(We allowed it previously, but produced an LD_BUG message when it
happened, which is not consistent
Also, remove inconsistent NULL checks before calling
rend_service_intro_free.
(Removing the check is for CID 718613)
Coverity doesn't like doing NULL checks on things that can't be
NULL; I like checking things where the logic for their not being
NULL is nontrivial. Let's compromise, and make it obvious that this
field can't be NULL.
[Coverity CID 202004]
Coverity thinks that when we do "double x = int1/int2;", we probably
meant "double x = ((double)int1) / int2;". In these cases, we
didn't.
[Coverity CID 1232089 and 1232090]
Previously, we had documented it to return -1 or 0, when in fact
lseek returns -1 or the new position in the file.
This is harmless, since we were only checking for negative values
when we used tor_fd_seekend.
Two bugs here:
1) We didn't add EXTEND2/EXTENDED2 to relay_command_to_string().
2) relay_command_to_string() didn't log the value of unrecognized
commands.
Both fixed here.
This will fix the warning
"/src/or/config.c:6854:48: error: unused parameter 'group_readable'"
that I introduced while fixing 12864.
Bug not in any released version of Tor.
Implements proposal 215; closes ticket 10163.
Why? From proposal 215:
Consensus method 1 is no longer viable for the Tor network. It
doesn't result in a microdescriptor consensus, and omits other
fields that clients need in order to work well. Consensus methods
under 12 have security issues, since they let a single authority
set a consensus parameter.
...
For example, while Tor 0.2.4.x is under development, authorities
should really not be running anything before Tor 0.2.3.x. Tor
0.2.3.x has supported consensus method 13 since 0.2.3.21-rc, so
it's okay for 0.2.4.x to require 13 as the minimum method. We even
might go back to method 12, since the worst outcome of not using 13
would be some warnings in client logs. Consensus method 12 was a
security improvement, so we don't want to roll back before that.
When we merged the cookieauthfile creation logic in 33c3e60a37, we
accidentally took out this feature. Fixes bug 12864, bugfix on
0.2.5.1-alpha.
Also adds an ExtORPortCookieAuthFileGroupReadable, since there's no
reason not to.
I looked for other places where we set circ->n_chan early, and found
one in circuit_handle_first_hop() right before it calls
circuit_send_next_onion_skin(). If onion_skin_create() fails there,
then n_chan will still be set when circuit_send_next_onion_skin()
returns. We should probably fix that too.
When Tor starts with DisabledNetwork set, it would correctly
conclude that it shouldn't try making circuits, but it would
mistakenly cache this conclusion and continue believing it even
when DisableNetwork is set to 0. Fixes the bug introduced by the
fix for bug 11200; bugfix on 0.2.5.4-alpha.
Those used to be normal to receive on hidden service circuits due to bug
1038, but the buggy Tor versions are long gone from the network so we
can afford to resume watching for them. Resolves the rest of bug 1038;
bugfix on 0.2.1.19.
Roger spotted this on tor-dev in his comments on proposal 221.
(Actually, detect DESTROY vs everything else, since arma likes
network timeout indicating failure but not overload indicating failure.)
This function is supposed to construct a list of all the ciphers in
the "v2 link protocol cipher list" that are supported by Tor's
openssl. It does this by invoking ssl23_get_cipher_by_char on each
two-byte ciphersuite ID to see which ones give a match. But when
ssl23_get_cipher_by_char cannot find a match for a two-byte SSL3/TLS
ciphersuite ID, it checks to see whether it has a match for a
three-byte SSL2 ciphersuite ID. This was causing a read off the end
of the 'cipherid' array.
This was probably harmless in practice, but we shouldn't be having
any uninitialized reads.
(Using ssl23_get_cipher_by_char in this way is a kludge, but then
again the entire existence of the v2 link protocol is kind of a
kludge. Once Tor 0.2.2 clients are all gone, we can drop this code
entirely.)
Found by starlight. Fix on 0.2.4.8-alpha. Fixes bug 12227.
Authorities now assign the Guard flag to the fastest 25% of the
network (it used to be the fastest 50%). Also raise the consensus
weight that guarantees the Guard flag from 250 to 2000. For the
current network, this results in about 1100 guards, down from 2500.
This step paves the way for moving the number of entry guards
down to 1 (proposal 236) while still providing reasonable expected
performance for most users.
Implements ticket 12690.
Found because LibreSSL has OPENSSL_NO_COMP always-on, but this
conflicts with the way that _we_ turn off compression. Patch from
dhill, who attributes it to "OpenBSD". Fixes bug 12602; bugfix on
0.2.1.1-alpha, which introduced this turn-compression-off code.
The extra \ is harmless, but mildly unpleasant.
Fixes 12392; bugfix on 0.2.2.25-alpha where we started using
GetTempDir(). Based on a patch by Gisle Vanem.
Otherwise, it always seems as though our Exclude* options have
changed, since we're comparing modified to unmodified values.
Patch from qwerty1. Fixes bug 9801. Bugfix on 0.2.4.10-alpha, where
GeoIPExcludeUnknown was introduced.
Currently tor fails to build its test when enabled with bufferevents
because an #ifndef USE_BUFFEREVENTS hides bucket_millis_empty() and
friends. This is fine if we don't run tests, but if we do, we need
these functions in src/or/libtor-testing.a when linking src/test/test.
This patch moves the functions outside the #ifndef and exposes them.
See downstream bug:
https://bugs.gentoo.org/show_bug.cgi?id=510124
When we run into bug 8387 (if we run into it again), report when we
last called circuit_expire_old_circuits_clientside(). This will let
us know -- if my fix for 8387 doesn't work -- whether my diagnosis
was at least correct.
Suggested by Andrea.
On a non-blocking pipe fgets sets EAGAIN when it encounters partial lines. No
error is set on full lines or EOF. EOF is reached when the writing end of the
pipe is closed. Partial lines and full lines are both returned by fgets, EOF
results in NULL.
Mention of this behaviour can be found in #1903 and #2045.
We should only assign a relay the HSDir flag if it is currently
considered valid. We can accomplish this by only considering active
relays, and as a consequence of this we also exclude relays that are
currently hibernating. Fixes#12573
Long ago we supported systems where there was no support for
threads, or where the threading library was broken. We shouldn't
have do that any more: on every OS that matters, threads exist, and
the OS supports running threads across multiple CPUs.
This resolves tickets 9495 and 12439. It's a prerequisite to making
our workqueue code work better, since sensible workqueue
implementations don't split across multiple processes.
The variable was useless since it was only toggled off in disabled code.
If the 'exit_family' smartlist is empty, we don't consider exit family
anyway.
The fix for bug 8746 added a hashtable instance that never actually
invoked HT_FIND. This caused a warning, since we didn't mark HT_FIND
as okay-not-to-use.
Try killing a running process; try noticing that a process has
exited without checking its output; verify that waitpid_cb (when
present) is set to NULL when you would expect it to be.
When we create a process yourself with CreateProcess, we get a
handle to the process in the PROCESS_INFO output structure. But
instead of using that handle, we were manually looking up a _new_
handle based on the process ID, which is a poor idea, since the
process ID might refer to a new process later on, but the handle
can't.
This lets us avoid sending SIGTERM to something that has already
died, since we realize it has already died, and is a fix for the
unix version of #8746.
Check for consistency between the queued destroy cells and the marked
circuit IDs. Check for consistency in the count of queued destroy
cells in several ways. Check to see whether any of the marked circuit
IDs have somehow been marked longer than the channel has existed.
And add a comment about why conditions that would cause us to drop a
cell should get checked before actions that would cause us to send a
destroy cell.
Spotted by 'cypherpunks'.
And note that these issues have been present since 0.0.8pre1 (commit
0da256ef), where we added a "shutting down" state, and started
responding to all create cells with DESTROY when shutting down.
Conflicts:
src/or/channel.c
src/or/circuitlist.c
src/or/connection.c
Conflicts involved removal of next_circ_id and addition of
unusable-circid tracking.
The point of the "idle timeout" for connections is to kill the
connection a while after it has no more circuits. But using "last
added a non-padding cell" as a proxy for that is wrong, since if the
last circuit is closed from the other side of the connection, we
will not have sent anything on that connection since well before the
last circuit closed.
This is part of fixing 6799.
When applied to 0.2.5, it is also a fix for 12023.
Instead of killing an or_connection_t that has had no circuits for
the last 3 minutes, give every or_connection_t a randomized timeout,
so that an observer can't so easily infer from the connection close
time the time at which its last circuit closed.
Also, increase the base timeout for canonical connections from 3
minutes to 15 minutes.
Fix for ticket 6799.
When we find a stranded one-hop circuit, log whether it is dirty,
log information about any streams on it, and log information about
connections they might be linked to.
This function is supposed to construct a list of all the ciphers in
the "v2 link protocol cipher list" that are supported by Tor's
openssl. It does this by invoking ssl23_get_cipher_by_char on each
two-byte ciphersuite ID to see which ones give a match. But when
ssl23_get_cipher_by_char cannot find a match for a two-byte SSL3/TLS
ciphersuite ID, it checks to see whether it has a match for a
three-byte SSL2 ciphersuite ID. This was causing a read off the end
of the 'cipherid' array.
This was probably harmless in practice, but we shouldn't be having
any uninitialized reads.
(Using ssl23_get_cipher_by_char in this way is a kludge, but then
again the entire existence of the v2 link protocol is kind of a
kludge. Once Tor 0.2.2 clients are all gone, we can drop this code
entirely.)
Found by starlight. Fix on 0.2.4.8-alpha. Fixes bug 12227.
This code mis-handled the case where a circuit got the same circuit
ID in both directions. I found three instances of it in the
codebase, by grepping for [pn]_circ_id.
Because of the issue in command_process_relay_cell(), this would
have made roughly one circuit in a million completely nonfunctional.
Fixes bug 12195.
On some profiles of Andrea's from #11332, I found that a great deal
of time can still be attributed to functions called from
update_router_have_minimum_dir_info(). This is making our
digestmap, tor_memeq, and siphash functions take a much bigger
portion of runtime than they really should.
If we're calling update_router_have_minimum_dir_info() too often,
that's because we're calling router_dir_info_changed() too often.
And it looks like most of the callers of router_dir_info_changed()
are coming as tail-calls from router_set_status() as invoked by
channel_do_open_actions().
But we don't need to call router_dir_info_changed() so much! (I'm
not quite sure we need to call it from here at all, but...) Surely
we don't need to call it from router_set_status when the router's
status has not actually changed.
This patch makes us call router_dir_info_changed() from
router_set_status only when we are changing the router's status.
Fix for bug 12170. This is leftover from our fix back in 273ee3e81
in 0.1.2.1-alpha, where we started caching the value of
update_router_have_minimum_dir_info().
tor_memeq has started to show up on profiles, and this is one of the
most frequent callers of that function, appearing as it does on every
cell handled for entry or exit.
59f9097d5c introduced tor_memneq here;
it went into Tor 0.2.1.31. Fixes part of 12169.
Without this fix, when running with bridges, we would try fetching
directory info far too early, and have up to a 60 second delay if we
started with bridge descriptors available.
Fixes bug 11965. Fix on 0.2.3.6-alpha, arma thinks.
The old cache had problems:
* It needed to be manually preloaded. (It didn't remember any
address you didn't tell it to remember)
* It was AF_INET only.
* It looked at its cache even if the sandbox wasn't turned on.
* It couldn't remember errors.
* It had some memory management problems. (You can't use memcpy
to copy an addrinfo safely; it has pointers in.)
This patch fixes those issues, and moves to a hash table.
Fixes bug 11970; bugfix on 0.2.5.1-alpha.
The code was not disambiguating ClientTransportPlugin configured and
not used, and ClientTransportPlugin configured, but in a failed state.
The right thing to do is to undo moving the get_transport_by_addrport()
call back into get_proxy_addrport(), and remove and explicit check for
using a Bridge since by the time the check is made, if a Bridge is
being used, it is PT/proxy-less.
This change allows using Socks4Proxy, Socks5Proxy and HTTPSProxy with
ClientTransportPlugins via the TOR_PT_PROXY extension to the
pluggable transport specification.
This fixes bug #8402.
These are needed under some circumstances if we are running with
expensive-hardening and sandbox at the same time.
fixes 11477, bugfix on 0.2.5.4-alpha (where we introduced
expensive-hardening)
None of the things we might exec() can possibly run under the
sanbox, so rather than crash later, we have to refuse to accept the
configuration nice and early.
The longer-term solution is to have an exec() helper, but wow is
that risky.
fixes 12043; bugfix on 0.2.5.1-alpha
When we converted the horrible set of options that previously
controlled "use ORPort or DirPort? Anonymously or Non-anonymouly?" to
a single 'indirection' argument, we missed
directory_post_to_dirservers.
The problematic code was introduced in 5cbeb6080, which went into
0.2.4.3-alpha. This is a fix for bug 11469.
If somebody has configured a client to use a bridge without setting
an identity digest (not recommended), learn the identity digest from
whatever bridge descriptor we have downloaded or have in our cache.
When running with User set, we frequently try to look up our
information in the user database (e.g., /etc/passwd). The seccomp2
sandbox setup doesn't let us open /etc/passwd, and probably
shouldn't.
To fix this, we have a pair of wrappers for getpwnam and getpwuid.
When a real call to getpwnam or getpwuid fails, they fall back to a
cached value, if the uid/gid matches.
(Granting access to /etc/passwd isn't possible with the way we
handle opening files through the sandbox. It's not desirable either.)
On OpenBSD 5.4, time_t is a 32-bit integer. These instances contain
implicit treatment of long and time_t as comparable types, so explicitly
cast to time_t.
These are actually tests for #311. It appears to me that we didn't
fix#311 properly when we thought we did in 475eb5d6; instead, the
real fix was 05eff35ac6, a few minutes earlier.
