We had some code to fix up the 'status' return value to -1 on error
if it wasn't set, but it was unreachable because our code was
correct. Tweak this by initializing status to -1, and then only
setting it to 0 on success. Also add a goto which was missing: its
absence was harmless.
[CID 718614, 718616]
(We allowed it previously, but produced an LD_BUG message when it
happened, which is not consistent
Also, remove inconsistent NULL checks before calling
rend_service_intro_free.
(Removing the check is for CID 718613)
If 'intro' is NULL in these functions, I'm pretty sure that the
error message must be set before we hit the end. But scan-build
doesn't notice that, and is worried that we'll do a null-pointer
dereference in the last-chance errormsg generation.
Fortunately, later checks mean that uninitialized data can't get sent
to the network by this bug. Unfortunately, reading uninitialized heap
*can* (in some cases, with some allocators) cause a crash if you get
unlucky and go off the end of a page.
Found by asn. Bugfix on 0.2.4.1-alpha.
Now that circid_t is 4 bytes long, the default integer promotions will
leave it alone when sizeof(int) == 4, which will leave us formatting an
unsigned as an int. That's technically undefined behavior.
Fixes bug 8447 on bfffc1f0fc. Bug not
in any released Tor.
The refactoring in commit 471ab34032 wasn't complete enough: we
were checking the auth_len variable, but never actually setting it,
so it would never seem that authentication had been provided.
This commit also removes a bunch of unused variables from
rend_service_introduce, whose unusedness we hadn't noticed because
we were wiping them at the end of the function.
Fix for bug 8207; bugfix on 0.2.4.1-alpha.
This is meant to avoid conflict with the built-in log() function in
math.h. It resolves ticket 7599. First reported by dhill.
This was generated with the following perl script:
#!/usr/bin/perl -w -i -p
s/\blog\(LOG_(ERR|WARN|NOTICE|INFO|DEBUG)\s*,\s*/log_\L$1\(/g;
s/\blog\(/tor_log\(/g;
Path use bias measures how often we can actually succeed using the circuits we
actually try to use. It is a subset of path bias accounting, but it is
computed as a separate statistic because the rate of client circuit use may
vary depending on use case.
This is an automatically generated commit, from the following perl script,
run with the options "-w -i -p".
s/smartlist_string_num_isin/smartlist_contains_int_as_string/g;
s/smartlist_string_isin((?:_case)?)/smartlist_contains_string$1/g;
s/smartlist_digest_isin/smartlist_contains_digest/g;
s/smartlist_isin/smartlist_contains/g;
s/digestset_isin/digestset_contains/g;
The handshake_digest field was never meaningfully a digest *of* the
handshake, but rather is a digest *from* the handshake that we exapted
to prevent replays of ESTABLISH_INTRO cells. The ntor handshake will
generate it as more key material rather than taking it from any part
of the circuit handshake reply..
Apparently some compilers like to eliminate memset() operations on
data that's about to go out-of-scope. I've gone with the safest
possible replacement, which might be a bit slow. I don't think this
is critical path in any way that will affect performance, but if it
is, we can work on that in 0.2.4.
Fixes bug 7352.
This is mostly a conversion from this pattern:
log("... %s:%d ...", fmt_and_decorate_addr(&addr), port);
to this:
log("... %s ...", fmt_addrport(&addr, port));
The output is the same in all cases.
When I removed version_supports_begindir, I accidentally removed the
mechanism we had been using to make a directory cache self-test its
directory port. This caused bug 6815, which caused 6814 (both in
0.2.4.2-alpha).
To fix this bug, I'm replacing the "anonymized_connection" argument to
directory_initiate_command_* with an enumeration to say how indirectly
to connect to a directory server. (I don't want to reinstate the
"version_supports_begindir" argument as "begindir_ok" or anything --
these functions already take too many arguments.)
For safety, I made sure that passing 0 and 1 for 'indirection' gives
the same result as you would have gotten before -- just in case I
missed any 0s or 1s.
There was some code in the "err:" block that would always log a
warning, reporting an "unknown error" if we hadn't set err_msg. But
there were also plenty of "goto err" blocks that did their own
logging, and never set err_msg at all. Now we should only log when
we have an error message to log.
This fixes bug 6638, from no released Tor version.
We were doing a tor_strclear() on client_keys_str when it might not
even be set.
Fix for bug 6255; bug not in any release of Tor. Thanks to katmagic
for finding this one!
Now it's an orthodox "goto err/done" exit path, and it isn't some
screwy thing where we stick err/done at the end of a loop and
duplicate our cleanup code.
Previously, we would reset it at the drop of a hat -- every time a second
passes without any of the intro-point circs already launched for the
service failing.
Fixes bug 4607.
Comments below focus on changes, see diff for added code.
New type tor_addr_port_t holding an IP address and a TCP/UDP port.
New flag in routerinfo_t, ipv6_preferred. This should go in the
node_t instead but not now.
Replace node_get_addr() with
- node_get_prim_addr() for primary address, i.e. IPv4 for now
- node_get_pref_addr() for preferred address, IPv4 or IPv6.
Rename node_get_addr_ipv4h() node_get_prim_addr_ipv4h() for
consistency. The primary address will not allways be an IPv4 address.
Same for node_get_orport() -> node_get_prim_orport().
Rewrite node_is_a_configured_bridge() to take all OR ports into account.
Extend argument list to extend_info_from_node and
extend_info_from_router with a flag indicating if we want to use the
routers primary address or the preferred address. Use the preferred
address in as few situtations as possible for allowing clients to
connect to bridges over IPv6.
The Right Way to expire an intro point is to establish a new one to
replace it, publish a new descriptor that doesn't list any expiring intro
points, and *then*, once our upload attempts for the new descriptor have
ended (whether in success or failure), close the expiring intro points.
Unfortunately, we can't find out when the new descriptor has actually been
uploaded, so we'll have to settle for a five-minute timer.
There should be no significant behaviour changes due to this commit (only
a log-message change or two), despite the rather massive overhaul, so this
commit doesn't include a changes/ file. (The commit that teaches
intro_point_should_expire_now to return non-zero gets a changes/ file,
though.)
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Previously we were using router_get_by_id(foo) to test "do we have a
descriptor that will let us make an anonymous circuit to foo". But
that isn't right for microdescs: we should have been using node_t.
Fixes bug 3601; bugfix on 0.2.3.1-alpha.
All of the routerset_contains*() functions return 0 if their
routerset_t argument is NULL. Therefore, there's no point in
doing "if (ExcludeNodes && routerset_contains*(ExcludeNodes...))",
for example.
This patch fixes every instance of
if (X && routerstatus_contains*(X,...))
Note that there are other patterns that _aren't_ redundant. For
example, we *don't* want to change:
if (EntryNodes && !routerstatus_contains(EntryNodes,...))
Fixes#2797. No bug here; just needless code.
This lets us make a lot of other stuff const, allows the compiler to
generate (slightly) better code, and will make me get slightly fewer
patches from folks who stick mutable stuff into or_options_t.
const: because not every input is an output!
Original message from bug3393:
check_private_dir() to ensure that ControlSocketsGroupWritable is
safe to use. Unfortunately, check_private_dir() only checks against
the currently running user… which can be root until privileges are
dropped to the user and group configured by the User config option.
The attached patch fixes the issue by adding a new effective_user
argument to check_private_dir() and updating the callers. It might
not be the best way to fix the issue, but it did in my tests.
(Code by lunar; changelog by nickm)
The conflicts were mainly caused by the routerinfo->node transition.
Conflicts:
src/or/circuitbuild.c
src/or/command.c
src/or/connection_edge.c
src/or/directory.c
src/or/dirserv.c
src/or/relay.c
src/or/rendservice.c
src/or/routerlist.c
This patch introduces a few new functions in router.c to produce a
more helpful description of a node than its nickame, and then tweaks
nearly all log messages taking a nickname as an argument to call these
functions instead.
There are a few cases where I left the old log messages alone: in
these cases, the nickname was that of an authority (whose nicknames
are useful and unique), or the message already included an identity
and/or an address. I might have missed a couple more too.
This is a fix for bug 3045.
Conflicts in various places, mainly node-related. Resolved them in
favor of HEAD, with copying of tor_mem* operations from bug3122_memcmp_022.
src/common/Makefile.am
src/or/circuitlist.c
src/or/connection_edge.c
src/or/directory.c
src/or/microdesc.c
src/or/networkstatus.c
src/or/router.c
src/or/routerlist.c
src/test/test_util.c
Conflicts throughout. All resolved in favor of taking HEAD and
adding tor_mem* or fast_mem* ops as appropriate.
src/common/Makefile.am
src/or/circuitbuild.c
src/or/directory.c
src/or/dirserv.c
src/or/dirvote.c
src/or/networkstatus.c
src/or/rendclient.c
src/or/rendservice.c
src/or/router.c
src/or/routerlist.c
src/or/routerparse.c
src/or/test.c
Here I looked at the results of the automated conversion and cleaned
them up as follows:
If there was a tor_memcmp or tor_memeq that was in fact "safe"[*] I
changed it to a fast_memcmp or fast_memeq.
Otherwise if there was a tor_memcmp that could turn into a
tor_memneq or tor_memeq, I converted it.
This wants close attention.
[*] I'm erring on the side of caution here, and leaving some things
as tor_memcmp that could in my opinion use the data-dependent
fast_memcmp variant.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
This looked at first like another fun way around our node selection
logic: if we had introduction circuits, and we wound up building too
many, we would turn extras into general-purpose circuits. But when we
did so, we wouldn't necessarily check whether the general-purpose
circuits conformed to our node constraints. For example, the last
node could totally be in ExcludedExitNodes and we wouldn't have cared...
...except that the circuit should already be internal, so it won't get user
streams attached to it, so the transition should generally be allowed.
Add an assert to make sure we're right about this, and have it not
check whether ExitNodes is set, since that's irrelevant to internal
circuits.
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
(Backport from 0.2.2's 5ed73e3807)
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
Our public key functions assumed that they were always writing into a
large enough buffer. In one case, they weren't.
(Incorporates fixes from sebastian)
A node_t is an abstraction over routerstatus_t, routerinfo_t, and
microdesc_t. It should try to present a consistent interface to all
of them. There should be a node_t for a server whenever there is
* A routerinfo_t for it in the routerlist
* A routerstatus_t in the current_consensus.
(note that a microdesc_t alone isn't enough to make a node_t exist,
since microdescriptors aren't usable on their own.)
There are three ways to get a node_t right now: looking it up by ID,
looking it up by nickname, and iterating over the whole list of
microdescriptors.
All (or nearly all) functions that are supposed to return "a router"
-- especially those used in building connections and circuits --
should return a node_t, not a routerinfo_t or a routerstatus_t.
A node_t should hold all the *mutable* flags about a node. This
patch moves the is_foo flags from routerinfo_t into node_t. The
flags in routerstatus_t remain, but they get set from the consensus
and should not change.
Some other highlights of this patch are:
* Looking up routerinfo and routerstatus by nickname is now
unified and based on the "look up a node by nickname" function.
This tries to look only at the values from current consensus,
and not get confused by the routerinfo_t->is_named flag, which
could get set for other weird reasons. This changes the
behavior of how authorities (when acting as clients) deal with
nodes that have been listed by nickname.
* I tried not to artificially increase the size of the diff here
by moving functions around. As a result, some functions that
now operate on nodes are now in the wrong file -- they should
get moved to nodelist.c once this refactoring settles down.
This moving should happen as part of a patch that moves
functions AND NOTHING ELSE.
* Some old code is now left around inside #if 0/1 blocks, and
should get removed once I've verified that I don't want it
sitting around to see how we used to do things.
There are still some unimplemented functions: these are flagged
with "UNIMPLEMENTED_NODELIST()." I'll work on filling in the
implementation here, piece by piece.
I wish this patch could have been smaller, but there did not seem to
be any piece of it that was independent from the rest. Moving flags
forces many functions that once returned routerinfo_t * to return
node_t *, which forces their friends to change, and so on.
The new rule is: safe_str_X() means "this string is a piece of X
information; make it safe to log." safe_str() on its own means
"this string is a piece of who-knows-what; make it safe to log".
Some *_free functions threw asserts when passed NULL. Now all of them
accept NULL as input and perform no action when called that way.
This gains us consistence for our free functions, and allows some
code simplifications where an explicit null check is no longer necessary.
See task 1114. The most plausible explanation for someone sending us weak
DH keys is that they experiment with their Tor code or implement a new Tor
client. Usually, we don't care about such events, especially not on warn
level. If we really care about someone not following the Tor protocol, we
can set ProtocolWarnings to 1.
Tor now reads the "circwindow" parameter out of the consensus,
and uses that value for its circuit package window rather than the
default of 1000 cells. Begins the implementation of proposal 168.
Fix an obscure bug where hidden services on 64-bit big-endian
systems might mis-read the timestamp in v3 introduce cells, and
refuse to connect back to the client. Discovered by "rotor".
Bugfix on 0.2.1.6-alpha.
When we used smartlist_free to free the list of succesful uploads
because we had succeeded in uploading everywhere, we did not actually
set the successful_uploads field to NULL, so later it would get freed
again in rend_service_descriptor_free. Fix for bug 948; bug
introduced in 0.2.1.6-alpha.
svn:r19073
The subversion $Id$ fields made every commit force a rebuild of
whatever file got committed. They were not actually useful for
telling the version of Tor files in the wild.
svn:r17867
Hidden services start out building five intro circuits rather
than three, and when the first three finish they publish a service
descriptor using those. Now we publish our service descriptor much
faster after restart.
svn:r17110
Initial conversion of uint32_t addr to tor_addr_t addr in connection_t and related types. Most of the Tor wire formats using these new types are in, but the code to generate and use it is not. This is a big patch. Let me know what it breaks for you.
svn:r16435
Refactor the router_choose_random_node interface: any function with 10 parameters, most of which are boolean and one of which is unused, should get refactored like this.
svn:r16167
Patch from Christian Wilms: remove (HiddenService|Rend)(Exclude)?Nodes options. They never worked properly, and nobody seems to be using them. Resolves bug 754.
svn:r16144
Add new ExcludeExitNodes option. Also add a new routerset type to handle Exclude[Exit]Nodes. It is optimized for O(1) membership tests, so as to make choosing a random router run in O(N_routers) time instead of in O(N_routers*N_Excluded_Routers).
svn:r16061
Re-tune mempool parametes based on testing on peacetime: use smaller chuncks, free them a little more aggressively, and try very hard to concentrate allocations on fuller chunks. Also, lots of new documentation.
svn:r13484
As planned, rename networkstatus_vote_t to networkstatus_t, now that v3 networkstatuses are working and standard and v2 networkstatuses are obsolete.
svn:r13383
Refactor circuit_launch* functions to take a bitfield of flags rather than 4 separate nonconsecutive flags arguments. Also, note a possible but in circuit_find_to_cannibalize, which seems to be ignoring its purpose argument.
svn:r12948
Try to make hidden service directory lookup functions a bit more efficient: go for fewer O(n) operations, and look at the consensus rather than the routerinfo list.
svn:r12361
Tidy v2 hidden service descriptor format code: fix memory leaks, fix reference problems, note magic numbers, note questions, remove redundant checks, remove a possible stack smashing bug when encoding a descriptor with no protocols supported.
svn:r12255
Add some code to mitigate bug 393: Choose at random from multiple hidden service ports with the same virtport. This allows limited ad-hoc round-robining.
svn:r10398
Make all LD_BUG log messsages get prefixed with "Bug: ". Remove manually-generated "Bug: "s from log-messages. (Apparently, we remembered to add them about 40% of the time.)
svn:r9733
Fix bug 338: log verbose nicknames, not just keys, for intro points. Also, suppress intro point name logging when SafeLogging is 1. (The security part is a possible backport candidate.)
svn:r9041
Apply patch from Mike Perry: add more reasons for circuit destroys. (Slightly tweaked to avoid allocating a number for an "internal" reason.)
svn:r8739
Touch up last patch (to add REASON to CIRC events): make some reasons
more sensible, send reasons only to controllers that have enabled
extended events, and clean up whitespace.
svn:r8672
Disprefer exit nodes for entry, middle positions (fixes bug 200). Also, switch to using a uint64_t to hold "total bandwidth for all nodes" under consideration; crypt_rand_int would have died at 2GB/s network capacity.
svn:r8571
Refactor connection_t into edge, or, dir, control, and base subtypes. This might save some RAM on busy exit servers, but really matters most in terms of correctness.
svn:r6906
No circuit can be both an intro point and a rend point, so we can merge both the cookie and the pk digest into one "rend_token" field for or circuits. This saves another 20 bytes per or circuit.
svn:r6904
circuit_t into origin_circuit_t and or_circuit_t. I fixed some
segaults; there may be more. We still need to move more rendezvous
stuff into subtypes.
This is a trial run for splitting up connection_t; if the approach is
insane, please say so soon so we can do something smarter.
Also, this discards the old HALF_OPEN code, which nobody seems to
want.
svn:r6817
FetchServerDescriptors and FetchHidServDescriptors for whether
to fetch server info and hidserv info or let the controller do it,
and also PublishServerDescriptor and PublishHidServDescriptors.
Add AllDirActionsPrivate undocumented option -- if you set it, you'll
need the controller to bootstrap you enough to build your first circuits.
svn:r6047
