This improves client anonymity and avoids directory header tampering.
The extra load on the authorities should be offset by the fallback
directories feature.
This also simplifies the fixes to #18809.
Delete an unnecessary check for non-preferred IP versions.
Allows clients which can't reach any directories of their
preferred IP address version to get directory documents.
Patch on #17840 in 0.2.8.1-alpha.
After #17840 in 0.2.8.1-alpha, we incorrectly chose an IPv4
address for all DIRIND_ONEHOP directory connections,
even if the routerstatus didn't have an IPv4 address.
This likely affected bridge clients with IPv6 bridges.
Resolves#18921.
The problem is that "q" is always set on the first iteration even
if the question is not a supported question. This set of "q" is
not necessary, and will be handled after exiting the loop if there
if a supported q->type was found.
[Changes file by nickm]
lease enter the commit message for your changes. Lines starting
* SHA-3/SHAKE use little endian for certain things, so byteswap as
needed.
* The code was written under the assumption that unaligned access to
quadwords is allowed, which isn't true particularly on non-Intel.
Decide to advertise begindir support in a similar way to how
we decide to advertise DirPort.
Fix up the associated descriptor-building unit tests.
Resolves#18616, bugfix on 0c8e042c30 in #12538 in 0.2.8.1-alpha.
Apparently somewhere along the line we decided that MIN might be
missing.
But we already defined it (if it was missing) in compat.h, which
everybody includes.
Closes ticket 18889.
When we connect to a hidden service as a client we may need three internal
circuits, one for the descriptor retrieval, introduction, and rendezvous.
Let's try to make sure we have them. Closes#13239.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Unlike tor_assert(), these macros don't abort the process. They're
good for checking conditions we want to warn about, but which don't
warrant a full crash.
This commit also changes the default implementation for
tor_fragile_assert() to tor_assert_nonfatal_unreached_once().
Closes ticket 18613.
This marks some lines as unreachable by the unit tests, and as
therefore excluded from test coverage.
(Note: This convention is only for lines that are absolutely
unreachable. Don't use it anywhere you wouldn't add a
tor_fragile_assert().)
When the directory authorities refuse a bad relay's descriptor,
encourage the relay operator to contact us. Many relay operators
won't notice this line in their logs, but it's a win if even a
few learn why we don't like what their relay was doing.
Resolves ticket 18760.
I didn't specify a contact mechanism (e.g. an email address), because
every time we've done that in the past, a few years later we noticed
that the code was pointing people to an obsolete contact address.
Also, put libor-testing.a at a better position in the list of
libraries, to avoid linker errors.
This is a fix, or part of a fix, for 18490.
Conflicts:
src/test/include.am
This changes simply renames them by removing "Testing" in front of them and
they do not require TestingTorNetwork to be enabled anymore.
Fixes#18481
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Yes, we could cast to unsigned char first, but it's probably safest
to just use our own (in test_util), or remove bad-idea features that
we don't use (in readpassphrase.c).
Fixes 18728.
Only when we were actually flushing the cell stats to a controller
would we free them. Thus, they could stay in RAM even after the
circuit was freed (eg if we didn't have any controllers).
Fixes bug 18673; bugfix on 0.2.5.1-alpha.
Otherwise coverity complains that we're checking an whether an int64 is
less than INT64_MIN, which of course it isn't.
Fixes CID 1357176. Not in any released Tor.
They incorrectly summarized what the function was planning to do,
leading to wrong behavior like making an http request to an orport,
or making a begindir request to a dirport.
This change backs out some of the changes made in commit e72cbf7a, and
most of the changes made in commit ba6509e9.
This patch resolves bug 18625. There more changes I want to make
after this one, for code clarity.
This change allows us to simplify path selection for clients, and it
should have minimal effect in practice since >99% of Guards already have
the Stable flag. Implements ticket 18624.
Commit e72cbf7a4 introduced a change to directory_initiate_command_rend()
that made tor use the ORPort when making a directory request to the DirPort.
The primary consequence was that a relay couldn't selftest its DirPort thus
failing to work and join the network properly.
The main issue was we were always considering an anonymized connection to be
an OR connection which is not true.
Fixes#18623
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Regardless of the setting of ExtendAllowPrivateAddresses.
This fixes a bug with pluggable transports that ignore the
(potentially private) address in their bridge line.
Fixes bug 18517; bugfix on 23b088907f in tor-0.2.8.1-alpha.
When requesting extrainfo descriptors from a trusted directory
server, check whether it is an authority or a fallback directory
which supports extrainfo descriptors.
Fixes bug 18489; bugfix on 90f6071d8d in tor-0.2.4.7-alpha.
Reported by "atagar", patch by "teor".
Make it clearer that they are about outgoing connection attempts.
Specify the options involved where they were missing from one log
message.
Clarify a comment.
Downgrade logs and backtraces about IP versions to
info-level. Only log backtraces once each time tor runs.
Assists in diagnosing bug 18351; bugfix on c3cc8e16e in
tor-0.2.8.1-alpha.
Reported by "sysrqb" and "Christian", patch by "teor".
The fd would leak when the User wasn't recogniezed by
getpwnam(). Since we'd then go on to exit, this wasn't a terribad
leak, but it's still not as nice as no leak at all.
CID 1355640; bugfix on no released Tor.
commit edeba3d4 removed a switch, but left the "break" lines in
from that switch. fortunately the resulting behavior was not wrong,
since there was an outer switch that it was ok to break from.
no actual changes here -- but the new indenting makes it clear
that the fixes in #18332 were not as good as they should have been.
the next commit will deal with that.
We've got to make sure that every single subsequent calculation in
dirserv_generate_networkstatus_vote_obj() are based on the list of
routerinfo_t *after* we've removed possible duplicates, not before.
Fortunately, none of the functions that were taking a routerlist_t
as an argument were actually using any fields other than this list
of routers.
Resolves issue 18318.DG3.
I had a half-built mechanism to track, during the voting process,
whether the Ed25519 value (or lack thereof) reflected a true
consensus among the authorities. But we never actually inserted this
field in the consensus.
The key idea here is that we first attempt to match up votes by pairs
of <Ed,RSA>, where <Ed> can be NULL if we're told that there is no
Ed key. If this succeeds, then we can treat all those votes as 'a
consensus for Ed'. And we can include all other votes with a
matching RSA key and no statement about Ed keys as being "also about
the same relay."
After that, we look for RSA keys we haven't actually found an entry
for yet, and see if there are enough votes for them, NOT considering
Ed keys. If there are, we match them as before, but we treat them
as "not a consensus about ed".
When we include an entry in a consensus, if it does not reflect a
consensus about ed keys, then we include a new NoEdConsensus flag on
it.
This is all only for consensus method 22 or later.
Also see corresponding dir-spec patch.
When generating a vote, and we have two routerinfos with the same ed
key, omit the one published earlier.
This was supposed to have been solved by key pinning, but when I
made key pinning optional, I didn't realize that this would jump up
and bite us. It is part of bug 18318, and the root cause of 17668.
If we're a server with no address configured, resolve_my_hostname
will need this. But not otherwise. And the preseeding itself can
consume a few seconds if like tails we have no resolvers.
Fixes bug 18548.
I didn't want to grant blanket permissions for chmod() and chown(),
so here's what I had to do:
* Grant open() on all parent directories of a unix socket
* Write code to allow chmod() and chown() on a given file only.
* Grant chmod() and chown() on the unix socket.
This is a part of a fix for 18253; bugfix on 0.2.8.1-alpha.
Alternatively, we could permit chmod/chown in the sandbox, but I
really don't like giving the sandbox permission to alter
permissions.
Launching 7 descriptor fetches makes a connection to each HSDir that is 6
and the seventh one fails to pick an HSDir because they are all being used
already so it was killing all pending connections at once.
Fixes#15937
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When we made HidServDirectoryV2 always 1, we removed the situation
where a relay could choose not to be an HSDir. Now simplify the
rest of the code to reflect this decision.
(We have to remove two apparently unrelated free() calls in the unit
tests, since they used to free stuff that we created as a side effect
of calling router_get_my_routerinfo(), and now we no longer call that.)
This simplifies relay behavior, because the relay offers the hsdir
functionality independent of whether the directory authorities have
decided this relay is suitable for clients to use yet.
Implements ticket 18332.
The transproxy feature is only enabled when __FreeBSD__ is defined, and
only regular FreeBSD does that. Change this to __FreeBSD_kernel__ which
is defined on derivatives as well.
This enables the relevant options/validate__transproxy test on FreeBSD
derivatives.
Allow fallback directories which have been stable for 7 days
to work around #18050, which causes relays to submit descriptors
with 0 DirPorts when restarted. (Particularly during Tor version
upgrades.)
Ignore low fallback directory count in alpha builds.
Set the target count to 50.
On windows, you cannot open() a directory. So for Windows we should
just take our previous stat-based approach.
Closes bug 18392; bug not in any released Tor.
This is in accordance with our usual policy against freelists,
now that working allocators are everywhere.
It should also make memarea.c's coverage higher.
I also doubt that this code ever helped performance.
Short version: clang asan hates the glibc strcmp macro in
bits/string2.h if you are passing it a constant string argument of
length two or less. (I could be off by one here, but that's the
basic idea.)
Closes issue 14821.
Did you know that crypto_digest_all is a substring of
crypto_digest_alloc_bytes()? Hence the mysterious emergence of
"crypto_common_digestsoc_bytes".
Next time I should use the \b assertion in my regexen.
Spotted by Mike.
Previously, I had left in some debugging code with /*XXX*/ after it,
which nobody noticed. Live and learn! Next time I will use /*XXX
DO NOT COMMIT*/ or something.
We need to define a new consensus method for this; consensus method
21 shouldn't actually be used.
Fixes bug 17702; bugfix on 0.2.7.2-alpha.
We already write out bootstrapping progress (see bug 9927) per new
microdesc batch. There's no need to do a full "I learned some more
directory information, but not enough to..." line each time too.
Now, when a user who has set EntryNodes finishes bootstrapping, Tor
automatically repopulates the guard set based on this new directory
information. Fixes bug 16825; bugfix on 0.2.3.1-alpha.
Originally it can overflow in some weird cases. Now it should no longer
be able to do so.
Additionally, limit main's timers to 30 days rather than to 38 years;
we don't actually want any 38-year timers.
Closes bug 17682.
They are no longer "all" digests, but only the "common" digests.
Part of 17795.
This is an automated patch I made with a couple of perl one-liners:
perl -i -pe 's/crypto_digest_all/crypto_common_digests/g;' src/*/*.[ch]
perl -i -pe 's/\bdigests_t\b/common_digests_t/g;' src/*/*.[ch]
If unix socket was configured as listener (such as a ControlSocket or a
SocksPort unix socket), and tor was started as root but not configured
to switch to another user, tor would segfault while trying to string
compare a NULL value. Fixes bug 18261; bugfix on 0.2.8.1-alpha. Patch
by weasel.
Closes ticket 18242.
The rationale here is that I like having coverage on by default in my
own working directory, but I always want assertions turned on unless
I'm doing branch coverage specifically.
1. We were sometimes using libevent uninitialized, which is Not Allowed.
2. The malformed-PTR dns test was supposed to get a -1 output... but
the test was wrong, since it forgot that in-addr.arpa addresses
are in reverse order.
Bugs not in any released tor.
When ClientPreferIPv6ORPort is auto, bridges prefer the configured
bridge ORPort address. Otherwise, they use the value of the option.
Other clients prefer IPv4 ORPorts if ClientPreferIPv6ORPort is auto.
When ClientPreferIPv6DirPort is auto, all clients prefer IPv4 DirPorts.
When ClientPreferIPv6ORPort is auto, bridges prefer the configured
bridge ORPort address. Otherwise, they use the value of the option.
Other clients prefer IPv4 ORPorts if ClientPreferIPv6ORPort is auto.
When ClientPreferIPv6DirPort is auto, all clients prefer IPv4 DirPorts.
We use sensible parameters taken from common sources, and no longer
have dynamic DH groups as an option, but it feels prudent to have
OpenSSL validate p and g at initialization time.
We've never actually tested this support, and we should probably assume
it's broken.
To the best of my knowledge, only OpenVMS has this, and even on
OpenVMS it's a compile-time option to disable it. And I don't think
we build on openvms anyway. (Everybody else seems to be working
around the 2038 problem by using a 64-bit time_t, which won't expire
for roughly 292 billion years.)
Closes ticket 18184.
Modify callers to correctly handle these new NULL returns:
* fix assert in onion_extend_cpath
* warn and discard circuit in circuit_get_open_circ_or_launch
* warn, discard circuit, and tell controller in handle_control_extendcircuit
Bridge clients ignore ClientUseIPv6, acting as if it is always 1.
This preserves existing behaviour.
Make ClientPreferIPv6OR/DirPort auto by default:
* Bridge clients prefer IPv6 by default.
* Other clients prefer IPv4 by default.
This preserves existing behaviour.
ClientUseIPv4 0 tells tor to avoid IPv4 client connections.
ClientPreferIPv6DirPort 1 tells tor to prefer IPv6 directory connections.
Refactor policy for IPv4/IPv6 preferences.
Fix a bug where node->ipv6_preferred could become stale if
ClientPreferIPv6ORPort was changed after the consensus was loaded.
Update documentation, existing code, add unit tests.
node_get_all_orports and router_get_all_orports incorrectly used or_port
with IPv6 addresses. They now use ipv6_orport.
Also refactor and remove duplicated code.
This closes bug 18162; bugfix on a45b131590, which fixed a related
issue long ago.
In addition to the #18162 issues, this fixes a signed integer overflow
in smarltist_add_all(), which is probably not so great either.
Avoid using a pronoun where it makes comments unclear.
Avoid using gender for things that don't have it.
Avoid assigning gender to people unnecessarily.
Allow fallback directories which have been stable for 30 days
to work around #18050, which causes relays to submit descriptors
with 0 DirPorts when restarted. (Particularly during Tor version
upgrades.)
Ignore low fallback directory count in alpha builds.
Check size argument to memwipe() for underflow.
Closes bug #18089. Reported by "gk", patch by "teor".
Bugfix on 0.2.3.25 and 0.2.4.6-alpha (#7352),
commit 49dd5ef3 on 7 Nov 2012.
Otherwise, relays publish a descriptor with DirPort 0 when the DirPort
reachability test takes longer than the ORPort reachability test.
Closes bug #18050. Reported by "starlight", patch by "teor".
Bugfix on 0.1.0.1-rc, commit a1f1fa6ab on 27 Feb 2005.
Sometimes you can call time() and then touch a file, and have the
second come out a little before the first. See #18025 for way more
information than you necessarily wanted.
LibreSSL doesn't use OpenSSL_version (it uses the older SSLeay_version
API), but it reports a major version number as 2 in
OPENSSL_VERSION_NUMBER. Instead of fudging the version check, for now,
let's just check if we're using LibreSSL by checking the version number
macro exists, and use compatibility defines unconditionally when we
detect LibreSSL.
When _list() is called with AF_UNSPEC family and fails to enumerate
network interfaces using platform specific API, have it call
_hack() twice to find out IPv4 and/or IPv6 address of a machine Tor
instance is running on. This is correct way to handle this case
because _hack() can only be called with AF_INET and AF_INET6 and
does not support any other address family.
OpenSSL doesn't use them, and fwict they were never called. If some
version of openssl *does* start using them, we should test them before
we turn them back on.
See ticket 17926
This creates a random 100 KiB buffer, and incrementally hashes
(SHA3-512) between 1 and 5 * Rate bytes in a loop, comparing the running
digest with the equivalent one shot call from the start of the buffer.
This is an eXtendable-Output Function with the following claimed
security strengths against *all* adversaries:
Collision: min(d/2, 256)
Preimage: >= min(d, 256)
2nd Preimage: min(d, 256)
where d is the amount of output used, in bits.
* DIGEST_SHA3_[256,512] added as supported algorithms, which do
exactly what is said on the tin.
* test/bench now benchmarks all of the supported digest algorithms,
so it's possible to see just how slow SHA-3 is, though the message
sizes could probably use tweaking since this is very dependent on
the message size vs the SHA-3 rate.
The digest routines use init/update/sum, where sum will automatically
copy the internal state to support calculating running digests.
The XOF routines use init/absorb/squeeze, which behave exactly as stated
on the tin.
This will give relay operators the ability of disabling the caching of
directory data. In general, this should not be necessary, but on some
lower-resource systems it may beneficial.
I believe that the final SMARTLIST_DEL_CURRENT was sometimes
double-removing items that had already been removed by
connection_mark_unattached_ap or
connection_ap_handshake_attach_circuit().
The fix here is to prevent iteration over the list that other
functions might be modifying.
According to the POSIX standard the option value is a pointer to void
and the option length a socklen_t. The Windows implementation makes the
option value be a pointer to character and the option length an int.
Casting the option value to a pointer to void conforms to the POSIX
standard while the implicit cast to a pointer to character conforms to
the Windows implementation.
The casts of the option length to the socklen_t data type conforms to
the POSIX standard. The socklen_t data type is actually an alias of an
int so it also conforms to the Windows implementation.
It is AP-specific, so that's where it belongs. This shouldn't have
caused a bug, but due to #17876, we were never actually calling
connection_edge_about_to_close from connection_ap_about_to_close,
causing bug #17874 (aka bug #17752).
When a relay does not have an open directory port but it has an
orport configured and is accepting client connections then it can
now service tunnelled directory requests, too. This was already true
of relays with an dirport configured.
We also conditionally stop advertising this functionality if the
relay is nearing its bandwidth usage limit - same as how dirport
advertisement is determined.
Partial implementation of prop 237, ticket 12538
Applies the 6c443e987d fix to router_pick_directory_server_impl.
6c443e987d applied to directory servers chosen from the consensus,
and was:
"Tweak the 9969 fix a little
If we have busy nodes and excluded nodes, then don't retry with the
excluded ones enabled. Instead, wait for the busy ones to be nonbusy."
These IPv6 addresses must be quoted, because : is the port separator,
and "acce" is a valid hex block.
Add unit tests for assumed actions in IPv6 policies.
"Tor has included a feature to fetch the initial consensus from nodes
other than the authorities for a while now. We just haven't shipped a
list of alternate locations for clients to go to yet.
Reasons why we might want to ship tor with a list of additional places
where clients can find the consensus is that it makes authority
reachability and BW less important.
We want them to have been around and using their current key, address,
and port for a while now (120 days), and have been running, a guard,
and a v2 directory mirror for most of that time."
Features:
* whitelist and blacklist for an opt-in/opt-out trial.
* excludes BadExits, tor versions that aren't recommended, and low
consensus weight directory mirrors.
* reduces the weighting of Exits to avoid overloading them.
* places limits on the weight of any one fallback.
* includes an IPv6 address and orport for each FallbackDir, as
implemented in #17327. (Tor won't bootstrap using IPv6 fallbacks
until #17840 is merged.)
* generated output includes timestamps & Onionoo URL for traceability.
* unit test ensures that we successfully load all included default
fallback directories.
Closes ticket #15775. Patch by "teor".
OnionOO script by "weasel", "teor", "gsathya", and "karsten".
* The option is now KeepBindCapabilities
* We now warn if the user specifically asked for KeepBindCapabilities
and we can't deliver.
* The unit tests are willing to start.
* Fewer unused-variable warnings.
* More documentation, fewer misspellings.
router_digest_is_fallback_dir returns 1 if the digest is in the
currently loaded list of fallback directories, and 0 otherwise.
This function is for future use.
Once tor is downloading a usable consensus, any other connection
attempts are not needed.
Choose a connection to keep, favouring:
* fallback directories over authorities,
* connections initiated earlier over later connections
Close all other connections downloading a consensus.
Prop210: Add attempt-based connection schedules
Existing tor schedules increment the schedule position on failure,
then retry the connection after the scheduled time.
To make multiple simultaneous connections, we need to increment the
schedule position when making each attempt, then retry a (potentially
simultaneous) connection after the scheduled time.
(Also change find_dl_schedule_and_len to find_dl_schedule, as it no
longer takes or returns len.)
Prop210: Add multiple simultaneous consensus downloads for clients
Make connections on TestingClientBootstrapConsensus*DownloadSchedule,
incrementing the schedule each time the client attempts to connect.
Check if the number of downloads is less than
TestingClientBootstrapConsensusMaxInProgressTries before trying any
more connections.
UseDefaultFallbackDirs enables any hard-coded fallback
directory mirrors. Default is 1, set it to 0 to disable fallbacks.
Implements ticket 17576.
Patch by "teor".
On FreeBSD backtrace(3) uses size_t instead of int (as glibc does). This
causes integer precision loss errors when we used int to store its
results.
The issue is fixed by using size_t to store the results of backtrace(3).
The manual page of glibc does not mention that backtrace(3) returns
negative values. Therefore, no unsigned integer wrapping occurs when its
result is stored in an unsigned data type.
Using variables removes the ambiguity about when to use variables and
when to use substitutions. Variables always work. Substitutions only
work when Autoconf knows about them which is not always the case.
The variables are also placed between quotes to ensures spaces in the
variables are handled properly.
Update the code for IPv6 authorities and fallbacks for function
argument changes.
Update unit tests affected by the function argument changes in
the patch.
Add unit tests for authority and fallback:
* adding via a function
* line parsing
* adding default authorities
(Adding default fallbacks is unit tested in #15775.)
The internal memory allocation and history object counters of the
reputation code can be used to verify the correctness of (part of) the
code. Using these counters revealed an issue where the memory allocation
counter is not decreased when the bandwidth arrays are freed.
A new function ensures the memory allocation counter is decreased when a
bandwidth array is freed.
This commit also removes an unnecessary cast which was found while
working on the code.
* Since the variable is no longer modified, it should be called
'policy' instead of 'dest'. ("Dest" is short for
"destination".)
* Fixed the space issue that dgoulet found on the ticket.
* Fixed the comment a little. (We use the imperative for function
documentation.)
Some functions that use digest maps did not mention that the digests are
expected to have DIGEST_LEN bytes. This lead to buffer over-reads in the
past.
The hidden service descriptor cache (rendcache) tests use digest maps
which expect keys to have a length of DIGEST_LEN.
Because the tests use key strings with a length lower than DIGEST_LEN,
the internal copy operation reads outside the key strings which leads to
buffer over-reads.
The issue is resolved by using character arrays with a size of
DIGEST_LEN.
Patch on ade5005853.
The tests pass empty digest strings to the dir_server_new function which
copies it into a directory server structure. The copy operation expects
the digest strings to be DIGEST_LEN characters long.
Because the length of the empty digest strings are lower than
DIGEST_LEN, the copy operation reads outside the digest strings which
leads to buffer over-reads.
The issue is resolved by using character arrays with a size of
DIGEST_LEN.
Patch on 4ff08bb581.
When an HS process an INTRODUCE2 cell, we didn't validate if the IP address
of the rendezvous point was a local address. If it's the case, we end up
wasting resources by trying to extend to a local address which fails since
we do not allow that in circuit_extend().
This commit now rejects a rendezvous point that has a local address once
seen at the hidden service side unless ExtendAllowPrivateAddresses is set.
Fixes#8976
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
There was a dead check when we made sure that an array member of a
struct was non-NULL. Tor has been doing this check since at least
0.2.3, maybe earlier.
Fixes bug 17781.
Previously we'd suppressed the mask-bits field in the output when
formatting a policy if it was >=32. But that should be a >=128 if
we're talking about IPv6.
Since we didn't put these in descriptors, this bug affects only log
messages and controller outputs.
Fix for bug 16056. The code in question was new in 0.2.0, but the
bug was introduced in 0.2.4 when we started supporting IPv6 exits.
port is in host order (addr is tor_addr_t, endianness is abstracted).
addr and port can be different to conn->addr and conn->port if
connecting via a proxy.
Consistently ignore multicast addresses when automatically
generating reject private exit policies.
Closes ticket 17763. Bug fix on 10a6390deb,
not in any released version of Tor. Patch by "teor".
The tor_cert_get_checkable_sig function uses the signing key included in
the certificate (if available) when a separate public key is not given.
When the signature is valid, the tor_cert_checksig function copies the
public key from the checkable structure to the public key field of the
certificate signing key.
In situations where the separate public key is not given but the
certificate includes a signing key, the source and destination pointers
in the copy operation are equal and invoke undefined behavior.
Undefined behaviour is avoided by ensuring both pointers are different.
These functions must really never fail; so have crypto_rand() assert
that it's working okay, and have crypto_seed_rng() demand that
callers check its return value. Also have crypto_seed_rng() check
RAND_status() before returning.
Stop ignoring ExitPolicyRejectPrivate in getinfo
exit-policy/reject-private. Fix a memory leak.
Set ExitPolicyRejectPrivate in the unit tests, and make a mock
function declaration static.
Fix unit tests for get_interface_address6_list to assume less
about the interface addresses on the system.
Instead, mock get_interface_address6_list and use the mocked
function to provide a range of address combinations.
(If we take the branch above this assertion, than we *didn't* have a
v1 handshake. So if we don't take the branch, we did. So if we
reach this assertion, we must be running as a server, since clients
no longer attempt v1 handshakes.)
Fix for bug 17654; bugfix on 9d019a7db7.
Bug not in any released Tor.
Refuse connection requests to private OR addresses unless
ExtendAllowPrivateAddresses is set. Previously, tor would
connect, then refuse to send any cells to a private address.
Fixes bugs 17674 and 8976; bugfix on b7c172c9ec (28 Aug 2012)
Original bug 6710, released in 0.2.3.21-rc and an 0.2.2 maint
release.
Patch by "teor".
This migrates away from SHA1, and provides further hash flooding
protection on top of the randomised siphash implementation.
Add unit tests to make sure that different inputs don't have the
same hash.
The wrong list was used when looking up expired intro points in a rend
service object causing what we think could be reachability issues and
triggering a BUG log.
Fixes#16702
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
exit-policy/reject-private lists the reject rules added by
ExitPolicyRejectPrivate. This makes it easier for stem to
display exit policies.
Add unit tests for getinfo exit-policy/*.
Completes ticket #17183. Patch by "teor".
Modify policies_parse_exit_policy_reject_private so it also blocks
the addresses configured for OutboundBindAddressIPv4_ and
OutboundBindAddressIPv6_, and any publicly routable port addresses
on exit relays.
Add and update unit tests for these functions.
Move the code that rejects publicly routable exit relay addresses
to policies_parse_exit_policy_reject_private. Add
addr_policy_append_reject_addr_list and use it to reject interface
addresses.
This removes the duplicate reject checks on local_address and
ipv6_local_address, but duplicates will be removed by
exit_policy_remove_redundancies at the end of the function.
This also removes the info-level logging on rejected interface
addresses. Instead, log a debug-level message in
addr_policy_append_reject_addr.
This simplifies policies_parse_exit_policy_internal and prepares for
reporting these addresses over the control port in #17183.
In my testing, an IPv6-only FreeBSD jail without ::1 returned EINVAL
from tor_ersatz_socketpair. Let's not fail the unit test because of
this - it would only ever use tor_socketpair() anyway.
(But it won't work on some systems without IPv4/IPv6 localhost
(some BSD jails) by design, to avoid creating sockets on routable
IP addresses. However, those systems likely have the AF_UNIX socketpair,
which tor prefers.)
Fixes bug #17638; bugfix on a very early tor version,
earlier than 22dba27d8d (23 Nov 2004) / svn:r2943.
Patch by "teor".
Make unit tests pass on IPv6-only systems, and systems without
localhost addresses (like some FreeBSD jails).
Fixes:
* get_if_addrs_ifaddrs: systems without localhost
* get_if_addrs_ioctl: only works on IPv4 systems
* socket: check IPv4 and IPv6, skip on EPROTONOSUPPORT
* socketpair_ersatz: uses IPv4, skip on EPROTONOSUPPORT
Fixes bug #17632; bugfix on unit tests in 0.2.7.3-rc.
c464a36772 was a partial fix for this issue in #17255;
it was released in unit tests in 0.2.7.4-rc.
Patch by "teor".
Make unit tests pass on IPv6-only systems, and systems without
localhost addresses (like some FreeBSD jails).
Fixes:
* get_if_addrs_ifaddrs: systems without localhost
* get_if_addrs_ioctl: only works on IPv4 systems
* socket: check IPv4 and IPv6, skip on EPROTONOSUPPORT
* socketpair_ersatz: uses IPv4, skip on EPROTONOSUPPORT
Fixes bug #17632; bugfix on unit tests in 0.2.7.3-rc.
c464a36772 was a partial fix for this issue in #17255;
it was released in unit tests in 0.2.7.4-rc.
Patch by "teor".
Loading a on disk bridge descriptor causes a directory download to be
scheduled, which asserts due to the periodic events not being
initialized yet.
Fixes bug #17635, not in any released version of tor.
Now we only re-scan the list in the cases we did before: when we
have a new circuit that we should try attaching to, or when we have
added a new stream that we haven't tried to attach yet.
This is part of 17590.
Long ago we used to call connection_ap_handshake_attach_circuit()
only in a few places, since connection_ap_attach_pending() attaches
all the pending connections, and does so regularly. But this turned
out to have a performance problem: it would introduce a delay to
launching or connecting a stream.
We couldn't just call connection_ap_attach_pending() every time we
make a new connection, since it walks the whole connection list. So
we started calling connection_ap_attach_pending all over, instead!
But that's kind of ugly and messes up our callgraph.
So instead, we now have connection_ap_attach_pending() use a list
only of the pending connections, so we can call it much more
frequently. We have a separate function to scan the whole
connection array to see if we missed adding anything, and log a
warning if so.
Closes ticket #17590
Mark fallback directory mirrors as "too busy" when they return
a 503 response. Previously, the code just marked authorities as busy.
Unless clients set their own fallback directories, they will never see
this bug. (There are no default fallbacks yet.)
Fixes bug 17572; bugfix on 5c51b3f1f0 released in 0.2.4.7-alpha.
Patch by "teor".
Without this check, we potentially look up to 3 characters before
the start of a malloc'd segment, which could provoke a crash under
certain (weird afaik) circumstances.
Fixes 17404; bugfix on 0.2.6.3-alpha.
* Don't assume that every test box has an IPv4 address
* Don't assume that every test box has a non-local address
Resolves issue #17255 released in unit tests in 0.2.7.3-rc.
Since 11150 removed client-side support for renegotiation, we no
longer need to make sure we have an openssl/TLSvX combination that
supports it (client-side)
Now that x509_get_not{Before,After} are functions in OpenSSL 1.1
(not yet releasesd), we need to define a variant that takes a const
pointer to X509 and returns a const pointer to ASN1_time.
Part of 17237. I'm not convinced this is an openssl bug or a tor
bug. It might be just one of those things.
When logging to syslog, allow a tag to be added to the syslog identity
("Tor"), i.e. the string prepended to every log message. The tag can be
configured by setting SyslogIdentityTag and defaults to none. Setting
it to "foo" will cause logs to be tagged as "Tor-foo". Closes: #17194.
Warn when the state file was last written in the future.
Tor doesn't know that consensuses have expired if the clock is in the past.
Patch by "teor". Implements ticket #17188.
Ensure that either a valid address is returned in address pointers,
or that the address data is zeroed on error.
Ensure that free_interface_address6_list handles NULL lists.
Add unit tests for get_interface_address* failure cases.
Fixes bug #17173.
Patch by fk/teor, not in any released version of tor.
... that was removed by 31eb486c46 which first appeared in
0.2.7.3-rc.
If tor is running in a ElectroBSD (or FreeBSD) jail it can't
get any IP addresses that aren't assigned to the jail by
looking at the interfaces and (by design) the
get_interface_address6_via_udp_socket_hack() fallback doesn't
work either.
The missing return code check resulted in tor_addr_is_internal()
complaining about a "non-IP address of type 49", due to reading
uninitialised memory.
Fixes#17173.
BSD make takes spaces around = literally
and produces a "TESTING_TOR_BINARY "
variable with a trailing space, which leads
to test_keygen.sh failure.
Fixes 17154
Use environment variables instead. This repairs 'make distcheck',
which was running into trouble when it tried to chmod the generated
scripts.
Fixes 17148.
When we find a conflict in the keypinning journal, treat the new
entry as superseding all old entries that overlap either of its
keys.
Also add a (not-yet-used) configuration option to disable keypinning
enforcement.
Update the definition of the private exit policy in the man page
and torrcs. It didn't get merged correctly into the man page, and
it was incomplete in the torrcs. (Unfortunately, we only reject the
primary configured IPv4 and IPv6 addresses, not all configured IPv4
and IPv6 addresses.)
Also fixup msn page formatting errors from changes in tickets 16069
and 17027, mainly unescaped *s.
Advise users how to configure separate IPv4 and IPv6 exit
policies in the manpage and sample torrcs.
Related to fixes in ticket #16069 and #17027. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
src/test/test_policy.c:
Merged calls to policies_parse_exit_policy by adding additional arguments.
fixup to remaining instance of ~EXIT_POLICY_IPV6_ENABLED.
Compacting logic test now produces previous list length of 4, corrected this.
src/config/torrc.sample.in:
src/config/torrc.minimal.in-staging:
Merged torrc modification dates in favour of latest.
Log an info-level message containing the reject line added to the
exit policy for each local IP address blocked by ExitPolicyRejectPrivate:
- Published IPv4 and IPv6 addresses
- Publicly routable IPv4 and IPv6 interface addresses
ExitPolicyRejectPrivate now rejects more local addresses by default:
* the relay's published IPv6 address (if any), and
* any publicly routable IPv4 or IPv6 addresses on any local interfaces.
This resolves a security issue for IPv6 Exits and multihomed Exits that
trust connections originating from localhost.
Resolves ticket 17027. Patch by "teor".
Patch on 42b8fb5a15 (11 Nov 2007), released in 0.2.0.11-alpha.
The unit tests added in e033d5e90b got malformed_list added to
router_parse_addr_policy_item_from_string calls, but unit tests from
subsequent commits didn't get the extra argument until now.
In previous versions of Tor, ExitPolicy accept6/reject6 * produced
policy entries for IPv4 and IPv6 wildcard addresses.
To reduce operator confusion, change accept6/reject6 * to only produce
an IPv6 wildcard address.
Resolves bug #16069.
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
Tor now warns when ExitPolicy lines occur after accept/reject *:*
or variants. These lines are redundant, and were always ignored.
Partial fix for ticket 16069. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
When parsing torrc ExitPolicies, we now warn if:
* an IPv4 address is used on an accept6 or reject6 line. The line is
ignored, but the rest of the policy items in the list are used.
(accept/reject continue to allow both IPv4 and IPv6 addresses in torrcs.)
* a "private" address alias is used on an accept6 or reject6 line.
The line filters both IPv4 and IPv6 private addresses, disregarding
the 6 in accept6/reject6.
When parsing torrc ExitPolicies, we now issue an info-level message:
* when expanding an accept/reject * line to include both IPv4 and IPv6
wildcard addresses.
In each instance, usage advice is provided to avoid the message.
Partial fix for ticket 16069. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
Add get_interface_address[6]_list by refactoring
get_interface_address6. Add unit tests for new and existing functions.
Preparation for ticket 17027. Patch by "teor".
Patch on 42b8fb5a15 (11 Nov 2007), released in 0.2.0.11-alpha.
routerset_parse now accepts IPv6 literal addresses.
Fix for ticket 17060. Patch by "teor".
Patch on 3ce6e2fba2 (24 Jul 2008), and related commits,
released in 0.2.1.3-alpha.
When validating a new descriptor against our rend cache failure, we were
added the failure entry to the new cache entry without duplicating. It was
then freed just after the validation ending up in a very bad memory state
that was making tor abort(). To fix this, a dup function has been added and
used just before adding the failure entry.
Fixes#17041
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
No functional changes, but since NoKeepAliveIsolateSOCKSAuth isn't
part of isoflag, it should be checked where all other similar options
are, and bypass the (no-op) masking at the end.
Increase default boostrap time in test-network.sh to 30 seconds,
for larger networks like bridges+ipv6+hs.
This avoids the failure-hiding issues inherent in the retry approach
in #16952.
This controls the circuit dirtyness reset behavior added for Tor
Browser's user experience fix (#15482). Unlike previous iterations
of this patch, the tunable actually works, and is documented.
(These inputs are possible when Shadow starts the world at time_t 0,
and breaks our assumption that Tor didn't exist in the 1970s.)
Fixes regression introduced in 241e6b09. Fixes#16980.
make test-network-all is Makefile target which verifies a series
of test networks generated using test-network.sh and chutney.
It runs IPv6 and mixed version test networks if the prerequisites are
available.
Each test network reports PASS, FAIL, or SKIP.
Closes ticket 16953. Patch by "teor".
Also adds "--hs-multi-client 1" option to TEST_NETWORK_FLAGS.
This resolves#17012.
Larger networks, such as bridges+hs, may fail until #16952 is merged.
Performing lookups in both the client and service side descriptor
caches from the same rend_cache_lookup_entry() function increases the
risk of accidental API misuse.
I'm separating the lookup functions to keep the caches distinct.
Parameterize the rend_cache_clean() function to allow it clean
old rendezvous descriptors from the service-side cache as well as
the client descriptor cache.
Including the replica number in the HS_DESC CREATED event provides
more context to a control port client. The replica allows clients
to more easily identify each replicated descriptor from the
independantly output control events.
Entries in the service-side descriptor cache are now cleaned when
rend_cache_free_all() is called. The call to tor_free(intro_content)
in rend_cache_store_v2_desc_as_service() is moved to prevent a
potential double-free when a service has a descriptor with a newer
timestamp already in it's service-side descriptor cache.
Adds an Enum which represents the different types of rendezvous
descriptor caches. This argument is passed in each call to
rend_cache_lookup_entry() to specify lookup in the client-side or
service-side descriptor caches.
Adds a control command to fetch a local service descriptor from the
service descriptor cache. The local service descriptor cache is
referenced by the onion address of the service.
This control command is documented in the control spec.
When this is set, and Tor is running as a relay, it will not
generate or load its secret identity key. You can manage the secret
identity key with --keygen. Implements ticket 16944.
Apparently this only happens with clang (or with some particular
clang versions), and only on i386.
Fixes 16970; bug not in any released Tor.
Found by Teor; fix from Yawning.
In a nutshell, since a circuit can not exit at its entry point, it's very
easy for an attacker to find the hidden service guard if only one EntryNodes
is specified since for that guard, the HS will refuse to build a rendezvous
circuit to it.
For now, the best solution is to stop tor to allow a single EntryNodes for
an hidden service.
Fixes#14917
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Only applies to connections with SOCKS auth set, so that non-web Tor
activity is not affected.
Simpler version of Nick's patch because the randomness worried me, and I'm not
otherwise sure why we want a max here.
Make "bridges+hs" the default test network. This tests almost all
tor functionality during make test-network, while allowing tests
to succeed on non-IPv6 systems.
Requires chutney commit 396da92 in test-network-bridges-hs.
Closes tickets 16945 (tor), 16946 (chutney) . Patches by "teor".
In validate_recommended_package_line, at this point in the function,
n_entries is always >= 1. Coverity doesn't like us checking it for
0.
CID 1268063.
Removes a check to PublishHidServDescriptors in
rend_consider_services_upload(). This allows descriptors to be
generated and stored in the local cache when PublishHidServDescriptor = 0.
Keep the PublishHidServDescriptors option check in
rend_consider_descriptor_republication(). We will never need to republish
a descriptor if we are not publishing descriptors to the HSDirs.
Service descriptors are now generated regardless of the the
PublishHidServDescriptors option. The generated descriptors are stored
in the service descriptor cache.
The PublishHidServDescriptors = 1 option now prevents descriptor
publication to the HSDirs rather than descriptor generation.
Deindent a block of code inside the PublishHidServDescriptors option
check in upload_service_descriptor(). Stylistic commit to make the
subsequent reworking of this code cleaner.
The HS_DESC CREATED event should be emmited when a new service descriptor
is generated for a local rendevous service. This event is documented
in the control spec.
This commit resolves ticket #16291.
Adds a service descriptor cache which is indexed by service ID. This
descriptor cache is used to store service descriptors generated by a
local rendevous service.
The service-side cach can be queried by calling rend_cache_lookup_entry()
with the 'service' argument set to 1.
We don't want to accept any work after one of our worker functions has
returned WQ_RPL_SHUTDOWN. This testcase currently fails, because we do
not actually stop any of the worker threads.
We used to use this when we had some controllers that would accept
long names and some that wouldn't. But it's been obsolete for a
while, and it's time to strip it out of the code.
Previously we'd put these strings right on the controllers'
outbufs. But this could cause some trouble, for these reasons:
1) Calling the network stack directly here would make a huge portion
of our networking code (from which so much of the rest of Tor is
reachable) reachable from everything that potentially generated
controller events.
2) Since _some_ events (EVENT_ERR for instance) would cause us to
call connection_flush(), every control_event_* function would
appear to be able to reach even _more_ of the network stack in
our cllgraph.
3) Every time we generated an event, we'd have to walk the whole
connection list, which isn't exactly fast.
This is an attempt to break down the "blob" described in
http://archives.seul.org/tor/dev/Mar-2015/msg00197.html -- the set of
functions from which nearly all the other functions in Tor are
reachable.
Closes ticket 16695.
Test that TestingDirAuthVote{Exit,Guard,HSDir}[Strict] work on
routersets matching all routers, one router, and no routers.
TestingDirAuthVote{Exit,Guard,HSDir} set the corresponding flag
on routerstatuses which match the routerset, but leave other flags
unmodified.
TestingDirAuthVote{Exit,Guard,HSDir}Strict clear the corresponding flag
on routerstatuses which don't match the routerset.
Make it easier to unit test TestingDirAuthVote{Exit,Guard,HSDir}
by refactoring the code which sets flags based on them into a
new function dirserv_set_routerstatus_testing.
"option to prevent guard,exit,hsdir flag assignment"
"A node will never receive the corresponding flag unless
that node is specified in the
TestingDirAuthVote{Exit,Guard,HSDir} list, regardless of
its uptime, bandwidth, exit policy, or DirPort".
Patch modified by "teor": VoteOnHidServDirectoriesV2
is now obsolete, so TestingDirAuthVoteHSDir always
votes on HSDirs.
Closes ticket 14882. Patch by "robgjansen".
Commit message and changes file by "teor"
with quotes from "robgjansen".
Fix an error in the manual page and comments for
TestingDirAuthVoteHSDir, which suggested that a
HSDir required "ORPort connectivity". While this is true,
it is in no way unique to the HSDir flag. Of all the flags,
only HSDirs need a DirPort configured in order for the
authorities to assign that particular flag.
Fixed as part of 14882. Patch by "teor".
Bugfix on 0.2.6.3 (f9d57473e1 on 10 January 2015).
This probably requires the user to manually set CFLAGS, but should
result in a net gain on 32 bit x86. Enabling SSE2 support would be
possible on x86_64, but will result in slower performance.
Implements feature #16535.
* FIXES#16823: https://bugs.torproject.org/16823
If an OP were to send a CREATE_FAST cell to an OR, and that
CREATE_FAST cell had unparseable key material, then tor_free() would
be called on the create cell twice. This fix removes the second
(conditional on the key material being bad) call to tor_free(), so
that now the create cell is always freed once, regardless of the status of
the key material.
(This isn't actually a double-free bug, since tor_free() sets its
input to NULL, and has no effect when called with input NULL.)
Instead of having it call update_all_descriptor_downloads and
update_networkstatus_downloads directly, we can have it cause them to
get rescheduled and called from run_scheduled_events.
Closes ticket 16789.
The code was always in our Ed25519 wrappers, so enable it when using
the ed25519-donna backend, and deal with the mocking related
crypto_rand silliness.
Implements feature 16533.
When fetching a descriptor, we know test every introduction points in it
against our rend failure cache to know if we keep it or not. For this to
work, now everytime an introduction points is discareded (ex: receiving a
NACK), we note it down in our introduction cache.
See rendcache.c for a detailed explanation of the cache's behavior.
Fixes#16389
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When we removed Running/Valid checks from Fast and Stable in 8712, I
removed them from HSDir too, which apparently wasn't a good idea.
Reverts part of a65e835800. Fixes bug 16524. Bugfix
on 0.2.7.2-alpha.
microdesc_free_() called get_microdesc_cache(), which had the fun
side-effect of potentially reloading the whole cache from disk.
Replace it with a variant that doesn't.
If setrlimit() failed, max_out wasn't set in set_max_file_descriptors()
ending in a state where we don't use ULIMIT_BUFFER for things like tor
private key files.
Also fix the set_max_file_descriptors() documentation.
Fixes#16274
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
According to POSIX, the mutex must be locked by the thread calling the signal
functions to ensure predictable scheduling behavior.
Found the issue using Helgrind which gave the warning `dubious: associated lock
is not held by any thread`.
The base64 and base32 functions used to be in crypto.c;
crypto_format.h had no header; some general-purpose functions were in
crypto_curve25519.c.
This patch makes a {crypto,util}_format.[ch], and puts more functions
there. Small modules are beautiful!
The control port was using set_max_file_descriptors() with a limit set to 0
to query the number of maximum socket Tor can use. With the recent changes
to that function, a check was introduced to make sure a user can not set a
value below the amount we reserved for non socket.
This commit adds get_max_sockets() that returns the value of max_sockets so
we can stop using that "setter" function to get the current value.
Finally, the dead code is removed that is the code that checked for limit
equal to 0. From now on, set_max_file_descriptors() should never be used
with a limit set to 0 for a valid use case.
Fixes#16697
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
URI syntax (and DNS syntax) allows for a single trailing `.` to
explicitly distinguish between a relative and absolute
(fully-qualified) domain name. While this is redundant in that RFC 1928
DOMAINNAME addresses are *always* fully-qualified, certain clients
blindly pass the trailing `.` along in the request.
Fixes bug 16674; bugfix on 0.2.6.2-alpha.
The only reason 16 byte alignment is required is for SSE2 load and
store operations, so only align datastructures to 16 byte boundaries
when building with SSE2 support.
This fixes builds with GCC SSP on platforms that don't have special
case code to do dynamic stack re-alignment (everything not x86/x86_64).
Fixes bug #16666.
The workqueue test help message has two issues. First, the message uses 4 space
indentation when 2 space indentation seems more common. Second, the help
message misses some options.
This commit fixes both issues.
1) We already require C99.
2) This allows us to support MSVC again (thanks to Gisle Vanem for
this part)
3) This change allows us to dump some rotten old compatibility code
from log.c
It did a good idea, but the code-quality of libupnpc and libnatpnp
is so dodgy that I'm not really comfortable including them alongside
Tor proper. Instead, we'll recommend that people do the pure-go
reimplementation instead. Closes ticket 13338.
Make sure that signing certs are signed by the right identity key,
to prevent a recurrence of #16530. Also make sure that the master
identity key we find on disk matches the one we have in RAM, if we
have one.
This is for #16581.
When there is a signing key and the certificate lists a key, make
sure that the certificate lists the same signing key.
When there are public key and secret key stored in separate files,
make sure they match.
Use the right file name when we load an encrypted secret key and
then find a problem with it.
This is part of 16581.
Add a new and slow unit test that checks if libscrypt_scrypt() and
EBP_PBE_scrypt() yield the same keys from test vectors.
squash! Assert interoperability betweeen libscrypt and OpenSSL EBP_PBE_scrypt().
squash! Assert interoperability betweeen libscrypt and OpenSSL EBP_PBE_scrypt().
squash! Assert interoperability betweeen libscrypt and OpenSSL EBP_PBE_scrypt().
When cleaning up extra circuits that we've opened for performance reason, we
need to count all the introduction circuit and not only the established ones
else we can end up with too many introduction points.
This also adds the check for expiring nodes when serving an INTRODUCE cell
since it's possible old clients are still using them before we have time to
close them.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
To upload a HS descriptor, this commits makes it that we wait for all
introduction point to be fully established.
Else, the HS ends up uploading a descriptor that may contain intro points
that are not yet "valid" meaning not yet established or proven to work. It
could also trigger three uploads for the *same* descriptor if every intro
points takes more than 30 seconds to establish because of desc_is_dirty
being set at each intro established.
To achieve that, n_intro_points_established varialbe is added to the
rend_service_t object that is incremented when we established introduction
point and decremented when we remove a valid intro point from our list.
The condition to upload a descriptor also changes to test if all intro
points are ready by making sure we have equal or more wanted intro points
that are ready.
The desc_id_dirty flag is kept to be able to still use the
RendInitialPostPeriod option.
This partially fixes#13483.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
There is a case where if the introduction circuit fails but the node is
still in the consensus, we clean up the intro point and choose an other one.
This commit fixes that by trying to reuse the existing intro point with a
maximum value of retry.
A retry_nodes list is added to rend_services_introduce() and when we remove
an invalid intro points that fits the use case mentionned before, we add the
node to the retry list instead of removing it. Then, we retry on them before
creating new ones.
This means that the requirement to remove an intro point changes from "if no
intro circuit" to "if no intro circuit then if no node OR we've reached our
maximum circuit creation count".
For now, the maximum retries is set to 3 which it completely arbitrary. It
should also at some point be tied to the work done on detecting if our
network is down or not.
Fixes#8239
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The reasoning for refactoring this function is that removing the
introduction point adaptative algorithm (#4862) ended up changing quite a
bit rend_services_introduce(). Also, to fix some open issues (#8239, #8864
and #13483), this work had to be done.
First, this removes time_expiring variable in an intro point object and
INTRO_POINT_EXPIRATION_GRACE_PERIOD trickery and use an expiring_nodes list
where intro nodes that should expire are moved to that list and cleaned up
only once the new descriptor is successfully uploaded. The previous scheme
was adding complexity and arbitrary timing to when we expire an intro point.
We keep the intro points until we are sure that the new descriptor is
uploaded and thus ready to be used by clients. For this,
rend_service_desc_has_uploaded() is added to notify the HS subsystem that
the descriptor has been successfully uploaded. The purpose of this function
is to cleanup the expiring nodes and circuits if any.
Secondly, this adds the remove_invalid_intro_points() function in order to
split up rend_services_introduce() a bit with an extra modification to it
that fixes#8864. We do NOT close the circuit nor delete the intro point if
the circuit is still alive but the node was removed from the consensus. Due
to possible information leak, we let the circuit and intro point object
expire instead.
Finally, the whole code flow is simplified and large amount of documentation
has been added to mostly explain the why of things in there.
Fixes#8864
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The runtime sanity checking is slightly different from the optimized
basepoint stuff in that it uses a given implementation's self tests if
available, and checks if signing/verification works with a test vector
from the IETF EdDSA draft.
The unit tests include a new testcase that will fuzz donna against ref0,
including the blinding and curve25519 key conversion routines. If this
is something that should be done at runtime (No?), the code can be
stolen from there.
Note: Integrating batch verification is not done yet.
Integration work scavanged from nickm's `ticket8897_9663_v2` branch,
with minor modifications. Tor will still sanity check the output but
now also attempts to catch extreme breakage by spot checking the
optimized implementation vs known values from the NaCl documentation.
Implements feature 9663.
This needs to be done to allow for the possibility of removing the
ref10 code at a later date, though it is not performance critical.
When integrated by kludging it into tor, it passes unit tests, and is
twice as fast.
Integrating it the "wrong" way into common/crypto_ed25519.c passes
`make check`, and there appear to be some known answer tests for this,
so I assume I got it right.
Blinding a public key goes from 139.10 usec to 70.78 usec using
ed25519-donna (NB: Turboboost/phase of moon), though the code isn't
critical path, so supporting it is mostly done for completeness.
Integrate ed25519-donna into the build process, and provide an
interface that matches the `ref10` code. Apart from the blinding and
Curve25519 key conversion, this functions as a drop-in replacement for
ref10 (verified by modifying crypto_ed25519.c).
Tests pass, and the benchmarks claim it is quite a bit faster, however
actually using the code requires additional integration work.
The following arguments change how chutney verifies the network:
--bytes n sends n bytes per test connection (10 KBytes)
--connections n makes n test connections per client (1)
--hs-multi-client 1 makes each client connect to each HS (0)
Requires the corresponding chutney performance testing changes.
Note: using --connections 7 or greater on a HS will trigger #15937.
Patch by "teor".
This is a way to specify the amount of introduction points an hidden service
can have. Maximum value is 10 and the default is 3.
Fixes#4862
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When we ran out of intro points for a hidden service (which could
happen on a newnym), we would change the connection's state back to
"waiting for hidden service descriptor." But this would make an
assertion fail if we went on to call circuit_get_open_circ_or_launch
again.
This fixes bug 16013; I believe the bug was introduced in
38be533c69, where we made it possible for
circuit_get_open_circ_or_launch() to change the connection's state.
RFC 952 is approximately 30 years old, and people are failing to comply,
by serving A records with '_' as part of the hostname. Since relaxing
the check is a QOL improvement for our userbase, relax the check to
allow such abominations as destinations, especially since there are
likely to be other similarly misconfigured domains out there.
When I fixed#11243, I made it so we would take the digest of a
descriptor before tokenizing it, so we could desist from download
attempts if parsing failed. But when I did that, I didn't remove an
assertion that the descriptor began with "onion-key". Usually, this
was enforced by "find_start_of_next_microdescriptor", but when
find_start_of_next_microdescriptor returned NULL, the assertion was
triggered.
Fixes bug 16400. Thanks to torkeln for reporting and
cypherpunks_backup for diagnosing and writing the first fix here.
Every functions and objects that are used for hidden service descriptor
caches are moved to rendcache.{c|h}.
This commit does NOT change anything, just moving code around.
Fixes#16399
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
For now, rend_cache_entry_t has been moved from or.h to rendcache.h and
those files have been added to the build system.
In the next commit, these will contain hidden service descriptor cache ABI
and API for both client and directory side. The goal is to consolidate the
descriptor caches in one location to ease development, maintenance, review
and improve documentation for each cache behavior and algorithm.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When --keygen is provided, we prompt for a passphrase when we make a
new master key; if it is nonempty, we store the secret key in a new
crypto_pwbox.
Also, if --keygen is provided and there *is* an encrypted master key,
we load it and prompt for a passphrase unconditionally.
We make a new signing key unconditionally when --keygen is provided.
We never overwrite a master key.
If crypto_early_init fails, a typo in a return value from tor_init
means that tor_main continues running, rather than returning
an error value.
Fixes bug 16360; bugfix on d3fb846d8c in 0.2.5.2-alpha,
introduced when implementing #4900.
Patch by "teor".
This reverts commit 9407040c59.
Small fix, "e->received" had to be removed since that variable doesn't exist
anymore.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
clang complains that the address of struct member in an assert in
SSL_SESSION_get_master_key is always non-NULL.
Instead, check each pointer argument is non-NULL before using it.
Fix on f90a704f12 from 27 May 2015, not in any released version of tor.
signing_key can be NULL in ed_key_init_from_file in routerkeys.c.
Discovered by clang 3.7 address sanitizer.
Fix on c03694938e, not in any released version of Tor.
clang 3.7 complains that using a preprocessor directive inside
a macro invocation in test_util_writepid in test_util.c is undefined.
Fix on 79e85313aa on 0.2.7.1-alpha.
Unused variable warnings were still generated under some versions of OpenSSL.
Instead, make sure all variables are used under all versions.
Fix on 496df21c89, not in any released version of tor.
Rend_add_service() frees its argument on failure; no need to free again.
Fixes bug 16228, bugfix on 0.2.7.1-alpha
Found by coverity; this is CID 1301387.
Also, have testing-level options to set the lifetimes and
expiration-tolerances of all key types, plus a non-testing-level
option to set the lifetime of any auto-generated signing key.
# The first commit's message is:
Regenerate ed25519 keys when they will expire soon.
Also, have testing-level options to set the lifetimes and
expiration-tolerances of all key types, plus a non-testing-level
option to set the lifetime of any auto-generated signing key.
# The 2nd commit message will be skipped:
# fixup! Regenerate ed25519 keys when they will expire soon.
This is a new collator type that follows proposal 220 for deciding
which identities to include. The rule is (approximately):
If a <ed,rsa> identity is listed by more than half of authorities,
include it. And include all <rsa> votes about that node as
matching.
Otherwise, if an <*,rsa> or <rsa> identity is listed by more than
half of the authorities, and no <ed,rsa> has been listed, include
it.
* Include ed25519 identities in votes
* Include "no ed25519 identity" in votes
* Include some commented-out code about identity voting. (This
will disappear.)
* Include some functions for identity voting (These will disappear.)
* Enforce uniqueness in ed25519 keys within a vote
Extrainfo documents are now ed-signed just as are router
descriptors, according to proposal 220. This patch also includes
some more tests for successful/failing parsing, and fixes a crash
bug in ed25519 descriptor parsing.
An earlier version of these tests was broken; now they're a nicer,
more robust, more black-box set of tests. The key is to have each
test check a handshake message that is wrong in _one_ way.
This includes the link handshake variations for proposal220.
We'll use this for testing first, and then use it to extend our
current code to support prop220.
When there are annotations on a router descriptor, the
ed25519-identity element won't be at position 0 or 1; it will be at
router+1 or router-1.
This patch also adds a missing smartlist function to search a list for
an item with a particular pointer.
With this patch:
* Authorities load the key-pinning log at startup.
* Authorities open a key-pinning log for writing at startup.
* Authorities reject any router with an ed25519 key where they have
previously seen that ed25519 key with a different RSA key, or vice
versa.
* Authorities warn about, but *do not* reject, RSA-only descriptors
when the RSA key has previously gone along with an Ed25519 key.
(We should make this a 'reject' too, but we can't do that until we're
sure there's no legit reason to downgrade to 0.2.5.)
This module implements a key-pinning mechanism to ensure that it's
safe to use RSA keys as identitifers even as we migrate to Ed25519
keys. It remembers, for every Ed25519 key we've seen, what the
associated Ed25519 key is. This way, if we see a different Ed25519
key with that RSA key, we'll know that there's a mismatch.
We persist these entries to disk using a simple format, where each
line has a base64-encoded RSA SHA1 hash, then a base64-endoded
Ed25519 key. Empty lines, misformed lines, and lines beginning with
a # are ignored. Lines beginning with @ are reserved for future
extensions.
Routers now use TAP and ntor onion keys to sign their identity keys,
and put these signatures in their descriptors. That allows other
parties to be confident that the onion keys are indeed controlled by
the router that generated the descriptor.
Routers now use TAP and ntor onion keys to sign their identity keys,
and put these signatures in their descriptors. That allows other
parties to be confident that the onion keys are indeed controlled by
the router that generated the descriptor.
For prop220, we have a new ed25519 certificate type. This patch
implements the code to create, parse, and validate those, along with
code for routers to maintain their own sets of certificates and
keys. (Some parts of master identity key encryption are done, but
the implementation of that isn't finished)
If the OpenSSL team accepts my patch to add an
SSL_get_client_ciphers function, this patch will make Tor use it
when available, thereby working better with openssl 1.1.
We previously used this function instead of SSL_set_cipher_list() to
set up a stack of client SSL_CIPHERs for these reasons:
A) In order to force a particular order of the results.
B) In order to be able to include dummy entries for ciphers that
this build of openssl did not support, so we could impersonate
Firefox harder.
But we no longer do B, since we merged proposal 198 and stopped
lying about what ciphers we know.
And A was actually pointless, since I had misread the implementation
of SSL_set_cipher_list(). It _does_ do some internal sorting, but
that is pre-sorting on the master list of ciphers, not sorting on
the user's preferred order.
As OpenSSL >= 1.0.0 is now required, ECDHE is now mandatory. The group
has to be validated at runtime, because of RedHat lawyers (P224 support
is entirely missing in the OpenSSL RPM, but P256 is present and is the
default).
Resolves ticket #16140.
The key here is to never touch ssl->cipher_list directly, but only
via SSL_get_ciphers(). But it's not so simple.
See, if there is no specialized cipher_list on the SSL object,
SSL_get_ciphers returns the cipher_list on the SSL_CTX. But we sure
don't want to modify that one! So we need to use
SSL_set_cipher_list first to make sure that we really have a cipher
list on the SSL object.
When set, this limits the maximum number of simultaneous streams per
rendezvous circuit on the server side of a HS, with further RELAY_BEGIN
cells being silently ignored.
This can be modified via "HiddenServiceMaxStreamsCloseCircuit", which
if set will cause offending rendezvous circuits to be torn down instead.
Addresses part of #16052.
Ephemeral services will be listed in rend_services_list at the end of
rend_config_services, so it must check whether directory is non-NULL
before comparing.
This crash happens when reloading config on a tor with mixed configured
and ephemeral services.
Fixes bug #16060. Bugfix on 0.2.7.1-alpha.
With #15881 implemented, this adds the missing descriptor ID at the end of
the expected control message.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
For FAILED and RECEIVED action of the HS_DESC event, we now sends back the
descriptor ID at the end like specified in the control-spec section 4.1.25.
Fixes#15881
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This field was only needed to work with the now-long-gone (I hope,
except for some horrible apples) openssl 0.9.8l; if your headers say
you have openssl 1.1, you won't even need it.
OpenSSL 1.1.0 must be built with "enable-deprecated", and compiled with
`OPENSSL_USE_DEPRECATED` for this to work, so instead, use the newer
routine as appropriate.
Use it in the sample_laplace_distribution function to make sure we return
the correct converted value after math operations are done on the input
values.
Thanks to Yawning for proposing a solution.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
- Rewrite changes file.
- Avoid float comparison with == and use <= instead.
- Add teor's tor_llround(trunc(...)) back to silence clang warnings.
- Replace tt_assert() with tt_i64_op() and friends.
- Fix whitespace and a comment.
Consistently check for overflow in round_*_to_next_multiple_of.
Check all round_*_to_next_multiple_of functions with expected values.
Check all round_*_to_next_multiple_of functions with maximal values.
Related to HS stats in #13192.
Avoid division by zero.
Avoid taking the log of zero.
Silence clang type conversion warnings using round and trunc.
The existing values returned by the laplace functions do not change.
Add tests for laplace edge cases.
These changes pass the existing unit tests without modification.
Related to HS stats in #13192.
The length of auth_data from an INTRODUCE2 cell is checked when the
auth_type is recognized (1 or 2), but not for any other non-zero
auth_type. Later, auth_data is assumed to have at least
REND_DESC_COOKIE_LEN bytes, leading to a client-triggered out of bounds
read.
Fixed by checking auth_len before comparing the descriptor cookie
against known clients.
Fixes#15823; bugfix on 0.2.1.6-alpha.
"+HSPOST" and the related event changes allow the uploading of HS
descriptors via the control port, and more comprehensive event
monitoring of HS descriptor upload status.
When we have a new descriptor ID for an onion address request, change it in
the rend_data_t object and purge the old one from the last hid serv request
cache.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Stop using an onion address since it's not indexed with that anymore in the
last hid serv request cache. Instead use a base32 encoded descriptor ID
contained in the rend_data_t object.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Every callsite that use to allocate a rend_data_t object now use the
rend_data_client/service_create() function.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Ground works for fixing #15816. This adds the rend_data_create() function in
order to have a single place where we initialize that data structure.
Furthermore, an array of descriptor IDs is added (one per replica) so we can
keep a copy of the current id in the object. It will be used to purge the
last hid serv request cache using those descriptor IDs. When they change,
they will be replaced and the old ones will be purged from the cache.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Fixes#15850, part of #15801. Change file is added by this commit. The
original comment in the reverted commit is removed because right now we
*need* a DirPort until #15849 is implemented so no doubt nor confusion there
anymore.
This reverts commit 80bed1ac96.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
These commands allow for the creation and management of ephemeral
Onion ("Hidden") services that are either bound to the lifetime of
the originating control connection, or optionally the lifetime of
the tor instance.
Implements #6411.
The SH_LOG_COMPILER feature doesn't work with older automakes, and
those are still in use in many environments we want to support
development on, like Debian Stable.
Instead, use autoconf substitution to fill out the shebang lines on
the shell scripts, and an intermediate make target to make them
executable.
This is a bugfix on the patches for #15344. Bug not in any released
tor.
When we made assertions not get compiled in for the coverage case, we
missed one case where, for our tests, we really DO want to have an
assertion fail: the backtrace test.
Bugfix on 1228dd293b60a8eaab03472fa29428c5e2752c44; bug not in any
released tor
The "longest possible policy" comment in
router_parse_addr_policy_item_from_string() used an example policy
that was actually shorter than the maximum length.
This comment was amended, and expanded to count the maximum number of
characters.
Comment change only.
For this to work bt_test.py now returns an exit code indicating success or
failure. Additionally, check-local and its specific dependencies are now
obsolete so they are removed.
The zero length keys test now requires the path to the Tor binary as the first
parameter to ensure the correct Tor binary is used without hard coding a path.
The wrapper script calls the zero length keys test for each test separately to
ensure the correct shell is used (as configured by autoconf). Another solution
would have been to place the tests into separate functions so multiple tests
could be run internally. This would have made a diff of considerable size and
frankly it is outside the scope of this fix.
Unit tests for the 10 valid combinations of set/NULL config options
DirAuthorities, AlternateBridgeAuthority, AlternateDirAuthority,
and FallbackDir.
Add assertion in consider_adding_dir_servers() for checks in
validate_dir_servers():
"You cannot set both DirAuthority and Alternate*Authority."
Only add the default fallback directories when the DirAuthorities,
AlternateDirAuthority, and FallbackDir directory config options
are set to their defaults.
The default fallback directory list is currently empty, this fix will
only change tor's behaviour when it has default fallback directories.
Fixes bug 15642; bugfix on 90f6071d8d in 0.2.4.7-alpha. Patch by "teor".
When self-testing reachability, use ExtendAllowPrivateAddresses
to determine if local/private addresses imply reachability.
The previous fix used TestingTorNetwork, which implies
ExtendAllowPrivateAddresses, but this excluded rare configs where
ExtendAllowPrivateAddresses is set but TestingTorNetwork is not.
Fixes bug 15771; bugfix on 0.2.6.1-alpha, bug #13924.
Patch by "teor", issue discovered by CJ Ess.
The HS_DESC_CONTENT event results in multiple line thus must be prefixed
with a "650+" and ending with "650 OK".
Reported-by: Damian Johnson <atagar@torproject.org>
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The HS_DESC event was using rend_data_t from the dir connection to reply the
onion address and authentication type. With the new HSFETCH command, it's
now possible to fetch a descriptor only using the descriptor id thus
resulting in not having an onion address in any HS_DESC event.
This patch removes rend_query from the hs desc control functions and replace
it by an onion address string and an auth type.
On a successful fetch, the service id is taken from the fetched descriptor.
For that, an extra parameter is added to "store as a client" function that
contains the cache entry stored.
This will make the control event functions scale more easily over time if
other values not present in rend_data_t are needed since the rend_data from
the dir connection might not contained everything we need.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Big refactor of the HS client descriptor fetch functionnality. This allows
to fetch an HS descriptor using only a descriptor ID. Furthermore, it's also
possible to provide a list of HSDir(s) now that are used instead of the
automatically choosen one.
The approach taken was to add a descriptor_id field to the rend_data_t
structure so it can be used, if available, by the HS client. The onion
address field however has priority over it that is if both are set, the
onion address is used to fetch the descriptor.
A new public function is introduced called rend_client_fetch_v2_desc(...)
that does NOT lookup the client cache before fetching and can take a list of
HSDirs as a parameter.
The HSFETCH control command now uses this new function thus making it work
and final.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
As defined in section 4.1.26 in the control-spec.txt, this new event replies
the content of a successfully fetched HS descriptor. This also adds a unit
test for the controller event.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This adds the command on the controller side that parses and validate
arguments but does nothing for now. The HS desriptor fetch must be
modularized a bit more before we can use the command.
See control-spec.txt section 3.26 for more information on this command.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Incidently, this fixes a bug where the maximum value was never used when
only using crypto_rand_int(). For instance this example below in
rendservice.c never gets to INTRO_POINT_LIFETIME_MAX_SECONDS.
int intro_point_lifetime_seconds =
INTRO_POINT_LIFETIME_MIN_SECONDS +
crypto_rand_int(INTRO_POINT_LIFETIME_MAX_SECONDS -
INTRO_POINT_LIFETIME_MIN_SECONDS);
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
An introduction point is currently rotated when the amount of INTRODUCE2
cells reached a fixed value of 16384. This makes it pretty easy for an
attacker to inflate that number and observe when the IP rotates which leaks
the popularity of the HS (amount of client that passed through the IP).
This commit makes it a random count between the current value of 16384 and
two times that.
Fixes#15745
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Till someone writes get_interface_address6 interface enumeration that is
routing table aware, these tests will continue to fail on certain
systems because the get_interface_address6() code is broken.
We no longer base our opinion on whether someone is a directory solely
on the routerstatus we might have for that relay, but also on a
routerinfo. Remove logic in test checking that. This broke unit tests in
05f7336624.
Reported by toralf on #tor-dev, thanks!
This uses a Linux-ism to attempt to always clean up background processes
if possible. Note that it is not a catch-all, in that executables with
suid/sgid or elevated capabilities will have the prctl() attribute
stripped as part of the execve().
Resolves ticket 15471.
Background processes spawned by Tor now will have a valid stdin.
Pluggable transports can detect this behavior with the aformentioned
enviornment variable, and exit if stdin ever gets closed.
The compiler is allowed to assume that a "uint64_t *" is aligned
correctly, and will inline a version of memcpy that acts as such.
Use "uint8_t *", so the compiler does the right thing.
It invokes undefined behavior, I'm afraid, since there's no other
c-legal way to test whether memwipe() works when we're not allowed to
look at it.
Closes ticket 15377.
The rend-spec.txt document doesn't specify this extra newline. Furthermore,
this is the only descryptor type that contains one. Client and HSDir without
this patch still work perfectly since the HS descriptor parsing doesn't
expect a newline at the end.
Fixes#15296
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
On clang (and elsewhere?) __PRETTY_FUNCTION__ includes parenthesized
argument lists. This is clever, but it makes our old "%s(): " format
look funny.
This is a fix on 0957ffeb, aka svn:r288. Fixes bug 15269.
Remove src/or/or_sha1.i and src/common/common_sha1.i on `make clean` and remove
the temporary micro-revision file when its no longer needed.
Additional changes;
- show a message when generating the micro-revision file.
- add the temporary micro revision file to the list of files to be removed on
`make clean` just in case.
- fix indentation of the make rule to improve readability.
PTs expect the auth cookie to be available immedieately after launch,
leading to a race condition when PTs opt to cache the extorport cookie
once immediately after startup.
Fixes#15240.
When calling pthread_attr_setdetachstate, we were using 1 as the
argument. But the pthreads documentation says that you have to say
PTHREAD_CREATE_DETACH, which on Solaris is apparently 0x40. Calling
pthread_attr_setdetachstate with 1 crashes on Solaris with FLTBOUNDS.
(Because we're so late in the release cycle, I made the code define
PTHREAD_CREATE_DETACHED if it doesn't exist, so we aren't likely to
break any other platforms.)
This bug was introduced when we made threading mandatory in
0.2.6.1-alpha; previously, we had force-disabled threading on
Solaris. See #9495 discussion.
Report errors if the notification fails; report success only if it
succeeds; and if we are not notifying systemd because we aren't
running with systemd, don't log at notice.
We already log whenever our state changes, e.g. whenever new directory
information arrives. This additional log_warn() will at best just add more
log messages, or worse, make the user wonder what she needs to fix.
(Changed after consultation with Yawning.)
Nothing ever uses the string when we're in "have minimum dir info"
state. The flow of the function is "check for problems, if you see a
problem write an explanation to dir_info_status and set res to 0". If
you get to the end of the function without any problems, then res =
1 and we're all ready to start making circuits.
(Changed after consultation with Yawning.)
Parse the file just before voting and apply its information to the
provided vote_routerstatus_t. This follows the same logic as when
dirauths parse bwauth files.
`dir_info_status` is used from main.c:directory_info_has_arrived() to
provide useful (INFO/NOTICE) level logging to users, and should always
be updated regardless of the rate limiting.
This adds the key "hs/client/desc/id/<ADDR>" to the GETINFO command used to
lookup the given onion address in the client hs descriptor cache.
If found, prints it formatted as specified in section 1.3 of rend-spec.txt.
Fixes#14845
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The idea here is that a controller should be able to make Tor produce a
new relay descriptor on demand, without that descriptor actually being
uploaded to the dirauths (they would likely reject it anyway due to
freshness concerns).
Implements #14784.
Allow building a router descriptor without storing it to global state.
This is in preparation of a patch to export the created descriptors via
the control port.
The issue is that we use the cpuworker system with relays only, so if we
start up as a client and transition to being a relay later, we'll be
sad.
This fixes bug 14901; not in any released version of Tor.
__libc_message() tries to open /dev/tty with O_RDWR, but the sandbox
catches that and calls it a crash. Instead, I'm making the sandbox
setenv LIBC_FATAL_STDERR_, so that glibc uses stderr instead.
Fix for 14759, bugfix on 0.2.5.1-alpha
They have been off-by-default since 0.2.5 and nobody has complained. :)
Also remove the buf_shrink() function, which hasn't done anything
since we first stopped using contiguous memory to store buffers.
Closes ticket 14848.
This fixes a bug where we decide to free the circuit because it isn't on
any workqueue anymore, and then the job finishes and the circuit gets
freed again.
Fixes bug #14815, not in any released version of Tor.
like might happen for Tails or Whonix users who start with a very wrong
hardware clock, use Tor to discover a more accurate time, and then
fix their clock.
Resolves part of ticket 8766.
(There are still some timers in various places that aren't addressed yet.)
Before a couple weeks ago didn't know Tor had these tests, interesting! Stem
already has tests for spawning tor processes but lacked any with this targeted
focus on its arguments.
I've added our own counterpart for these tests. Many are direct copies but
there were others I improved a little...
https://trac.torproject.org/projects/tor/ticket/14109https://gitweb.torproject.org/stem.git/commit/?id=137d193a026638f066e817e3396cebbbb6ace012
Now that Tor uses Stem to supplement its tests no reason for these to live
separately. Tested by simply building tor and confirming test_cmdline_args.py
is no longer in the generated Makefile.
In #14803, Damian noticed that his Tor sometimes segfaults. Roger noted
that his valgrind gave an invalid write of size one here. Whenever we
use FLEXIBLE_ARRAY_MEMBER, we have to make sure to actually malloc a
thing that's large enough.
Fixes bug #14803, not in any released version of Tor.
Check if each smartlist is NULL before calling SMARTLIST_FOREACH on it.
Bug discovered by the clang static analyzer.
Apple clang 600.0.56 (LLVM 3.5svn) on x86_64-apple-darwin14.1.0.
If the guard unreachable_since variable was set, the status "up" was
reported which is wrong. This adds the "down" status followed by the
unreachable_since time value.
Fixes#14184
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Shell exit values must fall into the range of [0-255], so let's honour
this. In practice, the "exit -1" from the old code set an exit value of
255 on most systems, so let's pick that.
Fixes part of bug #14478, patch idea suggested by an anonymous
contributor. Thanks!
David Goulet finds that when he runs a busy relay for a while with the
latest version of the git code, the number of onionskins handled
slowly dwindles to zero, with total_pending_tasks wedged at its
maximum value.
I conjecture this is because the total_pending_tasks variable isn't
decremented when we successfully cancel a job. Fixed that.
Fixes bug 14741; bugfix not on any released version of tor.
This both fixes the problem, and ensures that forgetting to update
domain_list in the future will trigger the bug codepath instead of
a NULL pointer deref.
Ordinarily, get_options() can never return NULL, but with
test_status.c mocking, it can. So test for that case.
The best fix here would be to pass the options value to a
bridge_server_mode() function.
After connectivity problems, only try connecting to bridges which
are currently configured; don't mark bridges which we previously
used but are no longer configured. Fixes 14216. Reported by
and fix provided by arma.
If the returned value of read/recv is 0 (meaning EOF), we'll end up in an
infinite loop (active wait) until something is written on the pipe which is
not really what we want here especially because those functions are called
from the main thread.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
It's now possible to use SocksPort or any other kind of port that can use a
Unix socket like so:
SocksPort unix:/foo/bar/unix.sock
Fixes#14451
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Introduces two new circuit status name-value parameters: SOCKS_USERNAME
and SOCKS_PASSWORD. Values are enclosing in quotes and unusual characters
are escaped.
Example:
650 CIRC 5 EXTENDED [...] SOCKS_USERNAME="my_username" SOCKS_PASSWORD="my_password"
Here is why:
1) v0 descriptors are deprecated since 0.2.2.1 and not suppose to be alive
in the network anymore. This function should only serve v2 version for now
as the default.
2) It should return different error code depending on what's the actual
error is. Right now, there is no distinction between a cache entry not found
and an invalid query.
3) This function should NOT test if the intro points are usable or not. This
adds some load on a function that should be "O(1)" and do one job.
Furthermore, multiple callsites actually already test that doing twice the
job...
4) While adding control event, it would be useful to be able to lookup a
cache entry without having it checking the intro points. There are also
places in the code that do want to lookup the cache entry without doing
that.
Fixes#14391
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This is to avoid that the pthread_cond_timedwait() is not affected by time
adjustment which could make the waiting period very long or very short which
is not what we want in any cases.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Also, do a little light refactoring to move some variable declarations
around and make a few things const
Also fix an obnoxious bug on checking for the DONE stream end reason.
It's not a flag; it's a possible value or a variable that needs to be
masked.
Once a NACK is received on the intro circuit, tor tries an other usable one
by extending the current circuit to it. If no more intro points are usable,
now close the circuit. Also, it's reason is changed before closing it so we
don't report again an intro point failure and trigger an extra HS fetch.
Fixes#14224
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Once a NACK is received on the intro circuit, tor tries an other usable one
by extending the current circuit to it. If no more intro points are usable,
now close the circuit.
Fixes#14224
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This fixes a bug where we'd fetch different replicas of the same
descriptor for a down hidden service over and over, until we got lucky
and fetched the same replica twice in a row.
Fixes bug 14219; bugfix on 0.2.0.10-alpha.
(Patch from Roger; commit message and changes file by Nick.)
We've started to hit the limit here. We introduced the limit in
0.1.2.5-alpha. This fixes bug 14261, but we should have a smarter way
to not actually do the behavior this permits. See #14267 for a ticket
about fixing that.
This incidentally makes unix SocksSocket support all the same options
as SocksPort.
This patch breaks 'SocksSocket 0'; next will restore it.
Resolves 14254.
