On win64, sockets are of type UINT_PTR; on win32 they're u_int;
elsewhere they're int. The correct windows way to check a socket for
being set is to compare it with INVALID_SOCKET; elsewhere you see if
it is negative.
On Libevent 2, all callbacks take sockets as evutil_socket_t; we've
been passing them int.
This patch should fix compilation and correctness when built for
64-bit windows. Fixes bug 3270.
We used to regenerate our descriptor whenever we'd get a sighup. This
was caused by a bug in options_transition_affects_workers() that would
return true even if the options were exactly the same. Down the call
path we'd call init_keys(), which made us make a new descriptor which
the authorities would reject, and the node would subsequently fall out
of the consensus.
This patch fixes only the first part of this bug:
options_transition_affects_workers() behaves correctly now. The second
part still wants a fix.
When we configure a new bridge via the controller, don't wait up to ten
seconds before trying to fetch its descriptor. This wasn't so bad when
you listed your bridges in torrc, but it's dreadful if you configure
your bridges via vidalia.
Bumped the char maximum to 512 for HTTPProxyAuthenticator &
HTTPSProxyAuthenticator. Now stripping all '\n' after base64
encoding in alloc_http_authenticator.
Fixed a trivial conflict where this and the ControlSocketGroupWritable
code both added different functions to the same part of connection.c.
Conflicts:
src/or/connection.c
This was harmless, since we only used this for checking for lists of
port values, but it's the principle of the thing.
Fixes 3175; bugfix on 0.1.0.1-rc
This code changes it so that we don't remove bridges immediately when
we start re-parsing our configuration. Instead, we mark them all, and
remove all the marked ones after re-parsing our bridge lines. As we
add a bridge, we see if it's already in the list. If so, we just
unmark it.
This new behavior will lose the property we used to have that bridges
were in bridge_list in the same order in which they appeared in the
torrc. I took a quick look through the code, and I'm pretty sure we
didn't actually depend on that anywhere.
This is for bug 3019; it's a fix on 0.2.0.3-alpha.
Previously, if they changed in torrc during a SIGHUP, all was well,
since we would just clear all transient entries from the addrmap
thanks to bug 1345. But if you changed them from the controller, Tor
would leave old mappings in place.
The VirtualAddrNetwork bug has been here since 0.1.1.19-rc; the
AutomapHosts* bug has been here since 0.2.0.1-alpha.
This bug couldn't happen when TrackExitHosts changed in torrc, since
the SIGHUP to reload the torrc would clear out all the transient
addressmap entries before. But if you used SETCONF to change
TrackExitHosts, old entries would be left alone: that's a bug, and so
this is a bugfix on Tor 0.1.0.1-rc.
If you really want to purge the client DNS cache, the TrackHostExits
mappings, and the virtual address mappings, you should be using NEWNYM
instead.
Fixes bug 1345; bugfix on Tor 0.1.0.1-rc.
Note that this needs more work: now that we aren't nuking the
transient addressmap entries on HUP, we need to make sure that
configuration changes to VirtualAddressMap and TrackHostExits actually
have a reasonable effect.
On IRC, wanoskarnet notes that if we ever do microdesc_free() on a
microdesc that's in the nodelist, we're in trouble. Also, we're in
trouble if we free one that's still in the microdesc_cache map.
This code adds a flag to microdesc_t to note where the microdesc is
referenced from, and checks those flags from microdesc_free(). I
don't believe we have any errors here now, but if we introduce some
later, let's log and recover from them rather than introducing
heisenbugs later on.
Addresses bug 3153.
The old behavior contributed to unreliability when hidden services and
hsdirs had different consensus versions, and so had different opinions
about who should be cacheing hsdir info.
Bugfix on 0.2.0.10-alpha; based on discussions surrounding bug 2732.
The new behavior is to try to rename the old file if there is one there
that we can't read. In all likelihood, that will fail too, but at least
we tried, and at least it won't crash.
Conflicts in various places, mainly node-related. Resolved them in
favor of HEAD, with copying of tor_mem* operations from bug3122_memcmp_022.
src/common/Makefile.am
src/or/circuitlist.c
src/or/connection_edge.c
src/or/directory.c
src/or/microdesc.c
src/or/networkstatus.c
src/or/router.c
src/or/routerlist.c
src/test/test_util.c
Conflicts throughout. All resolved in favor of taking HEAD and
adding tor_mem* or fast_mem* ops as appropriate.
src/common/Makefile.am
src/or/circuitbuild.c
src/or/directory.c
src/or/dirserv.c
src/or/dirvote.c
src/or/networkstatus.c
src/or/rendclient.c
src/or/rendservice.c
src/or/router.c
src/or/routerlist.c
src/or/routerparse.c
src/or/test.c
When configure tor with --enable-bufferevents and
--enable-static-libevent, libevent_openssl would still be linked
dynamically. Fix this and refactor src/or/Makefile.am along the way.
To turn this on, set UseMicrodescriptors to "1" (or "auto" if you
want it on-if-you're-a-client). It should go auto-by-default once
0.2.3.1-alpha is released.
Because of our node logic, directory caches will never use
microdescriptors when they have the right routerinfo available.
See bug 2850 for rationale: it appears that on some busy exits, the OS
decides that every single port is now unusable because they have been
all used too recently.
Previously we ensured that it would get called periodically by doing
it from inside the code that added microdescriptors. That won't work
though: it would interfere with our code that tried to read microdescs
from disk initially. Instead, we should consider rebuilding the cache
periodically, and on startup.
Clients and relays haven't used them since early 0.2.0.x. The only
remaining use by authorities learning about new relays ahead of scedule;
see proposal 147 for what we intend to do about that.
We're leaving in an option (FetchV2Networkstatus) to manually fetch v2
networkstatuses, because apparently dnsel and maybe bwauth want them.
This fixes bug 3022.
A v0 HS authority stores v0 HS descriptors in the same descriptor
cache that its HS client functionality uses. Thus, if the HS
authority operator clears its client HS descriptor cache, ALL v0
HS descriptors will be lost. That would be bad.
These functions can return NULL for otherwise-valid values of
time_t. Notably, the glibc gmtime manpage says it can return NULL
if the year if greater than INT_MAX, and the windows MSDN gmtime
page says it can return NULL for negative time_t values.
Also, our formatting code is not guaranteed to correctly handle
years after 9999 CE.
This patch tries to correct this by detecting NULL values from
gmtime/localtime_r, and trying to clip them to a reasonable end of
the scale. If they are in the middle of the scale, we call it a
downright error.
Arguably, it's a bug to get out-of-bounds dates like this to begin
with. But we've had bugs of this kind in the past, and warning when
we see a bug is much kinder than doing a NULL-pointer dereference.
Boboper found this one too.
Previously, it would remove every trackhostexits-derived mapping
*from* xyz.<exitname>.exit; it was supposed to remove every
trackhostexits-derived mapping *to* xyz.<exitname>.exit.
Bugfix on 0.2.0.20-rc: fixes an XXX020 added while staring at bug-1090
issues.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
This once maybe made sense when ExitNodes meant "Here are 3 exits;
use them all", but now it more typically means "Here are 3
countries; exit from there." Using non-Fast/Stable exits created a
potential partitioning opportunity and an annoying stability
problem.
(Don't worry about the case where all of our ExitNodes are non-Fast
or non-Stable: we handle that later in the function by retrying with
need_capacity and need_uptime set to 0.)
The last entry of the *Maxima values in the state file was inflated by a
factor of NUM_SECS_ROLLING_MEASURE (currently 10). This could lead to
a wrong maximum value propagating through the state file history.
When reading the bw history from the state file, we'd add the 900-second
value as traffic that occured during one second. Fix that by adding the
average value to each second.
This bug was present since 0.2.0.5-alpha, but was hidden until
0.2.23-alpha when we started using the saved values.
Some tor relays would report lines like these in their extrainfo
documents:
dirreq-write-history 2011-03-14 16:46:44 (900 s)
This was confusing to some people who look at the stats. It would happen
whenever a relay first starts up, or when a relay has dirport disabled.
Change this so that lines without actual bw entries are omitted.
Implements ticket 2497.
While doing so, get rid of the now unnecessary function
control_signal_act().
Fixes bug 2917, reported by Robert Ransom. Bugfix on commit
9b4aa8d2ab. This patch is loosely based on
a patch by Robert (Changelog entry).
Instead of answering GETINFO requests about our geoip usage only after
running for 24 hours, this patch makes us answer GETINFO requests
immediately. We still round and quantize as before.
Implements bug2711.
Also, refactor the heck out of the bridge usage formatting code. No
longer should we need to do a generate-parse-and-regenerate cycle to
get the controller string, and that lets us simplify the code a lot.
- Document it in the manpage
- Add a changes entry
- No need to log when it is set: we don't log for other options.
- Use doxygen to document the new flag.
- Test truth of C variables with "if (x)", not "if (x == 1)".
- Simplify a complex boolean expression by breaking it up.
We've got millisecond timers now, we might as well use them.
This change won't actually make circuits get expiered with microsecond
precision, since we only call the expiry functions once per second.
Still, it should avoid the situation where we have a circuit get
expired too early because of rounding.
A couple of the expiry functions now call tor_gettimeofday: this
should be cheap since we're only doing it once per second. If it gets
to be called more often, though, we should onsider having the current
time be an argument again.
Since svn r1475/git 5b6099e8 in tor-0.0.6, we have responded to an
exhaustion of all 65535 stream IDs on a circuit by marking that
circuit for close. That's not the right response. Instead, we
should mark the circuit as "too dirty for new circuits".
Of course in reality this isn't really right either. If somebody
has managed to cram 65535 streams onto a circuit, the circuit is
probably not going to work well for any of those streams, so maybe
we should be limiting the number of streams on an origin circuit
concurrently.
Also, closing the stream in this case is probably the wrong thing to
do as well, but fixing that can also wait.
We fixed bug 539 (where directories would say "503" but send data
anyway) back in 0.2.0.16-alpha/0.1.2.19. Because most directory
versions were affected, we added workaround to make sure that we
examined the contents of 503-replies to make sure there wasn't any
data for them to find. But now that such routers are nonexistent,
we can remove this code. (Even if somebody fired up an 0.1.2.19
directory cache today, it would still be fine to ignore data in its
erroneous 503 replies.)
The first was genuinely impossible, I think: it could only happen
when the amount we read differed from the amount we wanted to read
by more than INT_MAX.
The second is just very unlikely: it would give incorrect results to
the controller if you somehow wrote or read more than 4GB on one
edge conn in one second. That one is a bugfix on 0.1.2.8-beta.
In afe414 (tor-0.1.0.1-rc~173), when we moved to
connection_edge_end_errno(), we used it in handling errors from
connection_connect(). That's not so good, since by the time
connection_connect() returns, the socket is no longer set, and we're
supposed to be looking at the socket_errno return value from
connection_connect() instead. So do what we should've done, and
look at the socket_errno value that we get from connection_connect().
