There's no reason to keep a time_t and a struct timeval to represent
the same value: highres_created.tv_sec was the same as timestamp_created.
This should save a few bytes per circuit.
The short version is, "where we want to do it, we have nothing real to
chose from and we can't do it easily. Where it's easy to do, we have
no reason to do it yet."
Our old code correctly called bufferevent_flush() on linked
connections to make sure that the other side got an EOF event... but
it didn't call bufferevent_flush() when the connection wasn't
hold_open_until_flushed. Directory connections don't use
hold_open_until_flushed, so the linked exit connection never got an
EOF, so they never sent a RELAY_END cell to the client, and the
client never concluded that data had arrived.
The solution is to make the bufferevent_flush() code apply to _all_
closing linked conns whose partner is not already marked for close.
https://trac.torproject.org/projects/tor/ticket/1859
There are two problems in this bug:
1. When an OP makes a .exit request specifying itself as the exit, and the exit
is not yet listed, Tor gets all the routerinfos needed for the circuit but
discovers in circuit_is_acceptable() that its own routerinfo is not in the
routerdigest list and cannot be used. Tor then gets locked in a cycle of
repeating these two steps. When gathering the routerinfos for a circuit,
specifically when the exit has been chosen by .exit notation, Tor needs to
apply the same rules it uses later on when deciding if it can build a
circuit with those routerinfos.
2. A different bug arises in the above situation when the Tor instance's
routerinfo *is* listed in the routerlist, it shares its nickname with a
number of other Tor nodes, and it does not have 'Named' rights to its
nickname.
So for example, if (i) there are five nodes named Bob in the network, (ii) I
am running one of them but am flagged as 'Unnamed' because someone else
claimed the 'Bob' nickname first, and (iii) I run my Tor as both client
and exit the following can happen to me:
- I go to www.evil.com
- I click on a link www.evil.com.bob.exit
- My request will exit through my own Tor node rather than the 'Named'
node Bob or any of the others.
- www.evil.com now knows I am actually browsing from the same computer
that is running my 'Bob' node
So to solve both issues we need to ensure:
- When fulfilling a .exit request we only choose a routerinfo if it exists in
the routerlist, even when that routerinfo is ours.
- When getting a router by nickname we only return our own router information
if it is not going to be used for building a circuit.
We ensure this by removing the special treatment afforded our own router in
router_get_by_nickname(). This means the function will only return the
routerinfo of our own router if it is in the routerlist built from authority
info and has a unique nickname or is bound to a non-unique nickname.
There are some uses of router_get_by_nickname() where we are looking for the
router by name because of a configuration directive, specifically local
declaration of NodeFamilies and EntryNodes and other routers' declaration of
MyFamily. In these cases it is not at first clear if we need to continue
returning our own routerinfo even if our router is not listed and/or has a
non-unique nickname with the Unnamed flag.
The patch treats each of these cases as follows:
Other Routers' Declaration of MyFamily
This happens in routerlist_add_family(). If another router declares our router
in its family and our router has the Unnamed flag or is not in the routerlist
yet, should we take advantage of the fact that we know our own routerinfo to
add us in anyway? This patch says 'no, treat our own router just like any
other'. This is a safe choice because it ensures our client has the same view
of the network as other clients. We also have no good way of knowing if our
router is Named or not independently of the authorities, so we have to rely on
them in this.
Local declaration of NodeFamilies
Again, we have no way of knowing if the declaration 'NodeFamilies
Bob,Alice,Ringo' refers to our router Bob or the Named router Bob, so we have
to defer to the authorities and treat our own router like any other.
Local declaration of NodeFamilies
Again, same as above. There's also no good reason we would want our client to
choose it's own router as an entry guard if it does not meet the requirements
expected of any other router on the network.
In order to reduce the possibility of error, the patch also replaces two
instances where we were using router_get_by_nickname() with calls to
router_get_by_hexdigest() where the identity digest of the router
is available.
First start of a fix for bug2001, but my test network still isn't
working: the client and the server send each other VERSIONS cells,
but never notice that they got them.
Currently the unit tests test_util_spawn_background_* assume that they
are run from the Tor build directory. This is not the case when running
make distcheck, so the test will fail. This problem is fixed by autoconf
setting BUILDDIR to be the root of the Tor build directory, and this
preprocessor variable being used to specify the absolute path to
test-child. Also, in test-child, do not print out argv[0] because this will
no longer be predictable. Found by Sebastian Hahn.
* Make tor_tls_context_new internal to tortls.c, and return the new
tor_tls_context_t from it.
* Add a public tor_tls_context_init wrapper function to replace it.
- Responsibility of clearing hex_errno is no longer with caller
- More conservative bounds checking
- Length requirement of hex_errno documented
- Output format documented
Some of these functions only work for routerinfo-based nodes, and as
such are only usable for advisory purposes. Fortunately, our uses
of them are compatible with this limitation.
Also, make the NodeFamily option into a list of routersets. This
lets us git rid of router_in_nickname_list (or whatever it was
called) without porting it to work with nodes, and also lets people
specify country codes and IP ranges in NodeFamily
This was the only flag in routerstatus_t that we would previously
change in a routerstatus_t in a consensus. We no longer have reason
to do so -- and probably never did -- as you can now confirm more
easily than you could have done by grepping for is_running before
this patch.
The name change is to emphasize that the routerstatus_t is_running
flag is only there to tell you whether the consensus says it's
running, not whether it *you* think it's running.
A node_t is an abstraction over routerstatus_t, routerinfo_t, and
microdesc_t. It should try to present a consistent interface to all
of them. There should be a node_t for a server whenever there is
* A routerinfo_t for it in the routerlist
* A routerstatus_t in the current_consensus.
(note that a microdesc_t alone isn't enough to make a node_t exist,
since microdescriptors aren't usable on their own.)
There are three ways to get a node_t right now: looking it up by ID,
looking it up by nickname, and iterating over the whole list of
microdescriptors.
All (or nearly all) functions that are supposed to return "a router"
-- especially those used in building connections and circuits --
should return a node_t, not a routerinfo_t or a routerstatus_t.
A node_t should hold all the *mutable* flags about a node. This
patch moves the is_foo flags from routerinfo_t into node_t. The
flags in routerstatus_t remain, but they get set from the consensus
and should not change.
Some other highlights of this patch are:
* Looking up routerinfo and routerstatus by nickname is now
unified and based on the "look up a node by nickname" function.
This tries to look only at the values from current consensus,
and not get confused by the routerinfo_t->is_named flag, which
could get set for other weird reasons. This changes the
behavior of how authorities (when acting as clients) deal with
nodes that have been listed by nickname.
* I tried not to artificially increase the size of the diff here
by moving functions around. As a result, some functions that
now operate on nodes are now in the wrong file -- they should
get moved to nodelist.c once this refactoring settles down.
This moving should happen as part of a patch that moves
functions AND NOTHING ELSE.
* Some old code is now left around inside #if 0/1 blocks, and
should get removed once I've verified that I don't want it
sitting around to see how we used to do things.
There are still some unimplemented functions: these are flagged
with "UNIMPLEMENTED_NODELIST()." I'll work on filling in the
implementation here, piece by piece.
I wish this patch could have been smaller, but there did not seem to
be any piece of it that was independent from the rest. Moving flags
forces many functions that once returned routerinfo_t * to return
node_t *, which forces their friends to change, and so on.
The node_t type is meant to serve two key functions:
1) Abstracting difference between routerinfo_t and microdesc_t
so that clients can use microdesc_t instead of routerinfo_t.
2) Being a central place to hold mutable state about nodes
formerly held in routerstatus_t and routerinfo_t.
This patch implements a nodelist type that holds a node for every
router that we would consider using.
* MINIUPNPC rather than the generic UPNP
* Nick suggested a better abstraction model for tor-fw-helper
* Fix autoconf to build with either natpmp or miniupnpc
* Add AM_PROG_CC_C_O to fix automake complaint
* update spec to address nickm's concern
* refactor nat-pmp to match upnp state
* we prefer tor_snprintf to snprintf
* link properlty for tor_snprintf
* rename test_commandline_options to log_commandline_options
* cast this uint as an int
* detect possible FD_SETSIZE errors
* make note about future enhancements for natpmp
* add upnp enhancement note
* ChangeLog entry
* doxygen and check-spaces cleanup
* create tor-fw-helper.1.txt
tor-fw-helper is a command-line tool to wrap and abstract various
firewall port-forwarding tools.
This commit matches the state of Jacob's tor-fw-helper branch as of
23 September 2010.
(commit msg by Nick)
When picking bridges (or other nodes without a consensus entry (and
thus no bandwidth weights)) we shouldn't just trust the node's
descriptor. So far we believed anything between 0 and 10MB/s, where 0
would mean that a node doesn't get any use from use unless it is our
only one, and 10MB/s would be a quite siginficant weight. To make this
situation better, we now believe weights in the range from 20kB/s to
100kB/s. This should allow new bridges to get use more quickly, and
means that it will be harder for bridges to see almost all our traffic.
In the first 100 circuits, our timeout_ms and close_ms
are the same. So we shouldn't transition circuits to purpose
CIRCUIT_PURPOSE_C_MEASURE_TIMEOUT, since they will just timeout again
next time we check.
