If you had TIME_MAX > INT_MAX, and your "time_to_exhaust_bw =
accountingmax/expected_bandwidth_usage * 60" calculation managed to
overflow INT_MAX, then your time_to_consider value could underflow and
wind up being rediculously low or high. "Low" was no problem;
negative values got caught by the (time_to_consider <= 0) check.
"High", however, would get you a wakeup time somewhere in the distant
future.
The fix is to check for time_to_exhaust_bw overflowing INT_MAX, not
TIME_MAX: We don't allow any accounting interval longer than a month,
so if time_to_exhaust_bw is significantly larger than 31*24*60*60, we
can just clip it.
This is a bugfix on 0.0.9pre6, when accounting was first introduced.
It fixes bug 2146, unless there are other causes there too. The fix
is from boboper. (I tweaked it slightly by removing an assignment
that boboper marked as dead, and lowering a variable that no longer
needed to be function-scoped.)
The old logic would have us fetch from authorities if we were refusing
unknown exits and our exit policy was reject*. Instead, we want to
fetch from authorities if we're refusing unknown exits and our exit
policy is _NOT_ reject*.
Fixed by boboper. Fixes more of 2097. Bugfix on 0.2.2.16-alpha.
We use a hash of the identity key to seed a prng to tell when an
accounting period should end. But thanks to the bug998 changes,
clients no longer have server-identity keys to use as a long-term seed
in accounting calculations. In any case, their identity keys (as used
in TLS) were never never fixed. So we can just set the wakeup time
from a random seed instead there. Still open is whether everybody
should be random.
This patch fixes bug 2235, which was introduced in 0.2.2.18-alpha.
Diagnosed with help from boboper on irc.
Doing so could make Libevent call Libevent from inside a Libevent
logging call, which is a recipe for reentrant confusion and
hard-to-debug crashes. This would especially hurt if Libevent
debug-level logging is enabled AND the user has a controller
watching for low-severity log messages.
Fix bug 2190; fix on 0.1.0.2-rc.
Doing so could make Libevent call Libevent from inside a Libevent
logging call, which is a recipe for reentrant confusion and
hard-to-debug crashes. This would especially hurt if Libevent
debug-level logging is enabled AND the user has a controller
watching for low-severity log messages.
Fix bug 2190; fix on 0.1.0.2-rc.
Pick 5 seconds as the limit. 5 seconds is a compromise here between
making sure the user notices that the bad behaviour is (still) happening
and not spamming their log too much needlessly (the log message is
pretty long). We also keep warning every time if safesocks is
specified, because then the user presumably wants to hear about every
blocked instance.
(This is based on the original patch by Sebastian, then backported to
0.2.2 and with warnings split into their own function.)
Our checks that we don't exceed the 50 KB size limit of extra-info
descriptors apparently failed. This patch fixes these checks and reserves
another 250 bytes for appending the signature. Fixes bug 2183.
We would never actually enforce multiplicity rules when parsing
annotations, since the counts array never got entries added to it for
annotations in the token list that got added by earlier calls to
tokenize_string.
Found by piebeer.
We had a spelling discrepancy between the manpage and the source code
for some option. Resolve these in favor of the manpage, because it
makes more sense (for example, HTTP should be capitalized).
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
We decided to no longer ship expert packages for OS X because they're a
lot of trouble to keep maintained and confuse users. For those who want
a tor on OS X without Vidalia, macports is a fine option. Alternatively,
building from source is easy, too.
The polipo stuff that is still required for the Vidalia bundle build can
now be found in the torbrowser repository,
git://git.torproject.org/torbrowser.git.
In the case where old_router == NULL but sdmap has an entry for the
router, we can currently safely infer that the old_router was not a
bridge. Add an assert to ensure that this remains true, and fix the
logic not to die with the tor_assert(old_router) call.
We used to enable ssp-buffer-size=1 only when building with
--enable-gcc-warnings. That would result in warnings (and no
protection for small arrays) when building with
--enable-gcc-hardening without enabling warnings, too. Fixes bug
2031.
Also remove an XXX: We now allow to build with -fstack-protector
by using --enable-gcc-hardening.
A node_t is an abstraction over routerstatus_t, routerinfo_t, and
microdesc_t. It should try to present a consistent interface to all
of them. There should be a node_t for a server whenever there is
* A routerinfo_t for it in the routerlist
* A routerstatus_t in the current_consensus.
(note that a microdesc_t alone isn't enough to make a node_t exist,
since microdescriptors aren't usable on their own.)
There are three ways to get a node_t right now: looking it up by ID,
looking it up by nickname, and iterating over the whole list of
microdescriptors.
All (or nearly all) functions that are supposed to return "a router"
-- especially those used in building connections and circuits --
should return a node_t, not a routerinfo_t or a routerstatus_t.
A node_t should hold all the *mutable* flags about a node. This
patch moves the is_foo flags from routerinfo_t into node_t. The
flags in routerstatus_t remain, but they get set from the consensus
and should not change.
Some other highlights of this patch are:
* Looking up routerinfo and routerstatus by nickname is now
unified and based on the "look up a node by nickname" function.
This tries to look only at the values from current consensus,
and not get confused by the routerinfo_t->is_named flag, which
could get set for other weird reasons. This changes the
behavior of how authorities (when acting as clients) deal with
nodes that have been listed by nickname.
* I tried not to artificially increase the size of the diff here
by moving functions around. As a result, some functions that
now operate on nodes are now in the wrong file -- they should
get moved to nodelist.c once this refactoring settles down.
This moving should happen as part of a patch that moves
functions AND NOTHING ELSE.
* Some old code is now left around inside #if 0/1 blocks, and
should get removed once I've verified that I don't want it
sitting around to see how we used to do things.
There are still some unimplemented functions: these are flagged
with "UNIMPLEMENTED_NODELIST()." I'll work on filling in the
implementation here, piece by piece.
I wish this patch could have been smaller, but there did not seem to
be any piece of it that was independent from the rest. Moving flags
forces many functions that once returned routerinfo_t * to return
node_t *, which forces their friends to change, and so on.
* MINIUPNPC rather than the generic UPNP
* Nick suggested a better abstraction model for tor-fw-helper
* Fix autoconf to build with either natpmp or miniupnpc
* Add AM_PROG_CC_C_O to fix automake complaint
* update spec to address nickm's concern
* refactor nat-pmp to match upnp state
* we prefer tor_snprintf to snprintf
* link properlty for tor_snprintf
* rename test_commandline_options to log_commandline_options
* cast this uint as an int
* detect possible FD_SETSIZE errors
* make note about future enhancements for natpmp
* add upnp enhancement note
* ChangeLog entry
* doxygen and check-spaces cleanup
* create tor-fw-helper.1.txt
This is needed for IOCP, since telling the IOCP backend about all
your CPUs is a good idea. It'll also come in handy with asn's
multithreaded crypto stuff, and for people who run servers without
reading the manual.
The autoreconf tool deals much better with detecting which tools to
use on your particular platform, handling cases where your
install-sh script gets stable, and lots of other little tricky
issues.
We still fall back to autoconf&&automake&&etc in the case where
"`which autoreconf 2>/dev/null`" says something we can't run.
This is the first change of the 0.2.3.x series.
Do not double-report signatures from unrecognized authorities both as
"from unknown authority" and "not present". Fixes bug 1956, bugfix on
0.2.2.16-alpha.
Our attempt to make compilation work on old versions of Windows
again while keeping wince compatibility broke the build for Win2k+.
helix reports this patch fixes the issue for WinXP. Bugfix on
0.2.2.15-alpha; related to bug 1797.
Karsten says: "the ChangeLog should say it's a bugfix on
0.2.2.15-alpha, because enabling stats while Tor is running (which
leads to this false log message) is only possible since then."
Sounds right enough to me. Tell me if I'm wrong.
When the CellStatistics option is off, we don't store cell insertion
times. Doing so would also not be very smart, because there seem to
still be some performance issues with this type of statistics. Nothing
harmful happens when we don't have insertion times, so we don't need to
alarm the user.
Previously[*], the function would start with the first stream on the
circuit, and let it package as many cells as it wanted before
proceeding to the next stream in turn. If a circuit had many live
streams that all wanted to package data, the oldest would get
preference, and the newest would get ignored.
Now, we figure out how many cells we're willing to send per stream,
and try to allocate them fairly.
Roger diagnosed this in the comments for bug 1298.
[*] This bug has existed since before the first-ever public release
of Tor. It was added by r152 of Tor on 26 Jan 2003, which was
the first commit to implement streams (then called "topics").
This is not the oldest bug to be fixed in 0.2.2.x: that honor
goes to the windowing bug in r54, which got fixed in e50b7768 by
Roger with diagnosis by Karsten. This is, however, the most
long-lived bug to be fixed in 0.2.2.x: the r54 bug was fixed
2580 days after it was introduced, whereas I am writing this
commit message 2787 days after r152.
Bridges and other relays not included in the consensus don't
necessarily have a non-zero bandwidth capacity. If all our
configured bridges had a zero bw capacity we would warn the
user. Change that.
Previously, we were also considering the time spent in
soft-hibernation. If this was a long time, we would wind up
underestimating our bandwidth by a lot, and skewing our wakeup time
towards the start of the accounting interval.
This patch also makes us store a few more fields in the state file,
including the time at which we entered soft hibernation.
Fixes bug 1789. Bugfix on 0.0.9pre5.
This will make changes for DST still work, and avoid double-spending
bytes when there are slight changes to configurations.
Fixes bug 1511; the DST issue is a bugfix on 0.0.9pre5.
When we introduced the code to close non-open OR connections after
KeepalivePeriod had passed, we replaced some code that said
if (!connection_is_open(conn)) {
/* let it keep handshaking forever */
} else if (do other tests here) {
...
with new code that said
if (!connection_is_open(conn) && past_keepalive) {
/* let it keep handshaking forever */
} else if (do other tests here) {
...
This was a mistake, since it made all the other tests start applying
to non-open connections, thus causing bug 1840, where non-open
connections get closed way early.
Fixes bug 1840. Bugfix on 0.2.1.26 (commit 67b38d50).
It's normal when bootstrapping to have a lot of different certs
missing, so we don't want missing certs to make us warn... unless
the certs we're missing are ones that we've tried to fetch a couple
of times and failed at.
May fix bug 1145.
This should keep WinCE working (unicode always-on) and get Win98
working again (unicode never-on).
There are two places where we explicitly use ASCII-only APIs, still:
in ntmain.c and in the unit tests.
This patch also fixes a bug in windoes tor_listdir that would cause
the first file to be listed an arbitrary number of times that was
also introduced with WinCE support.
Should fix bug 1797.
Setting CookieAuthFileGroupReadable but without setting CookieAuthFile makes
no sense, because unix directory permissions for the data directory prevent
the group from accessing the file anyways.
When this happens, run through the streams on the circuit and make
sure they're all blocked. If some aren't, that's a bug: block them
all and log it! If they all are, where did the cell come from? Log
it!
(I suspect that this actually happens pretty frequently, so I'm making
these log messages appear at INFO.)
If the voting interval was short enough, the two-minutes delay
of CONSENSUS_MIN_SECONDS_BEFORE_CACHING would confuse bridges
to the point where they would assert before downloading a consensus.
It it was even shorter (<4 minutes, I think), caches would
assert too. This patch fixes that by having replacing the
two-minutes value with MIN(2 minutes, interval/16).
Bugfix for 1141; the cache bug could occur since 0.2.0.8-alpha, so
I'm calling this a bugfix on that. Robert Hogan diagnosed this.
Done as a patch against maint-0.2.1, since it makes it hard to
run some kinds of testing networks.
With this patch we stop scheduling when we should write statistics using a
single timestamp in run_scheduled_events(). Instead, we remember when a
statistics interval starts separately for each statistic type in geoip.c
and rephist.c. Every time run_scheduled_events() tries to write stats to
disk, it learns when it should schedule the next such attempt.
This patch also enables all statistics to be stopped and restarted at a
later time.
This patch comes with a few refactorings, some of which were not easily
doable without the patch.
Once upon a time it made sense to keep all the Debian files in the
main Tor distribution, since repeatedly merging them back in was hard.
Now that we're on git, that's no longer so.
Peter's debian repository at debian/tor.git on our git server has the
most recent version of the tor-on-debian packaging stuff, and the versions
in our own repository have gotten out of date.
Resolves bug #1735.
We already had the country code ?? indicating an unknown country, so all we
needed to do to make unknown countries excludable was to make the ?? code
discoverable.
