Right now there's a single warn_if_unnamed flag for
router_get_consensus_status_by_nickname() and
node_get_by_nickname(), that is nearly always 1. I've turned it
into an 'unsigned' bitfield, and inverted its sense. I've added the
flags argument to node_get_by_hex_id() too, though it does nothing
there right now.
I've removed the router_get_consensus_status_by_nickname() function,
since it was only used in once place.
This patch changes the warning behavior of GETINFO ns/name/<name>,
since all other name lookups from the controller currently warn.
Later I'm going to add more flags, for ed25519 support.
We need this func so that we recognize SOCKS conns to v3 addresses.
- Also rename rend_valid_service_id() to rend_valid_v2_service_id()
- Also move parse_extended_hostname() tests to their own unittest, and
add a v3 address to the test as well.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This introduces a callback to relaunch a service rendezvous circuit when a
previous one failed to build or expired.
It unifies the legacy function rend_service_relaunch_rendezvous() with one for
specific to prop224. There is now only one entry point for that which is
hs_circ_retry_service_rendezvous_point() supporting both legacy and prop224
circuits.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit refactors the handle_hs_exit_conn() function introduced at a prior
commit that connects the rendezvous circuit to the edge connection used to
connect to the service virtual port requested in a BEGIN cell.
The refactor adds the support for prop224 adding the
hs_service_set_conn_addr_port() function that has the same purpose has
rend_service_set_connection_addr_port() from the legacy code.
The rend_service_set_connection_addr_port() has also been a bit refactored so
the common code can be shared between the two HS subsystems (legacy and
prop224).
In terms of functionallity, nothing has changed, we still close the circuits
in case of failure for the same reasons as the legacy system currently does.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add the entry point from the circuit subsystem of "circuit has opened" which
is for all type of hidden service circuits. For the introduction point, this
commit actually adds the support for handling those circuits when opened and
sending ESTABLISH_INTRO on a circuit.
Rendevzou point circuit aren't supported yet at this commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit adds the functionality for a service to build its descriptor.
Also, a global call to build all descriptors for all services is added to the
service scheduled events.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We need to keep these around for TAP and old-style hidden services,
but they're obsolete, and we shouldn't encourage anyone to use them.
So I've added "obsolete" to their names, and a comment explaining
what the problem is.
Closes ticket 23026.
Try to load or/and generate service keys for v3. This write both the public
and private key file to disk along with the hostname file containing the onion
address.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit adds the support in the HS subsystem for loading a service from a
set of or_options_t and put them in a staging list.
To achieve this, service accessors have been created and a global hash map
containing service object indexed by master public key. However, this is not
used for now. It's ground work for registration process.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add the hs_config.{c|h} files contains everything that the HS subsystem needs
to load and configure services. Ultimately, it should also contain client
functions such as client authorization.
This comes with a big refactoring of rend_config_services() which has now
changed to only configure a single service and it is stripped down of the
common directives which are now part of the generic handler.
This is ground work for prop224 of course but only touches version 2 services
and add XXX note for version 3.
Signed-off-by: David Goulet <dgoulet@torproject.org>
These statistics were largely ununsed, and kept track of statistical information
on things like how many time we had done TLS or how many signatures we had
verified. This information is largely not useful, and would only be logged
after receiving a SIGUSR1 signal (but only if the logging severity level was
less than LOG_INFO).
* FIXES#19871.
* REMOVES note_crypto_pk_op(), dump_pk_op(), and pk_op_counts from
src/or/rephist.c.
* REMOVES every external call to these functions.
circuit_init_cpath_crypto() is responsible for creating the cpath of legacy
SHA1/AES128 circuits currently. We want to use it for prop224 circuits, so we
refactor it to create circuits with SHA3-256 and AES256 as well.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Deprecated in 0.2.9.2-alpha, this commits changes it as OBSOLETE() and cleans
up the code associated with it.
Partially fixes#22060
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove duplicate code that validates a service object which is now in
rend_validate_service().
Add some comments on why we nullify a service in the code path of
rend_config_services().
Signed-off-by: David Goulet <dgoulet@torproject.org>
This new function validates a service object and is used everytime a service
is successfully loaded from the configuration file.
It is currently copying the validation that rend_add_service() also does which
means both functions validate. It will be decoupled in the next commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We do dump HS stats now at log info everytime the intro circuit creation retry
period limit has been reached. However, the log was upgraded to warning if we
actually were over the elapsed time (plus an extra slop).
It is actually something that will happen in tor in normal case. For instance,
if the network goes down for 10 minutes then back up again making
have_completed_a_circuit() return false which results in never updating that
retry period marker for a service.
Fixes#22032
Signed-off-by: David Goulet <dgoulet@torproject.org>
The reason for making the temporary list public is to keep it encapsulated in
the rendservice subsystem so the prop224 code does not have direct access to
it and can only affect it through the rendservice pruning function.
It also has been modified to not take list as arguments but rather use the
global lists (main and temporary ones) because prop224 code will call it to
actually prune the rendservice's lists. The function does the needed rotation
of pointers between those lists and then prune if needed.
In order to make the unit test work and not completely horrible, there is a
"impl_" version of the function that doesn't free memory, it simply moves
pointers around. It is directly used in the unit test and two setter functions
for those lists' pointer have been added only for unit test.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Some of those defines will be used by the v3 HS protocol so move them to a
common header out of rendservice.c. This is also ground work for prop224
service implementation.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Another building blocks for prop224 service work. This also makes the function
takes specific argument instead of the or_option_t object.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Make hidden services with 8 to 10 introduction points check for failed
circuits immediately after startup. Previously, they would wait for 5
minutes before performing their first checks.
Fixes bug 21594; bugfix on commit 190aac0eab in Tor 0.2.3.9-alpha.
Reported by alecmuffett.
Previously, they would stop checking when they exceeded their intro point
creation limit.
Fixes bug 21596; bugfix on commit d67bf8b2f2 in Tor 0.2.7.2-alpha.
Reported by alecmuffett.
Previously, they would stop checking when they exceeded their intro point
creation limit.
Fixes bug 21596; bugfix on commit d67bf8b2f2 in Tor 0.2.7.2-alpha.
Reported by alecmuffett.
When encoding a legacy ESTABLISH_INTRO cell, we were using the sizeof() on a
pointer instead of using the real size of the destination buffer leading to an
overflow passing an enormous value to the signing digest function.
Fortunately, that value was only used to make sure the destination buffer
length was big enough for the key size and in this case it always was because
of the overflow.
Fixes#21553
Signed-off-by: David Goulet <dgoulet@torproject.org>
Bug 21242 occurred because we asserted that extend_info_from_node()
had succeeded...even though we already had the code to handle such a
failure. We fixed that in 93b39c5162.
But there were four other cases in our code where we called
extend_info_from_node() and either tor_assert()ed that it returned
non-NULL, or [in one case] silently assumed that it returned
non-NULL. That's not such a great idea. This patch makes those
cases check for a bug of this kind instead.
Fixes bug 21372; bugfix on 0.2.3.1-alpha when
extend_info_from_node() was introduced.
Once a second, we go over all services and consider the validity of the intro
points. Now, also try to remove expiring nodes that have no more circuit
associated to them. This is possible if we moved an intro point object
previously to that list and the circuit actually timed out or was closed by
the introduction point itself.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In rend_service_intro_has_opened(), this is subject to a possible underflow
because of how the if() casts the results. In the case where the expiring
nodes list length is bigger than the number of IP circuits, we end up in the
following situation where the result will be cast to an unsigned int. For
instance, "5 - 6" is actually a BIG number.
Ultimately leading to closing IP circuits in a non stop loop.
Partially fixes#21302.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In rend_consider_services_intro_points(), we had a possible interger underflow
which could lead to creating a very large number of intro points. We had a
safe guard against that *except* if the expiring_nodes list was not empty
which is realistic thing.
This commit removes the check on the expiring nodes length being zero. It's
not because we have an empty list of expiring nodes that we don't want to open
new IPs. Prior to this check, we remove invalid IP nodes from the main list of
a service so it should be the only thing to look at when deciding if we need
to create new IP(s) or not.
Partially fixes#21302.
Signed-off-by: David Goulet <dgoulet@torproject.org>
An operator couldn't set the number of introduction point below the default
value which is 3. With this commit, from 0 to the hardcoded maximum is now
allowed.
Closes#21033
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 8a0ea3ee43 we added a
temp_service_list local variable to rend_config_services, but we
didn't add a corresponding "free" for it to all of the exit paths.
Fixes bug 20987; bugfix on 0.3.0.1-alpha.
First, this commit moves the code used to prune the service list when
reloading Tor (HUP signal for instance) to a function from
rend_config_services().
Second, fix bug #21054, improve the code by using the newly added
circuit_get_next_service_intro_circ() function instead of poking at the global
list directly and add _many_ more comments.
Fixes#21054.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This resolves two issues:
* the checks in rend_add_services were only being performed when adding
the service, and not when the service was validated,
(this meant that duplicate checks were not being performed, and some SETCONF
commands appeared to succeed when they actually failed), and
* if one service failed while services were being added, then the service
list would be left in an inconsistent state (tor dies when this happens,
but the code is cleaner now).
Fixes#20860.
Instead, refuse to start tor until the misconfigurations have been corrected.
Fixes bug 20559; bugfix on multiple commits in 0.2.7.1-alpha and earlier.
Instead, refuse to start tor if any hidden service key has been used in
a different hidden service anonymity mode.
Fixes bug 20638; bugfix on 17178 in 0.2.9.3-alpha; reported by ahf.
The original single onion service poisoning code checked poisoning state
in options_validate, and poisoned in options_act. This was problematic,
because the global array of hidden services had not been populated in
options_validate (and there were ordrering issues with hidden service
directory creation).
This patch fixes this issue in rend_service_check_dir_and_add, which:
* creates the directory, or checks permissions on an existing directory, then
* checks the poisoning state of the directory, then
* poisons the directory.
When validating, only the permissions checks and the poisoning state checks
are perfomed (the directory is not modified).
This patch doesn't cover every case; omitted cases are marked with
"XXXX prop271", as usual. It leaves both the old interface and the
new interface for guard status notification, since they don't
actually work in the same way: the new API wants to be told when a
circuit has failed or succeeded, whereas the old API wants to know
when a channel has failed or succeeded.
I ran into some trouble with directory guard stuff, since when we
pick the directory guard, we don't actually have a circuit to
associate it with. I solved that by allowing guard states to be
associated with directory connections, not just circuits.
(We only create HS directories if we are acting on the config.)
Log a BUG warning if the directories aren't present immediately before they
are used, then fail.
In order to implement proposal 224, we need the data structure rend_data_t to
be able to accomodate versionning that is the current version of hidden
service (2) and the new version (3) and future version.
For that, we implement a series of accessors and a downcast function to get
the v2 data structure. rend_data_t becomes a top level generic place holder.
The entire rend_data_t API has been moved to hs_common.{c|h} in order to
seperate code that is shared from between HS versions and unshared code (in
rendcommon.c).
Closes#19024
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
(Also, refactor the code to create a hidden service directory into a
separate funcion, so we don't have to duplicate it.)
Fixes bug 20484; bugfix on 0.2.9.3-alpha.
Use the following coccinelle script to change uses of
smartlist_add(sl, tor_strdup(str)) to
smartlist_add_strdup(sl, string) (coccinelle script from nickm
via bug 20048):
@@
expression a;
expression b;
@@
- smartlist_add
+ smartlist_add_strdup
(a,
- tor_strdup(
b
- )
)
