Longer and more explicit log message so we don't confuse users with behind NAT with working configurations and state that public IP addresses only should be provided with "Address", won't work with internal addresses.
OpenBSD removes this function, and now that Tor requires Libevent 2,
we should also support the OpenBSD Libevent 2.
Fixes bug 19904; bugfix on 0.2.5.4-alpha.
These functions were there so that we could abstract the differences
between evbuffer and buf_t. But with the bufferevent removal, this
no longer serves a purpose.
To maintain precision, to get nanoseconds, we were multiplying our
tick count by a billion, then dividing by ticks-per-second. But
that apparently isn't such a great idea, since ticks-per-second is
sometimes a billion on its own, so our intermediate result was
giving us attoseconds.
When you're counting in attoseconds, you can only fit about 9
seconds into an int64_t, which is not so great for our purposes.
Instead, we now simplify the 1000000000/1000000000 fraction before
we start messing with nanoseconds. This has potential to mess us
up if some future MS version declares that performance counters will
use 1,000,000,007 units per second, but let's burn that bridge when
we come to it.
* Raise limit: 16k isn't all that high.
* Don't log when limit exceded; log later on.
* Say "over" when we log more than we say we log.
* Add target version to changes file
This code uses QueryPerformanceCounter() [**] on Windows,
mach_absolute_time() on OSX, clock_gettime() where available, and
gettimeofday() [*] elsewhere.
Timer types are stored in an opaque OS-specific format; the only
supported operation is to compute the difference between two timers.
[*] As you know, gettimeofday() isn't monotonic, so we include
a simple ratchet function to ensure that it only moves forward.
[**] As you may not know, QueryPerformanceCounter() isn't actually
always as monotonic as you might like it to be, so we ratchet that
one too.
We also include a "coarse monotonic timer" for cases where we don't
actually need high-resolution time. This is GetTickCount{,64}() on
Windows, clock_gettime(CLOCK_MONOTONIC_COARSE) on Linux, and falls
back to regular monotonic time elsewhere.
If we know a node's version, and it can't do ntor, consider it not running.
If we have a node's descriptor, and it doesn't have a valid ntor key,
consider it not running.
Refactor these checks so they're consistent between authorities and clients.
Before, they checked for version 0.2.4.18-rc or later, but this
would not catch relays without version lines, or buggy or malicious
relays missing an ntor key.
If we did not find a non-private IPaddress by iterating over interfaces,
we would try to get one via
get_interface_address6_via_udp_socket_hack(). This opens a datagram
socket with IPPROTO_UDP. Previously all our datagram sockets (via
libevent) used IPPROTO_IP, so we did not have that in the sandboxing
whitelist. Add (SOCK_DGRAM, IPPROTO_UDP) sockets to the sandboxing
whitelist. Fixes bug 19660.
This fixes#19608, allowing IPv6-only clients to use
microdescriptors, while preserving the ability of bridge clients
to have some IPv4 bridges and some IPv6 bridges.
Fix on c281c036 in 0.2.8.2-alpha.
The test was checking for EISDIR which is a Linux-ism making other OSes
unhappy. Instead of checking for a negative specific errno value, just make
sure it's negative indicating an error. We don't need more for this test.
Signed-off-by: David Goulet <dgoulet@torproject.org>
We introduded a shadowed variable, thereby causing a log message to
be wrong. Fixes 19578. I believe the bug was introduced by
54d7d31cba in 0.2.2.29-beta.
I grepped and hand-inspected the "it's" instances, to see if any
were supposed to be possessive. While doing that, I found a
"the the", so I grepped to see if there were any more.
Keep the base16 representation of the RSA identity digest in the commit object
so we can use it without using hex_str() or dynamically encoding it everytime
we need it. It's used extensively in the logs for instance.
Fixes#19561
Signed-off-by: David Goulet <dgoulet@torproject.org>
Encoded commit has an extra byte at the end for the NUL terminated byte and
the test was overrunning the payload buffer by one byte.
Found by Coverity issue 1362984.
Fixes#19567
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch also updates a comment in the same function for accuracy.
Found by Coverity issue 1362985. Partily fixes#19567.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Only some very ancient distributions don't ship with Libevent 2 anymore,
even the oldest supported Ubuntu LTS version has it. This allows us to
get rid of a lot of compat code.
Our sandboxing code would not allow us to write to stats/hidserv-stats,
causing tor to abort while trying to write stats. This was previously
masked by bug#19556.
When sandboxing is enabled, we could not write any stats to disk.
check_or_create_data_subdir("stats"), which prepares the private stats
directory, calls check_private_dir(), which also opens and not just stats() the
directory. Therefore, we need to also allow open() for the stats dir in our
sandboxing setup.
The test_state_update() test would fail if you run it between 23:30 and
00:00UTC in the following line because n_protocol_runs was 2:
tt_u64_op(state->n_protocol_runs, ==, 1);
The problem is that when you launch the test at 23:30UTC (reveal phase),
sr_state_update() gets called from sr_state_init() and it will prepare
the state for the voting round at 00:00UTC (commit phase). Since we
transition from reveal to commit phase, this would trigger a phase
transition and increment the n_protocol_runs counter.
The solution is to initialize the n_protocol_runs to 0 explicitly in the
beginning of the test, as we do for n_reveal_rounds, n_commit_rounds etc.
The *get* state query functions for the SRVs now only return const pointers
and the DEL action needs to be used to delete the SRVs from the state.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch makes us retain the intermediate list of K=V entries for
the duration of computing our vote, and lets us use that list with
a new function in order to look up parameters before the consensus
is published.
We can't actually use this function yet because of #19011: our
existing code to do this doesn't actually work, and we'll need a new
consensus method to start using it.
Closes ticket #19012.
Commit and reveal length macro changed from int to unsigned long int
(size_t) because of the sizeof().
Signed-off-by: David Goulet <dgoulet@torproject.org>
See ticket #19132 for the clang/llvm warning.
Since voting_schedule is a global static struct, it will be initialized
to zero even without explicitly initializing it with {0}.
This is what the C spec says:
If an object that has automatic storage duration is not initialized
explicitly, its value is indeterminate. If an object that has static
storage duration is not initialized explicitly, then:
— if it has pointer type, it is initialized to a null pointer;
— if it has arithmetic type, it is initialized to (positive or unsigned) zero;
— if it is an aggregate, every member is initialized (recursively) according to these rules;
— if it is a union, the first named member is initialized (recursively) according to these rules.
Code has been changed so every RSA fingerprint for a commit in our state is
validated before being used. This fixes the unit tests by mocking one of the
key function and updating the hardcoded state string.
Also, fix a time parsing overflow on platforms with 32bit time_t
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
We assert on it using the ASSERT_COMMIT_VALID() macro in critical places
where we use them expecting a commit to be valid.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The prop250 code used the RSA identity key fingerprint to index commit in a
digestmap instead of using the digest.
To behavior change except the fact that we are actually using digestmap
correctly.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit makes it that tor now uses the shared random protocol by
initializing the subsystem.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
One of the last piece that parses the votes and consensus in order to update
our state and make decision for the SR values.
We need to inform the SR subsystem when we set the current consensus because
this can be called when loaded from file or downloaded from other authorities
or computed.
The voting schedule is used for the SR timings since we are bound to the
voting system.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Signed-off-by: George Kadianakis <desnacked@riseup.net>
This commit adds the commit(s) line in the vote as well as the SR values. It
also has the mechanism to add the majority SRVs in the consensus.
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Signed-off-by: David Goulet <dgoulet@torproject.org>
This adds the logic of commit and SR values generation. Furthermore, the
concept of a protocol run is added that is commit is generated at the right
time as well as SR values which are also rotated before a new protocol run.
Signed-off-by: George Kadianakis <desnacked@riseup.net>
Signed-off-by: David Goulet <dgoulet@torproject.org>
