If a node can prove its Ed25519 identity, don't consider connections
to it canonical unless they match both identities.
Includes link handshake changes needed to avoid crashing with bug
warnings, since the tests now reach more parts of the code.
Closes ticket 20355
(Only run the connection_or_group_set_badness_() function on groups
of channels that have the same RSA and Ed25519 identities.)
There's a possible opportunity here where we might want to set a
channel to "bad" if it has no ed25519 identity and some other
channel has some. Also there's an opportunity to add a warning if
we ever have an Ed mismatch on open connections with the same RSA
ID.
This function has never gotten testing for the case where an
identity had been set, and then got set to something else. Rather
than make it handle those cases, we forbid them.
If there is some horrible bug in our ed25519 link authentication
code that causes us to label every single ed25519-having node as
non-running, we'll be glad we had this. Otherwise we can remove it
later.
This patch makes two absolutely critical changes:
- If an ed25519 identity is not as expected when creating a channel,
we call that channel unsuccessful and close it.
- When a client creating a channel or an extend cell for a circuit, we
only include the ed25519 identity if we believe that the node on
the other side supports ed25519 link authentication (from
#15055). Otherwise we will insist on nodes without the right
link protocol authenticating themselves.
- When deciding to extend to another relay, we only upgrade the
extend to extend by ed25519 ID when we know the ed25519 ID _and_
we know that the other side can authenticate.
This patch also tells directory servers, when probing nodes, to
try to check their ed25519 identities too (if they can authenticate
by ed25519 identity).
Also, handle the case where we connect by RSA Id, and learn the
ED25519 ID for the node in doing so.
I need to be able to turn on Ed25519 support in client generation
of extend cells so I can test it, but leave it off-by-default until
enough clients support it for us to turn it on for a bunch at once.
This is part of #15056 / prop#220.
- forbid extending to the previous hop by Ed25519 ID.
- If we know the Ed25519 ID for the next hop and the client doesn't,
insist on the one from the consensus.
Right now, there's only a mechanism to look for a channel where the
RSA ID matches *and* the ED ID matches. We can add a separate map
later if we want.
They added clock_gettime(), but with tv_nsec as a long, whereas
tv_usec is a __darwin_suseconds_t (a.k.a. 'int'). Now, why would
they do that? Are they preparing for a world where there are more
than 2 billion nanoseconds per second? Are they planning for having
int be less than 32 bits again? Or are they just not paying
attention to the Darwin API?
Also, they forgot to mark clock_gettime() as Sierra-only, so even
if we fixed the issue here, we'd still be stick with portability
breakage like we were for 0.2.9.
So, just disable clock_gettime() on apple.
Tor 0.2.9 has a broader range of fixes and workarounds here, but for
0.2.8, we're just going to maintain the existing behavior.
(The alternative would be to backport both
1eba088054 and
16fcbd21c9 , but the latter is kind of
a subtle kludge in the configure.ac script, and I'm not a fan of
backporting that kind of thing.)
(OpenSSL 1.1 makes EVP_CIPHER_CTX opaque, _and_ adds acceleration
for counter mode on more architectures. So it won't work if we try
the older approach, and it might help if we try the newer one.)
Fixes bug 20588.
This resolves two issues:
* the checks in rend_add_services were only being performed when adding
the service, and not when the service was validated,
(this meant that duplicate checks were not being performed, and some SETCONF
commands appeared to succeed when they actually failed), and
* if one service failed while services were being added, then the service
list would be left in an inconsistent state (tor dies when this happens,
but the code is cleaner now).
Fixes#20860.
When computing old Tor protocol line version in protover, we were looking at
0.2.7.5 twice instead of the specific case for 0.2.9.1-alpha.
Fixes#20810
Signed-off-by: David Goulet <dgoulet@torproject.org>
Coverity doesn't like it when there are paths to the end of the
function where something doesn't get freed, even when those paths
are only reachable on unit test failure.
Fixes CID 1372899 and CID 1372900. Bug not in any released Tor.
newconn->address is strdup'ed twice when new_type == CONN_TYPE_AP
and conn->socket_family == AF_UNIX. Whilst here, juggle code to
make sure newconn->port is assigned from an initialised value in
the above case.
Instead, refuse to start tor until the misconfigurations have been corrected.
Fixes bug 20559; bugfix on multiple commits in 0.2.7.1-alpha and earlier.
Instead, refuse to start tor if any hidden service key has been used in
a different hidden service anonymity mode.
Fixes bug 20638; bugfix on 17178 in 0.2.9.3-alpha; reported by ahf.
The original single onion service poisoning code checked poisoning state
in options_validate, and poisoned in options_act. This was problematic,
because the global array of hidden services had not been populated in
options_validate (and there were ordrering issues with hidden service
directory creation).
This patch fixes this issue in rend_service_check_dir_and_add, which:
* creates the directory, or checks permissions on an existing directory, then
* checks the poisoning state of the directory, then
* poisons the directory.
When validating, only the permissions checks and the poisoning state checks
are perfomed (the directory is not modified).
To do this, it makes sense to treat legacy guards as a separate
guard_selection_t *, and handle them separately. This also means we
add support here for having multiple guard selections.
Note that we don't persist pathbias information yet; that will take
some refactoring.
This patch doesn't cover every case; omitted cases are marked with
"XXXX prop271", as usual. It leaves both the old interface and the
new interface for guard status notification, since they don't
actually work in the same way: the new API wants to be told when a
circuit has failed or succeeded, whereas the old API wants to know
when a channel has failed or succeeded.
I ran into some trouble with directory guard stuff, since when we
pick the directory guard, we don't actually have a circuit to
associate it with. I solved that by allowing guard states to be
associated with directory connections, not just circuits.
I expect we'll be ripping this out somewhere in 0.3.0, but let's
keep it around for a little while in case it turns out to be the
only way to avert disaster?
This state corresponds to the WAITING_FOR_BETTER_GUARD state; it's
for circuits that are 100% constructed, but which we won't use until
we are sure that we wouldn't use circuits with a better guard.
When a nonprimary guard's circuit is complete, we don't call it
actually usable until we are pretty sure that every better guard
is indeed not going to give us a working circuit.
Here we add a little bit of state to origin circuits, and set up
the necessary functions for the circuit code to call in order to
find guards, use guards, and decide when circuits can be used.
There's also an incomplete function for the hard part of the
circuit-maintenance code, where we figure out whether any waiting
guards are ready to become usable.
(This patch finally uses the handle.c code to make safe handles to
entry_guard_t objects, so that we are allowed to free an
entry_guard_t without checking whether any origin_circuit_t is
holding a reference to it.)
This code handles:
* Maintaining the sampled set, the filtered set, and the
usable_filtered set.
* Maintaining the confirmed and primary guard lists.
* Picking guards for circuits, and updating guard state when
circuit state changes.
Additionally, I've done code structure movement: even more constants
and structures from entrynodes.c have become ENTRYNODES_PRIVATE
fields of entrynodes.h.
I've also included a bunch of documentation and a bunch of unit
tests. Coverage on the new code is pretty high.
I've noted important things to resolve before this branch is done
with the /XXXX.*prop271/ regex.
These are taken from the proposal, and defined there. Some of them
should turn into consensus parameters.
Also, remove some dead code that was there to make compilation work,
and use ATTR_UNUSED like a normal person.
The previous commit, in moving a bunch of functions to bridges.c,
broke compilation because bridges.c required two entry points to
entrynodes.c it didn't have.
This patch is just:
* Code movement
* Adding headers here and there as needed
* Adding a bridges_free_all() with a call to it.
It breaks compilation, since the bridge code needed to make exactly
2 calls into entrynodes.c internals. I'll fix those in the next
commit.
The encoding code is very straightforward. The decoding code is a
bit tricky, but clean-ish. The sampling code is untested and
probably needs more work.
This was a relatively mechanical change. First, I added an accessor
function for the pathbias-state field of a guard. Then I did a
search-and-replace in circpathbias.c to replace "guard->pb." with
"pb->". Finally, I made sure that "pb" was declared whenever it was
needed.
The entry_guard_t structure should really be opaque, so that we
can change its contents and have the rest of Tor not care.
This commit makes it "mostly opaque" -- circpathbias.c can still see
inside it. (I'm making circpathbias.c exempt since it's the only
part of Tor outside of entrynodes.c that made serious use of
entry_guard_t internals.)
This affects clients with FetchUselessDescriptors 1.
It might also cause subtle bugs on directory mirrors and authorities,
causing them to consider all full descriptors as failed or old.
Improve the messages logged when Tor wants or needs to load the master ed25519 identity key so the user is explicitly informed when further action is required or not. Fixes ticket #20650.
(We only create HS directories if we are acting on the config.)
Log a BUG warning if the directories aren't present immediately before they
are used, then fail.
For relays that don't know their own address, avoid attempting
a local hostname resolve for each descriptor we download. Also cut
down on the number of "Success: chose address 'x.x.x.x'" log lines.
Fixes bugs 20423 and 20610; bugfix on 0.2.8.1-alpha.
Single onion services and Tor2web deliberately create long-term one-hop
circuits to their intro and rend points, respectively.
These log messages are intended to diagnose issue 8387, which relates to
circuits hanging around forever for no reason.
Fixes bug 20613; bugfix on 0.2.9.1-alpha. Reported by "pastly".
It's not okay to use the same varargs list twice, and apparently
some windows build environments produce code here that would leave
tor_asprintf() broken. Fix for bug 20560; bugfix on 0.2.2.11-alpha
when tor_asprintf() was introduced.
This field indicates if the service is a Single Onion Service if present in
the descriptor.
Closes#19642
Signed-off-by: David Goulet <dgoulet@torproject.org>
Because as Teor puts it: "[Resetting on 503] is exactly what we
don't want when relays are busy - imagine clients doing an automatic
reset every time they DoS a relay..."
Fixes bug 20593.
The test was broken and skipped because the hardcoded cross certificate didn't
include the dynamically generated signing key generated by the test. The only
way we could have fixed that is extracting the signing key from the hardcoded
string and put it in the descriptor object or dynamically generate the cross
certificate.
In the end, all this was kind of pointless as we already test the decoding of
multiple introduction points elsewhere and we don't gain anything with that
specific test thus the removal.
Fixes#20570
Signed-off-by: David Goulet <dgoulet@torproject.org>
As of #19899, we decided to allow any relay understanding the onion service
version 3 protocol to be able to use it. The service and client will be the
one controlled by a consensus parameter (different one for both of them) but
if you are a relay and you can understand a protocol, basically you should use
the feature.
Closes#19899
Signed-off-by: David Goulet <dgoulet@torproject.org>
It's only safe to remove the failure limit (per 20536) if we are in
fact waiting a bit longer each time we try to download.
Fixes bug 20534; bugfix on 0.2.9.1-alpha.
If a consensus expires while we are waiting for certificates to download,
stop waiting for certificates.
If we stop waiting for certificates less than a minute after we started
downloading them, do not consider the certificate download failure a
separate failure.
Fixes bug 20533; bugfix on commit e0204f21 in 0.2.0.9-alpha.
Relays do not deliberately launch multiple attempts, so the impact of this
bug should be minimal. This fix also defends against bugs like #20499.
Bugfix on 0.2.8.1-alpha.
(OpenSSL 1.1 makes EVP_CIPHER_CTX opaque, _and_ adds acceleration
for counter mode on more architectures. So it won't work if we try
the older approach, and it might help if we try the newer one.)
Fixes bug 20588.
Note that the "signed key" in the signing key certificate is the
signing key. The "signing key" in the signing key certificate is
the key that signs the certificate -- that is, the blinded key.
This parameter controls if onion services version 3 (first version of prop224)
is enabled or not. If disabled, the tor daemon will not support the protocol
for all components such as relay, directory, service and client. If the
parameter is not found, it's enabled by default.
Closes#19899
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
This implements the proposal 224 directory descriptor cache store and lookup
functionalities. Furthermore, it merges the OOM call for the HSDir cache with
current protocol v2 and the new upcoming v3.
Add hs_cache.{c|h} with store/lookup API.
Closes#18572
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Add hs_descriptor.{c|h} with the needed ABI to represent a descriptor and
needed component.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Also add a trunnel definition for link_specifier_list
Signed-off-by: John Brooks <special@torproject.org>
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
In order to implement proposal 224, we need the data structure rend_data_t to
be able to accomodate versionning that is the current version of hidden
service (2) and the new version (3) and future version.
For that, we implement a series of accessors and a downcast function to get
the v2 data structure. rend_data_t becomes a top level generic place holder.
The entire rend_data_t API has been moved to hs_common.{c|h} in order to
seperate code that is shared from between HS versions and unshared code (in
rendcommon.c).
Closes#19024
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
One is fixed by disabling the -Wredundant-decls warnings around
openssl headers here, because of the old double-declaration of
SSL_get_selected_srtp_profile().
One is fixed by including compat.h before or.h so that we get the
winsock2.h include before the windows.h include.
In our code to write public keys to a string, for some unfathomable
reason since 253f0f160e, we would allocate a memory BIO, then
set the NOCLOSE flag on it, extract its memory buffer, and free it.
Then a little while later we'd free the memory buffer with
BUF_MEM_free().
As of openssl 1.1 this doesn't work any more, since there is now a
BIO_BUF_MEM structure that wraps the BUF_MEM structure. This
BIO_BUF_MEM doesn't get freed in our code.
So, we had a memory leak!
Is this an openssl bug? Maybe. But our code was already pretty
silly. Why mess around with the NOCLOSE flag here when we can just
keep the BIO object around until we don't need the buffer any more?
Fixes bug 20553; bugfix on 0.0.2pre8
This function is allowed to return NULL if the certified key isn't
RSA. But in a couple of places we were treating this as a bug or
internal error, and in one other place we weren't checking for it at
all!
Caught by Isis during code review for #15055. The serious bug was
only on the 15055 branch, thank goodness.
All supported Tors (0.2.4+) require versions of openssl that can
handle this.
Now that our link certificates are RSA2048, this might actually help
vs fingerprinting a little.
This was a stopgap method, designed on the theory that some routers
might support it before they could support Ed25519. But it looks
like everybody who supports RFC5705 will also have an Ed25519 key,
so there's not a lot of reason to have this even supported.
This patch moves the pregenerated RSA key logic into a new
testing_rsakeys.c.
Also, it adds support for RSA2048, since the link handshake tests
want that.
Also, it includes pregenerated keys, rather than trying to actually
generate the keys at startup, since generating even a small handful
of RSA2048 keys makes for an annoying delay.
This code stores the ed certs as appropriate, and tries to check
them. The Ed25519 result is not yet used, and (because of its
behavior) this will break RSA authenticate cells. That will get
fixed as we go, however.
This should implement 19157, but it needs tests, and it needs
to get wired in.
In particular, these functions are the ones that set the identity of
a given connection or channel, and/or confirm that we have learned
said IDs.
There's a lot of stub code here: we don't actually need to use the
new keys till we start looking up connections/channels by Ed25519
IDs. Still, we want to start passing the Ed25519 IDs in now, so it
makes sense to add these stubs as part of 15055.
The impact here isn't too bad. First, the only affected certs that
expire after 32-bit signed time overflows in Y2038. Second, it could
only make it seem that a non-expired cert is expired: it could never
make it seem that an expired cert was still live.
Fixes bug 20027; bugfix on 0.2.7.2-alpha.
Also, adjust signing approach to more closely match the signing
scheme in the proposal.
(The format doesn't quite match the format in the proposal, since
RSA signatures aren't fixed-length.)
Closes 19020.
See proposal 244. This feature lets us stop looking at the internals
of SSL objects, *and* should let us port better to more SSL libraries,
if they have RFC5705 support.
Preparatory for #19156
We no longer generate certs cells by pasting the certs together one
by one. Instead we use trunnel to generate them.
Preliminary work for 19155 (send CERTS cell with ed certs)
passthrough_test_setup doesn't pass through arguments if the argument
is equal to 0 or TT_SKIP. Instead, it fails or skips the test.
Assert on this, so we don't accidentally fail or skip tests.
Fixes bug 19969; bugfix on b1d56fc58. We can fix this some more in
later Tors, but for now, this is probably the simplest fix possible.
This is a belt-and-suspenders fix, where the earlier fix ("Ask
event_base_loop to finish when we add a pending stream") aims to respond
to new streams as soon as they arrive, and this one aims to make sure
that we definitely respond to all of the streams.
ome policies are default-reject, some default-accept. But
policy_is_reject_star() assumed they were all default_reject. Fix
that!
Also, document that policy_is_reject_star() treats a NULL policy as
empty. This allows us to simplify the checks in
parse_reachable_addresses() by quite a bit.
Fxes bug 20306; bugfix on 0.2.8.2-alpha.
(Also, refactor the code to create a hidden service directory into a
separate funcion, so we don't have to duplicate it.)
Fixes bug 20484; bugfix on 0.2.9.3-alpha.
This simplifies the function: if we have an ntor key, use ntor/EXTEND2,
otherwise, use TAP/EXTEND.
Bugfix on commit 10aa913 from 19163 in 0.2.9.3-alpha.
I had replaced a comment implying that a set of ifs was meant to be
exhaustive with an actual check for exhaustiveness. It turns out,
they were exhaustive, but not in the way I had assumed. :(
Bug introduced in f3e158edf7, not in any released Tor.
Use the following coccinelle script to change uses of
smartlist_add(sl, tor_strdup(str)) to
smartlist_add_strdup(sl, string) (coccinelle script from nickm
via bug 20048):
@@
expression a;
expression b;
@@
- smartlist_add
+ smartlist_add_strdup
(a,
- tor_strdup(
b
- )
)
The tor_fragile_assert() bug has existed here since c8a5e2d588
in tor-0.2.1.7-alpha forever, but tor_fragile_assert() was mostly a
no-op until 0.2.9.1-alpha.
Fixes bug 19869.
When we refactored purpose_needs_anonymity(), we made it so _all_
bridge requests required anonymity. But that missed the case
that we are allowed to ask a bridge for its own descriptor.
With this patch, we consider the resource, and allow "authority.z"
("your own descriptor, compressed") for a bridge's server descriptor
to be non-anonymous.
Fix for bug 20410; bug not in any released Tor.
I believe that this should never trigger, but if it does, it
suggests that there was a gap between is_sensitive_dir_purpose and
purpose_needs_anonymity that we need to fill. Related to 20077.
This helps protect against bugs where any part of a buf_t's memory
is passed to a function that expects a NUL-terminated input.
It also closes TROVE-2016-10-001 (aka bug 20384).
This commit adds or improves the module-level documenation for:
buffers.c circuitstats.c command.c connection_edge.c control.c
cpuworker.c crypto_curve25519.c crypto_curve25519.h
crypto_ed25519.c crypto_format.c dircollate.c dirserv.c dns.c
dns_structs.h fp_pair.c geoip.c hibernate.c keypin.c ntmain.c
onion.c onion_fast.c onion_ntor.c onion_tap.c periodic.c
protover.c protover.h reasons.c rephist.c replaycache.c
routerlist.c routerparse.c routerset.c statefile.c status.c
tor_main.c workqueue.c
In particular, I've tried to explain (for each documented module)
what each module does, what's in it, what the big idea is, why it
belongs in Tor, and who calls it. In a few cases, I've added TODO
notes about refactoring opportunities.
I've also renamed an argument, and fixed a few DOCDOC comments.
(I've done this instead of changing the semantics of
router_compare_to_my_exit_policy, because dns.c uses
router_compare_to_my_exit_policy too, in a slightly weird way.)
Some compilers apparently noticed that p2len was allowed to be equal
to msg, and so maybe we would be doing memset(prompt2, ' ', 0), and
decided that we probably meant to do memset(prompt2, 0, 0x20);
instead.
Stupid compilers, doing optimization before this kind of warning!
My fix is to just fill the entire prompt2 buffer with spaces,
because it's harmless.
Bugfix on e59f0d4cb9, not in any released Tor.
(Specifically, carriage return after a quoted value in a config
line. Fixes bug 19167; bugfix on 0.2.0.16-alpha when we introduced
support for quoted values. Unit tests, changes file, and this
parenthetical by nickm.)
This is a kludge to deal with the fact that `tor_addr_t` doesn't contain
`sun_path`. This currently ONLY happens when circuit isolation is being
checked, for an isolation mode that is force disabled anyway, so the
kludge is "ugly but adequate", but realistically, making `tor_addr_t`
and the AF_UNIX SocksPort code do the right thing is probably the better
option.
Closes ticket 20303.
The LIBRESSL_VERSION_NUMBER check is needed because if our openssl
is really libressl, it will have an openssl version number we can't
really believe.
Previously, we would reject even rendezvous connections to IPv6
addresses when IPv6Exit was false. But that doesn't make sense; we
don't count that as "exit"ing. I've corrected the logic and tried
to make it a lottle more clear.
Fixes bug 18357; this code has been wrong since 9016d9e829 in
0.2.4.7-alpha.
When deleting unsuitable addresses in get_interface_address6_list(), to
avoid reordering IPv6 interface addresses and keep the order returned by
the OS, use SMARTLIST_DEL_CURRENT_KEEPORDER() instead of
SMARTLIST_DEL_CURRENT().
This issue was reported by René Mayrhofer.
[Closes ticket 20163; changes file written by teor. This paragraph
added by nickm]
We removed that feature in 0.2.4.2-alpha, but some comments seem to
have lingered.
I didn't add a changes/ file since this is just internal code cleanup.
(like clients do) rather than old-style router descriptors. Now bridges
will blend in with clients in terms of the circuits they build.
Fixes bug 6769; bugfix on 0.2.3.2-alpha.
Clients that use bridges were ignoring their cached microdesc-flavor
consensus files, because they only thought they should use the microdesc
flavor once they had a known-working bridge that could offer microdescs,
and at first boot no bridges are known-working.
This bug caused bridge-using clients to download a new microdesc consensus
on each startup.
Fixes bug 20269; bugfix on 0.2.3.12-alpha.
The client addr is essentially meaningless in this context (yes, it is
possible to explicitly `bind()` AF_LOCAL client side sockets to a path,
but no one does it, and there are better ways to grant that sort of
feature if people want it like using `SO_PASSCRED`).
As before, we check server protocols whenever server_mode(options)
is true and we check client protocols whenever server_mode(options)
is false.
Additionally, we now _also_ check client protocols whenever any
client port is set.
(Technically, we could just remove extend2 cell checking entirely,
since all Tor versions on our network are required to have it, but
let's keep this around as an example of How To Do It.)
(Despite the increased size of the consensus, this should have
approximately zero effect on the compressed consensus size, since
the "proto" line should be completely implied by the "v" line.)
[This is a brute-force method that potentially uses way too much
RAM. Need to rethink this a little. Right now you can DOS an
authority by saying "Foo=1-4294967295".]
Sierra provides clock_gettime(), but not pthread_condattr_setclock.
So we had better lot try to use CLOCK_MONOTONIC as our source for
time when waiting, since we ccan never actually tell the condition
that we mean CLOCK_MONOTONIC.
This isn't a tor bug yet, since we never actually pass a timeout to
tor_cond_wait() outside of the unit tests.
Not telling the cmux would sometimes cause an assertion failure in
relay.c when we tried to get an active circuit and found an "active"
circuit with no cells.
Additionally, replace that assert with a test and a log message.
Fix for bug 20203. This is actually probably a bugfix on
0.2.8.1-alpha, specifically my code in 8b4e5b7ee9 where I
made circuit_mark_for_close_() do less in order to simplify our call
graph. Thanks to "cypherpunks" for help diagnosing.
Our use of the (mockable) tor_close_socket() in the util/socket_..
tests confused coverity, which could no longer tell that we were
actually closing the sockets.
It's a macro that calls down to a function whose behavior has been
getting progresively more complicated.... but we named it as if it
were a variable. That's not so smart. So, replace it with a
function call to a function that was just doing "return
current_consensus".
Fixes bug 20176.
Commit 41cc1f612b introduced a "dns_request"
configuration value which wasn't set to 1 for an entry connection on the
DNSPort leading to a refusal to resolve the given hostname.
This commit set the dns_request flag by default for every entry connection
made to the DNSPort.
Fixes#20109
Signed-off-by: David Goulet <dgoulet@torproject.org>
For a brief moment in networkstatus_set_current_consensus(), the old
consensus has been freed, but the node_t objects still have dead
pointers to the routerstatus_t objects within it. During that
interval, we absolutely must not do anything that would cause Tor to
look at those dangling pointers.
Unfortunately, calling the (badly labeled!) current_consensus macro
or anything else that calls into we_use_microdescriptors_for_circuits(),
can make us look at the nodelist.
The fix is to make sure we identify the main consensus flavor
_outside_ the danger zone, and to make the danger zone much much
smaller.
Fixes bug 20103. This bug has been implicitly present for AGES; we
just got lucky for a very long time. It became a crash bug in
0.2.8.2-alpha when we merged 35bbf2e4a4 to make
find_dl_schedule start looking at the consensus, and 4460feaf28
which made node_get_all_orports less (accidentally) tolerant of
nodes with a valid ri pointer but dangling rs pointer.
Previously, the IV and key were stored in the structure, even though
they mostly weren't needed. The only purpose they had was to
support a seldom-used API where you could pass NULL when creating
a cipher in order to get a random key/IV, and then pull that key/IV
back out.
This saves 32 bytes per AES instance, and makes it easier to support
different key lengths.
* Check consistency between the two single onion torrc options
* Use the more relevant option each time we check for single onion mode
* Clarify log messages
* Clarify comments
* Otherwise, no behaviour change
Tor checks that the flag matches the configured onion service anonymity.
Tor refuses to create unflagged onion service using ADD_ONION, if they
would be non-anonymous. The error is:
512 Tor is in non-anonymous onion mode
Similarly, if the NonAnonymous flag is present, and Tor has the default
anonymous onion config:
512 Tor is in anonymous onion mode
Parse the value to UseEntryNodes_option, then set UseEntryNodes before
validating options.
This way, Authorities, Tor2web, and Single Onion Services don't write
spurious "UseEntryNodes 0" lines to their configs. Document the fact that
these tor configurations ignore UseEntryNodes in the manual page.
Also reorder options validation so we modify UseEntryNodes first, then
check its value against EntryNodes.
And silence a warning about disabled UseEntryNodes for hidden services
when we're actually in non-anonymous single onion service mode.
We log this message every time we validate tor's options.
There's no need to log a duplicate in main() as well.
(It is impossible to run main() without validating our options.)
The changes in #19973 fixed ReachableAddresses being applied
too broadly, but they also broke Tor2web (somewhat unintentional)
compatibility with ReachableAddresses.
This patch restores that functionality, which makes intro and
rend point selection is consistent between Tor2web and Single Onion
Services.
Add experimental OnionServiceSingleHopMode and
OnionServiceNonAnonymousMode options. When both are set to 1, every
hidden service on a tor instance becomes a non-anonymous Single Onion
Service. Single Onions make one-hop (direct) connections to their
introduction and renzedvous points. One-hop circuits make Single Onion
servers easily locatable, but clients remain location-anonymous.
This is compatible with the existing hidden service implementation, and
works on the current tor network without any changes to older relays or
clients.
Implements proposal #260, completes ticket #17178. Patch by teor & asn.
squash! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! Implement Prop #260: Single Onion Services
Redesign single onion service poisoning.
When in OnionServiceSingleHopMode, each hidden service key is poisoned
(marked as non-anonymous) on creation by creating a poison file in the
hidden service directory.
Existing keys are considered non-anonymous if this file exists, and
anonymous if it does not.
Tor refuses to launch in OnionServiceSingleHopMode if any existing keys
are anonymous. Similarly, it refuses to launch in anonymous client mode
if any existing keys are non-anonymous.
Rewrite the unit tests to match and be more comprehensive.
Adds a bonus unit test for rend_service_load_all_keys().
(We check consensus method when deciding whether to assume a node is
valid. No need to check the consensus method for Running, since
we will never see a method before 13.)
Closes ticket 20001
g
The other test vectors are pretty complete, and get full coverage, I
believe.
This one test vector accounted for half the time spent in
test-slow. "Now that's slow!"
We have a mock for our RSA key generation function, so we now wire
it to pk_generate(). This covers all the cases that were not using
pk_generate() before -- all ~93 of them.
Previously, you needed to store the previous log severity in a local
variable, and it wasn't clear if you were allowed to call these
functions more than once.
