The warning was:
11:23:10 ../tor/src/feature/hs/hs_service.c: In function 'log_cant_upload_desc':
11:23:10 ../tor/src/feature/hs/hs_service.c:3118:3: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
See #34254 for more info.
I guess this means that gcc assigned an unsigned type to the
`log_desc_upload_reason_t` enum and it warned if we compared it against 0...
For now I think it's simpler to remove that check instead of turning the enum
to a signed type, or trying to hack it some other way.
From what it seems, enum is up to the compiler on whether it's signed/unsigned:
https://stackoverflow.com/questions/159034/are-c-enums-signed-or-unsigned
Use the node check function to check that there are enough nodes to
select a circuit path.
Adds these checks, which are implied by other code:
* supports EXTEND2 cells,
* does not allow single-hop exits,
Adds these extra checks:
* has a general-purpose routerinfo,
* if it is a direct connection, check reachable addresses.
These checks reduce the node count, but they will never under-count
nodes.
Bridge nodes aren't handled correctly, we'll fix that in the next
commit.
Part of 34200.
And check that the correct flags are passed when choosing exits.
Adds the following checks for exits:
* must support EXTEND2 cells,
* must have an ntor circuit crypto key,
* can't require the guard flag,
* can't be a direct connection.
All these checks are already implied by other code.
Part of 34200.
Instead, call out to a helper function, repeating the call if needed.
Avoids duplicating exclusions for:
* the current relay's family, and
* any exclusions specified by the caller.
Part of 34200.
And delete a loop that is now empty. This change should improve tor's
performance, because we no longer iterate through the nodelist twice for
every node in every circuit path.
Part of 34200.
Make Rust protocol version support checks consistent with the
undocumented error behaviour of the corresponding C code.
Fixes bug 34251; bugfix on 0.3.3.5-rc.
Declare support for the onion service introduction point denial of
service extensions, when building tor with Rust.
Fixes bug 34248; bugfix on 0.4.2.1-alpha.
Add tests for relays sending IPv6 extend cells in
circuit_send_next_onion_skin().
Clients also use this code, check that they can only extend over IPv4
(for now).
Part of 33222.
Rewrite inform_testing_reachability() to use separate buffers for IPv4
ORPort, IPv6 ORPort, and IPv4 DirPort. And use consistent APIs to fill
those buffers.
Part of 33222.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
client_or_conn_should_skip_reachable_address_check router_or_conn_should_skip_reachable_address_check \
client_dir_conn_should_skip_reachable_address_check router_dir_conn_should_skip_reachable_address_check
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
router_skip_orport_reachability_check router_should_skip_orport_reachability_check \
router_skip_dirport_reachability_check router_should_skip_dirport_reachability_check \
router_connect_assume_or_reachable client_or_conn_should_skip_reachable_address_check \
router_connect_assume_dir_reachable client_dir_conn_should_skip_reachable_address_check
It was generated with --no-verify, so it probably breaks some commit hooks.
The commiter should be sure to fix them up in a subsequent commit.
GCC added an implicit-fallthrough warning a while back, where it
would complain if you had a nontrivial "case:" block that didn't end
with break, return, or something like that. Clang recently added
the same thing.
GCC, however, would let you annotate a fall-through as intended by
any of various magic "/* fall through */" comments. Clang, however,
only seems to like "__attribute__((fallthrough))". Fortunately, GCC
accepts that too.
A previous commit in this branch defined a FALLTHROUGH macro to do
the right thing if GNUC is defined; here we replace all of our "fall
through" comments with uses of that macro.
This is an automated commit, made with the following perl one-liner:
#!/usr/bin/perl -i -p
s#/\* *falls? ?thr.*?\*/#FALLTHROUGH;#i;
(In order to avoid conflicts, I'm applying this script separately to
each maint branch. This is the 0.4.3 version.)
GCC added an implicit-fallthrough warning a while back, where it
would complain if you had a nontrivial "case:" block that didn't end
with break, return, or something like that. Clang recently added
the same thing.
GCC, however, would let you annotate a fall-through as intended by
any of various magic "/* fall through */" comments. Clang, however,
only seems to like "__attribute__((fallthrough))". Fortunately, GCC
accepts that too.
A previous commit in this branch defined a FALLTHROUGH macro to do
the right thing if GNUC is defined; here we replace all of our "fall
through" comments with uses of that macro.
This is an automated commit, made with the following perl one-liner:
#!/usr/bin/perl -i -p
s#/\* *falls? ?thr.*?\*/#FALLTHROUGH;#i;
(In order to avoid conflicts, I'm applying this script separately to
each maint branch. This is the 0.4.2 version.)
GCC added an implicit-fallthrough warning a while back, where it
would complain if you had a nontrivial "case:" block that didn't end
with break, return, or something like that. Clang recently added
the same thing.
GCC, however, would let you annotate a fall-through as intended by
any of various magic "/* fall through */" comments. Clang, however,
only seems to like "__attribute__((fallthrough))". Fortunately, GCC
accepts that too.
A previous commit in this branch defined a FALLTHROUGH macro to do
the right thing if GNUC is defined; here we replace all of our "fall
through" comments with uses of that macro.
This is an automated commit, made with the following perl one-liner:
#!/usr/bin/perl -i -p
s#/\* *falls? ?thr.*?\*/#FALLTHROUGH;#i;
(In order to avoid conflicts, I'm applying this script separately to
each maint branch. This is the 0.4.1 version.)
GCC added an implicit-fallthrough warning a while back, where it
would complain if you had a nontrivial "case:" block that didn't end
with break, return, or something like that. Clang recently added
the same thing.
GCC, however, would let you annotate a fall-through as intended by
any of various magic "/* fall through */" comments. Clang, however,
only seems to like "__attribute__((fallthrough))". Fortunately, GCC
accepts that too.
A previous commit in this branch defined a FALLTHROUGH macro to do
the right thing if GNUC is defined; here we replace all of our "fall
through" comments with uses of that macro.
This is an automated commit, made with the following perl one-liner:
#!/usr/bin/perl -i -p
s#/\* *falls? ?thr.*?\*/#FALLTHROUGH;#i;
This macro defers to __attribute__((fallthrough)) on GCC (and
clang). Previously we had been using GCC's magic /* fallthrough */
comments, but clang very sensibly doesn't accept those.
Since not all compiler recognize it, we only define it when our
configure script detects that it works.
Part of a fix for 34078.
Move a series of function from config.c into that new file which is related to
address resolving.
Part of #33789
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit moves router_pick_published_address() and the related helper
functions into the new file.
The log_addr_has_changed() function has been made public in router.h so we can
use it in relay_resolve_addr.c.
This is a refactoring as part of Sponsor 55. Only code movement at this
commit.
Part of #33789
Signed-off-by: David Goulet <dgoulet@torproject.org>
Do not try to stuff "HS_DESC_DECODE_GENERIC_ERROR" (-1) into a
socks5_reply_status_t (enum). It doesn't actually make sense, and
isn't one of our documented extensions.
(This can only happen on a nonfatal assertion that we haven't seen,
so it probably isn't happening in practice.)
Fixes another case of bug 34077; bugfix on 0.4.3.1-alpha.
Allow relays and bridges to send IPv4 or IPv6 extend cells.
But keep restricting clients to IPv4 extend cells, because sending IPv6
extend cells would be an obvious version distinguisher.
Part of 33222.
When a relay starts testing reachability, log its IPv6 ORPort.
The existing code logs the IPv4 ORPort and DirPort.
The IPv4 ORPort is required. The other ports are only logged if they
are present.
Part of 33222.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
check_whether_orport_reachable router_skip_orport_reachability_check \
check_whether_dirport_reachable router_skip_dirport_reachability_check
It was generated with --no-verify, so it probably breaks some commit hooks.
The commiter should be sure to fix them up in a subsequent commit.
Part of 33222.
Change some function names to distinguish between:
* client first hop reachability (ReachableAddresses)
* relay port reachability self-tests
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
router_skip_or_reachability router_connect_assume_or_reachable \
router_skip_dir_reachability router_connect_assume_dir_reachable
It was generated with --no-verify, so it probably breaks some commit hooks.
The commiter should be sure to fix them up in a subsequent commit.
Part of 33222.
Split "can extend over IPv6" and "has advertised IPv6 ORPort" into
separate functions. They currently have the same result, but this may
change in 33818 with ExtendAllowIPv6Addresses.
Part of 33817.
Refactor circuit_open_connection_for_extend(), splitting out the IP
address choice code into a new function.
Adds unit tests. No behaviour changes in tor.
Part of 33817.
Some tests use IF_BUG_ONCE(), which is fatal when ALL_BUGS_ARE_FATAL,
after the fixes in 33917.
Also run "make autostyle" on these changes.
Part of 33817.
... and DISABLE_ASSERTS_IN_UNIT_TESTS.
Make all of tor's assertion macros support the ALL_BUGS_ARE_FATAL and
DISABLE_ASSERTS_IN_UNIT_TESTS debugging modes.
Implements these modes for IF_BUG_ONCE(). (It used to log a non-fatal
warning, regardless of the debugging mode.)
Fixes bug 33917; bugfix on 0.2.9.1-alpha.
Allow extend cells with IPv6-only link specifiers.
Warn and fail if both IPv4 and IPv6 are invalid.
Also warn if the IPv4 or IPv6 addresses are unexpectedly internal,
but continue with the valid address.
Part of 33817.
Add fmt_addrport_ap(), a macro that takes a tor_addr_port_t, and uses
it to call fmt_addrport().
Add fmt_addr_family(), a function that returns a string constant
describing the address family.
Utility functions for 33817.
Allow clients and relays to send dual-stack and IPv6-only EXTEND2 cells.
Parse dual-stack and IPv6-only EXTEND2 cells on relays.
Relays do not make connections or extend circuits via IPv6: that's the
next step.
Closes ticket 33901.
Log IPv6 addresses on connections where this relay is the responder.
Previously, responding relays would replace the remote IPv6 address with
the IPv4 address from the consensus.
(The port is replaced with the IPv6 ORPort from the consensus, we will
resolve this issue in 33898.)
Fixes bug 33899; bugfix on 0.3.1.1-alpha.
Consider IPv6 addresses when checking if a connection is canonical.
In 17604, relays assumed that a remote relay could consider an IPv6
connection canonical, but did not set the canonical flag on their side
of the connection.
Fixes bug 33899; bugfix on 0.3.1.1-alpha.
The client auth protocol allows attacker-controlled x25519 private keys being
passed around, which allows an attacker to potentially trigger the all-zeroes
assert for client_auth_sk in hs_descriptor.c:decrypt_descriptor_cookie().
We fixed that by making sure that an all-zeroes client auth key will not be
used.
There are no guidelines for validating x25519 private keys, and the assert was
there as a sanity check for code flow issues (we don't want to enter that
function with an unitialized key if client auth is being used). To avoid such
crashes in the future, we also changed the assert to a BUG-and-err.
This change broke torsocks that by default is expecting an IPv4 for hostname
resolution because it can't ask tor for a specific IP version with the SOCKS5
extension.
PreferIPv6 made it that sometimes the IPv6 could be returned to torsocks that
was expecting an IPv4.
Torsocks is probably a very unique case because the runtime flow is that it
hijacks DNS resolution (ex: getaddrinfo()), gets an IP and then sends it back
for the connect() to happen.
The libc has DNS resolution functions that allows the caller to request a
specific INET family but torsocks can't tell tor to resolve the hostname only
to an IPv4 or IPv6 and thus by default fallsback to IPv4.
Reverting this change into 0.4.3.x series but we'll keep it in the 0.4.4.x
series in the hope that we add this SOCKS5 extension to tor for DNS resolution
and then change torsocks to use that.
Fixes#33804
Signed-off-by: David Goulet <dgoulet@torproject.org>
circuit_extend() may be called when a client receives an extend cell,
even if the relay module is disabled.
Log a protocol warning when the relay module is disabled.
Part of 33633.
This is to allow a visual feedback in the logs for operators setting up Onion
Balance so they can confirm they properly configured the instances.
Signed-off-by: David Goulet <dgoulet@torproject.org>
LOG_PROTOCOL_WARN was in core/or.h, but the function it depends on is in
app/config.h. Put them in the same header, to reduce dependencies.
Part of 33633.
The ob_subcreds array was not copied after SIGHUP, and that left the
post-SIGHUP service with a NULL ob_subcreds pointer (until the next descriptor
gets build where we regenerate ob_subcreds in hs_ob_refresh_keys()).
Fixes bug #33762; not in any released tor version.
This patch doesn't actually use the results of the parsed object to
create the service configuration: subsequent patches will do
that. This patch just introduces the necessary configuration tables
and starts using them to validate the configuration.
As of this writing, this patch breaks tests. I'll likely fix that
in a rebase later on: the current error messages for failures to
parse options are a regression, so I've opened #33640 for that.
If the buf_t's length could potentially become greater than INT_MAX - 1,
it sets off an IF_BUG_ONCE in buf_read_from_tls().
All of the rest of the buffers.c code has similar BUG/asserts for this
invariant.
Return early when there is no suitable IPv6 ORPort.
Show the address and port on error, using a convenience function.
Code simplification and refactoring.
Cleanup after 32588.
When IPv6 ORPorts are set to "auto", tor relays and bridges would
advertise an incorrect port in their descriptor.
This may be a low-severity memory safety issue, because the published
port number may be derived from uninitialised or out-of-bounds memory
reads.
Fixes bug 32588; bugfix on 0.2.3.9-alpha.
Previously we just ignored this option, which would leave it unset,
and cause an assertion failure later on when running with the User
option.
Fixes bug 33668; bugfix on 0.4.3.1-alpha.
For example, "TOR_SKIP_TESTCASES=crypto/.. ./src/test/test" will run
the tests and suppress all the "crypto/" tests. You could get the
same effect by running "./src/test/test :crypto/..", but that can be
harder to arrange from CI.
Part of a fix/workaround for 33643.
Add an inline helper function that indicates if the cached object contains a
decrypted descriptor or not.
The descriptor object is NULL if tor is unable to decrypt it (lacking client
authorization) and some actions need to be done only when we have a decrypted
object.
This improves code semantic.
Fixes#33458
Signed-off-by: David Goulet <dgoulet@torproject.org>
Given that ed25519 public key validity checks are usually not needed
and (so far) they are only necessary for onion addesses in the Tor
protocol, we decided to fix this specific bug instance without
modifying the rest of the codebase (see below for other fix
approaches).
In our minimal fix we check that the pubkey in
hs_service_add_ephemeral() is valid and error out otherwise.
In the openssl that I have, it should be safe to only check the size
of n. But if I'm wrong, or if other openssls work differently, we
should check whether any of the fields are too large.
Issue spotted by Teor.
This function does a nonfatal assertion to make sure that a machine
is not registered twice, but Tobias Pulls found a case where it
happens. Instead, make the function exit early so that it doesn't
cause a remotely triggered memory leak.
Fixes bug 33619; bugfix on 0.4.0.1-alpha. This is also tracked as
TROVE-2020-004.
Although OpenSSL before 1.1.1 is no longer supported, it's possible
that somebody is still using it with 0.3.5, so we probably shouldn't
break it with this fix.
Now port_cfg_new() returns all default flags and
port_parse_config() acts on defaults returned by port_cfg_new()
that is uses the default port_cfg_t object returned by port_cfg_new()
and modifies them later according to the port specifications in
configuration files
Might close tor#32994.
Stop forcing all non-SOCKSPorts to prefer IPv6 exit connections.
Instead, prefer IPv6 connections by default, but allow users to change
their configs using the "NoPreferIPv6" port flag.
Fixes bug 33608; bugfix on 0.4.3.1-alpha.
When a service can not upload its descriptor(s), we have no logs on why. This
adds logging for each possible reason for each descriptors.
That logging is emitted every second so it is rate limited for each reason and
per descriptor.
Closes#33400
Signed-off-by: David Goulet <dgoulet@torproject.org>
For a bridge configured with a pluggable transport, the transport name is
used, with the IP address, for the GeoIP client cache entry.
However, the DoS subsystem was not aware of it and always passing NULL when
doing a lookup into the GeoIP cache.
This resulted in bridges with a PT are never able to apply DoS defenses for
newly created connections.
Fixes#33491
Signed-off-by: David Goulet <dgoulet@torproject.org>
This function works a little bit like strsep(), to get a chunk of
configuration lines with a given header. We can use this to make
hidden service config easier to parse.
In this case, when we're looking for the voting interval, we should
try looking at the _latest_ consensus if we have one. When we're
looking for the start of the current voting period, we can use our
existing fallback logic without complaint, since the voting interval
code will already have given us a reasonable voting interval, and we
want to have a round starting time based on the current time.
This is not as clean a patch as I would like: see the comment on
ASSUME_AUTHORITY_SCHEDULING. This issue here is that the unit tests
sometimes assume that we are going to be looking at the dirauth
options and behaving like a dirauth, but without setting the options
to turn is into one.
This isn't an issue for actually running Tor, as far as I can tell
with chutney.
Most of this function was about recreating a voting schedule on
demand if it didn't exist yet or was not up-to-date. I've made that
into its own function.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
voting_schedule_recalculate_timing dirauth_sched_recalculate_timing \
voting_schedule_get_start_of_next_interval voting_sched_get_start_of_interval_after \
voting_schedule_get_next_valid_after_time dirauth_sched_get_next_valid_after_time
Previously we had initialized only the library subsystems. This
made it hard to write some tests, and encouraged people to put their
subsystems at a level lower than they really belonged at. Instead,
it probably just makes sense to initialize everything before we
start the tests.
Without this fix, 33316 breaks our tests because of raising the
level of the ocirc/orconn events.
This code was in our process module, but it doesn't belong there:
process is for launching and monitoring subprocesses, not for
hardening the current process.
This change lets us have our subsystem init order more closely match
our dependency order.
