There is other code that uses this value, and some of it is
apparently reachable from inside router_dir_info_changed(), which
routerlist_free() apparently calls. (ouch!) This is a minimal fix
to try to resolve the issue without causing other problems.
Fixes bug 31003. I'm calling this a bugfix on 0.1.2.2-alpha, where
the call to router_dir_info_changed() was added to routerlist_free().
Replace the 157 fallbacks originally introduced in Tor 0.3.5.6-rc
in December 2018 (of which ~122 were still functional), with a
list of 148 fallbacks (70 new, 78 existing, 79 removed) generated
in June 2019.
Closes ticket 28795.
Note that we created extra lists from DE and US, but they didn't add
any more fallbacks when we tried to merge them.
When we consider all circuits in "waiting for guard" state to be promoted to
an "open" state, we were considering all circuits, even the one marked for
close.
This ultiamtely triggers a "circuit_has_opened()" called on the circuit that
is marked for close which then leads to possible undesirable behaviors within
a subsystem.
For instance, the HS subsystem would be unable to find the authentication key
of the introduction point circuit leading to a BUG() warning and a duplicate
mark for close on the circuit.
This commit also adds a unit test to make sure we never select marked for
close circuits when upgrading its guard state from waiting for guard to open.
Fixes#30871
Signed-off-by: David Goulet <dgoulet@torproject.org>
Skip test_rebind when the TOR_SKIP_TEST_REBIND environmental variable
is set.
Skip test_rebind on macOS in Travis builds, because it is unreliable
on macOS on Travis.
Fixes bug 30713; bugfix on 0.3.5.1-alpha.
Leave the other rend and hs_ident data around until circuit free, since code
may still try to inspect it after marking the circuit for close. The
circuitmap is the important thing to clean up, since repurposed
intropoints must be removed from this map to ensure validity.
Previously, we were looking at our global settings to see what kind
of proxy we had. But doing this would sometimes give us the wrong
results when we had ClientTransportPlugin configured but we weren't
using it for a particular connection. In several places in the
code, we had added checks to see if we were _really_ using a PT or
whether we were using a socks proxy, but we had forgotten to do so
in at least once case. Instead, since every time we call this
function we are asking about a single connection, it is probably
best just to make this function connection-specific.
Fixes bug 29670; bugfix on 0.2.6.2-alpha.
Previously we purged it in 1-hour increments -- but one-hour is the
maximum TTL for the cache! Now we do it in 25%-TTL increments.
Fixes bug 29617; bugfix on 0.3.5.1-alpha.
Fortunately, in 0.3.5.1-alpha we improved logging for various
failure cases involved with onion service client auth.
Unfortunately, for this one, we freed the file right before logging
its name.
Fortunately, tor_free() sets its pointer to NULL, so we didn't have
a use-after-free bug.
Unfortunately, passing NULL to %s is not defined.
Fortunately, GCC 9.1.1 caught the issue!
Unfortunately, nobody has actually tried building Tor with GCC 9.1.1
before. Or if they had, they didn't report the warning.
Fixes bug 30475; bugfix on 0.3.5.1-alpha.
When releasing OpenSSL patch-level maintenance updates,
we do not want to rebuild binaries using it.
And since they guarantee ABI stability, we do not have to.
Without this patch, warning messages were produced
that confused users:
https://bugzilla.opensuse.org/show_bug.cgi?id=1129411
Fixes bug 30190; bugfix on 0.2.4.2-alpha commit 7607ad2bec
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Previously, our use of abort() would break anywhere that we didn't
include stdlib.h. This was especially troublesome in case where
tor_assert_nonfatal() was used with ALL_BUGS_ARE_FATAL, since that
one seldom gets tested.
As an alternative, we could have just made this header include
stdlib.h. But that seems bloaty.
Fixes bug 30189; bugfix on 0.3.4.1-alpha.
Fixes bug 29922; bugfix on 0.2.9.3-alpha when we tried to capture
all these warnings. No need to backport any farther than 0.3.5,
though -- these warnings don't cause test failures before then.
This one was tricky to find because apparently it only happened on
_some_ windows builds.
In current NSS versions, these ciphersuites don't work with
SSL_ExportKeyingMaterial(), which was causing relays to fail when
they tried to negotiate the v3 link protocol authentication.
Fixes bug 29241; bugfix on 0.4.0.1-alpha.
When classifying a client's selection of TLS ciphers, if the client
ciphers are not yet available, do not cache the result. Previously,
we had cached the unavailability of the cipher list and never looked
again, which in turn led us to assume that the client only supported
the ancient V1 link protocol. This, in turn, was causing Stem
integration tests to stall in some cases. Fixes bug 30021; bugfix
on 0.2.4.8-alpha.
Let's use the same function exit point for BUG() codepath that we're using
for every other exit condition. That way, we're not forgetting to clean up
the memarea.
so that the relays that would be "excluded" from the bandwidth
file because of something failed can be included to diagnose what
failed, without still including these relays in the bandwidth
authorities vote.
Closes#29806.
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
Stop leaking parts of the shared random state in the shared-random unit
tests. The previous fix in 29599 was incomplete.
Fixes bug 29706; bugfix on 0.2.9.1-alpha.
Turns out that when reloading a tor configured with hidden service(s), we
weren't copying all the needed information between the old service object to
the new one.
For instance, the desc_is_dirty timestamp wasn't which could lead to the
service uploading its descriptor much later than it would need to.
The replaycache wasn't also moved over and some intro point information as
well.
Fixes#23790
Signed-off-by: David Goulet <dgoulet@torproject.org>
Prior to #23100, we were not counting HS circuit build times in our
calculation of the timeout. This could lead to a condition where our timeout
was set too low, based on non HS circuit build times, and then we would
abandon all HS circuits, storing no valid timeouts in the histogram.
This commit avoids the assert.
When "auto" was used for the port number for a listening socket, the
message logged after opening the socket would incorrectly say port 0
instead of the actual port used.
Fixes bug 29144; bugfix on 0.3.5.1-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Skip the Appveyor 32-bit Windows Server 2016 job, and 64-bit Windows
Server 2012 R2 job. The remaining 2 jobs still provide coverage of
64/32-bit, and Windows Server 2016/2012 R2.
Also set fast_finish, so failed jobs terminate the build immediately.
Fixes bug 29601; bugfix on 0.3.5.4-alpha.
When IPv4Only (IPv6Only) was used but the address could not be
interpreted as a IPv4 (IPv6) address, the error message referred
to the wrong IP version.
This also fixes up the error-checking logic so it's more precise
about what's being checked.
Fixes bug 13221; bugfix on 0.2.3.9-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
KIST works by computing how much should be allowed to write to the kernel for
a given socket, and then it writes that amount to the outbuf.
The problem is that it could be possible that the outbuf already has lots of
data in it from a previous scheduling round (because the kernel is full/busy
and Tor was not able to flush the outbuf yet). KIST ignores that the outbuf
has been filling (is above its "highwater") and writes more anyway. The end
result is that the outbuf length would exceed INT_MAX, hence causing an
assertion error and a corresponding "Bug()" message to get printed to the
logs.
This commit makes it for KIST to take into account the outbuf length when
computing the available space.
Bug found and patch by Rob Jansen.
Closes#29168. TROVE-2019-001.
Signed-off-by: David Goulet <dgoulet@torproject.org>
malloc_options needs to be declared extern (and declaring it extern
means we need to initialize it separately)
Fixes bug 29145; bugfix on 0.2.9.3-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
It was looking for object files made with the old automake
directorations, but those changed when we split up our libraries.
Fixes bug 29435; bugfix on 0.3.5.1-alpha.
