Otherwise integer overflows can happen. Remember, doing a i32xi32
multiply doesn't actually produce a 64-bit output. You need to do
i64xi32 or i64xi64.
Coverity found this as CID 1417753
Each type of scheduler implements its own static scheduler_t object and
returns a reference to it.
This commit also makes it a const pointer that is it can only change inside
the scheduler type subsystem but not outside for extra protection.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead, add wrappers to do the needed action the different scheduler needs
with the libevent object.
Signed-off-by: David Goulet <dgoulet@torproject.org>
A channel can bounce in the scheduler and bounce out with the IDLE state which
means that if it came in the scheduler once, it has socket information that
needs to be freed from the global hash table.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This option is a list of possible scheduler type tor can use ordered by
priority. Its default value is "KIST,KISTLite,Vanilla" which means that KIST
will be used first and if unavailable will fallback to KISTLite and so on.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is possible that tor was compiled with KIST support but the running kernel
has no support for it. In that case, fallback to a naive approach and flag
that we have no kernel support.
At this commit, if the kernel support is disabled, there are no ways to come
back from it other than restarting tor with a kernel that supporst KIST.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add a detection for the KIST scheduler in our build system and set
HAVE_KIST_SUPPORT if available.
Adapt the should use kist function with this new compile option.
Signed-off-by: David Goulet <dgoulet@torproject.org>
- HT_FOREACH_FN defined in an additional place because nickm did that
in an old kist prototype
- Make channel_more_to_flush mockable for future sched tests
- Add empty scheduler_{vanilla,kist}.c files and put in include.am
Signed-off-by: David Goulet <dgoulet@torproject.org>
- massive change to src/tgest/test_options.c since the sched options
were added all over the place in it
- removing the sched options caused some tests to pass/fail in new ways
so I assumed current behavior is correct and made them pass again
- ex: "ConnLimit must be greater" lines
- ex: "Authoritative directory servers must" line
- remove test_options_validate__scheduler in prep for new sched tests
Signed-off-by: David Goulet <dgoulet@torproject.org>
An unnecessary routerlist check in the NETINFO clock skew detection in
channel_tls_process_netinfo_cell() was preventing clients from
reporting NETINFO clock skew to controllers.
This patch replaces a few calls to router_get_by_id_digest ("do we
have a routerinfo?") with connection_or_digest_is_known_relay ("do
we know this relay to be in the consensus, or have been there some
time recently?").
Found while doing the 21585 audit; fixes bug 23533. Bugfix on
0.3.0.1-alpha.
The memleak was occuring because of the way ExcludeNodes is handled in
that function. Basically, we were putting excluded intro points extend
infos in a special variable which was never freed. Also, if there were
multiple excluded intro points then that variable was overwritten
everytime leaking more memory. This commit should fix both issues.
This commit adds a pretty advanced test for the client-side making sure that
picking intro is done properly.
This unittest also reveals a memleak on the client_pick_intro() function which
is fixed by the subsequent commit.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Using a test vector in python, test both hs_build_hsdir_index() and
hs_build_hs_index().
This commit also adds the hs_build_address.py to EXTRA_DIST which was missing.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Do two major improvements:
a) Make the client pick 6 HSDirs instead of just 1 and make sure they
all match the service's HSDirs.
b) Test two additional missing scenarios borrowed from the
test_reachability() test.
Make download status next attempts reported over the control port
consistent with the time used by tor. This issue only occurs if a
download status has not been reset before it is queried over the
control port.
Fixes 23525, not in any released version of tor.
If future code asks if there are any running bridges, without checking
if bridges are enabled, log a BUG warning rather than crashing.
Fixes 23524 on 0.3.0.1-alpha
Change the contract of control_event_bootstrap_problem() to be more
general and to take a connection_t. New function
control_event_bootstrap_prob_or() has the specific or_connection_t
funcionality previously used.
Fix the test_build_address() test and its test vectors python script.
They were both using a bogus pubkey for building an HS address which
does not validate anymore.
Also fix a few more unittests that were using bogus onion addresses
and were failing the validation. I replaced the bogus address with
the one generated from the test vector script.
Directory servers now include a "Date:" http header for response
codes other than 200. Clients starting with a skewed clock and a
recent consensus were getting "304 Not modified" responses from
directory authorities, so without a Date header the client would
never hear about a wrong clock.
Fixes bug 23499; bugfix on 0.0.8rc1.
We enrich the test_client_cache() test in two ways:
a) We check that transitioning time periods also cleans up expired
descriptors in client memory.
b) We test hs_cache_lookup_as_client() instead of
lookup_v3_desc_as_client(). The former is a higher level function
which calls the latter and allows us to test deeper into the
subsystem.
In #23466 we discovered that cached descriptors can stay around on the
client-side for up to 72 hours. In reality we only want those descs to
get cached for the duration of the current time period, since after that
TP is gone the client needs to compute a new blinded key to use for the HS.
In this commit we start using the consensus time (if available) when
cleaning up cached client descriptor entries. That makes sense because
the client uses consensus time anyway for connecting to hidden
services (e.g. computing blinded keys and time periods).
If no recent consensus is available, we consider descriptors to be
expired since we will want to fetch new ones when we get a live
consensus to avoid the Roger bug. If we didn't do that, when Roger
desuspends his laptop there would be a race between Tor fetching a new
consensus, and Tor connecting to the HS which would still cause
reachability issues.
We also turned a rev counter check into a BUG, since we should never
receive a descriptor with a strictly smaller rev counter than the one we
already have, except if there is a bug or if the HSDir wants to mess
with us. In any case, let's turn this into a BUG so that we can detect
and debug such cases easily.
This change refactors find_dl_schedule() to only call dependent functions
as needed. In particular, directory_fetches_from_authorities() only needs
to be called on clients.
Stopping spurious directory_fetches_from_authorities() calls on every
download on public relays has the following impacts:
* fewer address resolution attempts, particularly those mentioned in 21789
* fewer descriptor rebuilds
* fewer log messages, particularly those limited in 20610
Fixes 23470 in 0.2.8.1-alpha.
The original bug was introduced in commit 35bbf2e as part of prop210.
OpenBSD doesn't like tricks where you use a too-wide sscanf argument
for a too-narrow array, even when you know the input string
statically. The fix here is just to use bigger buffers.
Fixes 15582; bugfix on a3dafd3f58 in 0.2.6.2-alpha.
But when clients are just starting, make them try each bridge a few times
before giving up on it.
These changes make the bridge download schedules more explicit: before
17750, they relied on undocumented behaviour and specific schedule
entries. (And between 17750 and this fix, they were broken.)
Fixes 23347, not in any released version of tor.
We were always incrementing bridge download statuses on each attempt,
but we were using the "increment on failure" functions to do it.
And we never incremented them on failure.
No behaviour change.
The download schedule tells Tor to wait 15 minutes before downloading
bridge descriptors. But 17750 made Tor ignore that and start immediately.
Since we fixed 17750, Tor waits 15 minutes for bridge client bootstrap,
like the schedule says.
This fixes the download schedule to start immediately, and to try each
bridge 3 times in the first 30 seconds. This should make bridge bootstraps
more reliable.
Fixes 23347.
It is possible that two descriptor upload requests are launched in a very
short time frame which can lead to the second request finishing before the
first one and where that first one will make the HSDir send back a 400
malformed descriptor leading to a warning.
To avoid such, cancel all active directory connections for the specific
descriptor we are about to upload.
Note that this race is still possible on the HSDir side which triggers a log
info to be printed out but that is fine.
Fixes#23457
Signed-off-by: David Goulet <dgoulet@torproject.org>
When option validation or transition is happening, there are no
"current options" -- only "old options" and "maybe new options".
Looking at get_options() is likely a mistake, so have a nonfatal
assertion let us know if we do that.
Closes 22281.
Because we can get a RENDEZVOUS2 cell before the INTRODUCE_ACK, we need to
correctly handle the circuit purpose REND_JOINED that is not change its
purpose when we get an INTRODUCE_ACK and simply close the intro circuit
normally.
Fixes#23455
Signed-off-by: David Goulet <dgoulet@torproject.org>
This test is important because it tests that upload_descriptor_to_all()
is in synch with pick_hsdir_v3(). That's not the case for the
reachability test which just compares the responsible hsdir sets.
There was a bug in upload_descriptor_to_all() where we picked between
first and second hsdir index based on which time segment we are. That's
not right and instead we should be uploading our two descriptors using a
different hsdir index every time. That is, upload first descriptor using
first hsdir index, and upload second descriptor using second hdsir index.
Also simplify stuff in pick_hdsir_v3() since that's only used to fetch
descriptors and hence we can just always use the fetch hsdir index.
Because of the latest changes on when we rotate, longer lifetime of
descriptors and no more overlap period, the tests needed to be improved to
test more functionnalities.
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, this fixes#23372.
Second, the consensus timings for the build descriptor have been changed to
the current test can pass. More extensive tests of descriptor rotation are
coming in a commit near you because the rotation and time period logic has
been changed.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is a large and important unit test for the hidden service version
3! It tests the service reachability for a client using different
consensus timings and makes sure that the computed hashring is the same
on both side so it is actually reachable.
Signed-off-by: David Goulet <dgoulet@torproject.org>
With the latest change on how we use the HSDir index, the client and service
need to pick their responsible HSDir differently that is depending on if they
are before or after a new time period.
The overlap mode is active function has been renamed for this and test added.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because of #23387, we've realized that there is one scenario that makes
the client unable to reach the service because of a desynch in the time
period used. The scenario is as follows:
+------------------------------------------------------------------+
| |
| 00:00 12:00 00:00 12:00 00:00 12:00 |
| SRV#1 TP#1 SRV#2 TP#2 SRV#3 TP#3 |
| |
| $==========|-----------$===========|-----------$===========| |
| ^ ^ |
| C S |
+------------------------------------------------------------------+
In this scenario the HS has a newer consensus than the client, and the
HS just moved to the next TP but the client is still stuck on the old
one. However, the service is not in any sort of overlap mode so it
doesn't cover the old TP anymore, so the client is unable to fetch a
descriptor.
We've decided to solve this by extending the concept of overlap period
to be permanent so that the service always publishes two descriptors and
aims to cover clients with both older and newer consensuses. See the
spec patch in #23387 for more details.
Based on our #23387 findings, it seems like to maintain 24/7
reachability we need to employ different logic when computing hsdir
indices for fetching vs storing. That's to guarantee that the client
will always fetch the current descriptor, while the service will always
publish two descriptors aiming to cover all possible edge cases.
For more details see the next commit and the spec branch.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The pruning process and the deleting ephemeral service function iterates over
all circuits and were asserting on rend_data for a matching circuit. This is
not good because now we have v3 circuits without a rend_data.
Fixes#23429
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the valid_after time from the consensus to get the time period number else
we might get out of sync with the overlap period that uses valid_after.
Make it an optional feature since some functions require passing a
specific time (like hs_get_start_time_of_next_time_period()).
Signed-off-by: David Goulet <dgoulet@torproject.org>
Undeprecate it;
rename it to TestingClientDNSRejectInternalAddresses;
add the old name as an alias;
reject configurations where it is set but TestingTorNetwork is not;
change the documentation accordingly.
Closes tickets 21031 and 21522.
Version 3 hidden service needs rendezvous point that have the protocol version
HSRend >= 2 else the rendezvous cells are rejected.
Fixes#23361
Signed-off-by: David Goulet <dgoulet@torproject.org>
There are two reasons this is likeliest to happen -- no kernel
support, and some bug in Tor. We'll ask people to check the former
before they report. Closes 23090.
The chdir() call in RunAsDaemon makes the behavior here surprising,
and either way of trying to resolve the surprise seems sure to
startle a significant fraction of users. Instead, let's refuse to
guess, and refuse these configurations.
Closes ticket 22731.
I'm doing this using the Proxy-Authorization: header to support
clients that understand it, and with a new tor-specific header that
makes more sense for our use.
By convention, a function that frobs a foo_t should be called
foo_frob, and it should have a foo_t * as its first argument. But
for many of the buf_t functions, the buf_t was the final argument,
which is silly.
Our convention is that functions which manipulate a type T should be
named T_foo. But the buffer functions were super old, and followed
all kinds of conventions. Now they're uniform.
Here's the perl I used to do this:
\#!/usr/bin/perl -w -i -p
s/read_to_buf\(/buf_read_from_socket\(/;
s/flush_buf\(/buf_flush_to_socket\(/;
s/read_to_buf_tls\(/buf_read_from_tls\(/;
s/flush_buf_tls\(/buf_flush_to_tls\(/;
s/write_to_buf\(/buf_add\(/;
s/write_to_buf_compress\(/buf_add_compress\(/;
s/move_buf_to_buf\(/buf_move_to_buf\(/;
s/peek_from_buf\(/buf_peek\(/;
s/fetch_from_buf\(/buf_get_bytes\(/;
s/fetch_from_buf_line\(/buf_get_line\(/;
s/fetch_from_buf_line\(/buf_get_line\(/;
s/buf_remove_from_front\(/buf_drain\(/;
s/peek_buf_startswith\(/buf_peek_startswith\(/;
s/assert_buf_ok\(/buf_assert_ok\(/;
This lets us drop the testing-only function buf_get_first_chunk_data(),
and lets us implement proto_http and proto_socks without looking at
buf_t internals.
The service needs the latest SRV and set of relays for the best accurate
hashring to upload its descriptor to so it needs a live consensus thus don't
do anything until we have it.
Fixes#23331
Signed-off-by: David Goulet <dgoulet@torproject.org>
When merging #20657, somehow hs_service_dir_info_changed() became unused
leading to not use the re-upload to HSDir when we were missing information
feature.
Turns out that it is not possible to pick an HSDir with a missing descriptor
because in order to compute the HSDir index, the descriptor is mandatory to
have so we can know its position on the hashring.
This commit removes that dead feature and fix the
hs_service_dir_info_changed() not being used.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Based on questions and comments from dgoulet, I've tried to fill
in the reasoning about why these functions work in the way that they
do, so that it will be easier for future programmers to understand
why this code exists and works the way it does.
We used to check if it was set to 0 which is what unused circuit have but when
the rendezvous circuit was cannibalized, the timestamp_dirty is not 0 but we
still need to reset it so we can actually use it without having the chance of
expiring the next second (or very soon).
Fixes#23123
Signed-off-by: David Goulet <dgoulet@torproject.org>
The function was never returning an error code on failure to parse the
OutboundAddress* options.
In the process, it was making our test_options_validate__outbound_addresses()
not test the right thing.
Fixes#23366
Signed-off-by: David Goulet <dgoulet@torproject.org>
This fixes a serious bug in our hsdir set change logic:
We used to add nodes in the list of previous hsdirs everytime we
uploaded to a new hsdir and we only cleared the list when we built a new
descriptor. This means that our prev_hsdirs list could end up with 7
hsdirs, if for some reason we ended up uploading our desc to 7 hsdirs
before rebuilding our descriptor (e.g. this can happen if the set of
hsdirs changed).
After our previous hdsir set had 7 nodes, then our old algorithm would
always think that the set has changed since it was comparing a smartlist
with 7 elements against a smartlist with 6 elements.
This commit fixes this bug, by clearning the prev_hsdirs list before we
upload to all hsdirs. This makes sure that our prev_hsdirs list always
contains the latest hsdirs!
Our logic for detecting hsdir set changes was needlessly compicated: we
had to sort smartlists and compare them.
Instead, we can simplify things by employing the following logic:
"We should reupload our descriptor if the latest HSDir set contains
nodes that were not previously there"
Since we can't be sure that we can unlink enough files on windows
here, let's let the number of permitted entries grow huge if it
really must.
We do this by letting the storagedir hold lots of entries, but still
trying to keep the number of entries under the configured limit. We
also have to tell consdiffmgr not to freak out if it can't actually
remove enough entries.
Part of a fix for bug 22752
Some parentheses were missing making the rend_max_intro_circs_per_period()
return a lower value than it was suppose to.
The calculation is that a service at most will open a number of intro points
that it wants which is 3 by default or HiddenServiceNumIntroductionPoints. Two
extra are launched for performance reason. Finally, this can happen twice for
two descriptors for the current and next time period.
From:
2 * n_intro_wanted + 2
...which resulted in 8 for 3 intro points, this commit fixes it to:
(n_intro_wanted + 2) * 2
... resulting in 12 possible intro point circuit which is the correct maximum
intro circuit allowed per period.
Last, this commit rate limits the the log message if we ever go above that
limit else over a INTRO_CIRC_RETRY_PERIOD, we can print it often!
Fixes#22159
Signed-off-by: David Goulet <dgoulet@torproject.org>
Since ssize_t is signed and might be 64 bits, we should use
tt_i64_op to make sure it's positive. Otherwise, if it is negative,
and we use tt_u64_op, we'll be treating it as a uint64_t, and we
won't detect negative values.
This fixes CID 1416338 and 1416339. Bug not in any released Tor.
That check was wrong:
a) We should be making sure that the size of `key` is big enough before
proceeding, since that's the buffer that we would overread with the
tor_memeq() below.
The old check used to check that `req_key_str` is big enough which is
not right, since we won't read deep into that buffer.
The new check makes sure that `key` has enough size to survive the
tor_memeq(), and if not it moves to the next element of the strmap.
b) That check shouldn't be a BUG since that strmap contains
variable-sized elements and we should not be bugging out if we happen
to compare a small sized element (v2) to a bigger one (v3).
