Explicitly inform the operator of the rejected relay to set a valid email
address in the ContactInfo field and contact bad-relays@ mailing list.
Fixes#25170
Signed-off-by: David Goulet <dgoulet@torproject.org>
At this commit, the SocksSocketsGroupWritable option is renamed to
UnixSocksGroupWritable. A deprecated warning is triggered if the old option is
used and tor will use it properly.
Fixes#24343
Signed-off-by: David Goulet <dgoulet@torproject.org>
On slow system, 1 msec between one read and the other was too tight. For
instance, it failed on armel with a 4msec gap:
https://buildd.debian.org/status/package.php?p=tor&suite=experimental
Increase to 10 msec for now to address slow system. It is important that we
keep this OP_LE test in so we make sure the msec/usec/nsec read aren't
desynchronized by huge gaps. We'll adjust again if we ever encounter a system
that goes slower than 10 msec between calls.
Fixes#25113
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove a series of connection counters that were only used when dumping the
rephist statistics with SIGUSR1 signal.
This reduces the or_history_t structure size.
Closes#25163
Signed-off-by: David Goulet <dgoulet@torproject.org>
Services can keep rendezvous circuits for a while so don't log them if tor is
a single onion service.
Fixes#25116
Signed-off-by: David Goulet <dgoulet@torproject.org>
If the cache is using 20% of our maximum allowed memory, clean 10% of it. Same
behavior as the HS descriptor cache.
Closes#25122
Signed-off-by: David Goulet <dgoulet@torproject.org>
This reverts commit 9a06282546.
It appears that I misunderstood how the seccomp2 filter rules
interact. It appears that `SCMP_ACT_ERRNO()` always takes
precedence over `SCMP_ACT_ALLOW()` -- I had thought instead that
earlier rules would override later ones. But this change caused bug
25115 (not in any released Tor).
The accurate address of a connection is real_addr, not the addr member.
channel_tls_get_remote_addr_method() now returns real_addr instead.
Fixes#24952; bugfix on 707c1e2 in 0.2.4.11-alpha.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Tor preemptiely builds circuits and they can be cannibalized later in their
lifetime. A Guard node can become unusable (from our guard state) but we can
still have circuits using that node opened. It is important to not pick those
circuits for any usage through the cannibalization process.
Fixes#24469
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 0.3.2.1-alpha, we've added notify_networkstatus_changed() in order to have
a way to notify other subsystems that the consensus just changed. The old and
new consensus are passed to it.
Before this patch, this was done _before_ the new consensus was set globally
(thus NOT accessible by getting the latest consensus). The scheduler
notification was assuming that it was set and select_scheduler() is looking at
the latest consensus to get the parameters it might needs. This was very wrong
because at that point it is still the old consensus set globally.
This commit changes the notify_networkstatus_changed() to be the "before"
function and adds an "after" notification from which the scheduler subsystem
is notified.
Fixes#24975
This is the quick fix that is keeping the channel in PENDING state so if we
ever try to reschedule the same channel, it won't happened.
Fixes#24700
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is possible in normal circumstances that a client fetches a descriptor
that has a lower revision counter than the one in its cache. This can happen
due to HSDir desync.
Fixes#24976
Signed-off-by: David Goulet <dgoulet@torproject.org>
In 0.3.2.1-alpha, we've added this function in order to have a way to notify
other subsystems that the consensus just changed. The old consensus and the
new one are passed to it.
Before this patch, this was done _before_ the new consensus was set globally
(thus NOT accessible by getting the latest consensus). The scheduler
notification was assuming that it was set and select_scheduler() is looking at
the latest consensus to get the parameters it might needs. This was very wrong
because at that point it is still the old consensus set globally.
With this commit, notify_networkstatus_changed() has been moved _after_ the
new consensus is set globally. The main obvious reasons is to fix the bug
described above and in #24975. The other reason is that this notify function
doesn't return anything which could be allowing the possibility of refusing to
set the new consensus on error. In other words, the new consensus is set right
after the notification whatever happens.
It does no harm or change in behavior to set the new consensus first and then
notify the subsystems. The two functions currently used are for the control
port using the old and new consensus and sending the diff. The second is the
scheduler that needs the new consensus to be set globally before being called.
Of course, the function has been documented accordinly to clearly state it is
done _after_ the new consensus is set.
Fixes#24975
Signed-off-by: David Goulet <dgoulet@torproject.org>
Stop adding unneeded channel padding right after we finish flushing
to a connection that has been trying to flush for many seconds.
Instead, treat all partial or complete flushes as activity on the
channel, which will defer the time until we need to add padding.
This fix should resolve confusing and scary log messages like
"Channel padding timeout scheduled 221453ms in the past."
Fixes bug 22212; bugfix on 0.3.1.1-alpha.
I think technically we could resolve bug 22212 by adding a call to
channel_timestamp_active() only in the finished_flushing case. But I added
a call in the flushed_some case too since that seems to more accurately
reflect the notion of "active".
I'm leaving the getsockname code in transproxy alone, since it is
comparatively isolated, rather platform-specific, and hard to test.
Implements 18105.
We'd been using crypto_digest_dup() and crypto_digest_assign() here,
but they aren't necessary. Instead we can just use the stack to
store the previous state of the SHA_CTX and avoid a malloc/free pair.
Closes ticket 24914.
This patch updates the HiddenServiceVersion man-page entry to only
accept either 2 or 3 as argument and not a list of multiple versions.
See: https://bugs.torproject.org/25026
In order to make the OR and dir checking functions in router.c less confusing
we renamed some functions and splitted consider_testing_reachability() into
router_should_check_reachability() and router_do_reachability_checks(). Also we
improved the documentation.
Fixes#18918.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Previously, we wouldn't do this when running with a routerinfo_t in
some cases, leading to many needless calls to the protover module.
This change also cleans up the code in nodelist.c a bit.
Fixes bug 25008; bugfix on 0.2.9.4-alpha.
Without this patch, not only will TLS1.3 not work with Tor, but
OpenSSL 1.1.1 with TLS1.3 enabled won't build any connections at
all: It requires that either TLS1.3 be disabled, or some TLS1.3
ciphersuites be listed.
Closes ticket 24978.
For 23847, we want Tor to be able to shut down and then restart in
the same process. Here's a patch to make the Tor binary do that.
To test it, you need to build with --enable-restart-debugging, and
then you need to set the environment variable TOR_DEBUG_RESTART.
With this option, Tor will then run for 5 seconds, then restart
itself in-process without exiting. This only happens once.
You can change the 5-second interval using
TOR_DEBUG_RESTART_AFTER_SECONDS.
Implements ticket 24583.
Fix an "off by 2" error in counting rendezvous failures on the onion
service side.
While we thought we would stop the rendezvous attempt after one failed
circuit, we were actually making three circuit attempts before giving up.
Fixes bug 24895; bugfix on 0.0.6.
