Now that we don't have version 2, it gives us:
[warn] HiddenServiceVersion must be between 3 and 3, not 2.
This commit changes it to:
[warn] HiddenServiceVersion must be 3, not 2.
Part of #40476
Signed-off-by: David Goulet <dgoulet@torproject.org>
Relay do not accept both stores and lookups of version 2 descriptor.
This effectively disable version 2 HSDir supports for relays.
Part of #40476
Signed-off-by: David Goulet <dgoulet@torproject.org>
Upon receiving a v2 introduction request, the relay will close the
circuit and send back a tor protocol error.
Part of #40476
Signed-off-by: David Goulet <dgoulet@torproject.org>
The minimum service version is raised from 2 to 3 which effectively
disable loading or creating an onion service v2.
As for ADD_ONION, for version 2, a 551 error is returned:
"551 Failed to add Onion Service"
Part of #40476
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a directory request fails, we flag the relay as non Running so we
don't use it anymore.
This can be problematic with onion services because there are cases
where a tor instance could have a lot of services, ephemeral ones, and
keeps failing to upload descriptors, let say due to a bad network, and
thus flag a lot of nodes as non Running which then in turn can not be
used for circuit building.
This commit makes it that we never flag nodes as non Running on a onion
service directory request (upload or fetch) failure as to keep the
hashring intact and not affect other parts of tor.
Fortunately, the onion service hashring is _not_ selected by looking at
the Running flag but since we do a 3-hop circuit to the HSDir, other
services on the same instance can influence each other by removing nodes
from the consensus for path selection.
This was made apparent with a small network that ran out of nodes to
used due to rapid succession of onion services uploading and failing.
See #40434 for details.
Fixes#40434
Signed-off-by: David Goulet <dgoulet@torproject.org>
Without this message getting logged at 'WARN', it's hard to
contextualize the messages we get about compression bombs, so this
message should fix#40175.
I'm rate-limiting this, however, since it _could_ get spammy if
somebody on the network starts acting up. (Right now it should be
very quiet; I've asked Sebastian to check it, and he says that he
doesn't hit this message in practice.)
Closes#40175.
Cached_dir_t is a somewhat "legacy" kind of storage when used for
consensus documents, and it appears that there are cases when
changing our settings causes us to stop updating those entries.
This can cause trouble, as @arma found out in #40375, where he
changed his settings around, and consensus diff application got
messed up: consensus diffs were being _requested_ based on the
latest consensus, but were being (incorrectly) applied to a
consensus that was no longer the latest one.
This patch is a minimal fix for backporting purposes: it has Tor do
the same search when applying consensus diffs as we use to request
them. This should be sufficient for correct behavior.
There's a similar case in GETINFO handling; I've fixed that too.
Fixes#40375; bugfix on 0.3.1.1-alpha.
Turns out that passing client authorization keys to ADD_ONION for v3 was
not working because we were not setting the "is_client_auth_enabled"
flag to true once the clients were configured. This lead to the
descriptor being encoded without the clients.
This patch removes that flag and instead adds an inline function that
can be used to check if a given service has client authorization
enabled.
This will be much less error prone of needing to keep in sync the client
list and a flag instead.
Fixes#40378
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is related to ticket #40360 which found this problem when a Bridge entry
with a transport name (let say obfs4) is set without a fingerprint:
Bridge obfs4 <IP>:<PORT> cert=<...> iat-mode=0
(Notice, no fingerprint between PORT and "cert=")
Problem: commit 09c6d03246 added a check in
get_sampled_guard_for_bridge() that would return NULL if the selected bridge
did not have a valid transport name (that is the Bridge transport name that
corresponds to a ClientTransportPlugin).
Unfortuantely, this function is also used when selecting our eligible guards
which is done *before* the transport list is populated and so the added check
for the bridge<->transport name is querying an empty list of transports
resulting in always returning NULL.
For completion, the logic is: Pick eligible guards (use bridge(s) if need be)
then for those, initiate a connection to the pluggable transport proxy and
then populate the transport list once we've connected.
Back to get_sampled_guard_for_bridge(). As said earlier, it is used when
selecting our eligible guards in a way that prevents us from selecting
duplicates. In other words, if that function returns non-NULL, the selection
continues considering the bridge was sampled before. But if it returns NULL,
the relay is added to the eligible list.
This bug made it that our eligible guard list was populated with the *same*
bridge 3 times like so (remember no fingerprint):
[info] entry_guards_update_primary(): Primary entry guards have changed. New primary guard list is:
[info] entry_guards_update_primary(): 1/3: [bridge] ($0000000000000000000000000000000000000000)
[info] entry_guards_update_primary(): 2/3: [bridge] ($0000000000000000000000000000000000000000)
[info] entry_guards_update_primary(): 3/3: [bridge] ($0000000000000000000000000000000000000000)
When tor starts, it will find the bridge fingerprint by connecting to it and
will then update the primary guard list by calling
entry_guard_learned_bridge_identity() which then goes and update only 1 single
entry resulting in this list:
[debug] sampled_guards_update_consensus_presence(): Sampled guard [bridge] ($<FINGERPRINT>) is still listed.
[debug] sampled_guards_update_consensus_presence(): Sampled guard [bridge] ($0000000000000000000000000000000000000000) is still listed.
[debug] sampled_guards_update_consensus_presence(): Sampled guard [bridge] ($0000000000000000000000000000000000000000) is still listed.
And here lies the problem, now tor is stuck attempting to wait for a valid
descriptor for at least 2 guards where the second one is a bunch of zeroes and
thus tor will never fully bootstraps:
[info] I learned some more directory information, but not enough to build a
circuit: We're missing descriptors for 1/2 of our primary entry guards
(total microdescriptors: 6671/6703). That's ok. We will try to fetch missing
descriptors soon.
Now, why passing the fingerprint then works? This is because the list of
guards contains 3 times the same bridge but they all have a fingerprint and so
the descriptor can be found and tor can bootstraps.
The solution here is to entirely remove the transport name check in
get_sampled_guard_for_bridge() since the transport_list is empty at that
point. That way, the eligible guard list only gets 1 entry, the bridge, and
can then go on to bootstrap properly.
It is OK to do so since when launching a bridge descriptor fetch, we validate
that the bridge transport name is OK and thus avoid connecting to a bridge
without a ClientTransportPlugin. If we wanted to keep the check in place, we
would need to populate the transport_list much earlier and this would require
a much bigger refactoring.
Fixes#40360
Signed-off-by: David Goulet <dgoulet@torproject.org>
We use it in router.c, where chunks are joined with "", not with
NL... so leaving off the terminating NL will lead to an unparseable
extrainfo.
Found by toralf. Bug not in any released Tor.
```
src/feature/stats/rephist.c: In function ‘overload_happened_recently’:
src/feature/stats/rephist.c:215:21: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (overload_time > approx_time() - 3600 * n_hours) {
```
from https://gitlab.torproject.org/tpo/core/tor/-/issues/40341#note_2729364
- Implement overload statistics structure.
- Implement function that keeps track of overload statistics.
- Implement function that writes overload statistics to descriptor.
- Unittest for the whole logic.
We were looking for the first instance of "directory-signature "
when instead the correct behavior is to look for the first instance
of "directory-signature " at the start of a line.
Unfortunately, this can be exploited as to crash authorities while
they're voting.
Fixes#40316; bugfix on 0.2.2.4-alpha. This is TROVE-2021-002,
also tracked as CVE-2021-28090.
