Without this message getting logged at 'WARN', it's hard to
contextualize the messages we get about compression bombs, so this
message should fix#40175.
I'm rate-limiting this, however, since it _could_ get spammy if
somebody on the network starts acting up. (Right now it should be
very quiet; I've asked Sebastian to check it, and he says that he
doesn't hit this message in practice.)
Closes#40175.
Cached_dir_t is a somewhat "legacy" kind of storage when used for
consensus documents, and it appears that there are cases when
changing our settings causes us to stop updating those entries.
This can cause trouble, as @arma found out in #40375, where he
changed his settings around, and consensus diff application got
messed up: consensus diffs were being _requested_ based on the
latest consensus, but were being (incorrectly) applied to a
consensus that was no longer the latest one.
This patch is a minimal fix for backporting purposes: it has Tor do
the same search when applying consensus diffs as we use to request
them. This should be sufficient for correct behavior.
There's a similar case in GETINFO handling; I've fixed that too.
Fixes#40375; bugfix on 0.3.1.1-alpha.
Current counters are reset every heartbeat. This commit adds two
counters for the assigned and dropped onionskins that are not reset so
they can be exported onto the MetricsPort.
Closes#40387
Signed-off-by: David Goulet <dgoulet@torproject.org>
This resulted in the labels not being surrounded by double quotes and
thus Prometheus not liking it.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Emit on the MetricsPort all the DNS statistics we have that is the total
number of queries seen and errors per record type.
Related to #40367
Signed-off-by: David Goulet <dgoulet@torproject.org>
We now keep track of all errors and total number of request seen. This
is so we can expose those values to the MetricsPort to help Exit
operators monitor the DNS requests and failures.
Related to #40367.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This emits two events (read and write) of the total number that the
global connection limit was reached.
Related to #40367
Signed-off-by: David Goulet <dgoulet@torproject.org>
With this commit, a relay will emit metrics that give the total number
of sockets and total number of opened sockets.
Related to #40367
Signed-off-by: David Goulet <dgoulet@torproject.org>
With this commit, a relay now emits metrics event on the MetricsPort
related to how many onionskins were handled (processed or dropped) for
each handshake type.
Related to #40367
Signed-off-by: David Goulet <dgoulet@torproject.org>
With this commit, a relay now emits metrics event on the MetricsPort
related to the OOM invocation for:
- DNS cache
- GeoIP database
- Cell queues
- HSDir caches
Everytime the OOM is invoked, the number of bytes is added to the
metrics counter for that specific type of invocation.
Related to #40367
Signed-off-by: David Goulet <dgoulet@torproject.org>
The basic functions for the relay subsystem to expose metrics onto the
MetricsPort.
Part of #40367
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is a common function that a lot of subsystem can use which is to
format a label so move it out of the HS subsystem into the more generic
metrics library.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Turns out that passing client authorization keys to ADD_ONION for v3 was
not working because we were not setting the "is_client_auth_enabled"
flag to true once the clients were configured. This lead to the
descriptor being encoded without the clients.
This patch removes that flag and instead adds an inline function that
can be used to check if a given service has client authorization
enabled.
This will be much less error prone of needing to keep in sync the client
list and a flag instead.
Fixes#40378
Signed-off-by: David Goulet <dgoulet@torproject.org>
This function has been a no-op since Libevent 2.0.4-alpha, when
libevent got an arc4random() implementation. Libevent has finally
removed it, which will break our compilation unless we stop calling
it. (This is currently breaking compilation in OSS-fuzz.)
Closes#40371.
This is related to ticket #40360 which found this problem when a Bridge entry
with a transport name (let say obfs4) is set without a fingerprint:
Bridge obfs4 <IP>:<PORT> cert=<...> iat-mode=0
(Notice, no fingerprint between PORT and "cert=")
Problem: commit 09c6d03246 added a check in
get_sampled_guard_for_bridge() that would return NULL if the selected bridge
did not have a valid transport name (that is the Bridge transport name that
corresponds to a ClientTransportPlugin).
Unfortuantely, this function is also used when selecting our eligible guards
which is done *before* the transport list is populated and so the added check
for the bridge<->transport name is querying an empty list of transports
resulting in always returning NULL.
For completion, the logic is: Pick eligible guards (use bridge(s) if need be)
then for those, initiate a connection to the pluggable transport proxy and
then populate the transport list once we've connected.
Back to get_sampled_guard_for_bridge(). As said earlier, it is used when
selecting our eligible guards in a way that prevents us from selecting
duplicates. In other words, if that function returns non-NULL, the selection
continues considering the bridge was sampled before. But if it returns NULL,
the relay is added to the eligible list.
This bug made it that our eligible guard list was populated with the *same*
bridge 3 times like so (remember no fingerprint):
[info] entry_guards_update_primary(): Primary entry guards have changed. New primary guard list is:
[info] entry_guards_update_primary(): 1/3: [bridge] ($0000000000000000000000000000000000000000)
[info] entry_guards_update_primary(): 2/3: [bridge] ($0000000000000000000000000000000000000000)
[info] entry_guards_update_primary(): 3/3: [bridge] ($0000000000000000000000000000000000000000)
When tor starts, it will find the bridge fingerprint by connecting to it and
will then update the primary guard list by calling
entry_guard_learned_bridge_identity() which then goes and update only 1 single
entry resulting in this list:
[debug] sampled_guards_update_consensus_presence(): Sampled guard [bridge] ($<FINGERPRINT>) is still listed.
[debug] sampled_guards_update_consensus_presence(): Sampled guard [bridge] ($0000000000000000000000000000000000000000) is still listed.
[debug] sampled_guards_update_consensus_presence(): Sampled guard [bridge] ($0000000000000000000000000000000000000000) is still listed.
And here lies the problem, now tor is stuck attempting to wait for a valid
descriptor for at least 2 guards where the second one is a bunch of zeroes and
thus tor will never fully bootstraps:
[info] I learned some more directory information, but not enough to build a
circuit: We're missing descriptors for 1/2 of our primary entry guards
(total microdescriptors: 6671/6703). That's ok. We will try to fetch missing
descriptors soon.
Now, why passing the fingerprint then works? This is because the list of
guards contains 3 times the same bridge but they all have a fingerprint and so
the descriptor can be found and tor can bootstraps.
The solution here is to entirely remove the transport name check in
get_sampled_guard_for_bridge() since the transport_list is empty at that
point. That way, the eligible guard list only gets 1 entry, the bridge, and
can then go on to bootstrap properly.
It is OK to do so since when launching a bridge descriptor fetch, we validate
that the bridge transport name is OK and thus avoid connecting to a bridge
without a ClientTransportPlugin. If we wanted to keep the check in place, we
would need to populate the transport_list much earlier and this would require
a much bigger refactoring.
Fixes#40360
Signed-off-by: David Goulet <dgoulet@torproject.org>
We use it in router.c, where chunks are joined with "", not with
NL... so leaving off the terminating NL will lead to an unparseable
extrainfo.
Found by toralf. Bug not in any released Tor.
```
src/feature/stats/rephist.c: In function ‘overload_happened_recently’:
src/feature/stats/rephist.c:215:21: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (overload_time > approx_time() - 3600 * n_hours) {
```
from https://gitlab.torproject.org/tpo/core/tor/-/issues/40341#note_2729364
- Implement overload statistics structure.
- Implement function that keeps track of overload statistics.
- Implement function that writes overload statistics to descriptor.
- Unittest for the whole logic.
This option changes the time for which a bandwidth measurement period
must have been in progress before we include it when reporting our
observed bandwidth in our descriptors. Without this option, we only
consider a time period towards our maximum if it has been running
for a full day. Obviously, that's unacceptable for testing
networks, where we'd like to get results as soon as possible.
For non-testing networks, I've put a (somewhat arbitrary) 2-hour
minimum on the option, since there are traffic analysis concerns
with immediate reporting here.
Closes#40337.
We were looking for the first instance of "directory-signature "
when instead the correct behavior is to look for the first instance
of "directory-signature " at the start of a line.
Unfortunately, this can be exploited as to crash authorities while
they're voting.
Fixes#40316; bugfix on 0.2.2.4-alpha. This is TROVE-2021-002,
also tracked as CVE-2021-28090.
When reloading a service, we can re-register a service and thus end up again
in the metrics store initialization code path which is fine. No need to BUG()
anymore.
Fixes#40334
Signed-off-by: David Goulet <dgoulet@torproject.org>
The directory_fetches_from_authorities() is used to know if a client or relay
should fetch data from an authority early in the boot process.
We had a condition in that function that made a relay trigger that fetch if it
didn't know its address (so we can learn it). However, when this is called,
the address discovery has not been done yet so it would always return true for
a relay.
Furthermore, it would always trigger a log notice that the IPv4 couldn't be
found which was inevitable because the address discovery process has not been
done yet (done when building our first descriptor).
It is also important to point out that starting in 0.4.5.1-alpha, asking an
authority for an address is done during address discovery time using a one-hop
circuit thus independent from the relay deciding to fetch or not documents
from an authority.
Small fix also is to reverse the "IPv(4|6)Only" flag in the notice so that if
we can't find IPv6 it would output to use IPv4Only.
Fixes#40300
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is a new detection type which is that a relay can now control the rate of
client connections from a single address.
The mechanism is pretty simple, if the rate/burst is reached, the address is
marked for a period of time and any connection from that address is denied.
Closes#40253
Signed-off-by: David Goulet <dgoulet@torproject.org>
When trying to find our address to publish, we would log notice if we couldn't
find it from the cache but then we would look at the suggested cache (which
contains the address from the authorities) in which we might actually have the
address.
Thus that log notice was misplaced. Move it down after the suggested address
cache lookup.
Closes#40300
Signed-off-by: David Goulet <dgoulet@torproject.org>
Relay will always publish 0 as DirPort value in their descriptor from now on
except authorities.
Related to #40282
Signed-off-by: David Goulet <dgoulet@torproject.org>
Regular relays are about to get their DirPort removed so that reachability
test is not useful anymore
Authorities will still use the DirPort but because network reentry towards
their DirPort is now denied network wide, this test is not useful anymore and
so it should simply be considered reachable at all time.
Part of #40282
Signed-off-by: David Goulet <dgoulet@torproject.org>
With v2 support for HSFETCH gone, we only support v3 addresses. We don't
support v2 descriptor IDs anymore and hence we can remove that code.
The code removed would ensure that if a v2 descriptor ID was provided, the user
also had to provide HSDirs explicitly.
In the v3 case, the code should work even if no HSDirs are provided, and Tor
would find the HSDirs itself.
For a user using "HiddenServiceVersion 2", a log warning is emitted indicating
that v2 is now obsolete instead of a confusing message saying that the version
is not supported.
Also, if an introduction point gets a legacy (v2) ESTABLISH_INTRO, we'll
simply close the circuit without emitting a protocol warning log onto the
relay.
Related to #40266
Signed-off-by: David Goulet <dgoulet@torproject.org>
We still keep v2 rendezvous stats since we will allow them until the network
has entirely phased out.
Related to #40266
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is unfortunately massive but both functionalities were extremely
intertwined and it would have required us to actually change the HSv2 code in
order to be able to split this into multiple commits.
After this commit, there are still artefacts of v2 in the code but there is no
more support for service, intro point and HSDir.
The v2 support for rendezvous circuit is still available since that code is
the same for the v3 and we will leave it in so if a client is able to
rendezvous on v2 then it can still transfer traffic. Once the entire network
has moved away from v2, we can remove v2 rendezvous point support.
Related to #40266
Signed-off-by: David Goulet <dgoulet@torproject.org>
It can be called with strings that should have been
length-delimited, but which in fact are not. This can cause a
CPU-DoS bug or, in a worse case, a crash.
Since this function isn't essential, the best solution for older
Tors is to just turn it off.
Fixes bug 40286; bugfix on 0.2.2.1-alpha when dump_desc() was
introduced.
Now that exit relays don't allow exit connections to directory authority
DirPorts, the follow-up step is to make directory authorities stop doing
DirPort reachability checks.
Fixes#40287
Signed-off-by: David Goulet <dgoulet@torproject.org>
Turns out, we forgot to add the METRICS connection type fo the finished
flushing handler.
Fixes#40295
Signed-off-by: David Goulet <dgoulet@torproject.org>
We were just looking at the family which is not correct because it is possible
to have two explicit ORPort for the same family but different addresses. One
example is:
ORPort 127.0.0.1:9001 NoAdvertise
ORPort 1.2.3.4:9001 NoListen
Thus, this patch now ignores ports that have different addresses iff they are
both explicits. That is, if we have this example, also two different
addresses:
ORPort 9001
ORPort 127.0.0.1:9001 NoAdvertise
The first one is implicit and second one is explicit and thus we have to
consider them for removal which in this case would remove the "ORPort 9001" in
favor of the second port.
Fixes#40289
Signe-off-by: David Goulet <dgoulet@torproject.org>
That comes from 685c4866ac which added that
check correctly except for when we build a descriptor.
We already omit the IPv6 address, if we need to, when we encode the descriptor
but we need to keep the actual discovered address in the descriptor so we can
notice future IP changes and be able to assess that we are not publishable as
long as we don't specifically set the omit flag.
This lead to also having tor noticing that our IP changed from <nothing> (no
IPv6 in the descriptor) to a discovered one which would trigger every minute.
Fixes#40279, #40288
Signed-off-by: David Goulet <dgoulet@torproject.org>
Handle the EOF situation for a metrics connection. Furthermore, if we failed
to fetch the data from the inbuf properly, mark the socket as closed because
the caller, connection_process_inbuf(), assumes that we did so on error.
Fixes#40257
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previously we would warn in this case... but there's really no
justification for doing so, and it can only cause confusion.
Fixes bug #40281; bugfix on 0.4.0.1-alpha.
In two instances we must look at this flag:
1. When we build the descriptor so the IPv6 is NOT added to the descriptor in
case we judge that we need to omit the address but still publish.
2. When we are deciding if the descriptor is publishable. This flags tells us
that the IPv6 was not found reachable but we should still publish.
Fixes#40279
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is to minimize false positive and thus deny reentry to Exit connections
that were in reality not re-entering. Helps with overall UX.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is to minimize false positive and thus deny reentry to Exit connections
that were in reality not re-entering. Helps with overall UX.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to deny re-entry in the network, we now keep a bloomfilter of relay
ORPort + address and authorities ORPort + address and DirPort + address
combinations.
So when an Exit stream is handled, we deny anything connecting back into the
network on the ORPorts for relays and on the ORPort+DirPort for the
authorities.
Related to #2667
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order to deny re-entry in the network, we now keep a bloomfilter of relay
ORPort + address and authorities ORPort + address and DirPort + address
combinations.
So when an Exit stream is handled, we deny anything connecting back into the
network on the ORPorts for relays and on the ORPort+DirPort for the
authorities.
Related to #2667
Signed-off-by: David Goulet <dgoulet@torproject.org>
Everytime we try to discover an address we want to publish, emit a log notice
if we are unable to find it even though an ORPort was configured for it.
Because the function can be called quite often, we rate limit that notice to
every hour so it gets annoying just enough so the operator fixes that.
Related to #40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
We would before do an address discovery and then a lookup in the cache if not
found which is now simplified by calling relay_find_addr_to_publish() directly
which does all those combined.
Furthermore, by doing so, we won't trigger an address discovery every minute
if we have no ORPort configured for the family.
Fixes#40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now that relay_find_addr_to_publish() checks if we actually have an ORPort, we
can simplify the descriptor building phase for IPv6.
This also avoid triggering an IPv6 discovery if the IPv4 can't be found in the
first place.
Related to #40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
In other words, if we don't have an ORPort configured for a specific family
(IPv4/v6), we don't bother doing address discovery.
Related to #40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
Let external bridge reachability testing tools discard cached
bridge descriptors when setting new bridges, so they can be sure
to get a clean reachability test.
Implements ticket 40209.
This step happens after we make each consensus flavor, and before we
worry about sigs or anything. That way if Tor crashes, or if we fail to
get enough sigs, we still have a chance to know what consensus we wanted
to make.
Don't pick the bridge as the guard or launch descriptor fetch if no transport
is found.
Fixes#40106
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch limits the number of items in the consensus diff cache to 64
on the Windows platform. Hopefully, this will allow us to investigate a
smarter fix while avoiding the situation reported in tor#24857 where
Windows relay operators report Tor using 100% CPU.
See: tor#24857
We used to actually discard ORPorts that were the same port and same family
but they could have different address.
Instead, we need to keep all different ORPorts so we can bind a listener on
each of them. We will publish only one of these in our descriptor though.
Related to #40246
Signed-off-by: David Goulet <dgoulet@torproject.org>
This reverts commit d07f17f676.
We don't want to consider an entire routable IPv6 network as sybil if more
than 2 relays happen to be on it. For path selection it is very important but
not for selecting relays in the consensus.
Fixes#40243
We can end up trying to find our address from an authority while we don't have
yet its descriptor.
In this case, don't BUG() and just come back later.
Closes#40231
Signed-off-by: David Goulet <dgoulet@torproject.org>
In case building the descriptor would fail, we could still flag that we did in
fact publish the descriptors leading to no more attempt at publishing it which
in turn makes the relay silent for some hours and not try to rebuild the
descriptor later.
This has been spotted with #40231 because the operator used a localhost
address for the ORPort and "AssumeReachable 1" leading to this code path where
the descriptor failed to build but all conditions to "can I publish" were met.
Related to #40231
Signed-off-by: David Goulet <dgoulet@torproject.org>
This one should work on GCC _and_ on Clang. The previous version
made Clang happier by not having unreachable "fallthrough"
statements, but made GCC sad because GCC didn't think that the
unconditional failures were really unconditional, and therefore
_wanted_ a FALLTHROUGH.
This patch adds a FALLTHROUGH_UNLESS_ALL_BUGS_ARE_FATAL macro that
seems to please both GCC and Clang in this case: ordinarily it is a
FALLTHROUGH, but when ALL_BUGS_ARE_FATAL is defined, it's an
abort().
Fixes bug 40241 again. Bugfix on earlier fix for 40241, which was
merged into maint-0.3.5 and forward, and released in 0.4.5.3-rc.
Our original code for parsing these parameters out of our list of
parameters pre-dated us having the
dirvote_get_intermediate_param_value() function... and it was buggy.
Specifically, it would reject any " ... K=V ..." value
where there were additional unconverted characters after the V, and
use the default value instead,
We haven't run into this yet because we've never voted for
bwweightscale to be anything besides the default 10000, or
maxunmeasuredbw to be anything besides the default 20.
This requires a new consensus method because it is a change in how
consensuses are computed.
Fixes bug 19011; bugfix on 0.2.2.10-alpha.
Some days before this commit, the network experienced a DDoS on the directory
authorities that prevented them to generate a consensus for more than 5 hours
straight.
That in turn entirely disabled onion service v3, client and service side, due
to the subsystem requiring a live consensus to function properly.
We know require a reasonably live consensus which means that the HSv3
subsystem will to its job for using the best consensus tor can find. If the
entire network is using an old consensus, than this should be alright.
If the service happens to use a live consensus while a client is not, it
should still work because the client will use the current SRV it sees which
might be the previous SRV for the service for which it still publish
descriptors for.
If the service is using an old one and somehow can't get a new one while
clients are on a new one, then reachability issues might arise. However, this
is a situation we already have at the moment since the service will simply not
work if it doesn't have a live consensus while a client has one.
Fixes#40237
Signed-off-by: David Goulet <dgoulet@torproject.org>
Thanks to proposal 315 / ticket #30132, more fields are now
required in these documents. But ancient Tors that try to upload
obsolete documents were causing the authorities to log warnings
about missing fields, and to do so very spammily.
We now detect the missing fields before tokenizing, and log at
debug. This is a bit of ugliness, but it's probably a safer choice
than making _all_ unparseable-desc warnings into debug-level logs.
I'm looking at identity-ed25519 in extrainfos and proto in
routerdescs because they were (I believe) the latest-added fields in
Tor's history: any Tor that lacks them will also lack the other
newly required fields.
Fixes bug #40238; bugfix on 0.4.5.1-alpha.
We're getting "fallback annotation annotation in unreachable code"
warnings when we build with ALL_BUGS_ARE_FATAL. This patch fixes
that.
Fixes bug 40241. Bugfix on 0.3.5.4-alpha.
The previous parser only considered stats files _starting_ with the
timestamp tag, not stats files having the timestamp tag in a later
position. While this applies to all current stats files, a future
stats file might look differently. Better to fix the function now than
be surprised in another 9 years from now.
This commit also adds a test case for such future stats, and it fixes
stats file paths in newly added unit tests.
It turns out that 9 years ago, we stopped appending data into stats file and
rather overwrite everytime we have new stats (see commit
a6a127c833)
The load_stats_file() function was still thinking that we could have the same
line many times in the file which turns out to be false since 9 years ago.
However, that did not cause problem until IPv6 connection stats came along
which introduced a new line in conn-stats: "ipv6-conn-bi-direct ...".
Before, that file contained a single line starting with the tag
"conn-bi-direct". That very tag appears also in the IPv6 tag (see above) so
the load_stats_file() function would consider that the IPv6 line as the last
tag to be appeneded to the file and fail to report the line above (for IPv4).
It would actually truncate the IPv6 line and report it (removing the "ipv6-"
part).
In other words, "conn-bi-direct" was not reported and instead
"ipv6-conn-bi-direct" was used without the "ipv6-" part.
This commit refactors the entire function so that now it looks for a
"timestamp tag" to validate and then if everything is fine, returns the entire
content of the file. The refactor simplifies the function, adds logging in
case of failures and modernize it in terms of coding standard.
Unit tests are also added that makes sure the loaded content matches the
entire file if timestamp validation passes.
Fixes#40226
Signed-off-by: David Goulet <dgoulet@torproject.org>
When making sure we have a Bridge line with a ClientTransportPlugin, we
now check in the managed proxy list and so we can catch any missing
ClientTransportPlugin for a Bridge line.
Fixes#40106
Signed-off-by: David Goulet <dgoulet@torproject.org>
The rest of rephist.c is doing the same kind of unsigned casting. For example
see rep_hist_format_buffer_stats() and rep_hist_format_exit_stats().
The previous switch to %ld made Appveyor fail:
https://ci.appveyor.com/project/torproject/tor/builds/36118502
The function in charge of removing duplicate ORPorts from our configured ports
was skipping all non ORPorts port but only for the outer loop thus resulting
in comparing an ORPort with a non-ORPort which lead to problems.
For example, tor configured with the following would fail:
ORPort auto
DirPort auto
Both end up being the same configuration except that one is a OR listener and
one is a Dir listener. Thus because of the missing check in the inner loop,
they looked exactly the same and thus one is removed.
Fixes#40195
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, this commit moves the launch_dummy_circuit_as_needed() function into
relay_find_addr.c and renames it to relay_addr_learn_from_dirauth(). This is
an attempt to centralize anything relate with address discovery in the right
module.
Second, when building a descriptor and we fail to discover our address,
immediately launch a dummy circuit to an authority in an attempt to learn our
descriptor.
It is still only done every 20 minutes even though the descriptor build is
done every minute. We ought to avoid load on the authority and if we can't
learn in the first place our address from them, chances are more things are
wrong.
Related to #40071
Signed-off-by: David Goulet <dgoulet@torproject.org>
Regularly, tor looks if its IP has changed. It does the entire auto discovery
process again. However, it is possible that it does not find anything.
Instead of thinking the IP changed to an unknown address, look at our cache
and see if that value has changed.
The reason for this is because if tor gets its address as a suggestion from a
directory authority, it is because the auto discovery failed and thus that
address should be consider for the IP change check.
Related to #40071
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tor now can learn its address from a NETINFO cell coming from an authority.
Thus, instead from launching a dummy descriptor fetch to learn the address
from the directory response (unauthenticated), we simply now launch a one-hop
testing circuit.
Related to #40071
Signed-off-by: David Goulet <dgoulet@torproject.org>
Commit c3a0f75796 added this feature for ORPort
that we ignore any port that is not the family of our default address when
parsing the port. So if port_parse_config() was called with an IPv4 default
address, all IPv6 address would be ignored.
That makes sense for ORPort since we call twice port_parse_config() for
0.0.0.0 and [::] but for the rest of the ports, it is not good since a
perfectly valid configuration can be:
SocksPort 9050
SocksPort [::1]:9050
Any non-ORPort only binds by default to an IPv4 except the ORPort that binds
to both IPv4 and IPv6 by default.
The fix here is to always parse all ports within port_parse_config() and then,
specifically for ORPort, remove the duplicates or superseding ones. The
warning is only emitted when a port supersedes another.
A unit tests is added to make sure SocksPort of different family always exists
together.
Fixes#40183
Signed-off-by: David Goulet <dgoulet@torproject.org>
Typos found with codespell.
Please keep in mind that this should have impact on actual code
and must be carefully evaluated:
src/core/or/lttng_circuit.inc
- ctf_enum_value("CONTROLER", CIRCUIT_PURPOSE_CONTROLLER)
+ ctf_enum_value("CONTROLLER", CIRCUIT_PURPOSE_CONTROLLER)
In the past, only authorities and clients had to use that function because of
the SRV subsystem. However, because of its use in rep_hist_hs_stats_init() it
will now also be used by relays when bootstrapping without a consensus. Make it
do something sensible.
Another approach (instead of using magic values) would be to wait
initialization of HSv3 stats until we get a consensus but that seems messy to
schedule.
Another approach would be to make dirauth_sched_get_configured_interval() also
work for relays (particularly when TestingNetwork is enabled), but that also
seems a good amount of work.
The loop in the earlier patch would invoke undefined behavior in two
ways: First, it would check whether it was looking at a space before
it checked whether the pointer was in-range. Second, it would let a
pointer reach a position _before_ the start of a string, which is
not allowed.
I've removed the assertion about empty messages: empty messages can
be their own warning IMO.
I've also added tests for this formatting code, to make sure it
actually works.
The total number of rendezvous circuit created and the number of established
ones which is a gauge that decreases to keep an updated counter.
Related to #40063
Signed-off-by: David Goulet <dgoulet@torproject.org>
At this commit, a new service registers to the module and a store is created.
It also remove itself from the metrics module if it goes away.
In order to hook into the metrics subsystem, this commit attaches the HS
subsystem into the subsystem global list so its get_metrics() call can be
accessible.
HS initialization is still _not_ done through the subsys module as it is
likely require much more testing.
Related to #40063
Signed-off-by: David Goulet <dgoulet@torproject.org>
First I began with a set of candidates:
The client's _required_ list starts with all the protocols
supported by every release in 0.2.9-stable through current
master.
The client's _required_ list starts with all the protocols
supported by every release in 0.3.5-stable through current
master.
Everybody's _recommended_ list starts with all the protocols
supported by every release in 0.3.5-stable through current master.
Then I removed the protocol versions that we do not actually want to
require or recommend:
DirCache=1 (deprecated)
HSDir=1, HSIntro=1-3, HSRend=1 (deprecated)
(All HS* protocol requirements for clients)
Link=1-3 (deprecated)
LinkAuth=1 (obsolete)
Relay=1 (obsolete)
Make it possible to specify multiple ConsensusParams torrc
lines.
Now directory authority operators can for example put the
main ConsensusParams config in one torrc file and then add to it
from a different torrc file.
Closes ticket 40164.
