1. Implement the following mapping rules:
MapAddress a.b.c d.e.f # This is what we have now
MapAddress .a.b.c d.e.f # Replaces any address ending with .a.b.c with d.e.f
MapAddress .a.b.c .d.e.f # Replaces the .a.b.c at the end of any addr with .d.e.f
(Note that 'a.b.c .d.e.f' is invalid, and will be rejected.)
2. Add tests for the new rules.
3. Allow proper wildcard annotation, i.e. '*.d.e' '.d.e' will still work.
4. Update addressmap_entry_t with an is_wildcard member.
This keeps the IP address and TCP for a given OR port together,
reducing the risk of using an address for one address family with a
port of another.
Make node_get_addr() a wrapper function for compatibility.
This is not as conservative as we could do it, f.ex. by looking at the
connection and only do this for connections to bridges. A non-bridge
should never have anything else than its primary IPv4 address set
though, so I think this is safe.
Don't touch the string representation in routerinfo_t->address.
Also, set or clear the routerinfo_t->ipv6_preferred flag based on the
address family of the bridge.
Comments below focus on changes, see diff for added code.
New type tor_addr_port_t holding an IP address and a TCP/UDP port.
New flag in routerinfo_t, ipv6_preferred. This should go in the
node_t instead but not now.
Replace node_get_addr() with
- node_get_prim_addr() for primary address, i.e. IPv4 for now
- node_get_pref_addr() for preferred address, IPv4 or IPv6.
Rename node_get_addr_ipv4h() node_get_prim_addr_ipv4h() for
consistency. The primary address will not allways be an IPv4 address.
Same for node_get_orport() -> node_get_prim_orport().
Rewrite node_is_a_configured_bridge() to take all OR ports into account.
Extend argument list to extend_info_from_node and
extend_info_from_router with a flag indicating if we want to use the
routers primary address or the preferred address. Use the preferred
address in as few situtations as possible for allowing clients to
connect to bridges over IPv6.
This code handles the new ORPort options, and incidentally makes all
remaining port types use the new port configuration systems.
There are some rough edges! It doesn't do well in the case where your
Address says one thing but you say to Advertise another ORPort. It
doesn't handle AllAddrs. It doesn't actually advertise anything besides
the first listed advertised IPv4 ORPort and DirPort. It doesn't do
port forwarding to them either.
It's not tested either, it needs more documentation, and it probably
forgets to put the milk back in the refrigerator.
Some controllers want this so they can mess with Tor's configuration
for a while via the control port before actually letting Tor out of
the house.
We do this with a new DisableNetwork option, that prevents Tor from
making any outbound connections or binding any non-control
listeners. Additionally, it shuts down the same functionality as
shuts down when we are hibernating, plus the code that launches
directory downloads.
To make sure I didn't miss anything, I added a clause straight to
connection_connect, so that we won't even try to open an outbound
socket when the network is disabled. In my testing, I made this an
assert, but since I probably missed something, I've turned it into a
BUG warning for testing.
This will mainly help distributors by giving a way to set system or package
defaults that a user can override, and that a later package can replace.
No promises about the particular future location or semantics for this:
we will probably want to tweak it some before 0.2.3.x-rc
The file is searched for in CONFDIR/torrc-defaults , which can be
overridden with the "--defaults-torrc" option on the command line.
This starts an effort to refactor torrc handling code to make it easier
to live with. It makes it possible to override exit policies from the
command line, and possible to override (rather than append to) socksport
lists from the command line.
It'll be necessary to make a "base" torrc implementation work at all.
Instead of only writing the dynamic DH prime modulus to a file, write
the whole DH parameters set for forward compatibility. At the moment
we only accept '2' as the group generator.
The DH parameters gets stored in base64-ed DER format to the
'dynamic_dh_params' file.
Let's *not* expose more cross-platform-compatibility structures, or
expect code to use them right.
Also, don't fclose() stdout_handle and stdin_handle until we do
tor_process_handle_destroy, or we risk a double-fclose.
We used to do init_keys() if DynamicDHGroups changed after a HUP, so
that the dynamic DH modulus was stored on the disk. Since we are now
doing dynamic DH modulus storing in crypto.c, we can simply initialize
the TLS context and be good with it.
Introduce a new function router_initialize_tls_context() which
initializes the TLS context and use it appropriately.
The function is over 10 or 20% on some of Moritz's profiles, depending
on how you could.
Since it's checking for a multi-hour timeout, this is safe to do.
Fixes bug 4518.
Completely disable stats if we aren't running as a relay. We won't
collect any anyway, so setting up the infrastructure for them and
logging about them is wrong. This also removes a confusing log
message that clients without a geoip db would have seen.
Fixes bug 4353.
When running with IOCP, we are in theory able to use userspace-
allocated buffers to avoid filling up the stingy amount of kernel
space allocated for sockets buffers.
The bufferevent_async implementation in Libevent provides this
ability, in theory. (There are likely to be remaining bugs). This
patch adds a new option that, when using IOCP bufferevents, sets
each socket's send and receive buffers to 0, so that we should use
this ability.
When all the bugs are worked out here, if we are right about bug 98,
this might solve or mitigate bug 98.
This option is experimental and will likely require lots of testing
and debugging.
Let's make it more obvious to the everyday reader that eventdns.c is
a) Based on Libevent's evdns.c
b) Slated for demolition
c) Supposed to keep API-compatibility with Libevent.
d) Not worth tweaking unless there's a bug.
- Add a LOG_WARN message when registering the transports of a server
managed proxy, so that the bridge operator can see in what ports the
transports spawned and notify his/her clients.
The Right Way to expire an intro point is to establish a new one to
replace it, publish a new descriptor that doesn't list any expiring intro
points, and *then*, once our upload attempts for the new descriptor have
ended (whether in success or failure), close the expiring intro points.
Unfortunately, we can't find out when the new descriptor has actually been
uploaded, so we'll have to settle for a five-minute timer.
There should be no significant behaviour changes due to this commit (only
a log-message change or two), despite the rather massive overhaul, so this
commit doesn't include a changes/ file. (The commit that teaches
intro_point_should_expire_now to return non-zero gets a changes/ file,
though.)
We would stash the certs in the handshake state before checking them
for validity... and then if they turned out to be invalid, we'd give
an error and free them. Then, later, we'd free them again when we
tore down the connection.
Fixes bug 4343; fix on 0.2.3.6-alpha.
This way, all of the DA operators can upgrade immediately, without nuking
every client's set of entry guards as soon as a majority of them upgrade.
Until enough guards have upgraded, a majority of dirauths should set this
config option so that there are still enough guards in the network. After
a few days pass, all dirauths should use the default.
The patch for 3228 made us try to run init_keys() before we had loaded
our state file, resulting in an assert inside init_keys. We had moved
it too early in the function.
Now it's later in the function, but still above the accounting calls.
Previously we did this nearer to the end (in the old_options &&
transition_affects_workers() block). But other stuff cares about
keys being consistent with options... particularly anything which
tries to access a key, which can die in assert_identity_keys_ok().
Fixes bug 3228; bugfix on 0.2.2.18-alpha.
Conflicts:
src/or/config.c
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
Conflicts:
src/or/config.c
We use a hash of the identity key to seed a prng to tell when an
accounting period should end. But thanks to the bug998 changes,
clients no longer have server-identity keys to use as a long-term seed
in accounting calculations. In any case, their identity keys (as used
in TLS) were never never fixed. So we can just set the wakeup time
from a random seed instead there. Still open is whether everybody
should be random.
This patch fixes bug 2235, which was introduced in 0.2.2.18-alpha.
Diagnosed with help from boboper on irc.
In a2bb0bf we started using a separate client identity key. When we are
in "public server mode" (that means not a bridge) we will use the same
key. Reusing the key without doing the proper refcounting leads to a
segfault on cleanup during shutdown. Fix that.
Also introduce an assert that triggers if our refcount falls below 0.
That should never happen.
We now require that:
- Only actual servers should ever call get_server_identity_key
- If you're being a client or bridge, the client and server keys should
differ.
- If you're being a public relay, the client and server keys
should be the same.
* Make tor_tls_context_new internal to tortls.c, and return the new
tor_tls_context_t from it.
* Add a public tor_tls_context_init wrapper function to replace it.
Conflicts:
src/or/main.c
src/or/router.c
Since we check for naughty renegotiations using
tor_tls_t.server_handshake_count we don't need that semi-broken
function (at least till there is a way to disable rfc5746
renegotiations too).
When you're doing malloc(sizeof(int)), something may well have gone
wrong.
This technique is a bit abusive, but we're already relying on it
working correctly in geoip.c.
To get a better idea what's going on on Tonga, add some code to report
how often the most and least frequently fetched descriptor was fetched,
as well as 25, 50, 75 percentile.
Also ensure we only count bridge descriptors here.
- Add a tor_process_get_pid() function that returns the PID of a
process_handle_t.
- Conform to make check-spaces.
- Add some more documentation.
- Improve some log messages.
We used to try to terminate the managed proxy process even if it
failed while launching. We introduce a new managed proxy state, to
represent a *broken* and *not launched* proxy.
This is used for the bridge authority currently, to get a better
intuition on how many descriptors are actually fetched from it and how
many fetches happen in total.
Implements ticket 4200.
Fixes bug 4259, bugfix on 0.2.2.25-alpha. Bugfix by "Tey'".
Original message by submitter:
Changing nodes restrictions using a controller while Tor is doing
DNS resolution could makes Tor crashes (on WinXP at least). The
problem can be repeated by trying to reach a non-existent domain
using Tor:
curl --socks4a 127.0.0.1:9050 inexistantdomain.ext
.. and changing the ExitNodes parameter through the control port
before Tor returns a DNS resolution error (of course, the following
command won't work directly if the control port is password
protected):
echo SETCONF ExitNodes=TinyTurtle | nc -v 127.0.0.1 9051
Using a non-existent domain is needed to repeat the issue so that
Tor takes a few seconds for resolving the domain (which allows us to
change the configuration). Tor will crash while processing the
configuration change.
The bug is located in the addressmap_clear_excluded_trackexithosts
method which iterates over the entries of the addresses map in order
to check whether the changes made to the configuration will impact
those entries. When a DNS resolving is in progress, the new_adress
field of the associated entry will be set to NULL. The method
doesn't expect this field to be NULL, hence the crash.
Previously, we would treat an intro circuit failure as a timeout iff the
circuit failed due to a mismatch in relay identity keys. (Due to a bug
elsewhere, we only recognize relay identity-key mismatches on the first
hop, so this isn't as bad as it could have been.)
Bugfix on commit eaed37d14c, not yet in any
release.
It's too risky to have a function where if you leave one parameter
NULL, it splits up address:port strings, but if you set it, it does
hostname resolution.
Under the new convention, having a tor_addr.*lookup function that
doesn't do hostname resolution is too close for comfort.
I used this script here, and have made no other changes.
s/tor_addr_parse_reverse_lookup_name/tor_addr_parse_PTR_name/g;
s/tor_addr_to_reverse_lookup_name/tor_addr_to_PTR_name/g;
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Right now we can take the digests only of an RSA key, and only expect to
take the digests of an RSA key. The old tor_cert_get_id_digests() would
return a good set of digests for an RSA key, and an all-zero one for a
non-RSA key. This behavior is too error-prone: it carries the risk that
we will someday check two non-RSA keys for equality and conclude that
they must be equal because they both have the same (zero) "digest".
Instead, let's have tor_cert_get_id_digests() return NULL for keys we
can't handle, and make its callers explicitly test for NULL.
Also, define all commands > 128 as variable-length when using
v3 or later link protocol. Running into a var cell with an
unrecognized type is no longer a bug.
Without this patch, Tor wasn't sure whether it would be hibernating or
not, so it postponed opening listeners until after the privs had been
dropped. This doesn't work so well for low ports. Bug was introduced in
the fix for bug 2003. Fixes bug 4217, reported by Zax and katmagic.
Thanks!
One of its callers assumes a non-zero result indicates a permanent failure
(i.e. the current attempt to connect to this HS either has failed or is
doomed). The other caller only requires that this function's result
never equal -2.
Bug reported by Sebastian Hahn.
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
This is the cherry-picked 499661524b.
Previously Tor would always claim to have been given a hostname
by the client, while actually only verifying that the client
is using SOCKS4A or SOCKS5 with hostnames. Both protocol versions
allow IP addresses, too, in which case the log messages were wrong.
Fixes#4094.
Previously, we wouldn't refetch an HS's descriptor unless we didn't
have one at all. That was equivalent to refetching iff we didn't have
a usable one, but the next commit will make us keep some non-usable HS
descriptors around in our cache.
Code bugfix on the release that introduced the v2 HS directory system,
because rend_client_refetch_v2_renddesc's documentation comment should
have described what it actually did, not what its behaviour happened
to be equivalent to; no behaviour change in this commit.
Otherwise, we can wind up munging our reference counts if we set it in
the middle of loading the nodes. This happens because
nodelist_set_consensus() and microdesc_reload_cache() are both in the
business of adjusting microdescriptors' references.
we don't need to check whether we don't have enough guards right after
concluding that we do have enough.
slight efficiency fix suggested by an anonymous fellow on irc.
We were doing "divide bandwidth by 1000, then multiply by msec", but
that would lose accuracy: instead of getting your full bandwidth,
you'd lose up to 999 bytes per sec. (Not a big deal, but every byte
helps.)
Instead, do the multiply first, then the division. This can easily
overflow a 32-bit value, so make sure to do it as a 64-bit operation.
With managed proxies you would always get the error message:
"You have a Bridge line using the X pluggable transport, but there
doesn't seem to be a corresponding ClientTransportPlugin line."
because the check happened directly after parse_client_transport_line()
when managed proxies were not fully configured and their transports
were not registered.
The fix is to move the validation to run_scheduled_events() and make
sure that all managed proxies are configured first.
* Create mark/sweep functions for transports.
* Create a transport_resolve_conflicts() function that tries to
resolve conflicts when registering transports.
Previously the FooPort was ignored and the default used instead,
causing Tor to bind to the wrong port if FooPort and the default
port don't match or the CONN_TYPE_FOO_LISTENER has no default port.
Fixes#3936.
Right now we only force a new descriptor upload every 18 hours.
This can make servers become unlisted if they upload a descriptor at
time T which the authorities reject as being "too similar" to one
they uploaded before. Nothing will actually make the server upload a
new descriptor later on, until another 18 hours have passed.
This patch changes the upload behavior so that the 18 hour interval
applies only when we're listed in a live consensus with a descriptor
published within the last 18 hours. Otherwise--if we're not listed
in the live consensus, or if we're listed with a publication time
over 18 hours in the past--we upload a new descriptor every 90
minutes.
This is an attempted bugfix for #3327. If we merge it, it should
obsolete #535.
Conflicts:
src/or/connection.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/dnsserv.c
Some of these were a little tricky, since they touched code that
changed because of the prop171 fixes.
Add a "default" state which we use until we've decided whether we're
live or hibernating. This allows us to properly track whether we're
resuming a hibernation period or not. Fixes bug 2003.
For printf, %f and %lf are synonymous, since floats are promoted to
doubles when passed as varargs. It's only for scanf that we need to
say "%lf" for doubles and "%f" for floats.
Apparenly, some older compilers think it's naughty to say %lf and like
to spew warnings about it.
Found by grarpamp.
For bufferevents, we had all of connection_buckets_decrement() stubbed
out. But that's not actually right! The rephist_* parts were
essential for, inter alia, recording our own bandwidth. This patch
splits out the rephist parts of connection_buckets_decrement() into their
own function, and makes the bufferevent code call that new function.
Fixes bug 3803, and probably 3824 and 3826 too. Bugfix on 0.2.3.1-alpha.
Previously, if you were set up to use microdescriptors, and you
weren't a cache, you'd never fetch router descriptors (except for
bridges). Now FetchUselessDescriptors causes descriptors and
mirodescs to get cached. Also, FetchUselessDescriptors changes the
behavior of "UseMicrodescriptors auto" to be off, since there's no
point in saying "UseMicrodescriptors 1" when you have full descriptors
too.
Fix for bug 3851; bugfix on 0.2.3.1-alpha.
Because tunneled connections are implemented with buffervent_pair,
writing to them can cause an immediate flush. This means that
added to them and then checking to see whether their outbuf is
empty is _not_ an adequate way to see whether you added anything.
This caused a problem in directory server connections, since they
would try spooling a little more data out, and then close the
connection if there was no queued data to send.
This fix should improve matters; it only closes the connection if
there is no more data to spool, and all of the spooling callbacks
are supposed to put the dirconn into dir_spool_none on completion.
This is bug 3814; Sebastian found it; bugfix on 0.2.3.1-alpha.
When we're doing filtering ssl bufferevents, we want the rate-limits
to apply to the lowest level of the bufferevent stack, so that we're
actually limiting bytes sent on the network. Otherwise, we'll read
from the network aggressively, and only limit stuff as we process it.
This behavior is normal when we want more data than the evbuffer
actually has for us. We'll ask for (say) 7 bytes, get only 5
(because that's all there is), try to parse the 5 bytes, and get
told "no, I want 7". One option would be to bail out early whenever
want_length is > buflen, but sometimes we use an over-large
want_length. So instead, let's just remove the warning here: it's
not a bug after all.
* Use strcmpstart() instead of strcmp(x,y,strlen(y)).
* Warn the user if the managed proxy failed to launch.
* Improve function documentation.
* Use smartlist_len() instead of n_unconfigured_proxies.
* Split managed_proxy_destroy() to managed_proxy_destroy()
and managed_proxy_destroy_with_transports().
* Constification.
It turns out that it wasn't enough to set the configuration to
"auto", since the correct behavior for "auto" had been disabled in
microdesc.c. :p
(Hasn't been in a release yet, so doesn't need a changes entry.)
Now we track *which* stream with ISO_STREAM set is associated to a
particular circuit, so that we won't think that stream is incompatible
with its circuit and launch another one a second later, and we use that
same field to mark circuits which have had an ISO_STREAM stream attached
to them, so that we won't ever put a second stream on that circuit.
Fixes bug 3695.
Only write a bridge-stats string if bridge stats have been
initialized. This behavior is similar to dirreq-stats, entry-stats,
etc.
Also add a few unit tests for the bridge-stats code.
This patch separates the generation of a dirreq-stats string from
actually writing it to disk. The new geoip_format_dirreq_stats()
generates a dirreq-stats string that geoip_dirreq_stats_write() writes
to disk. All the state changing (e.g., resetting the dirreq-stats
history and initializing the next measurement interval) takes place in
geoip_dirreq_stats_write(). That allows us to finally test the
dirreq-stats code better.
Now that formatting the buffer-stats string is separate from writing
it to disk, we can also decouple the logic to extract stats from
circuits and finally write some unit tests for the history code.
The new rep_hist_format_buffer_stats() generates a buffer-stats string
that rep_hist_buffer_stats_write() writes to disk. All the state
changing (e.g., resetting the buffer-stats history and initializing
the next measurement interval) takes place in
rep_hist_buffer_stats_write(). That allows us to finally test the
buffer-stats code better.
So far, if we didn't see a single circuit, we refrained from
generating a cell-stats string and logged a warning. Nobody will
notice the warning, and people will wonder why there's no cell-stats
string in the extra-info descriptor. The better behavior is to
generate a cell-stats string with all zeros.
Right now, we append statistics to files in the stats/ directory for
half of the statistics, whereas we overwrite these files for the other
half. In particular, we append buffer, dirreq, and entry stats and
overwrite exit, connection, and bridge stats.
Appending to files was useful when we didn't include stats in extra-info
descriptors, because otherwise we'd have to copy them away to prevent
Tor from overwriting them.
But now that we include statistics in extra-info descriptors, it makes
no sense to keep the old statistics forever. We should change the
behavior to overwriting instead of appending for all statistics.
Implements #2930.
They *are* non-NUL-terminated, after all (and they have to be, since
the SOCKS5 spec allows them to contain embedded NULs. But the code
to implement proposal 171 was copying them with tor_strdup and
comparing them with strcmp_opt.
Fix for bug on 3683; bug not present in any yet-released version.
Previously we'd just looked at the connection type, but that's
always CONN_TYPE_AP. Instead, we should be looking at the type of
the listener that created the connection.
Spotted by rransom; fixes bug 3636.
We'll still need to tweak it so that it looks for includes and
libraries somewhere more sensible than "where we happened to find
them on Erinn's system"; so that tests and tools get built too;
so that it's a bit documented; and so that we actually try running
the output.
Work done with Erinn Clark.
The conflicts are with the proposal 171 circuit isolation code, and
they're all trivial: they're just a matter of both branches adding
some unrelated code in the same places.
Conflicts:
src/or/circuituse.c
src/or/connection.c
The problem was that we weren't initializing want_length to 0 before
calling parse_socks() the first time, so it looked like we were
risking an infinite loop when in fact we were safe.
Fixes 3615; bugfix on 0.2.3.2-alpha.
Back when I added this logic in 20c0581a79, the rule was that whenever
a circuit finished building, we cleared its isolation info. I did that
so that we would still use the circuit even if all the streams that
had previously led us to tentatively set its isolation info had closed.
But there were problems with that approach: We could pretty easily get
into a case where S1 had led us to launch C1 and S2 had led us to
launch C2, but when C1 finished, we cleared its isolation and attached
S2 first. Since C2 was still marked in a way that made S1
unattachable to it, we'd then launch another circuit needlessly.
So instead, we try the following approach now: when a circuit is done
building, we try to attach streams to it. If it remains unused after
we try attaching streams, then we clear its isolation info, and try
again to attach streams.
Thanks to Sebastian for helping me figure this out.
One-hop dirconn streams all share a session group, and get the
ISO_SESSIONGRP flag: they may share circuits with each other and
nothing else.
Anonymized dirconn streams get a new internal-use-only ISO_STREAM
flag: they may not share circuits with anything, including each other.
The new candidate rule, which arma suggested and I like, is that
the original address as received from the client connection or as
rewritten by the controller is the address that counts.
This is mainly meant as a way to keep clients from accidentally
DOSing themselves by (e.g.) enabling IsolateDestAddr or
IsolateDestPort on a port that they use for HTTP.
Our old "do we need to launch a circuit for stream S" logic was,
more or less, that if we had a pending circuit that could handle S,
we didn't need to launch a new one.
But now that we have streams isolated from one another, we need
something stronger here: It's possible that some pending C can
handle either S1 or S2, but not both.
This patch reuses the existing isolation logic for a simple
solution: when we decide during circuit launching that some pending
C would satisfy stream S1, we "hypothetically" mark C as though S1
had been connected to it. Now if S2 is incompatible with S1, it
won't be something that can attach to C, and so we'll launch a new
stream.
When the circuit becomes OPEN for the first time (with no streams
attached to it), we reset the circuit's isolation status. I'm not
too sure about this part: I wanted some way to be sure that, if all
streams that would have used a circuit die before the circuit is
done, the circuit can still get used. But I worry that this
approach could also lead to us launching too many circuits. Careful
thought needed here.
This is the meat of proposal 171: we change circuit_is_acceptable()
to require that the connection is compatible with every connection
that has been linked to the circuit; we update circuit_is_better to
prefer attaching streams to circuits in the way that decreases the
circuits' usefulness the least; and we update link_apconn_to_circ()
to do the appropriate bookkeeping.
The "nym epoch" of a stream is defined as the number of times that
NEWNYM had been called before the stream was opened. All streams
are isolated by nym epoch.
This feature should be redundant with existing signewnym stuff, but
it provides a good belt-and-suspenders way for us to avoid ever
letting any circuit type bypass signewnym.
This patch adds fields to track how streams should be isolated, and
ensures that those fields are set correctly. It also adds fields to
track what streams can go on a circuit, and adds functions to see
whether a streams can go on a circuit and update the circuit
accordingly. Those functions aren't yet called.
Proposal 171 gives us a new syntax for parsing client port options.
You can now have as many FooPort options as you want (for Foo in
Socks, Trans, DNS, NATD), and they can have address:port arguments,
and you can specify the level of isolation on those ports.
Additionally, this patch refactors the client port parsing logic to
use a new type, port_cfg_t. Previously, ports to be bound were
half-parsed in config.c, and later re-parsed in connection.c when
we're about to bind them. Now, parsing a port means converting it
into a port_cfg_t, and binding it uses only a port_cfg_t, without
needing to parse the user-provided strings at all.
We should do a related refactoring on other port types. For
control ports, that'll be easy enough. For ORPort and DirPort,
we'll want to do this when we solve proposal 118 (letting servers
bind to and advertise multiple ports).
This implements tickets 3514 and 3515.
This adds a little code complexity: we need to remember for each
node whether it supports the right feature, and then check for each
connection whether it's exiting at such a node. We store this in a
flag in the edge_connection_t, and set that flag at link time.
- Conform to make check-spaces
- Build without warnings from passing size_t to %d
- Use connection_get_inbuf_len(), not buf_datalen (otherwise bufferevents
won't work).
- Don't log that we're using this feature at warn.
Previously we were using router_get_by_id(foo) to test "do we have a
descriptor that will let us make an anonymous circuit to foo". But
that isn't right for microdescs: we should have been using node_t.
Fixes bug 3601; bugfix on 0.2.3.1-alpha.
Instead, use compare_tor_addr_to_node_policy everywhere.
One advantage of this is that compare_tor_addr_to_node_policy can
better distinguish 0.0.0.0 from "unknown", which caused a nasty bug
with microdesc users.
Previously, we had an issue where we'd treat an unknown address as
0, which turned into "0.0.0.0", which looked like a rejected
address. This meant in practice that as soon as we started doing
comparisons of unknown uint32 addresses to short policies, we'd get
'rejected' right away. Because of the circumstances under which
this would be called, it would only happen when we had local DNS
cached entries and we were looking to launch new circuits.
* Add some utility transport functions in circuitbuild.[ch] so that we
can use them from pt.c.
* Make the accounting system consider traffic coming from proxies.
* Make sure that we only fetch bridge descriptors when all the
transports are configured.
Rationale: right now there seems to be no way for our bootstrap
status to dip under 100% once it has reached 100%. Thus, recording
broken connections after that point is useless, and wastes memory.
If at some point in the future we allow our bootstrap level to go
backwards, then we should change this rule so that we disable
recording broken connection states _as long as_ the bootstrap status
is 100%.
- We were reporting the _bottom_ N failing states, not the top N.
- With bufferevents enabled, we logged all TLS states as being "in
bufferevent", which isn't actually informative.
- When we had nothing to report, we reported nothing too loudly.
- Also, we needed documentation.
This code lets us record the state of any outgoing OR connection
that fails before it becomes open, so we can notice if they're all
dying in the same SSL state or the same OR handshake state.
More work is still needed:
- We need documentation
- We need to actually call the code that reports the failure when
we realize that we're having a hard time connecting out or
making circuits.
- We need to periodically clear out all this data -- perhaps,
whenever we build a circuit successfully?
- We'll eventually want to expose it to controllers, perhaps.
Partial implementation of feature 3116.
It's very easy for nodelist_add_node_family(sl,node) to accidentally
add 'node', and kind of hard to make sure that it omits it. Instead
of taking pains to leave 'node' out, let's instead make sure that we
always include it.
I also rename the function to nodelist_add_node_and_family, and
audit its users so that they don't add the node itself any longer,
since the function will take care of that for them.
Resolves bug 2616, which was not actually a bug.
Previously, we'd just take all the nodes in EntryNodes, see which
ones were already in the guard list, and add the ones that weren't.
There were some problems there, though:
* We'd add _every_ entry in EntryNodes, and add them in the order
they appeared in the routerlist. This wasn't a problem
until we added the ability to give country-code or IP-range
entries in the EntryNodes set, but now that we did, it is.
(Fix: We now shuffle the entry nodes before adding them; only
add up to 10*NumEntryGuards)
* We didn't screen EntryNodes for the Guard flag. That's okay
if the user has specified two or three entry nodes manually,
but if they have listed a whole subcontinent, we should
restrict ourselves to the entries that are currently guards.
(Fix: separate out the new guard from the new non-guard nodes,
and add the Guards first.)
* We'd prepend new EntryNodes _before_ the already configured
EntryNodes. This could lead to churn.
(Fix: don't prepend these.)
This patch also pre-screens EntryNodes entries for
reachableaddresses/excludenodes, even though we check for that
later. This is important now, since we cap the number of entries
we'll add.
Just looking at the "latest" consensus could give us a microdesc
consensus, if microdescs were enabled. That would make us decide
that every routerdesc was unlisted in the latest consensus and drop
them all: Ouch.
Fixes bug 3113; bugfix on 0.2.3.1-alpha.
We have an invariant that a node_t should have an md only if it has
a routerstatus. nodelist_purge tried to preserve this by removing
all nodes without a routerstatus or a routerinfo. But this left
nodes with a routerinfo and a microdesc untouched, even if they had
a routerstatus.
Bug found by frosty_un.
All of the routerset_contains*() functions return 0 if their
routerset_t argument is NULL. Therefore, there's no point in
doing "if (ExcludeNodes && routerset_contains*(ExcludeNodes...))",
for example.
This patch fixes every instance of
if (X && routerstatus_contains*(X,...))
Note that there are other patterns that _aren't_ redundant. For
example, we *don't* want to change:
if (EntryNodes && !routerstatus_contains(EntryNodes,...))
Fixes#2797. No bug here; just needless code.
Previously, we'd get a new descriptor for free when
public_server_mode() changed, since it would count as
affects_workers, which would call init_keys(), which would make us
regenerate a new descriptor. But now that we fixed bug 3263,
init_keys() is no longer necessarily a new descriptor, and so we
need to make sure that public_server_mode() counts as a descriptor
transition.
The issue was that we overlooked the possibility of reverse DNS success
at the end of connection_ap_handshake_socks_resolved(). Issue discovered
by katmagic, thanks!
Returning a tristate is needless here; we can just use the yielded
transport/proxy_type field to tell whether there's a proxy, and have
the return indicate success/failure.
Also, store the proxy_type in the or_connection_t rather than letting
it get out of sync if a configuration reload happens between launching
the or_connection and deciding what to say with it.
- const-ify some transport_t pointers
- Remove a vestigial argument to parse_bridge_line
- Make it compile without warnings on my laptop with
--enable-gcc-warnings
We were using strncpy before, which isn't our style for stuff like
this.
This isn't a bug, though: before calling strncpy, we were checking
that strlen(src) was indeed == HEX_DIGEST_LEN, which is less than
sizeof(dst), so there was no way we could fail to NUL-terminate.
Still, strncpy(a,b,sizeof(a)) is an idiom that we ought to squash
everyplace.
Fixes CID #427.
Using strncpy meant that if listenaddress were ever >=
sizeof(sockaddr_un.sun_path), we would fail to nul-terminate
sun_path. This isn't a big deal: we never read sun_path, and the
kernel is smart enough to reject the sockaddr_un if it isn't
nul-terminated. Nonetheless, it's a dumb failure mode. Instead, we
should reject addresses that don't fit in sockaddr_un.sun_path.
Coverity found this; it's CID 428. Bugfix on 0.2.0.3-alpha.
When we rejected a descriptor for not being the one we wanted, we
were letting the parsed descriptor go out of scope.
Found by Coverity; CID # 30.
Bugfix on 0.2.1.26.
(No changes file yet, since this is not in any 0.2.1.x release.)
Every node_t has either a routerinfo_t or a routerstatus_t, so every
node_t *should* have a nickname. Nonetheless, let's make sure in
hex_digest_nickname_matches().
Should quiet CID 434.
This is a little error-prone when the local has a different type
from the parameter, and is very error-prone with both have the same
type. Let's not do this.
Fixes CID #437,438,439,440,441.
For some inexplicable reason, Coverity departs from its usual
standards of avoiding false positives here, and warns about all
sscanf usage, even when the formatting strings are totally safe.
Addresses CID # 447, 446.
Previously, fetch_from_buf_socks() might return 0 if there was still
data on the buffer and a subsequent call to fetch_from_buf_socks()
would return 1. This was making some of the socks5 unit tests
harder to write, and could potentially have caused misbehavior with
some overly verbose SOCKS implementations. Now,
fetch_from_buf_socks() does as much processing as it can, and
returns 0 only if it really needs more data. This brings it into
line with the evbuffer socks implementation.
We added this back in 0649fa14 in 2006, to deal with the case where
the client unconditionally sent us authentication data. Hopefully,
that's not needed any longer, since we now can actually parse
authentication data.
This change also requires us to add and use a pair of
allocator/deallocator functions for socks_request_t, instead of
using tor_malloc_zero/tor_free directly.
In the code as it stood, we would accept any number of socks5
username/password authentication messages, regardless of whether we
had actually negotiated username/password authentication. Instead,
we should only accept one, and only if we have really negotiated
username/password authentication.
This patch also makes some fields of socks_request_t into uint8_t,
for safety.
Multiple Bridge lines can point to the same one ClientTransportPlugin
line, and we can have multiple ClientTransportPlugin lines in our
configuration file that don't match with a bridge. We also issue a
warning when we have a Bridge line with a pluggable transport but we
can't match it to a ClientTransportPlugin line.
* Renamed transport_info_t to transport_t.
* Introduced transport_get_by_name().
* Killed match_bridges_with_transports().
We currently *don't* detect whether any bridges miss their transports,
of if any transports miss their bridges.
* Various code and aesthetic tweaks and English language changes.
A couple of places in control.c were using connection_handle_write()
to flush important stuff (the response to a SIGNAL command, an
ERR-level status event) before Tor went down. But
connection_handle_write() isn't meaningful for bufferevents, so we'd
crash.
This patch adds a new connection_flush() that works for all connection
backends, and makes control.c use that instead.
Fix for bug 3367; bugfix on 0.2.3.1-alpha.
