote or consensus.
Problem discovered by Parakeep.
We need to use evdns_add_server_port_with_base() when configuring
our DNS listener, because libevent segfaults otherwise. Add a macro
in compat_libevent.h to pick the correct implementation depending
on the libevent version.
Fixes bug 1143, found by SwissTorExit
This time, set the SSL3_FLAGS_ALLOW_UNSAFE_RENEGOTIATION flag on every
version before OpenSSL 0.9.8l. I can confirm that the option value (0x0010)
wasn't reused until OpenSSL 1.0.0beta3.
The src and dest of a memcpy() call aren't supposed to overlap,
but we were sometimes calling tor_addr_copy() as a no-op.
Also, tor_addr_assign was a redundant copy of tor_addr_copy(); this patch
removes it.
We implemented ratelimiting for warnings going into the logfile, but didn't
rate-limit controller events. Now both log warnings and controller events
are rate-limited.
Tor has tor_lookup_hostname(), which prefers ipv4 addresses automatically.
Bug 1244 occured because gethostbyname() returned an ipv6 address, which
Tor cannot handle currently. Fixes bug 1244; bugfix on 0.0.2pre25.
Reported by Mike Mestnik.
The problem was that we didn't allocate enough memory on 32-bit
platforms with 64-bit time_t. The memory leak occured every time
we fetched a hidden service descriptor we've fetched before.
When calculating the is_exit flag for a routerinfo_t, we don't need
to call exit_policy_is_general_exit() if router_exit_policy_rejects_all()
tells us it definitely is an exit. This check is much cheaper than
running exit_policy_is_general_exit().
exit_policy_is_general_exit() assumed that there are no redundancies
in the passed policy, in the sense that we actively combine entries
in the policy to really get rid of any redundancy. Since we cannot
do that without massively rewriting the policy lines the relay
operators set, fix exit_policy_is_general_exit().
Fixes bug 1238, discovered by Martin Kowalczyk.
In brief: you mustn't use the SSL3_FLAG solution with anything but 0.9.8l,
and you mustn't use the SSL_OP solution with anything before 0.9.8m, and
you get in _real_ trouble if you try to set the flag in 1.0.0beta, since
they use it for something different.
For the ugly version, see my long comment in tortls.c
We need to do this because Apple doesn't update its dev-tools headers
when it updates its libraries in a security patch. On the bright
side, this might get us out of shipping a statically linked OpenSSL on
OSX.
May fix bug 1225.
[backported]
We need to do this because Apple doesn't update its dev-tools headers
when it updates its libraries in a security patch. On the bright
side, this might get us out of shipping a statically linked OpenSSL on
OSX.
May fix bug 1225.
We accidentally freed the internal buffer for bridge stats when we
were writing the bridge stats file or honoring a control port
request for said data. Change the interfaces for
geoip_get_bridge_stats* to prevent these problems, and remove the
offending free/add a tor_strdup.
Fixes bug 1208.
I believe that since we were allocating *cp while holding a mutex,
coverity deduced that *cp must be protected by that mutex, and later
flipped out when we didn't use it that way. If this is so, we can
solve our problems by moving the *cp = tor_strdup(buf) part outside of
the mutex-protected code.
It's a bit confusing to have a loop where another function,
confusingly named "*_free", is responsible for advancing the loop
variable (or rather, for altering a structure so that the next time
the loop variable's initializer is evaluated it evaluates to something
different.)
Not only has this confused people: it's also confused coverity scan.
Let's fix that.
This was freaking out some relay operators without good reason, as
it is nothing the relay operator can do anything about anyways.
Quieting this warning suggested by rieo.
We were checking for msg==NULL, but not lib or proc. This case can
only occur if we have an error whose string we somehow haven't loaded,
but it's worth coding defensively here.
Spotted by rieo on IRC.
The OutboundBindAddress option is useful for making sure that all of
your outbond connections use a given interface. But when connecting
to 127.0.0.1 (or ::1 even) it's important to actually have the
connection come _from_ localhost, since lots of programs running on
localhost use the source address to authenticate that the connection
is really coming from the same host.
Our old code always bound to OutboundBindAddress, whether connecting
to localhost or not. This would potentially break DNS servers on
localhost, and socks proxies on localhost. This patch changes the
behavior so that we only look at OutboundBindAddress when connecting
to a non-loopback address.
this case can now legitimately happen, if you have a cached v2 status
from moria1, and you run with the new list of dirservers that's missing
the old moria1. it's nothing to worry about; the file will die off in
a month or two.
